--- a/usr/src/cmd/terminfo/beehive.ti Tue Aug 30 09:23:32 2011 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,136 +0,0 @@
-#
-# CDDL HEADER START
-#
-# The contents of this file are subject to the terms of the
-# Common Development and Distribution License, Version 1.0 only
-# (the "License"). You may not use this file except in compliance
-# with the License.
-#
-# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
-# or http://www.opensolaris.org/os/licensing.
-# See the License for the specific language governing permissions
-# and limitations under the License.
-#
-# When distributing Covered Code, include this CDDL HEADER in each
-# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
-# If applicable, add the following below this CDDL HEADER, with the
-# fields enclosed by brackets "[]" replaced with your own identifying
-# information: Portions Copyright [yyyy] [name of copyright owner]
-#
-# CDDL HEADER END
-#
-# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
-# All Rights Reserved
-
-
-#ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.10 */
-# # --------------------------------
-#
-# beehive: BEEHIVE
-#
-# Manufacturer: BEEHIVE
-# Class: II
-#
-# Info:
-# Beehive documentation is undated
-# (Preliminary) and has no figures so we must have early Superbee2
-# (Model 600, according to phone conversation with mfr.). It has
-# proved reliable except for some missing padding requirements
-# (notably after \EK and nl at bottom of screen).
-#
-# The key idea is that AEP mode is poison for cm & that US's in
-# the local memory should be avoided like the plague. That means
-# that the 2048 character local buffer is used as 25 lines of 80
-# characters, period. No scrolling local memory, folks. It also
-# appears that we cannot use naked INS LINE feature since it uses
-# US. The sbi fakes al with an 80-space insert that may be too
-# slow at low speeds; also spaces get converted to \040 which is
-# too long for some programs (not vi). DEL LINE is ok but slow.
-#
-# The nl string is designed for last line of screen ONLY; cm to
-# 25th line corrects the motion inherent in scrolling to Page 1.
-#
-# There is one understood bug. It is that the screen appears to
-# pop to a new (blank) page after a nl, or leave a half-line
-# elipsis to a quad that is the extra 48 memory locations. The
-# data received is dumped into memory but not displayed. Not to
-# worry if cm is being used; the lines not displayed will be,
-# whenever the cursor is moved up there. Since cm is addressed
-# relative to MEMORY of window, nothing is lost; but beware of
-# relative cursor motion (up,do,nd,bs). Recommended, therefore,
-# is setenv MORE -c .
-#
-# WARNING: Not all features tested.
-#
-# Timings are assembled from 3 sources. Some timings may reflect
-# SB2/Model 300 that were used if more conservative.
-# Tested on a Model 600 at 1200 and 9600 bd.
-#
-# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
-# placed on the keyboard and useless because of AEP, is made
-# into a backspace key. In use ESC must be pressed twice (to send)
-# and sending ^C must be prefixed by ESC to avoid that wierd
-# transmit mode associated with ENTER key.
-#
-# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
-# the screen, then it has dropped into ENTER mode; hit
-# RESET--ONLINE--!tset.
-#
-# As delivered this machine has a FATAL feature that will throw
-# it into that strange transmit state (SPOW) if the space bar is
-# hit after a CR is received, but before receiving a LF (or a
-# few others).
-#
-# The circuits MUST be modified to eliminate the SPOW latch.
-# This is done by strapping on chip A46 of the I/O board; cut
-# the p.c. connection to Pin 5 and Strap Pin 5 to Pin 8 of that
-# chip. This mod has been checked out on a Mod 600 of Superbee II.
-# With this modification absurdly high timings on cr are
-# unnecessary.
-#
-# NOTE WELL that the rear panel switch should be set to CR/LF,
-# not AEP!
-#
-sb|sb1|sbg|Beehive superbee,
- cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, cbt=\E`$<650>, bw, cols#80,
- il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
- ed=\EJ$<3>, el=\EK$<3>, clear=\EH$<1>\EJ$<3>, cup=\EF%p2%03d%p1%03d,
- ht=\t, hts=\E1, tbc=\E3, lines#25, cub1=\b$<1>, cr=$<1>\r, da,
- db, dch1=\EP$<3>, dl1=\EM$<100>, cud1=\EB$<3>, rmir=\ER,
- home=\EH$<1>, smir=\EQ\EO,
- is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kf0=\E2, kf1=\Ep,
- kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- kf9=\E1, lf0=TAB CLEAR, lf9=TAB SET,
- kbs=^_, kcud1=\EB,
- kel=\EK, ked=\EJ, kdl1=\EM, kich1=\EQ\EO, krmir=\ER,
- khome=\EH, kcub1=\ED, kcuf1=\EC, kcuu1=\EA, mir,
- cuf1=\EC$<3>, rmso=\E_3, xmc#1, smso=\E_1,
- smcup=\EO, rmul=\E_3, ul, cuu1=\EA$<3>,
- smul=\E_0,
-sb2|sb3|fixed superbee,
- xsb@, use=superbee,
-sbi|superbee|beehive superbee at Indiana U.,
- xsb, cr=^M$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, use=sbg,
-# Info:
-# Does this entry make xmc when it doesn't have to?
-# Look at those spaces in rmso/smso. Seems strange to me.
-# However, not having one to test changes on, I'll just leave it be...
-#
-bh3m|beehiveIIIm|,
- if=/usr/share/lib/tabset/beehive,
- cr=^M, cud1=^J, ind=^J, bel=^G,
- il1=^S$<160>, am, cub1=^H, ed=^R, el=^P, clear=^E^R,
- cols#80, dl1=^Q$<350>, home=^E, lines#20, ll=^E^K,
- cuf1=^L, ht=^I, rmso= ^_, smso=^] , cuu1=^K,
-microb|microbee|micro bee series,
- cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
- ed=\EJ, el=\EK, clear=\EE, cols#80, cup=\EF%p1%' '%+%c%p2%' '%+%c,
- kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
- kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex,
- kcud1=\EB, khome=\EH, kcub1=\ED, kcuf1=\EC, kcuu1=\EA,
- lines#24, cuf1=\EC, ht=^I, cuu1=\EA,
- rmso=\Ed@ , smso= \EdP, rmul=\Ed@, smul=\Ed`,
-bh4|beehive4|beehive 4,
- cr=^M, cud1=^J, ind=^J, bel=^G,
- cols#80, lines#24, am, cub1=^H, ed=\EJ, el=\EK, clear=\EE,
- home=\EH, cuu1=\EA, cuf1=\EC, cub1=\ED,