--- a/usr/src/cmd/terminfo/heath.ti Tue Aug 30 09:23:32 2011 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,126 +0,0 @@
-#
-# CDDL HEADER START
-#
-# The contents of this file are subject to the terms of the
-# Common Development and Distribution License, Version 1.0 only
-# (the "License"). You may not use this file except in compliance
-# with the License.
-#
-# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
-# or http://www.opensolaris.org/os/licensing.
-# See the License for the specific language governing permissions
-# and limitations under the License.
-#
-# When distributing Covered Code, include this CDDL HEADER in each
-# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
-# If applicable, add the following below this CDDL HEADER, with the
-# fields enclosed by brackets "[]" replaced with your own identifying
-# information: Portions Copyright [yyyy] [name of copyright owner]
-#
-# CDDL HEADER END
-#
-# Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
-# All Rights Reserved
-
-
-#ident "%Z%%M% %I% %E% SMI" /* SVr4.0 1.6 */
-# # --------------------------------
-#
-# heath: HEATHKIT and ZENITH
-#
-# Manufacturer: HEATHKIT and ZENITH
-# Class: I
-h19-a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
- cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E[1L$<1*>, am, cub1=^H, ed=\E[J,
- el=\E[K, clear=\E[2J, cup=\E[%i%p1%d;%p2%dH, cols#80,
- dch1=\E[1P, dl1=\E[1M$<1*>, cud1=\E[1B,
- rmir=\E[4l, home=\E[H, smir=\E[4h, lines#24, mir,
- cuf1=\E[1C, smacs=\E[10m, rmacs=\E[11m, msgr, ht=^I, it#8,
- rmso=\E[0m, smso=\E[7m, cuu1=\E[1A, cvvis=\E[>4h, cnorm=\E[>4l,
- kbs=^h, kcuu1=\E[1A, kcud1=\E[1B, kcub1=\E[1D, kcuf1=\E[1C,
- khome=\E[H,
- kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, lf6=blue,
- lf7=red, lf8=white, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
- ri=\EM, is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[0m\E[11m\E[?7h,
-h19-bs|heathkit w/keypad shifted,
- smkx=\Et, rmkx=\Eu, use=h19-b,
-h19-smul|heathkit w/keypad shifted/underscore cursor,
- smkx=\Et, rmkx=\Eu, use=h19-u,
-h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
- cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL$<1*>, am, cub1=^H,
- ed=\EJ, el=\EK, clear=\EE, cup=\EY%p1%' '%+%c%p2%' '%+%c, cols#80,
- dch1=\EN, dl1=\EM$<1*>, cud1=\EB, rmir=\EO, home=\EH, smir=\E@,
- lines#24, mir, cuf1=\EC, smacs=\EF, rmacs=\EG, msgr, ht=^I, it#8,
- ri=\EI, rmso=\Eq, smso=\Ep, cuu1=\EA, cvvis=\Ex4, cnorm=\Ey4,
- kbs=^h, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH,
- kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
- lf6=blue, lf7=red, lf8=white, kf6=\EP, kf7=\EQ, kf8=\ER,
- hs, eslok, tsl=\Ej\Ex5\EY8%p1%' '%+%c\Eo\Eo, fsl=\Ek\Ey5,
-h19-u|heathkit with underscore cursor,
- cvvis@, cnorm@, use=h19-b,
-# Info:
-# This still doesn't work right - something funny is going on
-# with return # and linefeed in the reach program. Apparently
-# cr acts like crlf and lf is ignored. There is a "literal end
-# of line mode" which works right, but this will cause cr's to
-# appear in files that are spooled. This description assumes
-# "normal end of line mode".
-#
-reach|h89|h89 running reach,
- cr@, cud1=\EB, ind=\r\l, is2=\Ey3\Ev, use=h19-b,
-alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
- lines#60, il1=\EL, dl1=\EM, use=h19,
-# Info:
-# The major problem with the Z29 is that it requires more
-# padding than the Z19. Once again, here's a little termcap
-# entry for it that will do the trick.
-#
-# The problem declaring an H19 to be synonomous with a Z29 is that
-# it needs more padding. It especially loses if a program attempts
-# to put the Z29 into insert mode and insert text at 9600 baud. It
-# even loses worse if the program attempts to insert tabs at 9600
-# baud. Adding padding to text that is inserted loses because in
-# order to make the Z29 not die, one must add so much padding that
-# whenever the program tries to use insert mode, the effective
-# rate is about 110 baud.
-#
-# What program would want to put the terminal into insert mode
-# and shove stuff at it at 9600 baud you ask?
-#
-# Emacs. Emacs seems to want to do the mathematically optimal
-# thing in doing a redisplay rather than the practical thing.
-# When it is about to output a line on top of a line that is
-# already on the screen, instead of just killing to the end of
-# the line and outputing the new line, it compares the old line
-# and the new line and if there are any similarities, it
-# constructs the new line by deleting the text on the old line
-# on the terminal that is already there and then inserting new
-# text into the line to transform it into the new line that is
-# to be displayed. The Z29 does not act kindly to this.
-#
-# But don't cry for too long.... There is a solution. You can make
-# a termcap entry for the Z29 that says the Z29 has no insert mode.
-# Then Emacs cannot use it. "Oh, no, but now inserting into a
-# line will be really slow", you say. Well there is a sort of a
-# solution to that too. There is an insert character option on
-# the Z29 that will insert one character. Unfortunately, it
-# involves putting the terminal into ansi mode, inserting the
-# character, and changing it back to H19 mode. All this takes 12
-# characters. Pretty expensive to insert one character, but it
-# works. Either Emacs doesn't try to use its inserting hack when
-# it's only given an insert character ability or the Z29 doesn't
-# require padding with this (the former is probably more likely,
-# but I haven't checked it out).
-#
-z29|zenith29|z29b|,
- cr=^M, cud1=^J, ind=^J, bel=^G, is2=\E<\E[?2h\Ev, il1=\EL$<1>, am,
- cub1=^H, ed=\EJ$<14>, el=\EK$<1>, clear=\EE$<14>,
- cup=\EY%p1%' '%+%c%p2%' '%+%c,
- cols#80, dch1=\EN$<0.1*>, dl1=\EM$<1>, cud1=\EB, home=\EH,
- ich1=\E<\E[1@\E[?2h$<1>, lines#24, cuf1=\EC,
- rmacs=\EF, smacs=\EG, ind=\n$<2>, msgr, ht=^I, ri=\EI$<2>, rmso=\Eq,
- smso=\Ep, cuu1=\E$<1>A, cvvis=\Ex4, cnorm=\Ey4, kbs=^h, kcuu1=\EA,
- kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\EH, kf1=\ES,
- kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
- kf9=\E0I, kf0=\E~, lf0=home,
- cbt=\E-, smul=\Es8, rmul=\Es0,