--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/usr/src/cmd/terminfo/misc.ti Tue Jun 14 00:00:00 2005 -0700
@@ -0,0 +1,780 @@
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License, Version 1.0 only
+# (the "License"). You may not use this file except in compliance
+# with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+#
+# Copyright 1996 Sun Microsystems, Inc. All rights reserved.
+# Use is subject to license terms.
+#
+
+# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
+# All Rights Reserved
+
+#ident "%Z%%M% %I% %E% SMI"
+# # --------------------------------
+#
+# misc: MISCELLANEOUS TERMINALS
+#
+# Manufacturer: MISCELLANEOUS TERMINALS
+# Class: III
+#
+# Info:
+# This file is for manufacturers with only a few terminals.
+# They are included alphabetically by manufacturer. Hard copy
+# terminals, personal computers, special "made up" terminals
+# and homemade terminals go in separate files.
+#
+aed512|aed|AED 512,
+ cr=^M, cud1=^J, bel=^G,
+ cols#64, lines#40, clear=^L,
+ cub1=^H, cuf1=\Ei0800\001,
+ cnorm=\E\072004=000200??\001,
+ flash=\EK0001??0000K0001202080\001,
+ smso=\E\07200>8000140[80C00\001, rmso=\E[00C80\001,
+ smul=\E\07200>8000140\001, rmul=\E\07200>8000100\001,
+ uc=\Ei???>l0800i0102\001,
+ smcup=\E\07200>8000140{<04<0??00001010L<0\072004=0002??00\001,
+ rmcup=\E\07200>8000100{804<0??00001000L80\072004=000200??\001,
+ ind=\E;1100\072004=000200??;1300\047\200\001\n\E\072004=0002??00;1200\001\n,
+ cuu1=^K, .cup=\E;1300%p1%c%p2%c\001,
+ampex|d80|dialogue|dialogue80|ampex dialogue 80,
+ tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G,
+ is2=\EA, ul, smul=\El, rmul=\Em,
+ am, bw, cub1=^H, ht=^I, clear=\E*$<75>, cup=\E=%p1%' '%+%c%p2%' '%+%c,
+ il1=\EE$<5*>, cbt=\EI, ich1=\EQ, dl1=\ER$<5*>, dch1=\EW,
+ el=\Et, ed=\Ey, smso=\Ej, rmso=\Ek, lines#24, cols#80, cuf1=^L, cuu1=^K,
+# Info:
+# Tue Aug 9 20:11:37 1983
+# No backspace key in the main QWERTY cluster. Fortunately,
+# it has a NEWLINE/PAGE key just above RETURN that sends a strange
+# single-character code. Given a suitable Unix (one that lets you
+# set an echo-erase-as-BS-SP-BS mode), this key can be used as
+# the erase key; I find I like this. Because some people and
+# some systems may not, there is another termcap ("ax175e") that
+# suppresses this little eccentricity by omitting the relevant
+# capability.
+#
+# Problems:
+# - I haven't done tab-setting yet.
+# - The initialization sequence doesn't use the terminal's
+# reset-everything code because it would require a delay
+# in the middle of the is sequence.
+#
+ampex175|ampex d175,
+ cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H,
+ ed=\Ey, el=\Et, clear=\E+, cup=\E=%p1%' '%+%c%p2%' '%+%c,
+ cols#80, dch1=\EW, dl1=\ER,
+ home=\036, ich1=\EQ, is2=\EX\EA\EF,
+ kcud1=^J, khome=\036, kcub1=^H, kcuf1=^L,
+ kcuu1=^K, kil1=\EE, kdl1=\ER, kich1=\EQ, kdch1=\EW,
+ lines#24, ll=\036^K, cuf1=^L,
+ rmso=\Ek, smso=\Ej, rmcup=\EF, smcup=\EN, rmul=\Em, cuu1=^K,
+ smul=\El,
+ampex175-b|ampex d175 using left arrow for erase,
+ kbs=^_, use=ampex175,
+# Info:
+# Below are the termcap entries I've been using. The problem
+# with scrolling in vi can only be fixed by getting BBN to put
+# smarter scroll logic in the terminal or changing vi or padding
+# scrolls with about 500 ms delay.
+#
+# I always thought the problem was related to the terminal
+# counting newlines in its input buffer before scrolling and
+# then moving the screen that much. Then vi comes along and
+# paints lines in on the bottom line of the screen, so you get
+# this big white gap.
+#
+# We have not had sufficient demand for vi (most use emacs or
+# rand) here to fix this problem.
