--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/usr/src/cmd/terminfo/termcap.src Tue Aug 30 15:16:15 2011 -0700
@@ -0,0 +1,20360 @@
+######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
+#
+# This version of terminfo.src is distributed with ncurses and is maintained
+# by Thomas E. Dickey (TD).
+#
+# Report bugs and new terminal descriptions to
+# [email protected]
+#
+# $Revision: 1.162 $
+# $Date: 2011/08/20 20:52:51 $
+#
+# The original header is preserved below for reference. It is noted that there
+# is a "newer" version which differs in some cosmetic details (but actually
+# stopped updates several years ago); we have decided to not change the header
+# unless there is also a change in content.
+#
+# To further muddy the waters, it is noted that changes to this file as part of
+# maintenance of ncurses (since 1996) are generally conceded to be copyright
+# under the ncurses MIT-style license. That was the effect of the agreement
+# which the principal authors of ncurses made in 1998. However, since much of
+# the file itself is of unknown authorship (and the disclaimer below makes it
+# obvious that Raymond cannot or will not convey rights over those parts),
+# there is no explicit copyright notice on the file itself.
+#
+# It would also be a nuisance to split the file into unknown/known authorship
+# and move pieces as they are maintained, since many of the maintenance changes
+# have been small corrections to Raymond's translations to/from termcap format,
+# correcting the data but not the accompanying annotations.
+#
+# In any case, note that almost half of this file is not data but annotations
+# which reflect creative effort. Furthermore, the structure of entries to
+# reuse common chunks also is creative (and subject to copyright). Finally,
+# some portions of the data are derivative work under a compatible MIT-style
+# license from xterm.
+#
+#------------------------------------------------------------------------------
+# Version 10.2.1
+# terminfo syntax
+#
+# Eric S. Raymond (current maintainer)
+# John Kunze, Berkeley
+# Craig Leres, Berkeley
+#
+# Please e-mail changes to [email protected]; the old [email protected]
+# address is no longer valid. The latest version can always be found at
+# <http://www.tuxedo.org/terminfo>.
+#
+# PURPOSE OF THIS FILE:
+#
+# This file describes the capabilities of various character-cell terminals,
+# as needed by software such as screen-oriented editors.
+#
+# Other terminfo and termcap files exist, supported by various OS vendors
+# or as relics of various older versions of UNIX. This one is the longest
+# and most comprehensive one in existence. It subsumes not only the entirety
+# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
+# termcap file, but also large numbers of vendor-maintained termcap and
+# terminfo entries more complete and carefully tested than those in historical
+# termcap/terminfo versions.
+#
+# Pointers to related resources (including the ncurses distribution) may
+# be found at <http://www.tuxedo.org/terminfo>.
+#
+# INTERNATIONALIZATION:
+#
+# This file uses only the US-ASCII character set (no ISO8859 characters).
+#
+# This file assumes a US-ASCII character set. If you need to fix this, start
+# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
+# for your character set. \E(A and \E)A enables the British character set
+# with the pound sign at position 2/3.
+#
+# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
+# C1 characters are considered the first-byte set of the Japanese encodings,
+# so \E)0 should be avoided in <enacs> and initialization strings.
+#
+# FILE FORMAT:
+#
+# The version you are looking at may be in any of three formats: master
+# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
+# which by the format given in the header above.
+#
+# The master format is accepted and generated by the terminfo tools in the
+# ncurses suite; it differs from stock (System V-compatible) terminfo only
+# in that it admits a group of capabilities (prefixed `OT') equivalent to
+# various obsolete termcap capabilities. You can, thus, convert from master
+# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
+# you have ncurses `tic -I' is nicer (among other things, it automatically
+# outputs entries in a canonical form).
+#
+# The termcap version is generated automatically from the master version
+# using tic -C. This filtering leaves in the OT capabilities under their
+# original termcap names. All translated entries fit within the 1023-byte
+# string-table limit of archaic termcap libraries except where explicitly
+# noted below. Note that the termcap translation assumes that your termcap
+# library can handle multiple tc capabilities in an entry. 4.4BSD has this
+# capability. Older versions of GNU termcap, through 1.3, do not.
+#
+# For details on these formats, see terminfo(5) in the ncurses distribution,
+# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
+# curses has been declared obsolete by the caretakers of the 4.4BSD sources
+# as of June 1995; they are encouraging everyone to migrate to ncurses.
+#
+# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
+# no entry in this file has embedded comments. This is so source translation
+# to termcap only has to carry over leading comments. Also, no name field
+# contains embedded whitespace (such whitespace confuses rdist).
+#
+# Further note: older versions of this file were often installed with an editor
+# script (reorder) that moved the most common terminal types to the front of
+# the file. This should no longer be necessary, as the file is now ordered
+# roughly by type frequency with ANSI/VT100 and other common types up front.
+#
+# Some information has been merged in from terminfo files distributed by
+# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
+# comes from vendors who maintain official terminfos for their hardware
+# (notably DEC and Wyse).
+#
+# A detailed change history is included at the end of this file.
+#
+# FILE ORGANIZATION:
+#
+# Comments in this file begin with # - they cannot appear in the middle
+# of a terminfo/termcap entry (this feature had to be sacrificed in order
+# to allow standard terminfo and termcap syntax to be generated cleanly from
+# the master format). Individual capabilities are commented out by
+# placing a period between the colon and the capability name.
+#
+# The file is divided up into major sections (headed by lines beginning with
+# the string "########") and minor sections (beginning with "####"); do
+#
+# grep "^####" <file> | more
+#
+# to see a listing of section headings. The intent of the divisions is
+# (a) to make it easier to find things, and (b) to order the database so
+# that important and frequently-encountered terminal types are near the
+# front (so that you'll get reasonable search efficiency from a linear
+# search of the termcap form even if you don't use reorder). Minor sections
+# usually correspond to manufacturers or standard terminal classes.
+# Parenthesized words following manufacturer names are type prefixes or
+# product line names used by that manufacturers.
+#
+# HOW TO READ THE ENTRIES:
+#
+# The first name in an entry is the canonical name for the model or
+# type, last entry is a verbose description. Others are mnemonic synonyms for
+# the terminal.
+#
+# Terminal names look like <manufacturer> <model> - <modes/options>
+# The part to the left of the dash, if a dash is present, describes the
+# particular hardware of the terminal. The part to the right may be used
+# for flags indicating special ROMs, extra memory, particular terminal modes,
+# or user preferences.
+#
+# All names should be in lower case, for consistency in typing.
+#
+# The following are conventionally used suffixes:
+# -2p Has two pages of memory. Likewise 4p, 8p, etc.
+# -am Enable auto-margin.
+# -m Monochrome. Suppress color support
+# -mc Magic-cookie. Some terminals (notably older Wyses) can
+# only support one attribute without magic-cookie lossage.
+# Their base entry is usually paired with another that
+# uses magic cookies to support multiple attributes.
+# -nam No auto-margin - suppress :am: capability
+# -nl No labels - suppress soft labels
+# -ns No status line - suppress status line
+# -rv Terminal in reverse video mode (black on white)
+# -s Enable status line.
+# -vb Use visible bell (:vb:) rather than :bl:.
+# -w Wide - in 132 column mode.
+# If a name has multiple suffixes and one is a line height, that one should
+# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
+#
+# Entries with embedded plus signs are designed to be included through use/tc
+# capabilities, not used as standalone entries.
+#
+# To avoid search clashes, some older all-numeric names for terminals have
+# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
+# All primary names of terminals now have alphanumeric prefixes.
+#
+# Comments marked "esr" are mostly results of applying the termcap-compiler
+# code packaged with ncurses and contemplating the resulting error messages.
+# In many cases, these indicated obvious fixes to syntax garbled by the
+# composers. In a few cases, I was able to deduce corrected forms for garbled
+# capabilities by looking at context. All the information in the original
+# entries is preserved in the comments.
+#
+# In the comments, terminfo capability names are bracketed with <> (angle
+# brackets). Termcap capability names are bracketed with :: (colons).
+#
+# INTERPRETATION OF USER CAPABILITIES
+#
+# The System V Release 4 and XPG4 terminfo format defines ten string
+# capabilities for use by applications, <u0>...<u9>. In this file, we use
+# certain of these capabilities to describe functions which are not covered
+# by terminfo. The mapping is as follows:
+#
+# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
+# u8 terminal answerback description
+# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
+# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
+#
+# The terminal enquire string <u9> should elicit an answerback response
+# from the terminal. Common values for <u9> will be ^E (on older ASCII
+# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
+#
+# The cursor position request (<u7>) string should elicit a cursor position
+# report. A typical value (for VT100 terminals) is \E[6n.
+#
+# The terminal answerback description (u8) must consist of an expected
+# answerback string. The string may contain the following scanf(3)-like
+# escapes:
+#
+# %c Accept any character
+# %[...] Accept any number of characters in the given set
+#
+# The cursor position report (<u6>) string must contain two scanf(3)-style
+# %d format elements. The first of these must correspond to the Y coordinate
+# and the second to the %d. If the string contains the sequence %i, it is
+# taken as an instruction to decrement each value after reading it (this is
+# the inverse sense from the cup string). The typical CPR value is
+# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
+#
+# These capabilities are used by tack(1m), the terminfo action checker
+# (distributed with ncurses 5.0).
+#
+# TABSET FILES
+#
+# All the entries in this file have been edited to assume that the tabset
+# files directory is /usr/share/tabset, in conformance with the File Hierarchy
+# Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
+# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
+#
+# No curses package we know of actually uses these files. If their location
+# is an issue, you will have to hand-patch the file locations before compiling
+# this file.
+#
+# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
+#
+# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
+# character-cell terminals are increasingly replaced by X displays, much of
+# this file is becoming a historical document (this is part of the reason for
+# the new organization, which puts ANSI types, xterm, Unix consoles,
+# and vt100 up front in confidence that this will catch 95% of new hardware).
+#
+# For the terminal types still alive, I'd like to have manufacturer's
+# contact data (Internet address and/or snail-mail + phone).
+#
+# I'm also interested in enriching the comments so that the latter portions of
+# the file do in fact become a potted history of VDT technology as seen by
+# UNIX hackers. Ideally, I'd like the headers for each manufacturer to
+# include its live/dead/out-of-the-business status, and for as many
+# terminal types as possible to be tagged with information like years
+# of heaviest use, popularity, and interesting features.
+#
+# I'm especially interested in identifying the obscure entries listed under
+# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
+# wisdom about them gets lost. If you know a lot about obscure old terminals,
+# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
+# eyeball it for things you can identify and describe.
+#
+# If you have been around long enough to contribute, please read the file
+# with this in mind and send me your annotations.
+#
+# COPYRIGHTS AND OTHER DELUSIONS
+#
+# The BSD ancestor of this file had a standard Regents of the University of
+# California copyright with dates from 1980 to 1993.
+#
+# Some information has been merged in from a terminfo file SCO distributes.
+# It has an obnoxious boilerplate copyright which I'm ignoring because they
+# took so much of the content from the ancestral BSD versions of this file
+# and didn't attribute it, thereby violating the BSD Regents' copyright.
+#
+# Not that anyone should care. However many valid functions copyrights may
+# serve, putting one on a termcap/terminfo file with hundreds of anonymous
+# contributors makes about as much sense as copyrighting a wall-full of
+# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
+#
+# This file deliberately has no copyright. It belongs to no one and everyone.
+# If you claim you own it, you will merely succeed in looking like a fool.
+# Use it as you like. Use it at your own risk. Copy and redistribute freely.
+# There are no guarantees anywhere. Svaha!
+#
+
+######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
+#
+# This section describes terminal classes and brands that are still
+# quite common.
+#
+
+#### Specials
+#
+# Special "terminals". These are used to label tty lines when you don't
+# know what kind of terminal is on it. The characteristics of an unknown
+# terminal are the lowest common denominator - they look about like a ti 700.
+#
+
+dumb|80-column dumb tty:\
+ :am:\
+ :co#80:\
+ :bl=^G:cr=^M:do=^J:sf=^J:
+unknown|unknown terminal type:\
+ :gn:tc=dumb:
+lpr|printer|line printer:\
+ :bs:hc:os:\
+ :co#132:li#66:\
+ :bl=^G:cr=^M:do=^J:ff=^L:le=^H:sf=^J:
+glasstty|classic glass tty interpreting ASCII control characters:\
+ :am:bs:\
+ :co#80:\
+ :bl=^G:cl=^L:cr=^M:do=^J:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I:
+
+vanilla|dumb tty:\
+ :bs:\
+ :bl=^G:cr=^M:do=^J:sf=^J:
+
+# This is almost the same as "dumb", but with no prespecified width.
+# DEL and ^C are hardcoded to act as kill characters.
+# ^D acts as a line break (just like newline).
+# It also interprets
+# \033];xxx\007
+# for compatibility with xterm -TD
+9term|Plan9 terminal emulator for X:\
+ :am:\
+ :bl=^G:do=^J:nl=^J:
+
+#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
+#
+# See the end-of-file comment for more on these.
+#
+
+# ANSI capabilities are broken up into pieces, so that a terminal
+# implementing some ANSI subset can use many of them.
+ansi+local1:\
+ :do=\E[B:le=\E[D:nd=\E[C:up=\E[A:
+ansi+local:\
+ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:tc=ansi+local1:
+ansi+tabs:\
+ :bt=\E[Z:ct=\E[3g:st=\EH:ta=^I:
+ansi+inittabs:\
+ :it#8:tc=ansi+tabs:
+ansi+erase:\
+ :cd=\E[J:ce=\E[K:cl=\E[H\E[J:
+ansi+rca:\
+ :ch=\E[%+^AG:cv=\E[%+^Ad:
+ansi+cup:\
+ :cm=\E[%i%d;%dH:ho=\E[H:
+ansi+rep:
+ansi+idl1:\
+ :al=\E[L:dl=\E[M:
+ansi+idl:\
+ :AL=\E[%dL:DL=\E[%dM:tc=ansi+idl1:
+ansi+idc:\
+ :IC=\E[%d@:dc=\E[P:ei=\E6:ic=\E[@:im=\E6:
+ansi+arrows:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
+ansi+sgr|ansi graphic renditions:\
+ :mb=\E[5m:me=\E[0m:mk=\E[8m:mr=\E[7m:
+ansi+sgrso|ansi standout only:\
+ :se=\E[m:so=\E[7m:
+ansi+sgrul|ansi underline only:\
+ :ue=\E[m:us=\E[4m:
+ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim:\
+ :md=\E[1m:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul:
+ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold:\
+ :mh=\E[2m:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul:
+ansi+pp|ansi printer port:\
+ :pf=\E[4i:po=\E[5i:ps=\E[0i:
+ansi+csr|ansi scroll-region plus cursor save & restore:\
+ :cs=\E[%i%d;%dr:rc=\E8:sc=\E7:
+
+# The IBM PC alternate character set. Plug this into any Intel console entry.
+# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
+# ROM graphics for control characters such as the diamond, up- and down-arrow.
+# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
+# will work with any Intel console, they all seem to have inherited \E[11m
+# from the ANSI.SYS de-facto standard.
+klone+acs|alternate character set for ansi.sys displays:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :ae=\E[10m:as=\E[11m:
+
+# Highlight controls corresponding to the ANSI.SYS standard. Most
+# console drivers for Intel boxes obey these. Makes the same assumption
+# about \E[11m as klone+acs. True ANSI/ECMA-48 would have :se=\E[27m:,
+# :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS.
+klone+sgr|attribute control for ansi.sys displays:\
+ :S2=\E[11m:S3=\E[10m:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:\
+ :se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:tc=klone+acs:
+
+# Most Intel boxes do not treat "invis" (invisible) text.
+klone+sgr8|attribute control for ansi.sys displays:\
+ :mk=\E[8m:tc=klone+sgr:
+
+# Highlight controls corresponding to the ANSI.SYS standard. *All*
+# console drivers for Intel boxes obey these. Does not assume \E[11m will
+# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
+# diamond and arrow characters under curses.
+klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m):\
+ :as=\E[12m:mb=\E[5m:md=\E[1m:me=\E[0m:mk=\E[8m:mr=\E[7m:\
+ :se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:tc=klone+acs:
+
+# KOI8-R (RFC1489) acs (alternate character set)
+# From: Qing Long <[email protected]>, 24 Feb 1996.
+klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset:\
+ :ac=+\020,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\200r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225:\
+ :ae=\E[10m:as=\E[11m:
+
+# ANSI.SYS color control. The setab/setaf caps depend on the coincidence
+# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
+# but equivalent strings that don't rely on that coincidence:
+# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
+# They match a subset of ECMA-48.
+klone+color|color control for ansi.sys and ISO6429-compatible displays:\
+ :Co#8:NC#3:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[37;40m:
+
+# This is better than klone+color, it doesn't assume white-on-black as the
+# default color pair, but many `ANSI' terminals don't grok the <op> cap.
+ecma+color|color control for ECMA-48-compatible terminals:\
+ :AX:\
+ :Co#8:NC#3:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[39;49m:
+
+# Attribute control for ECMA-48-compatible terminals
+ecma+sgr|attribute capabilities for true ECMA-48 terminals:\
+ :se=\E[27m:ue=\E[24m:tc=klone+sgr8:
+
+# For comparison, here are all the capabilities implied by the Intel
+# Binary Compatibility Standard (level 2) that fit within terminfo.
+# For more detail on this rather pathetic standard, see the comments
+# near the end of this file.
+ibcs2|Intel Binary Compatibility Standard prescriptions:\
+ :AL=\E[%dL:DC=\E[%dP:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
+ :RA=\E[?7l:RI=\E[%dC:S1=\E=%dg:SA=\E[?7h:SF=\E[%dS:\
+ :SR=\E[%dT:UP=\E[%dA:bt=\E[Z:ch=\E[%i%dG:cl=\Ec:\
+ :cm=\E[%i%d;%dH:ct=\E[g:cv=\E[%i%dd:do=\E[1B:ec=\E[%dX:\
+ :ei=:im=:le=\E[1D:nd=\E[1C:rc=\E7:sc=\E7:st=\EH:up=\E[1A:
+
+#### ANSI/ECMA-48 terminals and terminal emulators
+#
+# See near the end of this file for details on ANSI conformance.
+# Don't mess with these entries! Lots of other entries depend on them!
+#
+# This section lists entries in a least-capable to most-capable order.
+# if you're in doubt about what `ANSI' matches yours, try them in that
+# order and back off from the first that breaks.
+
+# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
+# and more than one page of memory. It uses local motions instead of
+# direct cursor addressing, and makes almost no assumptions. It does
+# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
+ansi-mr|mem rel cup ansi:\
+ :am:xo:\
+ :co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1:
+
+# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
+# beware of screen size problems and memory relative cursor addressing.
+ansi-mini|any ansi terminal with pessimistic assumptions:\
+ :am:xo:\
+ :co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase:
+
+# ansi-mtabs adds relative addressing and minimal tab support
+ansi-mtabs|any ansi terminal with pessimistic assumptions:\
+ :it#8:\
+ :ta=^I:tc=ansi+local1:tc=ansi-mini:
+
+# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
+#
+# The following is an entry for the full ANSI 3.64 (1977). It lacks
+# padding, but most terminals using the standard are "fast" enough
+# not to require any -- even at 9600 bps. If you encounter problems,
+# try including the padding specifications.
+#
+# Note: the :as: and :ae: specifications are not implemented here, for
+# the available termcap documentation does not make clear WHICH alternate
+# character set to specify. ANSI 3.64 seems to make allowances for several.
+# Please make the appropriate adjustments to fit your needs -- that is
+# if you will be using alternate character sets.
+#
+# There are very few terminals running the full ANSI 3.64 standard,
+# so I could only test this entry on one verified terminal (Visual 102).
+# I would appreciate the results on other terminals sent to me.
+#
+# Please report comments, changes, and problems to:
+#
+# U.S. MAIL: Hugh Hansard
+# Box: 22830
+# Emory University
+# Atlanta, GA. 30322.
+#
+# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
+#
+# (Added vt100 :rc:,:sc: to quiet a tic warning --esr)
+ansi77|ansi 3.64 standard 1977 version:\
+ :am:bs:mi:\
+ :co#80:it#8:li#24:\
+ :al=5*\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=5*\E[M:\
+ :do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOR:k4=\EOS:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
+ :sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+
+# Procomm and some other ANSI emulations don't recognize all of the ANSI-
+# standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and
+# <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:,
+# :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to
+# 5.03 doesn't recognize these. Finally, we delete :rp: and :sr:, which seem
+# to confuse many emulators. On the other hand, we can count on these programs
+# doing :ae:/:as:/:sa:. Older versions of this entry featured
+# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
+# ANSI.SYS influence.
+# From: Eric S. Raymond <[email protected]> Oct 30 1995
+pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode):\
+ :am:bs:mi:ms:\
+ :co#80:it#8:li#24:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ho=\E[H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=\E[D:nd=\E[C:sf=^J:st=\EH:ta=^I:up=\E[A:\
+ :tc=klone+sgr-dumb:
+pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode):\
+ :li#25:tc=pcansi-m:
+pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode):\
+ :li#33:tc=pcansi-m:
+pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode):\
+ :li#43:tc=pcansi-m:
+# The color versions. All PC emulators do color...
+pcansi|ibm-pc terminal programs claiming to be ansi:\
+ :tc=klone+color:tc=pcansi-m:
+pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines:\
+ :li#25:tc=pcansi:
+pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines:\
+ :li#33:tc=pcansi:
+pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines:\
+ :li#43:tc=pcansi:
+
+# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
+# If you want pound signs rather than dollars, replace `B' with `A'
+# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
+# From: Eric S. Raymond <[email protected]> Nov 6 1995
+ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes:\
+ :5i:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :cb=\E[1K:ch=\E[%i%dG:ct=\E[3g:cv=\E[%i%dd:ec=\E[%dX:ei=:\
+ :im=:kB=\E[Z:kI=\E[L:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :nw=\r\E[S:pf=\E[4i:po=\E[5i:s0=\E(B:s1=\E)B:s2=\E*B:\
+ :s3=\E+B:ta=\E[I:tc=pcansi-m:
+
+ansi+enq|ncurses extension for ANSI ENQ:\
+ :u6=\E[%i%d;%dR:u7=\E[6n:u9=\E[c:
+
+# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
+# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
+# From: Eric S. Raymond <[email protected]> Nov 6 1995
+ansi|ansi/pc-term compatible with color:\
+ :tc=ansi+enq:tc=ecma+color:tc=klone+sgr8:tc=ansi-m:
+
+# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
+# all the normal ANSI stuff with no extensions. It assumes
+# insert/delete line/char is there, so it won't work with
+# vt100 clones. It assumes video attributes for bold, blink,
+# underline, and reverse, which won't matter much if the terminal
+# can't do some of those. Padding is assumed to be zero, which
+# shouldn't hurt since xon/xoff is assumed.
+ansi-generic|generic ansi standard terminal:\
+ :am:xo:\
+ :co#80:li#24:tc=vanilla:tc=ansi+csr:tc=ansi+cup:\
+ :tc=ansi+rca:tc=ansi+erase:tc=ansi+tabs:tc=ansi+local:\
+ :tc=ansi+idc:tc=ansi+idl:tc=ansi+rep:tc=ansi+sgrbold:\
+ :tc=ansi+arrows:
+
+#### DOS ANSI.SYS variants
+#
+# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
+# documentation (except for the keyboard key reassignment feature, which
+# doesn't fit the <pfkey> model well). The klone+acs sequences were valid
+# though undocumented. The <pfkey> capability is untested but should work for
+# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
+# From: Eric S. Raymond <[email protected]> Nov 7 1995
+ansi.sys-old|ANSI.SYS under PC-DOS 2.1:\
+ :am:bs:mi:ms:xo:\
+ :co#80:li#25:\
+ :RA=\E[?7l:SA=\E[?7h:ce=\E[k:cl=\E[2J:cm=\E[%i%d;%dH:\
+ :do=\E[B:ho=\E[H:is=\E[m\E[?7h:kd=^J:kh=^^:kl=^H:kr=^L:\
+ :ku=^K:le=^H:nd=\E[C:rc=\E[u:sc=\E[s:u6=\E[%i%d;%dR:\
+ :u7=\E[6n:up=\E[A:tc=klone+color:tc=klone+sgr8:
+
+# Keypad: Home=\0G Up=\0H PrPag=\0I
+# ka1,kh kcuu1 kpp,ka3
+#
+# Left=\0K 5=\0L Right=\0M
+# kcub1 kb2 kcuf1
+#
+# End=\0O Down=\0P NxPag=\0Q
+# kc1,kend kcud1 kc3,knp
+#
+# Ins=\0R Del=\0S
+# kich1 kdch1
+#
+# On keyboard with 12 function keys,
+# shifted f-keys: F13-F24
+# control f-keys: F25-F36
+# alt f-keys: F37-F48
+# The shift/control/alt keys do not modify each other, but alt overrides both,
+# and control overrides shift.
+#
+# <pfkey> capability for F1-F48 -TD
+ansi.sys|ANSI.SYS 3.1 and later versions:\
+ :@7=\200O:F1=\200\205:F2=\200\206:F3=\200T:F4=\200U:\
+ :F5=\200V:F6=\200W:F7=\200X:F8=\200Y:F9=\200Z:FA=\200[:\
+ :FB=\200\\:FC=\200]:FD=\200\207:FE=\200\210:FF=\200\136:\
+ :FG=\200_:FH=\200`:FI=\200a:FJ=\200b:FK=\200c:FL=\200d:\
+ :FM=\200e:FN=\200f:FO=\200g:FP=\200\211:FQ=\200\212:\
+ :FR=\200h:FS=\200i:FT=\200j:FU=\200k:FV=\200l:FW=\200m:\
+ :FX=\200n:FY=\200o:FZ=\200p:Fa=\200q:Fb=\200\213:\
+ :Fc=\200\214:K1=\200G:K2=\200L:K3=\200I:K4=\200O:K5=\200Q:\
+ :ce=\E[K:k1=\200;:k2=\200<:k3=\200=:k4=\200>:k5=\200?:\
+ :k6=\200@:k7=\200A:k8=\200B:k9=\200C:k;=\200D:kB=\200^O:\
+ :kD=\200S:kI=\200R:kN=\200Q:kP=\200I:kb=^H:kd=\200P:\
+ :kh=\200G:kl=\200K:kr=\200M:ku=\200H:tc=ansi.sys-old:
+
+#
+# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
+# This should only be used when the terminal emulator cannot redefine the keys.
+# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
+# definitions must be restored. If the terminal emulator is quit while in vi
+# or others using :ks:/:ke:, the keypad will not be defined as per PC-DOS.
+# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
+# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
+# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
+# Note that :kl: is always BS, because PC-dos can tolerate this change.
+# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
+# Consequently the End keypad key could not be set (it is relatively safe and
+# actually useful because it sends ^@ O, which beeps and opens a line above).
+ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi:\
+ :is=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\
+ :ke=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p:\
+ :ks=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p:\
+ :tc=ansi.sys:
+#
+# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
+nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS:\
+ :al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\
+ :is=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n:\
+ :tc=ansi.sys:
+#
+# See ansi.sysk and nansi.sys above.
+nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi:\
+ :al=\E[1L:dc=\E[1P:dl=\E[1M:ei=:ic=\E[1@:im=:\
+ :is=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p:\
+ :tc=ansi.sysk:
+
+#### ANSI console types
+
+#
+# Atari ST terminals.
+# From Guido Flohr <[email protected]>.
+#
+tw52|tw52-color|Toswin window manager with color:\
+ :ut:\
+ :Co#16:pa#256:\
+ :oc=\Eb?\Ec0:op=\Eb?\Ec0:tc=tw52-m:
+tw52-m|Toswin window manager monochrome:\
+ :ul:\
+ :ma#999:\
+ :dc=\Ea:is=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0:md=\Eya:me=\Ez_:\
+ :mh=\EyB:mr=\EyP:rs=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0:se=\EzQ:\
+ :so=\EyQ:ue=\EzH:us=\EyH:tc=at-m:
+tt52|Atari TT medium and high resolution:\
+ :li#30:tc=at-color:
+st52-color|at-color|atari-color|atari_st-color|Atari ST with color:\
+ :ut:\
+ :Co#16:pa#256:\
+ :is=\Ev\Eq\Ee\Eb1\Ec0:rs=\Ev\Eq\Ee\Eb1\Ec0:tc=st52:
+st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST:\
+ :NP:am:eo:mi:\
+ :co#80:it#8:li#24:\
+ :#4=\Ed:%1=\EH:%i=\Ec:&8=\EK:F1=\Ep:F2=\Eq:F3=\Er:F4=\Es:\
+ :F5=\Et:F6=\Eu:F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:al=\EL:bl=^G:\
+ :cb=\Eo:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:dl=\EM:\
+ :do=\EB:ho=\EH:is=\Ev\Eq\Ee:k1=\EP:k2=\EQ:k3=\ER:k4=\ES:\
+ :k5=\ET:k6=\EU:k7=\EV:k8=\EW:k9=\EX:k;=\EY:kD=\177:kI=\EI:\
+ :kN=\Eb:kP=\Ea:kb=^H:kd=\EB:kh=\EE:kl=\ED:kr=\EC:ku=\EA:\
+ :le=\ED:me=\Eq:mr=\Ep:nd=\EC:nw=^M^J:rc=\Ek:rs=\Ev\Eq\Ee:\
+ :sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:up=\EA:ve=\Ee:\
+ :vi=\Ef:
+tw100|toswin vt100 window mgr:\
+ :eo:mi:ms:xo:\
+ :Co#8:co#80:it#8:li#24:pa#64:vt#3:\
+ :%1=\EH:&8=\EK:DL=\E[%dM:DO=\E[%dB:F1=\Ep:F2=\Eq:F3=\Er:\
+ :F4=\Es:F5=\Et:F6=\Eu:F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :ac=++,,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\EL:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\Ea:dl=\E[M:do=\EB:ei=\Ei:ho=\E[H:im=\Eh:\
+ :is=\E<\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
+ :k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:k;=\EOY:kD=\177:kI=\EI:\
+ :kN=\Eb:kP=\E\Ea:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E\EE:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:ll=\E[24H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\EC:nw=\EE:\
+ :oc=\E[30;47m:op=\E[30;47m:\
+ :r1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>:rc=\E8:\
+ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[?7h:ti=\E[?7l:ue=\E[m:up=\EA:us=\E[4m:ve=\Ee:vi=\Ef:
+# The entries for stv52 and stv52pc probably need a revision.
+stv52|MiNT virtual console:\
+ :am:ms:\
+ :co#80:it#8:li#30:\
+ :%1=\EH:&8=\EK:F1=\Ep:F2=\Eq:F3=\Er:F4=\Es:F5=\Et:F6=\Eu:\
+ :F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:al=\EL:bl=^G:cd=\EJ:ce=\EK:\
+ :cl=\EE:cm=\EY%+ %+ :cr=^M:dl=\EM:do=\EB:ho=\EH:k1=\EP:\
+ :k2=\EQ:k3=\ER:k4=\ES:k5=\ET:k6=\EU:k7=\EV:k8=\EW:k9=\EX:\
+ :k;=\EY:kD=\177:kI=\EI:kN=\Eb:kP=\Ea:kb=^H:kd=\EB:kh=\EE:\
+ :kl=\ED:kr=\EC:ku=\EA:le=^H:mb=\Er:md=\EyA:me=\Ez_:mh=\Em:\
+ :mr=\Ep:nd=\EC:nw=2*\r\n:op=\Eb@\EcO:r1=\Ez_\Eb@\EcA:\
+ :se=\Eq:sf=2*\n:so=\Ep:sr=2*\EI:ta=^I:te=\Ev\E. \Ee\Ez_:\
+ :ti=\Ev\Ee\Ez_:ue=\EzH:up=\EA:us=\EyH:ve=\E. \Ee:vi=\Ef:\
+ :vs=\E.":
+stv52pc|MiNT virtual console with PC charset:\
+ :am:ms:\
+ :co#80:it#8:li#30:\
+ :%1=\EH:&8=\EK:F1=\Ep:F2=\Eq:F3=\Er:F4=\Es:F5=\Et:F6=\Eu:\
+ :F7=\Ev:F8=\Ew:F9=\Ex:FA=\Ey:\
+ :ac=+\257,\256-\136.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\
+ :dl=\EM:do=\EB:ho=\EH:k1=\EP:k2=\EQ:k3=\ER:k4=\ES:k5=\ET:\
+ :k6=\EU:k7=\EV:k8=\EW:k9=\EX:k;=\EY:kD=\177:kI=\EI:kN=\Eb:\
+ :kP=\Ea:kb=^H:kd=\EB:kh=\EE:kl=\ED:kr=\EC:ku=\EA:le=^H:\
+ :mb=\Er:md=\EyA:me=\Ez_:mh=\Em:mr=\Ep:nd=\EC:nw=2*\r\n:\
+ :r1=\Ez_\Eb@\EcA:se=\Eq:sf=2*\n:so=\Ep:sr=2*\EI:ta=^I:\
+ :te=\Ev\E. \Ee\Ez_:ti=\Ev\Ee\Ez_:ue=\EzH:up=\EA:us=\EyH:\
+ :ve=\E. \Ee:vi=\Ef:vs=\E.":
+
+#### Atari ST
+#
+
+# From: Simson L. Garfinkel <[email protected]>
+atari-old|atari st:\
+ :am:bs:\
+ :co#80:it#8:li#25:\
+ :al=\EL:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :dl=\EM:do=\EB:\
+ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:me=\Eq:nd=\EC:se=\Eq:\
+ :so=\Ep:sr=\EI:ta=^I:up=\EA:
+# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
+# From: Paul M. Aoki <[email protected]>
+uniterm|uniterm49|UniTerm VT220 emulator with 49 lines:\
+ :li#49:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H:\
+ :tc=vt220:
+# MiNT VT52 emulation. 80 columns, 25 rows.
+# MiNT is Now TOS, the operating system which comes with all Ataris now
+# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
+# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
+# From: Per Persson <[email protected]>, 27 Feb 1996
+st52-old|Atari ST with VT52 emulation:\
+ :am:km:\
+ :co#80:li#25:\
+ :K1=\E#7:K2=\E#9:K3=\E#5:K4=\E#1:K5=\E#3:al=\EL:bl=^G:\
+ :cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dl=\EM:do=\EB:\
+ :ho=\EH:k0=\E#D:k1=\E#;:k2=\E#<:k3=\E#=:k4=\E#>:k5=\E#?:\
+ :k6=\E#@:k7=\E#A:k8=\E#B:k9=\E#C:kA=\E#R:kC=\E#7:kF=\E#2:\
+ :kR=\E#8:kb=^H:kd=\E#P:kh=\E#G:kl=\E#K:kr=\E#M:ku=\E#H:\
+ :l0=f10:le=\ED:me=\Eq:nd=\EC:nw=^M^J:r1=\Ez_\Eb@\EcA:\
+ :rc=\Ek:sc=\Ej:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:te=:ti=\Ee:\
+ :up=\EA:ve=\Ee:vi=\Ef:
+
+#### BeOS
+#
+# BeOS entry for Terminal program Seems to be almost ANSI
+beterm|BeOS Terminal:\
+ :am:eo:mi:ms:xn:xo:\
+ :Co#8:NC#5:co#80:it#8:li#25:pa#64:\
+ :&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
+ :DL=\E[%dM:DO=\E[%dB:F1=\E[21~:F2=\E[22~:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:Sb=\E[%+(m:Sf=\E[%+^^m:UP=\E[%dA:\
+ :al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:\
+ :ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[11~:k2=\E[12~:k3=\E[13~:\
+ :k4=\E[14~:k5=\E[15~:k6=\E[16~:k7=\E[17~:k8=\E[18~:\
+ :k9=\E[19~:k;=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:ke=\E[?4l:kh=\E[1~:kl=\E[D:kr=\E[C:\
+ :ks=\E[?4h:ku=\E[A:le=^H:md=\E[1m:me=\E[0;10m:mr=\E[7m:\
+ :nd=\E[C:nw=^M^J:op=\E[m:r1=\Ec:rc=\E8:sc=\E7:se=\E[m:sf=^J:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:\
+ :ue=\E[24m:up=\E[A:us=\E[4m:
+
+#### Linux consoles
+#
+
+# This entry is good for the 1.2.13 or later version of the Linux console.
+#
+# ***************************************************************************
+# * *
+# * WARNING: *
+# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
+# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
+# * character. Here are the keymap replacement lines that will set this up: *
+# * *
+# keycode 15 = Tab Tab
+# alt keycode 15 = Meta_Tab
+# shift keycode 15 = F26
+# string F26 ="\033[Z"
+# * *
+# * This has to use a key slot which is unfortunate (any unused one will *
+# * do, F26 is the higher-numbered one). The change ought to be built *
+# * into the kernel tables. *
+# * *
+# ***************************************************************************
+#
+# All linux kernels since 1.2.13 (at least) set the screen size
+# themselves; this entry assumes that capability.
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+linux-basic|linux console:\
+ :am:eo:mi:ms:ut:xn:xo:\
+ :NC#18:it#8:U8#1:\
+ :&7=^Z:@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
+ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
+ :IC=\E[%d@:K2=\E[G:Km=\E[M:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
+ :SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:\
+ :ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\
+ :do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
+ :k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mh=\E[2m:mr=\E[7m:nd=\E[C:\
+ :nw=^M^J:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:sf=^J:sr=\EM:\
+ :st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=200\E[?5h\E[?5l:tc=vt102+enq:tc=klone+sgr:\
+ :tc=ecma+color:
+
+linux-m|Linux console no color:\
+ :Co@:pa@:\
+ :AB@:AF@:Sb@:Sf@:tc=linux:
+
+# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
+# and it matters, turn off <ccc>. The %02x escape used to implement this is
+# not supposedly back-portable to older SV curses (although it has worked fine
+# on Solaris for several years) and not supported in ncurses versions before
+# 1.9.9.
+linux-c-nc|linux console with color-change:\
+ :cc:\
+ :oc=\E]R:tc=linux-basic:
+# From: Dennis Henriksen <[email protected]>, 9 July 1996
+linux-c|linux console 1.3.6+ for older ncurses:\
+ :cc:\
+ :oc=\E]R:tc=linux-basic:
+
+# The 2.2.x kernels add a private mode that sets the cursor type; use that to
+# get a block cursor for cvvis.
+# reported by Frank Heckenbach <[email protected]>.
+linux2.2|linux 2.2.x console:\
+ :ve=\E[?25h\E[?0c:vi=\E[?25l\E[?1c:vs=\E[?25h\E[?8c:\
+ :tc=linux-c-nc:
+
+# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
+# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
+# Using SI/SO has the drawback that it confuses screen. SCS would work.
+# However, SCS is buggy (see comment in Debian #515609) -TD
+linux2.6|linux 2.6.x console:\
+ :ae=^O:as=^N:me=\E[m\017:tc=linux2.2:
+
+# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
+linux3.0|linux 3.0 kernels:\
+ :E3=\E[3;J:tc=linux2.6:
+
+linux|linux console:\
+ :tc=linux3.0:
+
+# Subject: linux 2.6.26 vt back_color_erase
+# Changes to the Linux console driver broke bce model as reported in
+# https://bugzilla.novell.com/show_bug.cgi?id=418613
+# apparently from
+# http://lkml.org/lkml/2008/4/26/305
+# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
+linux2.6.26|linux console w/o bce:\
+ :ut@:tc=linux2.6:
+
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+linux-nic|linux with ich/ich1 suppressed for non-curses programs:\
+ :IC@:ic@:tc=linux:
+
+# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
+# acsc entry from Pavel Roskin" <[email protected]>, 29 Sep 1997.
+linux-koi8|linux with koi8 alternate character set:\
+ :ac=+\020,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\200q\200r\200s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224:\
+ :tc=linux:tc=klone+koi8acs:
+
+# Another entry for KOI8-r with Qing Long's acsc.
+# (which one better complies with the standard?)
+linux-koi8r|linux with koi8-r alternate character set:\
+ :tc=linux:tc=klone+koi8acs:
+
+# Entry for the latin1 and latin2 fonts
+linux-lat|linux with latin1 or latin2 alternate character set:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376:\
+ :tc=linux:
+
+# This uses graphics from VT codeset instead of from cp437.
+# reason: cp437 (aka "straight to font") is not functional under luit.
+# from: Andrey V Lukyanov <[email protected]>.
+linux-vt|linux console using VT codes for graphics:\
+ :S2@:S3@:\
+ :ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~:\
+ :ae=\E(K:as=\E(0:me=\E[0m\E(K\017:sa@:tc=linux:
+
+# This is based on the Linux console (relies on the console to perform some
+# of the functionality), but does not recognize as many control sequences.
+# The program comes bundled with an old (circa 1998) copy of the Linux
+# console terminfo. It recognizes some non-ANSI/VT100 sequences such as
+# \E* move cursor to home, as as \E[H
+# \E,X same as \E(X
+# \EE move cursor to beginning of row
+# \E[y,xf same as \E[y,xH
+#
+# Note: The status-line support is buggy (dsl does not work).
+kon|kon2|jfbterm|Kanji ON Linux console:\
+ :cc@:hs:\
+ :Ic@:Ip@:ds=\E[?H:fs=\E[?F:kB@:oc@:op=\E[37;40m:r1=\Ec:\
+ :ts=\E[?T:vb@:ve@:vi@:vs@:tc=linux:
+
+# 16-color linux console entry; this works with a 256-character
+# console font but bright background colors turn into dim ones when
+# you use a 512-character console font. This uses bold for bright
+# foreground colors and blink for bright background colors.
+linux-16color|linux console with 16 colors:\
+ :Co#16:NC#54:pa#256:tc=linux:
+
+# bterm (bogl 0.1.18)
+# Implementation is in bogl-term.c
+# Key capabilities from linux terminfo entry
+#
+# Notes:
+# bterm only supports acs using wide-characters, has case for these: qjxamlkut
+# bterm does not support sgr, since it only processes one parameter -TD
+bterm|bogl virtual terminal:\
+ :am:ut:\
+ :Co#8:co#80:li#24:pa#64:\
+ :&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:F1=\E[23~:F2=\E[24~:\
+ :F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\
+ :F8=\E[32~:F9=\E[33~:FA=\E[34~:K2=\E[G:Km=\E[M:\
+ :ac=aajjkkllmmqqttuuxx:ae=^O:as=^N:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:ho=\E[H:k1=\E[[A:\
+ :k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:kI=\E[2~:\
+ :kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:md=\E[1m:me=\E[0m:mr=\E[7m:nw=^M^J:\
+ :op=\E49;39m:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ue=\E[24m:\
+ :us=\E[4m:ve=\E[?25h:vi=\E[?25l:
+
+#### Mach
+#
+
+# From: Matthew Vernon <[email protected]>
+mach|Mach Console:\
+ :am:km:\
+ :co#80:it#8:li#25:\
+ :@7=\E[Y:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\
+ :cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
+ :k9=\EOX:k;=\EOY:kD=\E[9:kH=\E[F:kI=\E[@:kN=\E[U:kP=\E[V:\
+ :kb=\177:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:se=\E[0m:\
+ :sf=^J:so=\E[7m:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
+mach-bold|Mach Console with bold instead of underline:\
+ :ue=\E[0m:us=\E[1m:tc=mach:
+mach-color|Mach Console with ANSI color:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:mh=\E[2m:mk=\E[8m:op=\E[37;40m:\
+ :se=\E[27m:tc=mach:
+
+# From: Marcus Brinkmann
+# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
+#
+# Comments in the original are summarized here:
+#
+# hurd uses 8-bit characters (km).
+#
+# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
+#
+# Regarding compatibility to vt100: hurd doesn't specify :xn:, as we don't
+# have the eat_newline_glitch. It doesn't support setting or removing tab
+# stops (hts/tbc).
+#
+# hurd uses ^H instead of \E[D for cub1, as only ^H implements :bw: and it is
+# one byte instead three.
+#
+# :ic: is not included because hurd has insert mode.
+#
+# hurd doesn't use ^J for scrolling, because this could put things into the
+# scrollback buffer.
+#
+# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
+# This is a GNU extension.
+#
+# The original has commented-out ncv, but is restored here.
+#
+# Reading the source, RIS resets cnorm, but not xmous.
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+hurd|The GNU Hurd console server:\
+ :am:bw:eo:km:mi:ms:xo:\
+ :it#8:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :K2=\E[G:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:\
+ :UP=\E[%dA:ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:bt=\E[Z:\
+ :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ec=\E[%dX:\
+ :ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\
+ :kh=\E[1~:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\
+ :me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:sc=\E7:\
+ :se=\E[27m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[24m:\
+ :up=\E[A:us=\E[4m:vb=\Eg:ve=\E[?25h:vi=\E[?25l:vs=\E[34l:
+
+#### OSF Unix
+#
+
+# OSF/1 1.1 Snapshot 2
+pmcons|pmconsole|PMAX console:\
+ :am:\
+ :co#128:li#57:\
+ :bl=^G:cl=^L:cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:sf=^J:ta=^I:up=^K:
+
+# SCO console and SOS-Syscons console for 386bsd
+# (scoansi: had unknown capabilities
+# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
+# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
+# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
+# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
+# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
+# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
+# on the :as:=\E[12m -- esr)
+#
+# klone+sgr-dumb is an error since the acsc does not match -TD
+#
+# In this description based on SCO's keyboard(HW) manpage list of default
+# function key values:
+# F13-F24 are shifted F1-F12
+# F25-F36 are control F1-F12
+# F37-F48 are shift+control F1-F12
+#
+# hpa/vpa work in the console, but not in scoterm:
+# hpa=\E[%p1%dG,
+# vpa=\E[%p1%dd,
+#
+# SCO's terminfo uses
+# kLFT=\E[d,
+# kRIT=\E[c,
+# which do not work (console or scoterm).
+#
+# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+scoansi-old|SCO Extended ANSI standard crt (5.0.5):\
+ :am:bs:eo:xo:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[m\E[J:ce=\E[m\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
+ :ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\
+ :k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kD=\177:kI=\E[L:\
+ :kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0;10m:mr=\E[7m:\
+ :nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
+ :st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=10;12C:\
+ :vi=\E[=14;12C:vs=\E[=0;12C:
+scoansi-new|SCO Extended ANSI standard crt (5.0.6):\
+ :km:\
+ :MC=\E[=r:MR=\E[=3;0m:Zk=\E[=1;0m:Zl=\E[=1;%i%dm:\
+ :Zm=\E[=2;%i%dm:Zn=\E[=3;%i%dm:Zo=\E[=0;0m:\
+ :Zp=\E[=0;%i%dm:cs=\E[%i%d;%dr:mm=\E[=10L:mo=\E[=11L:\
+ :oc=\E[51m:op=\E[50m:rp=\E[%d;%db:ve=\E[=1c:vi=\E[=0c:\
+ :vs=\E[=2c:tc=scoansi-old:
+# make this easy to change...
+scoansi|SCO Extended ANSI standard crt:\
+ :tc=scoansi-old:
+
+# This actually describes the generic SVr4 display driver for Intel boxes.
+# The :mh=\E[2m: isn't documented and therefore may not be reliable.
+# From: Eric Raymond <[email protected]> Mon Nov 27 19:00:53 EST 1995
+att6386|at386|386at|AT&T WGS 6386 console:\
+ :am:bw:eo:xo:\
+ :co#80:it#8:li#25:\
+ :@7=\E[Y:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOZ:\
+ :F2=\EOA:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
+ :SR=\E[%dT:UP=\E[%dA:\
+ :ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
+ :ae=\E[10m:al=\E[1L:as=\E[12m:bl=^G:bt=\E[Z:cd=\E[J:\
+ :ce=\E[K:ch=\E[%i%dG:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
+ :ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[1M:do=\E[B:ec=\E[%dX:\
+ :ei=:ho=\E[H:ic=\E[1@:im=:is=\E[0;10;39m:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
+ :k;=\EOY:kB=^]:kD=\E[P:kI=\E[@:kM=\E0:kN=\E[U:kP=\E[V:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
+ :md=\E[1m:me=\E[0;10m:mh=\E[2m:mk=\E[9m:mr=\E[7m:nd=\E[C:\
+ :nw=\r\E[S:rc=\E8:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
+ :st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=1C:vi=\E[=C:\
+ :tc=klone+color:
+# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
+pc6300plus|AT&T 6300 plus:\
+ :am:bs:xo:\
+ :co#80:li#24:\
+ :al=\E[1L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[H:\
+ :cm=\E[%i%2;%2H:cr=^M:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[B:\
+ :ei=:ho=\E[H:ic=\E[1@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:\
+ :k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\EOk:k;=\EOu:kb=^H:\
+ :kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
+ :me=\E[m:mh=\E[2m:mk=\E[9m:mr=\E[7m:nd=\E[C:nw=^M^J:\
+ :se=\E[m:sf=^J:so=\E[7m:st=\EH:ue=\E[m:up=\E[A:us=\E[4m:\
+ :ve=\E[=1C:vi=\E[=C:
+
+# From: Benjamin C. W. Sittler <[email protected]>
+#
+# I have a UNIX PC which I use as a terminal attached to my Linux PC.
+# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
+# is broken. All the special key sequences are broken, making it unusable
+# with Emacs. The problem stems from the following:
+#
+# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
+# keypad!), loadable fonts, and strange highlighting modes ("dithered"
+# half-intensity, "smeared" bold, and real strike-out, for example.) It also
+# uses resizable terminal windows, but the bundled terminal program always
+# uses an 80x24 window (and doesn't support seem to support a 132-column
+# mode.)
+#
+# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
+# library which was a superset of SVr3.5 curses (called tam, for "terminal
+# access method".) tam includes support for real, overlapping windows,
+# onscreen function key labels, and bitmap graphics. But since the primary
+# user interface on the UNIX PC was a GUI program (ua, for "user
+# assistant",) and remote administration was considered important for the
+# machine, tam also supported VT100-compatible terminals attached to the
+# serial port or used across the StarLan network. To simulate the extra keys
+# not present on a VT100, users could press ESC and a two-letter sequence,
+# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
+# however, were not the same as those sent by the actual Undo key. The
+# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
+# (If you're interested in adding some of the tam calls to ncurses, btw, I
+# have the full documentation and several programs which use tam. It also
+# used an extended terminfo format to describe key sequences, special
+# highlighting modes, etc.)
+#
+# KEYS: This means that ncurses would quite painful on the UNIX PC, since
+# there are two sequences for every key-modifier combination (local keyboard
+# sequence and remote "VT100" sequence.) But I doubt many people are trying
+# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
+# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
+# seem to have been built from the manual describing the VT100 sequences.
+# This means it doesn't work for a real live UNIX PC.
+#
+# FONTS: The UNIX PC also has a strange interpretation of "alternate
+# character set". Rather than the VT100 graphics you might expect, it allows
+# up to 8 custom fonts to be loaded at any given time. This means that
+# programs expecting VT100 graphics will usually be disappointed. For this
+# reason I have disabled the smacs/rmacs sequences, but they could easily be
+# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
+# manpage), should you wish to do so:
+#
+# SGR10 - Select font 0 - ESC [ 10 m or SO
+# SGR11 - Select font 1 - ESC [ 11 m or SI
+# SGR12 - Select font 2 - ESC [ 12 m
+# ... (etc.)
+# SGR17 - Select font 7 - ESC [ 17 m
+#
+# Graphics for line drawing are not reliably found at *any* character
+# location because the UNIX PC has dynamically reloadable fonts. I use font
+# 0 for regular text and font 1 for italics, but this is by no means
+# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
+#
+# MISC: The cursor visible/cursor invisible sequences were swapped in the
+# distributed terminfo.
+#
+# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
+# the UNIX PC terminfo entry. The modified version works great with Lynx,
+# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
+# attached by serial cable. In Emacs, even the Undo key works, and many
+# applications can now use the F1-F8 keys.
+#
+# esr's notes:
+# Terminfo entry for the AT&T Unix PC 7300
+# from escape(7) in Unix PC 7300 Manual.
+# Somewhat similar to a vt100-am (but different enough
+# to redo this from scratch.)
+#
+# /***************************************************************
+# *
+# * FONT LOADING PROGRAM FOR THE UNIX PC
+# *
+# * This routine loads a font defined in the file ALTFONT
+# * into font memory slot #1. Once the font has been loaded,
+# * it can be used as an alternative character set.
+# *
+# * The call to ioctl with the argument WIOCLFONT is the key
+# * to this routine. For more information, see window(7) in
+# * the PC 7300 documentation.
+# ***************************************************************/
+# #include <string.h> /* needed for strcpy call */
+# #include <sys/window.h> /* needed for ioctl call */
+# #define FNSIZE 60 /* font name size */
+# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
+# /*
+# * The file /usr/lib/wfont/special.8.ft comes with the
+# * standard PC software. It defines a graphics character set
+# * similar to that of the Teletype 5425 terminal. To view
+# * this or other fonts in /usr/lib/wfont, use the command
+# * cfont <filename>. For further information on fonts see
+# * cfont(1) in the PC 7300 documentation.
+# */
+#
+# struct altfdata /* structure for alt font data */
+# {
+# short altf_slot; /* memory slot number */
+# char altf_name[FNSIZE]; /* font name (file name) */
+# };
+# ldfont()
+# {
+# int wd; /* window in which altfont will be */
+# struct altfdata altf;
+# altf.altf_slot=1;
+# strcpy(altf.altf_name,ALTFONT);
+# for (wd =1; wd < 12; wd++) {
+# ioctl(wd, WIOCLFONT,&altf);
+# }
+# }
+#
+# (att7300: added :vi:/:ve:/:ic:/<invis> from the BSDI entry,
+# they're confirmed by the man page for the System V display---esr)
+#
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300:\
+ :am:xo:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:al=\E[L:bl=^G:bt=\E^I:cd=\E[0J:ce=\E[0K:\
+ :cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ei=:ho=\E[H:i1=\017\E[=1w:ic=\E[@:im=:k1=\EOc:\
+ :k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:\
+ :kD=\ENf:kI=\ENj:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[9m:md=\E[1m:\
+ :me=\E[0;10m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:se=\E[m:\
+ :sf=^J:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[=0C:\
+ :vi=\E[=1C:
+
+# Sent by Stefan Stapelberg <[email protected]>, 24 Feb 1997, this is
+# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
+# for the application keypad mode. We have added iris-ansi-ap rather than
+# change the original to keypad mode.
+#
+# (iris-ansi: added rmam/smam based on init string -- esr)
+#
+# This entry, and those derived from it, is used in xwsh (also known as
+# winterm). Some capabilities that do not fit into the terminfo model
+# include the shift- and control-functionkeys:
+#
+# F1-F12 generate different codes when shift or control modifiers are used.
+# For example:
+# F1 \E[001q
+# shift F1 \E[013q
+# control-F1 \E[025q
+#
+# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
+# \EOP to \EOS. The shifted and control modifiers still do the same thing.
+#
+# The cursor keys also have different codes:
+# control-up \E[162q
+# control-down \E[165q
+# control-left \E[159q
+# control-right \E[168q
+#
+# shift-up \E[161q
+# shift-down \E[164q
+# shift-left \E[158q
+# shift-right \E[167q
+#
+# control-tab \[072q
+#
+iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100):\
+ :am:\
+ :co#80:it#8:li#40:\
+ :!2=\E[218q:#2=\E[143q:#4=\E[158q:%9=\E[209q:%f=\E[210q:\
+ :%i=\E[167q:&7=\E[217q:*4=\E[P:*7=\E[147q:@7=\E[146q:\
+ :@8=^M:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:F1=\E[011q:\
+ :F2=\E[012q:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=\E[M:do=^J:\
+ :ho=\E[H:is=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8:\
+ :k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
+ :k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:k;=\E[010q:\
+ :kB=\E[Z:kD=\177:kI=\E[139q:kM=\E[146q:kN=\E[154q:\
+ :kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=\E[D:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
+ :sc=\E7:se=\E[m:sf=\ED:so=\E[1;7m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[9/y\E[12/y\E[=6l:\
+ :vs=\E[10/y\E[=1h\E[=2l\E[=6h:
+iris-ansi-ap|IRIS ANSI in application-keypad mode:\
+ :@8=\EOM:F1=\E[011q:F2=\E[012q:is=\E[?1l\E=\E[?7h:\
+ :k9=\E[009q:k;=\E[010q:tc=iris-ansi:
+
+# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
+# (T.Dickey 98/1/24)
+iris-color|xwsh|IRIX ANSI with color:\
+ :NC#33:\
+ :DC=\E[%dP:IC=\E[%d@:ZH=\E[3m:ZR=\E[23m:cs=\E[%i%d;%dr:\
+ :ec=\E[%dX:ei=:im=:mh=\E[2m:r1=\Ec:\
+ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
+ :ue=\E[24m:tc=vt100+enq:tc=klone+color:tc=iris-ansi-ap:
+
+# The following is a version of the ibm-pc entry distributed with PC/IX,
+# (Interactive Systems' System 3 for the Big Blue), modified by Richard
+# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
+# (the former is untrue, and the latter failed under UCB/man); standout and
+# underline modes have been added. Note: this entry describes the "native"
+# capabilities of the PC monochrome display, without ANY emulation; most
+# communications packages (but NOT PC/IX connect) do some kind of emulation.
+pcix|PC/IX console:\
+ :am:bw:eo:\
+ :co#80:li#24:\
+ :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\
+ :le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:up=\E[A:\
+ :us=\E[4m:
+
+# (ibmpcx: this entry used to be known as ibmx.
+# It formerly included the following extension capabilities:
+# :GC=b:GL=v:GR=t:RT=^J:\
+# :GH=\E[196g:GV=\E[179g:\
+# :GU=\E[193g:GD=\E[194g:\
+# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
+# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
+# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
+# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
+# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
+# what was there before. -- esr)
+ibmpcx|xenix|ibmx|IBM PC xenix console display:\
+ :am:bs:ms:\
+ :co#80:li#25:\
+ :@7=\E[d:al=\E[L:cd=\E[J:ce=\E[K:cl=^L:cm=\E[%d;%dH:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[K:\
+ :k2=\E[L:k3=\E[M:k4=\E[N:kN=\E[e:kP=\E[Z:kb=^H:kd=\E[B:\
+ :kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:up=\E[A:\
+ :tc=klone+acs:tc=klone+sgr8:
+
+#### QNX
+#
+
+# QNX 4.0 Console
+# Michael's original version of this entry had <am@>, :ti=\Ei:,
+# :te=\Eh\ER:; this was so terminfo applications could write the lower
+# right corner without triggering a scroll. The ncurses terminfo library can
+# handle this case with the :ic: capability, and prefers :am: for better
+# optimization. Bug: The <op> capability resets attributes.
+# From: Michael Hunter <[email protected]> 30 Jul 1996
+# (removed: :sa=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,:)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+qnx|qnx4|qnx console:\
+ :km:mi:ms:xt:\
+ :co#80:it#4:li#25:\
+ :al=\EE:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\
+ :dc=\Ef:dl=\EF:do=^J:ei=:ho=\EH:ic=\Ee:im=:k1=\377\201:\
+ :k2=\377\202:k3=\377\203:k4=\377\204:k5=\377\205:\
+ :k6=\377\206:k7=\377\207:k8=\377\210:k9=\377\211:\
+ :kD=\377\254:kI=\377\253:kN=\377\252:kP=\377\242:\
+ :kd=\377\251:kh=\377\240:kl=\377\244:kr=\377\246:\
+ :ku=\377\241:le=^H:mb=\E{:md=\E<:me=\E}\E]\E>\E):mr=\E(:\
+ :nd=\EC:rp=\Eg%r%+ %.:se=\E):sf=^J:so=\E(:sr=\EI:ta=^I:\
+ :te=\Eh\ER:ti=\Ei:ue=\E]:up=\EA:us=\E[:ve=\Ey1:vi=\Ey0:\
+ :vs=\Ey2:
+#
+#
+qnxt|qnxt4|QNX4 terminal:\
+ :YB:tc=qnx4:
+#
+qnxm|QNX4 with mouse events:\
+ :Yd#1:\
+ :ZC=\E/:ZD=\E":ZJ=\E/>2h:ZT=\E/>2l:ZZ=\E/>1l\E/>9h:\
+ :Za=\E/>7h:Zb=\E/>7l:Zd=\E/>6l:Zf=\E/>1h:Zg=\E/>1h:\
+ :Zh=\E/>1h\E/>9l:Zi=\E/>6h:i1=\E/0t:tc=qnx4:
+#
+qnxw|QNX4 windows:\
+ :YD:tc=qnxm:
+#
+# Monochrome QNX4 terminal or console. Setting this terminal type will
+# allow an application running on a color console to behave as if it
+# were a monochrome terminal. Output will be through stdout instead of
+# console writes because the term routines will recognize that the
+# terminal name starts with 'qnxt'.
+#
+qnxtmono|Monochrome QNX4 terminal or console:\
+ :Co@:pa@:\
+ :sp@:tc=qnx4:
+
+# From: Federico Bianchi <[email protected]>, 1 Jul 1998
+# (esr: commented out <scp> and :te: to avoid warnings.)
+# (TD: derive from original qnx4 entry)
+qnxt2|qnx 2.15 serial terminal:\
+ :am:\
+ :!3@:%h@:%j@:&7@:Sb@:Sf@:dc@:ic@:rp@:se=\E>:so=\E<:te@:ti@:ve@:vi@:\
+ :vs@:tc=qnx4:
+
+# QNX ANSI terminal definition
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+qansi-g|QNX ANSI:\
+ :am:es:hs:xo:\
+ :co#80:it#8:li#25:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
+ :al=\E[1L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
+ :cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[1M:do=\E[B:ds=\E[r:ec=\E[%dX:ei=:fs=\E[?6h\E8:\
+ :ho=\E[H:i2=\E(B\E)0:ic=\E[1@:im=:\
+ :is=\E>\E[?1l\E[?7h\E[0;10;39;49m:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
+ :kD=\E[P:kI=\E[@:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[99H:mb=\E[5m:\
+ :md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :se=\E[27m:sf=\E[S:so=\E[7m:sr=\E[T:st=\EH:ta=^I:\
+ :ts=\E7\E1;24r\E[?6l\E[25;%i%dH:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
+ :vs=\E[?12;25h:
+#
+qansi|QNX ansi with console writes:\
+ :YA:YC:tc=qansi-g:
+#
+qansi-t|QNX ansi without console writes:\
+ :YB:tc=qansi:
+#
+qansi-m|QNX ansi with mouse:\
+ :Yd#1:\
+ :ZC=\E[:ZD=\E]:ZJ=\E[>2h:ZT=\E[>2l:ZZ=\E[>1l\E[>9h:\
+ :Za=\E[>7h:Zb=\E[>7l:Zd=\E[>6l:Zf=\E[>1h:Zg=\E[>1h:\
+ :Zh=\E[>1h\E[>9l:Zi=\E[>6h:i1=\E[0t:tc=qansi:
+#
+qansi-w|QNX ansi for windows:\
+ :YD:tc=qansi-m:
+
+#### NetBSD consoles
+#
+# pcvt termcap database entries (corresponding to release 3.31)
+# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
+#
+# (For the terminfo master file, I translated these into terminfo syntax.
+# Then I dropped all the pseudo-HP entries. we don't want and can't use
+# the :Xs: flag. Then I split :is: into a size-independent :i1: and a
+# size-dependent :is:. Finally, I added <rmam>/<smam> -- esr)
+
+# NOTE: :ic: has been taken out of this entry. for reference, it should
+# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
+# (esr: added :vi: and :ve: to resolve NetBSD Problem Report #4583)
+pcvtXX|pcvt vt200 emulator (DEC VT220):\
+ :am:km:mi:ms:xn:\
+ :it#8:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\
+ :SR=\E[%dT:UP=\E[%dA:\
+ :ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~:\
+ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
+ :i1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:im=\E[4h:\
+ :k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
+ :k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:kI=\E[2~:\
+ :kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\
+ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :r1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
+ :rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :ve=\E[?25h:vi=\E[?25l:
+
+# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+# 50 lines entries; 80 columns
+pcvt25|dec vt220 emulation with 25 lines:\
+ :co#80:li#25:\
+ :is=\E[1;25r\E[25;1H:tc=pcvtXX:
+pcvt28|dec vt220 emulation with 28 lines:\
+ :co#80:li#28:\
+ :is=\E[1;28r\E[28;1H:tc=pcvtXX:
+pcvt35|dec vt220 emulation with 35 lines:\
+ :co#80:li#35:\
+ :is=\E[1;35r\E[35;1H:tc=pcvtXX:
+pcvt40|dec vt220 emulation with 40 lines:\
+ :co#80:li#40:\
+ :is=\E[1;40r\E[40;1H:tc=pcvtXX:
+pcvt43|dec vt220 emulation with 43 lines:\
+ :co#80:li#43:\
+ :is=\E[1;43r\E[43;1H:tc=pcvtXX:
+pcvt50|dec vt220 emulation with 50 lines:\
+ :co#80:li#50:\
+ :is=\E[1;50r\E[50;1H:tc=pcvtXX:
+
+# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+# 50 lines entries; 132 columns
+pcvt25w|dec vt220 emulation with 25 lines and 132 cols:\
+ :co#132:li#25:\
+ :is=\E[1;25r\E[25;1H:tc=pcvtXX:
+pcvt28w|dec vt220 emulation with 28 lines and 132 cols:\
+ :co#132:li#28:\
+ :is=\E[1;28r\E[28;1H:tc=pcvtXX:
+pcvt35w|dec vt220 emulation with 35 lines and 132 cols:\
+ :co#132:li#35:\
+ :is=\E[1;35r\E[35;1H:tc=pcvtXX:
+pcvt40w|dec vt220 emulation with 40 lines and 132 cols:\
+ :co#132:li#40:\
+ :is=\E[1;40r\E[40;1H:tc=pcvtXX:
+pcvt43w|dec vt220 emulation with 43 lines and 132 cols:\
+ :co#132:li#43:\
+ :is=\E[1;43r\E[43;1H:tc=pcvtXX:
+pcvt50w|dec vt220 emulation with 50 lines and 132 cols:\
+ :co#132:li#50:\
+ :is=\E[1;50r\E[50;1H:tc=pcvtXX:
+
+# OpenBSD implements a color variation
+pcvt25-color|dec vt220 emulation with 25 lines and color:\
+ :co#80:li#25:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
+ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
+ :is=\E[1;25r\E[25;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
+ :k;=\E[29~:tc=pcvtXX:tc=ecma+color:
+
+# Terminfo entries to enable the use of the ncurses library in colour on a
+# NetBSD-arm32 console (only tested on a RiscPC).
+# Created by Dave Millen <[email protected]> 22.07.98
+# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
+# typo in invis - TD
+arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480):\
+ :am:ms:ut:xn:xo:\
+ :co#80:it#8:li#30:\
+ :@8=\E[M:DO=\E[%dB:K1=\E[q:K2=\E[r:K3=\E[s:K4=\E[p:K5=\E[n:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:k0=\E[y:k1=\E[P:\
+ :k2=\E[Q:k3=\E[R:k4=\E[S:k5=\E[t:k6=\E[u:k7=\E[v:k8=\E[l:\
+ :k9=\E[w:k;=\E[x:kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:\
+ :kr=\E[C:ks=\E[?1h\E=:ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:\
+ :me=2\E[0m:mk=2\E[8m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=^J:so=2\E[7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:tc=ecma+sgr:tc=klone+color:
+
+arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768):\
+ :co#132:li#50:tc=arm100:
+
+# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
+# manufactured by Sharp for the Japenese market.
+# From Minoura Makoto <[email protected]>, 12 May 1996
+x68k|x68k-ite|NetBSD/x68k ITE:\
+ :co#96:li#32:\
+ :%1=\E[28~:kC=\E[9~:tc=vt220:
+
+# <[email protected]>:
+# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
+#
+# (still unfinished, but good enough so far.)
+ofcons|DNARD OpenFirmware console:\
+ :bw:\
+ :co#80:li#30:\
+ :AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
+ :LE=\233%dD:RI=\233%dC:UP=\233%dA:al=\233L:bl=^G:cd=\233J:\
+ :ce=\233K:cl=^L:cm=\233%i%d;%dH:cr=^M:dc=\233P:dl=\233M:\
+ :do=\233B:ei=:ic=\233@:im=:k1=\2330P:k2=\2330Q:k3=\2330W:\
+ :k4=\2330x:k5=\2330t:k6=\2330u:k7=\2330q:k8=\2330r:\
+ :k9=\2330p:k;=\2330M:kD=\233P:kN=\233/:kP=\233?:kb=^H:\
+ :kd=\233B:kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\
+ :md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\
+ :nd=\233C:nw=^M^J:se=\2330m:sf=^J:ta=^I:ue=\2330m:up=\233A:\
+ :vb=^G:
+
+# NetBSD "wscons" emulator in vt220 mode.
+# This entry is based on the NetBSD termcap entry, correcting the ncv value.
+# The emulator renders underlined text in red. Colors are otherwise usable.
+#
+# Testing the emulator and reading the source code (NetBSD 2.0), it appears
+# that "vt220" is inaccurate. There are a few vt220-features, but most of the
+# vt220 screens in vttest do not work with this emulator. For instance, it
+# identifies itself (primary DA response) as a vt220 with selective erase. But
+# the selective erase feature does not work. The secondary response is copied
+# from Kermit's emulation of vt220, does not correspond to actual vt220. At
+# the level of detail in a termcap, it is a passable emulator, since ECH does
+# work. Don't use it on a VMS system -TD
+wsvt25|NetBSD wscons in 25 line DEC VT220 mode:\
+ :ms:ut:\
+ :Co#8:NC#2:co#80:it#8:li#25:pa#64:\
+ :@7=\E[8~:AB=\E[4%dm:AF=\E[3%dm:F1=\E[23~:F2=\E[24~:\
+ :is=\E[r\E[25;1H:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
+ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kh=\E[7~:op=\E[m:r1=\Ec:tc=vt220:
+
+wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta:\
+ :km:tc=wsvt25:
+
+# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
+# DECstation/pmax.
+rcons|BSD rasterconsole:\
+ :tc=sun-il:
+# Color version of above. Color currently only provided by NetBSD.
