--- a/usr/src/cmd/terminfo/hazeltine.ti Tue Aug 30 09:23:32 2011 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,161 +0,0 @@
-#
-# CDDL HEADER START
-#
-# The contents of this file are subject to the terms of the
-# Common Development and Distribution License, Version 1.0 only
-# (the "License"). You may not use this file except in compliance
-# with the License.
-#
-# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
-# or http://www.opensolaris.org/os/licensing.
-# See the License for the specific language governing permissions
-# and limitations under the License.
-#
-# When distributing Covered Code, include this CDDL HEADER in each
-# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
-# If applicable, add the following below this CDDL HEADER, with the
-# fields enclosed by brackets "[]" replaced with your own identifying
-# information: Portions Copyright [yyyy] [name of copyright owner]
-#
-# CDDL HEADER END
-#
-# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
-# All Rights Reserved
-
-
-#ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.6 */
-# # --------------------------------
-#
-# hazeltine: HAZELTINE
-#
-# Manufacturer: HAZELTINE
-# Class: II
-#
-# Info:
-# Since cuf1 is blank, when you want to erase something you
-# are out of luck. You will have to do ^L's a lot to
-# redraw the screen. h1000 is untested. It doesn't work in
-# vi - (The code is there but it isn't debugged for this case.)
-#
-h1000|hazeltine 1000,
- cub1=^H, home=^K, clear=^L, cuf1= ,
- cols#80, lines#12, cr=^M, cud1=^J, ind=^J, bel=^G,
-h1420|hazeltine 1420,
- cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, am, lines#24, cols#80,
- il1=\E^Z, dl1=\E^S, ed=\E^X, clear=\E\034, cuu1=\E^L, cuf1=^P,
- el=\E^O, ht=^N, cup=\E^Q%p2%c%p1%' '%+%c, smso=\E\037, rmso=\E^Y,
-h1500|hazeltine 1500,
- cr=^M, cud1=^J, ind=^J, bel=^G, il1=~^Z$<40>, hz, am,
- cub1=^H, ed=~^X$<10>,
- el=~^O, clear=~^\, cup=~^Q%p2%c%p1%c, cols#80, dl1=~^S$<40>,
- cud1=~^K, lines#24, cuf1=^P, smso=~^_, rmso=~^Y, cuu1=~^L,
-# Info:
-# This is a Fluke special to work around the comm gear
-# intercepting ^S
-#
-s1500|hazeltine 1500 thru comm system that see's ^S ,
- cr=^M, ind=^J, cud1=^J, bel=^G,
- il1=~^Z$<40>, am, cub1=^H, ed=~^X$<10>, el=~^O,
- clear=~^\, cup=~^Q%p2%c%p1%c, cols#80,
- cud1=~^K, hz, lines#24, cuf1=^P, cuu1=~^L,
-# Info:
-# h1510 assumed to be in escape mode. Else use h1510t.
-#
-h1510|hazeltine 1510 using escape escapes,
- cr=^M, cud1=^J, ind=^J, bel=^G,
- il1=\E^Z, am, cub1=^H, ed=\E^X, el=\E^O, clear=\E^\,
- cup=\E^Q%p2%c%p1%c, cols#80, dl1=\E^S, cud1=\E^K,
- lines#24, cuf1=^P, .rmso=\E^_, .smso=\E^Y, cuu1=\E^L,
-h1510t|Hazeltine 1510 with tilde escapes,
- am,
- home=~^R,
- khome=~^R,
- cuu1=~^L,
- kcuu1=~^L,
- cud1=~^K,
- kcud1=~^K,
- cub1=\b,
- bel=^G,
- cbt=~,
- clear=~,
- cols#80,
- cr=
,
- cuf1=^P,
- cup=~^Q%p2%c%p1%c,
- dl1=~^S$<40>,
- ed=~^X$<10>,
- el=~^O,
- hz,
- il1=~^Z$<40>,
- ind=^J,
- kbs=,
- kcbt=~,
- kclr=~,
- kcub1=\b,
- kcuf1=^P,
- kf0=~0\r,
- kf1=~1\r,
- kf2=~2\r,
- kf3=~3\r,
- kf4=~4\r,
- kf5=~5\r,
- kf6=~6\r,
- kf7=~7\r,
- kf8=~8\r,
- kf9=~9\r,
- ktbc=~.\r,
- lines#24,
- rmso=~^Y,
- sc=~^E,
- smso=~^_,
-
-
-h1520|hazeltine 1520,
- cr=^M, cud1=^J, ind=^J, bel=^G, il1=~^Z, am, cub1=^H,
- ed=~^X, el=~^O, clear=~\034, cup=~^Q%p2%c%p1%c$<1>, cols#80,
- dl1=~^S, cud1=~^K, hz, lines#24, cuf1=^P,
- rmso=~^Y, smso=~\037, cuu1=~^L, home=~^R,
-# Info:
-# The h1552 has tildes and backprimes and everything!
-# Be sure the auto lf/cr switch is set to cr.
-#
-h1552|hazeltine 1552,
- cols#80, it#8, lines#24,
- bel=^G, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\n,
- cuf1=\EC, cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA,
- dl1=\EO, ed=\EJ, el=\EK, ht=\t, il1=\EE, ind=\n,
- kbs=\b, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, lf2=red,
- lf3=green, ri=\EI,
-h1552-rv|hazeltine 1552 reverse video,
- cr=^M, cud1=^J, ind=^J, bel=^G,
- smso=\ES, rmso=\ET, use=h1552,
-# Info:
-# h2000 won't work well because of a clash between upper case
-# and ~'s.
-#
-h2000|hazeltine 2000,
- cud1=^J, ind=^J, bel=^G,
- il1=~^z$<6>, am, cub1=^H, clear=~^\$<6>, cup=~^q%p2%c%p1%c, cols#74,
- dl1=~^s$<6>, home=~^r, lines#27, pad=\177,
-# Info:
-# Date: Fri Jul 23 10:27:53 1982
-# I tested this termcap entry for the Hazeltine Esprit with vi. It
-# seems to work ok. There is one problem though if one types a
-# lot of garbage characters very fast vi seems not able to keep
-# up and hangs while trying to insert. That's in insert mode
-# while trying to insert in the middle of a line. It might be
-# because the Esprit doesn't have insert char and delete char as
-# a built in function. Vi has to delete to end of line and then
-# redraw the rest of the line.
-#
-esprit|Hazeltine Esprit I,
- cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E^Z, am, cub1=^H,
- cbt=\E^T, bw, ed=\E^W, el=\E^O, clear=\E\034, cup=\E^Q%p2%c%p1%c,
- cols#80, dl1=\E^S, cud1=\E^K, home=\E^R, is2=\E\077,
- kf0=^B\060\n, kf1=^B\061\n, kf2=^B\062\n, kf3=^B\063\n,
- kf4=^B\064\n, kf5=^B\065\n, kf6=^B\066\n, kf7=^B\067\n,
- kf8=^B\070\n, kf9=^B\071\n, kbs=^H, kcud1=\E^K, rmkx=\E\076,
- khome=\E^R, kcub1=^H, kcuf1=^P, smkx=\E\074, kcuu1=\E^L, lf0=0,
- lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
- lines#24, cuf1=^P, rmso=\E^Y, smso=\E^_, cuu1=\E^L,