+#
+# [Sounds like the BitGraph should stop looking ahead when it
+# sees escape - ]
+#
+bitgraph|bbn bitgraph,
+ use=bg3.10rv,
+bg3.10rv|bgrv|bbn bitgraph (reverse video),
+ use=bg2.0rv,
+bg3.10nv|bgnv|bbn bitgraph (normal video),
+ use=bg2.0nv,
+bg3.10|bgn|bbn bitgraph (no init),
+ use=bg2.0,
+bg2.0rv|bbn bitgraph (reverse video),
+ is2=\E>\E[?5h\E[?7h, flash=\E[?5l\E[?5h, use=bg2.0,
+bg2.0nv|bbn bitgraph (normal video),
+ is2=\E>\E[?5l\E[?7h, flash=\E[?5h\E[?5l, use=bg2.0,
+bg2.0|bbn bitgraph (no init),
+ cr=^M, cud1=^J, bel=^G,
+ il1=\E[L$<2*>, cub1=^H, ed=\E[J$<150>, el=\E[K$<2>,
+ clear=\E[H\E[J$<150>, cup=%i\E[%p1%d;%p2%dH, cols#85, csr=\E[%i%p1%d;%p2%dr,
+ dl1=\E[M$<2*>, cud1=\E[B, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kcud1=\E[B, rmkx=\E>, kcub1=\E[D, kcuf1=\E[C, smkx=\E=,
+ kcuu1=\E[A, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, lines#64,
+ cuf1=\E[C, ht=^I, rc=\E8, sc=\E7, rmso=\E[0m, ind=\n$<280>,
+ smso=\E[7m, cuu1=\E[A, xenl,
+bg1.25rv|bbn bitgraph (reverse video),
+ flash=\E[?5l\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25,
+bg1.25nv|bbn bitgraph (normal video),
+ is2=\E>\E[?5l\E[?7h, flash=\E[?5h\E[?5l, use=bg1.25,
+bg1.25|bbn bitgraph,
+ cr=^M, cud1=^J, bel=^G, il1=\E[L$<2*>, cub1=^H,
+ ed=\E[J$<150>, el=\E[K$<2>, clear=\E[H\E[J$<150>, cup=%i\E[%p1%d;%p2%dH,
+ cols#85, dl1=\E[M$<2*>, cud1=\E[B, kf1=\EP, kf2=\EQ, kf3=\ER,
+ kf4=\ES, kcud1=\EB, rmkx=\E>, kcub1=\ED, kcuf1=\EC, smkx=\E=,
+ kcuu1=\EA, lines#64, ll=\E[64;1H, lf1=PF1, lf2=PF2, lf3=PF3,
+ lf4=PF4, cuf1=\E[C, ht=^I, rmso=\E[0m, ind=\n$<280>,
+ smso=\E[7m, cuu1=\E[A,
+ca22851|computer automation 22851,
+ cr=^M, cud1=^J, ind=^J, bel=^G, cup=\02%i%p1%c%p2%c, cols#80,
+ lines#24, clear=^L$<8>, am, cub1=\025, cuu1=\026, home=\036,
+ el=\035, ed=\034, cuf1=\011, kcub1=\025, kcuu1=\026,
+ kcud1=\027, khome=\036,
+# Info:
+# CHROMATICS
+# Following is revised version. As I mentioned, I recompiled
+# curses in order to accomadate the large amount of definition.
+# I have put the long strings in ti/te. Ti sets up a window
+# that is smaller than the screen, and puts up a warning message
+# outside the window. Te erases the warning message, puts the
+# window back to be the whole screen, and puts the cursor at just
+# below the small window. A defined vs and ve to really turn
+# the cursor on and off, but I have taken this out since I don't
+# like the cursor being turned off when vi exits.
+#
+cg7900|chromatics|chromatics 7900,
+ cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#40, am,
+ clear=^L, cub1=^H, cup=^AM%p2%d\,%p1%d\,, cuf1=\035, cuu1=^K,
+ home=\034, ll=^A|, el=^A`, ed=^Al, il1=^A>2, dl1=^A<2,
+ ich1=^A>1, dch1=^A<1,
+ smso=^AC4\,^Ac7\,, rmso=^AC1\,^Ac2\,, uc=^A^A_^A\0,
+ smcup=^AP0^AO1^AR1^AC4\,^Ac0\,^L^AM0\,42\,WARNING DOUBLE ENTER ESCAPE and ^U^AC1\,^Ac2\,^AW0\,0\,79\,39\,,
+ rmcup=^AW0\,40\,85\,48\,^L^AW0\,0\,85\,48\,^AM0\,40\,,
+cops10|cops|cops-10|,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, bw, ed=^w, el=^v,
+ clear=30^x, cup=^p%p1%' '%+%c%p2%' '%+%c, cols#80, cud1=\n, kbs=^h, kcud1=\n,
+ khome=^y, kcub1=^h, kcuf1=^l, kcuu1=^k, lines#24, cuf1=^l,
+ cuu1=^k,
+# Info:
+# CYBERNEX
+# We recently discovered (it wasn't clearly documented) that the
+# Cybernex XL-83 terminal has a reverse-scroll capability; I
+# enclose a revised termcap entry with "sr" added.
+#
+xl83|cybernex XL-83,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=^P$<62>, el=^O$<3>,
+ clear=^L$<62>, cup=^W%p1%' '%+%c%p2%' '%+%c, cols#80, home=^K,
+ kcud1=^J, kcub1=^H, kcuf1=^I, kcuu1=^N,
+ lines#24, cuu1=^N, cuf1=^I, ri=^N,
+mdl110|cybernex mdl-110,
+ cup=^P%p1%' '%+%c%p2%' '%+%c, cols#80, lines#24, am, clear=^X$<70>,
+ cub1=^H, cr=^M, cud1=^J, ind=^J, bel=^G, cuf1=^U, cuu1=^Z, home=^Y,
+ el=^N@^V$<145>, ed=^NA^W$<145>, il1=^NA^N^]$<65>, dl1=^NA^N^^$<40>,
+ ich1=^NA^]$<3.5>, dch1=^NA^^$<3.5>, smso=^NF, rmso=^NG,
+ ht=\t$<43>, ed=^N@^V$<6>,
+# Info:
+# DATA GENERAL
+#
+# It has one or two quirks, though; in vi you have to use <cr> to
+# advance to the next line instead of just hitting the big NEWLINE
+# key (which is cursor down to vi).