+rcons-color|BSD rasterconsole with ANSI color:\
+ :ut:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[m:tc=rcons:
+
+# mgterm -- MGL/MGL2, MobileGear Graphic Library
+# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
+# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
+# -- compare with cons25w
+mgterm:\
+ :NP:am:bs:bw:eo:km:ms:pt:ut:\
+ :Co#8:co#80:it#8:li#18:pa#64:\
+ :@7=\E[F:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[W:\
+ :F2=\E[X:IC=\E[%d@:K2=\E[E:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
+ :SR=\E[%dT:Sb=\E[4%dm:Sf=\E[3%dm:UP=\E[%dA:al=\E[L:bl=^G:\
+ :bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:cv=\E[%i%dd:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:\
+ :k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\
+ :k9=\E[U:k;=\E[V:kB=\E[Z:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[30;1m:mr=\E[7m:nd=\E[C:\
+ :nw=\E[E:op=\E[x:rc=\E8:rs=\E[x\E[m\Ec:sc=\E7:se=\E[m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:
+
+#### FreeBSD console entries
+#
+# From: Andrey Chernov <[email protected]> 29 Mar 1996
+# Andrey Chernov maintains the FreeBSD termcap distributions.
+#
+# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
+# or comment out the :cb: capability in the console entry.
+#
+# Alexander Lukyanov reports:
+# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
+# Now el1 clears not only to the line beginning, but also a large chunk
+# of previous line. But there is another bug - ech does not work at all.
+#
+
+# for syscons
+# common entry without semigraphics
+# Bug: The <op> capability resets attributes.
+# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
+# instance el1 does if the cursor is moved to the right margin first. Removed
+# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
+#
+# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
+# Note that this disables standout with color.
+#
+# The emulator sends difference strings based on shift- and control-keys,
+# like scoansi:
+# F13-F24 are shifted F1-F12
+# F25-F36 are control F1-F12
+# F37-F48 are shift+control F1-F12
+# (sgr removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode):\
+ :am:bw:eo:ms:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :K2=\E[E:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:\
+ :UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:k3=\E[O:\
+ :k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kD=\177:\
+ :kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mh=\E[30;1m:mr=\E[7m:nd=\E[C:nw=\E[E:rc=\E8:\
+ :rs=\E[x\E[m\Ec:sc=\E7:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
+ :ta=^I:up=\E[A:ve=\E[=0C:vs=\E[=1C:
+cons25|ansis|ansi80x25|freebsd console (25-line ansi mode):\
+ :ac=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371:\
+ :tc=cons25w:
+cons25-debian|freebsd console with debian backspace (25-line ansi mode):\
+ :kD=\E[3~:kb=\177:tc=cons25:
+cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode):\
+ :Co@:pa@:\
+ :AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25:
+cons30|ansi80x30|freebsd console (30-line ansi mode):\
+ :li#30:tc=cons25:
+cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode):\
+ :li#30:tc=cons25-m:
+cons43|ansi80x43|freebsd console (43-line ansi mode):\
+ :li#43:tc=cons25:
+cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode):\
+ :li#43:tc=cons25-m:
+cons50|ansil|ansi80x50|freebsd console (50-line ansi mode):\
+ :li#50:tc=cons25:
+cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode):\
+ :li#50:tc=cons25-m:
+cons60|ansi80x60|freebsd console (60-line ansi mode):\
+ :li#60:tc=cons25:
+cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode):\
+ :li#60:tc=cons25-m:
+cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic:\
+ :ac=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\200t\206u\207v\211w\210x\201y\230z\231~\225:\
+ :tc=cons25w:
+cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono):\
+ :Co@:pa@:\
+ :AB@:AF@:op@:ue=\E[m:us=\E[4m:tc=cons25r:
+cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines):\
+ :li#50:tc=cons25r:
+cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono):\
+ :li#50:tc=cons25r-m:
+cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines):\
+ :li#60:tc=cons25r:
+cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono):\
+ :li#60:tc=cons25r-m:
+# ISO 8859-1 FreeBSD console
+cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars:\
+ :ac=+\253,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237:\
+ :tc=cons25w:
+cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono):\
+ :Co@:pa@:\
+ :AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25l1:
+cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines):\
+ :li#50:tc=cons25l1:
+cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono):\
+ :li#50:tc=cons25l1-m:
+cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines):\
+ :li#60:tc=cons25l1:
+cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono):\
+ :li#60:tc=cons25l1-m:
+
+#### 386BSD and BSD/OS Consoles
+#
+
+# This was the original 386BSD console entry (I think).
+# Some places it's named oldpc3|oldibmpc3.
+# From: Alex R.N. Wetmore <[email protected]>
+origpc3|origibmpc3|IBM PC 386BSD Console:\
+ :am:bs:bw:eo:xo:\
+ :co#80:li#25:\
+ :ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
+ :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\
+ :kd=\E[B:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[7m:\
+ :me=\E[m\E[1;0x\E[2;7x:nd=\E[C:se=\E[1;0x\E[2;7x:\
+ :sf=\E[S:so=\E[1;7x\E[2;0x:sr=\E[T:ue=\E[1;0x\E[2;7x:\
+ :up=\E[A:us=\E[1;7x\E[2;0x:
+
+# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
+oldpc3|oldibmpc3|old IBM PC BSD/386 Console:\
+ :bs:km:\
+ :li#25:\
+ :al=\E[L:bl=^G:cr=^M:dl=\E[M:do=^J:kH=\E[F:kI=\E[L:kN=\E[G:\
+ :kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :md=\E[=15F:me=\E[=R:mh=\E[=8F:nw=^M^J:sf=^J:ta=^I:
+
+# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
+# Note, the emulator supports many of the additional console features
+# listed in the iBCS2 (e.g. character-set selection) though not all
+# are described here. This entry really ought to be upgraded.
+# Also note, the console will also work with fewer lines after doing
+# "stty rows NN", e.g. to use 24 lines.
+# (Color support from Kevin Rosenberg <[email protected]>, 2 May 1996)
+# Bug: The <op> capability resets attributes.
+bsdos-pc|IBM PC BSD/OS Console:\
+ :tc=bsdos-pc-nobold:
+
+bsdos-pc-nobold|BSD/OS PC console w/o bold:\
+ :tc=klone+color:tc=bsdos-pc-m:
+
+bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono:\
+ :am:bs:eo:km:xo:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\
+ :cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:kH=\E[F:\
+ :kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:rc=\E8:sc=\E7:sf=^J:\
+ :ta=^I:up=\E[A:tc=klone+sgr8:
+
+# Old names for BSD/OS PC console used in releases before 4.1.
+pc3|BSD/OS on the PC Console:\
+ :tc=bsdos-pc-nobold:
+ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\
+ :tc=bsdos-pc:
+
+# BSD/OS on the SPARC
+bsdos-sparc|Sun SPARC BSD/OS Console:\
+ :tc=sun:
+
+# BSD/OS on the PowerPC
+bsdos-ppc|PowerPC BSD/OS Console:\
+ :tc=bsdos-pc:
+
+#### DEC VT52
+# (<acsc>/:ae:/:as: capabilities aren't in DEC's official entry -- esr)
+#
+# Actually (TD pointed this out at the time the acsc string was added):
+# vt52 shouldn't define full acsc since most of the cells don't match.
+# see vt100 manual page A-31. This is the list that does match:
+# f degree
+# g plus/minus
+# h right-arrow
+# k down-arrow
+# m scan-1
+# o scan-3
+# q scan-5
+# s scan-7
+# The line-drawing happens to work in several terminal emulators, but should
+# not be used as a guide to the capabilities of the vt52. Note in particular
+# that vt52 does not support line-drawing characters (the scan-X values refer
+# to a crude plotting feature) -TD
+vt52|dec vt52:\
+ :bs:\
+ :co#80:it#8:li#24:\
+ :ac=+h.k0affggolpnqprrss:ae=\EG:as=\EF:bl=^G:cd=\EJ:\
+ :ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:do=\EB:ho=\EH:kb=^H:\
+ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:nd=\EC:nw=^M^J:sf=^J:\
+ :sr=\EI:ta=^I:up=\EA:
+
+#### DEC VT100 and compatibles
+#
+# DEC terminals from the vt100 forward are collected here. Older DEC terminals
+# and micro consoles can be found in the `obsolete' section. More details on
+# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
+# found near the end of this file.
+#
+# Except where noted, these entries are DEC's official terminfos.
+# Contact Bill Hedberg <[email protected]> of Terminal Support
+# Engineering for more information. Updated terminfos and termcaps
+# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+#
+# In October 1995 DEC sold its terminals business, including the VT and Dorio
+# line and trademark, to SunRiver Data Systems. SunRiver has since changed
+# its name to Boundless Technologies; see http://www.boundless.com.
+#
+
+# NOTE: Any VT100 emulation, whether in hardware or software, almost
+# certainly includes what DEC called the `Level 1 editing extension' codes;
+# only the very oldest VT100s lacked these and there probably aren't any of
+# those left alive. To capture these, use one of the VT102 entries.
+#
+# Note that the :xn: glitch in vt100 is not quite the same as on the Concept,
+# since the cursor is left in a different position while in the
+# weird state (concept at beginning of next line, vt100 at end
+# of this line) so all versions of vi before 3.7 don't handle
+# :xn: right on vt100. The correct way to handle :xn: is when
+# you output the char in column 80, immediately output CR LF
+# and then assume you are in column 1 of the next line. If :xn:
+# is on, am should be on too.
+#
+# I assume you have smooth scroll off or are at a slow enough baud
+# rate that it doesn't matter (1200? or less). Also this assumes
+# that you set auto-nl to "on", if you set it off use vt100-nam
+# below.
+#
+# The padding requirements listed here are guesses. It is strongly
+# recommended that xon/xoff be enabled, as this is assumed here.
+#
+# The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the
+# tab settings are in non-volatile memory and don't need to be
+# reset upon login. Also setting the number of columns glitches
+# the screen annoyingly. You can type "reset" to get them set.
+#
+# The VT100 series terminals have cursor ("arrows") keys which can operate
+# in two different modes: Cursor Mode and Application Mode. Cursor Mode
+# is the reset state, and is assumed to be the normal state. Application
+# Mode is the "set" state. In Cursor Mode, the cursor keys transmit
+# "Esc [ {code}" sequences, conforming to ANSI standards. In Application
+# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
+# was provided primarily as an aid to the porting of VT52 applications. It is
+# assumed that the cursor keys are normally in Cursor Mode, and expected that
+# applications such as vi will always transmit the :ks: string. Therefore,
+# the definitions for the cursor keys are made to match what the terminal
+# transmits after the :ks: string is transmitted. If the :ks: string
+# is a null string or is not defined, then cursor keys are assumed to be in
+# "Cursor Mode", and the cursor keys definitions should match that assumption,
+# else the application may fail. It is also expected that applications will
+# always transmit the :ke: string to the terminal before they exit.
+#
+# The VT100 series terminals have an auxiliary keypad, commonly referred to as
+# the "Numeric Keypad", because it is a cluster of numeric and function keys.
+# The Numeric Keypad which can operate in two different modes: Numeric Mode and
+# Application Mode. Numeric Mode is the reset state, and is assumed to be
+# the normal state. Application Mode is the "set" state. In Numeric Mode,
+# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
+# Enter key transmits the same as the Return key (Note: the Return key
+# can be configured to send either LF (\015) or CR LF). In Application Mode,
+# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
+# always send the same "Esc O {code}" sequences. It is assumed that the keypad
+# is normally in Numeric Mode. If an application requires that the keypad be
+# in Application Mode then it is expected that the user, or the application,
+# will set the TERM environment variable to point to a terminfo entry which has
+# defined the :ks: string to include the codes that switch the keypad into
+# Application Mode, and the terminfo entry will also define function key
+# fields to match the Application Mode control codes. If the :ks: string
+# is a null string or is not defined, then the keypad is assumed to be in
+# Numeric Mode. If the :ks: string switches the keypad into Application
+# Mode, it is expected that the :ke: string will contain the control codes
+# necessary to reset the keypad to "Normal" mode, and it is also expected that
+# applications which transmit the :ks: string will also always transmit the
+# :ke: string to the terminal before they exit.
+#
+# Here's a diagram of the VT100 keypad keys with their bindings.
+# The top line is the name of the key (some DEC keyboards have the keys
+# labelled somewhat differently, like GOLD instead of PF1, but this is
+# the most "official" name). The second line is the escape sequence it
+# generates in Application Keypad mode (where "$" means the ESC
+# character). The third line contains two items, first the mapping of
+# the key in terminfo, and then in termcap.
+# _______________________________________
+# | PF1 | PF2 | PF3 | PF4 |
+# | $OP | $OQ | $OR | $OS |
+# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
+# | 7 8 9 - |
+# | $Ow | $Ox | $Oy | $Om |
+# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
+# | 4 | 5 | 6 | , |
+# | $Ot | $Ou | $Ov | $Ol |
+# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
+# | 1 | 2 | 3 | |
+# | $Oq | $Or | $Os | enter |
+# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
+# | 0 | . | |
+# | $Op | $On | |
+# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
+#
+# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
+# terminfo guidelines. That is a compromise used to assign the remaining
+# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
+# support:
+vt100+keypad|dec vt100 numeric keypad no fkeys:\
+ :K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:
+vt100+pfkeys|dec vt100 numeric keypad:\
+ :@8=\EOM:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:tc=vt100+keypad:
+vt100+fnkeys|dec vt100 numeric keypad:\
+ :k0=\EOy:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\
+ :tc=vt100+pfkeys:
+#
+# A better adaptation to modern keyboards such as the PC's, which have a dozen
+# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
+# use the 5-key arrangement to model the arrow keys as suggested in the
+# terminfo guidelines:
+# _______________________________________
+# | PF1 | PF2 | PF3 | PF4 |
+# | $OP | $OQ | $OR | $OS |
+# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
+# | 7 8 9 - |
+# | $Ow | $Ox | $Oy | $Om |
+# |_ka1__K1_|_________|_ka3__K3_|_________|
+# | 4 | 5 | 6 | , |
+# | $Ot | $Ou | $Ov | $Ol |
+# |_________|_kb2__K2_|_________|_________|
+# | 1 | 2 | 3 | |
+# | $Oq | $Or | $Os | enter |
+# |_kc1__K4_|_________|_kc3__K5_| $OM |
+# | 0 | . | |
+# | $Op | $On | |
+# |___________________|_________|_kent_@8_|
+#
+vt220+keypad|dec vt220 numeric keypad:\
+ :@8=\EOM:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:
+#
+vt100+enq|ncurses extension for vt100-style ENQ:\
+ :u8=\E[?1;2c:tc=ansi+enq:
+vt102+enq|ncurses extension for vt102-style ENQ:\
+ :u8=\E[?6c:tc=ansi+enq:
+#
+# And here, for those of you with orphaned VT100s lacking documentation, is
+# a description of the soft switches invoked when you do `Set Up'.
+#
+# Scroll 0-Jump Shifted 3 0-#
+# | 1-Smooth | 1-British pound sign
+# | Autorepeat 0-Off | Wrap Around 0-Off
+# | | 1-On | | 1-On
+# | | Screen 0-Dark Bkg | | New Line 0-Off
+# | | | 1-Light Bkg | | | 1-On
+# | | | Cursor 0-Underline | | | Interlace 0-Off
+# | | | | 1-Block | | | | 1-On
+# | | | | | | | |
+# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
+# | | | | | | | |
+# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
+# | | | 1-On | | | 1-50 Hz
+# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
+# | | 1-ANSI | | 1-8 Bits
+# | Keyclick 0-Off | Parity 0-Off
+# | 1-On | 1-On
+# Margin Bell 0-Off Parity Sense 0-Odd
+# 1-On 1-Even
+#
+# The following SET-UP modes are assumed for normal operation:
+# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
+# WRAP_AROUND_ON JUMP_SCROLL_OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements; I recommend
+# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
+# Unless you have a graphics add-on such as Digital Engineering's VT640
+# (and even then, whenever it can be arranged!) you should set
+# INTERLACE_OFF
+#
+# (vt100: I added <rmam>/<smam> based on the init string, also :bs:. -- esr)
+vt100|vt100-am|dec vt100 (w/advanced video):\
+ :5i:am:bs:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:\
+ :l2=pf2:l3=pf3:l4=pf4:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[0m:\
+ :mr=2\E[7m:nd=2\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=^J:so=2\E[7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:tc=vt100+fnkeys:
+vt100nam|vt100-nam|vt100 no automargins:\
+ :am@:xn@:tc=vt100-am:
+vt100-vb|dec vt100 (w/advanced video) & no beep:\
+ :bl@:vb=\E[?5h\E[?5l:tc=vt100:
+
+# Ordinary vt100 in 132 column ("wide") mode.
+vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video):\
+ :co#132:li#24:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-am:
+vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin):\
+ :co#132:li#14:vt@:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-nam:
+
+# vt100 with no advanced video.
+vt100-nav|vt100 without advanced video option:\
+ :sg#1:\
+ :mb@:md@:me@:mr@:sa@:se=\E[m:so=\E[7m:ue@:us@:tc=vt100:
+vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option):\
+ :co#132:li#14:tc=vt100-nav:
+
+# vt100 with one of the 24 lines used as a status line.
+# We put the status line on the top.
+vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline:\
+ :es:hs:\
+ :li#23:\
+ :cl=50\E[2;1H\E[J:cm=5\E[%i%+^A;%dH:cs=\E[%i%i%d;%dr:\
+ :ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\
+ :ts=\E7\E[1;%dH\E[1K:tc=vt100-am:
+
+# Status line at bottom.
+# Clearing the screen will clobber status line.
+vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\
+ :es:hs:\
+ :li#23:\
+ :ds=\E7\E[1;24r\E8:fs=\E8:is=\E[1;23r\E[23;1H:\
+ :ts=\E7\E[24;%dH\E[1K:tc=vt100-am:
+
+# Most of the `vt100' emulators out there actually emulate a vt102
+# This entry (or vt102-nsgr) is probably the right thing to use for
+# these.
+vt102|dec vt102:\
+ :al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100:
+vt102-w|dec vt102 in wide mode:\
+ :co#132:\
+ :r3=\E[?3h:tc=vt102:
+
+# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
+# fail to interpret the ^O and ^N escapes properly. Symptom: the :me:
+# string in the canonical vt100 entry above leaves the screen littered
+# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
+# after highlight turnoffs. This entry should fix that, and even leave
+# ACS support working, at the cost of making multiple-highlight changes
+# slightly more expensive.
+# From: Eric S. Raymond <[email protected]> July 22 1995
+vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\
+ :me=\E[m:sa@:tc=vt102:
+
+# VT125 Graphics CRT. Clear screen also erases graphics
+# Some vt125's came configured with vt102 support.
+vt125|vt125 graphics terminal:\
+ :mi:\
+ :cl=50\E[H\E[2J\EPpS(E)\E\\:tc=vt100:
+
+# This isn't a DEC entry, it came from University of Wisconsin.
+# (vt131: I added <rmam>/<smam> based on the init string, also :bs: -- esr)
+vt131|dec vt131:\
+ :am:bs:xn:\
+ :co#80:it#8:li#24:vt#3:\
+ :RA=\E[?7h:SA=\E[?7h:bl=^G:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[;H\E[2J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :do=^J:ho=\E[H:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:\
+ :me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=^M^J:\
+ :r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
+ :se=2\E[m:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:
+
+# vt132 - like vt100 but slower and has ins/del line and such.
+# I'm told that :im:/:ei: are backwards in the terminal from the
+# manual and from the ANSI standard, this describes the actual
+# terminal. I've never actually used a vt132 myself, so this
+# is untested.
+#
+vt132|DEC vt132:\
+ :xn:\
+ :al=99\E[L:dc=7\E[P:dl=99\E[M:ei=\E[4h:im=\E[4l:ip=7:\
+ :sf=30\n:tc=vt100:
+
+# This vt220 description maps F5--F9 to the second block of function keys
+# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
+# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
+# PF1--PF4 are used as F1--F4.
+#
+vt220-old|vt200-old|DEC VT220 in vt100 emulation mode:\
+ :am:bs:mi:pt:xn:xo:\
+ :co#80:li#24:vt#3:\
+ :@7=\E[4~:RA=\E[?7l:SA=\E[?7h:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
+ :if=/usr/share/tabset/vt100:im=\E[4h:\
+ :is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
+ :k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
+ :kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=2\E[5m:\
+ :md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:nl=^J:rc=\E8:\
+ :rf=/usr/share/tabset/vt100:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[27m:\
+ :sf=20\ED:so=\E[7m:sr=14\EM:ta=^I:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:ve=\E[?25h:vi=\E[?25l:
+
+# A much better description of the VT200/220; used to be vt220-8
+# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
+# designation to accommodate bug in pcvt -TD
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+vt220|vt200|dec vt220:\
+ :5i:am:bs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:\
+ :DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:\
+ :F3=\E[25~:F4=\E[26~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
+ :FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
+ :SA=\E[?7h:UP=\E[%dA:ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:\
+ :cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :eA=\E)0:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
+ :if=/usr/share/tabset/vt100:im=\E[4h:\
+ :is=\E[?7h\E[>\E[?1h\E F\E[?4l:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :pf=\E[4i:po=\E[5i:ps=\E[i:r1=\E[?3l:rc=\E8:sc=\E7:\
+ :se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:\
+ :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:
+vt220-w|vt200-w|DEC vt220 in wide mode:\
+ :co#132:\
+ :r3=\E[?3h:tc=vt220:
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode:\
+ :am:bs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
+ :LE=\233%dD:RI=\233%dC:UP=\233%dA:ae=\E(B:al=\233L:\
+ :as=\E(0:bl=^G:cd=\233J:ce=\233K:cl=\233H\233J:\
+ :cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:ct=\2333g:\
+ :dc=\233P:dl=\233M:do=^J:ec=\233%dX:ei=\2334l:ho=\233H:\
+ :if=/usr/share/tabset/vt100:im=\2334h:\
+ :is=\233?7h\233>\233?1h\E F\233?4l:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:k8=\23319~:\
+ :k9=\23320~:kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\233B:\
+ :kh=\233H:kl=\233D:kr=\233C:ku=\233A:le=^H:mb=\2335m:\
+ :md=\2331m:me=2\2330m:mr=\2337m:nd=\233C:nw=\EE:rc=\E8:\
+ :sc=\E7:se=\23327m:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\23324m:up=\233A:us=\2334m:vb=\233?5h\233?5l:
+
+# vt220d:
+# This vt220 description regards F6--F10 as the second block of function keys
+# at the top of the keyboard. This mapping follows the description given
+# in the VT220 Programmer Reference Manual and agrees with the labeling
+# on some terminals that emulate the vt220. There is no support for an F5.
+# See vt220 for an alternate mapping.
+#
+vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
+ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:k5@:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
+ :tc=vt220-old:
+
+vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins:\
+ :am@:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
+
+# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
+# (not an official DEC entry!)
+# The problem with real vt220 terminals is they don't send escapes when in
+# in vt220 mode. This can be gotten around two ways. 1> don't send
+# escapes or 2> put the vt220 into vt100 mode and use all the nifty
+# features of vt100 advanced video which it then has.
+#
+# This entry takes the view of putting a vt220 into vt100 mode so
+# you can use the escape key in emacs and everything else which needs it.
+#
+# You probably don't want to use this on a VMS machine since VMS will think
+# it has a vt220 and will get fouled up coming out of emacs
+#
+# From: Alexander Latzko <[email protected]>, 30 Dec 1996
+# (Added vt100 :rc:,:sc: to quiet a tic warning -- esr)
+vt200-js|vt220-js|dec vt200 series with jump scroll:\
+ :am:\
+ :co#80:\
+ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:dm=:do=^J:ed=:\
+ :ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :nd=\E[C:nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=5\E[27m:\
+ :sf=\ED:so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
+
+# This was DEC's vt320. Use the purpose-built one below instead
+#vt320|DEC VT320 in vt100 emulation mode,
+# use=vt220,
+
+# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
+#
+vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode:\
+ :am@:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220:
+
+# These entries are not DEC's official ones, they were purpose-built for the
+# VT320. Here are the designer's notes:
+# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
+# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
+# khome is Home on a PC kbd. Actually 'FIND' on a VT.
+# Things that use <knxt> usually use tab anyways... and things that don't use
+# tab usually use <knxt> instead...
+# kprv is same as tab - Backtab is useless...
+# I left out :sa: because of its RIDICULOUS complexity,
+# and the resulting fact that it causes the termcap translation of the entry
+# to SMASH the 1k-barrier...
+# From: Adam Thompson <[email protected]> Sept 10 1995
+# (vt320: uncommented :fs: --esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+vt320|vt300|dec vt320 7 bit terminal:\
+ :am:es:hs:mi:ms:xn:\
+ :co#80:li#24:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\
+ :ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
+ :kh=\E[1~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ts=\E[1$}\E[H\E[K:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
+ :vi=\E[?25l:tc=vt220+keypad:
+vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy:\
+ :am@:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
+ :tc=vt320:
+# We have to init 132-col mode, not 80-col mode.
+vt320-w|vt300-w|dec vt320 wide 7 bit terminal:\
+ :co#132:ws#132:\
+ :is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :tc=vt320:
+vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am:\
+ :am@:\
+ :is=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H:\
+ :tc=vt320-w:
+
+# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
+# which are pretty much a superset of the VT320. They have the
+# host writable status line, yet another different DRCS matrix size,
+# and such, but they add the DEC Technical character set, Multiple text
+# pages, selectable length pages, and the like. The difference between
+# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
+# monitor, the former has 4 planes and a color monitor. These terminals
+# support VT131 and ANSI block mode, but as with much of these things,
+# termcap/terminfo doesn't deal with these features.
+#
+# Note that this entry is are set up in what was the standard way for GNU
+# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
+# keys were switched into application mode at the same time the numeric pad
+# is switched into application mode. This changes the definitions of the
+# arrow keys. Emacs v19 is smarter and mines its keys directly out of
+# your termcap or terminfo entry,
+#
+# From: Daniel Glasser <[email protected]>, 13 Oct 1993
+# (vt340: string capability "sb=\E[M" corrected to "sr";
+# also, added <rmam>/<smam> based on the init string -- esr)
+vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page:\
+ :am:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E(B:al=\E[L:as=\E(0:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
+ :fs=\E[$}:ho=\E[H:im=\E[4h:\
+ :is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
+ :le=^H:mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:\
+ :nw=^M\ED:r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt300:\
+ :sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
+
+# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
+# (originally written with vt420 as its primary name, and usable for it).
+#
+# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
+# text pages and long text pages with selectable length of the vt340, along
+# with left and right margins, rectangular area text copy, fill, and erase
+# operations, selected region character attribute change operations,
+# page memory and rectangle checksums, insert/delete column, reception
+# macros, and other features too numerous to remember right now. TERMCAP
+# can only take advantage of a few of these added features.
+#
+# Note that this entry is are set up in what was the standard way for GNU
+# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
+# keys were switched into application mode at the same time the numeric pad
+# is switched into application mode. This changes the definitions of the
+# arrow keys. Emacs v19 is smarter and mines its keys directly out of
+# your termcap entry,
+#
+# From: Daniel Glasser <[email protected]>, 13 Oct 1993
+# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
+# also, added <rmam>/<smam> based on the init string -- esr)
+vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap:\
+ :am:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E(B:al=\E[L:as=\E(0:cd=10\E[J:ce=4\E[K:cl=10\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
+ :fs=\E[$}:ho=\E[H:ic=\E[@:im=\E[4h:\
+ :is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
+ :le=^H:mb=\E[5m:md=\E[1m:me=2\E[0m:mr=\E[7m:nd=\E[C:\
+ :nw=^M\ED:r1=\E<\E[?3l\E[!p\E[?7h:rc=\E8:\
+ :rf=/usr/share/tabset/vt300:sc=\E7:se=\E[27m:sf=\ED:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[2$~\E[1$}\E[1;%dH:\
+ :ue=\E[24m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
+ :ve=\E[?25h:vi=\E[?25l:
+
+# (vt420: I removed :k0:, it collided with <kf10>. I also restored
+# a missing :sc: -- esr)
+vt420|DEC VT420:\
+ :am:mi:xn:xo:\
+ :co#80:li#24:vt#3:\
+ :*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
+ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :SA=\E[?7h:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
+ :i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
+ :im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
+ :k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:\
+ :mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:\
+ :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
+ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+
+# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
+# takes two parameters, the key and the string. Translating the key is
+# straightforward (keys 1-5 are not defined on real terminals, though some
+# emulators define these):
+#
+# if (key < 16) then value = key;
+# else if (key < 21) then value = key + 1;
+# else if (key < 25) then value = key + 2;
+# else if (key < 27) then value = key + 3;
+# else if (key < 30) then value = key + 4;
+# else value = key + 5;
+#
+# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
+# There's no provision in terminfo for emitting a string in this format, so the
+# application has to know it.
+#
+vt420pc|DEC VT420 w/PC keyboard:\
+ :@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[11;2~:F4=\E[12;2~:\
+ :F5=\E[13;2~:F6=\E[14;2~:F7=\E[15;2~:F8=\E[17;2~:\
+ :F9=\E[18;2~:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:\
+ :FD=\E[23;2~:FE=\E[24;2~:FF=\E[23~:FG=\E[24~:FH=\E[25~:\
+ :FI=\E[26~:FJ=\E[28~:FK=\E[29~:FL=\E[31~:FM=\E[32~:\
+ :FN=\E[33~:FO=\E[34~:FP=\E[35~:FQ=\E[36~:FR=\E[23;2~:\
+ :FS=\E[24;2~:FT=\E[25;2~:FU=\E[26;2~:FV=\E[28;2~:\
+ :FW=\E[29;2~:FX=\E[31;2~:FY=\E[32;2~:FZ=\E[33;2~:\
+ :Fa=\E[34;2~:Fb=\E[35;2~:Fc=\E[36;2~:\
+ :S6=USR_TERM\072vt420pcdos\072:k1=\E[11~:k2=\E[12~:\
+ :k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\177:kh=\E[H:tc=vt420:
+
+vt420pcdos|DEC VT420 w/PC for DOS Merge:\
+ :li#25:\
+ :S4=\E[?1;2r\E[34h:\
+ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:S6@:\
+ :me=\E[m:sa@:tc=vt420pc:
+
+vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
+ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
+ :kD=\177:kh=\E[H:l1=\EOP:l2=\EOQ:l3=\EOR:l4=\EOS:tc=vt420:
+
+vt510|DEC VT510:\
+ :tc=vt420:
+vt510pc|DEC VT510 w/PC keyboard:\
+ :tc=vt420pc:
+vt510pcdos|DEC VT510 w/PC for DOS Merge:\
+ :tc=vt420pcdos:
+
+# VT520/VT525
+#
+# The VT520 is a monochrome text terminal capable of managing up to
+# four independent sessions in the terminal. It has multiple ANSI
+# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
+# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
+# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
+#
+# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
+# [Alt]/[Print Screen] depending upon which keyboard and which
+# terminal mode is being used. If Set-Up has been disabled or
+# assigned to an unknown key, Set-Up may be entered by pressing
+# [F3] as the first key after power up, regardless of keyboard type.
+# (vt520: I added <rmam>/<smam> based on the init string, also :sc: -- esr)
+vt520|DEC VT520:\
+ :am:mi:xn:xo:\
+ :co#80:li#24:vt#3:\
+ :*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
+ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :SA=\E[?7h:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
+ :i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
+ :im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
+ :k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=2\E[5m:\
+ :md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:\
+ :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
+ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+
+# (vt525: I added <rmam>/<smam> based on the init string;
+# removed :se:=\E[m, :ue:=\E[m, added :sc: -- esr)
+vt525|DEC VT525:\
+ :am:mi:xn:xo:\
+ :co#80:li#24:vt#3:\
+ :*6=\E[4~:@0=\E[1~:RA=\E[?7l:\
+ :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :SA=\E[?7h:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=4\E(B:al=\E[L:as=2\E(0:bl=^G:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[2J:cm=10\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\
+ :i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\
+ :im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\
+ :k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=2\E[5m:\
+ :md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=\E[C:\
+ :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\
+ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+
+#### VT100 emulations
+#
+
+# John Hawkinson <[email protected]> tells us that the EWAN telnet for Windows
+# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
+# to telnetd. Michael Deutschmann <[email protected]> informs us
+# that this works best with a stock vt100 entry.
+dec-vt100|EWAN telnet's vt100 emulation:\
+ :tc=vt100:
+
+# From: Adrian Garside <[email protected]>, 19 Nov 1996
+dec-vt220|DOS tnvt200 terminal emulator:\
+ :am@:tc=vt220:
+
+# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
+# anyone who needs PC VT340 emulation. (or anything below that level, for
+# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
+# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
+# I can send the address if requested.
+# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
+# From: Adam Thompson <[email protected]> Sept 10 1995
+z340|zstem vt340 terminal emulator 132col 42line:\
+ :li#42:\
+ :is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H:\
+ :tc=vt320-w:
+z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins):\
+ :am@:\
+ :is=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H:\
+ :tc=z340:
+
+# CRT is shareware. It implements some xterm features, including mouse.
+crt|crt-vt220|CRT 2.3 emulating VT220:\
+ :ms:ut:\
+ :NC@:\
+ :st=\EH:tc=vt100+enq:tc=vt220:tc=ecma+color:
+
+# PuTTY 0.55 (released 3 August 2004)
+# http://www.chiark.greenend.org.uk/~sgtatham/putty/
+#
+# Comparing with 0.51, vttest is much better (only a few problems with the
+# cursor position reports and wrapping).
+#
+# PuTTY 0.51 (released 14 December 2000)
+#
+# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
+# well as SCO and Atari, color palettes from Linux console). Reading the code,
+# it is intended to be VT102 plus selected features. By default, it sets $TERM
+# to xterm, which is incorrect, since several features are misimplemented:
+#
+# Alt+key always sends ESC+key, so 'km' capability is removed.
+#
+# Control responses, wrapping and tabs are buggy, failing a couple of
+# screens in vttest.
+#
+# xterm mouse support is not implemented (unrelease version may).
+#
+# Several features such as backspace/delete are optional; this entry documents
+# the default behavior -TD
+
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+putty|PuTTY terminal emulator:\
+ :am:bw:hs:mi:ms:xn:xo:\
+ :it#8:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:K2=\E[G:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
+ :al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=\ED:ds=\E]0;\007:ec=\E[%dX:ei=\E[4l:fs=^G:\
+ :ho=\E[H:im=\E[4h:\
+ :is=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\E[B:kh=\E[1~:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:\
+ :rs=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l:sc=\E7:\
+ :se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[2J\E[?47l:ti=\E[?47h:ts=\E]0;:ue=\E[24m:up=\EM:\
+ :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
+ :tc=vt102+enq:
+vt100-putty|Reset PuTTY to pure vt100:\
+ :rs=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p:\
+ :tc=vt100:
+# palette is hardcoded...
+putty-256color|PuTTY 0.58 with xterm 256-colors:\
+ :Ic@:tc=xterm+256color:tc=putty:
+
+# One of the keyboard selections is "VT100+".
+# pterm (the X11 port) uses shifted F1-F10 as F11-F20
+putty-vt100|VT100+ keyboard layout:\
+ :F1=\EOZ:F2=\EO[:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
+ :k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:k;=\EOY:tc=putty:
+
+# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
+# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
+# (communication program) which supports:
+#
+# - Serial port connections.
+# - TCP/IP (telnet) connections.
+# - VT100 emulation, and selected VT200/300 emulation.
+# - TEK4010 emulation.
+# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
+# Quick-VAN).
+# - Scripts using the "Tera Term Language".
+# - Japanese and Russian character sets.
+#
+# The program does not come with terminfo or termcap entries. However, the
+# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
+# vt52 or doublesize character support; blinking is done with color). Besides
+# the HPA, VPA extensions it also implements CPL and CNL.
+#
+# All of the function keys can be remapped. This description shows the default
+# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
+# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
+# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
+# kfnd Insert
+# kslt Delete
+# kich1 Home
+# kdch1 PageUp
+# kpp End
+# knp PageDown
+#
+# ANSI colors are implemented, but cannot be combined with video attributes
+# except for reverse.
+#
+# No fonts are supplied with the program, so the acsc string is chosen to
+# correspond with the default Microsoft terminal font.
+#
+# Tera Term recognizes some xterm sequences, including those for setting and
+# retrieving the window title, and for setting the window size (i.e., using
+# "resize -s"), though it does not pass SIGWINCH to the application if the
+# user resizes the window with the mouse.
+teraterm2.3|Tera Term Pro:\
+ :km:xo@:\
+ :NC#43:vt@:\
+ :*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
+ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :al=\E[L:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cv=\E[%i%dd:dc=\E[P:dl=\E[M:ec=\E[%dX:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:mb=\E[5m:md=\E[1m:\
+ :me=\E[0m\017:mr=\E[7m:nd=\E[C:op=\E[100m:se=\E[27m:\
+ :so=\E[7m:sr=\EM:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=vt100+enq:\
+ :tc=klone+color:tc=vt100:
+
+# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
+# to choose a Windows OEM font).
+#
+# Testing with tack:
+# - it does not have xenl (suppress that)
+# - underline seems to work with color (modify ncv).
+# Testing with vttest:
+# - wrapping differs from vt100 (menu 1).
+# - it recognizes xterm's X10 and normal mouse tracking, but none of the
+# other flavors.
+# - it recognizes the dtterm window controls for reporting size in
+# characters and pixels.
+# - it passes SIGWINCH.
+teraterm4.59|Tera Term Pro:\
+ :ut:xn@:\
+ :NC#41:\
+ :Km=\E[M:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :tc=teraterm2.3:
+
+teraterm|Tera Term:\
+ :tc=teraterm4.59:
+
+# Tested with WinNT 4.0, the telnet application assumes the screensize is
+# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
+#
+# Other notes:
+# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
+# for casual (occasional) use. Also fails several of the vttest screens,
+# but that is not unusual for vt100 "emulators".
+# b) Does not implement vt100 keypad
+# c) Recognizes a subset of vt52 controls.
+ms-vt100|MS telnet imitating dec vt100:\
+ :li#25:\
+ :@8@:K1@:K2@:K3@:K4@:K5@:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :ct@:k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:k;@:tc=vt102+enq:\
+ :tc=vt100:
+
+# Tested with Windows 2000, the telnet application runs in a console window,
+# also using 'Terminal' font.
+#
+# Other notes:
+# a) This version has no function keys or numeric keypad. Unlike the older
+# version, the numeric keypad is entirely ignored.
+# b) The program sets $TERM to "ansi", which of course is inaccurate.
+ms-vt100-color|vtnt|windows 2000 ansi (sic):\
+ :ut:\
+ :DC=\E[%dP:IC=\E[%d@:ei=:im=:tc=ecma+color:tc=ms-vt100:
+
+# Based on comments from Federico Bianchi:
+#
+# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
+# scheme for PF keys.
+#
+# and PuTTY wishlist:
+#
+# The modifiers are represented as the codes listed above, prefixed to
+# the normal sequences. If the modifier is pressed alone, its sequence
+# is transmitted twice in succession. If multiple modifiers apply,
+# they're transmitted in the order shift, control, alt.
+#
+# Shift \E^S
+# Alt \E^A,
+# Ctrl \E^C,
+ms-vt100+|vt100+|windows XP vt100+ (sic):\
+ :@7=\Ek:F1=\E!:F2=\E@:F3=\E\023\E1:F4=\E\023\E2:\
+ :F5=\E\023\E3:F6=\E\023\E4:F7=\E\023\E5:F8=\E\023\E6:\
+ :F9=\E\023\E7:FA=\E\023\E8:FB=\E\023\E9:FC=\E\023\E0:\
+ :FD=\E\023\E!:FE=\E\023\E@:FF=\E\003\E1:FG=\E\003\E2:\
+ :FH=\E\003\E3:FI=\E\003\E4:FJ=\E\003\E5:FK=\E\003\E6:\
+ :FL=\E\003\E7:FM=\E\003\E8:FN=\E\003\E9:FO=\E\003\E0:\
+ :FP=\E\003\E!:FQ=\E\003\E@:FR=\E\001\E1:FS=\E\001\E2:\
+ :FT=\E\001\E3:FU=\E\001\E4:FV=\E\001\E5:FW=\E\001\E6:\
+ :FX=\E\001\E7:FY=\E\001\E8:FZ=\E\001\E9:Fa=\E\001\E0:\
+ :Fb=\E\001\E!:Fc=\E\001\E@:k1=\E1:k2=\E2:k3=\E3:k4=\E4:\
+ :k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:k;=\E0:kD=\E-:kI=\E+:\
+ :kN=\E/:kP=\E?:kh=\Eh:tc=ms-vt100-color:
+
+ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+:\
+ :tc=ms-vt100+:
+
+# expect-5.44.1.15/example/tkterm
+# a minimal subset of a vt100 (compare with "news-unk).
+#
+# The missing "=" in smkx is not a typo (here), but an error in tkterm.
+tt|tkterm|Don Libes' tk text widget terminal emulator:\
+ :cl=\E[H\E[J:cm=\E[%d;%dH:cr=^M:do=^J:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
+ :ke=\E[?1l\E>:ks=\E[?1h\E:le=^H:nd=\E[C:se=\E[m:sf=^J:\
+ :so=\E[7m:up=\E[A:
+
+######## X TERMINAL EMULATORS
+#### XTERM
+#
+# You can add the following line to your .Xdefaults to change the terminal type
+# set by the xterms you start up to my-xterm:
+#
+# *termName: my-xterm
+#
+# System administrators can change the default entry for xterm instances
+# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
+# case, xterm will detect and reject an invalid terminal type, falling back
+# to the default of xterm.
+#
+
+# X10/6.6 11/7/86, minus alternate screen, plus (csr)
+# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
+# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
+# as these seem not to work -- esr)
+x10term|vs100-x10|xterm terminal emulator (X10 window system):\
+ :am:bs:km:mi:ms:xn:xo:\
+ :co#80:it#8:li#65:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:RA=\E[?7l:SA=\E[?7h:\
+ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
+ :im=\E[4h:is=\E\E[m\E[?7h\E[?1;4l:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:me=\E[m:\
+ :mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+# Compatible with the R5 xterm
+# (from the XFree86 3.2 distribution, <blink=@> removed)
+# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
+# corrected typos in rs2 string - TD
+# added u6-u9 -TD
+xterm-r5|xterm R5 version:\
+ :am:bs:km:ms:xn:\
+ :co#80:it#8:li#24:\
+ :@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:\
+ :im=\E[4h:k0=\EOq:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
+ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kA=\E[30~:kD=\E[3~:kE=\E[8~:kI=\E[2~:kL=\E[31~:\
+ :kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:\
+ :me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
+ :rs=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H:\
+ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:tc=vt100+enq:
+# Compatible with the R6 xterm
+# (from XFree86 3.2 distribution, <acsc> and :it: added, <blink@> removed)
+# added khome/kend, hts based on the R6 xterm code - TD
+# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
+# for compatibility with other emulators).
+xterm-r6|xterm-old|xterm X11R6 version:\
+ :am:bs:km:mi:ms:xn:\
+ :co#80:it#8:li#24:\
+ :*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
+ :DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
+ :F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
+ :FA=\E[34~:Km=\E[M:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:eA=\E)0:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :md=\E[1m:me=\E[m:ml=\El:mr=\E[7m:mu=\Em:nd=\E[C:rc=\E8:\
+ :rs=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[m:up=\E[A:\
+ :us=\E[4m:tc=vt100+enq:
+# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
+# The name has been changed and some aliases have been removed.
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System):\
+ :am:bs:km:mi:ms:xn:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
+ :is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\177:kI=\E[2~:\
+ :kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\EOH:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:md=\E[1m:\
+ :me=\E[0m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:\
+ :ti=\E7\E[?47h:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=vt100+enq:\
+ :tc=ecma+color:tc=vt220+keypad:
+
+# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
+# codes for F1-F4 except while in VT220 mode.
+xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System):\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:tc=xterm-xf86-v32:
+
+# This version was released in XFree86 3.3.3 (November 1998).
+# Besides providing printer support, it exploits a new feature that allows
+# xterm to use terminfo-based descriptions with the titeInhibit resource.
+# -- the distribution contained incorrect khome/kend values -TD
+xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System):\
+ :5i:\
+ :*6@:@0@:ic@:is=\E[!p\E[?3;4l\E[4l\E>:kD=\E[3~:mb=\E[5m:\
+ :mk=\E[8m:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\Ec:\
+ :r2=\E[!p\E[?3;4l\E[4l\E>:te=\E[?1047l\E[?1048l:\
+ :ti=\E[?1048h\E[?1047h:tc=xterm-xf86-v33:
+
+# This version was released in XFree86 4.0.
+xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System):\
+ :NP:\
+ :#2=\EO5H:#3=\E[2;5~:#4=\EO5D:%c=\E[6;5~:%e=\E[5;5~:\
+ :%i=\EO5C:*4=\E[3;5~:*7=\EO5F:@7=\EOF:F3=\EO2P:F4=\EO2Q:\
+ :F5=\EO2R:F6=\EO2S:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:\
+ :FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:\
+ :FE=\E[24;2~:FF=\EO5P:FG=\EO5Q:FH=\EO5R:FI=\EO5S:\
+ :FJ=\E[15;5~:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:\
+ :FN=\E[20;5~:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:\
+ :FR=\EO6P:FS=\EO6Q:FT=\EO6R:FU=\EO6S:FV=\E[15;6~:\
+ :FW=\E[17;6~:FX=\E[18;6~:FY=\E[19;6~:FZ=\E[20;6~:\
+ :Fa=\E[21;6~:Fb=\E[23;6~:Fc=\E[24;6~:K1@:K2=\EOE:K3@:K4@:\
+ :K5@:kB=\E[Z:kD=\E[3~:kh=\EOH:te=\E[?1049l:ti=\E[?1049h:\
+ :tc=xterm-xf86-v333:
+
+# This version was released in XFree86 4.3.
+xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System):\
+ :#2=\E[1;2H:#3=\E[2;2~:#4=\E[1;2D:%c=\E[6;2~:%e=\E[5;2~:\
+ :%i=\E[1;2C:*4=\E[3;2~:*7=\E[1;2F:@1@:tc=xterm-xf86-v40:
+
+# This version was released in XFree86 4.4.
+xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System):\
+ :SF=\E[%dS:SR=\E[%dT:ve=\E[?12l\E[?25h:vs=\E[?12;25h:\
+ :tc=xterm-xf86-v43:
+
+xterm-xfree86|xterm terminal emulator (XFree86):\
+ :tc=xterm-xf86-v44:
+
+# This version reflects the current xterm features.
+xterm-new|modern xterm terminal emulator:\
+ :NP:\
+ :@8=\EOM:K2=\EOE:SF=\E[%dS:SR=\E[%dT:kB=\E[Z:\
+ :tc=xterm+pcfkeys:tc=xterm+tmux:tc=xterm-basic:
+#
+# This fragment describes as much of XFree86 xterm's "pc-style" function
+# keys as will fit into terminfo's 60 function keys.
+# From ctlseqs.ms:
+# Code Modifiers
+# ---------------------------------
+# 2 Shift
+# 3 Alt
+# 4 Shift + Alt
+# 5 Control
+# 6 Shift + Control
+# 7 Alt + Control
+# 8 Shift + Alt + Control
+# ---------------------------------
+# The meta key may also be used as a modifier in this scheme, adding another
+# bit to the parameter.
+xterm+pcfkeys|fragment for PC-style fkeys:\
+ :tc=xterm+app:tc=xterm+pcf2:tc=xterm+pcc2:tc=xterm+pce2:
+#
+xterm+noapp|fragment with cursor keys in normal mode:\
+ :@7=\E[F:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
+
+xterm+app|fragment with cursor keys in application mode:\
+ :@7=\EOF:kd=\EOB:kh=\EOH:kl=\EOD:kr=\EOC:ku=\EOA:
+#
+# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
+# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
+# the earlier scheme, as noted in the "use=" clauses in this file.
+#
+# The original assignments from patch #94 for cursor-keys had some technical
+# issues:
+#
+# A parameter for a function-key to represent a modifier is just more
+# bits. But for a cursor-key it may change the behavior of the
+# application. For instance, emacs decodes the first parameter of a
+# cursor-key as a repeat count.
+#
+# A parameterized string should (really) not begin with SS3 (\EO).
+# Rather, CSI (\E[) should be used.
+#
+# For these reasons, the original assignments were deprecated. For
+# compatibility reasons, they are still available as a setting of xterm's
+# modifyCursorKeys resource. These fragments list the modified cursor-keys
+# that might apply to xterm+pcfkeys with different values of that resource.
+xterm+pcc3|fragment with modifyCursorKeys=3:\
+ :#4=\E[>1;2D:%i=\E[>1;2C:kF=\E[>1;2B:kR=\E[>1;2A:
+
+xterm+pcc2|fragment with modifyCursorKeys=2:\
+ :#4=\E[1;2D:%i=\E[1;2C:kF=\E[1;2B:kR=\E[1;2A:
+
+xterm+pcc1|fragment with modifyCursorKeys=1:\
+ :#4=\E[2D:%i=\E[2C:kF=\E[2B:kR=\E[2A:
+
+xterm+pcc0|fragment with modifyCursorKeys=0:\
+ :#4=\EO2D:%i=\EO2C:kF=\EO2B:kR=\EO2A:
+
+#
+# Here are corresponding fragments from xterm patch #216:
+#
+xterm+pcf0|fragment with modifyFunctionKeys=0:\
+ :F1=\E[23~:F2=\E[24~:F3=\EO2P:F4=\EO2Q:F5=\EO2R:F6=\EO2S:\
+ :F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:FA=\E[19;2~:\
+ :FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:FE=\E[24;2~:\
+ :FF=\EO5P:FG=\EO5Q:FH=\EO5R:FI=\EO5S:FJ=\E[15;5~:\
+ :FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:FN=\E[20;5~:\
+ :FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:FR=\EO6P:FS=\EO6Q:\
+ :FT=\EO6R:FU=\EO6S:FV=\E[15;6~:FW=\E[17;6~:FX=\E[18;6~:\
+ :FY=\E[19;6~:FZ=\E[20;6~:Fa=\E[21;6~:Fb=\E[23;6~:\
+ :Fc=\E[24;6~:Fd=\EO3P:Fe=\EO3Q:Ff=\EO3R:Fg=\EO3S:\
+ :Fh=\E[15;3~:Fi=\E[17;3~:Fj=\E[18;3~:Fk=\E[19;3~:\
+ :Fl=\E[20;3~:Fm=\E[21;3~:Fn=\E[23;3~:Fo=\E[24;3~:\
+ :Fp=\EO4P:Fq=\EO4Q:Fr=\EO4R:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:k;=\E[21~:
+#
+xterm+pcf2|fragment with modifyFunctionKeys=2:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[1;2P:F4=\E[1;2Q:F5=\E[1;2R:\
+ :F6=\E[1;2S:F7=\E[15;2~:F8=\E[17;2~:F9=\E[18;2~:\
+ :FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:FD=\E[23;2~:\
+ :FE=\E[24;2~:FF=\E[1;5P:FG=\E[1;5Q:FH=\E[1;5R:FI=\E[1;5S:\
+ :FJ=\E[15;5~:FK=\E[17;5~:FL=\E[18;5~:FM=\E[19;5~:\
+ :FN=\E[20;5~:FO=\E[21;5~:FP=\E[23;5~:FQ=\E[24;5~:\
+ :FR=\E[1;6P:FS=\E[1;6Q:FT=\E[1;6R:FU=\E[1;6S:FV=\E[15;6~:\
+ :FW=\E[17;6~:FX=\E[18;6~:FY=\E[19;6~:FZ=\E[20;6~:\
+ :Fa=\E[21;6~:Fb=\E[23;6~:Fc=\E[24;6~:Fd=\E[1;3P:\
+ :Fe=\E[1;3Q:Ff=\E[1;3R:Fg=\E[1;3S:Fh=\E[15;3~:\
+ :Fi=\E[17;3~:Fj=\E[18;3~:Fk=\E[19;3~:Fl=\E[20;3~:\
+ :Fm=\E[21;3~:Fn=\E[23;3~:Fo=\E[24;3~:Fp=\E[1;4P:\
+ :Fq=\E[1;4Q:Fr=\E[1;4R:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:
+#
+# Chunks from xterm #230:
+xterm+pce2|fragment with modifyCursorKeys=2:\
+ :#2=\E[1;2H:#3=\E[2;2~:%c=\E[6;2~:%e=\E[5;2~:*4=\E[3;2~:\
+ :*7=\E[1;2F:kI=\E[2~:kN=\E[6~:kP=\E[5~:tc=xterm+edit:
+
+xterm+edit|fragment for 6-key editing-keypad:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:tc=xterm+pc+edit:
+
+xterm+pc+edit|fragment for pc-style editing keypad:\
+ :@7=\E[4~:kh=\E[1~:
+
+xterm+vt+edit|fragment for vt220-style editing keypad:\
+ :*6=\E[4~:@0=\E[1~:
+
+#
+# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
+# Alternatively, the same scheme with old-style function keys as in xterm-r6
+# is shown here (because that is used in mrxvt and mlterm):
+xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys=2:\
+ :F3=\E[11;2~:F4=\E[12;2~:F5=\E[13;2~:F6=\E[14;2~:\
+ :FF=\E[11;5~:FG=\E[12;5~:FH=\E[13;5~:FI=\E[14;5~:\
+ :FR=\E[11;6~:FS=\E[12;6~:FT=\E[13;6~:FU=\E[14;6~:\
+ :Fd=\E[11;3~:Fe=\E[12;3~:Ff=\E[13;3~:Fg=\E[14;3~:\
+ :Fp=\E[11;4~:Fq=\E[12;4~:Fr=\E[13;4~:k1=\E[11~:k2=\E[12~:\
+ :k3=\E[13~:k4=\E[14~:tc=xterm+pcf2:
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|modern xterm terminal emulator - common:\
+ :5i:am:bs:km:mi:ms:ut:xn:AX:\
+ :Co#8:co#80:it#8:li#24:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
+ :DO=\E[%dB:IC=\E[%d@:Km=\E[M:LE=\E[%dD:RA=\E[?7l:\
+ :RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\
+ :ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:dl=\E[M:\
+ :do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E[!p\E[?3;4l\E[4l\E>:kb=^H:ke=\E[?1l\E>:\
+ :ks=\E[?1h\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mk=\E[8m:\
+ :ml=\El:mm=\E[?1034h:mo=\E[?1034l:mr=\E[7m:mu=\Em:nd=\E[C:\
+ :op=\E[39;49m:pf=\E[4i:po=\E[5i:ps=\E[i:r1=\Ec:\
+ :r2=\E[!p\E[?3;4l\E[4l\E>:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E[?1049l:ti=\E[?1049h:\
+ :ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:\
+ :ve=\E[?12l\E[?25h:vi=\E[?25l:vs=\E[?12;25h:\
+ :tc=vt100+enq:
+
+# From: David J. MacKenzie <[email protected]>, 14 Nov 1997
+# In retrospect, something like xterm-r6 was intended here -TD
+xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1:\
+ :se=\E[m:ue=\E[m:tc=xterm-xf86-v33:
+
+# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# If configured to support 88- or 256-colors (which is fairly common in 2009),
+# xterm also recognizes the control sequences for initc -TD
+xterm-16color|xterm with 16 colors like aixterm:\
+ :cc:tc=ibm+16color:tc=xterm-new:
+
+# 256-colors is a compile-time feature of XFree86 xterm beginning with
+# patch #111 (1999/7/10) -TD
+xterm+256color|xterm 256-color feature:\
+ :cc:\
+ :Co#256:pa#32767:\
+ :AB=\E[48;5;%dm:AF=\E[38;5;%dm:Sb@:Sf@:
+
+# 88-colors is a compile-time feature of XFree86 xterm beginning with
+# patch #115 (1999/9/18) -TD
+#
+# Note that the escape sequences used are the same as for 256-colors - xterm
+# has a different table of default color resource values. If built for
+# 256-colors, it can still handle an 88-color palette by using the initc
+# capability.
+#
+# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
+# which support the xterm+256color feature support the associated initc
+# capability. So it is cancelled in the entries which use this and/or the
+# xterm+256color block.
+#
+# The default color palette for the 256- and 88-colors are different. A
+# given executable will have one palette (perhaps compiled-in). If the program
+# supports xterm's control sequence, it can be programmed using initc.
+xterm+88color|xterm 88-color feature:\
+ :Co#88:pa#7744:tc=xterm+256color:
+
+# These variants of XFree86 3.9.16 xterm are built as a configure option.
+xterm-256color|xterm with 256 colors:\
+ :tc=xterm+256color:tc=xterm-new:
+xterm-88color|xterm with 88 colors:\
+ :tc=xterm+88color:tc=xterm-256color:
+
+# These two are used to demonstrate the any-event mouse support, i.e., by
+# using an extended name "XM" which tells ncurses to put the terminal into
+# a special mode when initializing the xterm mouse.
+xterm-1002|testing xterm-mouse:\
+ :XM=\E[?1002%?%p1%{1}%=%th%el%;:tc=xterm-new:
+xterm-1003|testing xterm-mouse:\
+ :XM=\E[?1003%?%p1%{1}%=%th%el%;:tc=xterm-new:
+
+# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
+# asked for some of xterm's advanced features to be added to its terminfo
+# entry. It defines extended capabilities not found in standard terminfo or
+# termcap. These are useful in tmux, for instance, hence the name.
+#
+# One caveat in adding extended capabilities in ncurses is that if the names
+# are longer than two characters, then they will not be visible through the
+# termcap interface.
+#
+# Ms modifies the selection/clipboard. Its parameters are
+# p1 = the storage unit (clipboard, selection or cut buffer)
+# p2 = the base64-encoded clipboard content.
+#
+# Ss is used to set the cursor style as described by the DECSCUSR
+# function to a block or underline.
+# Se resets the cursor style to the terminal power-on default.
+#
+# Cs and Ce set and reset the cursor colour.
+xterm+tmux|advanced xterm features used in tmux:\
+ :Cr=\E]112\007:Cs=\E]12;%p1%s\007:\
+ :Ms=\E]52;%p1%s;%p2%s\007:Se=\E[2 q:Ss=\E[%p1%d q:
+
+# This is another variant, for XFree86 4.0 xterm (T.Dickey)
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above.
+#
+# HTS \E H \210
+# RI \E M \215
+# SS3 \E O \217
+# CSI \E [ \233
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+xterm-8bit|xterm terminal emulator 8-bit controls (X Window System):\
+ :am:bs:km:mi:ms:xn:\
+ :co#80:it#8:li#24:\
+ :AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
+ :K1=\217w:K2=\217y:K3=\217u:K4=\217q:K5=\217s:LE=\233%dD:\
+ :RI=\233%dC:UP=\233%dA:ae=\E(B:al=\233L:as=\E(0:bl=^G:\
+ :bt=\233Z:cd=\233J:ce=\233K:cl=\233H\2332J:\
+ :cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:ct=\2333g:\
+ :dc=\233P:dl=\233M:do=^J:ec=\233%dX:ei=\2334l:ho=\233H:\
+ :im=\2334h:\
+ :is=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8:\
+ :k1=\23311~:k2=\23312~:k3=\23313~:k4=\23314~:k5=\23315~:\
+ :k6=\23317~:k7=\23318~:k8=\23319~:k9=\23320~:kD=\2333~:\
+ :kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\217B:\
+ :ke=\233?1l\E>:kh=\2331~:kl=\217D:kr=\217C:ks=\233?1h\E=:\
+ :ku=\217A:le=^H:mb=\2335m:md=\2331m:me=\2330m:mr=\2337m:\
+ :nd=\233C:rc=\E8:sc=\E7:se=\23327m:sf=^J:so=\2337m:sr=\215:\
+ :st=\210:ta=^I:te=\233?1049l:ti=\233?1049h:ue=\23324m:\
+ :up=\233A:us=\2334m:vb=\233?5h\233?5l:\
+ :ve=\233?25l\233?25h:vi=\233?25l:vs=\233?12;25h:
+
+xterm-hp|xterm with hpterm function keys:\
+ :@7=\EF:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:\
+ :k8=\Ew:kC=\EJ:kD=\EP:kI=\EQ:kN=\ES:kP=\ET:kd=\EB:kh=\Eh:\
+ :kl=\ED:kr=\EC:ku=\EA:tc=xterm-basic:
+
+xterm-sco|xterm with SCO function keys:\
+ :@1=\E[E:@7=\E[F:F1=\E[W:F2=\E[X:F3=\E[Y:F4=\E[Z:F5=\E[a:\
+ :F6=\E[b:F7=\E[c:F8=\E[d:F9=\E[e:FA=\E[f:FB=\E[g:FC=\E[h:\
+ :FD=\E[i:FE=\E[j:FF=\E[k:FG=\E[l:FH=\E[m:FI=\E[n:FJ=\E[o:\
+ :FK=\E[p:FL=\E[q:FM=\E[r:FN=\E[s:FO=\E[t:FP=\E[u:FQ=\E[v:\
+ :FR=\E[w:FS=\E[x:FT=\E[y:FU=\E[z:FV=\E[@:FW=\E[[:FX=\E[\\:\
+ :FY=\E[]:FZ=\E[\136:Fa=\E[_:Fb=\E[`:Fc=\E[{:Km=\E[>M:\
+ :k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:\
+ :k8=\E[T:k9=\E[U:k;=\E[V:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:tc=xterm-basic:
+
+# The xterm-new description has all of the features, but is not completely
+# compatible with vt220. If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+# + maps the editing keypad
+# + interprets control-function-key as a second array of keys, so a
+# 12-fkey keyboard can support vt220's 20-fkeys.
+# + maps numeric keypad "+" to ",".
+# + uses DEC-style control sequences for the application keypad.
+#
+xterm-vt220|xterm emulating vt220:\
+ :@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
+ :F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
+ :FA=\E[34~:Km=\E[M:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:kN=\E[6~:\
+ :kP=\E[5~:kd=\EOB:kh=\E[1~:kl=\EOD:kr=\EOC:ku=\EOA:\
+ :tc=xterm+app:tc=xterm+edit:tc=xterm-basic:\
+ :tc=vt220+keypad:
+
+xterm-vt52|xterm emulating dec vt52:\
+ :co#80:it#8:li#24:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
+ :cr=^M:do=\EB:ho=\EH:kb=^H:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\
+ :le=\ED:nd=\EC:nw=^M^J:sf=^J:sr=\EI:ta=^I:up=\EA:
+
+xterm-noapp|xterm with cursor keys in normal mode:\
+ :ke=\E>:ks=\E=:te@:ti@:tc=xterm+noapp:tc=xterm:
+
+xterm-24|vs100|xterms|xterm terminal emulator (X Window System):\
+ :li#24:tc=xterm-old:
+
+# This is xterm for ncurses.
+xterm|xterm terminal emulator (X Window System):\
+ :tc=xterm-new:
+
+# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
+# setting the vt100Graphics resource to false.
+xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode:\
+ :U8#1:tc=xterm:
+
+# These entries allow access to the X titlebar and icon name as a status line.
+# Note that twm (and possibly window managers descended from it such as tvtwm,
+# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
+# with it.
+xterm+sl|access X title line and icon name:\
+ :hs:\
+ :ws#40:\
+ :ds=\E]0;\007:fs=^G:ts=\E]0;:tc=xterm:
+xterm+sl-twm|access X title line (pacify twm-descended window managers):\
+ :hs:\
+ :ws#40:\
+ :ds=\E]2;\007:fs=^G:ts=\E]2;:tc=xterm:
+
+#
+# The following xterm variants don't depend on your base version
+#
+# xterm with bold instead of underline
+xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold:\
+ :so=\E[7m:us=\E[1m:tc=xterm-old:
+
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+xterm-nic|xterm with ich/ich1 suppressed for non-curses programs:\
+ :IC@:ic@:tc=xterm:
+# From: Mark Sheppard <[email protected]>, 4 May 1996
+xterm1|xterm terminal emulator ignoring the alternate screen buffer:\
+ :te@:ti@:tc=xterm:
+
+#### KTERM
+# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
+# (kterm should not invoke DEC Graphics as the alternate character set
+# -- Kenji Rikitake)
+# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
+# -- MATSUMOTO Shoji)
+# kterm implements acsc via built-in table of X Drawable's
+kterm|kterm kanji terminal emulator (X window system):\
+ :es:hs:XT:\
+ :NC@:\
+ :Km=\E[M:RA=\E[?7l:SA=\E[?7h:\
+ :ac=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~:ae=\E(B:\
+ :as=\E(0:cs=\E[%i%d;%dr:ds=\E[?H:eA=:fs=\E[?F:me=\E[0m:\
+ :rc=\E8:sc=\E7:ts=\E[?E\E[?%i%dT:tc=xterm-r6:\
+ :tc=ecma+color:
+kterm-color|kterm-co|kterm with ANSI colors:\
+ :NC@:tc=kterm:tc=ecma+color:
+
+#### Other XTERM
+# These (xtermc and xtermm) are distributed with Solaris. They refer to a
+# variant of xterm which is apparently no longer supported, but are interesting
+# because they illustrate SVr4 curses mouse controls - T.Dickey
+xtermm|xterm terminal emulator (monocrome):\
+ :am:bs:km:mi:ms:xn:\
+ :BT#3:co#80:it#8:li#24:\
+ :@7=\E[Y:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\EOZ:\
+ :F2=\EOA:Gm=\E[%dY:IC=\E[%d@:Km=\E[^_:LE=\E[%dD:RI=\E[%dC:\
+ :RQ=\E[492Z:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cb=3\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
+ :ic=\E[@:im=:k0=\EOy:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
+ :k9=\EOX:k;=\EOY:kN=\E[U:kP=\E[V:kb=^H:kd=\EOB:kh=\E[H:\
+ :kl=\EOD:kr=\EOC:ku=\EOA:le=\E[D:mb@:md=\E[1m:me=\E[0m:\
+ :mr=\E[7m:nd=\E[C:\
+ :r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
+ :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=\E@0\E[?4r:\
+ :ti=\E@0\E[?4s\E[?4h\E@1:up=\E[A:tc=vt100+fnkeys:
+
+xtermc|xterm terminal emulator (color):\
+ :Co#8:NC#7:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[100m:tc=xtermm:
+
+# From: David J. MacKenzie <[email protected]> 20 Apr 1995
+# Here's a termcap entry I've been using for xterm_color, which comes
+# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
+# color stuff, I also have a status line defined as the window manager
+# title bar. [I have translated it to terminfo -- ESR]
+xterm-pcolor|xterm with color used for highlights and status line:\
+ :md=\E[1m\E[43m:mr=\E[7m\E[34m:so=\E[7m\E[31m:\
+ :us=\E[4m\E[42m:tc=xterm+sl:tc=xterm-r6:
+
+# This describes the capabilities of color_xterm, an xterm variant from
+# before ECMA-64 color support was folded into the main-line xterm release.
+# This entry is straight from color_xterm's maintainer.
+# From: Jacob Mandelson <[email protected]>, 09 Nov 1996
+# The README's with the distribution also say that it supports SGR 21, 24, 25
+# and 27, but they are not present in the terminfo or termcap.
+color_xterm|cx|cx100|color_xterm color terminal emulator for X:\
+ :am:bs:km:mi:ms:xn:XT:\
+ :NC@:co#80:it#8:li#65:\
+ :@7=\E[8~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
+ :RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:ho=\E[H:\
+ :i1=\E[r\E[m\E[?7h\E[?4;6l\E[4l:im=\E[4h:k1=\E[11~:\
+ :k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kI=\E[2~:\
+ :kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:kh=\E[7~:kl=\EOD:kr=\EOC:\
+ :ku=\EOA:le=^H:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\
+ :r1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<:\
+ :rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
+ :te=\E>\E[?41;1r:ti=\E[?1;41s\E[?1;41h\E=:ue=\E[24m:\
+ :up=\E[A:us=\E[4m:tc=ecma+color:tc=vt220+keypad:
+
+# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
+# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
+# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
+# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
+# that each of those implements the home, end, delete keys differently.
+#
+# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
+# colors; note that this is not compatible with the 5.2 version.
+# csw (2002-05-15): make xterm-color primary instead of nxterm, to
+# match XFree86's xterm.terminfo usage and prevent circular links
+xterm-color|nxterm|generic color xterm:\
+ :NC@:\
+ :op=\E[m:tc=xterm-r6:tc=klone+color:
+
+# This entry describes an xterm with Sun-style function keys enabled
+# via the X resource setting "xterm*sunFunctionKeys:true"
+# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
+# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
+# because we want it to be seen as <kcpy>.
+# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
+# with their Sun keyboard labels instead.
+# From: Simon J. Gerraty <[email protected]> 10 Jan 1996
+xterm-sun|xterm with sunFunctionKeys true:\
+ :%1=\E[196z:&8=\E[195z:@0=\E[200z:@5=\E[197z:@7=\E[220z:\
+ :@8=\EOM:F1=\E[192z:F2=\E[193z:F3=\E[194z:F4=\E[195z:\
+ :F5=\E[196z:F7=\E[198z:F8=\E[199z:F9=\E[200z:FA=\E[201z:\
+ :FL=\E[208z:FM=\E[209z:FN=\E[210z:FO=\E[211z:FP=\E[212z:\
+ :FQ=\E[213z:FS=\E[215z:FU=\E[217z:FW=\E[219z:FY=\E[221z:\
+ :FZ=\E[222z:Fa=\E[234z:Fb=\E[235z:K2=\E[218z:k1=\E[224z:\
+ :k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:k6=\E[229z:\
+ :k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:kD=\E[3z:\
+ :kI=\E[2z:kN=\E[222z:kP=\E[216z:kd=\EOB:kh=\E[214z:\
+ :kl=\EOD:kr=\EOC:ku=\EOA:tc=xterm-basic:
+xterms-sun|small (80x24) xterm with sunFunctionKeys true:\
+ :co#80:li#24:tc=xterm-sun:
+
+#### GNOME (VTE)
+# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
+gnome-rh62|Gnome terminal:\
+ :ut:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kD=\177:tc=xterm-color:
+
+# GNOME Terminal 1.4.0.4 (Redhat 7.2)
+#
+# This implements a subset of vt102 with a random selection of features from
+# other terminals such as color and function-keys.