+#
+# One pain with using the dasher on unix though is the fact
+# that they use # ^H for home cursor. This causes problems with
+# reading news and help files on the system that assume ^H is
+# backspace.
+#
+# The trouble with this terminal is that you can't give it a
+# linefeed without having it add a carriage return. And there
+# isn't any switch that will turn off auto carriage return
+# on receipt of linefeed.
+#
+# Is there any way around this? [I used cud1=^Z to try to
+# describe this -]
+#
+d200|d100|data general dasher 200,
+ am, bel=^G, bw, clear=^L, cols#80, cr=^M,
+ cub1=^Y, cud1=^Z, cuf1=^X, cup=^P%p2%c%p1%c, cuu1=^W,
+ el=^K, home=^H, ind=^J, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W,
+ kf0=^^z, kf1=^^q, kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w,
+ kf8=^^x, kf9=^^y, khome=^H, lf0=f10,
+ lines#24, nel=^J, rmso=^^E, rmul=^U, smso=^^D, smul=^T,
+dg|dg6053|data general 6053,
+ cr=^M, cud1=^J, ind=^J, bel=^G,
+ am, cub1=^H, cup=^P%p2%c%p1%c, clear=^L, home=^H, cuf1=^S,
+ cuu1=^W, el=^K, cols#80, lines#24,
+d132|datagraphix|datagraphix 132a,
+ cr=^M, cud1=^J, ind=^J, bel=^G,
+ cols#80, lines#30, clear=^l, home=\Et, da, db, ind=\Ev, ri=\Ew,
+ cuu1=\Ek, cuf1=\El, cvvis=\Ex, cnorm=\Em\En,
+ il1=\E3, ich1=\E5, dch1=\E6, in, ich1=\E5,
+# Info:
+# DATAPOINT (see also pc)
+#
+datapoint|dp3|dp3360|datapoint 3360,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
+ ed=^_, el=^^, clear=^]^_, cols#82, home=^], lines#25, cuf1=^x, cuu1=^z,
+# Info:
+# DELTA DATA
+# This is untested. The cup sequence is hairy enough that it
+# probably needs work. The idea is ctrl(O), dd(row), dd(col),
+# where dd(x) is x - 2*(x%16) + '9'
+#
+delta|dd5000|delta data 5000,
+ cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^NR,
+ cup=^O%p1%p1%{16}%m%{2}%*%-%'9'%+%c%p2%p2%{16}%m%{2}%*%-%'9'%+%c,
+ cols#80, lines#27, home=^NQ, cuf1=^Y, cuu1=^Z, el=^NU, dch1=^NV,
+digilog|333|digilog 333,
+ cub1=^H, cols#80, el=\030, home=^n, lines#16, cuf1=^i, cuu1=^o,
+ cr=^M, cud1=^J, ind=^J, bel=^G,
+# Info:
+# DIRECT
+# I think the direct is supposed to be vt100 compatible, so all
+# this should probably be replaced by a use=vt100, but I can't
+# test it.
+#
+d800|direct|direct800|direct 800/a,
+ cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, am,
+ clear=\E[1;1H\E[2J, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
+ cuf1=\E[C, cuu1=\E[A, el=\E[K, ed=\E[J, smso=\E[7m, rmso=\E[0m,
+ smul=\E[4m, rmul=\E[0m, xhp, cvvis=\E[>12l, cnorm=\E[>12h,
+ ind=\ED, ri=\EM, da, db, smacs=\E[1m, rmacs=\E[0m, msgr, ht=^I,
+ kcub1=\E[D, kcuf1=\E[C, kcuu1=\E[A, kcud1=\E[B,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+env230|envision230|envision 230 graphics terminal,
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>,
+ el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t,
+ hts=\EH, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b,
+ kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
+ kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+ kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m$<2>,
+ ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>, rmso=\E[0m<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+ sgr0=\E[m^O$<2>, smacs=^N, smkx=\E[?1h\E=, smso=\E[1m<2>,
+ smul=\E[4m$<2>, tbc=\E[3g,
+falco|ts1|ts-1|falco ts-1,
+ cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, ht=^I,
+ is2=\Eu\E3, il1=\EE, am, el=\ET\EG0^H, cup=\E=%p1%' '%+%c%p2%' '%+%c,
+ clear=\E*, ed=\EY, dch1=\EW, cub1=^H, dl1=\ER, rmir=\Er, smir=\Eq,
+ home=^^, kf0=^A0\r, kcud1=^J, kcub1=^H, kcuf1=^L, kcuu1=^K, cuf1=^L,
+ rmso=\Eg0, smso=\Eg1, cuu1=^K, smul=\Eg1, rmul=\Eg0,
+# Info:
+# For falcos with the paging option (very nice it turns out -
+# they can store several hundred lines of text, as well as have
+# a separate screen for vi and other such programs usage)...