+#
+# shift-f1 to shift-f10 are f11 to f20
+#
+# NumLock changes the application keypad to approximate vt100 keypad, except
+# that there is no escape sequence matching comma (,).
+#
+# Other defects observed:
+# vt100 LNM mode is not implemented.
+# vt100 80/132 column mode is not implemented.
+# vt100 DECALN is not implemented.
+# vt100 DECSCNM mode is not implemented, so flash does not work.
+# vt100 TBC (tab reset) is not implemented.
+# xterm alternate screen controls do not restore cursor position properly
+# it hangs in tack after running function-keys test.
+gnome-rh72|GNOME Terminal:\
+ :km@:ut:\
+ :RA=\E[?7l:SA=\E[?7h:ct@:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kD=\E[3~:me=\E[0m\017:ve=\E[?25h:vi=\E[?25l:\
+ :tc=xterm-color:
+
+# GNOME Terminal 2.0.1 (Redhat 8.0)
+#
+# Documentation now claims it implements vt220 (which is demonstrably false).
+# However, it does implement ECH, which is a vt220 feature. And there are
+# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
+# more of its bugs using vttest.
+#
+# However, note that bce and msgr are broken in this release. Tabs (tbc and
+# hts) are broken as well. Sometimes flash (as in xterm-new) works.
+#
+# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
+# operations. Shift-tab generates a distinct sequence so it can be argued
+# that it implements kcbt.
+gnome-rh80|GNOME Terminal:\
+ :ms@:ut@:\
+ :ec=\E[%dX:kB=\E^I:kb=\177:op=\E[39;49m:vb=\E[?5h\E[?5l:\
+ :tc=gnome-rh72:
+
+# GNOME Terminal 2.2.1 (Redhat 9.0)
+#
+# bce and msgr are repaired.
+gnome-rh90|GNOME Terminal:\
+ :ms:ut:\
+ :#4=\EO2D:%i=\EO2C:*4=\E[3;2~:@7=\EOF:K2=\E[E:ch=\E[%i%dG:\
+ :ct=\E[3g:cv=\E[%i%dd:kB=\E[Z:kh=\EOH:tc=xterm+pcf0:\
+ :tc=xterm+pcfkeys:tc=gnome-rh80:
+
+# GNOME Terminal 2.14.2 (Fedora Core 5)
+# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
+gnome-fc5|GNOME Terminal:\
+ :r1=\Ec:\
+ :r2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
+ :tc=ansi+enq:tc=xterm+pcc0:tc=gnome-rh90:
+
+# GNOME Terminal 2.18.1 (2007 snapshot)
+#
+# For any "recent" version of gnome-terminal, it is futile to attempt to
+# support modifiers on cursor- and keypad keys because the program usually
+# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
+# of the keys (which more/less correspond to the termcap values), and will
+# interpret those according to the $TERM value, but others not in the
+# terminfo according to some constantly changing set of hacker guidelines -TD
+vte-2007|VTE in GNOME Terminal snapshot 2.18.1:\
+ :tc=xterm+pcc2:tc=gnome-fc5:
+gnome-2007|GNOME Terminal snapshot 2.18.1:\
+ :tc=vte-2007:
+
+# GNOME Terminal 2.22.3 (2008 snapshot)
+#
+# In vttest, it claims to be a vt220 with national replacement character-sets,
+# but aside from the identifier string, implements only a small fraction of
+# vt220's behavior, which will make it less usable on a VMS system (unclear
+# what the intent of the developer is, since the NRC feature exposed in vttest
+# by this change does not work).
+vte-2008|VTE in GNOME Terminal snapshot 2.22.3:\
+ :tc=vte+pcfkeys:tc=vte-2007:
+gnome-2008|GNOME Terminal snapshot 2.22.3:\
+ :tc=vte-2008:
+
+# GNOME terminal may automatically use the contents of the "xterm" terminfo to
+# supply key information which is not built into the program. With 2.22.3,
+# this list is built into the program (which addresses the inadvertant use of
+# random terminfo data, though using a set of values which does not correspond
+# to any that xterm produces - still not solving the problem that GNOME
+# terminal hardcodes the $TERM variable as "xterm").
+#
+# terminfo modifier code keys
+# kf13-kf24 shift 2 F1 to F12
+# kf25-kf36 control 5 F1 to F12
+# kf37-kf48 shift/control 6 F1 to F12
+# kf49-kf60 alt 3 F1 to F12
+# kf61-kf63 shift-alt 4 F1 to F3
+#
+# The parameters with \EO (SS3) are technically an error, since SS3 should have
+# no parameters. This appears to be rote copying based on xterm+pcc0.
+vte+pcfkeys|VTE's variation on xterm+pcfkeys:\
+ :F3=\EO1;2P:F4=\EO1;2Q:F5=\EO1;2R:F6=\EO1;2S:FF=\EO1;5P:\
+ :FG=\EO1;5Q:FH=\EO1;5R:FI=\EO1;5S:FR=\EO1;6P:FS=\EO1;6Q:\
+ :FT=\EO1;6R:FU=\EO1;6S:Fd=\EO1;3P:Fe=\EO1;3Q:Ff=\EO1;3R:\
+ :Fg=\EO1;3S:Fp=\EO1;4P:Fq=\EO1;4Q:Fr=\EO1;4R:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:tc=xterm+pcfkeys:
+gnome+pcfkeys|VTE's variation on xterm+pcfkeys:\
+ :tc=vte+pcfkeys:
+
+vte|VTE aka GNOME Terminal:\
+ :tc=vte-2008:
+gnome|GNOME Terminal:\
+ :tc=vte:
+
+# palette is hardcoded...
+vte-256color|VTE with xterm 256-colors:\
+ :Ic@:tc=xterm+256color:tc=vte:
+gnome-256color|GNOME Terminal with xterm 256-colors:\
+ :tc=vte-256color:
+
+# XFCE Terminal 0.2.5.4beta2
+#
+# This is based on some of the same source code, e.g., the VTE library, as
+# gnome-terminal, but has fewer features, fails more screens in vttest.
+# Since most of the terminfo-related behavior is due to the VTE library,
+# the terminfo is the same as gnome-terminal.
+xfce|Xfce Terminal:\
+ :tc=vte:
+
+#### Other GNOME
+# Multi-Gnome-Terminal 1.6.2
+#
+# This does not use VTE, and does have different behavior (compare xfce and
+# gnome).
+mgt|Multi GNOME Terminal:\
+ :SF=\E[%dS:SR=\E[%dT:tc=xterm-xf86-v333:
+
+#### KDE
+# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
+# or not is debatable).
+kvt|KDE terminal:\
+ :km@:ut:\
+ :@7=\E[F:kD=\177:kh=\E[H:tc=xterm-color:
+
+# Konsole 1.0.1
+# (formerly known as kvt)
+#
+# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
+# simplify this entry (and point out why konsole isn't xterm), we base this on
+# xterm-r6. The default keyboard appears to be 'linux'.
+#
+# Notes:
+# a) konsole implements several features from XFree86 xterm, though none of
+# that is documented - except of course in its source code - apparently
+# because its implementors are unaccustomed to reading documentation - as
+# evidenced by the sparse and poorly edited documentation distributed with
+# konsole. Some features such as the 1049 private mode are recognized but
+# incorrectly implemented as a duplicate of the 47 private mode.
+# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
+# sends PC-style escapes rather than vt100.
+# c) fails vttest menu 3 (Test of character sets) because it does not properly
+# parse some control sequences. Also fails vttest Primary Device Attributes
+# by sending a bogus code (in the source it says it's supposed to be a
+# vt220, which is doubly incorrect because it does not implement vt220
+# control sequences except for a few special cases). Treat it as a
+# mildly-broken vt102.
+#
+# Update for konsole 1.3.2:
+# The 1049 private mode works (but see the other xterm screens in vttest).
+# Primary Device Attributes now returns the code for a vt100 with advanced
+# video option. Perhaps that's intended to be a "mildly-broken vt102".
+#
+# Updated for konsole 1.6.4:
+# add konsole-solaris
+#
+# Updated for konsole 1.6.6:
+# add control-key modifiers for function-keys, etc.
+#
+# vttest menu 1 shows that both konsole and gnome terminal do wrapping
+# different from xterm (and vt100's). They have the same behavior in this
+# detail, but it is unclear which copies the other.
+konsole-base|KDE console window:\
+ :NP:km@:ut:XT:\
+ :NC@:\
+ :*6@:@0@:@7=\E[4~:F1@:F2@:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:\
+ :RA=\E[?7l:SA=\E[?7h:SF=\E[%dS:SR=\E[%dT:bl@:ch=\E[%i%dG:\
+ :cv=\E[%i%dd:ec=\E[%dX:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:k;@:\
+ :kD@:kb=\177:kh=\E[1~:mb=\E[5m:me=\E[0m\017:\
+ :rs=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
+ :se=\E[27m:ue=\E[24m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
+ :vi=\E[?25l:tc=ecma+color:tc=xterm-r6:
+konsole-linux|KDE console window with linux keyboard:\
+ :F1=\E[23~:F2=\E[24~:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:k1=\E[[A:\
+ :k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:tc=konsole-base:
+konsole-solaris|KDE console window with Solaris keyboard:\
+ :@7=\E[4~:kb=^H:kh=\E[1~:tc=konsole-vt100:
+# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
+# than testing the code.
+konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm:\
+ :@7=\E[4~:kh=\E[1~:tc=konsole-vt100:
+# The value for kbs reflects local customization rather than the settings used
+# for XFree86 xterm.
+konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm:\
+ :@7=\EOF:kh=\EOH:tc=konsole+pcfkeys:tc=konsole-vt100:
+# Konsole does not implement shifted cursor-keys.
+konsole+pcfkeys|konsole subset of xterm+pcfkeys:\
+ :#4@:%i@:kB=\E[Z:kF@:kR@:tc=xterm+pcc2:tc=xterm+pcf0:
+# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
+# it is still useful for deriving the other entries.
+konsole-vt100|KDE console window with vt100 (sic) keyboard:\
+ :@7=\E[F:F1=\E[23~:F2=\E[24~:F3@:F4@:F5@:F6@:F7@:F8@:F9@:FA@:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
+ :kD=\E[3~:kb=\177:kh=\E[H:tc=konsole-base:
+konsole-vt420pc|KDE console window with vt420 pc keyboard:\
+ :kD=\177:kb=^H:tc=konsole-vt100:
+konsole-16color|klone of xterm-16color:\
+ :NC#32:tc=ibm+16color:tc=konsole:
+# make a default entry for konsole
+konsole|KDE console window:\
+ :tc=konsole-xf4x:
+
+# palette is hardcoded...
+konsole-256color|KDE console window with xterm 256-colors:\
+ :Ic@:tc=xterm+256color:tc=konsole:
+
+#### MLTERM
+# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
+#
+# It is nominally a vt102 emulator, with features borrowed from rxvt and
+# xterm.
+#
+# The function keys are numbered based on shift/control/alt modifiers, except
+# that the control-modifier itself is used to spawn a new copy of mlterm (the
+# "-P" option). So control/F1 to control/F12 may not be usable, depending on
+# how it is configured.
+#
+# kf1 to kf12 \E[11~ to \E[24~
+# shift kf1 to kf12 \E[11;2~ to \E[24;2~
+# alt kf1 to kf12 \E[11;3~ to \E[24;3~
+# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
+# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
+# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
+# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
+# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+mlterm|multi lingual terminal emulator:\
+ :am:es:km:mi:ms:xn:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
+ :ic=\E[@:im=\E[4h:\
+ :is=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
+ :kh=\EOH:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
+ :rs=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l:\
+ :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :ve=\E[?25h:vi=\E[?25l:tc=mlterm+pcfkeys:tc=xterm+r6f2:
+
+# The insert/delete/home/end keys do not respond to modifiers because mlterm
+# looks in its termcap to decide which string to send. If it used terminfo
+# (when available), it could use the extended names introduced for xterm.
+mlterm+pcfkeys|fragment for PC-style fkeys:\
+ :#4=\EO1;2D:%c=\E[6;2~:%e=\E[5;2~:%i=\EO1;2C:
+
+mlterm-256color|mlterm 3.0 with xterm 256-colors:\
+ :tc=xterm+256color:tc=rxvt:
+
+#### RXVT
+# From: Thomas Dickey <[email protected]> 04 Oct 1997
+# Updated: Oezguer Kesim <[email protected]> 02 Nov 1997
+# Notes:
+# rxvt 2.21b uses
+# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
+# but some applications don't work with that.
+# It also has an AIX extension
+# box2=lqkxjmwuvtn,
+# and
+# ech=\E[%p1%dX,
+# but the latter does not work correctly.
+#
+# The distributed terminfo says it implements hpa and vpa, but they are not
+# implemented correctly, using relative rather than absolute positioning.
+#
+# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
+# Since rxvt is not really compatible with xterm, it should be configured as
+# "rxvt" or "rxvt-color".
+#
+# removed dch/dch1 because they are inconsistent with bce/ech -TD
+# remove km as per tack test -TD
+rxvt-basic|rxvt terminal base (X Window System):\
+ :am:bs:eo:mi:ms:ut:xn:xo:XT:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:Km=\E[M:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:ho=\E[H:\
+ :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
+ :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:kB=\E[Z:\
+ :kb=^H:ke=\E>:ks=\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mr=\E[7m:nd=\E[C:\
+ :r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
+ :r2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
+ :rc=\E8:s0=\E(B:s1=\E(0:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:\
+ :sr=\EM:st=\EH:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
+ :ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
+ :vi=\E[?25l:tc=vt100+enq:tc=rxvt+pcfkeys:\
+ :tc=vt220+keypad:
+# Key Codes from rxvt reference:
+#
+# Note: Shift + F1-F10 generates F11-F20
+#
+# For the keypad, use Shift to temporarily override Application-Keypad
+# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
+# is off, escape sequences toggle Application-Keypad setting.
+# Also note that values of Home, End, Delete may have been compiled
+# differently on your system.
+#
+# Normal Shift Control Ctrl+Shift
+# Tab ^I ESC [ Z ^I ESC [ Z
+# BackSpace ^H ^? ^? ^?
+# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
+# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
+# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
+# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
+# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
+# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
+# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
+# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
+# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
+# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
+# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
+# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
+# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
+# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
+# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
+# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
+# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
+# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
+# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
+# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
+# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
+# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
+# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
+# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
+# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
+# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
+# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
+# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
+# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
+#
+# Application
+# Up ESC [ A ESC [ a ESC O a ESC O A
+# Down ESC [ B ESC [ b ESC O b ESC O B
+# Right ESC [ C ESC [ c ESC O c ESC O C
+# Left ESC [ D ESC [ d ESC O d ESC O D
+# KP_Enter ^M ESC O M
+# KP_F1 ESC O P ESC O P
+# KP_F2 ESC O Q ESC O Q
+# KP_F3 ESC O R ESC O R
+# KP_F4 ESC O S ESC O S
+# XK_KP_Multiply * ESC O j
+# XK_KP_Add + ESC O k
+# XK_KP_Separator , ESC O l
+# XK_KP_Subtract - ESC O m
+# XK_KP_Decimal . ESC O n
+# XK_KP_Divide / ESC O o
+# XK_KP_0 0 ESC O p
+# XK_KP_1 1 ESC O q
+# XK_KP_2 2 ESC O r
+# XK_KP_3 3 ESC O s
+# XK_KP_4 4 ESC O t
+# XK_KP_5 5 ESC O u
+# XK_KP_6 6 ESC O v
+# XK_KP_7 7 ESC O w
+# XK_KP_8 8 ESC O x
+# XK_KP_9 9 ESC O y
+#
+# The source-code for rxvt actually defines mappings for F21-F35, using
+# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
+# are rare, so this entry uses the shift- and control-modifiers as in
+# xterm+pcfkeys to define keys past F12.
+#
+# kIC is normally not used, since rxvt performs a paste for that (shifted
+# insert), unless private mode 35 is set.
+#
+# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
+# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
+rxvt+pcfkeys|fragment for PC-style fkeys:\
+ :#2=\E[7$:#3=\E[2$:#4=\E[d:%c=\E[6$:%e=\E[5$:%i=\E[c:\
+ :*4=\E[3$:*6=\E[4~:*7=\E[8$:@0=\E[1~:@7=\E[8~:F1=\E[23~:\
+ :F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
+ :F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:FB=\E[23$:\
+ :FC=\E[24$:FD=\E[11\136:FE=\E[12\136:FF=\E[13\136:\
+ :FG=\E[14\136:FH=\E[15\136:FI=\E[17\136:FJ=\E[18\136:\
+ :FK=\E[19\136:FL=\E[20\136:FM=\E[21\136:FN=\E[23\136:\
+ :FO=\E[24\136:FP=\E[25\136:FQ=\E[26\136:FR=\E[28\136:\
+ :FS=\E[29\136:FT=\E[31\136:FU=\E[32\136:FV=\E[33\136:\
+ :FW=\E[34\136:FX=\E[23@:FY=\E[24@:k1=\E[11~:k2=\E[12~:\
+ :k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kE=\E[8\136:\
+ :kF=\E[a:kI=\E[2~:kN=\E[6~:kP=\E[5~:kR=\E[b:kd=\E[B:\
+ :kh=\E[7~:kl=\E[D:kr=\E[C:ku=\E[A:
+
+rxvt|rxvt terminal emulator (X Window System):\
+ :NC@:\
+ :ch=\E[%i%dG:cv=\E[%i%dd:k0=\E[21~:me=\E[m\017:\
+ :tc=rxvt-basic:tc=ecma+color:
+rxvt-color|rxvt terminal emulator (X Window System):\
+ :tc=rxvt:
+rxvt-256color|rxvt 2.7.9 with xterm 256-colors:\
+ :tc=xterm+256color:tc=rxvt:
+rxvt-88color|rxvt 2.7.9 with xterm 88-colors:\
+ :tc=xterm+88color:tc=rxvt:
+rxvt-xpm|rxvt terminal emulator (X Window System):\
+ :tc=rxvt:
+rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin:\
+ :ac=+\257,\256-\1360\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :tc=rxvt:
+rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin:\
+ :ac=+\257,\256-\1360\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376:\
+ :tc=rxvt-cygwin:
+
+# This variant is supposed to work with rxvt 2.7.7 when compiled with
+# NO_BRIGHTCOLOR defined. rxvt needs more work...
+rxvt-16color|xterm with 16 colors like aixterm:\
+ :NC#32:tc=ibm+16color:tc=rxvt:
+
+#### MRXVT
+# mrxvt 0.5.4
+#
+# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
+# makes its function-keys different from other flavors of rxvt -TD
+mrxvt|multitabbed rxvt:\
+ :XT:\
+ :#2=\E[7;2~:*7=\E[8;2~:@7=\E[8~:kd=\E[B:kh=\E[7~:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:tc=xterm+r6f2:tc=xterm+pcfkeys:tc=rxvt:
+
+mrxvt-256color|multitabbed rxvt with 256 colors:\
+ :tc=xterm+256color:tc=mrxvt:
+
+#### ETERM
+# From: Michael Jennings <[email protected]>
+#
+# Eterm 0.9.3
+#
+# removed kf0 which conflicts with kf10 -TD
+# remove cvvis which conflicts with cnorm -TD
+# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
+# but does otherwise follow the rxvt+pcfkeys model -TD
+# remove nonworking flash -TD
+# remove km as per tack test -TD
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+Eterm|Eterm-color|Eterm with xterm-style color support (X Window System):\
+ :5i:am:bw:eo:mi:ms:ut:xn:xo:XT:\
+ :BT#5:NC@:co#80:it#8:li#24:lm#0:\
+ :%1=\E[28~:%c@:%e@:@1=\EOu:@8=\EOM:AL=\E[%dL:DC=\E[%dP:\
+ :DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:K1=\E[7~:K2=\EOu:K3=\E[5~:\
+ :K4=\E[8~:K5=\E[6~:Km=\E[M:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:\
+ :SA=\E[?7h:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:\
+ :cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:\
+ :dl=\E[M:do=\E[B:eA=\E)0:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
+ :i1=\E[?47l\E>\E[?1l:ic=\E[@:im=\E[4h:\
+ :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:kb=^H:ke=:\
+ :ks=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\
+ :pf=\E[4i:po=\E[5i:\
+ :r1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H:\
+ :r2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h:\
+ :rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:ve=\E[?25h:vi=\E[?25l:tc=vt100+enq:\
+ :tc=rxvt+pcfkeys:tc=ecma+color:
+
+Eterm-256color|Eterm with xterm 256-colors:\
+ :tc=xterm+256color:tc=Eterm:
+
+Eterm-88color|Eterm with 88 colors:\
+ :tc=xterm+88color:tc=Eterm:
+
+#### ATERM
+# Based on rxvt 2.4.8, it has a few differences in key bindings
+aterm|AfterStep terminal:\
+ :XT:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=\177:tc=rxvt:
+
+#### XITERM
+# xiterm 0.5-5.2
+# This is not based on xterm's source...
+# vttest shows several problems with keyboard, cursor-movements.
+# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
+xiterm|internationalized terminal emulator for X:\
+ :km@:\
+ :kD=\E[3~:kb=\177:tc=klone+color:tc=xterm-r6:
+
+
+#### HPTERM
+# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
+# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
+# chars look like --esr)
+hpterm|X-hpterm|hp X11 terminal emulator:\
+ :am:da:db:mi:xs:\
+ :Nl#8:co#80:lh#2:li#24:lm#0:lw#8:pb#9600:sg#0:ug#0:\
+ :LF=\E&j@:LO=\E&jB:ac=:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:\
+ :cd=1\EJ:ce=\EK:ch=\E&a%dC:cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:\
+ :cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:\
+ :k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:\
+ :kA=\EL:kC=\EJ:kD=\EP:kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:\
+ :kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:\
+ :kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:\
+ :ku=\EA:le=^H:md=\E&dB:me=\E&d@:mh=\E&dH:ml=\El:mr=\E&dB:\
+ :mu=\Em:nd=\EC:se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:st=\E1:ta=^I:\
+ :ue=\E&d@:up=\EA:us=\E&dD:
+# HPUX 11 provides a color version.
+hpterm-color|HP X11 terminal emulator with color:\
+ :cc:\
+ :Co#64:pa#8:\
+ :ho=\E&a0y0C:op=\E&v0S:sp=\E&v%dS:tc=hpterm:
+
+#### EMU
+# This is for the extensible terminal emulator on the X11R6 contrib tape.
+# It corresponds to emu's internal emulation:
+# emu -term emu
+# emu's default sets TERM to "xterm", but that doesn't work well -TD
+# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
+# fixes: add civis, cnorm, sgr -TD
+emu|emu native mode:\
+ :am:mi:ms:ut:xo:\
+ :Co#15:co#80:it#8:li#24:pa#64:vt#200:\
+ :*6=\Esel:@0=\Efind:@8=^M:AB=\Es%i%d;:AF=\Er%i%d;:\
+ :AL=\EQ%d;:DC=\EI%d;:DL=\ER%d;:DO=\Ep%d;:F1=\EF11:\
+ :F2=\EF12:F3=\EF13:F4=\EF14:F5=\EF15:F6=\EF16:F7=\EF17:\
+ :F8=\EF18:F9=\EF19:FA=\EF20:LE=\Eq-%d;:RI=\Eq%d;:\
+ :UP=\Ep-%d;:\
+ :ac=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244:\
+ :al=\EQ1;:bl=^G:cb=\EL:cd=\EN:ce=\EK:cl=\EP\EE0;0;:\
+ :cm=\EE%d;%d;:cr=^M:cs=\Ek%d;%d;:ct=\Ej:dc=\EI1;:dl=\ER1;:\
+ :do=\EB:ec=\Ej%d;:ei=\EX:ho=\EE0;0;:im=\EY:\
+ :is=\ES\Er0;\Es0;:k0=\EF00:k1=\EF01:k2=\EF02:k3=\EF03:\
+ :k4=\EF04:k5=\EF05:k6=\EF06:k7=\EF07:k8=\EF08:k9=\EF09:\
+ :k;=\EF10:kD=\177:kI=\Eins:kN=\Enext:kP=\Eprior:kb=^H:\
+ :kd=\EB:kl=\EC:kr=\ED:ku=\EA:le=^H:mb=\EW:md=\EU:me=\ES:\
+ :mr=\ET:nd=\EC:op=\Es0;\Er0;:rs=\ES\Es0;\Er0;:se=\ES:\
+ :sf=\EG:so=\ET:sr=\EF:st=\Eh:ta=^I:ue=\ES:up=\EA:us=\EV:\
+ :ve=\Ea:vi=\EZ:
+
+# vt220 Terminfo entry for the Emu emulation, corresponds to
+# emu -term vt220
+# with NumLock set (to make the keypad transmit kf0-kf9).
+# fixes: add am, xenl, corrected sgr0 -TD
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+emu-220|Emu-220 (vt200-7bit mode):\
+ :am:xn:xo:\
+ :co#80:it#8:li#24:vt#200:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[1L:as=^N:bl=^G:cd=\E[0J:\
+ :ce=\E[0K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[1B:\
+ :ho=\E[H:if=/usr/share/tabset/vt300:\
+ :is=\E>\E[?1l\E[?3l\E[4l\E[?7h:k0=\EOp:k1=\EOq:k2=\EOr:\
+ :k3=\EOs:k4=\EOt:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:k9=\EOy:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:\
+ :kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=\E[1D:mb=\E[0;5m:\
+ :md=\E[0;1m:me=\E[0m:mr=\E[0;7m:nd=\E[1C:rc=\E8:\
+ :rs=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h:sc=\E7:se=\E[m:\
+ :sf=\ED:so=\E[0;7m:sr=\EM:st=\EH:ta=^I:te=\E>:ti=\E[?1l\E=:\
+ :ue=\E[m:up=\E[1A:us=\E[0;4m:ve=\E[?25h:vi=\E[?25l:
+
+#### MVTERM
+# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
+# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
+# indicate that it emulates more than one terminal, but incompletely.
+#
+# This is adapted from a FreeBSD bug-report by Daniel Rudy <[email protected]>
+# It is based on vt102's entry, with some subtle differences, but also
+# has status line
+# supports ANSI colors (except for 'op' string)
+# apparently implements alternate screen like xterm
+# does not use padding, of course.
+mvterm|vv100|SwitchTerm aka mvTERM:\
+ :am:es:hs:km:mi:ms:xn:\
+ :Co#8:co#80:it#8:li#24:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
+ :DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cb=3\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ds=\E[?E:eA=\E(B\E)0:ei=:\
+ :fs=\E[?F:ho=\E[H:ic=\E[@:im=:k0=\EOy:k5=\EOt:k6=\EOu:\
+ :k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:op=\E[100m:\
+ :rc=\E8:\
+ :rs=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H:\
+ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:ts=\E[?E\E[?%i%dT:\
+ :ue=\E[m:up=\E[A:us=\E[4m:tc=vt100+fnkeys:
+
+#### MTERM
+#
+# This application is available by email from <[email protected]>.
+#
+# "mterm -type ansi" sets $TERM to "ansi"
+mterm-ansi|ANSI emulation:\
+ :am:bw:mi:ms:\
+ :it#8:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%d`:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=:im=\E[4h:\
+ :is=\E)0\017:kb=^H:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:se=\E[27m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:
+# mterm normally sets $TERM to "mterm"
+mterm|mouse-sun|Der Mouse term:\
+ :am:bw:mi:\
+ :it#8:\
+ :al=^A:bl=^G:cd=^B:ce=^C:cl=^L:cm=\006%d.%d.:cr=^M:dc=^Y:\
+ :dl=^K:do=^N:ei=^O:ho=^P:im=^Q:kb=^H:le=^H:ll=^R:nd=^S:\
+ :nw=^M^U:se=^T:sf=^U:so=^V:sr=^W:ta=^I:up=^X:
+# "mterm -type decansi" sets $TERM to "decansi"
+#
+# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+decansi|ANSI emulation with DEC compatibility hacks:\
+ :am:mi:ms:xn:\
+ :it#8:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\
+ :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ec=\E[%dX:\
+ :ei=\E[4l:ho=\E[H:ic=:im=\E[4h:is=\E)0\E[r\017:k1=\E[11~:\
+ :k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
+ :kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:sc=\E7:se=\E[27m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :ve=\E[?25h:vi=\E[?25l:
+
+#### VWM
+#
+# vwmterm is a terminal emulator written for the VWM console window manager
+#
+vwmterm|(vwm term):\
+ :NP:am:cc:mi:ms:ut:xn:xo:\
+ :Co#8:pa#64:\
+ :@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:DO=\E[%dB:F1=\E[22~:\
+ :F2=\E[23~:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:do=\E[B:ho=\E[H:\
+ :k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
+ :kN=\E[6~:kP=\E[5~:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:\
+ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:\
+ :mk=\E[8m:mr=\E[7m:nd=\E[C:r1=\E[H\E[J\E[m\Ec:sf=^J:\
+ :so=\E[3m:te=\E[?1049l:ti=\E[?1049h:up=\E[A:us=\E[4m:\
+ :ve=\E[?25h:vi=\E[?25l:vs=\E[?25h:
+
+#### MGR
+#
+# MGR is a Bell Labs window system lighter-weight than X.
+# These entries describe MGR's xterm-equivalent.
+# They are courtesy of Vincent Broman <[email protected]> 14 Jan 1997
+#
+
+mgr|Bellcore MGR (non X) window system terminal emulation:\
+ :am:km:\
+ :AL=3*\E%da:DC=5\E%dE:DL=3*\E%dd:IC=5\E%dA:RA=\E5S:\
+ :SA=\E5s:al=3\Ea:bl=^G:cd=\EC:ce=\Ec:cl=^L:cm=\E%r%d;%dM:\
+ :cr=^M:cs=\E%d;%dt:dc=\EE:dl=3\Ed:do=\Ef:ei=:hd=\E1;2f:\
+ :hu=\E1;2u:ic=\EA:im=:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:md=\E2n:me=\E0n:mr=\E1n:nd=\Er:nw=^M^J:se=\E0n:sf=^J:\
+ :so=\E1n:ta=^I:ue=\E0n:up=\Eu:us=\E4n:ve=\Eh:vi=\E9h:\
+ :vs=\E0h:
+mgr-sun|Mgr window with Sun keyboard:\
+ :%1=\E[207z:%6=\E[198z:&8=\E[195z:@0=\E[200z:@5=\E[197z:\
+ :@7=\E[220z:@8=\E[250z:F1=\E[234z:F2=\E[235z:K1=\E[214z:\
+ :K2=\E[218z:K3=\E[216z:K4=\E[220z:K5=\E[222z:k1=\E[224z:\
+ :k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:k6=\E[229z:\
+ :k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:kN=\E[222z:\
+ :kP=\E[216z:kh=\E[214z:tc=mgr:
+mgr-linux|Mgr window with Linux keyboard:\
+ :@7=\E[4~:F1=\E[23~:F2=\E[24~:K1=\E[H:K2=\E[G:K3=\E[5~:\
+ :K4=\E[Y:K5=\E[6~:k0=\E[[J:k1=\E[[A:k2=\E[[B:k3=\E[[C:\
+ :k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:k;=\E[21~:kD=\E[3~:kN=\E[6~:kP=\E[5~:kh=\E[1~:\
+ :tc=mgr:
+
+#### SIMPLETERM
+# st.suckless.org
+# st-0.1.1
+#
+# Note: the original terminfo description uses leading blank to persuade
+# ncurses to use "st" as its name. Proper fix for that is to use "st" as an
+# alias.
+#
+# Reading the code shows it should work for aixterm 16-colors
+# - added st-16color
+#
+# Using tack:
+# - set eo (erase-overstrike)
+# - set xenl
+# - tbc doesn't work
+# - hts works
+# - cbt doesn't work
+# - shifted cursor-keys send sequences like rxvt
+# - sgr referred to unimplemented "invis" mode.
+# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
+simpleterm|st| simpleterm:\
+ :am:eo:mi:ms:ul:xn:\
+ :Co#8:NC#3:co#80:it#8:li#24:pa#64:\
+ :@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DO=\E[%dB:\
+ :F1=\E[23~:F2=\E[24~:IC=\E[%d@:RI=\E[%dC:SF=\E[%dS:\
+ :UP=\E[%dA:\
+ :ac=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:im=:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:k;=\E[21~:kD=\E[3~:kN=\E[6~:kP=\E[5~:kb=\177:\
+ :kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[1m:\
+ :me=\E[0m:mr=\E[7m:nd=\E[C:op=\E[37;40m:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
+ :ve=\E[?12l\E[?25h:vi=\E[?25l:
+st-16color|simpleterm with 16-colors:\
+ :tc=ibm+16color:tc=simpleterm:
+# 256 colors "works", but when running xterm's test-scripts, some garbage is
+# shown in the titlebar.
+st-256color|simpleterm with 256 colors:\
+ :cc@:\
+ :Ic@:tc=simpleterm:tc=xterm+256color:
+
+### TERMINATOR
+# http://software.jessies.org/terminator/
+# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
+# Debian/current -TD (2011/8/20)
+#
+# There are some packaging problems:
+# a) using Java, the program starts off using 50Mb, and climbs from there,
+# up to 114Mb after testing (no scrollback).
+# b) it insists on reinstalling its terminal description in $HOME/.terminfo
+# (two copies, just in case the host happens to be Mac OS X).
+# I deleted this after testing with tack.
+#
+# Issues/features found with tack:
+# a) tbc does not work (implying that hts also is broken).
+# Comparing with the tabs utility shows a problem with the last tabstop on
+# a line.
+# b) has xterm-style shifted function-key strings
+# meta also is used, but control is ignored.
+# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
+# d) some combinations of shift/control send xterm-style sequences for
+# insert/delete/home/end.
+# e) numeric keypad sends only numbers (compare with vttest).
+# f) meta mode (km) is not implemented.
+#
+# Issues found with ncurses test-program:
+# a) bce is inconsistently implemented
+# b) widths of Unicode values above 256 do not always agree with wcwidth.
+#
+# Checked with vttest, found low degree of compatibility there.
+#
+# Checked with xterm's scripts, found that the 256-color palette is fixed.
+#
+# Fixes:
+# a) add sgr string
+# b) corrected sgr0 to reset alternate character set
+# c) modified smacs/rmacs to use SCS rather than SI/SO
+# d) removed bce
+# e) removed km
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+terminator|Terminator no line wrap:\
+ :eo:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:lm#0:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :ds=\E]2;\007:ei=\E[4l:fs=^G:ho=\E[H:i1=\E[?47l\E=\E[?1l:\
+ :im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[15~:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
+ :kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
+ :se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[?47l\E8:ti=\E7\E[?47h:ts=\E]2;:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:vb=^G:ve=\E[?25h:vi=\E[?25l:
+
+######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
+#
+
+# Columbus UNIX virtual terminal. This terminal also appears in
+# UNIX 4.0 and successors as line discipline 1 (?), but is
+# undocumented and does not really work quite right.
+cbunix|cb unix virtual terminal:\
+ :am:bs:da:db:\
+ :co#80:li#24:lm#0:\
+ :al=\EP:bl=^G:cd=\EL:ce=\EK:cl=\EL:cm=\EG%r%.%.:cr=^M:\
+ :dc=\EM:dl=\EN:do=^J:ei=:ic=\EO:im=:kd=\EB:kh=\EE:kl=\ED:\
+ :kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eb^D:sf=^J:so=\Ea^D:\
+ :ue=\Eb^A:up=\EA:us=\Ea^A:
+# (vremote: removed obsolete ":nl@:" -- esr)
+vremote|virtual remote terminal:\
+ :am@:\
+ :co#79:tc=cbunix:
+
+pty|4bsd pseudo teletype:\
+ :cm=\EG%+ %+ :se=\Eb$:so=\Ea$:ue=\Eb!:us=\Ea!:tc=cbunix:
+
+# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
+eterm|gnu emacs term.el terminal emulation:\
+ :am:mi:xn:\
+ :co#80:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:\
+ :cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
+ :im=\E[4h:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:se=\E[m:\
+ :sf=^J:so=\E[7m:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+
+# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
+eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96:\
+ :am:mi:ms:xn:\
+ :Co#8:co#80:li#24:pa#64:\
+ :@7=\E[4~:AB=\E[%+(m:AF=\E[%+^^m:AL=\E[%dL:DC=\E[%dP:\
+ :DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:al=\E[L:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:\
+ :dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:kD=\E[3~:kI=\E[2~:\
+ :kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:kh=\E[1~:kl=\EOD:\
+ :kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[8m:\
+ :mr=\E[7m:nd=\E[C:op=\E[39;49m:r1=\Ec:rc=\E8:sc=\E7:\
+ :se=\E[27m:sf=^J:so=\E[7m:sr=\EM:ta=^I:u6=\E[%i%d;%dR:\
+ :u7=\E[6n:ue=\E[24m:up=\E[A:us=\E[4m:
+
+# Entries for use by the `screen' program by Juergen Weigert,
+# Michael Schroeder, Oliver Laumann. The screen and
+# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
+# come from University of Wisconsin and may be older.
+# (screen: added :ve: on ANSI model -- esr)
+#
+# 'screen' defines extensions to termcap. Some are used in its terminal
+# description:
+# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
+# AX (bool) Does understand ANSI set default fg/bg color
+# (\E[39m / \E[49m).
+# S0 (str) Switch charset 'G0' to the specified charset.
+# E0 (str) Switch charset 'G0' back to standard charset.
+#
+# tested with screen 3.09.08
+screen|VT 100/ANSI X3.64 virtual terminal:\
+ :am:bs:km:mi:ms:pt:xn:G0:\
+ :Co#8:NC@:co#80:it#8:li#24:pa#64:U8#1:\
+ :@7=\E[4~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F1=\E[23~:F2=\E[24~:IC=\E[%d@:Km=\E[M:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:\
+ :ac=++,,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=\E[4l:\
+ :ho=\E[H:im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kB=\E[Z:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?1000l\E[?25h:\
+ :sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\EM:us=\E[4m:\
+ :vb=\Eg:ve=\E[34h\E[?25h:vi=\E[?25l:vs=\E[34l:E0=\E(B:\
+ :S0=\E(%p1%c:tc=ecma+color:
+# The bce and status-line entries are from screen 3.9.13 (and require some
+# changes to .screenrc).
+screen-bce|VT 100/ANSI X3.64 virtual terminal with bce:\
+ :ut:\
+ :ec@:tc=screen:
+screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line:\
+ :ds=\E_\E\\:fs=\E\\:ts=\E_:tc=screen:
+
+# ======================================================================
+# Entries for GNU Screen with 16 colors.
+# Those variations permit to benefit from 16 colors palette, and from
+# bold font and blink attribute separated from bright colors. But they
+# are less portable than the generic "screen" 8 color entries: Their
+# usage makes real sense only if the terminals you attach and reattach
+# do all support 16 color palette.
+
+screen-16color|GNU Screen with 16 colors:\
+ :tc=ibm+16color:tc=screen:
+
+screen-16color-s|GNU Screen with 16 colors and status line:\
+ :tc=ibm+16color:tc=screen-s:
+
+screen-16color-bce|GNU Screen with 16 colors and BCE:\
+ :tc=ibm+16color:tc=screen-bce:
+
+screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line:\
+ :ut:tc=ibm+16color:tc=screen-s:
+
+# ======================================================================
+# Entries for GNU Screen 4.02 with --enable-colors256.
+
+screen-256color|GNU Screen with 256 colors:\
+ :cc@:\
+ :Ic@:tc=xterm+256color:tc=screen:
+
+screen-256color-s|GNU Screen with 256 colors and status line:\
+ :cc@:\
+ :Ic@:tc=xterm+256color:tc=screen-s:
+
+screen-256color-bce|GNU Screen with 256 colors and BCE:\
+ :cc@:\
+ :Ic@:tc=xterm+256color:tc=screen-bce:
+
+screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line:\
+ :cc@:ut:\
+ :Ic@:tc=xterm+256color:tc=screen-s:
+
+# ======================================================================
+
+# Read the fine manpage:
+# When screen tries to figure out a terminal name for
+# itself, it first looks for an entry named "screen.<term>",
+# where <term> is the contents of your $TERM variable. If
+# no such entry exists, screen tries "screen" (or "screen-w"
+# if the terminal is wide (132 cols or more)). If even this
+# entry cannot be found, "vt100" is used as a substitute.
+#
+# Notwithstanding the manpage, screen uses its own notion of the termcap
+# and some keys from "screen.<term>" are ignored. Here is an entry which
+# covers those (tested with screen 4.00.02) -TD
+screen+fkeys|function-keys according to screen:\
+ :*6@:@0@:@7=\E[4~:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kh=\E[1~:
+#
+# Here are a few customized entries which are useful -TD
+#
+# Notes:
+# (a) screen does not support invis.
+# (b) screen's implementation of bw is incorrect according to tack.
+# (c) screen appears to hardcode the strings for khome/kend, making it
+# necessary to override the "use=" clause's values (screen+fkeys).
+# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
+# which is NOT the same as the terminfo screen.<term>.
+# (e) when screen finds one of these customized entries, it sets $TERM to
+# match. Hence, no "screen.xterm" entry is provided, since that would
+# create heartburn for people running remote xterm's.
+#
+# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
+# since the default translations override the built-in keycode
+# translation. They are suppressed here to show what is tested by tack.
+screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm:\
+ :bw:ut@:\
+ :#3@:%c@:%e@:mk@:ml@:mu@:tc=screen+fkeys:tc=xterm-new:
+# xterm-r6 does not really support khome/kend unless it is propped up by
+# the translations resource.
+screen.xterm-r6|screen customized for X11R6 xterm:\
+ :bw:tc=screen+fkeys:tc=xterm-r6:
+# Color applications running in screen and TeraTerm do not play well together
+# on Solaris because Sun's curses implementation gets confused.
+screen.teraterm|disable ncv in teraterm:\
+ :NC#127:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :tc=screen+fkeys:tc=screen:
+# Other terminals
+screen.rxvt|screen in rxvt:\
+ :bw:XT:\
+ :kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:vb@:vs@:tc=screen+fkeys:\
+ :tc=vt100+enq:tc=rxvt+pcfkeys:tc=vt220+keypad:tc=screen:
+screen.Eterm|screen in Eterm:\
+ :tc=screen+fkeys:tc=Eterm:
+screen.mrxvt|screen in mrxvt:\
+ :tc=screen+fkeys:tc=mrxvt:
+screen.vte|screen in any VTE-based terminal:\
+ :tc=screen+fkeys:tc=vte:
+screen.gnome|screen in GNOME Terminal:\
+ :tc=screen+fkeys:tc=gnome:
+screen.konsole|screen in KDE console window:\
+ :tc=screen+fkeys:tc=konsole:
+# fix the backspace key
+screen.linux|screen in linux console:\
+ :bw:\
+ :kB@:kb=\177:tc=screen+fkeys:tc=screen:
+screen.mlterm|screen in mlterm:\
+ :tc=screen+fkeys:tc=mlterm:
+
+# The default "screen" entry is reasonably portable, but not optimal for the
+# most widely-used terminal emulators. The "bce" capability is supported in
+# screen since 3.9.13, and when used, will require fewer characters to be sent
+# to the terminal for updates.
+#
+# If you are using only terminals which support bce, then you can use this
+# feature in your screen configuration.
+#
+# Adding these lines to your ".screenrc" file will allow using these customized
+# entries:
+# term screen-bce
+# bce on
+# defbce on
+screen-bce.xterm-new|screen optimized for modern xterm:\
+ :ut:\
+ :ec@:tc=screen.xterm-new:
+screen-bce.rxvt|screen optimized for rxvt:\
+ :ut:\
+ :ec@:tc=screen.rxvt:
+screen-bce.Eterm|screen optimized for Eterm:\
+ :ut:\
+ :ec@:tc=screen.Eterm:
+screen-bce.mrxvt|screen optimized for mrxvt:\
+ :ut:\
+ :ec@:tc=screen.mrxvt:
+screen-bce.gnome|screen optimized for GNOME-Terminal:\
+ :ut:\
+ :ec@:tc=screen.gnome:
+screen-bce.konsole|screen optimized for KDE console window:\
+ :ut:\
+ :ec@:tc=screen.konsole:
+screen-bce.linux|screen optimized for linux console:\
+ :ut:\
+ :ec@:tc=screen.linux:
+screen-bce.mlterm|screen optimized for mlterm:\
+ :ut:\
+ :ec@:tc=screen.mlterm:
+
+screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols:\
+ :co#132:tc=screen:
+
+screen2|old VT 100/ANSI X3.64 virtual terminal:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bt=\E[Z:cd=\E[J:\
+ :ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ic=:im=\E[4h:k0=\E~:\
+ :k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
+ :k9=\E0I:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
+ :me=\E[m:nd=\E[C:nw=^M^J:r1=\Ec:rc=\E8:sc=\E7:se=\E[23m:\
+ :sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:
+# (screen3: removed unknown ":xv:LP:G0:" -- esr)
+screen3|older VT 100/ANSI X3.64 virtual terminal:\
+ :km:mi:ms:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\
+ :cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
+ :ho=\E[H:im=\E[4h:is=\E)0:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kb=^H:kd=\EOB:ke=\E>:kl=\EOD:kr=\EOC:ks=\E=:ku=\EOA:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:r1=\Ec:\
+ :rc=\E8:sc=\E7:se=\E[23m:sf=^J:so=\E[3m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\E[24m:up=\EM:us=\E[4m:
+
+# Francesco Potorti <[email protected]>:
+# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
+# been maintained until recently by the National Center for Supercomputer
+# Applications, and it is feature rich, stable and free. It can be downloaded
+# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
+# xterm+sl, and the docs at NCSA. It works well.
+#
+# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
+# The terminal options should be set as follows:
+# Xterm sequences ON
+# use VT wrap mode ON
+# use Emacs arrow keys OFF
+# CTRL-COMND is Emacs meta ON
+# 8 bit mode ON
+# answerback string: "ncsa-vt220-8"
+# setup keys: all disabled
+#
+# Application mode is not used.
+#
+# Other special mappings:
+# Apple VT220
+# HELP Find
+# HOME Insert here
+# PAGEUP Remove
+# DEL Select
+# END Prev Screen
+# PAGEDOWN Next Screen
+#
+# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
+# text.
+#
+# The status-line manipulation is a mapping of the xterm-compatible control
+# sequences for setting the window-title. So you must use tsl and fsl in
+# pairs, since the latter ends the string that is loaded to the window-title.
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode:\
+ :am:hs:km:mi:ms:xn:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :ds=\E]0;\007:ei=\E[4l:fs=^G:ho=\E[H:\
+ :if=/usr/share/tabset/vt100:im=\E[4h:\
+ :is=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>:k1=\E[17~:\
+ :k2=\E[18:k3=\E[19~:k4=\E[20~:k5=\E[21~:k6=\E[23~:\
+ :k7=\E[24~:k8=\E[25~:k9=\E[26~:kD=\E[4~:kN=\E[6~:kP=\E[3~:\
+ :kb=^H:kd=\E[B:kh=\E[2~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:rc=\E8:\
+ :rs=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>:sc=\E7:\
+ :se=\E[27m:sf=150*\n:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E[2J\E8:ti=\E7:ts=\E]0;:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ansi+enq:
+ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode:\
+ :tc=ncsa-m:tc=klone+color:
+ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode:\
+ :hs@:\
+ :ds@:fs@:ts@:tc=ncsa:
+ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode:\
+ :hs@:\
+ :ds@:fs@:ts@:tc=ncsa-m:
+# alternate -TD:
+# The documented function-key mapping refers to the Apple Extended Keyboard
+# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
+# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
+# some keyboards and many applications require these as F1-F4.
+#
+ncsa-vt220|NCSA Telnet using vt220-compatible function keys:\
+ :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\
+ :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:tc=ncsa:
+
+#### Pilot Pro Palm-Top
+#
+# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
+# http://www.ai/~iang/TGssh/
+pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional:\
+ :am:bs:xn:\
+ :co#39:li#16:\
+ :bl=^G:cl=\Ec:cm=\Em%+ %+ :cr=^M:do=^J:ho=\Em\040\040:\
+ :kN=^L:kP=^K:kb=^H:kd=^J:kl=^H:le=^H:nw=\Em~\040:se=\EB:\
+ :sf=^J:so=\Eb:ta=^I:
+
+# From: Federico Bianchi <[email protected]>
+# These entries are for the Embeddable Linux Kernel System (ELKS)
+# project - an heavily stripped down Linux to be run on 16 bit
+# boxes or, eventually, to be used in embedded systems - and have been
+# adapted from the stock ELKS termcap. The project itself looks stalled,
+# and the latest improvements I know of date back to March 2000.
+#
+# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
+# as an added bonus, this deals with all the capabilities common to
+# both VT52 and ANSI (or, eventually, "special") modes.
+
+elks-glasstty|ELKS glass-TTY capabilities:\
+ :am:bs:\
+ :co#80:it#8:li#25:\
+ :bl=^G:cr=^M:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:
+
+elks-vt52|ELKS vt52 console:\
+ :ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :do=\EB:ho=\EH:le=\ED:nd=\EC:\
+ :up=\EA:tc=elks-glasstty:
+
+elks-ansi|ELKS ANSI console:\
+ :ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:do=\E[B:ho=\E[H:\
+ :le=\E[D:nd=\E[C:se=\E[m:so=\E[7m:up=\E[A:\
+ :tc=elks-glasstty:
+
+# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
+# instead of VT52, but the "elks" entry still refers to the latter.
+
+elks|default ELKS console:\
+ :tc=elks-vt52:
+
+# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
+# one but in screen size
+
+sibo|ELKS SIBO console:\
+ :co#61:it#8:li#20:tc=elks-vt52:
+
+######## COMMERCIAL WORKSTATION CONSOLES
+#
+
+#### Alpha consoles
+#
+
+# This is from the OSF/1 Release 1.0 termcap file
+pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation:\
+ :am:xo:\
+ :co#80:li#25:\
+ :al=\E[L:bl=^G:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:\
+ :kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:nw=^M^J:se=\E[m:so=\E[7m:ta=^I:up=\E[A:
+
+#### Sun consoles
+#
+
+# :is1: resets scrolling region in case a previous user had used "tset vt100"
+oldsun|Sun Microsystems Workstation console:\
+ :am:bs:km:mi:ms:\
+ :co#80:it#8:li#34:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:bl=^G:\
+ :cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ei=:i1=\E[1r:ic=\E[@:im=:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:ta=^I:up=\E[A:
+# From: Alexander Lukyanov <[email protected]>, 14 Nov 1995
+# :li: capability later corrected by J.T. Conklin <[email protected]>
+# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
+sun-il|Sun Microsystems console with working insert-line:\
+ :am:km:ms:\
+ :co#80:li#34:\
+ :%7=\E[194z:&5=\E[193z:&8=\E[195z:@7=\E[220z:AL=\E[%dL:\
+ :DC=\E[%dP:DL=\E[%dM:F1=\E[234z:F2=\E[235z:IC=\E[%d@:\
+ :K2=\E[218z:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ic=\E[@:im=:\
+ :k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:\
+ :k6=\E[229z:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:\
+ :kD=\177:kI=\E[247z:kN=\E[222z:kP=\E[216z:kb=^H:kd=\E[B:\
+ :kh=\E[214z:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:rs=\E[s:se=\E[m:sf=^J:so=\E[7m:ta=^I:u8=\E[1t:\
+ :u9=\E[11t:ue@:up=\E[A:
+# On some versions of CGSIX framebuffer firmware (SparcStation 5), :al:/:AL:
+# flake out on the last line. Unfortunately, without them the terminal has no
+# way to scroll.
+sun-cgsix|sun-ss5|Sun SparcStation 5 console:\
+ :AL@:al@:tc=sun-il:
+# If you are using an SS5, change the sun definition to use sun-ss5.
+sun|sun1|sun2|Sun Microsystems Inc. workstation console:\
+ :tc=sun-il:
+
+# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
+sun-s|Sun Microsystems Workstation window with status line:\
+ :hs:\
+ :ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun:
+sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs:\
+ :hs:\
+ :ds=\E]l\E\\:fs=\E\\:ts=\E]l:tc=sun-e:
+sun-48|Sun 48-line window:\
+ :co#80:li#48:tc=sun:
+sun-34|Sun 34-line window:\
+ :co#80:li#34:tc=sun:
+sun-24|Sun 24-line window:\
+ :co#80:li#24:tc=sun:
+sun-17|Sun 17-line window:\
+ :co#80:li#17:tc=sun:
+sun-12|Sun 12-line window:\
+ :co#80:li#12:tc=sun:
+sun-1|Sun 1-line window for sysline:\
+ :es:hs:\
+ :co#80:li#1:\
+ :ds=^L:fs=\E[K:ts=^M:tc=sun:
+sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character:\
+ :ei@:ic@:im@:tc=sun:
+sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history:\
+ :li#35:\
+ :te=\E[>4h:ti=\E[>4l:tc=sun:
+sun-type4|Sun Workstation console with type 4 keyboard:\
+ :kd=\E[221z:kl=\E[217z:kr=\E[219z:ku=\E[215z:tc=sun-il:
+
+# Most of the current references to sun-color are from users wondering why this
+# is the default on install. Details from reading the wscons manpage, adding
+# cub, etc., here (rather than in the base sun-il entry) since it is not clear
+# when those were added -TD (2005-05-28)
+#
+# According to wscons manpage, color is supported only on IA systems.
+# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
+# does not list these. It also sets ncv#3, however that corresponds to
+# underline and standout.
+#
+# Since the documentation and terminfo do not agree, see also current code at
+# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
+#
+# That (actually a different driver which "supports" sun-color) also supports
+# these features:
+# vpa=\E[%i%p1%dd
+# hpa=\E[%i%p1%d`
+# cbt=\E[Z
+# dim=\E[2m
+# blink=\E[5m
+# It supports bold, but not underline -TD (2009-09-19)
+sun-color|Sun Microsystems Workstation console with color support (IA systems):\
+ :Co#8:NC#3:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:ho=\E[H:op=\E[0m:so=\E[1m:tc=sun:
+
+#### Iris consoles
+#
+
+# (wsiris: this had extension capabilities
+# :HS=\E7F2:HE=\E7F7:\
+# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
+# See the note on Iris extensions near the end of this file.
+# Finally, removed suboptimal :cl:=\EH\EJ and added :do: &
+# :vb: from BRL -- esr)
+wsiris|iris40|iris emulating a 40 line visual 50 (approximately):\
+ :am:bs:nc:pt:\
+ :co#80:it#8:kn#3:li#40:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :dl=\EM:\
+ :do=\EB:ho=\EH:is=\E7B0\E7F7\E7C2\E7R3:k0=\E0:k1=\E1:\
+ :k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:\
+ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\E7F7:mh=\E7F2:nd=\EC:\
+ :nl=\EB:se=\E0@:sf=^J:so=\E9P:sr=\EI:ta=^I:ue=\E7R3\E0@:\
+ :up=\EA:us=\E7R2\E9P:vb=\E7F4\E7B1\013\E7F7\E7B0:ve=\E>:\
+ :vs=\E;:
+
+#### NeWS consoles
+#
+# Console terminal windows under the NeWS (Sun's Display Postscript windowing
+# environment). Note: these have nothing to do with Sony's News workstation
+# line.
+#
+
+# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
+# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
+psterm|psterm-basic|NeWS psterm-80x34:\
+ :am:bs:hs:km:ul:\
+ :co#80:it#8:li#34:\
+ :al=\EA:cd=\EB:ce=\EC:cl=^L:cm=\E%d;%d;:cs=\EE%d;%d;:\
+ :dc=\EF:dl=\EK:do=\EP:ei=\ENi:fs=\ENl:ho=\ER:i1=\EN*:\
+ :im=\EOi:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\ET:ll=\EU:\
+ :mb=\EOb:md=\EOd:me=\EN*:mr=\EOr:nd=\EV:rc=^\:sc=^]:se=\ENo:\
+ :sf=\EW:so=\EOo:sr=\EX:ta=^I:te=\ENt:ti=\EOt:ts=\EOl:\
+ :ue=\ENu:up=\EY:us=\EOu:vb=\EZ:
+psterm-96x48|NeWS psterm 96x48:\
+ :co#96:li#48:tc=psterm:
+psterm-90x28|NeWS psterm 90x28:\
+ :co#90:li#28:tc=psterm:
+psterm-80x24|NeWS psterm 80x24:\
+ :co#80:li#24:tc=psterm:
+# This is a faster termcap for psterm. Warning: if you use this termcap,
+# some control characters you type will do strange things to the screen.
+# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
+psterm-fast|NeWS psterm fast version (flaky ctrl chars):\
+ :am:bs:hs:km:ul:\
+ :co#80:it#8:li#34:\
+ :al=^A:cd=^B:ce=^C:cl=^L:cm=\004%d;%d;:cs=\005%d;%d;:dc=^F:\
+ :dl=^K:do=^P:ei=^Ni:fs=^Nl:ho=^R:i1=^N*:im=^Oi:kd=\E[B:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^T:ll=^U:mb=^Ob:md=^Od:me=^N*:\
+ :mr=^Or:nd=^V:rc=^\:sc=^]:se=^No:sf=^W:so=^Oo:sr=^X:ta=^I:\
+ :te=^Nt:ti=^Ot:ts=^Ol:ue=^Nu:up=^Y:us=^Ou:vb=^Z:
+
+#### NeXT consoles
+#
+# Use `glasstty' for the Workspace application
+#
+
+# From: Dave Wetzel <[email protected]> 22 Dec 1995
+next|NeXT console:\
+ :am:xt:\
+ :co#80:it#8:li#24:\
+ :bl=^G:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:cr=^M:do=^J:ho=\E[H:\
+ :kb=^H:kd=^J:kl=^H:le=^H:me=\E[m:nd=\E[C:nw=^M^J:se=\E[4;1m:\
+ :sf=^J:so=\E[4;2m:ta=^I:up=\E[A:
+nextshell|NeXT Shell application:\
+ :am:\
+ :co#80:\
+ :bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I:
+
+#### Sony NEWS workstations
+#
+
+# (news-unk: this had :KB=news: -- esr)
+news-unk|SONY NEWS vt100 emulator common entry:\
+ :am:bs:pt:xn:\
+ :co#80:\
+ :AL=\E[%dL:DL=\E[%dM:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dl=\E[M:do=^J:ho=\E[H:if=/usr/share/tabset/vt100:\
+ :is=\E[?7h\E[?1l\E[?3l\E7\E8:k0=\EOY:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:k9=\EOX:\
+ :kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
+ :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
+ :nl=^J:rc=\E8:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r:\
+ :sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:\
+ :us=\E[4m:
+#
+# (news-29: this had :TY=ascii: --esr)
+news-29:\
+ :li#29:tc=news-unk:
+# (news-29-euc: this had :TY=euc: --esr)
+news-29-euc:\
+ :tc=news-29:
+# (news-29-sjis: this had :TY=sjis: --esr)
+news-29-sjis:\
+ :tc=news-29:
+#
+# (news-33: this had :TY=ascii: --esr)
+news-33:\
+ :li#33:tc=news-unk:
+# (news-33-euc: this had :TY=euc: --esr)
+news-33-euc:\
+ :tc=news-33:
+# (news-33-sjis: this had :TY=sjis: --esr)
+news-33-sjis:\
+ :tc=news-33:
+#
+# (news-42: this had :TY=ascii: --esr)
+news-42:\
+ :li#42:tc=news-unk:
+# (news-42-euc: this had :TY=euc: --esr)
+news-42-euc:\
+ :tc=news-42:
+# (news-42-sjis: this had :TY=sjis: --esr)
+news-42-sjis:\
+ :tc=news-42:
+#
+# NEWS-OS old termcap entry
+#
+# (news-old-unk: this had :KB=news:TY=sjis: --esr)
+news-old-unk|SONY NEWS vt100 emulator common entry:\
+ :am:bs:pt:xn:\
+ :co#80:vt#3:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
+ :if=/usr/share/tabset/vt100:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mr=\E[7m:nd=\E[C:nl=^J:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
+ :so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+#
+# (nwp512: this had :DE=^H:, which I think means :bs: --esr)
+nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines:\
+ :bs:\
+ :li#40:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8:\
+ :tc=news-old-unk:
+#
+# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
+nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line:\
+ :li#42:\
+ :is=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8:tc=news-old-unk:
+#
+# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as :bs:. --esr)
+nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines:\
+ :bs:\
+ :li#40:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8:\
+ :tc=news-old-unk:
+#
+# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
+nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines:\
+ :bs:\
+ :li#31:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8:\
+ :tc=news-old-unk:
+#
+# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as :bs:; --esr)
+# also the alias vt100-bm.
+nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines:\
+ :bs:\
+ :li#33:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8:\
+ :tc=news-old-unk:
+#
+# (nwp513-o: had :DE=^H:, I think that's :bs:; also the alias vt100-bm --esr)
+nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines:\
+ :bs:\
+ :li#31:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8:\
+ :tc=news-old-unk:
+#
+# (news28: this had :DE=^H:, I think that's :bs:, and :KB=nws1200: --esr)
+news28|sony vt100 emulator 28 lines:\
+ :bs:\
+ :li#28:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8:\
+ :tc=news-old-unk:
+#
+# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
+news29|news28-a|sony vt100 emulator 29 lines:\
+ :li#29:\
+ :is=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8:\
+ :tc=news-old-unk:
+#
+# (news511: this had :TY=sjis: --esr)
+nwp511|nwp-511|nwp-511 vt100:\
+ :am:bs:pt:xn:\
+ :co#80:li#24:\
+ :al=\E[L:cd=30\E[J:ce=3\E[K:cl=20\E[;H\E[2J:\
+ :cm=\E[%i%d;%dH:dl=\E[M:do=\E[B:\
+ :is=\E[?5l\E[?1l\E>\E[?7h\E[?8h:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k5=\EOT:k6=\E#W:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ku=\E[A:le=\E[D:nd=\E[C:\
+ :rs=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h:se=2\E[m:\
+ :so=2\E[7m:sr=5\EM:ue=2\E[m:up=2\E[A:us=2\E[4m:\
+ :vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:
+# (news517: this had :TY=sjis:. --esr)
+nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows:\
+ :es:hs:\
+ :co#80:li#30:\
+ :ds=\E[1$~:fs=\E[0$}:i2=\E[2$~\n:\
+ :is=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :ts=\E[1$}\E[;%df:tc=vt200:
+# (news517-w: this had :TY=sjis:. --esr)
+nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows:\
+ :es:hs:\
+ :co#132:li#50:\
+ :ds=\E[1$~:fs=\E[0$}:i2=\E[2$~\n:\
+ :is=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :ts=\E[1$}\E[;%df:tc=vt200:
+
+#### Common Desktop Environment
+#
+
+# This ships with Sun's CDE in Solaris 2.5
+# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <[email protected]>
+dtterm|CDE desktop terminal:\
+ :am:mi:ms:xn:xo:\
+ :NC@:co#80:it#8:li#24:lm#0:\
+ :%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=\E[%dL:DC=\E[%dP:\
+ :DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
+ :F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
+ :F9=\E[33~:FA=\E[34~:IC=\E[%d@:LE=\E[%dD:RA=\E[?7l:\
+ :RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ec=\E[%dX:\
+ :ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E F\E>\E[?1l\E[?7h\E[?45l:k1=\E[11~:k2=\E[12~:\
+ :k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
+ :kP=\E[5~:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
+ :nd=\E[C:nw=\EE:rc=\E8:sc=\E7:se=\E[22;27m:sf=\ED:\
+ :so=\E[2;7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:tc=ecma+color:
+
+#### Non-Unix Consoles
+#
+
+#### EMX termcap.dat compatibility modes
+#
+# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
+# no_color_video to inform the application that standout(1), underline(2)
+# reverse(4) and invisible(64) don't work with color.
+emx-base|DOS special keys:\
+ :bw:ut:\
+ :NC#71:it#8:\
+ :bl=^G:tc=ansi.sys:
+
+# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
+# a Unix-style environment used on OS/2. (Note that the suffix makes some
+# names longer than 14 characters, the nominal maximum).
+#
+# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
+ansi-emx|ANSI.SYS color:\
+ :am:eo:mi:ms:ut:xo:\
+ :Co#8:co#80:it#8:li#25:pa#64:\
+ :&7=^Z:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dp:IC=\E[%d@:K2=\E[G:\
+ :S2=\E[11m:S3=\E[10m:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[1;33;44m\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
+ :do=^J:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k0=\200D:kH=\200O:\
+ :kb=^H:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m\E[1;33;44m:\
+ :mr=\E[5;37;41m:nd=\E[C:nw=^M^J:r1=\Ec:\
+ :se=\E[0;44m\E[1;33m:sf=^J:so=\E[0;31;47m:st=\EH:ta=^I:\
+ :u8=\E[?6c:u9=\E[c:ue=\E[0;44m\E[1;33m:up=\E[A:\
+ :us=\E[1;31;44m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
+ :tc=emx-base:
+# nice colors for Emacs (white on blue, mode line white on cyan)
+ansi-color-2-emx|ANSI.SYS color 2:\
+ :AF=\E[3%dm:cl=\E[0;37;44m\E[H\E[J:me=\E[0;37;44m:\
+ :mr=\E[1;37;46m:r1=\Ec:se=\E[0;37;44m:so=\E[1;37;46m:\
+ :ue=\E[0;37;44m:us=\E[1;36;44m:tc=ansi-emx:
+# nice colors for Emacs (white on black, mode line black on cyan)
+ansi-color-3-emx|ANSI.SYS color 3:\
+ :AF=\E[3%dm:cl=\E[0;37;40m\E[H\E[J:me=\E[0;10m:\
+ :mr=\E[1;37;46m:r1=\Ec:se=\E[0;37;40m:so=\E[1;37;46m:\
+ :ue=\E[0;37;40m:us=\E[0;36;40m:tc=ansi-emx:
+mono-emx|stupid monochrome ansi terminal with only one kind of emphasis:\
+ :am:\
+ :co#80:it#8:li#24:\
+ :K2=\E[G:ce=\E[K:cl=50\E[H\E[2J:cm=\E[%i%d;%dH:do=\E[B:\
+ :ho=\E[H:k0=\200D:k1=\200;:k2=\200<:k3=\200=:k4=\200>:\
+ :k5=\200?:k6=\200@:k7=\200A:k8=\200B:k9=\200C:kH=\200O:\
+ :kI=\200R:kN=\200Q:kP=\200I:kb=^H:kd=\200P:kh=\200G:\
+ :kl=\200K:kr=\200M:ku=\200H:le=\E[D:me=\E[0m:mr=\E[7m:\
+ :nd=\E[C:nw=^M^J:ta=^I:up=\E[A:
+
+# Use this for cygwin32 (tested with beta 19.1)
+# underline is colored bright magenta
+# shifted kf1-kf12 are kf11-kf22
+cygwinB19|ansi emulation for cygwin32:\
+ :@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
+ :F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:\
+ :FA=\E[34~:RA@:SA@:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:\
+ :k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:\
+ :kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:tc=ansi.sys:
+
+# Use this for cygwin (tested with version 1.1.0).
+# I've combined pcansi and linux. Some values of course were different and
+# I've indicated which of these were and which I used.
+# Cheers, [email protected]
+# several changes based on running with tack and comparing with older entry -TD
+# more changes from csw:
+# add cbt [backtab]
+# remove eo [erase overstrike with blank]
+# change clear was \E[H\E[J now \E[2J (faster?)
+# remove cols
+# remove lines
+# remove ncv#3 [colors collide with highlights, bitmask] not applicable
+# to MSDOS box?
+# add cub [cursor back param]
+# add cuf [cursor forward param]
+# add cuu [cursor up param]
+# add cud [cursor down param]
+# add hs [has status line]
+# add fsl [return from status line]
+# add tsl [go to status line]
+# add smacs [Start alt charset] (not sure if this works)
+# add rmacs [End alt charset] (ditto)
+# add smcup [enter_ca_mode] (save console; thanks Corinna)
+# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
+# add kb2 [center of keypad]
+# add u8 [user string 8] \E[?6c
+# add el [clear to end of line] \E[K
+# Notes:
+# cnorm [make cursor normal] not implemented
+# flash [flash] not implemented
+# blink [blink] not implemented very usefully in cygwin? \E[5m
+# dim [dim] not implemented very usefully in cygwin? \E[2m
+# cub1 [cursor back 1] typically \E[D, but ^H is faster?
+# kNXT [shifted next key] not implemented
+# kPRV [shifted prev key] not implemented
+# khome [home key] really is \E[1~ NOT \E[H
+# tbc [clear tab stops] not implemented
+# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
+# smpch [Start PC charset] is \E[11m, same as smacs
+# rmpch [End PC charset] is \E[10m, same as rmacs
+# mir [move in insert mode] fails in tack?
+# bce [back color erase] causes problems with change background color?
+# cvvis [make cursor very visible] causes a stackdump when testing with
+# testcurs using the output option? \E[?25h\E[?8c
+# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
+# ech [erase characters param] broken \E[%p1%dX
+# kcbt [back-tab key] not implemented in cygwin? \E[Z
+#
+# 2005/11/12 -TD
+# Remove cbt since it does not work in current cygwin
+# Add 'mir' and 'in' flags based on tack
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+cygwin|ansi emulation for Cygwin:\
+ :am:hs:mi:ms:xo:\
+ :Co#8:it#8:pa#64:\
+ :&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
+ :DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
+ :F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[32~:\
+ :F9=\E[33~:FA=\E[34~:IC=\E[%d@:K2=\E[G:LE=\E[%dD:\
+ :RI=\E[%dC:S2=\E[11m:S3=\E[10m:UP=\E[%dA:al=\E[L:bl=^G:\
+ :cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ei=\E[4l:fs=^G:ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[[A:k2=\E[[B:\
+ :k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :md=\E[1m:me=\E[0m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:\
+ :op=\E[39;49m:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\
+ :so=\E[7m:sr=\EM:ta=^I:te=\E[2J\E[?47l\E8:ti=\E7\E[?47h:\
+ :ts=\E];:ue=\E[24m:up=\E[A:us=\E[4m:tc=vt102+enq:
+
+# I've supplied this so that you can help test new values and add other
+# features. Cheers, [email protected].
+#
+# Some features are from pcansi. The op value is from linux. Function-keys
+# are from linux. These have been tested not to cause problems. xenl was in
+# this list, but DOES cause problems so it has been removed
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+cygwinDBG|Debug Version for Cygwin:\
+ :am:eo:mi:ms:xo:\
+ :Co#8:NC#3:co#80:it#8:li#24:pa#64:\
+ :%c=\E[6$:%e=\E[5$:&7=^Z:@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\
+ :F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
+ :F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:IC=\E[%d@:\
+ :K2=\E[G:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:\
+ :bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:cv=\E[%i%dd:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:\
+ :k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kB=\E[Z:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:op=\E[39;49m:\
+ :r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
+ :st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:vb=200\E[?5h\E[?5l:\
+ :ve=\E[?25h:tc=vt102+enq:
+
+# Key definitions:
+# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
+# encodings used by other x86 environments. All others are invented for DJGPP.
+# Oddly enough, while several combinations of modifiers are tabulated, there is
+# none for shifted cursor keys.
+#
+# F1 \E[[A
+# F2 \E[[B
+# F3 \E[[C
+# F4 \E[[D
+# F5 \E[[E
+# F6 \E[17~
+# F7 \E[18~
+# F8 \E[19~
+# F9 \E[20~
+# F10 \E[21~
+# F11 \E[23~
+# F12 \E[24~
+#
+# Delete \E[3~
+# Down Arrow \E[B
+# End \E[4~
+# Home \E[1~
+# Insert \E[2~
+# Left Arrow \E[D
+# Page Down \E[6~
+# Page Up \E[5~
+# Right Arrow \E[C
+# Up Arrow \E[A
+#
+# Shift-F1 \E[25~
+# Shift-F2 \E[26~
+# Shift-F3 \E[27~
+# Shift-F4 \E[28~
+# Shift-F5 \E[29~
+# Shift-F6 \E[30~
+# Shift-F7 \E[31~
+# Shift-F8 \E[32~
+# Shift-F9 \E[33~
+# Shift-F10 \E[34~
+# Shift-F11 \E[35~
+# Shift-F12 \E[36~
+#
+# Ctrl-F1 \E[47~
+# Ctrl-F2 \E[48~
+# Ctrl-F3 \E[49~
+# Ctrl-F4 \E[50~
+# Ctrl-F5 \E[51~
+# Ctrl-F6 \E[52~
+# Ctrl-F7 \E[53~
+# Ctrl-F8 \E[54~
+# Ctrl-F9 \E[55~
+# Ctrl-F10 \E[56~
+# Ctrl-F11 \E[57~
+# Ctrl-F12 \E[58~
+#
+# Ctrl-Delete \E[43~
+# Ctrl-Down Arrow \E[38~
+# Ctrl-End \E[44~
+# Ctrl-Home \E[41~
+# Ctrl-Insert \E[42~
+# Ctrl-Left Arrow \E[39~
+# Ctrl-Page Down \E[46~
+# Ctrl-Page Up \E[45~
+# Ctrl-Right Arrow \E[40~
+# Ctrl-Up Arrow \E[37~
+#
+# Alt-F1 \E[59~
+# Alt-F2 \E[60~
+# Alt-F3 \E[61~
+# Alt-F4 \E[62~
+# Alt-F5 \E[63~
+# Alt-F6 \E[64~
+# Alt-F7 \E[65~
+# Alt-F8 \E[66~
+# Alt-F9 \E[67~
+# Alt-F10 \E[68~
+# Alt-F11 \E[79~
+# Alt-F12 \E[80~
+#
+# Alt-Delete \E[65~
+# Alt-Down Arrow \E[60~
+# Alt-End \E[66~
+# Alt-Home \E[41~
+# Alt-Insert \E[64~
+# Alt-Left Arrow \E[61~
+# Alt-Page Down \E[68~
+# Alt-Page Up \E[67~
+# Alt-Right Arrow \E[62~
+# Alt-Up Arrow \E[59~
+#
+# Also:
+# Alt-A \E[82~
+# Alt-B \E[82~
+# Alt-C \E[83~
+# Alt-D \E[84~
+# Alt-E \E[85~
+# Alt-F \E[86~
+# Alt-G \E[87~
+# Alt-H \E[88~
+# Alt-I \E[89~
+# Alt-J \E[90~
+# Alt-K \E[91~
+# Alt-L \E[92~
+# Alt-M \E[93~
+# Alt-N \E[94~
+# Alt-O \E[95~
+# Alt-P \E[96~
+# Alt-Q \E[97~
+# Alt-R \E[98~
+# Alt-S \E[99~
+# Alt-T \E[100~
+# Alt-U \E[101~
+# Alt-V \E[102~
+# Alt-W \E[103~
+# Alt-X \E[104~
+# Alt-Y \E[105~
+# Alt-Z \E[106~
+djgpp|ansi emulation for DJGPP alpha:\
+ :am:ms:ut:xo:xs:xt:\
+ :Co#8:it#8:pa#64:\
+ :@7=\E[4~:AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:\
+ :DL=\E[%dM:DO=\E[%dB:F1=\E[23~:F2=\E[24~:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :al=\E[L:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :ch=\E[%i%dG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\E[B:ec=\E[%dX:ei=:ho=\E[H:\
+ :ic=\E[@:im=:k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
+ :kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
+ :me=\E[m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:op=\E[37;40m:\
+ :se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:us=\E[4m:\
+ :ve=\E[v:vi=\E[1v:vs=\E[2v:
+
+djgpp203|Entry for DJGPP 2.03:\
+ :am:bs:\
+ :co#80:it#8:li#25:\
+ :bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:le=^H:nw=^M^J:sf=^J:\
+ :ta=^I:
+
+djgpp204|Entry for DJGPP 2.04:\
+ :am:bs:AX:\
+ :Co#8:NC#3:co#80:it#8:li#25:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:\
+ :DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
+ :SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ec=\E[%dX:ei=:ho=\E[H:ic=\E[@:im=:k0=\E[21~:\
+ :k1=\E[[A:k2=\E[[B:k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
+ :kH=\E[4~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:\
+ :kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
+ :md=\E[1m:me=\E[m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:\
+ :se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:us=\E[4m:\
+ :ve=\E[v:vi=\E[1v:vs=\E[2v:
+
+# This is tested using U/Win's telnet. Scrolling is omitted because it is
+# buggy. Another odd bug appears when displaying "~" in alternate character
+# set (the emulator spits out error messages). Compare with att6386 -TD
+uwin|U/Win 3.2 console:\
+ :am:eo:in:ms:xn:xo:\
+ :Co#8:NC#58:it#8:pa#64:\
+ :@7=\E[Y:AB=\E[4%dm:AF=\E[3%dm:DC=\E[%dP:F1=\EOZ:F2=\EOA:\
+ :IC=\E[%d@:S2=\E[11m:S3=\E[10m:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :ae=\E[10m:as=\E[11m:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:do=^J:\
+ :ec=\E[%dX:ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
+ :k9=\EOX:k;=\EOY:kD=\177:kI=\E[@:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:\
+ :me=\E[0;10m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:\
+ :op=\E[39;49m:r1=\Ec\E]R:rc=\E8:sc=\E7:se=\E[27m:so=\E[7m:\
+ :st=\EH:ta=^I:u6=\E[%i%d;%dR:u7=\E[6n:ue=\E[m:up=\E[A:\
+ :us=\E[4m:ve=\E[?25h:vi=\E[?25l:
+
+# This entry fits the Windows NT console when the _POSIX_TERM environment
+# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
+# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
+# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
+# systems is not, and (surprise!) they match very well.
+#
+# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
+# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
+# are the installation instructions a pile of mind-numbing bureaucratese,
+# but the termcap entry is actually broken and unusable as given; the :do:
+# capability is misspelled "d".
+#
+# To use this, you need to a bunch of environment variables:
+#
+# SET _POSIX_TERM=on
+# SET TERM=ansi
+# SET TERMCAP=location of termcap file in POSIX file format
+# which is case-sensitive.
+# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
+# SET TMP=//C/TEMP
+#
+# Important note: setting the TMP environment variable in POSIX style renders
+# it incompatible with a lot of other applications, including Visual C++. So
+# you should have a separate command window just for vi. All the other
+# variables may be permanently set in the Control Panel\System applet.
+#
+# You can find out more about the restrictions of this facility at
+# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
+#
+# From: Federico Bianchi <[email protected]>, 15 Jan 1997
+ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode:\
+ :am:bw:ms:\
+ :co#80:it#8:li#25:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:\
+ :ho=\E[H:kb=^H:kd=\E[V:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :me=\E[0m:mr=\E[7m:nd=\E[C:nw=\r\E[S:rc=\E[u:sc=\E[s:\
+ :se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:up=\E[A:
+# From: [email protected]
+# Date: 19 Feb 93 23:41:07 GMT
+# Here's a combination of ansi and vt100 termcap
+# entries that works nearly perfectly for me
+# (Gateway 2000 Handbook and Microsoft Works 3.0):
+pcmw|PC running Microsoft Works:\
+ :am:xn:\
+ :co#80:it#8:li#24:vt#3:\
+ :bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
+ :cm=5\E[%i%d;%dH:cr=^M:ct=2\E[3g:do=^J:ho=\E[H:\
+ :is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=2\E[5m:\
+ :md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=5\r\ED:rc=\E8:\
+ :rf=/usr/share/tabset/vt100:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=5\ED:so=2\E[7m:sr=5\EM:st=2\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:
+
+# From: Federico Bianchi
+# This is the entry for the OpenNT terminal.
+# The ntconsole name is for backward compatability.
+# This is for OpenNT 2.0 and later.
+# Later OpenNT was renamed to Interix.
+#
+# Presently it is distributed by Microsoft as Services For Unix (SFU).
+# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
+# the documentation dates from 1.9.9e) -TD
+
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color:\
+ :am:bw:ms:\
+ :co#80:li#25:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+ :SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:\
+ :cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:dl=\E[M:do=^J:\
+ :ho=\E[H:k0=\EFA:k1=\EF1:k2=\EF2:k3=\EF3:k4=\EF4:k5=\EF5:\
+ :k6=\EF6:k7=\EF7:k8=\EF8:k9=\EF9:kD=\E[M:kH=\E[U:kI=\E[L:\
+ :kN=\E[T:kP=\E[S:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=\E[D:ll=\E[U:md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:\
+ :nw=^M^J:rc=\E[u:sc=\E[s:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
+ :ta=^I:te=\E[2b\E[u\r\E[K:ti=\E[s\E[1b:ue=\E[m:up=\E[A:\
+ :us=\E[4m:
+
+opennt-35|ntconsole-35|OpenNT-term35 compatible with color:\
+ :li#35:tc=opennt:
+
+opennt-50|ntconsole-50|OpenNT-term50 compatible with color:\
+ :li#50:tc=opennt:
+
+opennt-60|ntconsole-60|OpenNT-term60 compatible with color:\
+ :li#60:tc=opennt:
+
+opennt-100|ntconsole-100|OpenNT-term100 compatible with color:\
+ :li#100:tc=opennt:
+
+# OpenNT wide terminals
+opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color:\
+ :co#125:tc=opennt:
+
+opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color:\
+ :li#35:tc=opennt-w:
+
+opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color:\
+ :li#50:tc=opennt-w:
+
+opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color:\
+ :li#60:tc=opennt-w:
+
+opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color:\
+ :co#132:tc=opennt:
+
+# OpenNT terminals with no smcup/rmcup (names match termcap entries)
+interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color:\
+ :te@:ti@:tc=opennt:
+
+opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color:\
+ :li#35:tc=opennt-nti:
+
+opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color:\
+ :li#50:tc=opennt-nti:
+
+opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color:\
+ :li#60:tc=opennt-nti:
+
+opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color:\
+ :li#100:tc=opennt-nti:
+
+######## COMMON TERMINAL TYPES
+#
+# This section describes terminal classes and maker brands that are still
+# quite common, but have proprietary command sets not blessed by ANSI.
+#
+
+#### Altos
+#
+# Altos made a moderately successful line of UNIX boxes. In 1990 they were
+# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
+# Acer has a web site at http://www.acer.com.
+#
+# Altos descriptions from Ted Mittelstaedt <[email protected]> 4 Sep 1993
+# His comments suggest they were shipped with the system.
+#
+
+# (altos2: had extension capabilities
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
+# :HL=^AP\r:SP=\E[i:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys. I have renamed them to keys 32 and up accordingly. Also,
+# :sr: was given as a boolean-- esr)
+altos2|alt2|altos-2|altos II:\
+ :co#80:it#8:li#24:sg#0:ug#0:\
+ :*5=^Am\r:*8=^An\r:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:FP=^Ac\r:\
+ :FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:\
+ :FW=^Aj\r:FX=^Ak\r:RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
+ :dl=\E[M:do=\E[1B:ei=:ho=\E[H:ic=\E[@:\
+ :if=/usr/share/tabset/vt100:im=:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=^AI\r:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:kB=^AK\r:kC=^AL\r:\
+ :kD=^AM\r:kE=^AN\r:kF=^AO\r:kb=^H:kd=\E[B:kh=\E[f:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[1C:nw=^M^J:se=\E[m:\
+ :sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[1A:us=\E[4m:
+# (altos3: had extension capabilities
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+# :HL=^AP\r:SP=\E[i:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
+altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V:\
+ :mb=\E[5p:me=\E[p:sr=\EM:tc=altos2:
+altos4|alt4|altos-4|altos IV:\
+ :tc=wy50:
+# (altos7: had extension capabilities:
+# :GG#0:GI=\EH8:GF=\EH7:\
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys. I have renamed them to keys 32 and up accordingly. I have
+# also made this entry relative to adm12 in order to give it an :sa:. The
+# <invis> imported by use=adm+sgr may work, let me know. -- esr)
+altos7|alt7|altos VII:\
+ :am:mi:\
+ :co#80:li#24:sg#0:\
+ :*5=^Am\r:*8=^An\r:FM=^A`\r:FN=^Aa\r:FO=^Ab\r:FP=^Ac\r:\
+ :FQ=^Ad\r:FR=^Ae\r:FS=^Af\r:FT=^Ag\r:FU=^Ah\r:FV=^Ai\r:\
+ :FW=^Aj\r:FX=^Ak\r:ac=j5k3l2m1n8q\072t4u9v=w0x6:al=\EE:\
+ :cd=\EY:ce=\ET:cl=\E+^^:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
+ :do=^J:ei=\Er:ho=^^:im=\Eq:\
+ :is=\E`\072\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2:k0=^AI\r:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=^AJ\r:kB=^AK\r:kC=^AL\r:\
+ :kD=^AM\r:kE=^AN\r:kF=^AO\r:kN=\EK:kP=\EJ:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:md=\EGt:mh=\EGp:mk=\EG1:\
+ :nd=^L:nw=^M^J:pf=\EJ:po=\Ed#:sf=^J:sr=\Ej:ta=^I:up=^K:\
+ :tc=adm+sgr:
+altos7pc|alt7pc|altos PC VII:\
+ :@7=\ET:tc=altos7:
+
+#### Hewlett-Packard (hp)
+#
+# Hewlett-Packard
+# 8000 Foothills Blvd
+# Roseville, CA 95747
+# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
+# 1-(800)-633-3600 (General customer support)
+#
+#
+# As of March 1998, HP no longer has any terminals in production.
+# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
+# supported (they still have parts). So are the 2392a and 2394a.
+# See the WORKSTATION CONSOLES section for the 700s.
+#
+
+# Generic HP terminal - this should (hopefully) work on any HP terminal.
+hpgeneric|hp|hewlett-packard generic terminal:\
+ :am:bs:da:db:mi:pt:xs:\
+ :co#80:li#24:lm#0:vt#6:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\
+ :cm=6\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=\EP:dl=\EM:\
+ :do=^J:ei=\ER:im=\EQ:kB=\Ei:kb=^H:le=^H:me=\E&d@:nd=\EC:\
+ :se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
+ :us=\E&dD:
+
+hp110|hewlett-packard model 110 portable:\
+ :li#16:tc=hpgeneric:
+
+hp+pfk+cr|hp function keys with CR:\
+ :k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:\
+ :k7=\Ev\r:k8=\Ew\r:
+
+hp+pfk-cr|hp function keys w/o CR:\
+ :k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:
+
+# The hp2621s use the same keys for the arrows and function keys,
+# but not separate escape sequences. These definitions allow the
+# user to use those keys as arrow keys rather than as function
+# keys.
+hp+pfk+arrows|hp alternate arrow definitions:\
+ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:kF=\Er\r:kH=\Eq\r:kR=\Es\r:\
+ :kd=\Ew\r:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:ku=\Et\r:
+
+hp+arrows|hp arrow definitions:\
+ :kF=\ES:kH=\EF:kR=\ET:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:ku=\EA:
+
+# Generic stuff from the HP 262x series
+#
+hp262x|HP 262x terminals:\
+ :xs:\
+ :cd=\EJ:dc=2\EP:ip=2:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:\
+ :kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kd=\EB:ke=\E&s0A:\
+ :kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:mb=\E&dA:me=\E&d@:\
+ :mk=\E&dS:mr=\E&dB:se=\E&d@:sf=\ES:so=\E&dB:ta=2\011:\
+ :ue=\E&d@:us=\E&dD:
+
+# Note: no :ho: on HPs since that homes to top of memory, not screen.
+# Due to severe 2621 braindamage, the only way to get the arrow keys to
+# transmit anything at all is to turn on the function key labels
+# with :ks:, and even then the user has to hold down shift!
+# The default 2621 turns off the labels except when it has to to
+# enable the function keys. If your installation prefers labels
+# on all the time, or off all the time (at the "expense" of the
+# function keys), use 2621-nl or 2621-wl.
+#
+# Note: there are newer ROMs for 2621's that allow you to set
+# strap A so the regular arrow keys xmit \EA, etc, as with the
+# 2645. However, even with this strap set, the terminal stops
+# xmitting if you reset it, until you unset and reset the strap!
+# Since there is no way to set/unset the strap with an escape
+# sequence, we don't use it in the default.
+# If you like, you can use 2621-ba (brain-damaged arrow keys).
+hp2621-ba|2621 w/new rom and strap A set:\
+ :ke@:ks@:tc=hp+arrows:tc=hp2621:
+
+# hp2621 with function labels. Most of the time they are off,
+# but inside vi, the function key labels appear. You have to
+# hold down shift to get them to xmit.
+hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels:\
+ :is=\E&jA\r:ke=\E&jA:tc=hp2621-fl:
+hp2621-fl|hp 2621:\
+ :xo:xs@:\
+ :pb#19200:\
+ :bt=\Ei:cm=\E&a%r%dc%dY:dc=2\EP:ip=2:is=\E&j@\r:ke=\E&j@:\
+ :ks=\E&jB:me=\E&d@:se=\E&d@:so=\E&dD:ta=2\011:ue=\E&d@:\
+ :us=\E&dD:tc=hp+pfk+cr:tc=hpgeneric:
+
+# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
+hp2621p|hp 2621 with printer:\
+ :pf=\E&p13C:po=\E&p11C:tc=hp2621:
+
+hp2621p-a|hp2621p with fn as arrows:\
+ :tc=hp+pfk+arrows:tc=hp2621p:
+
+# hp2621 with k45 keyboard
+hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard:\
+ :kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:\
+ :ku=\EA:tc=hp2621:
+
+# 2621 using all 48 lines of memory, only 24 visible at any time.
+hp2621-48|48 line 2621:\
+ :li#48:\
+ :cm=\E&a%r%dc%dR:cv=\E&a%dR:ho=\EH:tc=hp2621:
+
+# 2621 with no labels ever. Also prevents vi delays on escape.
+hp2621-nl|hp 2621 with no labels:\
+ :kd@:ke@:kh@:kl@:kr@:ks@:ku@:tc=hp2621-fl:
+
+# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
+# (wrong).
+#
+hp2621-nt|hp 2621 w/no tabs:\
+ :ta@:tc=hp2621:
+
+# Hp 2624 B with 4 or 10 pages of memory.
+#
+# Some assumptions are made with this entry. These settings are
+# NOT set up by the initialization strings.
+#
+# Port Configuration
+# RecvPace=Xon/Xoff
+# XmitPace=Xon/Xoff
+# StripNulDel=Yes
+#
+# Terminal Configuration
+# InhHndShk=Yes
+# InhDC2=Yes
+# XmitFnctn(A)=No
+# InhEolWrp=No
+#
+# Note: the 2624 DOES have a true :ho:, believe it or not!
+#
+# The 2624 has an "error line" to which messages can be sent.
+# This is CLOSE to what is expected for a "status line". However,
+# after a message is sent to the "error line", the next carriage
+# return is EATEN and the "error line" is turned back off again!
+# So I guess we can't define :hs:, :es:, :ws:, :ds:, :fs:, :ts:.
+#
+# This entry supports emacs (and any other program that uses raw
+# mode) at 4800 baud and less. I couldn't get the padding right
+# for 9600.
+#
+# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
+hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B:\
+ :da:db:\
+ :lm#96:\
+ :vb=\E&w13F\E&w12F\E&w13F\E&w12F:tc=hp+labels:tc=scrhp:
+
+# This hp2626 entry does not use any of the fancy windowing stuff
+# of the 2626.
+#
+# Indeed, terminfo does not yet handle such stuff. Since changing
+# any window clears memory, it is probably not possible to use
+# this for screen opt.
+#
+# ed is incredibly slow most of the time - I am guessing at the
+# exact padding. Since the terminal uses xoff/xon this is intended
+# only for cost computation, so that the terminal will prefer el
+# or even dl1 which is probably faster!
+#
+# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
+# extra slow on the last line of the window.
+#
+# The padding probably should be changed.
+#
+hp2626|hp2626a|hp2626p|hp 2626:\
+ :da:db:\
+ :lm#0:pb#19200:\
+ :SF=\E&r%dD:SR=\E&r%dU:cd=\ED\EJ\EC:ip=4:is=\E&j@\r:\
+ :tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
+
+# This entry is for sysline. It allocates a 23 line window with
+# a 115 line workspace for regular use, and a 1 line window for
+# the status line.
+#
+# This assumes port 2 is being used.
+# Turn off horizontal line, Create ws #1 with 115 lines,
+# Create ws #2 with 1 line, Create window #1 lines 1-23,
+# Create window #2 lines 24-24, Attach cursor to workspace #1.
+# Note that this clears the tabs so it must be done by tset before
+# it sets the tabs.
+#
+hp2626-s|hp 2626 using only 23 lines:\
+ :es:hs:\
+ :li#23:\
+ :fs=\E&d@\E&w7f2p1I\E&w4f1I:\
+ :i1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r:\
+ :ts=\E&w7f2p2I\E&w4f2I\r\EK\E&a%dC:tc=hp2626:
+# Force terminal back to 24 lines after being 23.
+hp2626-ns|hp 2626 using all 24 lines:\
+ :i1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r:\
+ :tc=hp2626:
+# Various entries useful for small windows on 2626.
+hp2626-12|hewlett-packard 2626 12 lines:\
+ :li#12:tc=hp2626:
+hp2626-12x40|hewlett-packard 2626 12 lines 40 columns:\
+ :co#40:li#12:tc=hp2626:
+hp2626-x40|hewlett-packard 2626 40 columns:\
+ :co#40:tc=hp2626:
+hp2626-12-s|hewlett-packard 2626 11 lines plus status:\
+ :li#11:tc=hp2626-s:
+
+#
+# hp2627 color tubes from University of Wisconsin
+#
+hp2627a-rev|hp 2627 with reverse video colors:\
+ :cr=^M:do=^J:\
+ :is=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r:\
+ :kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:ue=\E&v0S\E&d@:\
+ :us=\E&dD\E&v1S:tc=hp2621-nl:
+hp2627a|hp 2627 color terminal with no labels:\
+ :cr=^M:do=^J:\
+ :is=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r:\
+ :kb=^H:kd=^J:kl=^H:nw=^M^J:se=\E&v0S:sf=^J:so=\E&v2S:ta=^I:\
+ :ue=\E&v0S\E&d@:us=\E&dD\E&v1S:tc=hp2621-nl:
+hp2627c|hp 2627 color (cyan) terminal with no labels:\
+ :cr=^M:do=^J:\
+ :is=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r:\
+ :kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=hp2627a:
+
+# hp2640a doesn't have the Y cursor addressing feature, and C is
+# memory relative instead of screen relative, as we need.
+#
+hp2640a|hp 2640a:\
+ :cm@:ke@:ks@:tc=hp2645:
+
+hp2640b|hp2644a|hp 264x series:\
+ :ke@:ks@:tc=hp2645:
+
+# (hp2641a: removed unknown :gu: -- esr)
+hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry:\
+ :am:da:db:mi:xs:\
+ :co#80:li#24:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%2C:cl=\EH\EJ:\
+ :cm=\E&a%r%2c%2Y:cr=^M:cv=\E&a%2Y:dc=\EP:dl=\EM:do=^J:\
+ :ei=\ER:if=/usr/share/tabset/std:im=\EQ:is=500\EE:kb=^H:\
+ :kd=^J:kl=^H:le=^H:nd=\EC:nw=^M^J:se=\E&d@:sf=^J:so=\E&dB:\
+ :ta=^I:up=\EA:
+
+# This terminal should be used at 4800 baud or less. It needs padding for
+# plain characters at 9600, I guessed at an appropriate cr delay. It really
+# wants ^E/^F handshaking, but that doesn't work well even if you write
+# software to support it.
+hp2645|hp45|HP 2645 series:\
+ :pb#9600:\
+ :cr=20\r:kA=\EL:kD=\EP:kE=\EK:kF=\ES:kI=\EQ:kL=\EM:kM=\ER:\
+ :kN=\EU:kP=\EV:kR=\ET:kS=\EJ:kT=\E1:kd=\EB:ke=\E&s0A:kh=\Eh:\
+ :kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:mb=\E&dA:me=\E&d@:\
+ :mh=\E&dH:mr=\E&dB:us=\E&dD:tc=hpgeneric:
+# You should use this terminal at 4800 baud or less.
+hp2648|hp2648a|HP 2648a graphics terminal:\
+ :cl=50\EH\EJ:cm=20\E&a%r%dc%dY:dc=7\EP:ip=5:tc=hp2645:
+
+# The HP 150 terminal is a fairly vanilla HP terminal, with the
+# clreol standout problem. It also has graphics capabilities and
+# a touch screen, which we don't describe here.
+hp150|hewlett packard Model 150:\
+ :bs:tc=hp2622:
+
+# HP 2382a terminals, "the little ones." They don't have any
+# alternate character set support and sending out ^N/^O will
+# leave the screen blank.
+hp2382a|hp2382|hewlett packard 2382a:\
+ :da:db:\
+ :lh#1:lm#48:\
+ :ac@:ae@:as@:me=\E&d@:tc=hp+labels:tc=scrhp:
+
+hp2621-a|hp2621a-a|hp2621 with fn as arrows:\
+ :tc=hp+pfk+arrows:tc=hp2621-fl:
+
+# newer hewlett packard terminals
+
+newhpkeyboard|generic entry for HP extended keyboard:\
+ :kA=\EL:kB=\Ei:kC=\EJ:kD=\EP:kE=\EK:kF=\ET:kH=\EF:kI=\EQ:\
+ :kL=\EM:kM=\ER:kN=\EU:kP=\EV:kR=\ES:kS=\EJ:kb=^H:kd=\EB:\
+ :ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\
+ :tc=hp+pfk-cr:
+
+newhp|generic entry for new hewlett packard terminals:\
+ :am:bw:mi:xo:xs:\
+ :co#80:li#24:pb#4800:\
+ :ac=2[3@4>5I9(\072'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\072Y+Z*dHjGkTlRmFn/q,t5u6v8w7x.:\
+ :ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:cr=^M:ct=\E3:\
+ :dc=2\EP:dl=\EM:do=^J:ei=\ER:i1=8\E&jB:im=\EQ:ip=2:le=^H:\
+ :mb=\E&dA:md=\E&dF:me=\E&d@:mh=\E&dH:mk=\E&dS:mr=\E&dB:\
+ :nd=\EC:nw=^M^J:r1=\Eg:se=\E&d@:sf=^J:so=\E&dJ:sr=\ET:\
+ :st=\E1:ta=2\011:ue=\E&d@:up=\EA:us=\E&dD:\
+ :tc=newhpkeyboard:
+
+memhp|memory relative addressing for new HP ttys:\
+ :vt#6:\
+ :CM=\E&a%dr%dC:DO=\E&a+%dR:LE=\E&a-%dC:RI=\E&a+%dC:\
+ :UP=\E&a-%dR:ch=\E&a%dC:cl=40\EH\EJ:cm=\E&a%dr%dC:\
+ :cv=\E&a%dR:ho=\EH:ll=\E&a23R\r:tc=newhp:
+
+scrhp|screen relative addressing for new HP ttys:\
+ :CM=\E&a%dr%dC:DO=\E&a+%dR:LE=\E&a-%dC:RI=\E&a+%dC:\
+ :UP=\E&a-%dR:ch=\E&a%dC:cl=40\E&a0c0Y\EJ:\
+ :cm=10\E&a%dy%dC:cv=\E&a%dY:ho=\E&a0y0C:ll=\E&a0y0C\EA:\
+ :tc=newhp:
+
+# (hp+labels: added label values from a BRL termcap -- esr)
+hp+labels|"standard" label info for new HP ttys:\
+ :Nl#8:lh#2:lw#8:\
+ :LF=\E&j@:LO=\E&jB:l0=f1:l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:\
+ :l7=f8:
+
+hp+printer|"standard" printer info for HP ttys:\
+ :ff=\E&p4u0C:pf=\E&p13C:po=\E&p11C:ps=\EH\E&p4dF:
+
+
+# The new hp2621b is kind of a cross between the old 2621 and the
+# new 262x series of machines. It has dip-switched options.
+# The firmware has a bug in it such that if you give it a null
+# length label, the following character is eaten!
+hp2621b|hp 2621b with old style keyboard:\
+ :Nl#8:lh#1:lm#48:lw#8:\
+ :LO=\E&jB:kF=\ET:kH=\EF:kR=\ES:kd=\EB:kh=\Eh:kl=\ED:kr=\EC:\
+ :ku=\EA:tc=hp2621:
+
+hp2621b-p|hp 2621b with printer:\
+ :tc=hp+printer:tc=hp2621b:
+
+# hp2621b - new 2621b with new extended keyboard
+# these are closer to the new 26xx series than the other 2621b
+hp2621b-kx|hp 2621b with extended keyboard:\
+ :tc=newhpkeyboard:tc=hp2621b:
+
+hp2621b-kx-p|hp 2621b with new keyboard & printer:\
+ :tc=hp+printer:tc=hp2621b-kx:
+
+# Some assumptions are made in the following entries.
+# These settings are NOT set up by the initialization strings.
+#
+# Port Configuration
+# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
+#
+# Terminal Configuration
+# InhHndShk(G)=Yes InhDC2(H)=Yes
+# XmitFnctn(A)=No InhEolWrp=No
+#
+#
+# Hp 2622a & hp2623a display and graphics terminals
+#
+hp2622|hp2622a|hp 2622:\
+ :da:db:\
+ :lm#0:pb#19200:\
+ :is=\E&dj@\r:tc=hp+pfk+cr:tc=hp+labels:tc=scrhp:
+
+# The 2623 is a 2622 with extra graphics hardware.
+hp2623|hp2623a|hp 2623:\
+ :tc=hp2622:
+
+hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer:\
+ :tc=hp+printer:tc=hp2624:
+
+# The hewlett packard B can have an optional extra 6 pages of memory.
+hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory:\
+ :lm#240:tc=hp2624:
+
+hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer:\
+ :lm#240:tc=hp2624b-p:
+
+# Color manipulations for HP terminals
+hp+color|hp with colors:\
+ :cc:\
+ :Co#16:NC#17:pa#7:\
+ :oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I:\
+ :op=\E&v0S:sp=\E&v%dS:
+
+# :is: sets the screen to be 80 columns wide
+hp2397a|hp2397|hewlett packard 2397A color terminal:\
+ :is=\E&w6f80X:tc=memhp:tc=hp+labels:tc=hp+color:
+
+# HP 700/44 Setup parameters:
+# Terminal Mode HP-PCterm
+# Inhibit Auto Wrap NO
+# Status Line Host Writable
+# PC Character Set YES
+# Twenty-Five Line Mode YES
+# XON/XOFF @128 or 64 (sc)
+# Keycode Mode NO or YES (sc)
+# Backspace Key BS or BS/DEL
+#
+# :is: sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
+# \E\\? does not turn off keycode mode
+# <smsc> sets alternate start/stop; keycode on
+hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode:\
+ :am:eo:xn:xo:\
+ :co#80:li#25:\
+ :@7=\E[4~:RA=\E[?7l:S4=250\E[>11h\EPO**x0/65;1/67\E\\:\
+ :S5=\E[>11l\EP1**x0/11;1/13\E[m\E\\:SA=\E[?7h:XF=g:XN=e:\
+ :ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
+ :ic=\E[@:im=:\
+ :is=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\:\
+ :k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
+ :k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:\
+ :kB=\E[Z:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[1~:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=\E[D:me=\E[m:nd=\E[C:se=\E[m:sf=^J:\
+ :so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
+ :vi=\E[?25l:
+#
+# (hp2392: copied :ei: here from hpex -- esr)
+hp2392|239x series:\
+ :co#80:\
+ :bt=\Ei:cm=\E&a%dy%dC:cv=\E&a%dY:ei=\ER:im=\EQ:k1=\Ep\r:\
+ :k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
+ :k8=\Ew\r:kF=\EU:kN=\Eu:kP=\Ev:kR=\EV:kh=\Eh:ue=\E&d@:\
+ :us=\E&dD:tc=hpsub:
+
+hpsub|hp terminals -- capability subset:\
+ :am:da:db:mi:xo:xs:\
+ :li#24:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:cr=^M:\
+ :dc=\EP:dl=\EM:do=\EB:if=/usr/share/tabset/stdcrt:\
+ :is=\E&s1A\E<\E&k0\\:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:\
+ :kr=\EC:ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:se=\E&d@:\
+ :sf=^J:so=\E&dB:ta=^I:up=\EA:
+
+# hpex:
+# May be used for most 24 x 80 hp terminals,
+# but has no padding added, so may allow runover in some terminals at high
+# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
+# hp98x5 terminal emulators or hp98x6 consoles.
+# Adds xy-cursor addressing, vertical cursor addressing, home,
+# last line, and underline capabilities.
+#
+# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
+# moved :ei: here from hpsub -- esr)
+hpex|hp extended capabilites:\
+ :cm=\E&a%dy%dC:cr=^M:cv=\E&a%dY:do=^J:ei=\ER:im=\EQ:kb=^H:\
+ :kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:ue=\E&d@:us=\E&dD:tc=hpsub:
+
+# From: Ville Sulko <[email protected]>, 05 Aug 1996
+hp2|hpex2|hewlett-packard extended capabilities newer version:\
+ :am:da:db:mi:xs:\
+ :Nl#8:co#80:lh#2:li#24:lm#0:lw#8:sg#0:ug#0:\
+ :LF=\E&j@:LO=\E&jB:al=\EL:bl=^G:cd=\EJ:ce=\EK:ch=\E&a%dC:\
+ :cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
+ :dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
+ :k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
+ :kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
+ :kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
+ :kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:me=\E&d@\017:\
+ :ml=\El:mu=\Em:nd=\EC:se=\E&d@:sf=^J:so=\E&dB:st=\E1:ta=^I:\
+ :ue=\E&d@:up=\EA:us=\E&dD:
+
+# HP 236 console
+# From: <[email protected]>
+hp236|hp236 internal terminal emulator:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\EG:ce=\EK:cl=\EF:cm=\EE%+ %+ :dc=\EJ:dl=\EH:ei=:ic=\EI:\
+ :im=:le=^H:me=\ECI:se=\ECI:so=\EBI:up=^K:ve=\EDE:vs=\EDB:
+
+# This works on a hp300 console running Utah 4.3 BSD
+# From: Craig Leres <[email protected]>
+hp300h|HP Catseye console:\
+ :am:bs:da:db:mi:xs:\
+ :co#128:li#51:lm#0:sg#0:ug#0:\
+ :al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\
+ :cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
+ :dc=\EP:dl=\EM:do=\EB:ei=\ER:if=/usr/share/tabset/stdcrt:\
+ :im=\EQ:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\
+ :ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:se=\E&d@:sf=^J:\
+ :so=\E&dB:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
+# From: Greg Couch <[email protected]>
+hp9837|hp98720|hp98721|HP 9000/300 workstations:\
+ :am:bs:da:db:mi:xs:\
+ :co#128:it#8:li#46:lm#0:\
+ :al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:\
+ :cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:ct=\E3:cv=\E&a%dY:dc=\EP:\
+ :dl=\EM:do=\EB:ei=\ER:im=\EQ:is=\E&v0m1b0i&j@:kA=\EL:\
+ :kD=\EP:kE=\EK:kI=\EQ:kL=\EM:kN=\EU:kP=\EV:kS=\EJ:kb=^H:\
+ :kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:ks=\E&s1A:ku=\EA:\
+ :le=^H:me=\E&d@:nd=\EC:se=\E&v0S:sf=^J:so=\E&v5S:st=\E1:\
+ :ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
+# HP 9845 desktop computer from BRL
+# (hp9845: removed unknown capability :gu: -- esr)
+hp9845|HP 9845:\
+ :am:bs:da:db:eo:mi:xs:\
+ :co#80:li#21:\
+ :al=\EL:bc=\ED:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E&a%r%2c%2Y:\
+ :dc=\EP:dl=\EM:do=\EB:ei=\ER:if=/usr/share/tabset/std:\
+ :im=\EQ:le=\ED:nd=\EC:se=\E&d@:so=\E&dB:up=\EA:
+# From: Charles A. Finnell of MITRE <[email protected]>, developed 07SEP90
+# (hp98550: replaced /usr/share/tabset/9837 with std because :it#8:,:st=\E1:;
+# added empty <acsc> to avoid warnings re :as:/:ae: --esr)
+hp98550|hp98550a|HP 9000 Series 300 color console:\
+ :am:bs:da:db:mi:xs:\
+ :co#128:it#8:li#49:lm#0:\
+ :ac=:ae=^O:al=\EL:as=^N:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:\
+ :ch=\E&a%dC:cl=\EH\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:\
+ :cv=\E&a%dY:dc=\EP:dl=\EM:do=^J:ei=\ER:\
+ :if=/usr/share/tabset/std:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
+ :k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
+ :kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
+ :kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
+ :kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:\
+ :md=\E&dJ:me=\E&d@:mh=\E&dH:mk=\E&ds:mr=\E&dJ:nd=\EC:\
+ :se=\E&d@:sf=^J:so=\E&dJ:st=\E1:ta=^I:ue=\E&d@:up=\EA:\
+ :us=\E&dD:ve=\E*dQ:vi=\E*dR:
+# From: Victor Duchovni <[email protected]>
+# (hp700-wy: removed obsolete ":nl=^J:";
+# replaced /usr/share/tabset/hp700-wy with std because :it#8:,:st=\E1: -- esr)
+hp700-wy|HP700/41 emulating wyse30:\
+ :am:bs:bw:mi:ms:\
+ :co#80:it#8:li#24:sg#1:ug#1:\
+ :al=0.7*\EE:bt=\EI:cd=\EY:ce=10\ET:cl=^Z:cm=\E=%+ %+ :\
+ :cr=^M:ct=\E0:cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ei=\Er:ho=^^:\
+ :i1=\E~"\EC\Er\E(\EG0\003\E`9\E`1:\
+ :if=/usr/share/tabset/stdcrt:im=\Eq:kB=\EI:kC=^Z:kE=\ET:\
+ :kI=\Eq:kM=\Er:kS=\EY:kT=\EI:kb=\177:kd=^V:kh=^^:kl=^H:kr=^L:\
+ :ku=^K:le=^H:ll=^^^K:me=10\EG0:nd=^L:se=10\EG0:so=10\EG4:\
+ :sr=\Ej:st=\E1:ta=^I:ue=10\EG0:up=^K:us=10\EG8:
+hp70092|hp70092a|hp70092A|HP 700/92:\
+ :am:da:db:xs:\
+ :Nl#8:co#80:lh#2:li#24:lm#0:lw#8:\
+ :LF=\E&j@:LO=\E&jB:ac=0cjgktlrmfn/q,t5u6v8w7x.:ae=^O:\
+ :al=\EL:as=^N:bl=^G:bt=\Ei:ce=\EK:ch=\E&a%dC:\
+ :cl=\E&a0y0C\EJ:cm=\E&a%dy%dC:cr=^M:ct=\E3:cv=\E&a%dY:\
+ :dc=\EP:dl=\EM:do=\EB:ei=\ER:im=\EQ:k1=\Ep:k2=\Eq:k3=\Er:\
+ :k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kA=\EL:kC=\EJ:kD=\EP:\
+ :kE=\EK:kF=\ES:kH=\EF:kI=\EQ:kL=\EM:kM=\ER:kN=\EU:kP=\EV:\
+ :kR=\ET:kS=\EJ:kT=\E1:ka=\E3:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:\
+ :kl=\ED:kr=\EC:ks=\E&s1A:kt=\E2:ku=\EA:le=^H:mb=\E&dA:\
+ :md=\E&dB:me=\E&d@:mh=\E&dH:mr=\E&dB:nd=\EC:se=\E&d@:\
+ :so=\E&dJ:sr=\ET:st=\E1:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
+
+bobcat|sbobcat|HP 9000 model 300 console:\
+ :am:da:db:mi:xs:\
+ :co#128:it#8:li#47:sg#0:ug#0:\
+ :al=10*\EL:bt=\Ei:cd=\EJ:ce=\EK:ch=6\E&a%dC:cl=\EH\EJ:\
+ :cm=6\E&a%dy%dC:cr=^M:cv=6\E&a%dY:dc=\EP:dl=10*\EM:do=\EB:\
+ :ei=\ER:im=\EQ:kb=^H:kd=\EB:ke=\E&s0A:kh=\Eh:kl=\ED:kr=\EC:\
+ :ks=\E&s1A:ku=\EA:le=^H:me=\E&d@:nd=\EC:nw=^M^J:se=\E&d@:\
+ :sf=^J:so=\E&dB:ta=^I:ue=\E&d@:up=\EA:us=\E&dD:
+gator-t|HP 9000 model 237 emulating extra-tall AAA:\
+ :li#94:tc=gator:
+gator|HP 9000 model 237 emulating AAA:\
+ :bw:km:mi:ul:\
+ :co#128:it#8:li#47:\
+ :AL=1*\E[%dL:DC=4\E[%dP:DL=1*\E[%dM:IC=4\E[%d@:al=\E[L:\
+ :bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:\
+ :ic=\E[@:im=:kb=^H:kd=^J:kl=^H:le=^H:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:nw=^M^J:rp=1*%.\E[%db:se=\E[m:so=\E[7m:ta=^I:\
+ :ue=\E[m:up=\EM:us=\E[4m:
+gator-52|HP 9000 model 237 emulating VT52:\
+ :co#128:li#47:tc=vt52:
+gator-52t|HP 9000 model 237 emulating extra-tall VT52:\
+ :li#94:tc=gator-52:
+
+#### Honeywell-Bull
+#
+# From: Michael Haardt <[email protected]> 11 Jan 93
+#
+
+# Honeywell Bull terminal. Its cursor and function keys send single
+# control characters and it has standout/underline glitch. Most programs
+# do not like these features/bugs. Visual bell is realized by flashing the
+# "keyboard locked" LED.
+dku7003-dumb|Honeywell Bull DKU 7003 dumb mode:\
+ :co#80:li#25:\
+ :cd=^_:ce=\E[K:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:do=^K:ho=^]:\
+ :kb=^H:kd=^K:kh=^]:kl=^Y:kr=^X:ku=^Z:le=^Y:nd=^X:nw=^M^J:\
+ :sf=^J:ta=^I:up=^Z:vb=\E[2h\E[2l:
+dku7003|Honeywell Bull DKU 7003 all features described:\
+ :ms:\
+ :sg#1:ug#1:\
+ :mb=\E[5m:md=\E[7m:me=\E[m:mh=\E[2m:mr=\E[7m:se=\E[m:\
+ :so=\E[7m:ue=\E[m:us=\E[4m:tc=dku7003-dumb:
+
+#### Lear-Siegler (adm)
+#
+# These guys are long since out of the terminals business, but
+# in 1995 many current terminals still have an adm type as one of their
+# emulations (usually their stupidest, and usually labeled adm3, though
+# these `adm3' emulations normally have adm3a+ capabilities).
+#
+# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
+# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
+# was being held to ground would trigger a send of the top line on the screen.
+# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
+# hanging in the air. (Thanks to Eric Fischer, <[email protected]>,
+# for clearing up this point.)
+
+adm1a|adm1|lsi adm1a:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cl=1\E;:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:le=^H:nd=^L:\
+ :sf=^J:up=^K:
+adm2|lsi adm2:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:\
+ :dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:\
+ :kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
+# (adm3: removed obsolete ":ma=^K^P:" -- esr)
+adm3|lsi adm3:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cl=^Z:cr=^M:do=^J:le=^H:sf=^J:
+# The following ADM-3A switch settings are assumed for normal operation:
+# SPACE U/L_DISP CLR_SCRN 24_LINE
+# CUR_CTL LC_EN AUTO_NL FDX
+# Other switches may be set for operator convenience or communication
+# requirements. I recommend
+# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
+# ETX_OFF EOT_OFF
+# Most of these terminals required an option ROM to support lower case display.
+# Open the case and look at the motherboard; if you see an open 24-pin DIP
+# socket, you may be out of luck.
+#
+# (adm3a: some capabilities merged in from BRl entry -- esr)
+adm3a|lsi adm3a:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cl=1\032:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:kd=^J:kl=^H:\
+ :kr=^L:ku=^K:le=^H:ma=^K^P:nd=^L:nl=^J:rs=^N:sf=^J:up=^K:
+adm3a+|adm3a plus:\
+ :kb=^H:tc=adm3a:
+# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
+adm5|lsi adm5:\
+ :sg#1:\
+ :bl=^G:cd=\EY:ce=\ET:cr=^M:do=^J:kb=^H:kh=^^:se=\EG:so=\EG:\
+ :tc=adm3a+:
+# A lot of terminals other than adm11s use these. Wherever you see
+# use=adm+sgr with some of its capabilities disabled, try the
+# disabled ones. They may well work but not have been documented or
+# expressed in the using entry. We'd like to cook up an :sa: but the
+# :ae:/:as: sequences of the using entries vary too much.
+adm+sgr|adm style highlight capabilities:\
+ :me=\EG0:mk=\EG1:mr=\EG4:se=\EG0:so=\EG4:ue=\EG0:us=\EG8:
+# LSI ADM-11 from George William Hartwig, Jr. <[email protected]> via BRL
+# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
+# :kh: from <stephen%[email protected]>. :cl: could also
+# be ^Z, according to his entry.
+# (adm11: :us:=\EG4 was obviously erroneous because it also said
+# :mr:=\EG4. Looking at other ADMs confirms this -- esr)
+adm11|LSI ADM-11:\
+ :am:bs:hs:\
+ :co#80:kn#8:li#24:\
+ :bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:do=^J:ds=\Eh:\
+ :fs=\E(\r:ho=^^:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
+ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:mb=\EG2:nd=^L:nl=^J:nw=^M^J:ta=^I:\
+ :ts=\EF\E):up=^K:tc=adm+sgr:
+# From: Andrew Scott Beals <[email protected]>
+# Corrected by Olaf Siebert <[email protected]>, 11 May 1995
+# Supervisor mode info by Ari Wuolle, <[email protected]>, 27 Aug 1996
+# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
+# :is:=\Eq but that looked wrong; this :is: is from Dave Yost <esquire!yost>
+# via BRL. That entry asserted :sg#1:, but I've left that out because
+# neither earlier nor later ADMSs have it -- esr)
+#
+# You will need to get into the supervisor setup before you can set
+# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
+# see a lot more setup options.
+#
+# While in supervisor setup you can also use following codes:
+#
+# Ctrl-P Personality character selections (configure for example what
+# arrow keys send, if I recall correctly)
+# Ctrl-T tabs 1-80 use left&right to move and up to set and
+# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
+# Ctrl-B Binary setup (probably not needed. I think that everything can
+# be set using normal setup)
+# Ctrl-A Answerback mode (enter answerback message)
+# Ctrl-U User friendly mode (normal setup)
+# Ctrl-D Defaults entire setup and function keys from EPROM tables
+# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
+# Ctrl-R Reads both setup and functions keys from NVM.
+# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
+#
+# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
+# RTS/CTS used nowadays with virtually every modem and computer. 19200
+# bps works fine with hardware flow control.
+#
+# The following null-modem cable should fix this and enable you to use
+# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
+# set ADM-12+ for DTR handshaking from supervisor setup.
+#
+# PC Serial ADM-12+
+# -------- -------
+# 2 - 3
+# 3 - 2
+# 4 - 5
+# 5 - 20
+# 6,8 - 4
+# 7 - 7
+# 20 - 6,8
+#
+adm12|lsi adm12:\
+ :am:bs:mi:pt:\
+ :co#80:it#8:li#24:ug#1:\
+ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E0:\
+ :dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:ic=\EQ:im=\Eq:\
+ :is=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1:\
+ :k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\
+ :k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:\
+ :ku=^K:le=^H:nd=^L:st=\E1:up=^K:tc=adm+sgr:
+# (adm20: removed obsolete ":kn#7:" -- esr)
+adm20|lear siegler adm20:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:\
+ :cm=\E=%i%r%+^_%+^_:cr=^M:dc=\EW:dl=\ER:ei=:ho=^^:ic=\EQ:\
+ :im=:k1=^A:k2=^B:k3=^W:k4=^D:k5=^E:k6=^X:k7=^Z:le=^H:me=\E(:\
+ :nd=^L:se=\E(:so=\E):ta=^I:up=^K:
+adm21|lear siegler adm21:\
+ :sg#1:\
+ :al=30*\EE:bl=^G:cd=\EY:ce=\ET:cr=^M:dc=\EW:dl=30*\ER:do=^J:\
+ :ei=:ic=\EQ:im=:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:mk@:sf=^J:\
+ :tc=adm+sgr:tc=adm3a:
+# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
+# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
+# removed bogus-looking \200 from before :cm:. -- esr)
+adm22|lsi adm22:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\
+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\
+ :is=\E%\014\014\014\016\003\200\003\002\003\002\200\200\200\200\200\200\200\200\200\200\200:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:l1=F1:l2=F2:\
+ :l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:le=^H:me=\E(:nd=^L:se=\E(:\
+ :so=\E):ta=\Ei:up=^K:
+# ADM 31 DIP Switches
+#
+# This information comes from two versions of the manual for the
+# Lear-Siegler ADM 31.
+#
+# Main board:
+# rear of case
+# +-||||-------------------------------------+
+# + S1S2 ||S +
+# + ||3 +
+# + +
+# + ||S +
+# + ||4 +
+# + +
+# + +
+# + +
+# + +
+# + +
+# +-+ +-+
+# + +
+# + S5 S6 S7 +
+# + == == == +
+# +----------------------------------------------+
+# front of case (keyboard)
+#
+# S1 - Data Rate - Modem
+# S2 - Data Rate - Printer
+# ------------------------
+# Data Rate Setting
+# -------------------
+# 50 0 0 0 0
+# 75 1 0 0 0
+# 110 0 1 0 0
+# 134.5 1 1 0 0
+# 150 0 0 1 0
+# 300 1 0 1 0
+# 600 0 1 1 0
+# 1200 1 1 1 0
+# 1800 0 0 0 1
+# 2000 1 0 0 1
+# 2400 0 1 0 1
+# 3600 1 1 0 1
+# 4800 0 0 1 1
+# 7200 1 0 1 1
+# 9600 0 1 1 1
+# x 1 1 1 1
+#
+# S3 - Interface/Printer/Attributes
+# ---------------------------------
+# Printer Busy Control
+# sw1 sw2 sw3
+# ---------------
+# off off off Busy not active, CD disabled
+# off off on Busy not active, CD enabled
+# off on off Busy active on J5-20, CD disabled
+# on off off Busy active on J5-19, CD disabled - Factory Set.
+# on off on Busy active on J5-19, CD enabled
+#
+# sw4 Used in conjuction with S4 for comm interface control - Fact 0
+#
+# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
+#
+# sw6 ON enables printer BUSY active LOW - Factory Setting
+# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
+#
+# sw7 ON - steady cursor - Factory Setting
+# OFF - blinking cursor
+#
+# sw8 ON causes selected attribute character to be displayed
+# OFF causes SPACE to be displayed instead - Factory Setting
+#
+# S4 - Interface
+# --------------
+# Modem Interface
+# S3 S4 S4 S4 S4
+# sw4 sw1 sw2 sw3 sw4
+# ---------------------------
+# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
+# Current Loop disabled - Factory Setting
+# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
+# disabled
+# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
+# Current Loop Disabled
+#
+# sw5 ON disables dot stretching mode - Factory Setting
+# OFF enables dot stretching mode
+# sw6 ON enables blanking function
+# OFF enables underline function - Factory Setting
+# sw7 ON causes NULLS to be displayed as NULLS
+# OFF causes NULLS to be displayed as SPACES - Factory Setting
+#
+# S5 - Word Structure
+# -------------------
+# sw1 ON enables BREAK key - Factory Setting
+# OFF disables BREAK key
+# sw2 ON selects 50Hz monitor refresh rate
+# OFF selects 60Hz monitor refresh rate - Factory Setting
+#
+# Modem Port Selection
+# sw3 sw4 sw5
+# ---------------
+# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
+# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
+# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
+# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
+# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
+# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
+# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
+# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
+#
+# sw6 ON sends bit 8 a 1 (mark)
+# OFF sends bit 8 as 0 (space) - Factory Setting
+# sw7 ON selects Block Mode
+# OFF selects Conversation Mode - Factory Setting
+# sw8 ON selects Full Duplex operation
+# OFF selects Half Duplex operation - Factory Setting
+#
+# S6 - Printer
+# ------------
+# sw1, sw2, sw6, sw7 Reserved - Factory 0
+#
+# Printer Port Selection
+# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
+#
+# sw8 ON enables Printer Port
+# OFF disables Printer Port - Factory Setting
+#
+# S7 - Polling Address
+# --------------------
+# sw1-7 Establish ASCII character which designates terminal polling address
+# ON = logic 0
+# OFF = logic 1 - Factory Setting
+# sw8 ON enables Polling Option
+# OFF disables Polling Option - Factory Setting
+#
+#
+# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
+#
+# This adm31 entry uses underline as the standout mode.
+# If the adm31 gives you trouble with standout mode, check the DIP switch in
+# position 6, bank @c11, 25% from back end of the circuit board. Should be
+# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
+# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
+adm31|lsi adm31 with sw6 set for underline mode:\
+ :am:bs:mi:\
+ :co#80:li#24:\
+ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :cr=^M:\
+ :dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eu\E0:k0=^A0\r:\
+ :k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:k6=^A6\r:\
+ :k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:\
+ :me=\EG0:nd=^L:se=\EG0:sf=^J:so=\EG1:ue=\EG0:up=^K:us=\EG1:
+adm31-old|o31|old adm31:\
+ :so=\EG4:ue@:us@:tc=adm31:
+# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
+adm36|LSI ADM36:\
+ :bs:pt:\
+ :kn#4:\
+ :if=/usr/share/tabset/vt100:\
+ :is=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l:\
+ :tc=vt100:
+# (adm42: removed obsolete ":ma=^K^P:" -- esr)
+adm42|lsi adm42:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=270\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :\
+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:im=\Eq:ip=6*:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:pc=\177:sf=^J:ta=^I:ue@:\
+ :up=^K:us@:vs=\EC\E3 \E3(:tc=adm+sgr:
+# The following termcap for the Lear Siegler ADM-42 leaves the
+# "system line" at the bottom of the screen blank (for those who
+# find it distracting otherwise)
+adm42-ns|lsi adm-42 with no system line:\
+ :al=\EE\EF \011:bt=\EI\EF \011:cd=\EY\EF \011:\
+ :ce=\ET\EF \011:cl=\E;\EF \011:cm=\E=%+ %+ \EF \011:\
+ :dc=\EW\EF \011:dl=\ER\EF \011:ei=\Er\EF \011:\
+ :im=\Eq\EF \011:tc=adm42:
+# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
+# The insert mode of this terminal is commented out because it's broken for our
+# purposes in that it will shift the position of every character on the page,
+# not just the cursor line!
+# From: Michael Driscoll <[email protected]> 10 July 1996
+adm1178|1178|lsi adm1178:\
+ :am:\
+ :co#80:li#24:sg#1:ug#1:\
+ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :\
+ :cr=^M:dc=\EW:dl=\ER:do=^J:ho=^^:ip=6*:kb=^H:kd=^J:kl=^H:\
+ :le=^H:md=\E(:me=\E):mr=\EG4:nd=^L:nw=^M^J:pc=\177:se=\EG0:\
+ :sf=^J:so=\EG4:ta=^I:ue=\EG0:up=^K:us=\EG1:vs=\EC\E3 \E3(:
+
+#### Prime
+#
+# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
+# <[email protected]> on 14 Dec 1992 and lightly edited by esr.
+# Prime merged with ComputerVision in the late 1980s; you can reach them at:
+#
+# ComputerVision Services
+# 500 Old Connecticut Path
+# Framingham, Mass.
+#
+
+# Standout mode is dim reverse-video.
+pt100|pt200|wren|fenix|prime pt100/pt200:\
+ :am:bw:mi:ms:\
+ :co#80:it#8:li#24:\
+ :DC=\E[%dP:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :al=\E[L\E[t:bt=\E[Z:cd=\E[J\E[r:ce=\E[K\E[t:cl=\E?:\
+ :cm=\E0%+!%+!:cr=^M:dc=\E[P:dl=\E[M:do=\ED:ei=\E[4l:\
+ :ho=\E$B:im=\E[4h:kb=^H:kd=\E[B:ke=\E[>13l:kh=\E$A:kl=\E[D:\
+ :kr=\E[C:ks=\E[>13h:ku=\E[A:le=^H:me=\E[m:mh=\E[2m:nd=\E[C:\
+ :nw=^M^J:se=\E[m:sf=^J:so=\E[2;7m:ta=^I:te=:\
+ :ti=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q:\
+ :ue=\E[m:up=\EM:us=\E[4m:vb=\E$\E$P:
+pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode:\
+ :co#132:\
+ :cm=\E[%i%d;%dH:tc=pt100:
+pt250|Prime PT250:\
+ :se@:so@:tc=pt100:
+pt250w|Prime PT250 in 132-column mode:\
+ :se@:so@:tc=pt100w:
+
+#### Qume (qvt)
+#
+# Qume, Inc.
+# 3475-A North 1st Street
+# San Jose CA 95134
+# Vox: (800)-457-4447
+# Fax: (408)-473-1510
+# Net: [email protected] (Jose D'Oliveira)
+#
+# Qume was bought by Wyse, but still (as of early 1995) has its own support
+# group and production division.
+#
+# Discontinued Qume models:
+#
+# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
+# built to replace them, and a qvt119+ which was a 101+ with available wide
+# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
+# and an ANSI-compatible qvt203 that replaced it. Qume started producing
+# ANSI-compatible terminals with the qvt323 and qvt61.
+#
+# Current Qume models (as of February 1995):
+#
+# All current Qume terminals have ANSI-compatible operation modes.
+# Qume is still producing the qvt62, which features emulations for other
+# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
+# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
+# with many emulations including Wyse370, Wyse 325, etc. Their newest
+# model is the qvt520, which is vt420-compatible.
+#
+# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
+#
+# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
+# setup mode. Shift-s should be a configuration save to NVRAM.
+
+qvt101|qvt108|qume qvt 101 and QVT 108:\
+ :sg#1:tc=qvt101+:
+
+# This used to have :vs=\E.2: but no :ve: or :vi:. The BSD termcap
+# file had :vs=\EM4 \200\200\200:. I've done the safe thing and yanked
+# both. The :mr: is from BSD, which also claimed bold=\E( and dim=\E).
+# What seems to be going on here is that this entry was designed so that
+# the normal highlight is bold and standout is dim plus something else
+# (reverse-video maybe? But then, are there two :mr: sequences?)
+qvt101+|qvt101p|qume qvt 101 PLUS product:\
+ :am:bw:hs:ul:\
+ :co#80:li#24:sg#0:\
+ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
+ :ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=:fs=^M:ho=^^:\
+ :ic=\EQ:im=:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
+ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:\
+ :kB=\EI:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:\
+ :kr=^L:ku=^K:le=^H:mk@:nd=^L:pf=\EA:po=\E@:se=\E(:sf=^J:\
+ :so=\E0P\E):st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:ve=\E.4:\
+ :tc=adm+sgr:
+qvt102|qume qvt 102:\
+ :ve=\E.:tc=qvt101:
+# (qvt103: added <rmam>/<smam> based on init string -- esr)
+qvt103|qume qvt 103:\
+ :am:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[H\E[2J:\
+ :cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\
+ :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=^J:so=2\E[7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:
+qvt103-w|qume qvt103 132 cols:\
+ :co#132:li#24:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt103:
+qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals:\
+ :am:hs:mi:ms:\
+ :co#80:li#24:sg#0:ug#0:\
+ :al=\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E*1:cm=\E=%+ %+ :\
+ :cr=^M:ct=\E3:dc=\EW:dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:\
+ :ho=^^:im=\Eq:is=\EDF\EC\EG0\Er\E(\E%EX:k0=^AI\r:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:\
+ :ku=^K:le=^H:nd=^L:pf=\EA:po=\E@:sf=^J:sr=\EJ:st=\E1:ta=^I:\
+ :ts=\Eg\Ef:up=^K:us=\EG8:vb=\En0\En1:ve=\E.4:vs=\E.2:\
+ :tc=adm+sgr:
+qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines:\
+ :li#25:tc=qvt119+:
+qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode:\
+ :co#132:\
+ :is=\EDF\EC\EG0\Er\E(\E%\EX\En4:tc=qvt119+:
+qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25:\
+ :li#25:tc=qvt119+:
+qvt203|qvt203+|qume qvt 203 Plus:\
+ :al=99\E[L:dc=7\E[P:dl=99\E[M:ei=\E[4l:im=\E[4h:ip=7:\
+ :k0=\E[29~:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
+ :k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[28~:\
+ :sf=30\n:tc=qvt103:
+qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video):\
+ :co#132:li#24:\
+ :rs=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=qvt203:
+#
+# Since a command is present for enabling 25 data lines,
+# a specific terminfo entry may be generated for the 203.
+# If one is desired for the QVT 119 PLUS then 25 lines must
+# be selected in the status line (setup line 9).
+#
+qvt203-25|QVT 203 PLUS with 25 by 80 column mode:\
+ :co#80:li#25:\
+ :is=\E[=40h\E[?3l:tc=qvt203:
+qvt203-25-w|QVT 203 PLUS with 25 by 132 columns:\
+ :co#132:li#25:\
+ :rs=\E[?3h\E[=40h:tc=qvt203:
+
+#### Televideo (tvi)
+#
+# TeleVideo
+# 550 East Brokaw Road
+# PO Box 49048 95161
+# San Jose CA 95112
+# Vox: (408)-954-8333
+# Fax: (408)-954-0623
+#
+#
+# These require incredible amounts of padding.
+#
+# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
+# Televideo terminals are ANSI and PC-ANSI compatible.
+
+tvi803|televideo 803:\
+ :cl=10\E*:tc=tvi950:
+
+# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
+# Switch settings are:
+#
+# S1 1 2 3 4
+# D D D D 9600
+# D D D U 50
+# D D U D 75
+# D D U U 110
+# D U D D 135
+# D U D U 150
+# D U U D 300
+# D U U U 600
+# U D D D 1200
+# U D D U 1800
+# U D U D 2400
+# U D U U 3600
+# U U D D 4800
+# U U D U 7200
+# U U U D 9600
+# U U U U 19200
+#
+# S1 5 6 7 8
+# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
+# U D X U 7N2
+# U U D D 7O1
+# U U D U 7O2
+# U U U D 7E1
+# U U U U 7E2
+# D D X D 8N1
+# D D X U 8N2
+# D U D D 8O1
+# D U U U 8E2
+#
+# S1 9 Autowrap
+# U on
+# D off
+#
+# S1 10 CR/LF
+# U do CR/LF when CR received
+# D do CR when CR received
+#
+# S2 1 Mode
+# U block
+# D conversational
+#
+# S2 2 Duplex
+# U half
+# D full
+#
+# S2 3 Hertz
+# U 50
+# D 60
+#
+# S2 4 Edit mode
+# U local
+# D duplex
+#
+# S2 5 Cursor type
+# U underline
+# D block
+#
+# S2 6 Cursor down key
+# U send ^J
+# D send ^V
+#
+# S2 7 Screen colour
+# U green on black
+# D black on green
+#
+# S2 8 DSR status (pin 6)
+# U disconnected
+# D connected
+#
+# S2 9 DCD status (pin 8)
+# U disconnected
+# D duplex
+#
+# S2 10 DTR status (pin 20)
+# U disconnected
+# D duplex
+# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added :kh:, :le:, :do:,
+# :sf:, <hpa>, <vpa>, :am:, :ms: from SCO entry -- esr)
+tvi910|televideo model 910:\
+ :am:bs:ms:\
+ :co#80:it#8:li#24:sg#1:\
+ :bl=^G:bt=\EI:cd=\EY:ce=\ET:ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :\
+ :cr=^M:cv=\E[%+ :do=^J:ho=\E=\001\001:\
+ :if=/usr/share/tabset/stdcrt:k0=^AI\r:k1=^A@\r:k2=^AA\r:\
+ :k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
+ :k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:\
+ :sf=^J:ta=^I:up=^K:tc=adm+sgr:
+# From: Alan R. Rogers <rogers%albany@csnet-relay>
+# as subsequently hacked over by someone at SCO
+# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
+#
+# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
+#
+# S1 1 2 3 4:
+# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
+# D U D D 135 D U D U 150 D U U D 300 D U U U 600
+# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
+# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
+#
+# S1 5 6 7 8:
+# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
+# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
+# D U D D 8O1 D U U U 8E2
+#
+# S1 9 Autowrap (U = on, D = off)
+# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
+# S2 1 Mode (U = block, D = conversational)
+# S2 2 Duplex (U = half, D = full)
+# S2 3 Hertz (U = 50, D = 60)
+# S2 4 Edit mode (U = local, D = duplex)
+# S2 5 Cursor type (U = underline, D = block)
+# S2 6 Cursor down key (U = send ^J, D = send ^V)
+# S2 7 Screen colour (U = green on black, D = black on green)
+# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
+# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
+# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
+#
+tvi910+|televideo 910+:\
+ :al=33*\EE:dc=\EW:dl=33*\ER:ei=:ho=^^:ic=\EQ:im=:k0=^A@\r:\
+ :k1=^AA\r:k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:\
+ :k7=^AG\r:k8=^AH\r:k9=^AI\r:ll=\E=7\040:tc=tvi910:
+
+# (tvi912: removed obsolete ":ma=^K^P^L :", added :vb: and
+# :kh: from BRL entry -- esr)
+tvi912|tvi914|tvi920|old televideo 912/914/920:\
+ :am:bs:ms:pt:\
+ :co#80:it#8:li#24:sg#1:ug#1:\
+ :al=33*\EE:bl=^G:cd=\Ey:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
+ :ct=\E3:dc=\EW:dl=33*\ER:do=^J:ei=:ho=^^:ic=\EQ:\
+ :if=/usr/share/tabset/stdcrt:im=:k0=^AI\r:k1=^A@\r:\
+ :k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:\
+ :k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
+ :nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:ue=\Em:up=^K:us=\El:\
+ :vb=\Eb\Ed:
+# We got some new tvi912c terminals that act really weird on the regular
+# termcap, so one of our gurus worked this up. Seems that cursor
+# addressing is broken.
+tvi912cc|tvi912 at cowell college:\
+ :cm@:tc=tvi912c:
+
+# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
+# From: Benjamin C. W. Sittler
+#
+# Someone has put a scanned copy of the manual online at:
+# http://vt100.net/televideo/912b-om/
+#
+# These terminals were produced ca. 1979, and had a 12" monochrome
+# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
+# ASCII, and were generally similar to adm3a but with attributes
+# (including some with magic cookies), fancy half-duplex mode, and
+# different bugs.
+#
+# Some operations reqire truly incredible amounts of padding. The
+# insert_line (:al:) and delete_line (:dl:) operations in particular
+# are so slow as to be nearly unusable.
+#
+# There may or may not have been a separate, earlier series of 912/920
+# terminals (without the "B" and "C" suffix); I have never seen one,
+# and the manual only describes the "B" and "C" series. The 912 and 920
+# are quite distinct from the 914 and 924, which were much nicer non-
+# magic-cookie terminals similar to the 950.