+#
+falco-p|falco-tsl-1sp|falco with paging option,
+ cr=^M, cud1=^J, ind=^J, bel=^G, is2=\EZ\E3\E_c, il1=\EE, am,
+ cub1=^H, el=\ET\EG0^H\Eg0, clear=\E*, ed=\EY, cols#80,
+ dch1=\EW, dl1=\ER, kcud1=\E[B, kcub1=\E[D, rmir=\Er, smir=\Eq,
+ ht=^I, db, kcuf1=\E[C, kcuu1=\E[A, lines#24, cuf1=\E[C,
+ rmso=\Eg0, smso=\Eg4, cuu1=\E[A, smul=\Eg1, smcup=\E_d,
+ rmcup=\E_b, rmul=\Eg0, cud1=\E[B, cup=\E=%p1%' '%+%c%p2%' '%+%c,
+ msgr, ul, khome=\E[H, da, mir, cbt=\EI,
+ts100|ts100-sp|falco ts100-sp,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
+ el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
+ ht=\t, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n,
+ is1=\E~)\E~ea, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b,
+ kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
+ kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+ kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>,
+ rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+ sgr0=\E[m^O$<2>, smacs=^N, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ts100-ctxt|falco ts-100 saving context,
+ smcup=\E~_d\E[2J, rmcup=\E~_b, use=ts100,
+# Info:
+# FLUKE
+# The 1720a differences from ANSI: no auto margin, destructive
+# tabs, # of lines, funny highlighting and underlining
+#
+f1720|f1720a|fluke 1720A,
+ cr=^M, ind=^J, cud1=^J, bel=^G,
+ is2=\E[;H\E[2J, cols#80, lines#16,
+ cuu1=\E[A, cud1=\E[B, cuf1=\E[C, cub1=^H, cup=\E[%i%p1%d;%p2%dH,
+ ind=\ED, ri=\EM,
+ kcuu1=\034, kcud1=\035, kcuf1=\036, kcub1=\037,
+ smso=\E[7m, rmso=\E[m, xmc#1,
+ smul=\E[4m, rmul=\E[m,
+ el=\E[K, ed=\E[J,
+ xt, clear=\E[;H\E[2J,
+# Info:
+# INTERTEC
+# Intertec: I can't tell if these are the same terminal or not.
+# the cup entries are different. The it2 looks suspiciously
+# like an an Adds Regent 100, complete with the bug [mrh].
+#
+it|intertube|intertec|Intertec InterTube,
+ cr=^M, ind=^J, cud1=^J, bel=^G, cub1=^H, am,
+ clear=^L, home=^A, cuu1=^Z, cuf1=^F,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c$<50>,
+ smso=\E0P, rmso=\E0@, cols#80, lines#25,
+# Info:
+# The intertube 2 has the "full duplex" problem like the tek
+# 4025: if you are typing and a command comes in, the keystrokes
+# you type get interspersed with the command and it messes up.
+#
+it2|intertube2|intertec data systems intertube 2,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
+ clear=^L, cols#80, home=^A, lines#25, cuu1=^Z, el=\EK,
+ hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c, vpa=^K%p1%c,
+ cup=^N%p1%c^P%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
+ cuf1=^F, cud1=\n, ll=^K^X\r, smso=\E0P, rmso=\E0@,
+superbrain|intertec superbrain,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=\E~k<10*>,
+ el=\E~K$<15>, bw, clear=\f$<5*>,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c$<20>, cols#80,
+ kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^K, lines#24,
+ cuf1=^F, ht=^I, rmcup=\f, smcup=\f, cuu1=^k,
+# FREEDOM 100 by Liberty Electronics USA, SF.
+f100|freedom|freedom100|freedom model 100,
+ am, bw, hs, mir, msgr, xon,
+ cols#80, lines#24,
+ acsc=+.'\,.-jHkGlFmEqKxJ, bel=^G, cbt=\EI, clear=^Z,
+ cr=\r, cub1=\b, cud1=\n, cuf1=\f,
+ cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
+ flash=\Eb$<50>\Ed, fsl=\r, home=^^,
+ hpa=\E]%p1%'\s'%+%c, ht=\t, hts=\E1, il1=\EE$<8.5*>,
+ ind=\n, ip=$<6>, is2=\Eg\Ef\r\Ed, kbs=\b, kcub1=\b,
+ kcud1=^V, kcuf1=\f, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej,
+ rmacs=\E%, rmir=\Er, rmso=\EG0, rmul=\EG0, smacs=\E$,
+ smir=\Eq, smso=\EG4, smul=\EG8, tbc=\E3, tsl=\Eg\Ef,
+ vpa=\E[%p1%'\s'%+%c,
+f100-rv|freedom-rv|freedom 100 in reverse video,
+ is2=\Eg\Ef\r\Eb, flash=\Ed$<50>\Eb, use=f100,
+#
+# Problem with vi(1). Liberty terminals use the ^V
+# code for the down cursor key. When kcud1 is defined in terminfo
+# as ^V, the Control Character Quoting capability (^V in insert mode)
+# is lost! It cannot be remapped in vi because it is necessary to enter
+# a ^V to to quote the ^V that is being remapped!!!
+#
+# f110 users will have to decide whether
+# to lose the down cursor key or the quoting capability. We will opt
+# initially for leaving the quoting capability out, since use of VI
+# is not generally applicable to most interactive applications
+#
+# The same applies to f200 users, except that another option exists.
+# This option has been chosen locally. It will not be distributed unless
+# a user runs into this problem and requests assistance. Very few users,
+# if any, should run into this problem. The local solution is in
+# vifix.local.ti. The f200 has the ability to reprogram the down cursor
+# key. The key is reprogrammed to ^J (linefeed). This value is remembered
+# in non-volatile RAM, so powering the terminal off and on will not cause
+# the change to be lost. The terminfo definition for the f200 is changed
+# to identify kcud1 as ^J instead of ^V.
+#
+#
+f110|freedom110|Liberty Freedom 110,
+ am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr,
+ eslok, xon, it#8, wsl#80, cbt=\EI,
+ tbc=\e3, clear=^Z,
+ el=\ET, ed=\EY, hpa=\E]%p1%' '%+%c, vpa=\E[%p1%' '%+%c,
+ cup=\e=%p1%' '%+%c%p2%' '%+%c, cud1=^V, home=^^,
+ cub1=\b, cuf1=^L, cuu1=^K, dch1=\eW,
+ dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2,
+ bold=\eG0, dim=\EG@, rev=\EG4, rmul=\eG0,
+ invis=\eG1, smso=\eG<, smul=\eG8, rmso=\eG0, sgr0=\eG0,
+ flash=\Eb\0\0\0\0\Ed, fsl=\r,
+ il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR,
+ kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K,
+ mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ
+ smir=\eO\eq, rmir=\er\eO, kcud1=^V,
+ cnorm=\e.2, cvvis=\e.2, civis=\e.1,
+f110-14|Liberty Freedom 110 14inch,
+ dch1@,use=f110,
+f110-w|Liberty Freedom 110 - 132 cols,
+ cols#132, use=f110,
+f110-14w|Liberty Freedom 110 14in/132 cols,
+ cols#132, dch1@, use=f110,
+f200|freedom200|Liberty Freedom 200,
+ am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr,
+ eslok, xon, it#8, wsl#80, cbt=\EI,
+ csr=\em0%p1%' '%+%c%p2%' '%+%c, tbc=\e3, clear=^Z,
+ el=\ET, ed=\EY, hpa=\E]%p1%' '%+%c, vpa=\E[%p1%' '%+%c,
+ cup=\e=%p1%' '%+%c%p2%' '%+%c, cud1=^V, home=^^, civis=\e.0,
+ cub1=\b, cnorm=\e.1, cuf1=^L, cuu1=^K, cvvis=\e.1, dch1=\eW,
+ dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2,
+ bold=\eG0, dim=\EG@, smir=\eq, rmir=\er, rev=\EG4, rmul=\eG0,
+ invis=\eG1, smso=\eG<, smul=\eG8, rmso=\eG0, sgr0=\eG0,
+ flash=\Eo\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\en, fsl=\r,
+ il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR, kcud1=^V,
+ kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K,
+ mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ,
+f200-w|Liberty Freedom 200 - 132 cols,
+ cols#132, use=f200,
+f200vi|Liberty Freedom 200 for vi,
+ am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr,
+ eslok, xon, it#8, wsl#80, cbt=\EI,
+ csr=\em0%p1%' '%+%c%p2%' '%+%c, tbc=\e3, clear=^Z,
+ el=\ET, ed=\EY, hpa=\E]%p1%' '%+%c, vpa=\E[%p1%' '%+%c,
+ cup=\e=%p1%' '%+%c%p2%' '%+%c, cud1=^V, home=^^, civis=\e.0,
+ cub1=\b, cnorm=\e.1, cuf1=^L, cuu1=^K, cvvis=\e.1, dch1=\eW,
+ dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2,
+ bold=\eG0, dim=\EG@, smir=\eq, rmir=\er, rev=\EG4, rmul=\eG0,
+ invis=\eG1, smso=\eG<, smul=\eG8, rmso=\eG0, sgr0=\eG0,
+ flash=\Eb\0\0\0\0\Ed, fsl=\r,
+ il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR, kcud1=^J,
+ kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K,
+ mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ,
+f200vi-w|Liberty Freedom 200 - 132 cols for vi,
+ cols#132, use=f200vi,
+omron|omron 8025AG,
+ cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H, ed=\ER,
+ cols#80, el=\EK, clear=\EJ, da, db, dch1=\EP, dl1=\EM, home=\EH,
+ lines#24, cuf1=\EC, rmso=\E4, ind=\ES, smso=\Ef, ri=\ET,
+ cuu1=\EA, cvvis=\EN,
+plasma|plasma panel,
+ am, cub1=^H, clear=^L, cols#85, home=^^, lines#45, cuf1=\030,
+ cuu1=\026, cr=^M, cud1=^J, ind=^J, bel=^G,
+ramtek|ramtek 6000,
+ cr=^M, cud1=^J, ind=^J, bel=^G, lines#24, cols#78, am,
+ clear=[alpha]\n[erase]\n, cub1=^H,
+soroc|iq120|soroc 120,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E*$<2>, cr=\r, cub1=\b, cud1=\n,
+ cuf1=\f, cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K,
+ ed=\EY, el=\ET, home=^^, ind=\n, kcub1=\b, kcud1=\n,
+ kcuf1=\f, kcuu1=^K,
+# Info:
+# Note standout and underline are really sg#1, but when you
+# backspace up the whole screen does standout or underline!
+# The solution is to not specify sg#1 and live with it.
+#
+# iq140 standout and underline are confused. What we have
+# included here are reasonable possiblities for these two.
+# Neither are really correct.