+#
+# This is a new description for the following TeleVideo terminals,
+# distinguished chiefly by their keyboards:
+#
+# TVI-912B - very odd layout, no function keys (84 keys)
+# TVI-920B - typewriter layout, no function keys (103 keys)
+# TVI-912C - very odd layout, function keys F1-F11 (82 keys)
+# TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
+#
+# To choose a setting for the TERM variable, start with the model:
+#
+# Model || base name
+# ----------||-----------
+# TVI-912B || tvi912b
+# TVI-912C || tvi912c
+# TVI-920B || tvi920b
+# TVI-920C || tvi920c
+#
+# Then add a suffix from the following table describing installed options
+# and how you'd like to use the terminal:
+#
+# Use Video | Second | Visual | Magic | Page || feature
+# Attributes | Page | Bell | Cookies | Print || suffix
+# ------------|--------|--------|---------|-------||---------
+# No | No | N/A | N/A | No || -unk
+# No | No | N/A | N/A | Yes || -p
+# No | Yes | No | N/A | No || -2p-unk
+# No | Yes | No | N/A | Yes || -2p-p
+# No | Yes | Yes | N/A | No || -vb-unk
+# No | Yes | Yes | N/A | Yes || -vb-p
+# Yes | No | N/A | No | N/A ||
+# Yes | No | N/A | Yes | N/A || -mc
+# Yes | Yes | No | No | N/A || -2p
+# Yes | Yes | No | Yes | N/A || -2p-mc
+# Yes | Yes | Yes | No | N/A || -vb
+# Yes | Yes | Yes | Yes | N/A || -vb-mc
+#
+# So e.g. a model 920 C with second page memory option, visual bell
+# and no magic cookies would be tvi920c-vb; a model 912 B without the
+# second page memory option and using magic cookies would be
+# tvi912b-mc
+#
+# PADDING
+#
+# At 9600 baud, the terminal is prone to overflow its input buffer
+# during complex operations (insert/delete
+# character/line/screen/page), and it does not signal this over the
+# RS232 cable. The typical symptom of an overrun is that the terminal
+# starts beeping, and output becomes garbled.
+#
+# The padding delays in this terminfo were derived using tack(1)
+# running on a Linux box connected to a TVI-920C with a later-model
+# (A49C1-style) ROM running at 9600 baud, so your mileage may
+# vary. The numbers below seem to give the terminal enough time so
+# that it doesn't overflow its input buffer and start losing
+# characters.
+#
+# KEYS
+#
+# If you want to use the FUNCT key on a tvi912[bc], use the
+# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
+# the following table (these also work on the 920 series):
+#
+# Unshifted Function Keys:
+#
+# Key | capname|| Equivalent
+# -----|--------||------------
+# F1 | :k1: || FUNCT + @
+# F2 | :k2: || FUNCT + A
+# F3 | :k3: || FUNCT + B
+# F4 | :k4: || FUNCT + C
+# F5 | :k5: || FUNCT + D
+# F6 | :k6: || FUNCT + E
+# F7 | :k7: || FUNCT + F
+# F8 | :k8: || FUNCT + G
+# F9 | :k9: || FUNCT + H
+# F10 | <kf10> || FUNCT + I
+# F11 | <kf11> || FUNCT + J
+#
+# Shifted Function Keys:
+#
+# SHIFT + Key | capname|| Equivalent
+# -------------|--------||------------
+# SHIFT + F1 | <kf12> || FUNCT + `
+# SHIFT + F2 | <kf13> || FUNCT + a
+# SHIFT + F3 | <kf14> || FUNCT + b
+# SHIFT + F4 | <kf15> || FUNCT + c
+# SHIFT + F5 | <kf16> || FUNCT + d
+# SHIFT + F6 | <kf17> || FUNCT + e
+# SHIFT + F7 | <kf18> || FUNCT + f
+# SHIFT + F8 | <kf19> || FUNCT + g
+# SHIFT + F9 | <kf20> || FUNCT + h
+# SHIFT + F10 | <kf21> || FUNCT + i
+# SHIFT + F11 | <kf22> || FUNCT + j
+#
+# PORTS AND SWITCH SETTINGS
+#
+# Here are the switch settings for the TVI-912B/TVI-920B and
+# TVI-912C/TVI-920C:
+#
+# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
+# 2: 9600 3: 4800 4: 2400 5: 1200
+# 6: 600 7: 300 8: 150 9: 75
+# 10: 110
+#
+# S2 UART/Terminal options:
+# Up Down
+# 1: Not used Not allowed
+# 2: Alternate character set Standard character set
+# 3: Full duplex Half duplex
+# 4: 50 Hz refresh 60 Hz refresh
+# 5: No parity Send parity
+# 6: 2 stop bits 1 stop bit
+# 7: 8 data bits 7 data bits
+# 8: Not used Not allowed on Rev E or lower
+# 9: Even parity Odd parity
+# 10: Steady cursor Blinking cursor
+# (On Rev E or lower, use W25 instead of switch 10.)
+#
+# S5 UART/Terminal options:
+# Open Closed
+# 1: P3-6 Not connected DSR received on P3-6
+# 2: P3-8 Not connected DCD received on P3-8
+#
+# 3 Open, 4 Open: P3-20 Not connected
+# 3 Open, 4 Closed: DTR on when terminal is on
+# 3 Closed, 4 Open: DTR is connected to RTS
+# 3 Closed, 4 Closed: Not allowed
+#
+# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
+# all data transmitted out of the modem port (P3) will also be
+# transmitted out of the printer port (P4).
+#
+# 6 Open, 7 Open: Not allowed
+# 6 Open, 7 Closed: 20ma current loop input
+# 6 Closed, 7 Open: RS232 input
+# 6 Closed, 7 Closed: Not allowed
+#
+# Jumper options:
+# If the jumper is installed, the effect will occur (the next time the terminal
+# is switched on).
+#
+# S4/W31: Enables automatic LF upon receipt of CR from
+# remote or keyboard.
+# S4/W32: Enables transmission of EOT at the end of Send. If not
+# installed, a carriage return is sent.
+# S4/W33: Disables automatic carriage return in column 80.
+# S4/W34: Selects Page Print Mode as initial condition. If not
+# installed, Extension Mode is selected.
+#
+# NON-STANDARD CAPABILITIES
+#
+# Sending <u9> or <u7> returns a cursor position report in the format
+# YX\r, where Y and X are as in :cm:. This format is described in
+# <u8> and <u6>, but it's not clear how one should write an
+# appropriate scanf string, since we need to subtract %' ' from the
+# character after reading it. The <u9> capability is used by tack(1)
+# to synchronize during padding tests, and seems to work for that
+# purpose.
+#
+# This description also includes the obsolete termcap capabilities
+# has_hardware_tabs (:pt:) and backspaces_with_bs (:bs:).
+#
+# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
+#
+# The FUNCT modifier actually works with every normal key by sending
+# ^AX\r, where X is the sequence normally sent by that key. This is a
+# sort of meta key not currently describable in terminfo.
+#
+# There are quite a few other keys (especially on the 920 models,) but
+# they are for the most part only useful in block mode.
+#
+# These terminals have lots of forms manipulation features, mainly
+# useful in block mode, including "clear X to nulls" (vs. "clear X to
+# spaces"; nulls are sentinels for "send X" operations); "send X"
+# operations for uploading all or part of the screen; and block-mode
+# editing keys (they don't send escape sequences, but manipulate video
+# memory directly). Block mode is used for local editing, and protect
+# mode (in conjunction with the "write protect" attribute,
+# a.k.a. half-intensity outside of protect mode) is used to control
+# which parts of the screen are edited/sent/printed (by <mc0>).
+#
+# There are at least two major families of ROM, "early" and
+# A49B1/A49C1; the major difference seems to be that the latter ROMs
+# support a few extra escape sequences for manipulating the off-screen
+# memory page, and for sending whole pages back to the host (mainly
+# useful in block mode.) The descriptions in this file don't use any
+# of those sequences: set cursor position including page (\E-PYX,
+# where P is \s for page 0 and ! for page 1 [actually only the LSB of
+# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
+# as in :cm:); read cursor position (\E/), which is analogous to <u9>
+# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
+# are as in :cm:, and some "send page" features mainly useful for
+# forms manipulation.
+#
+# The keyboard enable (\E") and disable (\E#) sequences are unused,
+# except that a terminal reset (:is:) enables the keyboard.
+#
+# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
+# enabled in :is:, but auto-flip is very jarring so we don't use it.
+#
+# BUGS
+#
+# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
+# sequences (I infer that in some TeleVideo terminal they may invert
+# and uninvert the display) so the :vb: sequence given here is a
+# cheesy page-flip instead.
+#
+# The back_tab (:bt:) sequence (\EI) doesn't work according to
+# tack(1), so it is not included in the descriptions below.
+#
+# It's not clear whether auto_left_margin (:bw:) flag should be set
+# for these terminals; tack says yes, so it is set here, but this
+# differs from other descriptions I've seen.
+#
+# Extension print mode (<mc5>) echoes all characters to the printer
+# port [in addition to displaying them] except for the page print mode
+# sequence (<mc4>); this is a slight violation of the terminfo
+# definition for <mc5> but I don't expect it to cause problems. We
+# reset to page print mode in <rs1> since it may have been enabled
+# accidentally.
+#
+# The descriptions with plus signs (+) are building blocks.
+
+tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes):\
+ :am:bs:bw:pt:\
+ :co#80:it#8:li#24:\
+ :@8=^M:al=100\EE:bl=^G:cd=10\Ey:ce=15\ET:cl=50\032:\
+ :cm=\E=%+ %+ :cr=^M:ct=\E3:dc=30\EW:dl=100\ER:do=^J:ei=:\
+ :ho=^^:ic=30\EQ:if=/usr/share/tabset/stdcrt:im=:\
+ :is=\Ew\EA\E'\E"\E(:kD=\177:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\
+ :le=^H:nd=^L:pf=\EA:po=\E@:r1=\Ek\010\Em\010\Eq\032:\
+ :sf=10\n:st=\E1:ta=^I:u6=%.%.\r:u7=\E?:u8=%.%.\r:u9=\E?:\
+ :up=^K:
+
+# This isn't included in the basic capabilities because it is
+# typically unusable in combination with the full range of video
+# attributes, since the magic cookie attributes turn into ASCII
+# control characters, and the half-intensity ("protected") attribute
+# converts all affected characters to spaces.
+
+tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support:\
+ :ps=\EP:
+
+# This uses half-intensity mode (:mh:) for standout (:so:), and
+# exposes no other attributes (half-intensity is the only attribute
+# that does not generate a magic cookie.)
+
+tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support:\
+ :ms:\
+ :me=\E(:mh=\E):se=\E(:so=\E):
+
+# Full magic-cookie attribute support, with half-intensity reverse
+# video for standout. Note that we add a space in the :mh: sequence
+# to give a consistent magic-cookie count. Also note that :sa: uses
+# backspacing (in the TVI-supported order) to apply all requested
+# attributes with only a single magic cookie.
+
+tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support:\
+ :sg#1:ug#1:\
+ :mb=\E\136:me=\E(\Ek\010\Em\010\Eq:mh=\E)\040:mk=\E_:\
+ :mr=\Ej:se=\E(\Ek:so=\E)\Ej:ue=\Em:us=\El:
+
+# This uses the second page memory option to save & restore screen
+# contents. If your terminal is missing the option, this description
+# should still work, but that has not been tested.
+
+tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support:\
+ :te=\032\EK\E=7\040:\
+ :ti=50\EK\032\E(\Ek\010\Em\010\Eq\032:vb=\EK\EK:
+
+# This simulates flashing by briefly toggling to the other page
+# (kludge!)
+
+tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support:\
+ :bl=\EK\EK:tc=tvi912b+2p:
+
+# Function keys (<kf12> .. <kf22> are shifted :k1: .. <kf11>)
+
+tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support:\
+ :F1=^AJ\r:F2=^A`\r:F3=^Aa\r:F4=^Ab\r:F5=^Ac\r:F6=^Ad\r:\
+ :F7=^Ae\r:F8=^Af\r:F9=^Ag\r:FA=^Ah\r:FB=^Ai\r:FC=^Aj\r:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:
+
+# Combinations of the basic building blocks
+
+tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes):\
+ :tc=tvi912b+2p:tc=tvi912b-unk:
+
+tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes):\
+ :tc=tvi912b+vb:tc=tvi912b-unk:
+
+tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print):\
+ :tc=tvi912b+printer:tc=tvi912b-unk:
+
+tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print):\
+ :tc=tvi912b+2p:tc=tvi912b+printer:tc=tvi912b-unk:
+
+tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print):\
+ :tc=tvi912b+vb:tc=tvi912b+printer:tc=tvi912b-unk:
+
+tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute):\
+ :tc=tvi912b+2p:tc=tvi912b+dim:tc=tvi912b-unk:
+
+tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies):\
+ :tc=tvi912b+2p:tc=tvi912b+mc:tc=tvi912b-unk:
+
+tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute):\
+ :tc=tvi912b+vb:tc=tvi912b+dim:tc=tvi912b-unk:
+
+tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies):\
+ :tc=tvi912b+vb:tc=tvi912b+mc:tc=tvi912b-unk:
+
+tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute):\
+ :tc=tvi912b+dim:tc=tvi912b-unk:
+
+tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies):\
+ :tc=tvi912b+mc:tc=tvi912b-unk:
+
+tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes):\
+ :tc=tvi920b+fn:tc=tvi912b-unk:
+
+tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes):\
+ :tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b-unk:
+
+tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes):\
+ :tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b-unk:
+
+tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print):\
+ :tc=tvi920b+fn:tc=tvi912b+printer:tc=tvi912b-unk:
+
+tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print):\
+ :tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b+printer:\
+ :tc=tvi912b-unk:
+
+tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print):\
+ :tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b+printer:\
+ :tc=tvi912b-unk:
+
+tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute):\
+ :tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b+dim:\
+ :tc=tvi912b-unk:
+
+tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies):\
+ :tc=tvi920b+fn:tc=tvi912b+2p:tc=tvi912b+mc:\
+ :tc=tvi912b-unk:
+
+tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute):\
+ :tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b+dim:\
+ :tc=tvi912b-unk:
+
+tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies):\
+ :tc=tvi920b+fn:tc=tvi912b+vb:tc=tvi912b+mc:\
+ :tc=tvi912b-unk:
+
+tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute):\
+ :tc=tvi920b+fn:tc=tvi912b+dim:tc=tvi912b-unk:
+
+tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies):\
+ :tc=tvi920b+fn:tc=tvi912b+mc:tc=tvi912b-unk:
+
+# Televideo 921 and variants
+# From: Tim Theisen <[email protected]> 22 Sept 1995
+# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi921|televideo model 921 with sysline same as page & real vi function:\
+ :am:bs:hs:pt:xn:xs:\
+ :co#80:li#24:sg#0:\
+ :ac=:ae=\E%%:al=\EE:as=\E$:cd=\EY:ce=\ET:cl=^Z:\
+ :cm=3\E=%+ %+ :cr=^M:dc=\EW:dl=1*\ER:do=^V:ds=\Ef\r\Eg:ei=:\
+ :fs=\Eg:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\
+ :is=\El\E"\EF1\E.3\017\EA\E<:kA=\EE:kC=^Z:kD=\EW:kE=\ET:\
+ :kI=\EQ:kL=1*\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:ku=^K:le=^H:\
+ :mk@:nd=^L:nw=^M^J:sf=^J:ta=^I:ts=\Ef\EG0:up=^K:ve=\E.3:\
+ :vs=\E.2:tc=adm+sgr:
+# without the beeper
+# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper:\
+ :am:hs:xn:xs:\
+ :co#80:li#24:sg#0:\
+ :ac=:ae=\E%%:al=\EE:as=\E$:cd=\EY:ce=\ET:cl=^Z:\
+ :cm=3\E=%+ %+ :cr=^M:dc=\EW:dl=1*\ER:do=^V:ds=\Ef\r\Eg:ei=:\
+ :fs=\Eg:ho=^^:ic=\EQ:if=/usr/share/tabset/stdcrt:im=:\
+ :is=\El\E"\EF1\E.3\017\EA\E<:kA=\EE:kC=^Z:kD=\EW:kE=\ET:\
+ :kI=\EQ:kL=1*\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:ku=^K:le=^H:\
+ :mk@:nd=^L:nw=^M^J:sf=^J:ta=^I:ts=\Ef\EG0:up=^K:vb=\Eb\Ed:\
+ :ve=\E.3:vs=\E.2:tc=adm+sgr:
+# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
+tvi92D|tvi92B with DTR instead of XON/XOFF & better padding:\
+ :al=2*\EE:dl=2*\ER:is=\El\E"\EF1\E.3\016\EA\E<:kA=2*\EE:\
+ :kL=2*\ER:tc=tvi92B:
+
+# (tvi924: This used to have :ds=\Es0:, :fs=\031:. I put the new strings
+# in from a BSD termcap file because it looks like they do something the
+# old ones skip -- esr)
+tvi924|televideo tvi924:\
+ :am:bw:hs:in:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:sg#0:ws#80:\
+ :F1=^AK\r:F2=^AL\r:F3=^AM\r:F4=^AN\r:F5=^AO\r:al=\EE:bl=^G:\
+ :bt=\EI:cd=\Ey:ce=\Et:cl=\E*0:cm=\E=%+ %+ :cr=^M:\
+ :cs=\E_%+ %+ :ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Es0\Ef\031:\
+ :ei=:fs=\031\Es1:ho=^^:\
+ :i1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0:ic=\EQ:\
+ :if=/usr/share/tabset/stdcrt:im=:k0=^A@\r:k1=^AA\r:\
+ :k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
+ :k8=^AH\r:k9=^AI\r:k;=^AJ\r:kA=\EE:kC=\E*0:kD=\EW:kE=\Et:\
+ :kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:\
+ :l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:l9=F10:\
+ :la=F11:le=^H:mb=\EG2:mk@:nd=^L:sf=^J:sr=\Ej:st=\E1:ta=^I:\
+ :ts=\Ef:up=^K:vb=\Eb\Ed:ve=\E.3:vi=\E.0:vs=\E.1:tc=adm+sgr:
+
+# TVI925 DIP switches. In each of these, D = Down and U = Up,
+#
+# Here are the settings for the external (baud) switches (S1):
+#
+# Position Baud
+# 7 8 9 10 [Printer]
+# 1 2 3 4 [Main RS232]
+# -----------------------------------------------------
+# D D D D 9600
+# D D D U 50
+# D D U D 75
+# D D U U 110
+# D U D D 135
+# D U D U 150
+# D U U D 300
+# D U U U 600
+# U D D D 1200
+# U D D U 1800
+# U D U D 2400
+# U D U U 3600
+# U U D D 4800
+# U U D U 7200
+# U U U D 9600
+# U U U U 19200
+#
+#
+# Settings for word length and stop-bits (S1)
+#
+# Position Description
+# 5 6
+# ---------------------------
+# U - 7-bit word
+# D - 8-bit word
+# - U 2 stop bits
+# - D 1 stop bit
+#
+#
+# S2 (external) settings
+#
+# Position Up Dn Description
+# --------------------------------------------
+# 1 X Local edit
+# X Duplex edit (transmit editing keys)
+# --------------------------------------------
+# 2 X 912/920 emulation
+# X 925
+# --------------------------------------------
+# 3 X
+# 4 X No parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Odd parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Even parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Mark parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Space parity
+# 5 X
+# --------------------------------------------
+# 6 X White on black display
+# X Black on white display
+# --------------------------------------------
+# 7 X Half Duplex
+# 8 X
+# --------------------------------------------
+# 7 X Full Duplex
+# 8 X
+# --------------------------------------------
+# 7 X Block mode
+# 8 X
+# --------------------------------------------
+# 9 X 50 Hz
+# X 60 Hz
+# --------------------------------------------
+# 10 X CR/LF (Auto LF)
+# X CR only
+#
+# S3 (internal switch) settings:
+#
+# Position Up Dn Description
+# --------------------------------------------
+# 1 X Keyclick off
+# X Keyclick on
+# --------------------------------------------
+# 2 X English
+# 3 X
+# --------------------------------------------
+# 2 X German
+# 3 X
+# --------------------------------------------
+# 2 X French
+# 3 X
+# --------------------------------------------
+# 2 X Spanish
+# 3 X
+# --------------------------------------------
+# 4 X Blinking block cursor
+# 5 X
+# --------------------------------------------
+# 4 X Blinking underline cursor
+# 5 X
+# --------------------------------------------
+# 4 X Steady block cursor
+# 5 X
+# --------------------------------------------
+# 4 X Steady underline cursor
+# 5 X
+# --------------------------------------------
+# 6 X Screen blanking timer (ON)
+# X Screen blanking timer (OFF)
+# --------------------------------------------
+# 7 X Page attributes
+# X Line attributes
+# --------------------------------------------
+# 8 X DCD disconnected
+# X DCD connected
+# --------------------------------------------
+# 9 X DSR disconnected
+# X DSR connected
+# --------------------------------------------
+# 10 X DTR Disconnected
+# X DTR connected
+# --------------------------------------------
+#
+# (tvi925: BSD has :cl=\E*:. I got :is: and :sr: from there -- esr)
+tvi925|televideo 925:\
+ :am:bs:bw:hs:ul:\
+ :co#80:li#24:sg#1:\
+ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
+ :ct=\E3:dc=\EW:dl=\ER:do=^V:ds=\Eh:ei=:fs=^M\Eg:ho=^^:ic=\EQ:\
+ :im=:is=\El\E":k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
+ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
+ :kA=\EE:kC=^Z:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:\
+ :kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:nd=^L:sf=^J:sr=\Ej:st=\E1:\
+ :ta=^I:ts=\Eh\Ef:up=^K:vb=\Eb\Ed:ve=\E.4:vs=\E.2:\
+ :tc=adm+sgr:
+# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
+# to avoid "magic cookie" standout glitch:
+tvi925-hi|TeleVideo Model 925 with half intensity standout mode:\
+ :sg@:\
+ :kb=^H:kd=^J:kl=^H:se=\E(:so=\E):tc=tvi925:
+
+# From: Todd Litwin <[email protected]> 28 May 1993
+# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
+# for additional capabilities,
+# The following tvi descriptions from B:pjphar and virus!mike
+# is for all 950s. It sets the following attributes:
+# full duplex (\EDF) write protect off (\E()
+# conversation mode (\EC) graphics mode off (\E%)
+# white on black (\Ed) auto page flip off (\Ew)
+# turn off status line (\Eg) clear status line (\Ef\r)
+# normal video (\E0) monitor mode off (\EX or \Eu)
+# edit mode (\Er) load blank char to space (\Ee\040)
+# line edit mode (\EO) enable buffer control (^O)
+# protect mode off (\E\047) duplex edit keys (\El)
+# program unshifted send key to send line all (\E016)
+# program shifted send key to send line unprotected (\E004)
+# set the following to nulls:
+# field delimiter (\Ex0\200\200)
+# line delimiter (\Ex1\200\200)
+# start-protected field delimiter (\Ex2\200\200)
+# end-protected field delimiter (\Ex3\200\200)
+# set end of text delimiter to carriage return/null (\Ex4\r\200)
+#
+# TVI 950 Switch Setting Reference Charts
+#
+# TABLE 1:
+#
+# S1 1 2 3 4 5 6 7 8 9 10
+# +-----------------------+-----+-----+-----------------------+
+# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
+# | |Bits |Bits | |
+# +------+-----------------------+-----+-----+-----------------------+
+# | Up | See | 7 | 2 | See |
+# +------+-----------------------+-----+-----+-----------------------+
+# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
+# +------+-----------------------+-----+-----+-----------------------+
+#
+#
+# S2 1 2 3 4 5 6 7 8 9 10
+# +-----+-----+-----------------+-----+-----------+-----+-----+
+# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+#
+# TABLE 2:
+#
+# +-----------+-----+-----+-----+-----+-----------+
+# | Display | 1 | 2 | 3 | 4 | Baud |
+# +-----------+-----+-----+-----+-----+ |
+# | Printer | 7 | 8 | 9 | 10 | Rate |
+# +-----------+-----+-----+-----+-----+-----------+
+# | D | D | D | D | 9600 |
+# | U | D | D | D | 50 |
+# | D | U | D | D | 75 |
+# | U | U | D | D | 110 |
+# | D | D | U | D | 135 |
+# | U | D | U | D | 150 |
+# | D | U | U | D | 300 |
+# | U | U | U | D | 600 |
+# | D | D | D | U | 1200 |
+# | U | D | D | U | 1800 |
+# | D | U | D | U | 2400 |
+# | U | U | D | U | 3600 |
+# | D | D | U | U | 4800 |
+# | U | D | U | U | 7200 |
+# | D | U | U | U | 9600 |
+# | U | U | U | U | 19200 |
+# +-----+-----+-----+-----+-----------+
+#
+# TABLE 3:
+# +-----+-----+-----+-----------+
+# | 3 | 4 | 5 | Parity |
+# +-----+-----+-----+-----------+
+# | X | X | D | None |
+# | D | D | U | Odd |
+# | D | U | U | Even |
+# | U | D | U | Mark |
+# | U | U | U | Space |
+# +-----+-----+-----+-----------+
+# X = don't care
+#
+# CHART:
+# +-----+-----+-----------------+
+# | 7 | 8 | Communication |
+# +-----+-----+-----------------+
+# | D | D | Half Duplex |
+# | D | U | Full Duplex |
+# | U | D | Block |
+# | U | U | Local |
+# +-----+-----+-----------------+
+#
+# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
+# I also inserted :ic: and :kI:; the :ko: string indicated that :IC:
+# should be present and all tvi native modes use the same string for this.
+# Finally, note that BSD has cud1=^V. -- esr)
+tvi950|televideo 950:\
+ :am:bs:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:sg#1:\
+ :ac=b\011c\014d\re\ni\013:ae=^X:al=\EE:as=^U:bl=^G:bt=\EI:\
+ :cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :cr=^M:ct=\E3:dc=\EW:\
+ :dl=\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:ic=\EQ:im=\Eq:\
+ :is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\Ef\r:\
+ :k0=^A0\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
+ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kB=\EI:kC=\E*:\
+ :kD=\EW:kE=\Et:kI=\EQ:kL=\ER:kS=\Ey:kb=^H:kd=^V:kh=^^:kl=^H:\
+ :kr=^L:ku=^K:le=^H:mk@:nd=^L:pf=\Ea:po=\E`:sf=^J:sr=\Ej:\
+ :st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:tc=adm+sgr:
+#
+# is for 950 with two pages adds the following:
+# set 48 line page (\E\\2)
+# place cursor at page 0, line 24, column 1 (\E-07 )
+# set local (no send) edit keys (\Ek)
+#
+# two page 950 adds the following:
+# when entering ex, set 24 line page (\E\\1)
+# when exiting ex, reset 48 line page (\E\\2)
+# place cursor at 0,24,1 (\E-07 )
+# set duplex (send) edit keys (\El) when entering vi
+# set local (no send) edit keys (\Ek) when exiting vi
+#
+tvi950-2p|televideo950 w/2 pages:\
+ :is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07 \011:\
+ :ke=\Ek:ks=\El:te=\E\\2\E-07\040:ti=\E\\1\E-07\040:\
+ :tc=tvi950:
+#
+# is for 950 with four pages adds the following:
+# set 96 line page (\E\\3)
+# place cursor at page 0, line 24, column 1 (\E-07 )
+#
+# four page 950 adds the following:
+# when entering ex, set 24 line page (\E\\1)
+# when exiting ex, reset 96 line page (\E\\3)
+# place cursor at 0,24,1 (\E-07 )
+#
+tvi950-4p|televideo950 w/4 pages:\
+ :is=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07 \011:\
+ :ke=\Ek:ks=\El:te=\E\\3\E-07\040:ti=\E\\1\E-07\040:\
+ :tc=tvi950:
+#
+# :is: for reverse video 950 changes the following:
+# set reverse video (\Ed)
+#
+# set vb accordingly (\Ed ...delay... \Eb)
+#
+tvi950-rv|televideo950 rev video:\
+ :is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200:\
+ :vb=\Ed\Eb:tc=tvi950:
+
+# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
+tvi950-rv-2p|televideo950 rev video w/2 pages:\
+ :is=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07\040:\
+ :ke=\Ek:ks=\El:te=\E\\2\E-07\040:ti=\E\\1\E-07\040:\
+ :vb=\Ed\Eb:tc=tvi950:
+
+# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
+tvi950-rv-4p|televideo950 rev video w/4 pages:\
+ :is=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07\040:\
+ :ke=\Ek:ks=\El:te=\E\\3\E-07\040:ti=\E\\1\E-07\040:\
+ :vb=\Ed\Eb:tc=tvi950:
+# From: Andreas Stolcke <[email protected]>
+# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
+# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
+# the :rs: string, inserted the :IC: implied by the termcap :ko: string. Note
+# the :ko: string had :cl: in it, which means that one of the original
+# :cl=\E*:, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
+# the 950 has. Finally, corrected the <kel> string to match the 950 and what
+# ko implies -- esr)
+# If the BSD termcap file was right, :cm=\E=%p1%{32}%+%c%p2%{32}%+%c: would
+# also work.
+tvi955|televideo 955:\
+ :5i:bs:ms@:\
+ :it#8:sg@:\
+ :RA=\E[=7l:RX=^N:SA=\E[=7h:SX=^O:\
+ :ac=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ:ae=\E%%:as=\E$:\
+ :cm=\E[%i%d;%dH:do=^V:is=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El:\
+ :kM=\EQ:kN=\EK:kP=\EJ:kT=\E1:ka=\E3:kt=\E2:mb=\EG2:\
+ :me=\EG0\E[=5l:mh=\E[=5h:mk=\EG1:ps=\EP:\
+ :r1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\200\E0p\E4\200\Ef\r:\
+ :sf@:ve=\E.2:vi=\E.0:vs=\E.1:tc=tvi950:
+tvi955-w|955-w|televideo955 w/132 cols:\
+ :co#132:\
+ :is=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El:tc=tvi955:
+# use half-intensity as normal mode, full intensity as :md:
+tvi955-hb|955-hb|televideo955 half-bright:\
+ :is=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El:md=\E[=5l:\
+ :me=\EG0\E[=5h:mh@:tc=tvi955:
+# From: Humberto Appleton <[email protected]>, 880521 UT Austin
+# (tvi970: removed ":sg#0:"; removed :se:=\E[m, :ue:=\E[m;
+# added :am:/:cs:/:ho:/<hpa>/<vpa>/:ti:/:te: from BRL.
+# According to BRL we could have :ke:=\E>, :ks:=\E= but I'm not sure what
+# it does to the function keys. I deduced <rmam>/<smam>.
+# also added empty <acsc> to suppress tic warning, -- esr)
+tvi970|televideo 970:\
+ :am:bs:da:db:mi:ms:pt:\
+ :co#80:it#8:li#24:\
+ :RA=\E[?7h:SA=\E[?7l:ac=:ae=\E(B:al=\E[L:as=\E(B:bt=\E[Z:\
+ :cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\E[H\E[2J:cm=\E[%i%d;%df:\
+ :cs=\E[%i%d;%dr:cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=\ED:\
+ :ds=\Eg\Ef\r:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J:k1=\E?a:\
+ :k2=\E?b:k3=\E?c:k4=\E?d:k5=\E?e:k6=\E?f:k7=\E?g:k8=\E?h:\
+ :k9=\E?i:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ta=^I:te=:\
+ :ti=\E[?20l\E[?7h\E[1Q:ue=\E[m:up=\EM:us=\E[4m:\
+ :vb=\E[5m\E[m:vs=\E[1Q:
+tvi970-vb|televideo 970 with visual bell:\
+ :vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l:\
+ :tc=tvi970:
+tvi970-2p|televideo 970 with using 2 pages of memory:\
+ :te=\E[H\E[J\E[V:ti=\E[U\E[?20l\E[?7h\E[1Q:tc=tvi970:
+# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
+# per line (rather than 40), Esc K chooses the normal character set. Not sure
+# padding is needed, but adapted from the tvi920c termcap. The :so: and
+# :us: strings are klutzy, but at least use no screen space.
+# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
+# its absence means <smam>=\Ev isn't safe to use. -- esr)
+# From: Gene Rochlin <[email protected]> 9/19/84.
+# The :cd:/:k0:/:k1:/:kh:/<mc4>, and <mc5> caps are from BRL, which says:
+# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
+tvipt|televideo personal terminal:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=5*\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dl=5*\ER:\
+ :ho=^^:if=/usr/share/tabset/stdcrt:is=\Ev\Eu\EK:k0=^A:\
+ :k1=^B:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:pf=^T:\
+ :po=^R:se=\EF:so=\EG1@A\EH:ue=\EF:up=^K:us=\EG1B@\EH:
+# From: Nathan Peterson <[email protected]>, 03 Sep 1996
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+tvi9065|televideo 9065:\
+ :am:bw:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#25:lm#0:ma#4:vt#0:ws#30:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\EE:\
+ :bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E3:dc=\EW:dl=\ER:dm=\Er:do=^V:\
+ :ds=\E_30\r:ec=\E[%d@:ed=\200:ei=\Er:fs=^M:ho=^^:\
+ :i1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er:\
+ :i2=\E<\E[=4l\E[=8h:if=/usr/share/tabset/stdcrt:im=\Eq:\
+ :ip=3:is=\EF2\EG0\E\\L:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
+ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
+ :kD=\EW:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
+ :ll=\E[25;1H:mb=\EG2:md=\EG,:me=\EG0\E%:mh=\EGp:mr=\EG4:\
+ :nd=^L:nw=^M^J:rp=\E[%r%db%.:se=\EG0:sf=^J:so=\EGt:sr=\Ej:\
+ :st=\E1:ta=^I:te=\E.3\Er\E[1;25r\E[25;0H:ti=\E.2:\
+ :ts=\E[4;1v\E_30:uc=\EG8\EG0:ue=\EG0:up=^K:us=\EG8:\
+ :vb=\Eb\Ed:ve=\E.3:vi=\E.0:vs=\E.2:
+
+#### Visual (vi)
+#
+# In September 1993, Visual Technology of Westboro, Massachusetts,
+# merged with White Pine Software of Nashua, New Hampshire.
+#
+# White Pine Software may be contacted at +1 603/886-9050.
+# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
+#
+
+# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
+# Recently I hacked together the following termcap for Visual
+# Technology's Visual 50 terminal. It's a slight modification of
+# the vt52 termcap.
+# It's intended to run when the Visual 50 is in vt52 emulation mode
+# (I know what you're thinking; if it's emulating a vt52, then why
+# another termcap? Well, it turns out that the Visual 50 can handle
+# :dl: and db(?) among other things, which the vt52 can't)
+# The termcap works OK for the most part. The only problem is on
+# character inserts. The whole line gets painfully redrawn for each
+# character typed. Any suggestions?
+# Beau's entry is combined with the vi50 entry from University of Wisconsin.
+# Note especially the :al: function. :k4:-:k6: are really l4-l6 in
+# disguise; :k7:-:k9: are really l1-l3.
+vi50|visual 50:\
+ :am:bs:da:db:ms:pt:\
+ :co#80:it#8:li#24:\
+ :al=\EL:bl=^G:bt=4\Ez:cd=\EJ:ce=16\EK:cl=\EH\EJ:\
+ :cm=\EY%+ %+ :cr=^M:dl=3*\EM:do=\EB:ho=\EH:k1=\EP:k2=\EQ:\
+ :k3=\ER:k4=\EV:k5=\EE:k6=\E]:k7=\EL:k8=\Ev:k9=\EM:kb=^H:\
+ :kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:nl=^J:\
+ :nw=^M^J:se=\ET:sf=^J:so=\EU:sr=\EI:ta=^I:ue=\EW:up=\EA:\
+ :us=\ES:
+# this one was BSD & SCO's vi50
+vi50adm|visual 50 in adm3a mode:\
+ :am:ms:\
+ :co#80:it#8:li#24:\
+ :al=\EL:bl=^G:cd=\Ek:ce=\EK:cl=^Z:cm=\E=%+ %+ :cr=^M:dl=\EM:\
+ :do=^J:ho=\EH:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
+ :nd=^L:se=\ET:sf=^J:so=\EU:ta=^I:up=^K:
+# From: Jeff Siegal <[email protected]>
+vi55|Visual 55:\
+ :am:bs:mi:ms:\
+ :co#80:it#8:li#24:\
+ :al=\EL:cd=\EJ:ce=\EK:cl=\Ev:cm=\EY%+ %+ :cs=\E_%+A%+A:\
+ :dc=\Ew:dl=\EM:do=^J:ei=\Eb:ho=\EH:im=\Ea:\
+ :is=\Ev\E_AX\Eb\EW\E9P\ET:kb=^H:kd=\EB:kl=\ED:kr=\EC:\
+ :ku=\EA:le=^H:nd=\EC:se=\ET:so=\EU:sr=\EI:ta=^I:up=\EA:
+
+# Visual 200 from BRL
+# The following switch settings are assumed for normal operation:
+# FULL_DUPLEX SCROLL CR
+# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
+# Other switches may be set for operator convenience or communication
+# requirements.
+# Character insertion is kludged in order to get around the "beep" misfeature.
+# (This cap is commented out because :im:/:ei: is more efficient -- esr)
+# Supposedly "4*" delays should be used for :al:, :cd:, :cl:, :dc:,
+# and :dl: strings, but we seem to get along fine without them.
+vi200|visual 200:\
+ :am:bs:mi:ms:pt:\
+ :co#80:it#8:kn#10:li#24:\
+ :ac=:ae=\EG:al=\EL:as=\EF:bl=^G:bt=\Ez:cd=\Ey:ce=\Ex:cl=\Ev:\
+ :cm=\EY%+ %+ :cr=^M:ct=\Eg:dc=\EO:dl=\EM:do=^J:ho=\EH:\
+ :k0=\E?p:k1=\E?q:k2=\E?r:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:\
+ :k7=\E?w:k8=\E?x:k9=\E?y:kA=\EL:kC=\Ev:kD=\EO:kE=\Et:kI=\Ei:\
+ :kL=\EM:kM=\Ej:kS=\EJ:kT=\E1:kb=^H:kd=\EB:ke=\E>:kh=\EH:\
+ :kl=\ED:kr=\EC:ks=\E=:kt=\E2:ku=\EA:le=^H:me=\E3\Eb:mh=\E4:\
+ :mk=\Ea:nd=\EC:pf=\EX:po=\EW:ps=\EH\E]:\
+ :r1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX:se=\E3:sf=^J:so=\E4:\
+ :sr=\EI:st=\E1:ta=^I:up=\EA:ve=\Ec:vs=\Ed:
+# The older Visuals didn't come with function keys. This entry uses
+# :ks: and :ke: so that the keypad keys can be used as function keys.
+# If your version of vi doesn't support function keys you may want
+# to use vi200-f.
+vi200-f|visual 200 no function keys:\
+ :is=\E3\Eb\Ej\E\\\El\EG\Ed\Ek:k0=\E?p:k1=\E?q:k2=\E?r:\
+ :k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:k7=\E?w:k8=\E?x:k9=\E?y:\
+ :ke=\E>:ks=\E=:se@:so@:tc=vi200:
+vi200-rv|visual 200 reverse video:\
+ :se=\E3:so=\E4:sr@:ve@:vs@:tc=vi200:
+
+# the function keys are programmable but we don't reprogram them to their
+# default values with :is: because programming them is very verbose. maybe
+# an initialization file should be made for the 300 and they could be stuck
+# in it.
+# (vi300: added <rmam>/<smam> based on init string -- esr)
+vi300|visual 300 ansi x3.64:\
+ :am:bw:mi:xn:\
+ :co#80:li#24:\
+ :RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=40\E[P:dl=\E[M:\
+ :do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s:\
+ :k1=\E_A\E\\:k2=\E_B\E\\:k3=\E_C\E\\:k4=\E_D\E\\:\
+ :k5=\E_E\E\\:k6=\E_F\E\\:k7=\E_G\E\\:k8=\E_H\E\\:\
+ :k9=\E_I\E\\:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[1m:sr=\EM:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+# some of the vi300s have older firmware that has the command
+# sequence for setting editing extent reversed.
+vi300-old|visual 300 with old firmware (set edit extent reversed):\
+ :is=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s:\
+ :tc=vi300:
+
+# Visual 500 prototype entry from University of Wisconsin.
+# The best place to look for the escape sequences is page A1-1 of the
+# Visual 500 manual. The initialization sequence given here may be
+# overkill, but it does leave out some of the initializations which can
+# be done with the menus in set-up mode.
+# The :xp: line below is so that emacs can understand the padding requirements
+# of this slow terminal. :xp: is 10 time the padding factor.
+# (vi500: removed unknown :xp#4: termcap;
+# also added empty <acsc> to suppress tic warning -- esr)
+vi500|visual 500:\
+ :am:mi:ms:\
+ :co#80:it#8:li#33:\
+ :ac=:ae=^O:al=3*\EL\Ex:as=^N:bt=4\Ez:cd=3*\Ey:ce=16\Ex:\
+ :cl=6*\Ev:cm=\EY%+ %+ :cr=^M:cs=\E(%+ %+ :dc=3*\EO:\
+ :dl=3*\EM:do=\EB:ei=\Ej:ho=\EH:im=\Ei:\
+ :is=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\:\
+ :kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\
+ :nw=^M^J:se=\E^G:sf=^J:so=\E^H:ta=8\011:ue=\E^C:up=\EA:\
+ :us=\E^D:
+
+# The visual 550 is a visual 300 with tektronix graphics,
+# and with 33 lines. clear screen is modified here to
+# also clear the graphics.
+vi550|visual 550 ansi x3.64:\
+ :li#33:\
+ :cl=\030\E[H\E[2J:tc=vi300:
+
+vi603|visual603|visual 603:\
+ :hs:mi:\
+ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:ds=\EP2;1~\E\\:ei=\E[4l:\
+ :fs=\E\\:i1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r:\
+ :im=\E[4h:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
+ :se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ts=\EP2~:ue=\E[24m:\
+ :up=\E[A:us=\E[4m:tc=vt100:
+
+#### Wyse (wy)
+#
+# Wyse Technology
+# 3471 North First Street
+# San Jose, CA 95134
+# Vox: (408)-473-1200
+# Fax: (408) 473-1222
+# Web: http://www.wyse.com
+#
+# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
+# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
+# obvious address, <http://www.wyse.com>. They keep terminfo entries at
+# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
+#
+# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
+# They now own the Qume and Amdek brands, too. So these are the people to
+# talk with about all Link, Qume, and Amdek terminals.
+#
+# These entries include a few small fixes.
+# I canceled the bel capacities in the vb entries.
+# I made two trivial syntax fixes in the wyse30 entry.
+# I made some entries relative to adm+sgr.
+#
+#
+# Note: The wyse75, wyse85, and wyse99 have been discontinued.
+
+# Although the Wyse 30 can support more than one attribute
+# it requires magic cookies to do so. Many applications do not
+# function well with magic cookies. The following terminfo uses
+# the protect mode to support one attribute (dim) without cookies.
+# If more than one attribute is needed then the wy30-mc terminfo
+# should be used.
+#
+wy30|wyse30|Wyse 30:\
+ :5i:am:bw:hs:mi:ms:xo:\
+ :Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\
+ :#2=\E{:&3=\Er:@8=\E7:LF=\EA11:LO=\EA10:\
+ :ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=2\EE:\
+ :as=\EH^B:bl=^G:bt=\EI:cd=80\EY:ce=\ET:cl=80\E+:\
+ :cm=\E=%+ %+ :cr=^M:ct=\E0:dc=10\EW:dl=1\ER:do=^J:ds=\EF\r:\
+ :ei=\Er:fs=^M:ho=^^:im=\Eq:ip=2:\
+ :is=\E'\E(\E\1363\E`9\016\024:k1=^A@\r:k2=^AA\r:\
+ :k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
+ :kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
+ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
+ :me=\E(:mh=\E`7\E):mp=\E`7\E):nd=^L:nw=^M^J:pf=^T:po=^X:\
+ :ps=\EP:se=\E(:sf=2\n:so=\E`7\E):sr=3\Ej:st=\E1:ta=1\011:\
+ :ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+# (wy30-mc: added :ti: to suppress tic warning --esr)
+wy30-mc|wyse30-mc|wyse 30 with magic cookies:\
+ :ms@:\
+ :ma@:sg#1:\
+ :ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\
+ :me=\EG0\E(\EH\003:mh=\EGp:mp=\EG0\E):se=\EG0:so=\EG4:\
+ :te=\EG0:ti=:tc=wy30:tc=adm+sgr:
+# The mandatory pause used by :vb: does not work with
+# older versions of terminfo. If you see this effect then
+# unset xon and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+wy30-vb|wyse30-vb|wyse 30 visible bell:\
+ :bl@:tc=wy30:
+#
+# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
+# Normal) without magic cookies by using the protect mode.
+# The following description uses this feature, but when more
+# than one attribute is put on the screen at once, all attributes
+# will be changed to be the same as the last attribute given.
+# The Wyse 50 can support more attributes when used with magic
+# cookies. The wy50-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
+#
+wy50|wyse50|Wyse 50:\
+ :5i:am:bw:hs:mi:ms:xo:\
+ :Nl#8:co#80:lh#1:li#24:lw#8:ma#1:ws#45:\
+ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
+ :F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
+ :ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EH^C:al=\EE:\
+ :as=\EH^B:bl=^G:bt=\EI:cd=20\EY:ce=\ET:cl=20\E+:\
+ :cm=\E=%+ %+ :cr=^M:ct=\E0:dc=1\EW:dl=\ER:do=^J:ds=\EF\r:\
+ :ei=\Er:fs=^M:ho=^^:i1=30\E`\072\E`9:im=\Eq:ip=1:\
+ :is=\016\024\E'\E(:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
+ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
+ :kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
+ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
+ :me=\E(:mh=\E`7\E):mp=\E`7\E):mr=\E`6\E):nd=^L:nw=^M^J:\
+ :pf=^T:po=^X:ps=\EP:se=\E(:sf=2\n:so=\E`6\E):sr=\Ej:st=\E1:\
+ :ta=^I:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+# The mandatory pause used by flash does not work with some
+# older versions of terminfo. If you see this effect then
+# unset :xo: and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+# (wy50-mc: added :ti: to suppress tic warning --esr)
+wy50-mc|wyse50-mc|wyse 50 with magic cookies:\
+ :ms@:\
+ :ma@:sg#1:\
+ :ae=\EG0\EH\003:as=\EG0\EH\002:mb=\EG2:\
+ :me=\EG0\E(\EH\003:mh=\EGp:mp=\EG0\E):mr=\EG4:se=\EG0:\
+ :so=\EGt:te=\EG0:ti=:tc=wy50:tc=adm+sgr:
+wy50-vb|wyse50-vb|wyse 50 visible bell:\
+ :bl@:tc=wy50:
+wy50-w|wyse50-w|wyse 50 132-column:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cm=\Ea%i%dR%dC:dc=2\EW:i1=30\E`;\E`9:tc=wy50:
+wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell:\
+ :bl@:tc=wy50-w:
+
+#
+# The Wyse 350 is a Wyse 50 with color.
+# Unfortunately this means that it has magic cookies.
+# The color attributes are designed to overlap the reverse, dim and
+# underline attributes. This is nice for monochrome applications
+# because you can make underline stuff green (or any other color)
+# but for true color applications it's not so hot because you cannot
+# mix color with reverse, dim or underline.
+# To further complicate things one of the attributes must be
+# black (either the foreground or the background). In reverse video
+# the background changes color with black letters. In normal video
+# the foreground changes colors on a black background.
+# This terminfo uses some of the more advanced features of curses
+# to display both color and blink. In the final analysis I am not
+# sure that the wy350 runs better with this terminfo than it does
+# with the wy50 terminfo (with user adjusted colors).
+#
+# The mandatory pause used by flash does not work with
+# older versions of terminfo. If you see this effect then
+# unset xon and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+#
+# Bug: The <op> capability resets attributes.
+wy350|wyse350|Wyse 350:\
+ :5i:am:bw:hs:mi:xo:\
+ :Co#8:NC#55:Nl#8:co#80:lh#1:li#24:lw#8:pa#8:sg#1:ws#45:\
+ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
+ :F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:Sb=:\
+ :ac=0wa_h[jukslrmqnxqzttuyv]wpxv:ae=\EG0\EH\003:al=\EE:\
+ :as=\EG0\EH\002:bl=^G:bt=\EI:cd=20\EY:ce=\ET:cl=20\E+:\
+ :cm=\E=%+ %+ :cr=^M:ct=\E0:dc=1\EW:dl=\ER:do=^J:ds=\EF\r:\
+ :ei=\Er:fs=^M:ho=^^:i1=30\E`\072\E`9:i2=\E%?:im=\Eq:ip=1:\
+ :is=\016\024\E'\E(:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
+ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
+ :kA=\EE:kB=\EI:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:\
+ :kS=\EY:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:\
+ :mb=\EG2:me=%{0}%PA%{0}%PC:mh=\EGp:mp=\EG0\E):nd=^L:\
+ :nw=^M^J:oc=\E%?:op=\EG0:pf=^T:po=^X:ps=\EP:sf=2\n:sr=\Ej:\
+ :st=\E1:ta=^I:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
+ :tc=adm+sgr:
+wy350-vb|wyse350-vb|wyse 350 visible bell:\
+ :bl@:tc=wy350:
+wy350-w|wyse350-w|wyse 350 132-column:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cm=\Ea%i%dR%dC:dc=2\EW:i1=30\E`;\E`9:tc=wy350:
+wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell:\
+ :bl@:tc=wy350-w:
+#
+# This terminfo description is untested.
+# The wyse100 emulates an adm31, so the adm31 entry should work.
+#
+wy100|wyse 100:\
+ :hs:mi:\
+ :co#80:li#24:sg#1:\
+ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:\
+ :dc=\EW:dl=\ER:do=^J:ds=\EA31:ei=\Er:fs=^M:im=\Eq:is=\Eu\E0:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:kb=^H:kd=^J:kh=\E{:kl=^H:kr=^L:ku=^K:\
+ :le=^H:mk@:nd=^L:sf=^J:ts=\EF:up=^K:tc=adm+sgr:
+#
+# The Wyse 120/150 has most of the features of the Wyse 60.
+# This terminal does not need padding up to 9600 baud!
+# :ms: should be set but the clear screen fails when in
+# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
+# then set :ms:.
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+wy120|wyse120|wy150|wyse150|Wyse 120/150:\
+ :5i:am:bw:hs:km:mi:ms:xo:\
+ :Nl#8:co#80:it#8:lh#1:li#24:lw#8:pb#9601:ws#45:\
+ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
+ :F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:RA=\Ed.:\
+ :RX=\Ec20:SA=\Ed/:SX=\Ec21:al=3\EE:bl=^G:bt=\EI:cd=50\EY:\
+ :ce=4\ET:cl=50\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=7\EW:\
+ :dl=3\ER:do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:\
+ :i2=150\EwJ\Ew1:im=\Eq:ip=2:\
+ :is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
+ :kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:mb=\EG2:\
+ :me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=3\r\n:\
+ :pf=^T:po=\Ed#:ps=\EP:r1=30\E~!\E~4:r2=70\EeF\E`\072:\
+ :r3=100\EwG\Ee(:sf=3\n:so=\EGt:sr=2\Ej:st=\E1:ta=1\011:\
+ :te=\Ew1:ti=\Ew0:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
+ :tc=adm+sgr:
+#
+wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cm=\Ea%i%dR%dC:dc=12\EW:ip=4:rs=70\E`;:tc=wy120:
+#
+wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy120:
+#
+wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy120-w:
+#
+wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell:\
+ :bl@:tc=wy120:
+#
+wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell:\
+ :bl@:tc=wy120-w:
+#
+# The Wyse 60 is like the Wyse 50 but with more padding.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
+#
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# :i1: -> select the proper font
+# :is: -> do the initialization
+# :i3: -> set up display memory (2 pages)
+#
+# The Wyse 60's that have vt100 emulation are slower than the
+# older Wyse 60's. This change happened mid-1987.
+# The capabilities effected are :dc: :dl: :al: :sf: :sr:
+#
+# The meta key is only half right. This terminal will return the
+# high order bit set when you hit CTRL-function_key
+#
+# It may be useful to assign two function keys with the
+# values \E=(\s look at old data in page 1
+# \E=W, look at bottom of page 1
+# where \s is a space ( ).
+#
+# Note:
+# The Wyse 60 runs faster when the XON/XOFF
+# handshake is turned off.
+#
+# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <[email protected]> -- esr)
+wy60|wyse60|Wyse 60:\
+ :5i:am:bw:hs:km:mi:ms:\
+ :Nl#8:co#80:lh#1:li#24:lw#8:ws#45:\
+ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:F2=^AK\r:\
+ :F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
+ :RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:SX=\Ec21:\
+ :ac=+/,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
+ :ae=\EcD:al=4\EE:as=\EcE:bl=^G:bt=\EI:cd=100\EY:ce=\ET:\
+ :cl=100\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=11\EW:dl=5\ER:\
+ :do=^J:ds=\EF\r:ei=\Er:fs=^M:ho=\E{:i1=\EcB0\EcC1:\
+ :i2=150\EwJ\Ew1:im=\Eq:ip=3:\
+ :is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
+ :kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:ll=\E{^K:mb=\EG2:\
+ :me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=3\r\n:\
+ :pf=^T:po=\Ed#:ps=\EP:r1=150\E~!\E~4:r2=150\EeG:\
+ :r3=200\EwG\Ee(:sf=5\n:so=\EGt:sr=7\Ej:st=\E1:ta=1\011:\
+ :te=\Ew1:ti=\Ew0:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
+ :tc=adm+sgr:
+#
+wy60-w|wyse60-w|wyse 60 132-column:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cm=\Ea%i%dR%dC:dc=16\EW:ip=5:rs=150\EeF\E`;:tc=wy60:
+#
+wy60-25|wyse60-25|wyse 60 80-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=200\EwG\Ee):tc=wy60:
+wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=200\EwG\Ee):tc=wy60-w:
+#
+wy60-42|wyse60-42|wyse 60 80-column 42-lines:\
+ :li#42:\
+ :al=11\EE:cd=260\Ey:cl=260\E+:cm=2\E=%+ %+ :dc=16\EW:\
+ :dl=11\ER:i1=\EcB2\EcC3:ip=5:nw=6\r\n:r3=150\Ee*:sf=9\n:\
+ :sr=10\Ej:tc=wy60:
+wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cd=260\Ey:cl=260\E+:cm=2\Ea%i%dR%dC:dc=19\EW:ho=2\036:\
+ :ip=6:nw=11\r\n:rs=150\EeF\E`;:tc=wy60-42:
+#
+wy60-43|wyse60-43|wyse 60 80-column 43-lines:\
+ :Nl@:lh@:li#43:lw@:\
+ :pn@:r3=150\Ee+:tc=wy60-42:
+wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines:\
+ :Nl@:lh@:li#43:lw@:\
+ :pn@:r3=150\Ee+:tc=wy60-42-w:
+#
+wy60-vb|wyse60-vb|Wyse 60 visible bell:\
+ :bl@:tc=wy60:
+wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell:\
+ :bl@:tc=wy60-w:
+
+# The Wyse-99GT looks at lot like the Wyse 60 except that it
+# does not have the 42/43 line mode. In the Wyse-60 the "lines"
+# setup parameter controls the number of lines on the screen.
+# For the Wyse 99GT the "lines" setup parameter controls the
+# number of lines in a page. The screen can display 25 lines max.
+# The Wyse-99GT also has personalities for the VT220 and
+# Tektronix 4014. But this has no bearing on the native mode.
+#
+# (msgr) should be set but the clear screen fails when in
+# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
+# then set msgr, else use msgr@.
+#
+# u0 -> enter Tektronix mode
+# u1 -> exit Tektronix mode
+#
+wy99gt|wyse99gt|Wyse 99gt:\
+ :ms@:\
+ :al=4\EE:cd=130\Ey:ce=5\Et:cl=130\E+:dc=7\EW:dl=4\ER:\
+ :i2=20\Ew0:ip=2:nw@:rs=150\E`\072:sf=4\n:sr=3\Ej:ta=1\011:\
+ :te=\Ew0:ti=\Ew1:u0=\E~>\E8:u1=\E[42h:vb=\E`8\E`9:tc=wy60:
+#
+wy99gt-w|wyse99gt-w|wyse 99gt 132-column:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cd=160\Ey:cl=160\E+:cm=2\Ea%i%dR%dC:dc=9\EW:ip=4:\
+ :rs=150\E`;:tc=wy99gt:
+#
+wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r2=150\E`\072:r3=200\EwG\Ee):tc=wy99gt:
+#
+wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:rs=150\E`;:tc=wy99gt-w:
+#
+wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell:\
+ :bl@:tc=wy99gt:
+#
+wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell:\
+ :bl@:tc=wy99gt-w:
+
+# Can't set tabs! Other bugs (ANSI mode only):
+# - can't redefine function keys (anyway, key redefinition in ANSI mode
+# is too much complex to be described);
+# - meta key can't be described (the terminal forgets it when reset);
+# The xon-xoff handshaking can't be disabled while in ansi personality, so
+# emacs can't work at speed greater than 9600 baud. No padding is needed at
+# this speed.
+# dch1 has been commented out because it causes annoying glittering when
+# vi deletes one character at the beginning of a line with tabs in it.
+# dch makes sysgen(1M) have a horrible behaviour when deleting
+# a screen and makes screen(1) behave badly, so it is disabled too. The nice
+# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
+# not, so smir and rmir are commented out as well.
+# From: Francesco Potorti` <[email protected]>, 24 Aug 1998
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard):\
+ :am:km:mi:ms:xn:\
+ :co#80:it#8:li#25:vt#3:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=1\E[%dD:\
+ :RI=1\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:\
+ :cd=8*\E[J:ce=1\E[K:cl=200\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:dl=\E[M:do=\ED:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
+ :im=\E[4h:\
+ :is=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h:ku=\EOA:le=1\010:ll=\E[24E:\
+ :mb=\E[5m:md=\E[1m:me=\E[m\017\E["q:mh=\E[2m:mr=\E[7m:\
+ :nd=1\E[C:nw=\EE:rc=\E8:\
+ :rs=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i:\
+ :sc=\E7:se=\E[27m:sf=1\n:so=\E[7m:sr=\EM:ta=^I:ue=\E[24m:\
+ :up=\EM:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[34h\E[?25h:\
+ :vi=\E[?25l:vs=\E[34l\E[?25h:
+
+# This is the american terminal. Here tabs work fine.
+# From: Francesco Potorti` <[email protected]>, 24 Aug 1998
+wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard):\
+ :ct=\E[3g:i2=\E[?5l:r3=\E[?5l:st=\EH:tc=wy99-ansi:
+
+# This terminal (firmware version 02) has a lot of bugs:
+# - can't set tabs;
+# - other bugs in ANSI modes (see above).
+# This description disables handshaking when using cup. This is because
+# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
+# cannot be used at speeds greater than 9600 baud, because at greater
+# speeds handshaking is needed even for character sending. If you use
+# DTR handshaking, you can use even greater speeds.
+# From: Francesco Potorti` <[email protected]>, 24 Aug 1998
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard):\
+ :am:bw:hs:km:mi:ms:xo:\
+ :co#80:it#8:li#25:ws#46:\
+ :K1=^^:K3=\EJ:K4=\ET:K5=\EK:al=\EE:bl=^G:bt=\EI:cd=8*\EY:\
+ :ce=8\ET:cl=\E'\E(\032:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
+ :do=\Ej:ds=\EF\r:ei=\Er:fs=^M:ho=^^:im=\Eq:\
+ :is=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\1360\E`1\E`4\Ee.\E`\072\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:\
+ :le=^H:mb=\EG2:me=\E(\EG0\EcD:mh=\EGp:mr=\EG4:nd=^L:nw=^_:\
+ :rs=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\1360\E`1\E`4\Ee.\E`\072\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024:\
+ :se=\EG0:sf=^J:so=\EG4:sr=\Ej:ta=^I:te=\Ec21\Ec31:\
+ :ti=\Ec20\Ec30:ts=\EF:up=^K:vb=\E\1361\E\1360:\
+ :ve=\E`4\E`1:vi=\E`0:vs=\E`2\E`1:
+
+# This is the american terminal. Here tabs work.
+# From: Francesco Potorti` <[email protected]>, 24 Aug 1998
+wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard):\
+ :ct=\E0:st=\E1:tc=wy99f:
+
+#
+# The Wyse 160 is combination of the WY-60 and the WY-99gt.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
+#
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# :i1: -> select the proper font
+# :is: -> do the initialization
+# :i3: -> set up display memory (2 pages)
+#
+# The display memory may be used for either text or graphics.
+# When "Display Memory = Shared" the terminal will have more pages
+# but garbage may be left on the screen when you switch from
+# graphics to text. If "Display Memory = Unshared" then the
+# text area will be only one page long.
+#
+# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <[email protected]> -- esr)
+wy160|wyse160|Wyse 160:\
+ :5i:am:bw:hs:km:mi:ms:\
+ :Nl#8:co#80:lh#1:li#24:lw#8:ws#38:\
+ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:DK=\E`b:F1=^AJ\r:F2=^AK\r:\
+ :F3=^AL\r:F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:\
+ :RA=\Ed.:RC=\E`c:RX=\Ec20:SA=\Ed/:SX=\Ec21:\
+ :ac=+/,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
+ :ae=\EcD:al=1\EE:as=\EcE:bl=^G:bt=\EI:cd=30\EY:ce=5\ET:\
+ :cl=30\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=5\EW:dl=1\ER:do=^J:\
+ :ds=\EF\r:ei=\Er:fs=^M:ho=\E{:i1=\EcB0\EcC1:i2=100\Ew0:\
+ :im=\Eq:ip=2:\
+ :is=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
+ :kE=\ET:kI=\EQ:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:ll=\E{^K:mb=\EG2:\
+ :me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:nw=1\r\n:\
+ :pf=^T:po=\Ed#:ps=\EP:r1=70\E~!\E~4:r2=100\E`\072:\
+ :r3=140\EwG\Ee(:sf=1\n:so=\EGt:sr=1\Ej:st=\E1:ta=^I:\
+ :te=\Ew0:ti=\Ew1:ts=\EF:up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:\
+ :tc=adm+sgr:
+#
+wy160-w|wyse160-w|wyse 160 132-column:\
+ :Nl#16:co#132:lw#7:ws#90:\
+ :cm=\Ea%i%dR%dC:dc=9\EW:rs=150\EeF\E`;:tc=wy160:
+#
+wy160-25|wyse160-25|wyse 160 80-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=200\EwG\Ee):tc=wy160:
+wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=200\EwG\Ee):tc=wy160-w:
+#
+wy160-42|wyse160-42|wyse 160 80-column 42-lines:\
+ :li#42:\
+ :al=2\EE:cd=50\Ey:cl=50\E+:dl=2\ER:i1=\EcB2\EcC3:nw=2\r\n:\
+ :r3=150\Ee*:sf=2\n:sr=2\Ej:tc=wy160:
+wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines:\
+ :Nl#16:co#132:lw#7:ws#90:\
+ :cm=\Ea%i%dR%dC:dc=8\EW:ip=3:rs=150\EeF\E`;:tc=wy160-42:
+#
+wy160-43|wyse160-43|wyse 160 80-column 43-lines:\
+ :Nl@:lh@:li#43:lw@:\
+ :pn@:r3=150\Ee+:tc=wy160-42:
+wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines:\
+ :Nl@:lh@:li#43:lw@:\
+ :pn@:r3=150\Ee+:tc=wy160-42-w:
+#
+wy160-vb|wyse160-vb|Wyse 160 visible bell:\
+ :bl@:tc=wy160:
+wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell:\
+ :bl@:tc=wy160-w:
+#
+# The Wyse 75 is a vt100 lookalike without advanced video.
+#
+# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
+# Underline) without magic cookies. The following description
+# uses this capability, but when more than one attribute is
+# put on the screen at once, all attributes will be changed
+# to be the same as the last attribute given.
+# The Wyse 75 can support more attributes when used with magic
+# cookies. The wy75-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy75|wyse75|wyse 75:\
+ :am:hs:mi:ms:xn:xo:\
+ :co#80:li#24:ma#1:pb#1201:ws#78:\
+ :AL=2*\E[%dL:DC=3*\E[%dP:DL=1*\E[%dM:DO=\E[%dB:\
+ :IC=1*\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=2\E[L:\
+ :as=^N:bl=^G:bt=\E[Z:cd=30\E[J:ce=3\E[K:cl=30\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=2\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:\
+ :dl=\E[M:do=^J:ds=\E[>,\001\001\E[>-\001\001:ec=\E[%dX:\
+ :ei=\E[4l:fs=^A:ho=\E[H:\
+ :i1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h:i2=\E[m:\
+ :im=\E[4h:ip=1:is=\E>\E(B\E)0\017:k1=\E[?5i:k2=\E[?3i:\
+ :k3=\E[2i:k4=\E[@:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:kI=\E[@:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:\
+ :kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[?1l\E[?7h\E=:ku=\E[A:le=^H:\
+ :me=\E[m:mh=\E[0t\E[2m:mr=\E[1t\E[7m:nd=\E[C:rc=\E8:\
+ :sc=\E7:se=\E[m:sf=2\n:so=\E[1t\E[7m:sr=2\EM:st=\EH:ta=^I:\
+ :ts=\E[>,\001:ue=\E[m:up=\E[A:us=\E[2t\E[4m:\
+ :vb=250\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:\
+ :tc=vt220+keypad:
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+wy75-mc|wyse75-mc|wyse 75 with magic cookies:\
+ :ms@:\
+ :ma@:sg#1:ug#1:\
+ :ae=\E[0p\017:as=\E[0p\016:i2=\E[m\E[p:mb=\E[2p:\
+ :me=\E[0p\017:mh=\E[1p:mk=\E[4p:mr=\E[16p:se=\E[0p:\
+ :so=\E[17p:ue=\E[0p:us=\E[8p:tc=wy75:
+wy75-vb|wyse75-vb|wyse 75 with visible bell:\
+ :pb@:\
+ :bl@:tc=wy75:
+wy75-w|wyse75-w|wyse 75 in 132 column mode:\
+ :co#132:ws#130:\
+ :rs=80\E[35h\E[?3h:tc=wy75:
+wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns:\
+ :pb@:\
+ :bl@:tc=wy75-w:
+#
+# Wyse 85 emulating a vt220 7 bit mode.
+# 24 line screen with status line.
+#
+# The vt220 mode permits more function keys but it wipes out
+# the escape key. I strongly recommend that <f11> be set to
+# escape (esc).
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+# The Wyse 85 runs faster with XON/XOFF enabled. Also the
+# :DC: and :IC: work best when XON/XOFF is set. :IC: and
+# :DC: leave trash on the screen when used without XON/XOFF.
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy85|wyse85|wyse 85:\
+ :am:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=5*\E[%dL:DC=3*\E[%dP:DL=3*\E[%dM:DO=\E[%dB:\
+ :IC=4*\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=5\E[L:\
+ :as=^N:bl=^G:bt=\E[Z:cd=110\E[J:ce=1\E[K:cl=110\E[H\E[J:\
+ :cm=1\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:\
+ :dl=3\E[M:do=^J:ds=\E[40l:ec=\E[%dX:ei=\E[4l:\
+ :fs=\E[1;24r\E8:ho=\E[H:i1=\E[62;1"p\E[?5W:\
+ :i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=3:\
+ :is=16\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:\
+ :kl=\E[D:kr=\E[C:ks=\E[?1l\E=:ku=\E[A:le=^H:mb=\E[5m:\
+ :md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=3\n:so=\E[7m:sr=3\EM:st=\EH:ta=1\011:\
+ :ts=\E[40h\E7\E[25;%i%dH:ue=\E[m:up=\E[A:us=\E[4m:\
+ :vb=300\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:\
+ :tc=vt220+keypad:
+#
+# Wyse 85 with visual bell.
+wy85-vb|wyse85-vb|wyse 85 with visible bell:\
+ :bl@:vb=300\E[30h\E,\E[30l:tc=wy85:
+#
+# Wyse 85 in 132-column mode.
+wy85-w|wyse85-w|wyse 85 in 132-column mode:\
+ :co#132:ws#132:\
+ :rs=70\E[35h\E[?3h:tc=wy85:
+#
+# Wyse 85 in 132-column mode with visual bell.
+wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns:\
+ :bl@:tc=wy85-w:
+
+# From: Kevin Turner <[email protected]>, 12 Jul 1998
+# This copes with an apparent firmware bug in the wy85. He writes:
+# "What I did was change leave the terminal cursor keys set to Normal
+# (instead of application), and change \E[ to \233 for all the keys in
+# terminfo. At one point, I found some reference indicating that this
+# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
+# me), but I can't find that and the server under my bookmark to "Wyse
+# Technical" isn't responding. So there's the question of wether the wy85
+# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# or the actual."
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode:\
+ :am:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=5*\E[%dL:DC=3*\E[%dP:DL=3*\E[%dM:DO=\E[%dB:\
+ :IC=4*\E[%d@:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=5\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=110\E[J:ce=1\E[K:cl=110\E[H\E[J:\
+ :cm=1\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:\
+ :dl=3\E[M:do=^J:ds=\E[40l:ec=\E[%dX:ei=\E[4l:\
+ :fs=\E[1;24r\E8:ho=\E[H:i1=\E[62;1"p\E[?5W:\
+ :i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=3:\
+ :is=16\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:\
+ :k8=\23319~:k9=\23320~:kD=\2333~:kI=\2332~:kN=\2336~:\
+ :kP=\2335~:kb=^H:kd=\233B:ke=\E>:kh=\23326~:kl=\233D:\
+ :kr=\233C:ks=\E[?1l\E=:ku=\233A:le=^H:mb=\E[5m:md=\E[1m:\
+ :me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=3\n:so=\E[7m:sr=3\EM:st=\EH:ta=1\011:\
+ :ts=\E[40h\E7\E[25;%i%dH:ue=\E[m:up=\E[A:us=\E[4m:\
+ :vb=300\E[30h\E,\E[30l:ve=\E[?25h:vi=\E[?25l:
+#
+# Wyse 185 emulating a vt320 7 bit mode.
+#
+# This terminal always displays 25 lines. These lines may be used
+# as 24 data lines and a terminal status line (top or bottom) or
+# 25 data lines. The 48 and 50 line modes change the page size
+# and not the number of lines on the screen.
+#
+# The Compose Character key can be used as a meta key if changed
+# by set-up.