+#
+iq140|soroc 140,
+ cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, am,
+ clear=\E+, cub1=^H, cup=\E=%p1%' '%+%c%p2%' '%+%c, cuf1=^L, cuu1=^K,
+ home=^^, ll=^^^K, el=\Et, ed=\Ey, il1=\Ee$<1*>, dl1=\Er$<.7*>,
+ smir=\E9, cbt=\EI, rmir=\E8, mir, dch1=\Ew, smso=\E\177, rmso=\E\177,
+ kbs=^H, kcuf1=^L, khome=^^, kcuu1=^K, kf0=^A0\r,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, smul=\E^A,
+ rmul=\E^A,
+swtp|ct82|southwest technical products ct82,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, il1=^\^y,
+ ed=^v, el=^F, clear=^L, cup=^k%p2%c%p1%c, cols#82, lines#20, dl1=^z,
+ cuf1=^s, cuu1=^a, smso=^^^v, rmso=^^^F, dch1=^\^h, ich1=^\^x, home=^p,
+ ind=^n, ri=^o, ll=^c,
+ is2=^\^r^^^s^^^d^]^w^i^s^^^]^^^o^]^w^r^i,
+# Info:
+# Another new terminal, tested, seems to work fine with vi.
+#
+synertek|ktm|380|Synertek KTM 3/80 tubeless terminal,
+ am, cub1=^H, cols#80, lines#24, ed=\EJ, el=\EK, clear=^Z,
+ cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, cuf1=^L,
+# Info:
+# TAB
+# The tab 132 uses xon/xoff, so no padding needed.
+# smkx/rmkx have nothing to do with arrow keys.
+# is2 sets 80 col mode, normal video, autowrap on (for am).
+# Seems to be no way to get rid of status line.
+#
+tab132|tab|tab 132/15,
+ am, da, db, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, lm#96, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A$<2>, dch1=\E[P, dl1=\E[M,
+ ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, il1=\E[L,
+ ind=\n, is2=\E[?7h\E[?3l\E[?5l, ka1=\EOq, ka3=\EOs,
+ kb2=\EOr, kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\EOC, kcuu1=\E[A, kent=\EOM,
+ kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
+ kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
+ rmir=\E[4l, rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+ sgr0=\E[m^O$<2>, smacs=^N, smir=\E[4h,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+tab132-w,
+ cols#132, is2=\E[?7h\E[?3h\E[?5l, use=tab132,
+tab132-rv,
+ is2=\E[?7h\E[?3l\E[?5h, use=tab132,
+tab132-w-rv,
+ is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
+# Info:
+# TEC (various terminals labelled "tec" - manufacturers unknown)
+# tec is untested, and taken from CB/Unix virtual terminal driver.
+# Upper case terminal, uses lower case for control sequences!!!
+# The driver shows the C ~ operator used on CM coordinates.
+#
+tec400|tec scope,
+ cr=^M, cud1=^J, ind=^J, bel=^G, cup=l%p2%~%c%p1%~%c,
+ cuu1=x, cud1=h, cuf1=g, cub1=w, home=i, smso={, rmso=|,
+ xmc#1, clear=f, il1=e, dl1=u, ich1=d, dch1=t, el=c, ed=s,
+tec500|tec 500,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
+ cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=^Z$<20>,
+ cols#80, home=^^, lines#24, cuf1=^L, cuu1=^K, smso=^], rmso=^\,
+tec,
+ lines#24, cols#80, clear=^l, cuu1=^k, cuf1=\037, am,
+ cub1=^H, home=\036, cr=^M, cud1=^J, ind=^J, bel=^G,
+teletec|teletec datascreen,
+ cr=^M, cud1=^J, ind=^J, bel=^G,
+ am, cub1=^H, cols#80, clear=^l, home=^^, lines#24, cuf1=^_, cuu1=^k,
+vc404|volker-craig 404,
+ cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, ed=^W$<40>, el=^V$<20>,
+ clear=^X$<40>, cup=^P%p1%' '%+%c%p2%' '%+%c, cols#80, home=^Y$<40>,
+ kcud1=^J, kcub1=^H, kcuf1=^U, kcuu1=^Z, lines#24, cuf1=^U, cuu1=^Z,
+vc404-s|volker-craig 404 w/standout mode,
+ rmso=^O, smso=^N, use=vc404,
+vc404-na|volker-craig 404 w/no arrow keys,
+ kcuf1@, kcuu1@, use=vc404,
+vc404-s-na|volker-craig 404 w/standout mode and no arrow keys,
+ rmso=^O, smso=^N, use=vc404-na,
+vc415|volker-craig 415,
+ clear=^L, use=vc404,
+# Info:
+# Missing in vc303a and vc303 descriptions: they scroll 2 lines
+# at a time every other linefeed.
+#
+vc303-a|vc403a|volker-craig 303a,
+ cr=^M, cud1=^J, bel=^G, am, cub1=^H, el=^V$<20>, clear=^X$<40>,
+ cols#80, home=^Y$<40>, kcud1=^J, kcub1=^H, kcuf1=^U,
+ kcuu1=^Z, lines#24, ll=^P^@W, cuf1=^U, cuu1=^Z,
+vc303|vc103|vc203|volker-craig 303,
+ cr=^M, cud1=^J, bel=^G, am, cub1=^H, clear=^L$<40>, cols#80,
+ home=^K$<40>, kcud1=^J, kcub1=^H, kcuf1=^I, kcuu1=^N, lines#24,
+ ll=^O$<1>W, cuf1=^I, cuu1=^N,
+zen30|z30|zentec 30,
+ cr=^M, cud1=^J, ind=^J, bel=^G, mir, cols#80, lines#24,
+ ul, il1=\EE$<1.5*>, cub1=^H, el=\ET$<1.0*>,
+ cup=\E=%p1%' '%+%c%p2%' '%+%c, clear=\E*, home=^^, cuf1=^L,
+ rmso=\EG0, smso=\EG6, cuu1=^K, smir=\Eq, rmir=\Er,
+ am, dch1=\EW, dl1=\ER$<1.5*>, ed=\EY,
+# Info:
+# COMPUCOLOR, ISC, INTECOLOR (?)
+# These compucolors appear similar, but they at least have
+# different sized screens. I don't know what's going on here.
+#
+# There is further confusion since intecolor seems to call
+# themselves isc too.
+#
+# The following termcap for the Intelligent Systems Corporation
+# 8001 color terminal with lower-case and 48-line options
+# disallows global motion to get around the 2-lines-at-a-time
+# scrolling problem. It has been tested and works fine except
+# when indented lines are scrolled in from the bottom of the
+# screen. The latter problem originates with firmware which
+# interprets NL as NL-CR when the cursor is on the bottom line
+# of the screen.
+#
+8001|isc|isc8001|compucolor 8001,
+ cr=^M$<1>, cud1=^J$<1>, ind=^J$<1>, bel=^G, am, cols#80, lines#47,
+ il1=\EU$<5*>, dl1=\EV^\$<5*>, clear=^L$<31>, smir=^S\EQ$<1>,
+ rmir=^R\EK$<1>, kcub1=^Z, kcuf1=^Y, kcuu1=^\, kcud1=^J, khome=^H,
+ cub1=^Z$<1>, cuf1=^Y$<1>, cuu1=^\$<1>, smul=^Q$<1>, rmul=^R$<1>,
+# cup=^C%p2%c%p1%c,
+compucolor2|compucolorii|compucolor 2,
+ cr=^M, cud1=^J, ind=^J, bel=^G,
+ ht=^I, am, cup=^C%p2%c%p1%c, cub1=^Z, lines#32, cols#64,
+ clear=^L, home=^H, cuf1=^Y, cuu1=^\,
+# Info:
+# INTERACTIVE SYSTEMS
+# smkx/rmkx from dgc, to make insert mode key work in Rand Editor.
+# probably needs more keys defined.
+#
+intext|Interactive Systems Corporation modified owl 1200,
+ cr=^M, cud1=^J, ind=^J, bel=^G, il1=\020$<5.5*>, am, cub1=^_,
+ cub1=^H, cbt=^Y, ed=\026J$<5.5*>, el=^K\160^R,
+ clear=\014$<132>, cup=\017%p1%' '%+%c%p2%' '%+%c, cols#80,
+ dch1=\022$<5.5*>, dl1=\021$<5.5*>, rmir=\026\074,
+ smir=\026\073, ip=$<5.5*>, lines#24, cuf1=\036, ht=^I,
+ cuu1=\034, rmso=^V# , xmc#1, smso=^V$\054,
+ smkx=\036\072\264\026%, rmkx=\269,
+ kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=\034, kbs=^H, khome=^Z,
+ kf1=^VA\r, kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r,
+ kf6=^VF\r, kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, kf0=^VJ\r,
+intext2|intextii|INTERACTIVE modified owl 1251,
+ am, bw, ul, cols#80, lines#24,
+ bel=^G, blink=\E[10\sD, bold=\E[22\sD, cbt=\E[Z,
+ clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%?%p1%t%p1%{1}%+%d%;%?%p2%t%p2%{1}%+;%d%;H,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[0\sD, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ flash=\E[;;;;;;;;;2;;u\E[;;;;;;;;;1;;u, home=\E[H,
+ hpa=\E[%?%p1%t%p1%{1}%+%d%;G, ht=\t, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, kbs=\b, kcub1=\ED\r, kcud1=\EB\r,
+ kcuf1=\EC\r, kcuu1=\EA\r, kf0=\E@\r, kf1=\EP\r,
+ kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, kf5=\EU\r, kf6=\EV\r,
+ kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, khome=\ER\r,
+ lf0=REFRSH, lf1=DEL\sCH, lf2=TABSET, lf3=GOTO,
+ lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
+ lf9=RIGHT, rev=\E[6\sD, ri=\E[T, rin=\E[%p1%dT,
+ rmso=\E[2\sD, rmul=\E[2\sD,
+ sgr=\E[%?%p5%t%{0}%e%{2}%;%?%p1%p3%|%p6%|%t%{4}%e%{0}%;%|%?%p4%t%{8}%e%{0}%;%|%?%p2%p6%|%t%{16}%e%{0}%;%|%d\sD,
+ sgr0=\E[2\sD, smso=\E[6\sD, smul=\E[18\sD,
+# ncr: NCR
+#
+# The 7900 model 1 is the default 7900 type terminal, so ``7900'' refers to it.
+# 7900 is not used by other terminals, so there is no name clash.