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy185|wyse185|wyse 185:\
+ :am:hs:km:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=3*\E[%dL:DC=3\E[%dP:DL=2*\E[%dM:DO=\E[%dB:IC=2\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=3\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=40\E[J:ce=\E[K:cl=40\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=20\E[%i%d;%dr:ct=\E[3g:dc=3\E[P:dl=2\E[M:do=^J:\
+ :ds=\E7\E[99;0H\E[K\E8:ec=\E[%dX:ei=\E[4l:\
+ :fs=\E[1;24r\E8:ho=\E[H:i1=\E[?5W:\
+ :i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=4:\
+ :is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:ke=\E>:kh=\E[26~:kl=\E[D:kr=\E[C:\
+ :ks=\E[?1l\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=2\n:\
+ :so=\E[7m:sr=2\EM:st=\EH:ta=^I:te=\E[ R:ti=\E[ Q:\
+ :ts=\E7\E[99;%i%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=100\E[30h\E,\E[30l:ve=\E[34h\E[?25h:vi=\E[?25l:\
+ :vs=\E[?25h\E[34l:tc=vt220+keypad:
+#
+# Wyse 185 with 24 data lines and top status (terminal status)
+wy185-24|wyse185-24|wyse 185 with 24 data lines:\
+ :hs@:\
+ :ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy185:
+#
+# Wyse 185 with visual bell.
+wy185-vb|wyse185-vb|wyse 185+flash:\
+ :bl@:tc=wy185:
+#
+# Wyse 185 in 132-column mode.
+wy185-w|wyse185-w|wyse 185 in 132-column mode:\
+ :co#132:ws#132:\
+ :DC=7\E[%dP:IC=7\E[%d@:dc=7\E[P:ei=:im=:ip=7:\
+ :rs=\E[35h\E[?3h:tc=wy185:
+#
+# Wyse 185 in 132-column mode with visual bell.
+wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols:\
+ :bl@:tc=wy185-w:
+
+# wy325 terminfo entries
+# Done by Joe H. Davis 3-9-92
+
+# lines 25 columns 80
+#
+wy325|wyse325|Wyse epc:\
+ :5i:am:bw:hs:mi:\
+ :Nl#8:co#80:lh#1:li#24:lw#8:pb#9601:ws#45:\
+ :#2=\E{:%9=\EP:&3=\Er:@8=\E7:F1=^AJ\r:F2=^AK\r:F3=^AL\r:\
+ :F4=^AM\r:F5=^AN\r:F6=^AO\r:LF=\EA11:LO=\EA10:RA=\Ed.:\
+ :SA=\Ed/:\
+ :ac=+/,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~:\
+ :ae=\EcD:al=3\EE:as=\EcE:bl=^G:bt=\EI:cd=50\EY:ce=4\ET:\
+ :cl=50\E+:cm=\E=%+ %+ :cr=^M:ct=\E0:dc=7\EW:dl=3\ER:do=^J:\
+ :ds=\EF\r:ei=\Er:fs=^M:ho=^^:i1=\EcB0\EcC1:i2=16\Ew0:\
+ :im=\Eq:ip=2:\
+ :is=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kA=\EE:kB=\EI:kD=\EW:\
+ :kE=\ET:kI=\Eq:kL=\ER:kN=\EK:kP=\EJ:kS=\EY:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:ll=^^^K:mb=\EG2:\
+ :me=\E(\EH\003\EG0\EcD:mh=\EGp:mp=\E):nd=^L:pf=^T:po=\Ed#:\
+ :ps=\EP:r1=30\E~!\E~4:r2=70\EeF\E`\072:r3=100\EwG\Ee(:\
+ :sf=3\n:so=\EGt:sr=2\Ej:st=\E1:ta=^I:te=\Ew0:ti=\Ew1:ts=\EF:\
+ :up=^K:vb=\E`8\E`9:ve=\E`1:vi=\E`0:tc=adm+sgr:
+
+#
+# lines 24 columns 80 vb
+#
+wy325-vb|wyse325-vb|wyse-325 with visual bell:\
+ :bl@:tc=wy325:
+
+#
+# lines 24 columns 132
+#
+wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode:\
+ :Nl#16:co#132:lw#7:ws#97:\
+ :cm=\Ea%i%dR%dC:dc=12\EW:ip=4:rs=70\E`;:tc=wy325:
+#
+# lines 25 columns 80
+#
+wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy325:
+#
+# lines 25 columns 132
+#
+wy325-25w|wyse325-25w|wy325 132 columns:\
+ :Nl@:lh@:li#25:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy325-w:
+#
+# lines 25 columns 132 vb
+#
+wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video:\
+ :bl@:tc=wy325-w:
+
+#
+# lines 42 columns 80
+#
+wy325-42|wyse325-42|wyse-325 42 lines:\
+ :Nl@:lh@:li#42:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy325:
+#
+# lines 42 columns 132
+#
+wy325-42w|wyse325-42w|wyse-325 42 lines wide mode:\
+ :Nl@:lh@:li#42:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy325-w:
+#
+# lines 42 columns 132 vb
+#
+wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell:\
+ :bl@:tc=wy325-w:
+#
+# lines 43 columns 80
+#
+wy325-43|wyse325-43|wyse-325 43 lines:\
+ :Nl@:lh@:li#43:lw@:\
+ :pn@:tc=wy325:
+#
+# lines 43 columns 132
+#
+wy325-43w|wyse325-43w|wyse-325 43 lines wide mode:\
+ :Nl@:lh@:li#43:lw@:\
+ :pn@:r3=100\EwG\Ee):tc=wy325-w:
+#
+# lines 43 columns 132 vb
+#
+wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell:\
+ :bl@:tc=wy325-w:
+
+# Wyse 370 -- 24 line screen with status line.
+#
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+#
+# If you change keyboards the terminal will send different
+# escape sequences.
+# The following definition is for the basic terminal without
+# function keys.
+#
+# <u0> -> enter Tektronix 4010/4014 mode
+# <u1> -> exit Tektronix 4010/4014 mode
+# <u2> -> enter ASCII mode (from any ANSI mode)
+# <u3> -> exit ASCII mode (goto native ANSI mode)
+# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
+# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
+#
+# Bug: The <op> capability resets attributes.
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy370-nk|wyse 370 without function keys:\
+ :am:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=2*\E[%dL:DC=1*\E[%dP:DL=2*\E[%dM:DO=\E[%dB:\
+ :IC=1*\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=2\E[L:\
+ :as=^N:bl=^G:bt=\E[Z:cd=40\E[J:ce=10\E[K:cl=40\E[H\E[J:\
+ :cm=1\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=1\E[P:\
+ :dl=2\E[M:do=^J:ds=\E[40l:ec=.1*\E[%dX:ei=\E[4l:\
+ :fs=\E[1;24r\E8:ho=\E[H:i1=6\E[90;1"p\E[?5W:\
+ :i2=\E>\017\E)0\E(B\E[63;0w\E[m:im=\E[4h:ip=1:\
+ :is=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h:\
+ :ke=\E>:ks=\E[?1l\E=:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=2\n:\
+ :so=\E[7m:sr=2\EM:st=\EH:ta=1\011:te=\E[ R:ti=\E[ Q:\
+ :ts=\E[40l\E[40h\E7\E[99;%i%dH:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:vb=300\E[30h\E,\E[30l:ve=\E[34h\E[?25h:\
+ :vi=\E[?25l:vs=\E[?25h\E[34l:
+#
+# Function key set for the ASCII (wy-50 compatible) keyboard
+# This is the default 370.
+#
+wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard:\
+ :@8=\EOM:F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:\
+ :F5=\E[28~:F6=\E[29~:k1=\E[?4i:k2=\E[?3i:k3=\E[2i:k4=\E[@:\
+ :k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kA=\EOP:kB=\E[Z:kD=\EOQ:kI=\EOP:kL=\EOQ:kN=\E[U:\
+ :kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :tc=wy370-nk:
+#
+# Function key set for the VT-320 (and wy85) compatible keyboard
+#
+wy370-105k|Wyse 370 with 105 key keyboard:\
+ :%1=\E[28~:*6=\E[4~:@0=\E[1~:F1=\E[23~:F2=\E[24~:\
+ :F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:\
+ :F8=\E[32~:F9=\E[33~:FA=\E[34~:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
+ :kP=\E[5~:kb=^H:kd=\E[B:kh=\E[26~:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :l1=PF1:l2=PF2:l3=PF3:l4=PF4:tc=wy370-nk:tc=vt220+keypad:
+#
+# Function key set for the PC compatible keyboard
+#
+wy370-EPC|Wyse 370 with 102 key keyboard:\
+ :@7=\E[1~:@8=\EOM:F1=\E[23~:F2=\E[24~:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:k;=\E[21~:kB=\E[Z:kI=\E[2~:kN=\E[U:kP=\E[V:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:tc=wy370-nk:
+#
+# Wyse 370 with visual bell.
+wy370-vb|Wyse 370 with visible bell:\
+ :bl@:tc=wy370:
+#
+# Wyse 370 in 132-column mode.
+wy370-w|Wyse 370 in 132-column mode:\
+ :co#132:ws#132:\
+ :rs=70\E[35h\E[?3h:tc=wy370:
+#
+# Wyse 370 in 132-column mode with visual bell.
+wy370-wvb|Wyse 370 with visible bell 132-columns:\
+ :vb=300\E[30h\E,\E[30l:tc=wy370-w:
+wy370-rv|Wyse 370 reverse video:\
+ :r3=\E[32h\E[?5h:tc=wy370:
+#
+# Wyse 99gt Tektronix 4010/4014 emulator,
+#
+wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator:\
+ :am:os:\
+ :co#74:li#35:\
+ :bl=^G:cl=\E^L:cr=^M:do=^J:ff=^L:\
+ :hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\
+ :ho=^]7`x @\037:\
+ :hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\
+ :is=\E8:le=^H:nd=\040:nw=^M^J:u0=\E~>\E8:u1=\E[42h:up=^K:
+#
+# Wyse 160 Tektronix 4010/4014 emulator,
+#
+wy160-tek|Wyse 160 Tektronix 4010/4014 emulator:\
+ :ho=^]8`g @\037:tc=wy99gt-tek:
+#
+# Wyse 370 Tektronix 4010/4014 emulator,
+#
+wy370-tek|Wyse 370 Tektronix 4010/4014 emulator:\
+ :am:os:\
+ :co#80:li#36:\
+ :bl=^G:cl=\E^L:cr=^M:do=^J:ff=^L:\
+ :hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037:\
+ :ho=^]8g @\037:\
+ :hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037:\
+ :is=\E8:kb=^H:kd=^J:kl=^H:kr=^I:ku=^K:le=^H:nd=\040:nw=^M^J:\
+ :u0=\E[?38h\E8:u1=\E[?38l\E)0:up=^K:
+
+# Vendor-supplied Wyse entries end here.
+
+#
+#TITLE: TERMINFO ENTRY WY520
+#DATE: 8/5/93
+# The WY520 terminfo is based on the WY285 entry published on the WYSE
+# BBS with the addition of more function keys and special keys.
+#
+# rs1 -> set personality
+# rs2 -> set number of columns
+# rs3 -> set number of lines
+# is1 -> select the proper font
+# is2 -> do the initialization
+# is3 -> If this string is empty then rs3 gets sent.
+#
+# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
+# - The BS key is programmed to generate BS in smcup since
+# is2 doesn't seem to work.
+# - Remove and shift/Remove: delete a character
+# - Insert : enter insert mode
+# - Find : delete to end of file
+# - Select : clear a line
+# - F11, F12, F13: send default sequences (not ESC, BS, LF)
+# - F14 : Home key
+# - Bottom status line (host writable line) is used.
+# - smkx,rmkx are removed because this would put the numeric
+# keypad in Dec application mode which doesn't seem to work
+# with SCO applications.
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+wy520|wyse520|wyse 520:\
+ :am:hs:km:mi:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=3*\E[%dL:DC=3\E[%dP:DL=2*\E[%dM:DO=\E[%dB:IC=2\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=3\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=40\E[J:ce=\E[K:cl=40\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=20\E[%i%d;%dr:ct=\E[3g:dc=30\E[P:dl=2\E[M:do=^J:\
+ :ds=\E[0$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:i1=\E[?5W:\
+ :i2=\E>\E(B\E)0\017\E[m:im=\E[4h:ip=4:\
+ :is=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[26~:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=2\n:\
+ :so=\E[7m:sr=2\EM:st=\EH:ta=^I:te=\E[ R:ti=\E[ Q\E[?67;8h:\
+ :ts=\E[2$~\E[1$}\E[%i%d`:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :ve=\E[34h\E[?25h:vi=\E[?25l:vs=\E[?25h\E[34l:\
+ :tc=vt220+keypad:
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+wy520-24|wyse520-24|wyse 520 with 24 data lines:\
+ :hs@:\
+ :ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy520:
+#
+# Wyse 520 with visual bell.
+wy520-vb|wyse520-vb|wyse 520 with visible bell:\
+ :vb=100\E[30h\E,\E[30l:tc=wy520:
+#
+# Wyse 520 in 132-column mode.
+wy520-w|wyse520-w|wyse 520 in 132-column mode:\
+ :co#132:ws#132:\
+ :DC=7\E[%dP:IC=7\E[%d@:dc=7\E[P:ei=:im=:ip=7:\
+ :rs=\E[35h\E[?3h:tc=wy520:
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns:\
+ :vb=100\E[30h\E,\E[30l:tc=wy520-w:
+#
+#
+# Wyse 520 emulating a vt420 7 bit mode.
+# The DEL key is programmed to generate BS in is2.
+# With EPC keyboard.
+# - 'End' key will clear till end of line on EPC keyboard
+# - Shift/End : ignored.
+# - Insert : enter insert mode.
+# - Delete : delete a character (have to change interrupt character
+# to CTRL-C: stty intr '^c') for it to work since the
+# Delete key sends 7FH.
+wy520-epc|wyse520-epc|wyse 520 with EPC keyboard:\
+ :@7=\E[4~:k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:\
+ :k4=\E[14~:k5=\E[15~:kD=\177:kE=\E[4~:kh=\E[H:tc=wy520:
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+# with EPC keyboard.
+wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard:\
+ :hs@:\
+ :ds@:fs@:r3=\E[?5l\E[47h\E[40l\E[1;24r:ts@:tc=wy520-epc:
+#
+# Wyse 520 with visual bell.
+wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard:\
+ :vb=100\E[30h\E,\E[30l:tc=wy520-epc:
+#
+# Wyse 520 in 132-column mode.
+wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard:\
+ :co#132:ws#132:\
+ :DC=7\E[%dP:IC=7\E[%d@:dc=7\E[P:ei=:im=:ip=7:\
+ :rs=\E[35h\E[?3h:tc=wy520-epc:
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard:\
+ :vb=100\E[30h\E,\E[30l:tc=wy520-epc-w:
+#
+# Wyse 520 in 80-column, 36 lines
+wy520-36|wyse520-36|wyse 520 with 36 data lines:\
+ :hs@:\
+ :li#36:\
+ :ds@:fs@:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r:ts@:\
+ :tc=wy520:
+#
+# Wyse 520 in 80-column, 48 lines
+wy520-48|wyse520-48|wyse 520 with 48 data lines:\
+ :hs@:\
+ :li#48:\
+ :ds@:fs@:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r:ts@:\
+ :tc=wy520:
+#
+# Wyse 520 in 132-column, 36 lines
+wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines:\
+ :co#132:ws#132:\
+ :r2=\E[?3h:\
+ :r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|:\
+ :tc=wy520-36:
+#
+# Wyse 520 in 132-column, 48 lines
+wy520-48w|wyse520-48w|wyse 520 with 48 data lines:\
+ :co#132:ws#132:\
+ :r2=\E[?3h:\
+ :r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|:\
+ :tc=wy520-48:
+#
+#
+# Wyse 520 in 80-column, 36 lines with EPC keyboard
+wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard:\
+ :hs@:\
+ :li#36:\
+ :ds@:fs@:r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r:ts@:\
+ :tc=wy520-epc:
+#
+# Wyse 520 in 80-column, 48 lines with EPC keyboard
+wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard:\
+ :hs@:\
+ :li#48:\
+ :ds@:fs@:r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r:ts@:\
+ :tc=wy520-epc:
+#
+# Wyse 520 in 132-column, 36 lines with EPC keyboard
+wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard:\
+ :co#132:ws#132:\
+ :r2=\E[?3h:\
+ :r3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|:\
+ :tc=wy520-36pc:
+#
+# Wyse 520 in 132-column, 48 lines with EPC keyboard
+wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard:\
+ :co#132:ws#132:\
+ :r2=\E[?3h:\
+ :r3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|:\
+ :tc=wy520-48pc:
+
+# From: John Gilmore <[email protected]>
+# (wyse-vp: removed :if=/usr/share/tabset/wyse-adds:, there's no such
+# file and we don't know what :st: is -- esr)
+wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :al=\EM:bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dc=\EW:\
+ :dl=\El:do=^J:ei=\Er:ho=^A:im=\Eq:is=\E`\072\E`9\017\Er:\
+ :kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A^Z:me=^O:\
+ :nd=^F:nw=^M^J:r1=\E`\072\E`9\017\Er:se=^O:sf=^J:so=^N:\
+ :ta=^I:ue=^O:up=^Z:us=^N:
+
+wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad:\
+ :is=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=:kb=^H:\
+ :kd=\EOB:ke=10\E[?1l\E>:kh=\EOH:kl=\EOD:kr=\EOC:\
+ :ks=10\E[?1h\E=:ku=\EOA:tc=wy75:
+
+# From: Eric Freudenthal <[email protected]>
+wy100q|Wyse 100 for Quotron:\
+ :bs:\
+ :co#80:li#24:sg#1:\
+ :al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=\EW:\
+ :dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:\
+ :is=\E`\072\200\EC\EDF\E0\E'\E(\EA21:kd=^J:kl=^H:kr=^L:\
+ :ku=^K:le=^H:mk@:nd=^L:sr=\Ej:up=^K:tc=adm+sgr:
+
+#### Kermit terminal emulations
+#
+# Obsolete Kermit versions may be listed in the section describing obsolete
+# non-ANSI terminal emulators later in the file.
+#
+
+# KERMIT standard all versions.
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <[email protected]> 9-25-84
+kermit|standard kermit:\
+ :bs:\
+ :co#80:li#24:\
+ :cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :do=\EB:ho=\EH:\
+ :is=K0 Standard Kermit 9-25-84\n:kd=^J:kh=^^:kl=^H:\
+ :kr=^L:ku=^K:le=^H:nd=\EC:up=\EA:
+kermit-am|standard kermit plus auto-margin:\
+ :am:\
+ :is=K1 Standard Kermit plus Automatic Margins\n:\
+ :tc=kermit:
+# IBMPC Kermit 1.2.
+# Bugs: :cd:, :ce:: do not work except at beginning of line! :cl: does
+# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
+# line).
+# From: greg small <[email protected]> 8-30-84
+pckermit|pckermit12|UCB IBMPC Kermit 1.2:\
+ :am:\
+ :li#25:\
+ :cd@:ce@:cl=\EH\EJ:\
+ :is=K2 UCB IBMPC Kermit 1.2 8-30-84\n:tc=kermit:
+# IBMPC Kermit 1.20
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Cannot use character insert because 1.20 goes crazy if insert at col 80.
+# Does not use :am: because autowrap is lost when kermit dropped and restarted.
+# From: greg small <[email protected]> 12-19-84
+pckermit120|UCB IBMPC Kermit 1.20:\
+ :it#8:li#24:\
+ :al=\EL:dc=\EN:dl=\EM:do=\EB:ei@:im@:\
+ :is=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n:\
+ :se=\Eq:so=\Ep:ta=^I:vs=\EO\Eq\EEK3:tc=kermit:
+# MS-DOS Kermit 2.27 for the IBMPC
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Does not use am: because autowrap is lost when kermit dropped and restarted.
+# Reverse video for standout like H19.
+# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <[email protected]> 3-17-85
+msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC:\
+ :am@:bs:\
+ :co#80:it#8:li#24:\
+ :al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dc=\EN:dl=\EM:\
+ :do=\EB:ei=\EO:ho=\EH:im=\E@:\
+ :is=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n:\
+ :kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:nd=\EC:rc=\Ek:sc=\Ej:\
+ :se=\Eq:so=\Ep:ta=^I:up=\EA:vs=\EO\Eq\EG\EwK4:
+# MS-DOS Kermit 2.27 with automatic margins
+# From: greg small <[email protected]> 3-17-85
+msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins:\
+ :am:\
+ :is=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n:\
+ :vs=\EO\Eq\EG\EvK5:tc=msk227:
+# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
+# Automatic margins now default. Use ansi :sa: for highlights.
+# Define function keys.
+# (msk22714: removed obsolete ":kn#10:" -- esr)
+# From: greg small <[email protected]> 3-17-85
+msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC:\
+ :am:\
+ :is=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n:\
+ :k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:\
+ :k8=\E8:k9=\E9:md=\E[1m:me=\E[m:mr=\E[7m:se=\E[m:so=\E[1m:\
+ :ue=\E[m:us=\E[4m:vs=\EO\Eq\EG\EvK6:tc=mskermit227:
+# This was designed for a VT320 emulator, but it is probably a good start
+# at support for the VT320 itself.
+# Please send changes with explanations to [email protected].
+# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+vt320-k3|MS-Kermit 3.00's vt320 emulation:\
+ :am:es:hs:km:mi:ms:xn:\
+ :co#80:it#8:li#49:pb#9600:vt#3:\
+ :AL=\E[%dL:CC=\E:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SR=\E[%dL:UP=\E[%dA:ae=\E(B:al=\E[L:\
+ :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :ds=\E[0$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\
+ :is=\E>\E F\E[?1l\E[?7h\E[r\E[2$~:k0=\E[21~:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+ :k9=\E[20~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:\
+ :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ts=\E[1$}\r\E[K:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l:ve=\E[?25h:\
+ :vi=\E[?25l:
+# From: Joseph Gil <[email protected]> 13 Dec 1991
+# ACS capabilities from Philippe De Muyter <[email protected]> 30 May 1996
+# (I removed a bogus boolean :mo: and added :ms:, <smam>, <rmam> -- esr)
+vt320-k311|dec vt320 series as defined by kermit 3.11:\
+ :am:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=3\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\
+ :fs=\E[$}:ho=\E[H:im=\E[4h:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
+ :le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:\
+ :r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:\
+ :se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:
+
+######## NON-ANSI TERMINAL EMULATIONS
+#
+
+#### Avatar
+#
+# These entries attempt to describe Avatar, a terminal emulation used with
+# MS-DOS bulletin-board systems. It was designed to give ANSI-like
+# capabilities, but with cheaper (shorter) control sequences. Messy design,
+# excessively dependent on PC idiosyncracies, but apparently rather popular
+# in the BBS world.
+#
+# No color support. Avatar doesn't fit either of the Tektronix or HP color
+# models that terminfo knows about. An Avatar color attribute is the
+# low 7 bits of the IBM-PC display-memory attribute. Bletch.
+#
+# I wrote these entries while looking at the Avatar spec. I don't have
+# the facilities to test them. Let me know if they work, or don't.
+#
+# Avatar escapes not used by these entries (because maybe you're smarter
+# and more motivated than I am and can figure out how to wrap terminfo
+# around some of them, and because they are weird enough to be funny):
+# level 0:
+# ^L -- clear window/reset current attribute to default
+# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
+#
+# bit: 6 5 4 3 2 1 0
+# | | | | |
+# +---+---+ | +---+---+
+# | | |
+# | | foreground color
+# | foreground intensity
+# background color
+# level 0+:
+# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
+# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
+# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
+# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
+# (^V^L and ^V^M set the current attribute as a side-effect.)
+# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
+# in the pattern, <c> the number of times the pattern
+# should be repeated. If either value is 0, no-op.
+# The pattern can contain Avatar console codes,
+# including other ^V ^Y patterns.
+# level 1:
+# ^V^O -- clockwise mode on; turn print direction right each time you
+# hit a window edge (yes, really). Turned off by CR
+# ^V^P -- no-op
+# ^V^Q%c -- query the driver
+# ^V^R -- driver reset
+# ^V^S -- Sound tone (PC-specific)
+# ^V^T -- change highlight at current cursor poition to %c
+# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
+# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
+# -- define window
+#
+# From: Eric S. Raymond <[email protected]> 1 Nov 1995
+# (The :mb:/:md:/:mr:/:as:/:us:/:so: capabilities exist only to
+# tell ncurses that the corresponding highlights exist; it should use :sa:,
+# which is the only method that will actually work for multiple highlights.)
+#
+# Update by TD - 2004: half of this was inconsistent. Found documentation
+# and repaired most of the damage. sgr0 is probably incorrect, but the
+# available documentation gives no clues for a workable string.
+avatar0|avatar terminal emulator level 0:\
+ :am:ms:ut:\
+ :co#80:it#8:li#25:\
+ :ae@:as@:ce=^V^G:cm=\026\010%.%.:cr=^M:do=^V^D:le=^V^E:\
+ :mb=^V^B:md=^V^A^P:me=^V^A^G:mk=^V^A\200:mr=^V^Ap:nd=^V^F:\
+ :rp=\031%.%.:rs=^L:sf=^J:so=^V^Ap:up=^V^C:us=^V^A^A:\
+ :tc=klone+acs:
+# From: Eric S. Raymond <[email protected]> 1 Nov 1995
+avatar0+|avatar terminal emulator level 0+:\
+ :dc=^V^N:ei=\026\n\200\200\200\200:im=^V^I:tc=avatar0:
+# From: Eric S. Raymond <[email protected]> 1 Nov 1995
+avatar|avatar1|avatar terminal emulator level 1:\
+ :RA=^V":SA=^V$:al=^V+:dl=^V-:ei=^V^P:ve=^V'^A:vi=^V'^B:\
+ :vs=^V^C:tc=avatar0+:
+
+#### RBcomm
+#
+# RBComm is a lean and mean terminal emulator written by the Interrupt List
+# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
+# '90s), especially in the BBS world, and still has some loyal users due to
+# its very small memory footprint and to a cute macro language.
+rbcomm|IBM PC with RBcomm and EMACS keybindings:\
+ :am:bw:mi:ms:xn:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DL=\E[%dM:al=^K:bl=^G:bt=\E[Z:cd=^F5:ce=^P^P:\
+ :cl=^L:cm=\037%r%+ %+ :cr=^M:cs=\E[%i%d;%dr:dc=^W:dl=^Z:\
+ :dm=:do=^C:ec=\E[%dX:ed=:ei=^]:im=^\:\
+ :is=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g:kb=^H:kd=^N:\
+ :ke=\E>:kh=^A:kl=^B:kr=^F:ks=\E=:ku=^P:le=^H:mb=\E[5m:\
+ :md=\E[1m:me=\E[m:mk=\E[8m:mr=^R:nd=^B:nw=^M\ED:\
+ :r1=\017\E(B\E)0\025\E[?3l\E[>8g:rc=\E8:rp=\030%.%.:\
+ :sc=\E7:se=^U:sf=\ED:so=^R:sr=\EM:ta=^I:te=:ti=:ue=^U:up=^^:\
+ :us=^T:ve=\E[?25h:vi=\E[?25l:
+rbcomm-nam|IBM PC with RBcomm without autowrap:\
+ :am@:\
+ :bl=^G:cr=^M:do=^J:\
+ :is=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g:kb=^H:kd=^J:\
+ :kl=^H:nw=^M^J:sf=^J:ta=^I:tc=rbcomm:
+rbcomm-w|IBM PC with RBcomm in 132 column mode:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:\
+ :is=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g:kb=^H:kd=^J:\
+ :kl=^H:nw=^M^J:sf=^J:ta=^I:tc=rbcomm:
+
+######## LCD DISPLAYS
+#
+
+#### Matrix Orbital
+# from: Eric Z. Ayers ([email protected])
+#
+# Matrix Orbital 20x4 LCD display
+# Command Character is 0xFE (decimal 254, octal 376)
+#
+# On this device, cursor addressability isn't possible. The LCD expects:
+# 0xfe G <col> <row>
+# for cup: %p1 == row and %p2 is column
+#
+# This line:
+# cup=\376G%p2%c%p1%c
+# LOOKS like it will work, but sometimes only one of the two numbers is sent.
+# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
+#
+# Alas, there is no cursor upline capability on this display.
+#
+# These entries add some 'sanity stuff' to the clear function. That is, it
+# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
+# and turns off the cursor blinking and stuff like that.
+#
+# NOTE: calling 'beep' turns on the backlight (bell)
+# NOTE: calling 'flash' turns it on and back off (visual bell)
+#
+MtxOrb|Generic Matrix Orbital LCD display:\
+ :bl=\376B^A:cl=\376X\376C\376R\376K\376T:ho=\376H:\
+ :le=\376L:nd=\376M:vb=\376B\001\376F:ve=\376K\376T:
+MtxOrb204|20x4 Matrix Orbital LCD display:\
+ :co#20:li#4:tc=MtxOrb:
+MtxOrb162|16x2 Matrix Orbital LCD display:\
+ :co#16:li#2:tc=MtxOrb:
+# The end
+
+######## OLDER TERMINAL TYPES
+#
+# This section is devoted to older commercial terminal brands that are now
+# discontinued, but known to be still in use or represented by emulations.
+#
+
+#### AT&T (att, tty)
+#
+# This section also includes Teletype-branded VDTs.
+#
+# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
+# Boundless Technologies); for details, see the header comment on the ADDS
+# section.
+#
+# These are AT&T's official terminfo entries. All-caps aliases have been
+# removed.
+#
+att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode:\
+ :am:eo:mi:ms:xo:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[11r:\
+ :F2=\E[12r:F3=\E[13r:F4=\E[14r:F5=\E[15r:F6=\E[16r:\
+ :IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:\
+ :cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :k1=\E[1r:k2=\E[2r:k3=\E[3r:k4=\E[4r:k5=\E[5r:k6=\E[6r:\
+ :k7=\E[7r:k8=\E[8r:k9=\E[9r:k;=\E[10r:kA=\E[L:kB=\E[Z:\
+ :kC=\E[J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:mr=\E[7m:nd=\E[C:\
+ :pf=\E[4i:po=\E[5i:ps=\E[0i:se=\E[m:sf=^J:so=\E[7m:ta=^I:\
+ :up=\E[A:
+att2350|AT&T 2350 Video Information Terminal 80 column mode:\
+ :pf@:po@:ps@:tc=att2300:
+
+# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
+# Seems upward compatible with vt100, plus ins/del line/char.
+# On sgr, the protection parameter is ignored.
+# No check is made to make sure that only 3 parameters are output.
+# standout= reverse + half-intensity = 3 | 5.
+# bold= reverse + underline = 2 | 3.
+# note that half-bright blinking doesn't look different from normal blinking.
+# NOTE:you must program the function keys first, label second!
+# (att4410: a BSD entry has been seen with the following capabilities:
+# :is=\E[?6l:, :k1=\EOc:, :k2=\EOd:, :k3=\EOe:, :k4=\EOg:,
+# :k6=\EOh:, :k7=\EOi:, :k8=\EOj:, -- esr)
+att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1:\
+ :am:hs:mi:ms:xo:\
+ :Nl#8:co#80:it#8:lh#2:li#24:lw#8:ws#80:\
+ :ac=++,,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ei=:fs=\E8:ho=\E[H:i1=\E[?3l\E)0:\
+ :i2=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW:\
+ :ic=\E[@:im=:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:\
+ :k6=\EOU:k7=\EOV:k8=\EOW:kC=\E[2J:kH=\E[24;1H:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
+ :mb=\E[5m:md=\E[2;7m:me=\E[0m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
+ :nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[25;%+^AH:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+
+att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1:\
+ :co#132:ws#132:\
+ :i1=\E[?3h\E)0:rs=\Ec\E[?3h\E[2;0y:tc=att5410v1:
+
+att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2:\
+ :bs:tc=att5410v1:
+
+att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode:\
+ :co#132:ws#132:\
+ :i1=\E[?3h\E)0:rs=\Ec\E[?3h\E[2;0y:tc=att4410:
+
+# 5410 in terms of a vt100
+# (v5410: added <rmam>/<smam> based on init string -- esr)
+v5410|att5410 in terms of a vt100:\
+ :am:mi:ms:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :RA=\E[?7l:SA=\E[?7h:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
+ :ic=\E[@:im=:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[0m:\
+ :mr=2\E[7m:nd=2\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=^J:so=2\E[1;7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:tc=vt100+fnkeys:
+
+#
+# Teletype Model 5420 -- A souped up 5410, with multiple windows,
+# even! the 5420 has three modes: scroll, window or page mode
+# this terminfo should work in scroll or window mode, but doesn't
+# take advantage of any of the differences between them.
+#
+# Has memory below (2 lines!)
+# 3 pages of memory (plus some spare)
+# The 5410 sequences for :cm:, :vs:, :DC:, :DL:, :ec:, :vb:, :ho:,
+# <hpa>, :st: would work for these, but these work in both scroll and window
+# mode... Unset insert character so insert mode works
+# :i1: sets 80 column mode,
+# :is: escape sequence:
+# 1) turn off all fonts
+# 2) function keys off, keyboard lock off, control display off,
+# insert mode off, erasure mode off,
+# 3) full duplex, monitor mode off, send graphics off, nl on lf off
+# 4) reset origin mode
+# 5) set line wraparound
+# 6) exit erasure mode, positional attribute mode, and erasure extent mode
+# 7) clear margins
+# 8) program ENTER to transmit ^J,
+# We use \212 to program the ^J because a bare ^J will get translated by
+# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
+# 1 2 3 4 5 6 7 8
+# :i3: set screen color to black,
+# No representation in terminfo for the delete word key: kdw1=\Ed
+# Key capabilities assume the power-up send sequence...
+# This :te: is not strictly necessary, but it helps maximize
+# memory usefulness: :te=\Ez:,
+# Alternate sgr0: :me=\E[m\EW^O:,
+# Alternate sgr: :sa=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;:,
+# smkx programs the SYS PF keys to send a set sequence.
+# It also sets up labels f1, f2, ..., f8, and sends edit keys.
+# This string causes them to send the strings :k1:-:k8:
+# when pressed in SYS PF mode.
+# (att4415: I added <rmam>/<smam> based on the init string -- esr)
+att4415|tty5420|att5420|AT&T 4415/5420 80 cols:\
+ :bs:db:mi:xo:\
+ :Nl#8:lh#2:lm#78:lw#8:ws#55:\
+ :@1=\Et:@7=\Ez:@8=\Eent:AL=\E[%dL:CM=\E[%i%d;%dt:\
+ :DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:LF=\E|:\
+ :LO=\E~:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dE:SR=\E[%dF:\
+ :UP=\E[%dA:bt=\E[Z:ch=\E[%+^AG:cl=\E[x\E[J:\
+ :cm=\E[%i%d;%dx:ct=\E[3g:cv=\E[%+^Ad:ec=\E[%ds\E[%dD:\
+ :ei=\E[4l:ho=\E[x:i1=100\E[?3l:i2=\E[?5l:ic@:im=\E[4h:\
+ :is=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212:\
+ :k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
+ :k8=\EOj:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\E[2K:kF=\E[T:kH=\Eu:\
+ :kI=\E[4h:kL=\E[M:kN=\E[U:kP=\E[V:kR=\E[S:\
+ :ke=\E[19;0j\E[21;1j\212:ks=\E[19;1j\E[21;4j\Eent:\
+ :l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:ll=\Ew:\
+ :me=\E[0m\017:mp=\EV:pf=\E[?9i:po=\E[?4i:ps=\E[?2i:st=\EH:\
+ :ts=\E7\E[25;%+^HH:vb=\E[?5h\E[?5l:ve=\E[11;0j:\
+ :vs=\E[11;1j:tc=att4410:
+
+att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols:\
+ :co#132:lm#54:ws#97:\
+ :i1=100\E[?3h:tc=att4415:
+
+att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv:\
+ :i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415:
+
+att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv:\
+ :co#132:lm#54:ws#97:\
+ :i1=100\E[?3h:i2=\E[?5h:vb=\E[?5l\E[?5h:tc=att4415:
+
+# Note that this mode permits programming USER PF KEYS and labels
+# However, when you program user pf labels you have to reselect
+# user pf keys to make them appear!
+att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels:\
+ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:
+
+att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels:\
+ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415:
+
+att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels:\
+ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-rv:
+
+att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels:\
+ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:tc=att4415-w:
+
+att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels:\
+ :k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:tc=att4415+nl:\
+ :tc=att4415-w-rv:
+
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att5420_2|AT&T 5420 model 2 80 cols:\
+ :am:db:hs:mi:ms:xo:\
+ :co#80:it#8:li#24:lm#78:ws#55:\
+ :AL=\E[%dL:CM=\E[%i%d;%dt:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:\
+ :UP=\E[%dA:ae=^O:al=\E[L:as=^N:bt=\E[1Z:cd=\E[0J:ce=\E[0K:\
+ :cl=\EH\EJ:cm=\E[%i%d;%dH:cr=\EG:cs=\E[%i%d;%dr:ct=\E[3g:\
+ :dc=\E[P:dl=\E[M:do=\E[1B:ec=\E[%ds\E[%dD:ei=:fs=\E8:\
+ :ho=\E[H:\
+ :i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\
+ :ic=\E[@:im=:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\
+ :k6=\EOh:k7=\EOi:k8=\EOj:kD=\E[P:kH=\Eu:kI=\E[4h:kN=\E[U:\
+ :kP=\E[V:kb=^H:kd=\E[B:ke=\E[19;0j:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ks=\E[19;1j:ku=\E[A:le=^H:ll=\Ew:mb=\E[5m:me=\E[0m:\
+ :mh=\E[2m:mr=\E[7m:nd=\E[1C:nw=^M^J:rc=\E8:\
+ :rs=\Ec\E[?3l\E[2;0y:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
+ :st=\EH:ta=^I:ts=\E7\E[25;%+^HH:ue=\E[m:up=\E[1A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:ve=\E[11;0j:vs=\E[11;1j:
+att5420_2-w|AT&T 5420 model 2 in 132 column mode:\
+ :co#132:\
+ :i1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r:\
+ :tc=att5420_2:
+
+att4418|att5418|AT&T 5418 80 cols:\
+ :am:xo:\
+ :co#80:li#24:\
+ :@8=\E[:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[n:\
+ :F2=\E[o:F3=\E[H:F4=\E[I:F5=\E[J:F8=\E[K:F9=\E[L:FA=\E[E:\
+ :FB=\E[_:FC=\E[M:FD=\E[N:FE=\E[O:IC=\E[%d@:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[1L:as=^N:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[1P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
+ :i1=\E[?3l:ic=\E[1@:im=:is=\E)0\E?6l\E?5l:k1=\E[h:k2=\E[i:\
+ :k3=\E[j:k6=\E[k:k7=\E[l:k8=\E[f:k9=\E[w:k;=\E[m:kC=\E[%%:\
+ :kd=\EU:kh=\Ec:kl=\E@:kr=\EA:ku=\ES:le=\E[D:mb=\E[5m:\
+ :me=\E[m\017:mh=\E[2m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m:
+att4418-w|att5418-w|AT&T 5418 132 cols:\
+ :co#132:\
+ :i1=\E[?3h:tc=att5418:
+
+att4420|tty4420|teletype 4420:\
+ :bs:da:db:eo:ms:ul:xo:\
+ :co#80:li#24:lm#72:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\Ez:cl=\EH\EJ:cm=\EY%+ %+ :cr=\EG:\
+ :dc=\EP:dl=\EM:dm@:do=\EB:ed@:ho=\EH:k0=\EU:k3=\E@:kA=\EL:\
+ :kB=\EO:kC=\EJ:kD=\EP:kF=\ES:kI=\E\136:kL=\EM:kR=\ET:kd=\EB:\
+ :kh=\EH:kl=^H:kr=\EC:ku=\EA:l0=segment advance:\
+ :l3=cursor tab:le=\ED:nd=\EC:se=\E~:sf=\EH\EM\EY7\040:\
+ :so=\E}:ue=\EZ:up=\EA:us=\E\\:
+
+# The following is a terminfo entry for the Teletype 4424
+# asynchronous keyboard-display terminal. It supports
+# the vi editor. The terminal must be set up as follows,
+#
+# HIGHLIGHT DEFINITION 3-TONE
+# DISPLAY FUNCTION GROUP III
+#
+# The second entry below provides limited (a la adm3a)
+# operation under GROUP II.
+#
+# This must be used with DISPLAY FUNCTION GROUP I or III
+# and HIGHLIGHT DEFINITION 3-TONE
+# The terminal has either bold or blink, depending on options
+#
+# (att4424: commented out :ti:=\E[1m, we don't need bright locked on -- esr)
+att4424|tty4424|teletype 4424:\
+ :am:bs:xo:\
+ :co#80:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E(B:al=\EL:as=\E(0:bl=^G:bt=\EO:cd=\EJ:ce=\Ez:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\EF:\
+ :dc=\EP:dl=\EM:do=\EB:ei=:ho=\E[H:ic=\E\136:im=:\
+ :is=\E[20l\E[?7h:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kC=\EJ:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E3:\
+ :md=\E3:me=\EX\E~\EZ\E4\E(B:mh=\EW:mr=\E}:nd=\EC:nw=\EE:\
+ :se=\E~:sf=^J:so=\E}:sr=\ET:st=\EH:ta=^I:ue=\EZ:up=\EA:\
+ :us=\E\\:
+
+att4424-1|tty4424-1|teletype 4424 in display function group I:\
+ :kC@:kd=\EB:kh@:kl=\ED:kr=\EC:ku=\EA:tc=att4424:
+
+# This entry is not one of AT&T's official ones, it was translated from the
+# 4.4BSD termcap file. The highlight strings are different from att4424.
+# I have no idea why this is -- older firmware version, maybe?
+# The following two lines are the comment originally attached to the entry:
+# This entry appears to avoid the top line - I have no idea why.
+# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
+att4424m|tty4424m|teletype 4424M:\
+ :am:da:db:mi:\
+ :co#80:it#8:li#23:\
+ :al=\EL:bl=^G:ce=\E[K:cl=\E[2;H\E[J:cm=\E[%i%2;%2H\E[B:\
+ :cr=^M:dc=\EP:dl=\EM:do=^J:ei=:ic=\E\136:im=:ip=2:\
+ :is=\E[m\E[2;24r:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:\
+ :nd=\E[C:nw=^M^J:se=\E[m:sf=^J:so=\E[7m:sr=\ET:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+
+# The Teletype 5425 is really version 2 of the Teletype 5420. It
+# is quite similar, except for some minor differences. No page
+# mode, for example, so all of the :cm: sequences used above have
+# to change back to what's being used for the 5410. Many of the
+# option settings have changed their numbering as well.
+#
+# This has been tested on a preliminary model.
+#
+# (att5425: added <rmam>/<smam> based on the init string -- esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att5425|tty5425|att4425|AT&T 4425/5425:\
+ :am:da:db:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:lm#78:ws#55:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
+ :al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:ec=\E[%ds\E[%dD:ei=\E[4l:fs=\E8:ho=\E[H:\
+ :i1=100\E<\E[?3l:i2=\E[?5l:im=\E[4h:\
+ :is=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212:\
+ :k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
+ :k8=\EOj:kD=\E[P:kI=\E[4h:kb=^H:kd=\E[B:\
+ :ke=\E[21;0j\E[25;1j\212:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ks=\E[21;1j\E[25;4j\Eent\E~:ku=\E[A:le=^H:ll=\E[24H:\
+ :mb=\E[5m:md=\E[2;7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
+ :nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:sc=\E7:se=\E[m:sf=^J:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E7\E[25;%+^HH:ue=\E[m:\
+ :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[12;0j:\
+ :vs=\E[12;1j:
+
+att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels:\
+ :ks=\E[21;1j\E[25;4j\Eent:tc=att4425:
+
+att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode:\
+ :co#132:lm#54:ws#97:\
+ :i1=100\E[?3h:tc=tty5425:
+
+# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
+# I also added <rmam>/<smam> -- esr)
+att4426|tty4426|teletype 4426S:\
+ :am:da:db:xo:\
+ :co#80:li#24:lm#48:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\
+ :SR=\E[%dT:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E(B:al=\EL:as=\E(0:bl=^G:cd=\E[J:ce=\E[0K:ch=\E[%dG:\
+ :cl=\E[H\E[2J\E[1U\E[H\E[2J\E[1V:cm=\E[%i%d;%dH:cr=^M:\
+ :ct=\E[3g:cv=\E[%dd:dc=\EP:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
+ :i1=\Ec\E[?7h:ic=\E\136:im=:is=\E[m\E[1;24r:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:\
+ :kB=\EO:kC=\E[2J:kH=\E[24;1H:kb=^H:kd=\EB:kh=\E[H:kl=\ED:\
+ :kr=\EC:ku=\EA:le=\E[D:ll=\E[24H:md=\E[5m:me=\E[m\E(B:\
+ :mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:rs=\Ec\E[?3l\E[2;0y:\
+ :sc=\E7:se=\E[m:sf=^J:so=\E[5m:sr=\ET:st=\E1:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+
+# Terminfo entry for the AT&T 510 A Personal Terminal
+# Function keys 9 - 16 are available only after the
+# screen labeled (soft keys/action blocks) are labeled. Function key
+# 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# This entry is based on one done by Ernie Rice at Summit, NJ and
+# changed by Anne Gallup, Skokie, IL, ttrdc!anne
+att510a|bct510a|AT&T 510A Personal Terminal:\
+ :am:mi:ms:xn:xo:\
+ :Nl#8:co#80:lh#2:li#24:lw#7:\
+ :#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:F6=\EOj:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:\
+ :ac=+g,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\
+ :ce=\E[0K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
+ :dc=\E[P:dl=\E[M:do=\E[B:eA=\E(B\E)1:ff=^L:ho=\E[H:\
+ :i1=\E(B\E)1\E[2l:i2=\E[21;1|\212:k1=\EOm:k2=\EOV:\
+ :k3=\EOu:k4=\ENj:k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:k9=\EOc:\
+ :k;=\EOd:kB=\E[Z:kF=\E[S:kR=\E[T:kb=^H:kd=\E[B:ke=\E[19;0|:\
+ :kl=\E[D:kr=\E[C:ks=\E[19;1|:ku=\E[A:le=^H:mb=\E[5m:\
+ :md=\E[2;7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :pf=\E[?8i:po=\E[?4i:ps=\E[0i:rc=\E8:sc=\E7:se=\E[m:sf=^J:\
+ :so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
+ :ve=\E[11;3|:vi=\E[11;0|:vs=\E[11;2|:
+
+# Terminfo entry for the AT&T 510 D Personal Terminal
+# Function keys 9 through 16 are accessed by bringing up the
+# system blocks.
+# Function key 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# There are problems with soft key labeling. These are due to
+# strangenesses in the native terminal that are impossible to
+# describe in a terminfo.
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+att510d|bct510d|AT&T 510D Personal Terminal:\
+ :am:da:db:mi:ms:xn:xo:\
+ :Nl#8:co#80:lh#2:li#24:lm#48:lw#7:\
+ :#4=\E[u:%i=\E[v:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F1=\EOe:F2=\EOf:F3=\EOg:F4=\EOh:F5=\EOi:F6=\EOj:IC=\E[%d@:\
+ :LE=\E[%dD:LF=\E<:LO=\E?:MC=\E\072:ML=\E4:MR=\E5:RI=\E[%dC:\
+ :RX=\E[29;1|:SF=\E[%dS:SR=\E[%dT:SX=\E[29;0|:UP=\E[%dA:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[0J:\
+ :ce=\E[0K:ch=\E[%+^AG:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:dl=\E[M:do=\E[B:eA=\E(B\E)1:\
+ :ei=\E[4l:ff=^L:ho=\E[H:i1=\E(B\E)1\E[5;0|:\
+ :i2=\E[21;1|\212:im=\E[4h:k1=\EOm:k2=\EOV:k3=\EOu:k4=\ENj:\
+ :k5=\ENe:k6=\ENf:k7=\ENh:k8=\E[H:k9=\EOc:k;=\EOd:kB=\E[Z:\
+ :kF=\E[S:kR=\E[T:kb=^H:kd=\E[B:ke=\E[19;0|:kl=\E[D:kr=\E[C:\
+ :ks=\E[19;1|:ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:md=\E[2;7m:\
+ :me=\E[0m:mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :pf=\E[?8i:po=\E[?4i:ps=\E[0i:rc=\E8:rs=\E[5;0|:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
+ :us=\E[4m:ve=\E[11;3|:vs=\E[11;2|:
+
+# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att500|att513|AT&T 513 using page mode:\
+ :am:mi:ms:xn:xo:\
+ :co#80:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dE:SR=\E[%dF:UP=\E[%dA:ae=^O:\
+ :al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dc=1\E[P:\
+ :dl=\E[M:do=^J:ei=\E[4l:ho=\E[H:\
+ :i1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l:\
+ :im=\E[4h:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:\
+ :k7=\EOi:k8=\EOj:kD=\ENf:kI=\ENj:kN=\E[U:kP=\E[V:kb=^H:\
+ :kd=\E[B:ke=\E[19;0|\E[21;1|\212:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ks=\E[19;1|\E[21;4|\Eent:ku=\E[A:le=^H:ll=\E#2:mb=\E[5m:\
+ :md=\E[2;7m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[11;0|:vs=\E[11;1|:
+
+# 01-07-88
+# printer must be set to EMUL ANSI to accept ESC codes
+# :up: stops at top margin
+# :i1: sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
+# and alt font ascii,wrap on,tabs cleared
+# :is: disables newline on LF,Emphasized off
+# The <u0> capability sets form length
+att5310|att5320|AT&T Model 53210 or 5320 matrix printer:\
+ :YA:YD:\
+ :Ya#8192:Yi#10:Yj#12:Yk#100:Yl#72:Ym#120:co#132:it#8:li#66:\
+ :DO=\E[%de:RI=\E[%da:ZM=\E[5m:ZU=\E[m:Zl=\E[;%dr:\
+ :Zm=\E[%+^As:Zn=\E[;%+^As:Zp=\E[%dr:ch=\E[%d`:cr=^M:\
+ :cv=\E[%dd:do=^J:ff=^L:i1=\Ec:is=\E[20l\r:nd=\040:ta=^I:\
+ :u0=\E[%dt:up=\EM:
+
+# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
+# The following SET-UP modes are assumed for normal operation:
+# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for the Resident Terminal Mode.
+# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# The BRL entry also said: UNSAFE :ll=\E[70H:
+att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs:\
+ :am:xo:\
+ :co#88:it#8:li#70:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\
+ :SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ho=\E[H:\
+ :ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:r1=\Ec:\
+ :rc=\E8:sc=\E7:sf=^J:sr=\E[T:ta=^I:up=\E[A:
+
+# 5620 terminfo (2.0 or later ROMS with char attributes)
+# The following SET-UP modes are assumed for normal operation:
+# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for Resident Terminal Mode. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# assumptions: :sf: (scroll forward one line) is only done at screen bottom
+# Be aware that older versions of the dmd have a firmware bug that affects
+# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
+# :ms: is from an otherwise inferior BRL for this terminal. That entry
+# also has :ll:=\E[70H commented out and marked unsafe.
+# For more, see the 5620 FAQ maintained by David Breneman <[email protected]>.
+att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns:\
+ :NL:NP:am:bs:ms:xo:\
+ :co#88:it#8:li#70:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:SF=\E[%dS:\
+ :SR=\E[%dT:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
+ :ic=\E[@:im=:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[2m:me=\E[0m:mh=\E[2m:\
+ :mr=\E[7m:nd=\E[C:nw=^J:r1=\Ec:rc=\E8:sc=\E7:se=\E[0m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
+att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer:\
+ :li#24:tc=att5620:
+att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer:\
+ :li#34:tc=att5620:
+# 5620 layer running the "S" system's downloaded graphics handler:
+att5620-s|tty5620-s|layer|vitty|5620 S layer:\
+ :am:bs:pt:\
+ :co#80:it#8:li#72:\
+ :al=\EI:bl=^G:ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dl=\ED:\
+ :do=^J:kC=\E[2J:kH=\E[70;1H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:sf=^J:ta=^I:up=^K:vb=\E^G:
+
+# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
+#
+# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
+# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att605|AT&T 605 80 column 102key keyboard:\
+ :am:eo:xo:\
+ :co#80:li#24:ws#80:\
+ :DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:ae=^O:al=\E[L:as=\E)0\016:\
+ :bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\
+ :i1=\E[8;0|\E[?\E[13;20l\E[?\E[12h:ic=\E[@:im=\E[4h:\
+ :is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:\
+ :k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kD=\E[P:kI=\E[@:kN=\E[U:\
+ :kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m\017:mh=\E[2m:\
+ :mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+att605-pc|ATT 605 in pc term mode:\
+ :@7=\E[F:S4=250\E[?11l\E[50;1|:S5=400\E[50;0|:XF=g:XN=e:\
+ :ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
+ :al=\E[L:bt=\E[Z:dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:im=:\
+ :k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:\
+ :k8=\E[T:k9=\E[U:k;=\E[V:kB=\E[Z:kD=\E[P:kI=\E[@:kL=\E[M:\
+ :kN=\E[G:kP=\E[I:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=\E[D:nd=\E[C:up=\E[A:tc=att605:
+att605-w|AT&T 605-w 132 column 102 key keyboard:\
+ :co#132:ws#132:\
+ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0:\
+ :tc=att605:
+# (att610: I added <rmam>/<smam> based on the init string. I also
+# added :SF: and :SR: because the BSD file says the att615s have them,
+# and the 615 is like a 610 with a big keyboard, and most of their other
+# smart terminals support the same sequence -- esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att610|AT&T 610; 80 column; 98key keyboard:\
+ :am:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:\
+ :al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ei=\E[4l:fs=\E8:ho=\E[H:\
+ :i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0:\
+ :i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
+ :k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
+ :nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
+ :sr=\EM:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
+ :vs=\E[?12;25h:
+att610-w|AT&T 610; 132 column; 98key keyboard:\
+ :co#132:ws#132:\
+ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
+ :tc=att610:
+
+att610-103k|AT&T 610; 80 column; 103key keyboard:\
+ :!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:%2=\ENi:\
+ :%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:\
+ :%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\
+ :%h=\EOY:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:\
+ :&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:\
+ :*2=\END:*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\
+ :*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:\
+ :@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:F4@:k9@:k;@:kD=\ENf:\
+ :kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att610:
+att610-103k-w|AT&T 610; 132 column; 103key keyboard:\
+ :co#132:ws#132:\
+ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
+ :tc=att610-103k:
+att615|AT&T 615; 80 column; 98key keyboard:\
+ :#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:\
+ :FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:\
+ :FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\
+ :FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\
+ :FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:tc=att610:
+att615-w|AT&T 615; 132 column; 98key keyboard:\
+ :#4=\E[ A:%i=\E[ @:F5=\EOC:F6=\EOD:F7=\EOE:F8=\EOF:F9=\EOG:\
+ :FA=\EOH:FB=\EOI:FC=\EOJ:FD=\ENO:FE=\ENP:FF=\ENQ:FG=\ENR:\
+ :FH=\ENS:FI=\ENT:FJ=\EOP:FK=\EOQ:FL=\EOR:FM=\EOS:FN=\EOw:\
+ :FO=\EOx:FP=\EOy:FQ=\EOm:FR=\EOt:FS=\EOu:FT=\EOv:FU=\EOl:\
+ :FV=\EOq:FW=\EOr:FX=\EOs:FY=\EOp:FZ=\EOn:Fa=\EOM:\
+ :tc=att610-w:
+att615-103k|AT&T 615; 80 column; 103key keyboard:\
+ :#4=\E[ A:%i=\E[ @:tc=att610-103k:
+att615-103k-w|AT&T 615; 132 column; 103key keyboard:\
+ :#4=\E[ A:%i=\E[ @:tc=att610-103k-w:
+# (att620: I added <rmam>/<smam> based on the init string and
+# :SR:/:SF: from a BSD termcap -- esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att620|AT&T 620; 80 column; 98key keyboard:\
+ :am:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :ae=\E(B\017:al=\E[L:as=\E)0\016:bl=^G:bt=\E[Z:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:ho=\E[H:\
+ :i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h:\
+ :i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
+ :k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m\E(B\017:mh=\E[2m:mr=\E[7m:\
+ :nd=\E[C:nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[m:sf=\ED:\
+ :so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[25;%i%dx:ue=\E[m:up=\E[A:\
+ :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
+ :vs=\E[?12;25h:
+att620-w|AT&T 620; 132 column; 98key keyboard:\
+ :co#132:ws#132:\
+ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
+ :tc=att620:
+att620-103k|AT&T 620; 80 column; 103key keyboard:\
+ :!1=\EOO:!2=\EOP:!3=\EOS:#1=\EOM:%0=\EOt:%1=\EOm:%2=\ENi:\
+ :%3=\EOl:%4=\ENc:%5=\ENh:%6=\EOv:%7=\EOr:%8=\ENg:%9=\EOz:\
+ :%a=\EOL:%b=\ENC:%c=\ENH:%d=\EOR:%e=\ENG:%f=\EOZ:%g=\EOT:\
+ :%h=\EOY:%j=\EOQ:&0=\EOW:&1=\EOb:&2=\ENa:&3=\EOy:&4=\EOB:\
+ :&5=\EOq:&6=\EOo:&7=\EOp:&8=\EOs:&9=\ENB:*0=\EOX:*1=\EOU:\
+ :*2=\END:*3=\EON:*4=\ENF:*5=\ENE:*6=\ENI:*7=\ENN:*8=\EOA:\
+ :*9=\EOK:@0=\EOx:@1=\E9:@2=\EOw:@3=\EOV:@4=\EOu:@5=\ENd:\
+ :@6=\EOn:@7=\E0:@8=^M:@9=\EOk:F1@:F2@:F3@:F4@:F5@:F6@:F7@:F8@:\
+ :F9@:FA@:FB@:FC@:FD@:FE@:FF@:FG@:FH@:FI@:FJ@:FK@:FL@:FM@:FN@:FO@:FP@:\
+ :FQ@:FR@:FS@:FT@:FU@:FV@:FW@:FX@:FY@:FZ@:Fa@:k9@:k;@:kD=\ENf:\
+ :kE=\EOa:kI=\ENj:kL=\ENe:kM=\ENj:kN=\E[U:kP=\E[V:tc=att620:
+
+att620-103k-w|AT&T 620; 132 column; 103key keyboard:\
+ :co#132:ws#132:\
+ :i1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h:\
+ :tc=att620-103k:
+
+# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
+# The following SETUP modes are assumed for normal operation:
+# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
+# Font_Size=Large Non-Layers_Window_Cols=80
+# Non-Layers_Window_Rows=60
+# Other SETUP modes may be set for operator convenience or communication
+# requirements. Some capabilities assume a printer attached to the Aux EIA
+# port. This termcap description is for the Fixed Non-Layers Window. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (att630: added :ic:, :mb: and :mh: from a BSD termcap file -- esr)
+att630|AT&T 630 windowing terminal:\
+ :NP:am:bs:da:db:mi:ms:xo:\
+ :co#80:it#8:li#60:lm#0:\
+ :@8=^M:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\ENq:\
+ :F2=\ENr:F3=\ENs:F4=\ENt:F5=\ENu:F6=\ENv:F7=\ENw:F8=\ENx:\
+ :F9=\ENy:FA=\ENz:FB=\EN{:FC=\EN|:FD=\EN}:FE=\EN~:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :al=\E[L:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:is=\E[m:k9=\ENo:k;=\ENp:\
+ :kA=\E[L:kB=\E[Z:kC=\E[2J:kD=\E[P:kI=\E[@:kL=\E[M:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\
+ :me=\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^M^J:pf=\E[?4i:\
+ :po=\E[?5i:rc=\E8:rs=\Ec:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\
+ :sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines:\
+ :li#24:tc=att630:
+
+# This is the att700 entry for 700 native emulation of the AT&T 700
+# terminal. Comments are relative to changes from the 605V2 entry and
+# att730 on which the entry is based. Comments show the terminfo
+# capability name, termcap name, and description.
+#
+# Here is what's going onm in the init string:
+# ESC [ 50;4| set 700 native mode (really is 605)
+# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
+# ESC [ 53;0| set GenFlow to Xon/Xoff
+# ESC [ 8 ;0| set CR on NL
+# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
+# ESC [ ? 4 l jump scroll
+# ESC [ ? 5 l/h video: normal (l); reverse (h)
+# ESC [ ?13 l Labels on
+# ESC [ ?15 l parity check = no
+# ESC [ 13 l monitor mode off
+# ESC [ 20 l LF on NL (not CRLF on NL)
+# ESC [ ? 7 h autowrap on
+# ESC [ 12 h local echo off
+# ESC ( B GO = ASCII
+# ESC ) 0 G1 = Special Char & Line Drawing
+# ESC [ ? 31 l Set 7 bit controls
+#
+# Note: Most terminals, especially the 600 family use Reverse Video for
+# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
+# Assume we should stay with reverse video for 70.. However, the 605V2 exits
+# standout mode with \E[m (all normal attributes). The 730 entry simply
+# exits reverse video which would leave other current attributes intact. It
+# was assumed the 730 entry to be more correct so rmso has changed. The
+# 605V2 has no sequences to turn individual attributes off, thus its setting
+# and the rmso/smso settings from the 730.
+#
+# Note: For the same reason as above in rmso I changed exit under-score mode
+# to specifically turn off underscore, rather than return to all normal
+# attributes
+#
+# Note: The following pkey_xmit is taken from the 605V2 which contained the
+# capability as pfxl. It was changed here to pfx since pfxl
+# will only compile successfully with Unix 4.0 tic. Also note that pfx only
+# allows strings to be parameters and label values must be programmed as
+# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
+# and strings to be parameters. The 605V2 pfx entry should be examined later
+# in this regard. For reference the 730 pfxl entry is shown here for comparison
+# 730 pfx entry:
+# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
+# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+#
+# (for 4.0 tic)
+# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# (for <4.0 tic)
+# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
+#
+# Port1 Interface
+#
+# modular 10 pin Connector
+# Left side Right side
+# Pin 1 2 3 4 5 6 7 8 9 10
+#
+# Key (notch) at bottom
+#
+# Pin 1 DSR
+# 3 DCD
+# 4 DTR
+# 5 Sig Ground
+# 6 RD
+# 7 SD
+# 8 CTS
+# 9 RTS
+# 10 Frame Ground
+#
+# The manual is 189 pages and is loaded with details about the escape codes,
+# etc..... Available from AT&T CIC 800-432-6600...
+# ask for Document number 999-300-660..
+#
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att700|AT&T 700 24x80 column display w/102key keyboard:\
+ :am:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
+ :fs=\E8:ho=\E[H:i2=\E(B\E)0:im=\E[4h:\
+ :is=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017:\
+ :k1=\EOc:k2=\EOd:k3=\EOe:k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:\
+ :k8=\EOj:k9=\ENo:kD=\E[P:kI=\E[@:kN=\E[U:kP=\E[V:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:ll=\E[24H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
+ :nw=\EE:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:\
+ :st=\EH:ta=^I:ts=\E7\E[99;%i%dx:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
+ :vs=\E[?12;25h:
+
+# This entry was modified 3/13/90 by JWE.
+# fixes include additions of <enacs>, correcting :rp:, and modification
+# of <kHOM>. (See comments below)
+# att730 has status line of 80 chars
+# These were commented out: :SF=\E[%p1%dS:, :SR=\E[%p1%dT:,
+# the <kf25> and up keys are used for shifted system Fkeys
+# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
+# currently the same as :kh: (unshifted HOME or \E[H). On the 102, 102+1
+# and 122 key keyboards, the 730's translation is \E[2J. For consistency
+# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
+# 102, 102+1, or 122 key keyboards
+# kHOM=\E[2J,
+# (att730: I added <rmam>/<smam> based on the init string -- esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+att730|AT&T 730 windowing terminal:\
+ :am:da:db:es:hs:mi:ms:xn:xo:\
+ :co#80:it#8:li#60:lm#0:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:fs=\E8:\
+ :ho=\E[H:\
+ :i1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B:\
+ :i2=\E(B\E)0:im=\E[4h:is=\E[m\017:k1=\EOc:k2=\EOd:k3=\EOe:\
+ :k4=\EOf:k5=\EOg:k6=\EOh:k7=\EOi:k8=\EOj:k9=\ENo:kI=\E[@:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[0m:mh=\E[2m:mr=\E[7m:nd=\E[C:\
+ :nw=\EE:rc=\E8:rs=\Ec\E[?3l:sc=\E7:se=\E[27m:sf=\ED:\
+ :so=\E[7m:sr=\EM:ta=^I:ts=\E7\E[;%i%dx:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h\E[?12l:vi=\E[?25l:\
+ :vs=\E[?12;25h:
+att730-41|730MTG-41|AT&T 730-41 windowing terminal Version:\
+ :li#41:tc=att730:
+att730-24|730MTG-24|AT&T 730-24 windowing terminal Version:\
+ :li#24:tc=att730:
+att730r|730MTGr|AT&T 730 rev video windowing terminal Version:\
+ :i1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B:\
+ :vb=\E[?5l\E[?5h:tc=att730:
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version:\
+ :li#41:tc=att730r:
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version:\
+ :li#24:tc=att730r:
+
+# The following represents the screen layout along with the associated
+# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
+# not appear on the screen but are shown to reference the bezel buttons.
+# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
+# position relative to the screen.
+#
+#
+#
+# +----------------------------------------------------------------+
+# | |
+# XXXX | kf0 kf24 | XXXX
+# | |
+# | |
+# XXXX | kf1 kf23 | XXXX
+# | |
+# | |
+# XXXX | kf2 kf22 | XXXX
+# | |
+# | |
+# XXXX | kf3 kf21 | XXXX
+# | |
+# | |
+# XXXX | kf4 kf20 | XXXX
+# | |
+# | |
+# XXXX | kf5 kf19 | XXXX
+# | |
+# | |
+# XXXX | kf6 kf18 | XXXX
+# | |
+# | |
+# XXXX | | XXXX
+# | |
+# | |
+# +----------------------------------------------------------------+
+#
+# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+#
+# Note: XXXX represents the screen buttons
+# CMD REDRAW
+#
+# MAIL
+#
+# version 1 note:
+# The character string sent by key 'kf26' may be user programmable
+# to send either \E[16s, or \E[26s.
+# The character string sent by key 'krfr' may be user programmable
+# to send either \E[17s, or \E[27s.
+#
+# Depression of the "CMD" key sends \E! (kcmd)
+# Depression of the "MAIL" key sends \E[26s (kf26)
+# "REDRAW" same as "REFRESH" (krfr)
+#
+# "kf" functions adds carriage return to output string if terminal is in
+# 'new line' mode.
+#
+# The following are functions not covered in the table above:
+#
+# Set keyboard character (SKC): \EPn1;Pn2w
+# Pn1= 0 Back Space key
+# Pn1= 1 Break key
+# Pn2= Program char (hex)
+#
+# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
+# Pn1= Window number (1-39)
+# Pn2-Pn5= Y;X;Y;X coordinates
+#
+# Screen Selection (SSL): \E[Pnu
+# Pn= Window number
+#
+# Set Terminal Modes (SM): \E[Pnh
+# Pn= 3 Graphics mode
+# Pn= > Cursor blink
+# Pn= < Enter new line mode
+# Pn= = Enter reverse insert/replace mode
+# Pn= ? Enter no scroll mode
+#
+# Reset Terminal Mode (RM): \E[Pnl
+# Pn= 3 Exit graphics mode
+# Pn= > Exit cursor blink
+# Pn= < Exit new line mode
+# Pn= = Exit reverse insert/replace mode
+# Pn= ? Exit no scroll mode
+#
+# Screen Status Report (SSR): \E[Pnp
+# Pn= 0 Request current window number
+# Pn= 1 Request current window dimensions
+#
+# Device Status Report (DSR): \E[6n Request cursor position
+#
+# Call Status Report (CSR): \E[Pnv
+# Pn= 0 Call failed
+# Pn= 1 Call successful
+#
+# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
+# Pn1= Button number to be loaded
+# Pn2= Character count of "string"
+# Pn3= Key mode being loaded:
+# 0= Unshifted
+# 1= Shifted
+# 2= Control
+# String= Text string (15 chars max)
+#
+# Screen Number Report (SNR): \E[Pnp
+# Pn= Screen number
+#
+# Screen Dimension Report (SDR): \E[Pn1;Pn2r
+# Pn1= Number of rows available in window
+# Pn2= Number of columns available in window
+#
+# Cursor Position Report (CPR): \E[Pn1;Pn2R
+# Pn1= "Y" Position of cursor
+# Pn2= "X" Position of cursor
+#
+# Request Answer Back (RAB): \E[c
+#
+# Answer Back Response (ABR): \E[?;*;30;VSV
+# *= 0 No printer available
+# *= 2 Printer available
+# V= Software version number
+# SV= Software sub version number
+# (printer-available field not documented in v1)
+#
+# Screen Alignment Aid: \En
+#
+# Bell (lower pitch): \E[x
+#
+# Dial Phone Number: \EPdstring\
+# string= Phone number to be dialed
+#
+# Set Phone Labels: \EPpstring\
+# string= Label for phone buttons
+#
+# Set Clock: \EPchour;minute;second\
+#
+# Position Clock: \EPsY;X\
+# Y= "Y" coordinate
+# X= "X" coordinate
+#
+# Delete Clock: \Epr\
+#
+# Programming The Function Buttons: \EPfPn;string\
+# Pn= Button number (00-06, 18-24)
+# (kf00-kf06, kf18-kf24)
+# string= Text to sent on button depression
+#
+# The following in version 2 only:
+#
+# Request For Local Directory Data: \EPp12;\
+#
+# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+#
+# Request for Local Directory Data in print format: \EPp13;\
+#
+# Enable 'Prt on Line' mode: \022 (DC2)
+#
+# Disable 'Prt on Line' mode: \024 (DC4)
+#
+
+# 05-Aug-86:
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 2 and later.