+ncr7900i|7900i|ncr7900|7900|ncr 7900 model 1,
+ am, bel=^G, bw, clear=^L, cols#80, cr=^M,
+ cub1=^H, cud1=^J, cuf1=^F, cuu1=^Z,
+ ind=^J, ll=^A,
+ cup=\E1%p2%c%p1%c,
+ ed=\Ek, el=\EK,
+ kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^Z, khome=^A,
+ is2=\E0@\E3\E4, lines#24,
+ rmso=\E0@, xmc#1, smso=\E0Q,
+ blink=\E0B, dim=\E0A, rev=\E0P,
+ smul=\E0`, rmul=\E0@, ul, sgr0=\E0@,
+# Since each attribute paramter is 0 or 1, we shift each attribute (standout,
+# reverse, blink, dim, and underline) the appropriate number of bits (by
+# multiplying the 0 or 1 by a coorect factor to shift) so the bias character,
+# '@' is (effectively) "or"ed with each attribute to generate the proper third
+# character in the <ESC>0 sequence. The "sgr" string implements the following
+# equation:
+#
+# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
+# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
+#
+# Where: P1 <==> Standout attribute parameter
+# P2 <==> Underline attribute parameter
+# P3 <==> Reverse attribute parameter
+# P4 <==> Blink attribute parameter
+# P5 <==> Dim attribute parameter
+ sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
+ mc4=^T, mc5=^R,
+# It seem users have a couple odd problems with ``vi'' when we define arrows,
+# since the arrow character has an otherwise special meaning to ``vi''.
+7900i-na|ncr7900i-na|ncr7900-na|7900-na|ncr 7900 model 1 with no arrows,
+ kcud1@, kcub1@, kcuf1@, kcuu1@, use=ncr7900i,
+# The entry for the model 4 is mostly untested. People seem to prefer
+# other models. This is a pretty outdated model.
+7900iv|ncr7900iv|ncr 7900 model 4,
+ am, bw, hs, eslok,
+ cols#80, lines#24,
+ bel=^G, cr=\r, clear=\f,
+ cup=^K%p1%'@'%+%c\E^E%p2%02d, cud1=\n, home=^K@\E^E00,
+ cub1=\b, dl1=\E^O, dsl=\Ey1,
+ fsl=\Ek\Ey5, il1=\E^N, kbs=\b,
+ kcud1=\EB, kf1=\ES, kf2=\ET,
+ kf3=\EU, kf4=\EV, kf5=\EW,
+ kf6=\EP, kf7=\EQ, kf8=\ER,
+ khome=\EH, kcub1=\ED, kcuf1=\EC,
+ kcuu1=\EA, lf6=blue, lf7=red,
+ lf8=white, nel=\r\n, ind=\n,
+ tsl=\Ej\Ex5\Ex1\EY8%p1%' '%+%c\Eo,
+ ind=^J,
+# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
+# The user can enter a CTRL-B to get out of this locked state.
+ncr7901|7901|ncr 7901 model,
+ cols#80, lines#24,
+ am, bel=^G, bw, clear=^L, cr=^M,
+ cub1=^H, cud1=^J, cuf1=^F, cuu1=^Z,
+ ind=^J, ll=^A,
+ ed=\Ek, el=\EK,
+ civis=^W, cnorm=^X,
+ mc4=^T, mc5=^R,
+ kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^Z, kclr=^L, khome=^A,
+ is2=^X,
+ .is2=\E4^O^X,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c,
+ vpa=^K%p1%'@'%+%c,
+# We want to output the character given by the formula:
+# ((col / 10) * 16) + (col % 10) where "col" is "p1"
+ hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
+ sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c^N,
+ blink=\E0B, dim=\E0A, rev=\E0P,
+ smso=\E0Q^N, rmso=^O, .msgr,
+ smul=\E0`^N, rmul=^O, sgr0=^O, ul,
+#
+#
+#
+t88|Synco T88 terminal,
+ am, xon,
+ cols#80, lines#24, xmc#0,
+ bel=^G, clear=^Z, cr=\r, cub1=\b, cud1=\n, cuf1=\f,
+ cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER$<1*>, el=\ET, home=^^, ht=\t, ich1=\EQ,
+ if=/usr/share/lib/tabset/stdcrt, il1=\EE$<1*>, ind=\n,
+ kbs=\b, kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K,
+ kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
+ kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
+ rmso=\E(, rmul=\Em, smso=\E), smul=\El,
+#
+#
+t88-nr|Synco T88 terminal without rev video,
+ am, xon,
+ cols#80, lines#24,
+ bel=^G, clear=^Z, cr=\r, cub1=\b, cud1=\n, cuf1=\f,
+ cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER$<1*>, el=\ET, home=^^, ht=\t, ich1=\EQ,
+ if=/usr/share/lib/tabset/stdcrt, il1=\EE$<1*>, ind=\n,
+ kbs=\b, kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K,
+ kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
+ kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
+ rmul=\Em, smul=\El,
+i279|Intel SBX279,
+ cols#80, lines#25,
+#### acsc=''aaffggj\343k\341l\340m\342n\352q\350t\346u\345v\347w\344x\351,
+ bel=^G, clear=\E+, cr=\r, cub1=\b, cud1=\n, cuf1=\f,
+ cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, dl1=\ER,
+ ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Er\E+,
+ kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K, kdl1=\ER,
+ khome=^^, kil1=\EE,
+ smso=\Ej, rmso=\Ek,
+ sgr0=\Ek$<2>,