+att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal:\
+ :am:xo:\
+ :co#80:it#8:li#24:\
+ :&2=\E[27s:@4=\E!:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :F8=\E[18s:F9=\E[19s:FA=\E[20s:FB=\E[21s:FC=\E[22s:\
+ :FD=\E[23s:FE=\E[24s:FG=\E[26s:LE=\E[%dD:RA=\E[11;1j:\
+ :RI=\E[%dC:SA=\E[11;0j:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cb=\E[2K:cd=\E[0J:\
+ :ce=\E[0K:cl=\E[2J\E[H:cm=\E[%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ei=\E[4l:ho=\E[H:\
+ :i1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l:\
+ :im=\E[4h:k0=\E[00s:k1=\E[01s:k2=\E[02s:k3=\E[03s:\
+ :k4=\E[04s:k5=\E[05s:k6=\E[06s:kb=^H:kd=\E[B:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:r1=\Ec:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[1m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:\
+ :ve=\E[>l:vs=\E[>h:
+
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 1.
+att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines:\
+ :li#24:\
+ :RA@:SA@:pf@:po@:rc@:sc@:tc=att505:
+tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines:\
+ :li#22:tc=att505:
+#
+#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
+# This cut mark helps make life less painful for people running ncurses tic
+# on machines with relatively little RAM. The file can be broken in half here
+# cleanly and compiled in sections -- no `use' references cross this cut
+# going forward.
+#
+
+#### Ampex (Dialogue)
+#
+# Yes, these are the same people who are better-known for making audio- and
+# videotape. I'm told they are located in Redwood City, CA.
+#
+
+# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
+# (ampex80: some capabilities merged in from SCO's entry -- esr)
+ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80:\
+ :am:bs:bw:ul:\
+ :co#80:it#8:li#24:\
+ :al=5*\EE:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=75\E*:cm=\E=%+ %+ :\
+ :cr=^M:ct=\E3:dc=\EW:dl=5*\ER:do=^J:ei=:ic=\EQ:im=:is=\EA:\
+ :le=^H:nd=^L:se=\Ek:sf=^J:so=\Ej:st=\E1:ta=^I:ue=\Em:up=^K:\
+ :us=\El:
+# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
+ampex175|ampex d175:\
+ :am:\
+ :co#80:li#24:\
+ :al=\EE:bl=^G:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :cr=^M:\
+ :dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:is=\EX\EA\EF:\
+ :kA=\EE:kD=\EW:kI=\EQ:kL=\ER:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\
+ :le=^H:ll=^^^K:nd=^L:se=\Ek:sf=^J:so=\Ej:te=\EF:ti=\EN:\
+ :ue=\Em:up=^K:us=\El:
+# No backspace key in the main QWERTY cluster. Fortunately, it has a
+# NEWLINE/PAGE key just above RETURN that sends a strange single-character
+# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
+# mode), this key can be used as the erase key; I find I like this. Because
+# some people and some systems may not, there is another termcap ("ampex175")
+# that suppresses this little eccentricity by omitting the relevant capability.
+ampex175-b|ampex d175 using left arrow for erase:\
+ :kb=^_:tc=ampex175:
+# From: Richard Bascove <[email protected]>
+# (ampex210: removed obsolete ":kn#10:" -- esr)
+ampex210|a210|ampex a210:\
+ :am:bs:hs:xn:\
+ :co#80:it#8:li#24:sg#1:\
+ :al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :dc=\EW:\
+ :dl=\ER:ei=:fs=\E.2:ho=^^:ic=\EQ:if=/usr/share/tabset/std:\
+ :im=:is=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En:\
+ :k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:k5=^A5\r:\
+ :k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^V:kh=^^:kl=^H:\
+ :kr=^L:ku=^K:le=^H:mk@:nd=^L:ta=^I:ts=\E.0\Eg\E}\Ef:up=^K:\
+ :vb=\EU\EX\EU\EX\EU\EX\EU\EX:tc=adm+sgr:
+# (ampex219: I added <rmam>/<smam> based on the init string, added :vs:
+# from ampex219w, added :ve:=\E[?3l, irresistibly suggested by :vs:,
+# and moved the padding to be *after* the caps -- esr)
+ampex219|ampex-219|amp219|Ampex with Automargins:\
+ :hs:xn:\
+ :co#80:it#8:li#24:\
+ :RA=\E[?7l:SA=\E[?7h:bl=^G:bt=\E[Z:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[2J:cm=5\E[%i%d;%dH:cr=^M:cs=%i\E[%2;%2r:\
+ :do=\E[B:ho=\E[H:\
+ :is=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k0=\E[21~:\
+ :k1=\E[7~:k2=\E[8~:k3=\E[9~:k4=\E[10~:k5=\E[11~:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:kd=\E[B:ke=\E>:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:\
+ :me=2\E[m:mh=\E[1m:mr=\E[7m:nd=2\E[C:se=2\E[m:sf=^J:\
+ :so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:\
+ :ve=\E[?3l:vs=\E[?3h:
+ampex219w|ampex-219w|amp219w|Ampex 132 cols:\
+ :co#132:li#24:\
+ :bl=^G:cr=^M:do=^J:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :sf=^J:tc=ampex219:
+# (ampex232: removed :if=/usr/share/tabset/ampex:, no file and no :st: --esr)
+ampex232|ampex-232|Ampex Model 232:\
+ :am:\
+ :co#80:li#24:sg#1:\
+ :al=5*\EE:bt=\EI:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:\
+ :dl=5*\ER:do=^V:ei=:ic=\EQ:im=:is=\Eg\El:k0=^A@\r:k1=^AA\r:\
+ :k2=^AB\r:k3=^AC\r:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:\
+ :k8=^AH\r:k9=^AI\r:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
+ :mk@:nd=^L:ta=^I:up=^K:vb=\Eb\Ed:ve=\E.4:vi=\E.0:tc=adm+sgr:
+# (ampex: removed :if=/usr/share/tabset/amp-132:, no file and no :st: -- esr)
+ampex232w|Ampex Model 232 / 132 columns:\
+ :co#132:li#24:\
+ :is=\E\034Eg\El:tc=ampex232:
+
+#### Ann Arbor (aa)
+#
+# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
+# numbers of function keys. At least some used monitors in portrait mode,
+# allowing up to 76-character screen heights! They were reachable at:
+#
+# Ann Arbor Terminals
+# 6175 Jackson Road
+# Ann Arbor, MI 48103
+# (313)-663-8000
+#
+# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
+# can't be found on the Web; I fear they're long dead. R.I.P.
+#
+
+
+# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
+# Highly modified 6/22 by Mike O'Brien.
+# split out into several for the various screen sizes by dave-yost@rand
+# Modifications made 3/82 by Mark Horton
+# Modified by Tom Quarles at UCB for greater efficiency and more diversity
+# status line moved to top of screen, :vb: removed 5/82
+# Some unknown person at SCO then hacked the init strings to make them more
+# efficient.
+#
+# assumes the following setup:
+# A menu: 0000 1010 0001 0000
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# C menu: 56 66 0 0 9600 0110 1100
+# D menu: 0110 1001 1 0
+#
+# Briefly, the settings are for the following modes:
+# (values are for bit set/clear with * indicating our preference
+# and the value used to test these termcaps)
+# Note that many of these settings are irrelevent to the terminfo
+# and are just set to the default mode of the terminal as shipped
+# by the factory.
+#
+# A menu: 0000 1010 0001 0000
+# Block/underline cursor*
+# blinking/nonblinking cursor*
+# key click/no key click*
+# bell/no bell at column 72*
+#
+# key pad is cursor control*/key pad is numeric
+# return and line feed/return for :cr: key *
+# repeat after .5 sec*/no repeat
+# repeat at 25/15 chars per sec. *
+#
+# hold data until pause pressed/process data unless pause pressed*
+# slow scroll/no slow scroll*
+# Hold in area/don't hold in area*
+# functions keys have default*/function keys disabled on powerup
+#
+# show/don't show position of cursor during page transmit*
+# unused
+# unused
+# unused
+#
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# Baud rate (9600*)
+#
+# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
+# 1 stop bit*/2 stop bits
+# parity error detection off*/on
+#
+# keyboard local/on line*
+# half/full duplex*
+# disable/do not disable keyboard after data transmission*
+#
+# transmit entire page/stop transmission at cursor*
+# transfer/do not transfer protected characters*
+# transmit all characters/transmit only selected characters*
+# transmit all selected areas/transmit only 1 selected area*
+#
+# transmit/do not transmit line separators to host*
+# transmit/do not transmit page tab stops tabs to host*
+# transmit/do not transmit column tab stop tabs to host*
+# transmit/do not transmit graphics control (underline,inverse..)*
+#
+# enable*/disable auto XON/XOFF control
+# require/do not require receipt of a DC1 from host after each LF*
+# pause key acts as a meta key/pause key is pause*
+# unused
+#
+# unused
+# unused
+# unused
+# unused
+#
+# XON character (17*)
+# XOFF character (19*)
+#
+# C menu: 56 66 0 0 9600 0110 1100
+# number of lines to print data on (printer) (56*)
+#
+# number of lines on a sheet of paper (printer) (66*)
+#
+# left margin (printer) (0*)
+#
+# number of pad chars on new line to printer (0*)
+#
+# printer baud rate (9600*)
+#
+# printer parity: 00=odd,01=even*,10=space,11=mark
+# printer stop bits: 2*/1
+# print/do not print guarded areas*
+#
+# new line is: 01=LF,10=CR,11=CRLF*
+# unused
+# unused
+#
+# D menu: 0110 1001 1 0
+# LF is newline/LF is down one line, same column*
+# wrap to preceding line if move left from col 1*/don't wrap
+# wrap to next line if move right from col 80*/don't wrap
+# backspace is/is not destructive*
+#
+# display*/ignore DEL character
+# display will not/will scroll*
+# page/column tab stops*
+# erase everything*/erase unprotected only
+#
+# editing extent: 0=display,1=line*,2=field,3=area
+#
+# unused
+#
+
+annarbor4080|aa4080|ann arbor 4080:\
+ :am:bs:\
+ :co#80:li#40:\
+ :bl=^G:cl=2\014:cr=^M:ct=^\^P^P:do=^J:ho=^K:kb=^^:kd=^J:\
+ :kh=^K:kl=^H:kr=^_:ku=^N:le=^H:nd=^_:sf=^J:st=^]^P1:ta=^I:\
+ :up=^N:
+
+# Strange Ann Arbor terminal from BRL
+aas1901|Ann Arbor K4080 w/S1901 mod:\
+ :am:\
+ :co#80:li#40:\
+ :bl=^G:cl=^L:cr=^M:do=^J:ho=^K:kb=^H:kd=^J:kl=^H:le=^H:\
+ :ll=^O\200c:nd=^_:nw=^M^J:sf=^J:ta=^I:up=^N:
+
+# If you're using the GNU termcap library, add
+# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
+# to these capabilities. This is the nonstandard GNU termcap scrolling
+# capability, arguments are:
+# 1. Total number of lines on the screen.
+# 2. Number of lines above desired scroll region.
+# 3. Number of lines below (outside of) desired scroll region.
+# 4. Total number of lines on the screen, the same as the first parameter.
+# The generic Ann Arbor entry is the only one that uses this.
+# (sgr removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly):\
+ :am:bs:km:mi:xo:\
+ :co#80:it#8:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=4*\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=3\E[L:bl=^G:bt=\E[Z:\
+ :cd=\E[J:ce=5\E[K:cl=156\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=^K:ei=:ho=\E[H:\
+ :i1=\E[m\E7\E[H\E9\E8:i2=\E[1Q\E[>20;30l\EP`+x~M\E\\:\
+ :ic=4\E[@:im=:k1=\EOA:k2=\EOB:k3=\EOC:k4=\EOD:k5=\EOE:\
+ :k6=\EOF:k7=\EOG:k8=\EOH:k9=\EOI:kD=\E[P:kI=\E[@:kb=^H:\
+ :kd=\E[B:\
+ :ke=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\:\
+ :kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ks=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\:\
+ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mm=\E[>52h:\
+ :mo=\E[>52l:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=^K:\
+ :so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+
+aaa+rv|ann arbor ambassador in reverse video:\
+ :i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\
+ :me=\E[7m\016:mk=\E[7;8m:mr=\E[m:r1=156\E[H\E[7m\E[J:\
+ :se=\E[7m:so=\E[m:ue=\E[7m:us=\E[4;7m:
+# Ambassador with the DEC option, for partial vt100 compatibility.
+aaa+dec|ann arbor ambassador in dec vt100 mode:\
+ :ac=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}:\
+ :ae=^N:as=^O:cs=\E[%i%d;%dr:eA=\E(0:
+aaa-18|ann arbor ambassador/18 lines:\
+ :li#18:\
+ :is=\E7\E[60;0;0;18p\E8:te=\E[60;0;0;18p\E[60;1H\E[K:\
+ :ti=\E[18;0;0;18p:tc=aaa+unk:
+aaa-18-rv|ann arbor ambassador/18 lines+reverse video:\
+ :tc=aaa+rv:tc=aaa-18:
+aaa-20|ann arbor ambassador/20 lines:\
+ :li#20:\
+ :is=\E7\E[60;0;0;20p\E8:te=\E[60;0;0;20p\E[60;1H\E[K:\
+ :ti=\E[20;0;0;20p:tc=aaa+unk:
+aaa-22|ann arbor ambassador/22 lines:\
+ :li#22:\
+ :is=\E7\E[60;0;0;22p\E8:te=\E[60;0;0;22p\E[60;1H\E[K:\
+ :ti=\E[22;0;0;22p:tc=aaa+unk:
+aaa-24|ann arbor ambassador/24 lines:\
+ :li#24:\
+ :is=\E7\E[60;0;0;24p\E8:te=\E[60;0;0;24p\E[60;1H\E[K:\
+ :ti=\E[24;0;0;24p:tc=aaa+unk:
+aaa-24-rv|ann arbor ambassador/24 lines+reverse video:\
+ :tc=aaa+rv:tc=aaa-24:
+aaa-26|ann arbor ambassador/26 lines:\
+ :li#26:\
+ :is=\E7\E[60;0;0;26p\E8:te=\E[60;0;0;26p\E[26;1H\E[K:\
+ :ti=\E[H\E[J\E[26;0;0;26p:tc=aaa+unk:
+aaa-28|ann arbor ambassador/28 lines:\
+ :li#28:\
+ :is=\E7\E[60;0;0;28p\E8:te=\E[60;0;0;28p\E[28;1H\E[K:\
+ :ti=\E[H\E[J\E[28;0;0;28p:tc=aaa+unk:
+aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status:\
+ :es:hs:\
+ :li#29:\
+ :ds=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K:\
+ :fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;30p\E8:\
+ :te=\E[60;1;0;30p\E[29;1H\E[K:\
+ :ti=\E[H\E[J\E[30;1;0;30p\E[30;1H\E[K:\
+ :ts=\E[>51h\E[1;%dH\E[2K:tc=aaa+unk:
+aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video:\
+ :tc=aaa+rv:tc=aaa-30-s:
+aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context:\
+ :te=\E[60;1;0;30p\E[59;1H\E[K:\
+ :ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s:
+aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video:\
+ :te=\E[60;1;0;30p\E[59;1H\E[K:\
+ :ti=\E[30;1H\E[K\E[30;1;0;30p:tc=aaa-30-s-rv:
+aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines:\
+ :li#30:\
+ :is=\E7\E[60;0;0;30p\E8:te=\E[60;0;0;30p\E[30;1H\E[K:\
+ :ti=\E[H\E[J\E[30;0;0;30p:tc=aaa+unk:
+aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video:\
+ :tc=aaa+rv:tc=aaa-30:
+aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context:\
+ :te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:\
+ :tc=aaa-30:
+aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context:\
+ :te=\E[60;0;0;30p\E[60;1H\E[K:ti=\E[30;0;0;30p:\
+ :tc=aaa+rv:tc=aaa-30:
+aaa-36|ann arbor ambassador/36 lines:\
+ :li#36:\
+ :is=\E7\E[60;0;0;36p\E8:te=\E[60;0;0;36p\E[36;1H\E[K:\
+ :ti=\E[H\E[J\E[36;0;0;36p:tc=aaa+unk:
+aaa-36-rv|ann arbor ambassador/36 lines+reverse video:\
+ :tc=aaa+rv:tc=aaa-36:
+aaa-40|ann arbor ambassador/40 lines:\
+ :li#40:\
+ :is=\E7\E[60;0;0;40p\E8:te=\E[60;0;0;40p\E[40;1H\E[K:\
+ :ti=\E[H\E[J\E[40;0;0;40p:tc=aaa+unk:
+aaa-40-rv|ann arbor ambassador/40 lines+reverse video:\
+ :tc=aaa+rv:tc=aaa-40:
+aaa-48|ann arbor ambassador/48 lines:\
+ :li#48:\
+ :is=\E7\E[60;0;0;48p\E8:te=\E[60;0;0;48p\E[48;1H\E[K:\
+ :ti=\E[H\E[J\E[48;0;0;48p:tc=aaa+unk:
+aaa-48-rv|ann arbor ambassador/48 lines+reverse video:\
+ :tc=aaa+rv:tc=aaa-48:
+aaa-60-s|ann arbor ambassador/59 lines+status:\
+ :es:hs:\
+ :li#59:\
+ :ds=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K:\
+ :fs=\E[>51l:is=\r\n\E[A\E7\E[60;1;0;60p\E8:\
+ :ts=\E[>51h\E[1;%dH\E[2K:tc=aaa+unk:
+aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video:\
+ :tc=aaa+rv:tc=aaa-60-s:
+aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video:\
+ :tc=aaa+dec:tc=aaa+rv:tc=aaa-60-s:
+aaa-60|ann arbor ambassador/60 lines:\
+ :li#60:\
+ :is=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8:tc=aaa+unk:
+aaa-60-rv|ann arbor ambassador/60 lines+reverse video:\
+ :tc=aaa+rv:tc=aaa-60:
+aaa-db|ann arbor ambassador 30/destructive backspace:\
+ :bs@:\
+ :i2=\E[1Q\E[m\E[>20l\E[>30h:le=\E[D:tc=aaa-30:
+
+guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols:\
+ :li#33:\
+ :i2=\E[>59l:is=\E7\E[255;0;0;33;80;80p\E8\E[J:\
+ :te=\E[255p\E[255;1H\E[K:ti=\E[33p:vb=\E[>59h\E[>59l:\
+ :tc=aaa+unk:
+guru+rv|guru changes for reverse video:\
+ :i2=\E[>59h:vb=\E[>59l\E[>59h:
+guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video:\
+ :tc=guru+rv:tc=guru-33:
+guru+s|guru status line:\
+ :es:hs:\
+ :ds=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K:fs=\E[>51l:\
+ :te=\E[255;1p\E[255;1H\E[K:ti=:ts=\E[>51h\E[1;%dH\E[2K:
+guru-nctxt|guru with no saved context:\
+ :ti=\E[H\E[J\E[33p\E[255;1H\E[K:tc=guru:
+guru-s|guru-33-s|ann arbor guru/33 lines+status:\
+ :li#32:\
+ :is=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J:\
+ :ti=\E[33;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
+guru-24|ann arbor guru 24 lines:\
+ :co#80:li#24:\
+ :is=\E7\E[255;0;0;24;80;80p\E8\E[J:ti=\E[24p:\
+ :tc=guru+unk:
+guru-44|ann arbor guru 44 lines:\
+ :co#97:li#44:\
+ :is=\E7\E[255;0;0;44;97;100p\E8\E[J:ti=\E[44p:\
+ :tc=guru+unk:
+guru-44-s|ann arbor guru/44 lines+status:\
+ :li#43:\
+ :is=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J:\
+ :ti=\E[44;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
+guru-76|guru with 76 lines by 89 cols:\
+ :co#89:li#76:\
+ :is=\E7\E[255;0;0;76;89;100p\E8\E[J:ti=\E[76p:\
+ :tc=guru+unk:
+guru-76-s|ann arbor guru/76 lines+status:\
+ :co#89:li#75:\
+ :is=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J:\
+ :ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
+guru-76-lp|guru-lp|guru with page bigger than line printer:\
+ :co#134:li#76:\
+ :is=\E7\E[255;0;0;76;134;134p\E8\E[J:ti=\E[76p:\
+ :tc=guru+unk:
+guru-76-w|guru 76 lines by 178 cols:\
+ :co#178:li#76:\
+ :is=\E7\E[255;0;0;76;178;178p\E8\E[J:ti=\E[76p:\
+ :tc=guru+unk:
+guru-76-w-s|ann arbor guru/76 lines+status+wide:\
+ :co#178:li#75:\
+ :is=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J:\
+ :ti=\E[76;1p\E[255;1H\E[K:tc=guru+s:tc=guru+unk:
+guru-76-wm|guru 76 lines by 178 cols with 255 cols memory:\
+ :co#178:li#76:\
+ :is=\E7\E[255;0;0;76;178;255p\E8\E[J:ti=\E[76p:\
+ :tc=guru+unk:
+aaa-rv-unk|ann arbor unknown type:\
+ :Nl#0:lh#0:lw#0:\
+ :ho=\E[H:i1=\E[7m\E7\E[H\E9\E8:mb=\E[5;7m:md=\E[1;7m:\
+ :me=\E[7m:mk=\E[7;8m:mr=\E[m:r1=\E[H\E[7m\E[J:se=\E[7m:\
+ :so=\E[m:ue=\E[7m:us=\E[4;7m:
+
+#### Applied Digital Data Systems (adds)
+#
+# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
+# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
+# terminals was merged again. Then AT&T sold the terminal business to
+# SunRiver, which later changed its name to Boundless Technologies. The
+# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
+# as of early 1995) are at:
+#
+# Boundless Technologies
+# 100 Marcus Boulevard
+# Hauppauge, NY 11788-3762
+# Vox: (800)-231-5445
+# Fax: (516)-342-7378
+# Web: http://boundless.com
+#
+# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
+# In 1995 Boundless acquired DEC's terminals business.
+#
+
+# Regent: lowest common denominator, works on all regents.
+# (regent: renamed ":bc:" to ":le:" -- esr)
+regent|Adds Regent Series:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cl=^L:cr=^M:do=^J:ho=\EY\040\040:le=^U:ll=^A:nd=^F:\
+ :sf=^J:up=^Z:
+# Regent 100 has a bug where if computer sends escape when user is holding
+# down shift key it gets confused, so we avoid escape.
+regent100|Adds Regent 100:\
+ :sg#1:ug#1:\
+ :bl=^G:cm=\013%+ \020%B%.:k0=^B1\r:k1=^B2\r:k2=^B3\r:\
+ :k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:l1=F2:\
+ :l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:me=\E0@:se=\E0@:so=\E0P:\
+ :ue=\E0@:us=\E0`:tc=regent:
+regent20|Adds Regent 20:\
+ :bl=^G:cd=\Ek:ce=\EK:cm=\EY%+ %+ :tc=regent:
+regent25|Adds Regent 25:\
+ :bl=^G:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:tc=regent20:
+regent40|Adds Regent 40:\
+ :sg#1:ug#1:\
+ :al=2*\EM:bl=^G:dl=2*\El:k0=^B1\r:k1=^B2\r:k2=^B3\r:\
+ :k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:l0=F1:l1=F2:\
+ :l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:me=\E0@:se=\E0@:so=\E0P:\
+ :ue=\E0@:us=\E0`:tc=regent25:
+regent40+|Adds Regent 40+:\
+ :is=\EB:tc=regent40:
+regent60|regent200|Adds Regent 60:\
+ :dc=\EE:ei=\EF:im=\EF:is=\EV\EB:kD=\EE:kI=\EF:kM=\EF:\
+ :se=\ER\E0@\EV:so=\ER\E0P\EV:tc=regent40+:
+# From: <[email protected]> Thu Jul 9 09:27:33 1981
+# (viewpoint: added :kr:, function key, and :dl: capabilities -- esr)
+viewpoint|addsviewpoint|adds viewpoint:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cd=16.1*\Ek:ce=16\EK:cl=^L:cm=\EY%+ %+ :cr=^M:\
+ :dl=\El:do=^J:is=\017\E0`:k0=^B1:k2=^B2:k3=^B!:k4=^B":\
+ :k5=^B#:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:ll=^A:me=^O:nd=^F:\
+ :se=^O:sf=^J:so=^N:ue=^O:up=^Z:us=^N:ve=\017\E0`:\
+ :vs=\017\E0P:
+# Some viewpoints have bad ROMs that foo up on ^O
+screwpoint|adds viewpoint with ^O bug:\
+ :se@:so@:ue@:us@:vs@:tc=viewpoint:
+
+# From: Jay S. Rouman <[email protected]> 5 Jul 92
+# The :vi:/:ve:/:sa:/:me: strings were added by ESR from specs.
+# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
+# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
+# invis=01000100 and %c is the logical or of desired attributes.
+# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
+#
+# Update by TD - 2004:
+# Adapted from
+# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
+#
+# COMMANDS ASCII CODE
+#
+# Address, Absolute ESC,=,row,column
+# Beep BEL
+# Aux Port Enable ESC,@
+# Aux Port Disable ESC,A
+# Backspace BS
+# Cursor back BS
+# Cursor down LF
+# Cursor forward FF
+# Cursor home RS
+# Cursor up VT
+# Cursor supress ETB
+# Cursor enable CAN
+# Erase to end of line ESC,T
+# Erase to end of page ESC,Y
+# Erase screen SUB
+# Keyboard lock SI
+# Keyboard unlock SO
+# Read current cursor position ESC,?
+# Set Attribute ESC,0,x (see below for values of x)
+# Tag bit reset ESC,(
+# Tag bit set ESC,)
+# Transparent Print on ESC,3
+# Transparent Print off ESC,4
+#
+#
+# ATTRIBUTES
+#
+# Normal @ 0100
+# Half Intensity A 0101
+# Blinking B 0102
+# Half Intensity Blinking C 0103
+# Reverse Video P 0120
+# Reverse Video Half Intensity Q 0121
+# Reverse Video Blinking R 0122
+# Reverse Video Half Intensity
+# Blinking S 0123
+# Underlined ` 0140
+# Underlined Half Intensity a 0141
+# Underlined Blinking b 0142
+# Underlined Half Intensity
+# Blinking c 0143
+# Video suppress D 0104
+vp3a+|viewpoint3a+|adds viewpoint 3a+:\
+ :am:bw:\
+ :co#80:it#8:li#24:\
+ :cd=80\EY:ce=\ET:cl=80\E*:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\
+ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mb=\E0B\E):me=\E(:\
+ :mh=\E0A\E):mk=\E0D\E):mr=\E0P\E):nd=^L:nw=^M^J:se=\E(:\
+ :sf=^J:so=\E0Q\E):ta=^I:up=^K:us=\E0`\E):ve=^X:vi=^W:
+vp60|viewpoint60|addsvp60|adds viewpoint60:\
+ :tc=regent40:
+#
+# adds viewpoint 90 - from cornell
+# Note: emacs sends ei occasionally to insure the terminal is out of
+# insert mode. This unfortunately puts the viewpoint90 IN insert
+# mode. A hack to get around this is :ic=\EF\s\EF^U:. (Also,
+# - :ei=:im=: must be present in the termcap translation.)
+# - :xs: indicates glitch that attributes stick to location
+# - :ms: means it's safe to move in standout mode
+# - :cl=\EG\Ek:: clears screen and visual attributes without affecting
+# the status line
+# Function key and label capabilities merged in from SCO.
+vp90|viewpoint90|adds viewpoint 90:\
+ :bs:bw:ms:xs:\
+ :co#80:li#24:\
+ :cd=\Ek:ce=\EK:cl=\EG\Ek:cm=\EY%+ %+ :dc=\EE:dl=\El:do=^J:\
+ :ei=:ho=\EY\040\040:ic=\EF \EF\025:im=:k0=^B1\r:k1=^B2\r:\
+ :k2=^B3\r:k3=^B4\r:k4=^B5\r:k5=^B6\r:k6=^B7\r:k7=^B8\r:\
+ :k8=^B9\r:k9=^B\072\r:k;=^B;\r:kb=^H:kd=^J:kh=^A:kl=^U:\
+ :kr=^F:ku=^Z:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:\
+ :l8=F9:l9=F10:la=F11:le=^H:ll=^A:me=\ER\E0@\EV:nd=^F:\
+ :se=\ER\E0@\EV:sf=^J:so=\ER\E0Q\EV:ta=^I:ue=\ER\E0@\EV:\
+ :up=^Z:us=\ER\E0`\EV:
+# Note: if return acts weird on a980, check internal switch #2
+# on the top chip on the CONTROL pc board.
+adds980|a980|adds consul 980:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=13\E\016:bl=^G:cl=\014\013@:cm=\013%+@\E\005%2:cr=^M:\
+ :dl=13\E\017:do=^J:k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:\
+ :k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:le=^H:me=^O:nd=\E^E01:\
+ :se=^O:sf=^J:so=^Y^^^N:
+
+#### C. Itoh Electronics
+#
+# As of 1995 these people no longer make terminals (they're still in the
+# printer business). Their terminals were all clones of the DEC VT series.
+# They're located in Orange County, CA.
+#
+
+# CIT 80 - vt-52 emulator, the termcap has been modified to remove
+# the delay times and do an auto tab set rather than the indirect
+# file used in vt100.
+cit80|cit-80|citoh 80:\
+ :am:bs:\
+ :co#80:li#24:\
+ :cd=\EJ:ce=\EK:cl=\E[H\EJ:cm=\E[%i%2;%2H:cr=^M:do=\E[B:\
+ :ff=^L:is=\E>:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=^H:nd=\E[C:sf=^J:up=\E[A:
+# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
+# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
+cit101|citc|C.itoh fast vt100:\
+ :am:bs:xn:\
+ :co#80:li#24:\
+ :RA=\E[?7l:SA=\E[?7h:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
+ :ic=\E[@:im=:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g:\
+ :kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
+ :ku=\EOA:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:ue=\E[m:\
+ :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[V\E8:vs=\E7\E[U:
+# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
+# The following termcap entry was created from the Callan cd100 entry. The
+# last two lines (with the capabilities in caps) are used by RM-cobol to allow
+# full selection of combinations of reverse video, underline, and blink.
+# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
+# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
+# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
+cit101e|C. Itoh CIT-101e:\
+ :am:bs:mi:ms:pt:\
+ :co#80:it#8:li#24:\
+ :ac=:ae=^O:al=\E[L:as=^N:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%2;%2H:cs=\E[%i%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ei=\E[4l:if=/usr/share/tabset/vt100:im=\E[4h:k0=\EOT:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOm:k6=\EOl:k7=\EOM:\
+ :k8=\EOn:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:\
+ :le=\E[D:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:so=\E[7m:sr=\EM:\
+ :ue=\E[m:up=\E[A:us=\E[4m:ve=:vs=\E[?1l\E[?4l\E[?7h:
+# From: David S. Lawyer, June 1997:
+# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
+# Terminals in Irvine, CA. It was part of CITOH Electronics. In the
+# late 1980's CIT Terminals went out of business.
+# There is no need to use the initialization string is=... (by invoking
+# tset or setterm etc.) provided that the terminal has been manually set
+# up (and the setup saved with ^S) to be compatible with this termcap. To be
+# compatible it should be in ANSI mode (not VT52). A set-up that
+# works is to set all the manually setable stuff to factory defaults
+# by pressing ^D in set-up mode. Then increse the brighness with the
+# up-arrow key since the factory default will likely be dim on an old
+# terminal. Then change any options you want (provided that they are
+# compatible with the termcap). For my terminal I set: Screen
+# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
+# on. I also set up mine for parity (but you may not need it). Then
+# save the setup with ^S.
+# (cit101e-rv: added empty :te: to suppress a tic warning. --esr)
+cit101e-rv|Citoh CIT-101e (sets reverse video):\
+ :am:eo:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:ic=\E[@:\
+ :im=\E[4h:\
+ :is=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=\177:kd=\E[B:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:nl=\EM:nw=\EE:r1=\Ec\E[?7h\E[>5g:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:te=:\
+ :ti=\E[>5g\E[?7h\E[?5h:u6=\E[%i%d;%dR:u7=\E[6n:\
+ :u8=\E[?6c:u9=\E[c:ue=\E[m:up=\E[A:us=\E[4m:\
+ :vb=200\E[?5l\E[?5h:ve=\E[0;3;4v:vi=\E[1v:vs=\E[3;5v:
+cit101e-n|CIT-101e w/o am:\
+ :am@:\
+ :kb=^H:kd=^J:kl=^H:vs=\E[?1l\E[?4l\E[?7l:tc=cit101e:
+cit101e-132|CIT-101e with 132 cols:\
+ :co#132:\
+ :kb=^H:kd=^J:kl=^H:tc=cit101e:
+cit101e-n132|CIT-101e with 132 cols w/o am:\
+ :am@:\
+ :co#132:\
+ :kb=^H:kd=^J:kl=^H:vs=\E[?1l\E[?4l\E[?7l:tc=cit101e:
+# CIE Terminals CIT-500 from BRL
+# The following SET-UP modes are assumed for normal operation:
+# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
+# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
+# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements.
+# Hardware tabs are assumed to be set every 8 columns; they can be set up
+# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
+# "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (cit500: I added <rmam>/<smam> based on the init string -- esr)
+cit500|CIE Terminals CIT-500:\
+ :bs:mi:ms:pt:xo:\
+ :co#80:it#8:kn#10:li#64:vt#3:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:\
+ :RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:ac=:ae=^O:al=\E[L:as=^N:\
+ :bl=^G:bt=\E[Z:cd=\EJ:ce=\EK:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :ei=\E[4l:ho=\E[H:im=\E[4h:is=\E<\E)0:k0=\EOP:k1=\EOQ:\
+ :k2=\EOR:k3=\EOS:k4=\EOU:k5=\EOV:k6=\EOW:k7=\EOX:k8=\EOY:\
+ :k9=\EOZ:kA=\E[L:kB=\E[Z:kD=\E[P:kE=\EK:kI=\E[4h:kL=\E[M:\
+ :kM=\E[4l:kS=\EJ:kb=^H:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=PF1:l1=PF2:l2=PF3:\
+ :l3=PF4:l4=F15:l5=F16:l6=F17:l7=F18:l8=F19:l9=F20:le=^H:\
+ :ll=\E[64H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
+ :nw=\EE:\
+ :r1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>:\
+ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\E[m:up=\EM:us=\E[4m:
+
+# C. Itoh printers begin here
+citoh|ci8510|8510|c.itoh 8510a:\
+ :co#80:it#8:\
+ :is=\E(009,017,025,033,041,049,057,065,073.:le@:md=\E!:\
+ :me=\E"\EY:rp=\ER%r%3%.:sr=\Er:ue=\EY:us=\EX:tc=lpr:
+citoh-pica|citoh in pica:\
+ :i1=\EN:tc=citoh:
+citoh-elite|citoh in elite:\
+ :co#96:\
+ :i1=\EE:\
+ :is=\E(009,017,025,033,041,049,057,065,073,081,089.:\
+ :tc=citoh:
+citoh-comp|citoh in compressed:\
+ :co#136:\
+ :i1=\EQ:\
+ :is=\E(009,017,025,033,041,049,057,065,073,081,089,097,105,113,121,129.:\
+ :tc=citoh:
+# citoh has infinite cols because we don't want lp ever inserting \n\t**.
+citoh-prop|citoh-ps|ips|citoh in proportional spacing mode:\
+ :co#32767:\
+ :i1=\EP:tc=citoh:
+citoh-6lpi|citoh in 6 lines per inch mode:\
+ :i2=\EA:tc=citoh:
+citoh-8lpi|citoh in 8 lines per inch mode:\
+ :li#88:\
+ :i2=\EB:tc=citoh:
+
+#### Control Data (cdc)
+#
+
+cdc456|cdc 456 terminal:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%+ %+ :cr=^M:dl=\EJ:\
+ :do=^J:ho=^Y:le=^H:nd=^L:sf=^J:up=^Z:
+
+# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
+cdc721|CDC Viking:\
+ :am:bs:\
+ :co#80:li#24:\
+ :ce=^K:cl=^L:cm=\002%r%+ %+ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^I:\
+ :ku=^W:nd=^X:up=^W:
+cdc721ll|CDC Vikingll:\
+ :am:bs:\
+ :co#132:li#24:\
+ :ce=^K:cl=^L:cm=\002%r%+ %+ :ho=^Y:kd=^J:kh=^Y:kl=^H:kr=^I:\
+ :ku=^W:nd=^X:up=^W:
+# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
+cdc752|CDC 752:\
+ :am:bs:bw:xs:\
+ :co#80:li#24:\
+ :bl=^G:ce=^V:cl=\030\E1\040\040:cm=\E1%r%+ %+ :cr=^M:\
+ :do=^J:ho=\E1\040\040:le=^H:ll=^Y:nd=^U:\
+ :r1=\E1 \030\002\003\017:sf=^J:up=^Z:
+# CDC 756
+# The following switch/key settings are assumed for normal operation:
+# 96 chars SCROLL FULL duplex not BLOCK
+# Other switches may be set according to communication requirements.
+# Insert/delete-character cannot be used, as the whole display is affected.
+# "so" & "se" are commented out until jove handles "sg" correctly.
+cdc756|CDC 756:\
+ :am:bs:bw:\
+ :co#80:kn#10:li#24:\
+ :al=6*\EL:bl=^G:cd=^X:ce=^V:cl=^Y^X:cm=\E1%r%+ %+ :cr=^M:\
+ :dl=6*\EJ:do=^J:ho=^Y:k0=\EA:k1=\EB:k2=\EC:k3=\ED:k4=\EE:\
+ :k5=\EF:k6=\EG:k7=\EH:k8=\Ea:k9=\Eb:kA=\EL:kD=\EI:kE=^V:\
+ :kI=\EK:kL=\EL:kS=^X:kT=^O:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^U:\
+ :ku=^Z:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:l5=F6:l6=F7:l7=F8:l8=F9:\
+ :l9=F10:le=^H:ll=^Y^Z:nd=^U:r1=\031\030\002\003\017:sf=^J:\
+ :up=^Z:
+#
+# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
+#
+# Part of the long initialization string defines the "DOWN" key to the left
+# of the tab key to send an ESC. The real ESC key is positioned way out
+# in right field.
+#
+# The termcap won't work in 132 column mode due to the way it it moves the
+# cursor. Termcap doesn't have the capability (as far as I could tell) to
+# handle the 721 in 132 column mode.
+#
+# (cdc721: changed :ri: to :sr: -- esr)
+cdc721-esc|Control Data 721:\
+ :am:bs:bw:ms:pt:xo:\
+ :co#80:it#8:kn#10:li#30:\
+ :al=^^R:bl=^G:bt=^^^K:cd=^^P:ce=^K:cl=^L:cm=\002%r%+ %+ :\
+ :ct=^^^RY:dc=^^N:dl=^^Q:do=^Z:ei=:ho=^Y:ic=^^O:im=:\
+ :is=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\136\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o:\
+ :k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:k6=^^w:k7=^^x:\
+ :k8=^^y:k9=^^z:kb=^H:kd=^Z:ke=^^^Rl:kh=^Y:kl=^H:kr=^X:\
+ :ks=^^^Rk:ku=^W:le=^H:ll=^B =:mb=^N:\
+ :me=\017\025\035\036E\036\022\\:mh=^\:mk=^^^R[:mr=^^D:\
+ :nd=^X:se=^^E:sf=\036W =\036U:so=^^D:sr=\036W =\036V:\
+ :st=^^^RW:ue=^]:up=^W:us=^\:
+
+#### Getronics
+#
+# Getronics is a Dutch electronics company that at one time was called
+# `Geveke' and made async terminals; but (according to the company itself!)
+# they've lost all their documentation on the command set. The hardware
+# documentation suggests the terminals were actually manufactured by a
+# Taiwanese electronics company named Cal-Comp. There are known
+# to have been at least two models, the 33 and the 50.
+#
+
+# The 50 seems to be a top end vt220 clone, with the addition of a higher
+# screen resolution, a larger screen, at least 1 page of memory above and
+# below the screen, apparently pages of memory right and left of the screen
+# which can be panned, and about 75 function keys (15 function keys x normal,
+# shift, control, func A, func B). It also has more setup possibilities than
+# the vt220. The monitor case is dated November 1978 and the keyboard case is
+# May 1982.
+#
+# The vt100 emulation works as is. The entry below describes the rather
+# non-conformant (but more featureful) ANSI mode.
+#
+# From: Stephen Peterson <[email protected]>, 27 May 1995
+# (acsc removed to fit entry within 1023 bytes)
+visa50|geveke visa 50 terminal in ansi 80 character mode:\
+ :bw:mi:ms:\
+ :co#80:li#25:\
+ :AL=\E[%dL:DC=\E[%dX:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :K1=\E[f:K2=\EOP:K3=\EOQ:K4=\EOR:K5=\EOS:LE=\E[%dD:\
+ :RA=\E[?7l:RI=\E[%dC:SA=\E?7h:UP=\E[%dA:ae=\E[3l:al=\E[L:\
+ :as=\E3h:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%dG:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:cv=\E[%i%dd:dc=\E[X:dl=\E[M:do=\E[B:ei=\E[4l:\
+ :ho=\E[H:ic=\E[@:im=\E[4h:\
+ :is=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h:k0=\E010:\
+ :k1=\E001:k2=\E002:k3=\E003:k4=\E004:k5=\E005:k6=\E006:\
+ :k7=\E007:k8=\E008:k9=\E009:k;=\E011:kD=\177:kL=\EOS:kb=^H:\
+ :kd=\E[A:ke=\E>:kh=\E[f:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:\
+ :l2=A delete char:l3=A insert line:l4=A delete line:\
+ :l5=A clear:l6=A ce of/cf gn:l7=A print:l8=A on-line:\
+ :l9=A funcl0=A send:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[0;2m:\
+ :mh=\E[2m:mk=\E[8m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0;2m:\
+ :sf=^J:so=\E[2;7m:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:\
+ :vb=\E[?5h\E[?5l:
+
+#### Human Designed Systems (Concept)
+#
+# Human Designed Systems
+# 400 Fehley Drive
+# King of Prussia, PA 19406
+# Vox: (610)-277-8300
+# Fax: (610)-275-5739
+# Net: [email protected]
+#
+# John Martin <[email protected]> is their termcap expert. They're mostly out of
+# the character-terminal business now (1995) and making X terminals. In
+# particular, the whole `Concept' line described here was discontinued long
+# ago.
+#
+
+# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
+# Extensive changes to c108 by arpavax:eric Feb 1982
+# Some unknown person at SCO then translated it to terminfo.
+#
+# There seem to be a number of different versions of the C108 PROMS
+# (with bug fixes in its Z-80 program).
+#
+# The first one that we had would lock out the keyboard of you
+# sent lots of short lines (like /usr/dict/words) at 9600 baud.
+# Try that on your C108 and see if it sends a ^S when you type it.
+# If so, you have an old version of the PROMs.
+#
+# You should configure the C108 to send ^S/^Q before running this.
+# It is much faster (at 9600 baud) than the c100 because the delays
+# are not fixed.
+# new status line display entries for c108-8p:
+# :i3: - init str #3 - setup term for status display -
+# set programmer mode, select window 2, define window at last
+# line of memory, set bkgnd stat mesg there, select window 0.
+#
+# :ts: - to status line - select window 2, home cursor, erase to
+# end-of-window, 1/2 bright on, goto(line#0, col#?)
+#
+# :fs: - from status line - 1/2 bright off, select window 0
+#
+# :ds: - disable status display - set bkgnd status mesg with
+# illegal window #
+#
+# There are probably more function keys that should be added but
+# I don't know what they are.
+#
+# No delays needed on c108 because of ^S/^Q handshaking
+#
+c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages:\
+ :i2=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n:\
+ :te=\Ev \001\177p\Ep\r\n:tc=c108-4p:
+c108-4p|concept108-4p|concept 108 w/4 pages:\
+ :bs:es:hs:xo:\
+ :pb@:\
+ :ac=jEkTl\\mMqLxU:ae=\Ej\040:as=\Ej!:cr=^M:dc=16*\E 1:\
+ :ds=\E ;\177:fs=\Ee\E z\040:i1=\EK\E!\E F:\
+ :i2=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n:\
+ :sf=^J:te=\Ev \001 p\Ep\r\n:ti=\EU\Ev 8p\Ep\r\E\025:\
+ :ve=\Ew:vs=\EW:tc=c100:
+c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video:\
+ :te=\Ev \002 p\Ep\r\n:ti=\EU\Ev 8p\Ep\r:\
+ :tc=c108-rv-4p:
+c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video:\
+ :i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:tc=c108-4p:
+c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode:\
+ :co#132:\
+ :i1=\E F\E":te=\Ev ^A0\001D\Ep\r\n:\
+ :ti=\EU\Ev 8\001D\Ep\r:tc=c108-8p:
+
+# Concept 100:
+# These have only window relative cursor addressing, not screen
+# relative. To get it to work right here, smcup/rmcup (which
+# were invented for the concept) lock you into a one page
+# window for screen style programs.
+#
+# To get out of the one page window, we use a clever trick:
+# we set the window size to zero ("\Ev " in rmcup) which the
+# terminal recognizes as an error and resets the window to all
+# of memory.
+#
+# This trick works on c100 but does not on c108, sigh.
+#
+# Some tty drivers use cr3 for concept, others use nl3, hence
+# the delays on cr and ind below. This padding is only needed at
+# 9600 baud and up. One or the other is commented out depending on
+# local conventions.
+#
+# 2 ms padding on :te: isn't always enough. 6 works fine. Maybe
+# less than 6 but more than 2 will work.
+#
+# Note: can't use function keys f7-f10 because they are
+# indistinguishable from arrow keys (!), also, del char and
+# clear eol use xon/xoff so they probably won't work very well.
+#
+# Also note that we don't define insrt/del char/delline/eop/send
+# because they don't transmit unless we reset them - I figured
+# it was a bad idea to clobber their definitions.
+#
+# The <mc5> sequence changes the escape character to ^^ so that
+# escapes will be passed through to the printer. Only trouble
+# is that ^^ won't be - ^^ was chosen to be unlikely.
+# Unfortunately, if you're sending raster bits through to be
+# plotted, any character you choose will be likely, so we lose.
+#
+# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
+# cannot be # in is2 because it will hang a c100 with no printer
+# if sent twice.
+c100|concept100|concept|c104|c100-4p|hds concept 100:\
+ :am:bs:eo:mi:ul:xn:\
+ :co#80:li#24:pb#9600:vt#8:\
+ :al=3*\E\022:bl=^G:cd=16*\E\005:ce=16\E\025:\
+ :cl=2*\E?\E\005:cm=\Ea%+ %+ :cr=\r:dc=16*\E\021:\
+ :dl=3*\E\002:do=^J:ei=\E\040\040:i1=\EK:i2=\Ev \Ep\n:\
+ :im=\E^P:ip=16*:\
+ :is=\EU\Ef\E7\E5\E8\El\ENH\E\200\Eo&\200\Eo'\E\Eo!\200\E\007!\E\010A@ \E4#\072"\E\072a\E4#;"\E\072b\E4#<"\E\072c:\
+ :k1=\E5:k2=\E6:k3=\E7:k4=\E8:k5=\E9:k6=\E\072a:k7=\E\072b:\
+ :k8=\E\072c:kA=\E^R:kB=\E':kD=\E^Q:kE=\E^S:kF=\E[:kI=\E^P:\
+ :kL=\E^B:kM=\E\200:kN=\E-:kP=\E.:kR=\E\\:kS=\E^C:kT=\E]:\
+ :kb=^H:kd=\E<:ke=\Ex:kh=\E?:kl=\E>:kr=\E=:ks=\EX:kt=\E_:\
+ :ku=\E;:le=^H:mb=\EC:me=\EN@:mh=\EE:mk=\EH:mp=\EI:mr=\ED:\
+ :nd=\E=:pf=\036o \E\EQ!\EYP\027:\
+ :po=\EQ"\EY(\027\EYD\Eo \036:rp=.2*\Er%.%+ :se=\Ed:\
+ :sf=^J:so=\ED:ta=8\011:te=\Ev \Ep\r\n:\
+ :ti=16\EU\Ev 8p\Ep\r\E\025:ue=\Eg:up=\E;:us=\EG:\
+ :vb=\Ek\EK:
+c100-rv|c100-rv-4p|concept100-rv|c100 rev video:\
+ :i1=\Ek:se=\Ee:so=\EE:vb=\EK\Ek:ve@:vs@:tc=c100:
+oc100|oconcept|c100-1p|old 1 page concept 100:\
+ :in:\
+ :i3@:tc=c100:
+
+# From: Walter Skorski <[email protected]>, 16-oct-1996.
+# Lots of notes, originally inline, but ncurses doesn't grok that.
+#
+# am: not available in power on mode, but turned on with \E[=107;207h in
+# is2=. Also, \E=124l in is2= could have been used to prevent needing
+# to specify xenl:, but that would have rendered the last space on the
+# last line useless.
+# bw: Not available in power on mode, but turned on with \E[=107;207h in
+# is2=.
+# clear: Could be done with \E[2J alone, except that vi (and probably most
+# other programs) assume that this also homes the cursor.
+# dsl: Go to window 2, go to the beginning of the line, use a line feed to
+# scroll the window, and go back to window 1.
+# is2: the string may cause a warning to be issued by tic that it
+# found a very long line and that it suspects that a comma is missing
+# somewhere. This warning can be ignored (unless it comes up more than
+# once). The initialization string contains the following commands:
+#
+# [Setup mode items changed from factory defaults:]
+# \E)0 set alternate character set to
+# graphics
+# ^O set character set to default
+# [In case it wasn't]
+# \E[m turn off all attributes
+# [In case they weren't off]
+# \E[=107; cursor wrap and
+# 207h character wrap on
+# \E[90;3u set Fkey definitions to "transmit"
+# defaults
+# \E[92;3u set cursor key definitions to
+# "transmit" defaults
+# \E[43;1u set shift F13 to transmit...
+# \177\E$P\177
+# \E[44;1u set shift F14 to transmit...
+# \177\E$Q\177
+# \E[45;1u set shift F15 to transmit...
+# \177\E$R\177
+# \E[46;1u set shift F16 to transmit...
+# \177\E$S\177
+# \E[200;1u set shift up to transmit...
+# \177\E$A\177
+# \E[201;1u set shift down to transmit...
+# \177\E$B\177
+# \E[202;1u set shift right to transmit...
+# \177\E$C\177
+# \E[203;1u set shift left to transmit...
+# \177\E$D\177
+# \E[204;1u set shift home to transmit...
+# \177\E$H\177
+# \E[212;1u set backtab to transmit...
+# \177\E$I\177
+# \E[213;1u set shift backspace to transmit...
+# \177\E$^H\177
+# \E[214;1u set shift del to transmit...
+# "\E$\177"
+# [Necessary items not mentioned in setup mode:]
+# \E[2!w move to window 2
+# \E[25;25w define window as line 25 of memory
+# \E[!w move to window 1
+# \E[2*w show current line of window 2 as
+# status line
+# \E[2+x set meta key to use high bit
+# \E[;3+} move underline to bottom of character
+#
+# All Fkeys are set to their default transmit definitions with \E[90;3u
+# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
+# setting MUST be redefined or deactivated, because the default is
+# contained in almost all of this terminal's Fkey strings! If for some
+# reason "quit" cannot be altered, the Fkeys can, but it would be
+# necessary to change ^| to ^] in all of these definitions, and add
+# \E[2;029!t to is2.
+# lines: is set to 24 because this terminal refuses to treat the 25th
+# line normally.
+# ll: Not available in power on mode, but turned on with \E[=107;207h in
+# is2=.
+# lm: Pointless, given that this definition locks a single screen of
+# memory into view, but what the hey...
+# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
+# other attributes alone), but some programs expect this to turn off
+# everything.
+# rmul: Could use \E[4!{ to turn off only underline (leaving any other
+# attributes alone), but some programs expect this to turn off
+# everything.
+# sgr: Attributes are set on this terminal with the string \E[ followed by
+# a list of attribute code numbers (in decimal, separated by
+# semicolons), followed by the character m. The attribute code
+# numbers are:
+# 1 for bold;
+# 2 for dim (which is ignored in power on mode);
+# 4 for underline;
+# 5 for blinking;
+# 7 for inverse;
+# 8 for not displayable; and
+# =99 for protected (except that there are strange side
+# effects to protected characters which make them inadvisable).
+# The mapping of terminfo parameters to attributes is as follows:
+# %p1 (standout) = bold and inverse together;
+# %p2 (underline) = underline;
+# %p3 (reverse) = inverse;
+# %p4 (blink) = blinking;
+# %p5 (dim) is ignored;
+# %p6 (bold) = bold;
+# %p7 (invisible) = not displayable;
+# %p8 (protected) is ignored; and
+# %p9 (alt char set) = alt char set.
+# The code to do this is:
+# \E[0 OUTPUT \E[0
+# %?%p1%p6%O IF (standout; bold) OR
+# %t;1 THEN OUTPUT ;1
+# %; ENDIF
+# %?%p2 IF underline
+# %t;4 THEN OUTPUT ;4
+# %; ENDIF
+# %?%p4 IF blink
+# %t;5 THEN OUTPUT ;5
+# %; ENDIF
+# %?%p1%p3%O IF (standout; reverse) OR
+# %t;7 THEN OUTPUT ;7
+# %; ENDIF
+# %?%p7 IF invisible
+# %t;8 THEN OUTPUT ;8
+# %; ENDIF
+# m OUTPUT m
+# %?%p9 IF altcharset
+# %t^N THEN OUTPUT ^N
+# %e^O ELSE OUTPUT ^O
+# %; ENDIF
+# sgr0: Everything is turned off (including alternate character set), since
+# there is no way of knowing what it is that the program wants turned
+# off.
+# smul: The "underline" attribute is reconfigurable to an overline or
+# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
+# bottom of the character cell. This was done to allow for more readable
+# underlined characters, and to be able to distinguish between an
+# underlined space, an underscore, and an underlined underscore.
+# xenl: Terminal can be configured to not need this, but this "glitch"
+# behavior is actually preferable with autowrap terminals.
+#
+# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
+# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
+# string modifies the 'O' in kf43 to kf46 to a '$'.
+#
+# kcbt was originally ^I but redefined in is2=.
+# kHOM was \E[H originally but redefined in is2=, as were a number of
+# other keys.
+# kDC was originally \177 but redefined in is2=.
+#
+# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
+# tsl: Go to window 2, then do an hpa=.
+#
+#------- flash=\E[8;3!}^G\E[3;3!}
+#------- flash=\E[?5h$<100>\E[?5l
+# There are two ways to flash the screen, both of which have their drawbacks.
+# The first is to set the bell mode to video, transmit a bell character, and
+# set the bell mode back - but to what? There is no way of knowing what the
+# user's old bell setting was before we messed with it. Worse, the command to
+# set the bell mode also sets the key click volume, and there is no way to say
+# "leave that alone", or to know what it's set to, either.
+# The second way to do a flash is to set the screen to inverse video, pad for a
+# tenth of a second, and set it back - but like before, there's no way to know
+# that the screen wasn't ALREADY in inverse video, or that the user may prefer
+# it that way. The point is moot anyway, since vi (and probably other
+# programs) assume that by defining flash=, you want the computer to use it
+# INSTEAD of bel=, rather than as a secondary type of signal.
+#
+#------- cvvis=\E[+{
+# The is the power on setting, which is also as visible as the cursor
+# gets.
+#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
+# Windowing is possible, but not defined here because it is also used to
+# emulate status line functions. Allowing a program to set a window could
+# clobber the status line or render it unusable. There is additional memory,
+# but screen scroll functions are destructive and do not make use of it.
+#
+#------- dim= Not available in power on mode.
+# You have a choice of defining low intensity characters as "half bright" and
+# high intensity as "normal", or defining low as "normal" and high as "bold".
+# No matter which you choose, only one of either "half bright" or "bold" is
+# available at any time, so taking the time to override the default is
+# pointless.
+#
+#------- prot=\E[=0;99m
+# Not defined, because it appears to have some strange side effects.
+#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
+# Available, but making them available to programs is inadvisable.
+# The code to do this is:
+# %?%p1%{24}%< IF ((key; 24) <;
+# %p1%{30}%> ((key; 30) >;
+# %p1%{54}%< (key; 54) <
+# %A ) AND
+# %O ) OR
+# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
+# %t\E[ THEN OUTPUT \E[
+# %p1%d OUTPUT (key) as decimal
+# [next line applies to pfx only]
+# ;1 OUTPUT ;1
+# u OUTPUT u
+# \177 OUTPUT \177
+# %p2%s OUTPUT (string) as string
+# \177 OUTPUT \177
+# [DEL chosen as delimiter, but could be any character]
+# [implied: ELSE do nothing]
+# %; ENDIF
+#
+#------- rs2=
+# Not defined since anything it might do could be done faster and easier with
+# either Meta-Shift-Reset or the main power switch.
+#
+#------- smkx=\E[1!z
+#------- rmkx=\E[!z
+# These sequences apply to the cursor and setup keys only, not to the
+# numeric keypad. But it doesn't matter anyway, since making these
+# available to programs is inadvisable.
+# For the key definitions below, all sequences beginning with \E$ are
+# custom and programmed into the terminal via is2. \E$ also has no
+# meaning to any other terminal.
+#
+#------- cmdch=\E[;%p1%d!t
+# Available, but making it available to programs is inadvisable.
+#------- smxon=\E[1*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will send XON/XOFF on buffer overflow.
+#------- rmxon=\E[*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will not notify on buffer overflow.
+#------- smm=\E[2+x
+#------- rmm=\E[+x
+# Available, but making them available to programs is inadvisable.
+#
+# Printing:
+# It's not made clear in the manuals, but based on other ansi/vt type
+# terminals, it's a good guess that this terminal is capable of both
+# "transparent print" (which doesn't copy data to the screen, and
+# therefore needs mc5i: specified to say so) and "auxilliary print"
+# (which does duplicate printed data on the screen, in which case mc4=
+# and mc5= should use the \E[?4i and \E[?5i strings instead).
+
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+# (some function-key capabilities suppressed to fit entry within 1023 bytes)
+hds200|Human Designed Systems HDS200:\
+ :am:bw:es:hs:km:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:lm#0:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\
+ :bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ds=\E[2!w\r\n\E[!w:ei=\E[4l:fs=\E[!w:ho=\E[H:im=\E[4h:\
+ :is=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}:\
+ :kD=\177:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=\E[D:ll=\E[H\E[A:mb=\E[0;5m:\
+ :md=\E[0;1m:me=\E[0m:mr=\E[0;7m:nd=\E[C:nw=\E[E:rc=\E8:\
+ :sc=\E7:se=\E[m\017:sf=\ED:so=\E[0;1;7m:sr=\EM:st=\EH:\
+ :ta=^I:ts=\E[2!w\E[%i%dG:ue=\E[m\017:up=\E[A:us=\E[0;4m:\
+ :ve=\E[+{:vi=\E[6+{:
+
+# :ta: through :ce: included to specify padding needed in raw mode.
+# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
+avt-ns|concept avt no status line:\
+ :am:bs:eo:mi:ul:xn:xo:\
+ :co#80:it#8:li#24:lm#192:\
+ :AL=4*\E[%dL:DL=4*\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:ac=:ae=1\016:al=4\E[L:as=1\017:bl=^G:\
+ :bt=\E[Z:cd=96\E[J:ce=6\E[K:ch=\E[%+^AG:cl=38\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:\
+ :cv=\E[%+^Ad:dc=\E[P:dl=4\E[M:do=^J:ei=\E[4l:ho=\E[H:\
+ :i1=\E[=103l\E[=205l:ic=\E[@:im=\E[4h:ip=4:\
+ :is=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\0720\07232!r\E[0*w\E[w\E2\r\n\E[2;27!t:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kA=\E^C\r:kD=\E^B\r:\
+ :kI=\E^A\r:kS=\E^D\r:kb=^H:kd=\E[B:ke=\E[!z\E[0;2u:\
+ :kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[1!z\E[0;3u:ku=\E[A:le=^H:\
+ :ll=\E[24H:mb=\E[5m:md=\E[1m:me=\E[m:mh=\E[1!{:mk=\E[8m:\
+ :mp=\E[99m:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:\
+ :rc=\E8:sc=\E7:se=\E[7!{:sf=8\n:so=\E[7m:sr=4\EM:st=\EH:\
+ :ta=4\011:te=\E[w\E2\r\n:ti=\E[=4l\E[1;24w\E2\r:\
+ :ue=\E[4!{:up=\E[A:us=\E[4m:ve=\E[=119l:vs=\E[=119h:
+avt-rv-ns|concept avt in reverse video mode/no status line:\
+ :i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt-ns:
+avt-w-ns|concept avt in 132 column mode/no status line:\
+ :i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt-ns:
+avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video:\
+ :i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
+ :vb=\E[=205l\E[=205h:tc=avt-ns:
+
+# Concept AVT with status line. We get the status line using the
+# "Background status line" feature of the terminal. We swipe the
+# first line of memory in window 2 for the status line, keeping
+# 191 lines of memory and 24 screen lines for regular use.
+# The first line is used instead of the last so that this works
+# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
+# assumes an 8 page AVT but lm isn't currently used anywhere.)
+#
+avt+s|concept avt status line changes:\
+ :es:hs:\
+ :lm#191:\
+ :ds=\E[0*w:fs=\E[1;1!w:\
+ :i2=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n:\
+ :te=\E[2w\E2\r\n:ti=\E[2;25w\E2\r:\
+ :ts=\E[2;1!w\E[;%dH\E[2K:
+avt|avt-s|concept-avt|avt w/80 columns:\
+ :tc=avt+s:tc=avt-ns:
+avt-rv|avt-rv-s|avt reverse video w/sl:\
+ :i1=\E[=103l\E[=205h:vb=\E[=205l\E[=205h:tc=avt+s:\
+ :tc=avt-ns:
+avt-w|avt-w-s|concept avt 132 cols+status:\
+ :i1=\E[=103h\E[=205l:ti=\E[H\E[1;24;1;132w:tc=avt+s:\
+ :tc=avt-ns:
+avt-w-rv|avt-w-rv-s|avt wide+status+rv:\
+ :i1=\E[=103h\E[=205h:ti=\E[H\E[1;24;1;132w:\
+ :vb=\E[=205l\E[=205h:tc=avt+s:tc=avt-ns:
+
+#### Contel Business Systems.
+#
+
+# Contel c300 and c320 terminals.
+contel300|contel320|c300|Contel Business Systems C-300 or C-320:\
+ :am:in:xo:\
+ :co#80:li#24:sg#1:\
+ :al=5.5*\EL:bl=^G:cd=5.5*\EJ:ce=5.5\EI:cl=\EK:\
+ :cm=\EX%+ \EY%+ :cr=^M:ct=\E3:dc=5.5*\EO:dl=5.5*\EM:do=^J:\
+ :ei=:ho=\EH:ic=\EN:im=:ip=5.5*:k0=\ERJ:k1=\ERA:k2=\ERB:\
+ :k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:k7=\ERG:k8=\ERH:k9=\ERI:\
+ :kb=^H:le=^H:ll=\EH\EA:me=\E!\200:nd=\EC:se=\E!\200:sf=^J:\
+ :so=\E!\r:st=\E1:up=\EA:vb=\020\002\020\003:
+# Contel c301 and c321 terminals.
+contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321:\
+ :ic@:ip@:se=20\E!\200:so=20\E!\r:vb@:tc=contel300:
+
+#### Data General (dg)
+#
+# According to James Carlson <[email protected]> writing in January 1995,
+# the terminals group at Data General was shut down in 1991; all these
+# terminals have thus been discontinued.
+#
+# DG terminals have function keys that respond to the SHIFT and CTRL keys,
+# e.g., SHIFT-F1 generates a different code from F1. To number the keys
+# sequentially, first the unmodified key codes are listed as F1 through F15.
+# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
+# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
+# F46 through F60. This is done in the private "includes" below whose names
+# start with "dgkeys+".
+#
+# DG terminals generally support 8 bit characters. For each of these terminals
+# two descriptions are supplied:
+# 1) A default description for 8 bits/character communications, which
+# uses the default DG international character set and keyboard codes.
+# 2) A description with suffix "-7b" for 7 bits/character communications.
+# This description must use the NON-DEFAULT native keyboard language.
+
+# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
+# Ctrl/Shift fdkeys (kf34-kf44).
+
+dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys:\
+ :%9=\233i:F1=\233011z:F2=\233012z:F3=\233013z:\
+ :F4=\233014z:F5=\233000z:F6=\233101z:F7=\233102z:\
+ :F8=\233103z:F9=\233104z:FA=\233105z:FB=\233106z:\
+ :FC=\233107z:FD=\233108z:FE=\233109z:FF=\233110z:\
+ :FG=\233111z:FH=\233112z:FI=\233113z:FJ=\233114z:\
+ :FK=\233100z:FL=\233201z:FM=\233202z:FN=\233203z:\
+ :FO=\233204z:FP=\233205z:FQ=\233206z:FR=\233207z:\
+ :FS=\233208z:FT=\233209z:FU=\233210z:FV=\233211z:\
+ :FW=\233212z:FX=\233213z:FY=\233214z:FZ=\233200z:\
+ :Fa=\233301z:Fb=\233302z:Fc=\233303z:Fd=\233304z:\
+ :Fe=\233305z:Ff=\233306z:Fg=\233307z:Fh=\233308z:\
+ :Fi=\233309z:Fj=\233310z:Fk=\233311z:Fl=\233312z:\
+ :Fm=\233313z:Fn=\233314z:Fo=\233300z:K1=\233020z:\
+ :K3=\233021z:K4=\233022z:K5=\233023z:k1=\233001z:\
+ :k2=\233002z:k3=\233003z:k4=\233004z:k5=\233005z:\
+ :k6=\233006z:k7=\233007z:k8=\233008z:k9=\233009z:\
+ :k;=\233010z:kC=\2332J:kE=\233K:kd=\233B:kh=\233H:\
+ :kl=\233D:kr=\233C:ku=\233A:
+
+dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys:\
+ :%9=\E[i:F1=\E[011z:F2=\E[012z:F3=\E[013z:F4=\E[014z:\
+ :F5=\E[000z:F6=\E[101z:F7=\E[102z:F8=\E[103z:F9=\E[104z:\
+ :FA=\E[105z:FB=\E[106z:FC=\E[107z:FD=\E[108z:FE=\E[109z:\
+ :FF=\E[110z:FG=\E[111z:FH=\E[112z:FI=\E[113z:FJ=\E[114z:\
+ :FK=\E[100z:FL=\E[201z:FM=\E[202z:FN=\E[203z:FO=\E[204z:\
+ :FP=\E[205z:FQ=\E[206z:FR=\E[207z:FS=\E[208z:FT=\E[209z:\
+ :FU=\E[210z:FV=\E[211z:FW=\E[212z:FX=\E[213z:FY=\E[214z:\
+ :FZ=\E[200z:Fa=\E[301z:Fb=\E[302z:Fc=\E[303z:Fd=\E[304z:\
+ :Fe=\E[305z:Ff=\E[306z:Fg=\E[307z:Fh=\E[308z:Fi=\E[309z:\
+ :Fj=\E[310z:Fk=\E[311z:Fl=\E[312z:Fm=\E[313z:Fn=\E[314z:\
+ :Fo=\E[300z:K1=\E[020z:K3=\E[021z:K4=\E[022z:K5=\E[023z:\
+ :k1=\E[001z:k2=\E[002z:k3=\E[003z:k4=\E[004z:k5=\E[005z:\
+ :k6=\E[006z:k7=\E[007z:k8=\E[008z:k9=\E[009z:k;=\E[010z:\
+ :kC=\E[2J:kE=\E[K:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:
+
+dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys:\
+ :F1=^^{:F2=^^a:F3=^^b:F4=^^c:F5=^^d:F6=^^e:F7=^^f:F8=^^g:\
+ :F9=^^h:FA=^^i:FB=^^j:FC=^^k:FD=^^1:FE=^^2:FF=^^3:FG=^^4:\
+ :FH=^^5:FI=^^6:FJ=^^7:FK=^^8:FL=^^9:FM=^^\072:FN=^^;:FO=^^!:\
+ :FP=^^":FQ=^^#:FR=^^$:FS=^^%%:FT=^^&:FU=^^':FV=^^(:FW=^^):\
+ :FX=^^*:FY=^^+:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:\
+ :k7=^^w:k8=^^x:k9=^^y:k;=^^z:kC=^L:kE=^K:kd=^Z:kh=^H:kl=^Y:\
+ :kr=^X:ku=^W:
+
+dgkeys+15|Private entry describing 15 DG mode special keys:\
+ :#2=^^^H:#4=^^^Y:%i=^^^X:F1=^^{:F2=^^|:F3=^^}:F4=^^~:F5=^^p:\
+ :F6=^^a:F7=^^b:F8=^^c:F9=^^d:FA=^^e:FB=^^f:FC=^^g:FD=^^h:\
+ :FE=^^i:FF=^^j:FG=^^k:FH=^^l:FI=^^m:FJ=^^n:FK=^^`:FL=^^1:\
+ :FM=^^2:FN=^^3:FO=^^4:FP=^^5:FQ=^^6:FR=^^7:FS=^^8:FT=^^9:\
+ :FU=^^\072:FV=^^;:FW=^^<:FX=^^=:FY=^^>:FZ=^^0:Fa=^^!:Fb=^^":\
+ :Fc=^^#:Fd=^^$:Fe=^^%%:Ff=^^&:Fg=^^':Fh=^^(:Fi=^^):Fj=^^*:\
+ :Fk=^^+:Fl=^^,:Fm=^^-:Fn=^^.:Fo=^^\040:K1=^^\\:K3=^^]:\
+ :K4=^^\136:K5=^^_:k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:\
+ :k7=^^w:k8=^^x:k9=^^y:k;=^^z:
+
+# Data General color terminals use the "Tektronix" color model. The total
+# number of colors varies with the terminal model, as does support for
+# attributes used in conjunction with color.
+
+# Removed u7, u8 definitions since they conflict with tack:
+# Preserve user-defined colors in at least some cases.
+# u7=^^Fh,
+# Default is ACM mode.
+# u8=^^F}20^^Fi^^F}21,
+#
+dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode:\
+ :ut:\
+ :Co#16:NC#53:pa#256:\
+ :Sb=\036B%+0:Sf=\036A%+0:op=\036Ad\036Bd:
+
+dg+fixed|Fixed color info for DG D430C terminals in DG mode:\
+ :tc=dgunix+fixed:
+
+# Video attributes are coordinated using static variables set by "sgr", then
+# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
+# (D=dim, U=underline, B=blink, R=reverse.)
+dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode:\
+ :ut:\
+ :Co#8:NC#16:pa#64:\
+ :op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m:
+
+dg+color|Color info for Data General D470C terminals in ANSI mode:\
+ :Co#16:NC#53:pa#256:tc=dg+color8:
+
+dgmode+color8|Color info for Data General D220/D230C terminals in DG mode:\
+ :ut:\
+ :Co#8:NC#16:pa#64:\
+ :AB=\036B%+^B:AF=\036A%+^B:Sb=\036B%+0:Sf=\036A%+0:\
+ :op=\036Ad\036Bd:
+
+dgmode+color|Color info for Data General D470C terminals in DG mode:\
+ :Co#16:pa#256:tc=dgmode+color8:
+
+dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode:\
+ :cc:ut:\
+ :Co#52:NC#53:pa#26:\
+ :oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00:\
+ :op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D:
+
+# Colors are in the order: normal, reverse, dim, dim + reverse.
+dg+ccc|Configurable color info for DG D430C terminals in DG mode:\
+ :cc:ut:\
+ :Co#52:NC#53:pa#26:\
+ :oc=\036RG01\07200??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00:\
+ :op=\036RF4831\072\036RF2>31;\036RF1=31<\036RF3?31=:\
+ :sp=\036RG2%+^P%+^P:
+
+# The generic DG terminal type (an 8-bit-clean subset of the 6053)
+# Initialization string 1 sets:
+# ^R - vertical scrolling enabled
+# ^C - blinking enabled
+dg-generic|Generic Data General terminal in DG mode:\
+ :NL:am:bw:ms:xo:\
+ :co#80:li#24:\
+ :bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:i1=^R^C:le=^Y:\
+ :mb=^N:me=^O^U^]:mh=^\:nd=^X:nw=^J:ps=^Q:se=^]:sf=^J:so=^\:\
+ :ue=^U:up=^W:us=^T:tc=dgkeys+11:
+
+# According to the 4.4BSD termcap file, the dg200 :cm: should be the
+# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
+# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
+# maybe they were originally nuls (which would fit).
+
+dg200|data general dasher 200:\
+ :NL:am:bs:bw:\
+ :co#80:li#24:\
+ :bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:k0=^^z:\
+ :k1=^^q:k2=^^r:k3=^^s:k4=^^t:k5=^^u:k6=^^v:k7=^^w:k8=^^x:\
+ :k9=^^y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:l0=f10:le=^Y:nd=^X:\
+ :nw=^J:se=^^E:sf=^J:so=^^D:ue=^U:up=^W:us=^T:
+
+# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
+dg210|dg-ansi|Data General 210/211:\
+ :am:\
+ :co#80:li#24:\
+ :cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:do=\E[B:ho=\E[H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:nd=\E[C:\
+ :nl=\E[B:nw=\r\E[H\E[A\n:se=\E[0;m:so=\E[7;m:ue=\E[0;m:\
+ :up=\E[A:us=\E[4;m:
+# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
+# courtesy of Carlos Rucalde of Vantage Software, Inc.
+# (dg211: this had :cm=\020%r%.%:., which was an ancient termcap hangover.
+# I suspect the d200 function keys actually work on the dg211, check it out.)
+dg211|Data General d211:\
+ :k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb=^Y:l0@:nw=^M^Z:\
+ :se=\036E\200/>:sf@:so=5\036D:ta=^I:te=^L:ti=^L^R:ve=^L:\
+ :vs=^L^R:tc=dg200:
+
+# dg450 from Cornell (not official)
+dg450|dg6134|data general 6134:\
+ :le@:nd=^X:tc=dg200:
+
+# Not official...
+# Note: lesser Dasher terminals will not work with vi because vi insists upon
+# having a command to move straight down from any position on the bottom line
+# and scroll the screen up, or a direct vertical scroll command. The 460 and
+# above have both, the D210/211, for instance, has neither. We must use ANSI
+# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
+# backspace on all terminals. This is not so in DG mode.
+# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
+# grounds that there is no matching ":ml:"
+dg460-ansi|Data General Dasher 460 in ANSI-mode:\
+ :am:bs:ms:ul:\
+ :co#80:it#8:li#24:\
+ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%2;%2H:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=^^F@:k0=\E[001z:\
+ :k1=\E[002z:k2=\E[003z:k3=\E[004z:k4=\E[005z:k5=\E[006z:\
+ :k6=\E[007z:k7=\E[008z:k8=\E[009z:k9=\E[00\072z:kb=\E[D:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:l1=f2:l2=f3:\
+ :l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l9=f10:le=^H:mb=\E[5m:\
+ :me=\E(B\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nl=\ED:ps=\E[i:\
+ :se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:u6=\E[%d;%dR:\
+ :u7=\E[6n:u8=\E[5n:u9=\E[0n:ue=\E[05:up=\E[A:us=\E[4m:
+# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
+# Data General 605x
+# Ought to work for a Model 6242, Type D210 as well as a 605x.
+# Note that the cursor-down key transmits ^Z. Job control users, beware!
+# This also matches a posted description of something called a `Dasher 100'
+# so there's a dg100 alias here.
+# (dg6053: the 4.4BSD file had :le=^H:, :do=^J:, :nd=^S:. -- esr)
+dg6053-old|dg100|data general 6053:\
+ :am:bs:bw:ul:\
+ :co#80:li#24:\
+ :bc=^Y:bl=^G:ce=^K:cl=^L:cm=\020%r%.%.:cr=^M:do=^Z:ho=^H:\
+ :is=^R:k0=^^q:k1=^^r:k2=^^s:k3=^^t:k4=^^u:k5=^^v:k6=^^w:\
+ :k7=^^x:k8=^^y:k9=^^z:kb=^Y:kd=^Z:kh=^H:kl=^Y:kr=^X:ku=^W:\
+ :le=^Y:nd=^X:se=\200^^E:so=\200\200\200\200\200\036D:\
+ :ta=^I:te=^L:ti=^L^R:ue=^U:up=^W:us=^T:ve=^L:vs=^L^R:
+
+# (Some performance can be gained over the generic DG terminal type)
+dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053:\
+ :xo@:\
+ :ho=^P\200\200:ll=^P\200^W:tc=dg-generic:
+
+# Like 6053, but adds reverse video and more keypad and function keys.
+d200|d200-dg|Data General DASHER D200:\
+ :ho@:ll@:md=^^D^T:me=\017\025\035\036E:mr=^^D:se=^^E^]:\
+ :so=^^D^\:tc=dgkeys+15:tc=dg6053:
+
+# DASHER D210 series terminals in ANSI mode.
+# Reverse video, no insert/delete character/line, 7 bits/character only.
+#
+# Initialization string 1 sets:
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <4 - print characters regardless of attributes
+d210|d214|Data General DASHER D210 series:\
+ :NL:am:bw:ms:xo:\
+ :co#80:li#24:\
+ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:cb=\E[1K:\
+ :cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:do=\E[B:\
+ :ho=\E[H:i1=\E[<0;<1;<4l:le=^H:ll=\E[H\E[A:mb=\E[5m:\
+ :md=\E[4;7m:me=\E[m:mh=\E[2m:mr=\E[7m:nd=\E[C:nw=^J:\
+ :se=\E[m:sf=^J:so=\E[2;7m:ue=\E[m:up=\E[A:us=\E[4m:\
+ :tc=dgkeys+7b:
+
+# DASHER D210 series terminals in DG mode.
+# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
+d210-dg|d214-dg|Data General DASHER D210 series in DG mode:\
+ :xo:\
+ :cd=^^FF:tc=d200-dg:
+
+# DASHER D211 series terminals in ANSI mode.
+# Like the D210, but with 8-bit characters and local printer support.
+#
+# Initialization string 2 sets:
+# \E[2;1;1;1v
+# 2;1 - 8 bit operations
+# 1;1 - 8 bit (international) keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+# ^O - primary character set
+#
+d211|d215|Data General DASHER D211 series:\
+ :km:\
+ :is=\E[2;1;1;1v\E(B\E)4\017:ps=\E[i:tc=dgkeys+8b:\
+ :tc=d210:
+
+# Initialization string 2 sets:
+# \E[2;0;1;0v
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+# ^O - primary character set
+d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode:\
+ :km@:\
+ :is=\E[2;0;1;0v\E(0\017:tc=dgkeys+7b:tc=d211:
+
+# Like the D210 series, but adds support for 8-bit characters.
+#
+# Reset string 2 sets:
+# ^^N - secondary character set
+# ^^FS0> - 8 bit international character set
+# ^^O - primary character set
+# ^^FS00 - default character set (matching the native keyboard language)
+#
+d211-dg|d215-dg|Data General DASHER D211 series in DG mode:\
+ :km:\
+ :rs=\036N\036FS0>\036O\036FS00:tc=d210-dg:
+
+d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode:\
+ :tc=d211-dg:
+
+# Enhanced DG mode with changes to be more UNIX compatible.
+d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode:\
+ :5i:\
+ :it#8:\
+ :#2=^^Pf:#4=^^Pd:%9=^^P0:%f=^^P1:%i=^^Pc:\
+ :ac=a\177j$k"l!m#n)q+t'u&v(w%x*:ae=\036FS00:\
+ :as=\036FS11:ce=^^PE:ch=\020%.\177:cl=^^PH:cv=\020\177%.:\
+ :do=^^PB:ho=^^PF:i1=\022\003\036P@1:i2=\036Fz0:kC=^^PH:\
+ :kE=^^PE:kd=^^PB:kh=^^PF:kl=^^PD:kr=^^PC:ku=^^PA:le=^^PD:\
+ :mb=^^PI:me=\036PJ\025\035\036E\036FS00:nd=^^PC:pf=^^Fa:\
+ :po=^^F`:ps=\036F?9:rs=\036N\036FS0E\036O\036FS00:sf=^J:\
+ :ta=^I:up=^^PA:tc=dgkeys+15:tc=d216-dg:
+d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines:\
+ :li#25:\
+ :i2=\036Fz2:tc=d216+:
+
+d217-unix|Data General DASHER D217 in DG-UNIX mode:\
+ :tc=d216-unix:
+d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines:\
+ :tc=d216-unix-25:
+
+# DASHER D220 color terminal in ANSI mode.
+# Like the D470C but with fewer colors and screen editing features.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <4 - print characters regardless of attributes
+# \E[m - all attributes off
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+#
+d220|Data General DASHER D220:\
+ :5i@:\
+ :AL@:DL@:al@:dl@:i1=\E[<0;<1;<4l\E[m:pf@:po@:r1=\Ec:\
+ :tc=dg+color8:tc=d470c:
+
+d220-7b|Data General DASHER D220 in 7 bit mode:\
+ :5i@:\
+ :AL@:DL@:al@:dl@:i1=\E[<0;<1;<4l\E[m:pf@:po@:r1=\Ec:\
+ :tc=dg+color8:tc=d470c-7b:
+
+# Initialization string 3 sets:
+# - default cursor (solid rectangle)
+# Reset string 2 sets:
+# ^^N - secondary character set
+# ^^FS0> - 8 bit international character set
+# ^^O - primary character set
+# ^^FS00 - default character set (matching the native keyboard language)
+#
+d220-dg|Data General DASHER D220 color terminal in DG mode:\
+ :5i@:\
+ :al@:dl@:ho@:i2=\036FQ2:is@:ll@:pf@:po@:r1@:\
+ :rs=\036N\036FS0>\036O\036FS00:tc=dgmode+color8:\
+ :tc=d470c-dg:
+
+# DASHER D230C color terminal in ANSI mode.
+# Like the D220 but with minor ANSI compatibility improvements.
+#
+d230c|d230|Data General DASHER D230C:\
+ :ke=\E[2;1v:ks=\E[2;0v:mb=\E[5;50m:md=\E[4;7;50m:\
+ :me=\E[50m\E)4\017:mh=\E[2;50m:mr=\E[7;50m:nw=^M^J:\
+ :se=\E[50m:so=\E[2;7;50m:ue=\E[50m:us=\E[4;50m:\
+ :tc=dgkeys+7b:tc=d220:
+
+d230c-dg|d230-dg|Data General DASHER D230C in DG mode:\
+ :tc=d220-dg:
+
+# DASHER D400/D450 series terminals.
+# These add intelligent features like insert/delete to the D200 series.
+#
+# Initialization string 2 sets:
+# ^^FQ2 - default cursor (solid rectangle)
+# ^^FW - character protection disabled
+# ^^FJ - normal (80 column) mode
+# ^^F\^ - horizontal scrolling enabled (for alignment)
+# ^^FX004? - margins at columns 0 and 79
+# ^^F] - horizontal scrolling disabled
+# ^^O - primary character set
+# ^^FS00 - default character set (the keyboard native language)
+# - (should reset scrolling regions, but that glitches the screen)
+# Reset string 1 sets:
+# ^^FA - all terminal defaults except scroll rate
+# Reset string 2 sets:
+# ^^F] - horizontal scrolling disabled
+# ^^FT0 - jump scrolling
+#
+d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series:\
+ :5i:\
+ :ac=j$k"l!m#n)q+t'u&v(w%x*:ae=^^O:al=^^FH:as=^^N:\
+ :ch=\020%.\177:cv=\020\177%.:dc=^^K:dl=^^FI:\
+ :eA=\036N\036FS11\036O:ei=:ho=^^FG:ic=^^J:im=:\
+ :is=\036FQ2\036FW\036FJ\036F\136\036FX004?\036F]\036O\036FS00:\
+ :ll=\036FG\027:me=\017\025\035\036E\036O:pf=^^Fa:\
+ :po=^^F`:r1=^^FA:r2=\036F]\036FT0:sr=^^I:ve=\036FQ2:\
+ :vi=\036FQ0:tc=d210-dg:
+
+# DASHER D410/D460 series terminals in ANSI mode.
+# These add a large number of intelligent terminal features.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[5;0v - normal (80 column) mode
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+# Initialization string 2 sets:
+# \E[3;2;2;1;1;1v
+# 3;2 - default cursor (solid rectangle)
+# 2;1 - 8 bit operations
+# 1;1 - international keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+# ^O - primary character set
+#
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+# \E[<2h - horizontal scrolling disabled
+#
+# Reset string 2 sets:
+# \E[4;0;2;1;1;1v
+# 4;0 - jump scrolling
+# 2;1 - 8 bit operations
+# 1;1 - 8 bit (international) keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+#
+d410|d411|d460|d461|Data General DASHER D410/D460 series:\
+ :5i:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:\
+ :ac=j$k"l!m#n)q+t'u&v(w%x*:ae=\E)4\017:al=\E[L:\
+ :as=\E)6\016:dc=\E[P:dl=\E[M:ei=:\
+ :i1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h:\
+ :ic=\E[@:im=:is=\E[3;2;2;1;1;1v\E(B\E)4\017:me=\E[m:\
+ :pf=\E[4i:po=\E[5i:r1=\Ec\E[<2h:\
+ :r2=\E[4;0;2;1;1;1v\E(B\E)4:sr=\EM:ve=\E[3;2v:\
+ :vi=\E[3;0v:tc=d211:
+
+# Initialization string 2 sets:
+# \E[3;2;2;0;1;0v
+# 3;2 - default cursor (solid rectangle)
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+# ^O - primary character set
+#
+# Reset string 2 sets:
+# \E[4;0;2;0;1;0v
+# 4;0 - jump scrolling
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+#
+d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode:\
+ :km@:\
+ :ae=^O:as=^N:eA=\E)6:is=\E[3;2;2;0;1;0v\E(0\017:me=\E[m:\
+ :rs=\E[4;0;2;0;1;0v\E(0:tc=dgkeys+7b:tc=d410:
+
+d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode:\
+ :km:\
+ :ae=\036FS00:as=\036FS11:eA@:\
+ :me=\017\025\035\036E\036FS00:tc=d400-dg:
+
+# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[5;1v - compressed (135 column) mode
+# \E[1;1;126 - margins at columns 1 and 126
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+# \E[5;1v - compressed (135 column) mode
+# \E[1;1;126w - margins at columns 1 and 126
+# \E[<2h - horizontal scrolling disabled
+#
+d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode:\
+ :co#126:\
+ :i1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h:\
+ :r1=\Ec\E[5;1v\E[1;1;126w\E[<2h:tc=d410:
+
+d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode:\
+ :co#126:\
+ :i1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h:\
+ :r1=\Ec\E[5;1v\E[1;1;126w\E[<2h:tc=d410-7b:
+
+d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode:\
+ :tc=d410-dg:
+
+# These add intelligent features like scrolling regions.
+d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode:\
+ :al=^^FH:cl=^^FE:dc=^^K:dl=^^FI:ei=:ho=^^FG:ic=^^J:im=:\
+ :is=\036FQ5\036FW\036FJ\036F\136\036FX004F\036O\036FS00:\
+ :ll=\036FG\036PA:ps=^A:r1=\036FA\036FT0:r2=\036P@1:\
+ :rc=\036F}11:sc=\036F}10:sr=^^I:ve=\036FQ5:vi=\036FQ0:\
+ :tc=d216+:
+d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode:\
+ :co#132:\
+ :is=\036FQ5\036FW\036FK\036F\136\036FX0083\036O\036FS00:\
+ :rs=\036P@1\036FK\036FX0083:tc=d412-unix:
+d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines:\
+ :li#25:\
+ :i2=\036Fz2:tc=d462+:
+d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line:\
+ :es:hs:\
+ :cl=\036FG\036PH:fs=\036F}01\022:\
+ :i2=\036Fz2\036F}00\036FB180000\036F}01:ll@:tc=d462+:
+
+# Relative cursor motions are confined to the current window,
+# which is not what the scrolling region specification expects.
+# Thus, relative vertical cursor positioning must be deleted.
+d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region:\
+ :do@:ll@:up@:tc=d462+:
+
+d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode:\
+ :tc=d412-unix:
+d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode:\
+ :tc=d412-unix-w:
+d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines:\
+ :tc=d412-unix-25:
+d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line:\
+ :tc=d412-unix-s:
+d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region:\
+ :tc=d412-unix-sr:
+
+d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode:\
+ :tc=d413-unix:
+d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode:\
+ :tc=d413-unix-w:
+d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines:\
+ :tc=d413-unix-25:
+d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line:\
+ :tc=d413-unix-s:
+d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region:\
+ :tc=d413-unix-sr:
+
+d430c-dg|d430-dg|Data General D430C in DG mode:\
+ :tc=d413-dg:tc=dg+fixed:
+d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors:\
+ :tc=d413-dg:tc=dg+ccc:
+
+d430c-unix|d430-unix|Data General D430C in DG-UNIX mode:\
+ :tc=d413-unix:tc=dgunix+fixed:
+d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode:\
+ :tc=d413-unix-w:tc=dgunix+fixed:
+d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines:\
+ :tc=d413-unix-25:tc=dgunix+fixed:
+d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line:\
+ :tc=d413-unix-s:tc=dgunix+fixed:
+d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region:\
+ :tc=d413-unix-sr:tc=dgunix+fixed:
+d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors:\
+ :tc=d413-unix:tc=dgunix+ccc:
+d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors:\
+ :tc=d413-unix-w:tc=dgunix+ccc:
+d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors:\
+ :tc=d413-unix-25:tc=dgunix+ccc:
+d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors:\
+ :tc=d413-unix-s:tc=dgunix+ccc:
+d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors:\
+ :tc=d413-unix-sr:tc=dgunix+ccc:
+
+# DASHER D470C color terminal in ANSI mode.
+# Like the D460 but with 16 colors and without a compressed mode.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+d470c|d470|Data General DASHER D470C:\
+ :i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=dg+color:\
+ :tc=d460:
+
+d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode:\
+ :i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=dg+color:\
+ :tc=d460-7b:
+
+# Initialization string 2 sets:
+# ^^FQ2 - default cursor (solid rectangle)
+# ^^FW - character protection disabled
+# ^^F\^ - horizontal scrolling enabled (for alignment)
+# ^^FX004? - margins at columns 0 and 79
+# ^^F] - horizontal scrolling disabled
+# ^^O - primary character set
+# ^^FS00 - default character set (the keyboard native language)
+# - (should reset scrolling regions, but that glitches the screen)
+#
+d470c-dg|d470-dg|Data General DASHER D470C in DG mode:\
+ :is=\036FQ2\036FW\036F\136\036FX004?\036F]\036O\036FS00:\
+ :tc=dgmode+color:tc=d460-dg:
+
+# DASHER D555 terminal in ANSI mode.
+# Like a D411, but has an integrated phone.
+d555|Data General DASHER D555:\
+ :tc=d411:
+d555-7b|Data General DASHER D555 in 7-bit mode:\
+ :tc=d411-7b:
+d555-w|Data General DASHER D555 in wide mode:\
+ :tc=d411-w:
+d555-7b-w|Data General DASHER D555 in wide 7-bit mode:\
+ :tc=d411-7b-w:
+d555-dg|Data General DASHER D555 series in DG mode:\
+ :tc=d411-dg:
+
+# DASHER D577 terminal in ANSI mode.
+# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
+d577|Data General DASHER D577:\
+ :tc=d411:
+d577-7b|Data General DASHER D577 in 7-bit mode:\
+ :tc=d411-7b:
+d577-w|Data General DASHER D577 in wide mode:\
+ :tc=d411-w:
+d577-7b-w|Data General DASHER D577 in wide 7-bit mode:\
+ :tc=d411-7b-w:
+
+d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode:\
+ :tc=d411-dg:
+
+# DASHER D578 terminal.
+# Like a D577, but without compressed mode; like a D470C in this respect.
+#
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
+#
+d578|Data General DASHER D578:\
+ :i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=d577:
+d578-7b|Data General DASHER D578 in 7-bit mode:\
+ :i1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h:tc=d577-7b:
+
+#### Datamedia (dm)
+#
+# Datamedia was headquartered in Nashua, New Hampshire until it went
+# out of business in 1993, but the ID plates on the terminals referred
+# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
+# manufacturer which threw out all information about the terminals.
+#
+
+cs10|colorscan|Datamedia Color Scan 10:\
+ :ms:\
+ :co#80:li#24:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%2;%2H:cr=^M:\
+ :do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:\
+ :so=\E[7m:ue=\E[m:up=\E[A:us=\E[4m:
+cs10-w|Datamedia Color Scan 10 with 132 columns:\
+ :co#132:\
+ :cm=\E[%i%2;%3H:tc=cs10:
+
+# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
+dm1520|dm1521|datamedia 1520:\
+ :am:bs:xn:\
+ :co#80:it#8:li#24:\
+ :bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
+ :kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:nd=^\:sf=^J:ta=^I:up=^_:
+# dm2500: this terminal has both :IC: and :im:. Applications using
+# termcap/terminfo directly (rather than through ncurses) might be confused.
+dm2500|datamedia2500|datamedia 2500:\
+ :bs:nc:\
+ :co#80:li#24:\
+ :al=15\020\n\030\035\030\035:bl=^G:ce=^W:cl=^^^^\177:\
+ :cm=\014%r%n%.%.:dc=10*\020\010\030\035:\
+ :dl=10*\020\032\030\035:dm=^P:do=^J:ed=^X^]:\
+ :ei=10\377\377\030\035:ho=^B:ic=10*\020\034\030\035:\
+ :im=^P:le=^H:nd=^\:pc=\377:se=^X^]:sf=^J:so=^N:up=^Z:
+# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
+# also, has a meta-key.
+# From: <[email protected]>
+# (dmchat: ":MT:" changed to ":km:" -- esr)
+dmchat|dmchat version of datamedia 2500:\
+ :km:\
+ :al=1*\020\n\030\035\030\035:dl=2\020\032\030\035:\
+ :tc=dm2500:
+# (dm3025: ":MT:" changed to ":km:" -- esr)
+dm3025|datamedia 3025a:\
+ :bs:km:\
+ :co#80:it#8:li#24:\
+ :al=130\EP\n\EQ:bl=^G:cd=2\EJ:ce=\EK:cl=2\EM:\
+ :cm=\EY%r%+ %+ :cr=^M:dc=6\010:dl=130\EP\EA\EQ:dm=\EP:\
+ :do=^J:ed=\EQ:ei=\EQ:ho=\EH:im=\EP:ip=6:is=\EQ\EU\EV:le=^H:\
+ :nd=\EC:se=\EO0:sf=^J:so=\EO1:ta=^I:up=\EA:
+dm3045|datamedia 3045a:\
+ :am:bs:eo:km@:ul:xn:\
+ :al@:dc=6\EB:dl@:dm@:ed@:ei=\EP:is=\EU\EV:k0=\Ey\r:k1=\Ep\r:\
+ :k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
+ :k8=\Ew\r:k9=\Ex\r:kh=\EH:kr=\EC:ku=\EA:pc=\177:se@:so@:\
+ :tc=dm3025:
+# Datamedia DT80 soft switches:
+# 1 0=Jump 1=Smooth
+# Autorepeat 0=off 1=on
+# Screen 0=Dark 1=light
+# Cursor 0=u/l 1=block
+#
+# 2 Margin Bell 0=off 1=on
+# Keyclick 0=off 1=on
+# Ansi/VT52 0=VT52 1=Ansi
+# Xon/Xoff 0=Off 1=On
+#
+# 3 Shift3 0=Hash 1=UK Pound
+# Wrap 0=Off 1=On
+# Newline 0=Off 1=On
+# Interlace 0=Off 1=On
+#
+# 4 Parity 0=Odd 1=Even
+# Parity 0=Off 1=On
+# Bits/Char 0=7 1=8
+# Power 0=60Hz 1=50Hz
+#
+# 5 Line Interface 0=EIA 1=Loop
+# Aux Interface 0=EIA 1=Loop
+# Local Copy 0=Off 1=On
+# Spare
+#
+# 6 Aux Parity 0=Odd 1=Even
+# Aux Parity 0=Off 1=On
+# Aux Bits/Char 0=7 1=8
+# CRT Saver 0=Off 1=On
+# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
+dm80|dmdt80|dt80|datamedia dt80/1:\
+ :cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=%i\E[%d;%dH:do=^J:\
+ :ho=\E[H:me=\E[m:nd=\E[C:pf=\E[4i:po=\E[5i:ps=\E[0i:\
+ :se=\E[m:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:us=\E[4m:tc=vt100:
+# except in 132 column mode, where it needs a little padding.
+# This is still less padding than the vt100, and you can always turn on
+# the ^S/^Q handshaking, so you can use vt100 flavors for things like
+# reverse video.
+dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode:\
+ :co#132:\
+ :cd=20\E[0J:ce=20\E[0K:cl=50\E[H\E[2J:cm=5\E[%i%d;%dH:\
+ :do=^J:up=5\E[A:tc=dm80:
+# From: Adam Thompson <[email protected]> Sept 10 1995
+dt80-sas|Datamedia DT803/DTX for SAS usage:\
+ :am:bw:\
+ :co#80:li#24:\
+ :ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
+ :ae=\EG:al=\EL:as=\EF:bl=^G:cd=^K:ce=^]:cl=^L:\
+ :cm=\E=%r%+ %+ :cr=^M:ct=\E'0:dl=\EM:do=\EB:ff=^L:ho=^Y:\
+ :is=\E)0\E<\EP\E'0\E$2:kC=^L:kE=^]:kS=^K:kd=^J:kh=^Y:kl=^H:\
+ :kr=^\:ku=^_:le=^H:me=^X:mr=\E$2\004:nd=^\:pf=^O:po=^N:se=^X:\
+ :sf=\EB:so=\E$2\004:sr=\EI:st=\E'1:ta=^I:up=^_:
+
+# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
+# These aren't end-all Excel termcaps; but do insert/delete char/line
+# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
+# The naming convention has been bent somewhat, with the use of E? (where
+# E is for 'Excel') as # a name. This was done to distinguish the entries
+# from the other Datamedias in use here, and yet to associate a model of
+# the Excel terminals with the regular datamedia terminals that share
+# major characteristics.
+excel62|excel64|datamedia Excel 62:\
+ :dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
+ :k9=\EOy:kb=^H:kd=^J:kl=^H:tc=dt80:
+excel62-w|excel64-w|datamedia Excel 62 in 132 char mode:\
+ :dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
+ :k9=\EOy:kb=^H:kd=^J:kl=^H:tc=dt80w:
+excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode:\
+ :dc=\E[P:ei=\E[4l:im=\E[4h:k5=\EOu:k6=\EOv:k7=\EOw:k8=\EOx:\
+ :k9=\EOy:kb=^H:kd=^J:kl=^H:vb=\E[?5l\E[?5h:tc=dt80:
+
+#### Falco
+#
+# Falco Data Products
+# 440 Potrero Avenue
+# Sunnyvale, CA 940864-196
+# Vox: (800)-325-2648
+# Fax: (408)-745-7860
+# Net: [email protected]
+#
+# Current Falco models as of 1995 are generally ANSI-compatible and support
+# emulations of DEC VT-series, Wyse, and Televideo types.
+#
+
+# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
+# This terminal was released around 1983 and was discontinued long ago.
+# The standout and underline highlights are the same.
+falco|ts1|ts-1|falco ts-1:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :al=\EE:bl=^G:cd=\EY:ce=\ET\EG0\010:cl=\E*:cm=\E=%+ %+ :\
+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=\Er:ho=^^:im=\Eq:is=\Eu\E3:\
+ :k0=^A0\r:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:me=\Eg0:nd=^L:\
+ :se=\Eg0:sf=^J:so=\Eg1:ta=^I:ue=\Eg0:up=^K:us=\Eg1:
+falco-p|ts1p|ts-1p|falco ts-1 with paging option:\
+ :am:bs:da:db:mi:ms:ul:\
+ :co#80:it#8:li#24:\
+ :al=\EE:bl=^G:bt=\EI:cd=\EY:ce=\ET\EG0\010\Eg0:cl=\E*:\
+ :cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=\E[B:ei=\Er:im=\Eq:\
+ :is=\EZ\E3\E_c:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:me=\Eg0:nd=\E[C:se=\Eg0:sf=^J:so=\Eg4:ta=^I:te=\E_b:\
+ :ti=\E_d:ue=\Eg0:up=\E[A:us=\Eg1:
+# (ts100: I added <rmam>/<smam> based on the init string -- esr)
+ts100|ts100-sp|falco ts100-sp:\
+ :am:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E~E:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E~W:dl=\E~R:do=^J:eA=\E(B\E)0:ei=:ho=\E[H:\
+ :i1=\E~)\E~ea:ic=\E~Q:im=:kb=^H:kd=\EOB:ke=\E[?1l\E>:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:\
+ :md=2\E[1m:me=2\E[0m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=^J:so=2\E[1;7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:tc=vt100+fnkeys:
+ts100-ctxt|falco ts-100 saving context:\
+ :te=\E~_b:ti=\E~_d\E[2J:tc=ts100:
+
+#### Florida Computer Graphics
+#
+
+# Florida Computer Graphics Beacon System, using terminal emulator program
+# "host.com", as provided by FCG. This description is for an early release
+# of the "host" program. Known bug: :cd: clears the whole screen, so it's
+# commented out.
+
+# From: David Bryant <cbosg!djb> 1/7/83
+beacon|FCG Beacon System:\
+ :am:da:db:\
+ :co#80:li#32:\
+ :al=\EE:bl=1\ESTART\r\E37\r\EEND\r:ce=\ET:cl=10\EZ:\
+ :cm=20\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:do=^J:ei=:ho=10\EH:\
+ :ic=\EQ:im=:le=^H:mb=\ESTART\r\E61,1\r\EEND\r:\
+ :me=20\ESTART\r\E78\r\E70,0\r\EEND\r:\
+ :mr=\ESTART\r\E59,1\r\EEND\r:nd=\EV:\
+ :se=20\ESTART\r\E70,0\r\EEND\r:sf=^J:\
+ :so=20\ESTART\r\E70,6\r\EEND\r:te=:\
+ :ti=10\ESTART\r\E2,0\r\E12\r\EEND\r:\
+ :ue=\ESTART\r\E60,0\r\EEND\r:up=\EU:\
+ :us=\ESTART\r\E60,1\r\EEND\r:
+
+#### Fluke
+#
+
+# The f1720a differences from ANSI: no auto margin, destructive
+# tabs, # of lines, funny highlighting and underlining
+f1720|f1720a|fluke 1720A:\
+ :xt:\
+ :co#80:li#16:sg#1:ug#1:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :do=\E[B:is=\E[H\E[2J:kd=^]:kl=^_:kr=^^:ku=^\:le=^H:me=\E[m:\
+ :nd=\E[C:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ue=\E[m:up=\E[A:\
+ :us=\E[4m:
+
+#### Liberty Electronics (Freedom)
+#
+# Liberty Electronics
+# 48089 Fremont Blvd
+# Fremont CA 94538
+# Vox: (510)-623-6000
+# Fax: (510)-623-7021
+
+# From: <[email protected]>
+# (f100: added empty <acsc> to suppress a tic warning;
+# made this relative to adm+sgr -- note that <invis> isn't
+# known to work for f100 but does on the f110. --esr)
+f100|freedom|freedom100|freedom model 100:\
+ :am:bs:bw:hs:mi:ms:xo:\
+ :co#80:li#24:\
+ :ac=:ae=\E$:al=8.5*\EE:as=\E%%:bl=^G:bt=\EI:cd=\EY:ce=\ET:\
+ :ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:cv=\E[%+ :\
+ :dc=\EW:dl=11.5*\ER:do=^J:ds=\Eg\Ef\r:ei=\Er:fs=^M:ho=^^:\
+ :im=\Eq:ip=6:is=\Eg\Ef\r\Ed:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
+ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
+ :k;=^AI\r:kB=\EI:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:\
+ :nd=^L:sf=^J:sr=\Ej:st=\E1:ta=^I:ts=\Eg\Ef:up=^K:vb=\Eb\Ed:\
+ :tc=adm+sgr:
+f100-rv|freedom-rv|freedom 100 in reverse video:\
+ :is=\Eg\Ef\r\Eb:vb=\Ed\Eb:tc=f100:
+# The f110 and f200 have problems with vi(1). They use the ^V
+# code for the down cursor key. When kcud1 is defined in terminfo
+# as ^V, the Control Character Quoting capability (^V in insert mode)
+# is lost! It cannot be remapped in vi because it is necessary to enter
+# a ^V to to quote the ^V that is being remapped!!!
+#
+# f110/f200 users will have to decide whether
+# to lose the down cursor key or the quoting capability. We will opt
+# initially for leaving the quoting capability out, since use of VI
+# is not generally applicable to most interactive applications
+# (f110: added :ta:, :kh: & <kcbt> from f100 -- esr)
+f110|freedom110|Liberty Freedom 110:\
+ :bw@:es:\
+ :it#8:ws#80:\
+ :ae=\E%%:al=\EE:as=\E$:dl=\ER:do=^V:ds=\Ef\r:ei=\Er\EO:\
+ :im=\EO\Eq:ip@:is@:k0=^AI\r:k;@:kA=\EE:kC=^^:kD=\EW:kE=\ET:\
+ :kI=\EQ:kL=\ER:kS=\EY:mb=\EG2:md=\EG0:mh=\EG@:pf=\Ea:po=\E`:\
+ :so=\EG<:sr=\EJ:ts=\Ef:vb=\Eb\Ed:ve=\E.2:vi=\E.1:tc=f100:
+f110-14|Liberty Freedom 110 14inch:\
+ :dc@:tc=f110:
+f110-w|Liberty Freedom 110 - 132 cols:\
+ :co#132:tc=f110:
+f110-14w|Liberty Freedom 110 14in/132 cols:\
+ :co#132:\
+ :dc@:tc=f110:
+# (f200: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
+f200|freedom200|Liberty Freedom 200:\
+ :am:bs:es:hs:mi:ms:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :ac=:ae=\E%%:al=\EE:as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:\
+ :ch=\E]%+ :cl=^Z:cm=\E=%+ %+ :cr=^M:cs=\Em0%+ %+ :ct=\E3:\
+ :cv=\E[%+ :dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=\Er:fs=^M:ho=^^:\
+ :im=\Eq:k0=^AI\r:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
+ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kC=^^:\
+ :kD=\EW:kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kl=^H:kr=^L:\
+ :ku=^K:le=^H:mb=\EG2:md=\EG0:mh=\EG@:nd=^L:pf=\Ea:po=\E`:\
+ :sf=^J:so=\EG<:sr=\EJ:st=\E1:ts=\Ef:up=^K:vb=\Eo\En:ve=\E.1:\
+ :vi=\E.0:tc=adm+sgr:
+f200-w|Liberty Freedom 200 - 132 cols:\
+ :co#132:tc=f200:
+# The f200 has the ability to reprogram the down cursor key. The key is
+# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
+# so powering the terminal off and on will not cause the change to be lost.
+f200vi|Liberty Freedom 200 for vi:\
+ :kd=^J:vb=\Eb\Ed:tc=f200:
+f200vi-w|Liberty Freedom 200 - 132 cols for vi:\
+ :co#132:tc=f200vi:
+
+#### GraphOn (go)
+#
+# Graphon Corporation
+# 544 Division Street
+# Campbell, CA 95008
+# Vox: (408)-370-4080
+# Fax: (408)-370-5047
+# Net: [email protected] (Troy Morrison)
+#
+#
+# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
+# including one odd hybrid that starts out life on power-up as a character
+# terminal, than can be switched to X graphics mode (driven over the serial
+# line) by an escape sequence. No info on this beast yet.
+# (go140: I added <rmam>/<smam> based on the init string -- esr)
+go140|graphon go-140:\
+ :bs:\
+ :co#80:it#8:li#24:\
+ :RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=10\E[J:ce=\E[K:\
+ :cl=10\E[H\E[2J:cm=\E[%i%2;%2H:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ei=\E[4l:if=/usr/share/tabset/vt100:im=\E[4h:\
+ :is=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:\
+ :kh=\E[H:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+go140w|graphon go-140 in 132 column mode:\
+ :am:\
+ :co#132:\
+ :is=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q:\
+ :tc=go140:
+# Hacked up vt200 termcap to handle GO-225/VT220
+# From: <[email protected]>
+# (go225: I added <rmam>/<smam> based on the init string -- esr)
+go225|go-225|Graphon 225:\
+ :am:bs:mi:xn:\
+ :co#80:it#8:li#25:vt#3:\
+ :RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=^J:\
+ :ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ks=\E=:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mr=\E[7m:nd=\E[C:r1=\E[!p\E[?7h\E[2;1;1#w:rc=\E8:\
+ :rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\
+ :so=\E[7m:sr=\EM:ta=^I:te=\E[!p\E[?7h\E[2;1;1#w:\
+ :ti=\E[2;0#w\E[1;25r:ue=\E[24m:up=\E[A:us=\E[4m:
+
+#### Harris (Beehive)
+#
+# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
+# Their terminal group is ancient history now (1995) though the parent
+# company is still in business.
+#
+
+# Beehive documentation is undated and marked Preliminary and has no figures
+# so we must have early Superbee2 (Model 600, according to phone conversation
+# with mfr.). It has proved reliable except for some missing padding
+# (notably after \EK and <nl> at bottom of screen).
+#
+# The key idea is that AEP mode is poison for :cm: & that US's in
+# the local memory should be avoided like the plague. That means
+# that the 2048 character local buffer is used as 25 lines of 80
+# characters, period. No scrolling local memory, folks. It also
+# appears that we cannot use naked INS LINE feature since it uses
+# US. The sbi fakes :al: with an 80-space insert that may be too
+# slow at low speeds; also spaces get converted to \040 which is
+# too long for some programs (not vi). DEL LINE is ok but slow.
+#
+# The <nl> string is designed for last line of screen ONLY; cup to
+# 25th line corrects the motion inherent in scrolling to Page 1.
+#
+# There is one understood bug. It is that the screen appears to
+# pop to a new (blank) page after a :nw:, or leave a half-line
+# ellipsis to a quad that is the extra 48 memory locations. The
+# data received is dumped into memory but not displayed. Not to
+# worry if :cm: is being used; the lines not displayed will be,
+# whenever the cursor is moved up there. Since :cm: is addressed
+# relative to MEMORY of window, nothing is lost; but beware of
+# relative cursor motion (:up:,:do:,:nd:,:le:). Recommended,
+# therefore, is setenv MORE -c .
+#
+# WARNING: Not all features tested.
+#
+# Timings are assembled from 3 sources. Some timings may reflect
+# SB2/Model 300 that were used if more conservative.
+# Tested on a Model 600 at 1200 and 9600 bd.
+#
+# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
+# placed on the keyboard and useless because of AEP, is made
+# into a backspace key. In use ESC must be pressed twice (to send)
+# and sending ^C must be prefixed by ESC to avoid that weird
+# transmit mode associated with ENTER key.
+#
+# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
+# the screen, then it has dropped into ENTER mode; hit
+# RESET--ONLINE--!tset.
+#
+# As delivered this machine has a FATAL feature that will throw
+# it into that strange transmit state (SPOW) if the space bar is
+# hit after a CR is received, but before receiving a LF (or a
+# few others).
+#
+# The circuits MUST be modified to eliminate the SPOW latch.
+# This is done by strapping on chip A46 of the I/O board; cut
+# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
+# chip. This mod has been checked out on a Mod 600 of Superbee II.
+# With this modification absurdly high timings on cr are
+# unnecessary.
+#
+# NOTE WELL that the rear panel switch should be set to CR/LF,
+# not AEP!
+#
+sb1|beehive superbee:\
+ :am:bs:bw:da:db:mi:ul:xb:\
+ :co#80:li#25:sg#1:ug#1:\
+ :al=3\EN\EL\EQ \EP \EO\ER\EA:\
+ :bl=^G:bt=650\E`:cd=3\EJ:ce=3\EK:cl=3\EH\EJ:cm=\EF%r%3%3:\
+ :cr=\r:ct=\E3:dc=3\EP:dl=100\EM:do=^J:ei=\ER:ho=1\EH:\
+ :im=\EQ\EO:is=\EE\EX\EZ\EO\Eb\Eg\ER:k0=\E2:k1=\Ep:k2=\Eq:\
+ :k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\E1:kE=\EK:\
+ :kI=\EQ\EO:kL=\EM:kM=\ER:kS=\EJ:kb=^_:kd=\EB:kh=\EH:kl=\ED:\
+ :kr=\EC:ku=\EA:l0=TAB CLEAR:l9=TAB SET:le=^H:me=\E_3:\
+ :nd=3\EC:se=\E_3:sf=^J:so=\E_1:st=\E1:ta=^I:te=:ti=\EO:\
+ :ue=\E_3:up=3\EA:us=\E_0:
+sbi|superbee|beehive superbee at Indiana U.:\
+ :xb:\
+ :al=1\EN\EL\EQ \EP \EO\ER\EA:cr=1\r:tc=sb1:
+# Alternate (older) description of Superbee - f1=escape, f2=^C.
+# Note: there are at least 3 kinds of superbees in the world. The sb1
+# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
+# The sb3 puts garbage on the bottom of the screen when you scroll with
+# the switch in the back set to CRLF instead of AEP. This description
+# is tested on the sb2 but should work on all with either switch setting.
+# The f1/f2 business is for the sb1 and the :xb: can be taken out for
+# the other two if you want to try to hit that tiny escape key.
+# This description is tricky: being able to use cup depends on there being
+# 2048 bytes of memory and the hairy <nl> string.
+superbee-xsb|beehive super bee:\
+ :am:da:db:xb:\
+ :co#80:it#8:li#25:\
+ :cd=3\EJ:ce=3\EK:cl=3\EH\EJ:cm=\EF%r%3%3:cr=1000\r:ct=\E3:\
+ :dc=3\EP:dl=100\EM:do=^J:ho=\EH:is=\EH\EJ:k1=\Ep:k2=\Eq:\
+ :k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:kd=\EB:kh=\EH:\
+ :kl=\ED:kr=\EC:ku=\EA:le=^H:me=\E_3:nd=\EC:se=\E_3:\
+ :sf=\n\200\200\200\n\200\200\200\EA\EK\200\200\200\ET\ET:\
+ :so=\E_1:st=\E1:ta=^I:up=3\EA:ve=^J:
+# This loses on lines > 80 chars long, use at your own risk
+superbeeic|super bee with insert char:\
+ :ei=\ER:ic=:im=\EQ:tc=superbee-xsb:
+sb2|sb3|fixed superbee:\
+ :xb@:tc=superbee:
+
+#### Beehive Medical Electronics
+#
+# Steve Seymour <[email protected]> writes (Wed, 03 Feb 1999):
+# Regarding your question though; Beehive terminals weren't made by Harris.
+# They were made by Beehive Medical Electronics in Utah. They went out of
+# business in the early '80s.
+#
+# (OK, then, I don't know why a couple of these say "harris beehive".)
+#
+
+# Reports are that most of these Beehive entries (except superbee) have not
+# been tested and do not work right. :se: is a trouble spot. Be warned.
+
+# (bee: :ic: was empty, which is obviously bogus -- esr)
+beehive|bee|harris beehive:\
+ :am:bs:mi:\
+ :co#80:li#24:\
+ :al=\EL:bt=\E>:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :dc=\EP:\
+ :dl=\EM:do=\EB:ei=\E@:ho=\EH:im=\EQ:kA=\EL:kB=\E>:kC=\EE:\
+ :kD=\EP:kE=\EK:kI=\EQ:kL=\EM:kM=\E@:kb=^H:kd=\EB:kh=\EH:\
+ :kl=\ED:kr=\EC:ku=\EA:le=^H:me=\Ed@:nd=\EC:se=\Ed@:so=\EdP:\
+ :ue=\Ed@:up=\EA:us=\Ed`:
+# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
+# good grief - does this entry make :sg:/:ug: when it doesn't have to?
+# look at those spaces in :se:/:so:. Seems strange to me...
+# (beehive: :if=/usr/share/tabset/beehive: removed, no such file. If you
+# really care, cook up one using ^F -- esr)
+beehive3|bh3m|beehiveIIIm|harris beehive 3m:\
+ :am:bs:\
+ :co#80:it#8:li#20:\
+ :al=160\023:bl=^G:cd=^R:ce=^P:cl=^E^R:cr=^M:dl=350\021:\
+ :do=^J:ho=^E:le=^H:ll=^E^K:nd=^L:se=\040^_:sf=^J:so=^]\040:\
+ :st=^F:ta=^I:up=^K:
+beehive4|bh4|beehive 4:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=\EE:cr=^M:do=^J:ho=\EH:le=\ED:nd=\EC:\
+ :sf=^J:up=\EA:
+# There was an early Australian kit-built computer called a "Microbee".
+# It's not clear whether this is for one of those or for a relative
+# of the Beehive.
+microb|microbee|micro bee series:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EF%+ %+ :cr=^M:do=^J:k1=\Ep:\
+ :k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\Ex:\
+ :kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:me=\Ed@:nd=\EC:\
+ :se=\Ed@:sf=^J:so=\040\EdP:ta=^I:ue=\Ed@:up=\EA:us=\Ed`:
+
+# 8675, 8686, and bee from Cyrus Rahman
+# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
+ha8675|harris 8675:\
+ :F1=^W:F2=\ER:F3=\EE:F4=\EI:F5=\Ei:F6=\Eg:\
+ :is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU:k1=^F:k2=^P:k3=^N:\
+ :k4=^V:k5=^J:k6=^T:k7=^H:k8=\177:k9=\Ee:k;=\Ed:tc=bee:
+# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
+# in :is: -- esr)
+ha8686|harris 8686:\
+ :F1=\EW:F2=\002\E{\003:F3=\002\E|\003:F4=\002\E}\003:\
+ :F5=\002\E~\003:F6=\002\E\177\003:\
+ :is=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#:\
+ :k1=\002\Ep\003:k2=\002\Eq\003:k3=\002\Er\003:\
+ :k4=\002\Es\003:k5=\E3:k6=\EI:k7=\ER:k8=\EJ:k9=\E(:k;=\Ej:\
+ :tc=bee:
+
+#### Hazeltine
+#
+# Hazeltine appears to be out of the terminal business as of 1995. These
+# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
+# Harris. They have a hazeltine.com domain (but no web page there ) and can
+# be reached at:
+#
+# Hazeltine
+# 450 East Pulaski Road
+# Greenlawn, New York 11740
+#
+# As late as 1993, manuals for the terminal product line could still be
+# purchased from:
+#
+# TRW Customer Service Division
+# 15 Law Drive
+# P.O. Box 2076
+# Fairfield, NJ 07007-2078
+#
+# They're now (1998) a subsidiary of General Electric, operating under the
+# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
+# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
+#
+
+# Since :nd: is blank, when you want to erase something you
+# are out of luck. You will have to do ^L's a lot to
+# redraw the screen. h1000 is untested. It doesn't work in
+# vi - this terminal is too dumb for even vi. (The code is
+# there but it isn't debugged for this case.)
+hz1000|hazeltine 1000:\
+ :bs:\
+ :co#80:li#12:\
+ :bl=^G:cl=^L:cr=^M:do=^J:ho=^K:le=^H:nd=\040:sf=^J:
+# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
+hz1420|hazeltine 1420:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%+ :\
+ :cr=^M:dl=\E^S:do=^J:le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:ta=^N:\
+ :up=\E^L:
+# New "safe" cursor movement (11/87) from <[email protected]>. Prevents
+# freakout with out-of-range args and tn3270. No hz since it needs to
+# receive tildes.
+hz1500|hazeltine 1500:\
+ :am:bs:hz:\
+ :co#80:li#24:\
+ :al=40~\032:bl=^G:cd=10~\030:ce=~^O:cl=~^\:\
+ :cm=~\021%r%>^^ %+`%+`:cr=^M:dl=40~\023:do=~^K:ho=~^R:\
+ :kd=^J:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:nd=^P:se=~^Y:sf=^J:\
+ :so=~^_:up=~^L:
+# h1510 assumed to be in sane escape mode. Else use h1500.
+# (h1510: early versions of this entry apparently had ":se=\E^_:,
+# :so=\E^Y:, but these caps were commented out in 8.3; also,
+# removed incorrect and overridden ":do=^J:" -- esr)
+hz1510|hazeltine 1510:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%.:\
+ :cr=^M:dl=\E^S:do=\E^K:le=^H:nd=^P:sf=^J:up=\E^L:
+# Hazeltine 1520
+# The following switch settings are assumed for normal operation:
+# FULL CR U/L_CASE ESCAPE
+# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
+# Other switches may be set for operator convenience or communication
+# requirements.
+hz1520|Hazeltine 1520:\
+ :am:bs:bw:ms:\
+ :co#80:li#24:\
+ :al=\E^Z:bl=^G:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%.%.:\
+ :cr=^M:dl=\E^S:do=^J:ho=\E^R:kA=\E^Z:kC=\E^\:kE=\E^O:\
+ :kL=\E^S:kS=\E^X:kb=^H:kd=\E^K:kh=\E^R:kl=^H:kr=^P:ku=\E^L:\
+ :le=^H:md=\E^_:me=\E^Y:nd=^P:r1=\E$\E\005\E?\E\031:\
+ :se=\E^Y:sf=^J:so=\E^_:up=\E^L:
+# This version works with the escape switch off
+# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
+hz1520-noesc|hazeltine 1520:\
+ :am:hz:\
+ :co#80:li#24:\
+ :al=~^Z:bl=^G:cd=~^X:ce=~^O:cl=~^\:cm=1~\021%r%.%.:cr=^M:\
+ :dl=~^S:do=~^K:ho=~^R:le=^H:nd=^P:se=~^Y:sf=^J:so=~^_:up=~^L:
+# Note: the h1552 appears to be the first Hazeltine terminal which
+# is not braindamaged. It has tildes and backprimes and everything!
+# Be sure the auto lf/cr switch is set to cr.
+hz1552|hazeltine 1552:\
+ :bs:\
+ :al=\EE:dl=\EO:do=^J:k1=\EP:k2=\EQ:k3=\ER:l1=blue:l2=red:\
+ :l3=green:tc=vt52:
+hz1552-rv|hazeltine 1552 reverse video:\
+ :do=^J:se=\ET:so=\ES:tc=hz1552:
+# Note: h2000 won't work well because of a clash between upper case and ~'s.
+hz2000|hazeltine 2000:\
+ :am:bs:nc:\
+ :co#74:li#27:\
+ :al=6~\032:bl=^G:cl=6~\034:cm=~\021%r%.%.:dl=6~\023:do=^J:\
+ :ho=~^R:le=^H:pc=\177:sf=^J:
+# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
+# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
+# to work ok. There is one problem though if one types a lot of garbage
+# characters very fast vi seems not able to keep up and hangs while trying
+# to insert. That's in insert mode while trying to insert in the middle of
+# a line. It might be because the Esprit doesn't have insert char and delete
+# char as a built in function. Vi has to delete to end of line and then
+# redraw the rest of the line.
+esprit|Hazeltine Esprit I:\
+ :am:bs:bw:\
+ :co#80:li#24:\
+ :al=\E^Z:bl=^G:bt=\E^T:cd=\E^W:ce=\E^O:cl=\E^\:\
+ :cm=\E\021%r%.%.:cr=^M:dl=\E^S:do=\E^K:ho=\E^R:is=\E?:\
+ :k0=^B0^J:k1=^B1^J:k2=^B2^J:k3=^B3^J:k4=^B4^J:k5=^B5^J:\
+ :k6=^B6^J:k7=^B7^J:k8=^B8^J:k9=^B9^J:kb=^H:kd=\E^K:ke=\E>:\
+ :kh=\E^R:kl=^H:kr=^P:ks=\E<:ku=\E^L:l0=0:l1=1:l2=2:l3=3:l4=4:\
+ :l5=5:l6=6:l7=7:l8=8:l9=9:le=^H:nd=^P:se=\E^Y:sf=^J:so=\E^_:\
+ :up=\E^L:
+esprit-am|hazeltine esprit auto-margin:\
+ :am:tc=esprit:
+# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
+# Vi it seems always wants to send a control J for "do" and it turned out
+# that the terminal would work somewhat if the auto LF/CR was turned off.
+# (hmod1: removed :dn=~^K: -- esr)
+hmod1|Hazeltine Modular 1:\
+ :am:bs:hz:\
+ :co#80:li#24:\
+ :al=~^Z:bl=^G:bt=~^T:cl=~^\:cm=~\021%r%.%.:cr=^M:dl=~^S:\
+ :do=~^K:ho=~^R:kd=~^K:kh=~^R:kl=^H:kr=^P:ku=~^L:le=^H:me=~^Y:\
+ :nd=^P:rc=~^Q:sc=~^E:se=~^Y:sf=^J:so=~^_:up=~^L:
+#
+# Hazeltine Executive 80 Model 30 (1554?)
+# from Will Martin <[email protected]> via BRL
+# Like VT100, except for different "am" behavior.
+hazel|exec80|h80|he80|Hazeltine Executive 80:\
+ :am:bs:pt:\
+ :co#80:it#8:li#24:vt#3:\
+ :bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
+ :cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
+ :is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
+ :ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
+ :nd=2\E[C:nl=^J:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=2\E[m:\
+ :so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
+
+#### IBM
+#
+
+ibm327x|line mode IBM 3270 style:\
+ :gn:\
+ :ce=^M:cl=^M^J:ho=^M:
+
+ibm3101|i3101|IBM 3101-10:\
+ :am:bs:xo:\
+ :co#80:li#24:\
+ :bl=^G:cd=\EJ:ce=\EI:cl=\EK:cm=\EY%+ %+ :cr=^M:ct=\EH:do=^J:\
+ :ho=\EH:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:nw=^M^J:\
+ :sf=^J:st=\E0:up=\EA:
+ibm3151|IBM 3151 display:\
+ :ae=\E>B:as=\E>A:is=\E S:me=\E4@:rs=\E S:s0=\E>B:te=\E>B:\
+ :ti=\E>B:tc=ibm3162:
+# From: Mark Easter <[email protected]> 29 Oct 1992
+# removed kend, knp, kpp -TD
+ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display:\
+ :am:bs:mi:ms:\
+ :co#80:it#8:li#24:\
+ :F1=\Ek\r:F2=\El\r:F3=\E!a\r:F4=\E!b\r:F5=\E!c\r:\
+ :F6=\E!d\r:F7=\E!e\r:F8=\E!f\r:F9=\E!g\r:FA=\E!h\r:\
+ :FB=\E!i\r:FC=\E!j\r:FD=\E!k\r:FE=\E!l\r:\
+ :ac=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370:\
+ :bl=^G:cd=\EJ:ce=\EI:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:dc=\EQ:\
+ :dl=\EO:do=\EB:ho=\EH:k1=\Ea\r:k2=\Eb\r:k3=\Ec\r:k4=\Ed\r:\
+ :k5=\Ee\r:k6=\Ef\r:k7=\Eg\r:k8=\Eh\r:k9=\Ei\r:k;=\Ej\r:\
+ :kA=\EN:kB=\E2:kC=\EL\r:kD=\EQ:kE=\EI:kI=\EP \010:kL=\EO:\
+ :kS=\EJ:kT=\E0:ka=\E 1:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
+ :kt=\E1:ku=\EA:le=\ED:mb=\E4D:md=\E4H:me=\E4@\E<@:mk=\E4P:\
+ :mr=\E4A:nd=\EC:pf=^P^T:po=^P^R:se=\E4@:sf=^J:so=\E4A:\
+ :te=\E>A:ti=\E>A:ue=\E4@:up=\EA:us=\E4B:
+
+ibm3161-C|IBM 3161-C NLS terminal using cartridge:\
+ :s0=\E>B:s1=\E>A:te=\E>B:ti=\E>B:tc=ibm3161:
+ibm3162|IBM 3162 display:\
+ :al=\EN:mb=\E4$a:md=\E4(a:me=\E4@:mk=\E40a:mr=\E4!a:\
+ :se=\E4>b:so=\E4!a:ue=\E4=b:us=\E4"a:tc=ibm3161-C:
+
+# This really should not use setab/setaf, but it is clear that the
+# original terminfo does not toggle red/blue colors as in setb/setf.
+ibm3164|i3164|IBM 3164:\
+ :ms:\
+ :Co#8:pa#64:\
+ :AB=\E4 %+@:op=\E4 "@:s0=\E>B:s1=\E>A:te=\E!9(N\E>B:\
+ :ti=\E!9/N\E>B:tc=ibm3161:
+
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display:\
+ :am:bw:ms:xo:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+ :SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
+ :do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:is=\Ec:\
+ :k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
+ :k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kD=\E[P:\
+ :kI=\E[139q:kN=\E[154q:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+
+ibmaed|IBM Experimental display:\
+ :am:bs:eo:ms:\
+ :co#80:it#8:li#52:\
+ :al=\EN:cd=\EJ:ce=\EI:cl=\EH\EK:cm=\EY%+ %+ :dc=\EQ:dl=\EO:\
+ :do=\EB:ei=:ho=\EH:ic=\EP:im=:kb=^H:kd=\EB:kl=\ED:kr=\EC:\
+ :ku=\EA:le=^H:me=\E0:nd=\EC:se=\E0:so=\E0:ta=^I:up=\EA:\
+ :vb=\EG:
+ibm-apl|apl|IBM apl terminal simulator:\
+ :li#25:tc=dm1520:
+# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
+# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
+ibmmono|IBM workstation monochrome:\
+ :es:hs:\
+ :al=\EL:dl=\EM:ds=\Ej\EY8 \EI\Ek:fs=\Ek:k0=\E<:k1=\ES:\
+ :k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\EY:\
+ :kF=\EE:kI=\200:kN=\EE:kP=\Eg:kR=\EG:kb=^H:kh=\EH:l0=f10:\
+ :md=\EZ:me=\Ew\Eq\Ez\EB:mk=\EF\Ef0;\Eb0;:mr=\Ep:se=\Ez:\
+ :so=\EZ:sr=\EA:ue=\Ew:us=\EW:tc=ibm3101:
+ibmega|IBM Enhanced Color Display:\
+ :cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
+ :tc=ibmmono:
+# This color scheme is assumed in some recent IBM terminal descriptions
+# (green on black, emulated on a 16-color terminal).
+ibm+color|IBM color definitions:\
+ :Co#8:NC#3:pa#64:\
+ :op=\E[32m\E[40m:
+ibm+16color|IBM aixterm color definitions:\
+ :Co#16:pa#256:
+ibm5154|IBM 5154 Color display:\
+ :Co#8:NC@:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:md@:tc=ibm5151:tc=ibm+color:
+ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline:\
+ :se=\EB:so=\EF\Ef3;:ue=\EB:us=\EF\Ef2;:tc=ibmmono:
+ibmvga-c|IBM VGA display color termcap:\
+ :cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
+ :tc=ibmega-c:
+ibmvga|IBM VGA display:\
+ :cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:tc=ibmega:
+# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
+rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display:\
+ :li#32:\
+ :ds=\Ej\EY@ \EI\Ek:tc=ibmmono:
+ibm6155|IBM 6155 Black & White display:\
+ :mb@:md@:tc=ibm5151:
+# Advanced Monochrome (6153) and Color (6154) Graphics Display:
+ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display:\
+ :li#31:\
+ :ds=\Ej\EY? \EI\Ek:tc=ibmmono:
+ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display:\
+ :li#31:\
+ :ds=\Ej\EY? \EI\Ek:mh=\EF\Ef7;:tc=ibmega-c:
+ibm6154|IBM 6154 Color displays:\
+ :mb@:md=\E[12m:me=\E[0;10m:s0=\E[10m:s1=\E[11m:s2=\E[12m:\
+ :tc=ibm5154:
+ibm6153|IBM 6153 Black & White display:\
+ :mb@:md=\E[12m:me=\E[0;10m:s0=\E[10m:s1=\E[11m:s2=\E[12m:\
+ :tc=ibm5151:
+ibm6153-90|IBM 6153 Black & White display:\
+ :co#90:li#36:\
+ :mb@:md@:tc=ibm5151:
+ibm6153-40|IBM 6153 Black & White display:\
+ :co#40:li#12:tc=ibm6153-90:
+ibm8512|ibm8513|IBM color VGA Terminal:\
+ :am:mi:ms:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DL=\E[%dM:RA=\E[?7l:SA=\E[?7h:\
+ :ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[L:as=^N:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:dl=\E[M:dm=\E[4h:\
+ :do=^J:ec=\E[%dX:ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\Eb\E[m\017\E[?7h:k0=\E[010q:k1=\E[001q:k2=\E[002q:\
+ :k3=\E[003q:k4=\E[004q:k5=\E[005q:k6=\E[006q:k7=\E[007q:\
+ :k8=\E[008q:k9=\E[009q:kd=\E[B:kh=\E[H:ku=\E[A:le=\E[D:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
+ :r1=\Eb\E[m\017\E[?7h\E[H\E[J:rc=\E[u:sc=\E[s:se=\E[m:\
+ :so=\E[7m:te=\E[20h:ti=\E[20;4l\E[?7h\Eb:ue=\E[m:up=\E[A:\
+ :us=\E[4m:tc=ibm8503:
+hft-c|HFT with Color:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:ac=jjkkllmmnnqqttuuvvwwxx:\
+ :me=\E[0m\E(B:s0=\E(B:s1=\E(0:tc=ibm5151:tc=ibm+color:
+hft-c-old|HFT with Color PC850:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:tc=ibm5151:tc=ibm+color:
+hft-old|AIWS High Function Terminal:\
+ :am:xo:\
+ :co#80:li#25:\
+ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=\E6:ho=\E[H:ic=\E[@:im=\E6:\
+ :k1=\E[001q:k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:\
+ :k6=\E[006q:k7=\E[007q:k8=\E[008q:k9=\E[009q:kN=\E[153q:\
+ :kP=\E[159q:ka=\E[010q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[8m:\
+ :mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:tc=ibm+color:
+ibm-system1|system1|ibm system/1 computer:\
+ :am:xt:\
+ :co#80:li#24:\
+ :bl=^G:cl=^Z:cm=\005%+ %+ :ho=^K:le=^H:nd=^\:sf=^J:up=^^:
+# lft-pc850 : IBM Low Function Terminal Device
+# lft "supports" underline, bold, and blink in the sense that the lft code
+# sets all the right bits. HOWEVER, depending upon the adapter, these
+# attributes may or may not be supported by the device driver.
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device:\
+ :am:bw:ms:xo:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[2J:ce=\E[0K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
+ :ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:is=\Ec:k1=\E[001q:\
+ :k2=\E[002q:k3=\E[003q:k4=\E[004q:k5=\E[005q:k6=\E[006q:\
+ :k7=\E[007q:k8=\E[008q:k9=\E[009q:kD=\E[P:kI=\E[139q:\
+ :kN=\E[154q:kP=\E[150q:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\E(B:\
+ :mr=\E[7m:nd=\E[C:rs=\Ec:se=\E[0m:sf=\ED:so=\E[7m:sr=\EL:\
+ :ue=\E[0m:up=\E[A:us=\E[4m:
+ibm5081|hft|IBM Megapel Color display:\
+ :ac=jjkkllmmnnqqttuuvvwwxx:mb@:md@:me=\E[0m\E(B:s0=\E(B:\
+ :s1=\E(0:tc=ibm5154:
+ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display:\
+ :es:hs:\
+ :li#33:\
+ :ds=\Ej\EYA \EI\Ek:fs=\Ek:tc=ibmega-c:
+ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display:\
+ :tc=hft-c:
+ibm8514|IBM 8514/a color VGA display:\
+ :es:hs:\
+ :ds=\Ej\EYI \EI\Ek:fs=\Ek:tc=hft:
+ibm8514-c|IBM 8514 color display with standout and underline:\
+ :es:hs:\
+ :li#41:\
+ :cr=^M:do=^J:ds=\Ej\EYI \EI\Ek:fs=\Ek:kb=^H:kd=^J:kl=^H:\
+ :nw=^M^J:sf=^J:ta=^I:tc=ibmega-c:
+
+#
+# AIX entries. IBM ships these with AIX 3.2.5.
+# -- added rc, sc based on manpage -TD
+# Note that we could use ibm+16color, but that is not how IBM defines this one.
+aixterm|IBM Aixterm Terminal Emulator:\
+ :es:hs:\
+ :ac=jjkkllmmnnqqttuuvvwwxx:ds=\E[?E:fs=\E[?F:md=\E[1m:\
+ :me=\E[0;10m\E(B:rc=\E8:s0=\E(B:s1=\E(0:sc=\E7:sr@:\
+ :ts=\E[?%dT:tc=ibm6154:
+aixterm-m|IBM AIXterm Monochrome Terminal Emulator:\
+ :es:hs:\
+ :ac=jjkkllmmnnqqttuuvvwwxx:ds=\E[?E:fs=\E[?F:md=\E[1m:\
+ :me=\E[0;10m\E(B:s0=\E(B:s1=\E(0:sr@:ts=\E[?%dT:\
+ :tc=ibm6153:
+aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator:\
+ :es:hs:\
+ :ds=\E[?E:fs=\E[?F:md=\E[1m:sr@:ts=\E[?%dT:tc=ibm6153:
+jaixterm|IBM Kanji Aixterm Terminal Eemulator:\
+ :ac@:tc=aixterm:
+jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator:\
+ :ac@:tc=aixterm-m:
+
+# This flavor is adapted from xterm, in turn from aixterm documentation -TD
+aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors:\
+ :tc=ibm+16color:tc=aixterm:
+
+#### Infoton/General Terminal Corp.
+#
+
+# gt100 sounds like something DEC would come out with. Let's hope they don't.
+i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100):\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\Ef%r%+ %+ :cr=^M:\
+ :dl=\EM:do=^J:ho=\EH:le=^H:nd=\EC:se=\Ea:sf=^J:so=\Eb:up=\EA:\
+ :vb=\Eb\Ea:
+i400|infoton 400:\
+ :am:bs:\
+ :co#80:li#25:\
+ :al=\E[L:bl=^G:ce=\E[N:cl=\E[2J:cm=\E[%i%3;%3H:cr=^M:\
+ :dc=\E[4h\E[2Q\E[P\E[4l\E[0Q:dl=\E[M:do=^J:\
+ :ei=\E[4l\E[0Q:im=\E[4h\E[2Q:le=^H:nd=\E[C:sf=^J:up=\E[A:
+# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
+addrinfo:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cd=^K:cl=^L:cm=\037%.%.:cr=^M:do=^J:ho=^H:le=^Z:\
+ :ll=^H^\:nd=^Y:sf=^J:up=^\:
+# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
+infoton:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cd=^K:cl=^L:cr=^M:do=^J:le=^Z:ll=^H^\:nd=^Y:sf=^J:\
+ :up=^\:
+
+# The ICL6402 was actually the Kokusai Display System 6402.
+# The 6404 was the KDS7372 (color version of the 6402).
+#
+# ICL6404 control codes follow:
+#
+#code function
+#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#ctrl-A set SOM position at cursor position
+#ctrl-G Bell
+#ctrl-H Backspace
+#ctrl-I Horiz tab
+#ctrl-J Linefeed
+#ctrl-K Cursor up
+#ctrl-L Cursor right
+#ctrl-M Carriage return
+#ctrl-N Disable xon/xoff to host
+#ctrl-O Enable xon/xoff to host
+#ctrl-R Enable bidirectional mode
+#ctrl-T Disable bidirectional mode
+#ctrl-V Cursor down
+#ctrl-Z Clear unprotected data to insert char
+#ctrl-^ Cursor home
+#ctrl-_ Newline
+#
+#ESC lead-in char for multiple character command
+#
+#ESC space R execute power on sequence
+#ESC ! p1 p2 define scroll region:
+# p1 = scroll top line: 20h - 37h
+# p1 = scroll bottom line: 20h - 37h
+#ESC " unlock keyboard
+#ESC # lock keyboard
+#ESC $ Semi-graphics mode on
+#ESC % Semi-graphics mode off
+#ESC & protect mode on
+#ESC ' protect mode off
+#ESC ( write protect mode off (full intensity)
+#ESC ) write protect mode on (half intensity)
+#
+#ESC * clear screen
+#ESC + clear unprotected data to insert char
+#ESC , clear unprotected data to half intensity spaces
+#ESC - p1 p2 p3 p4 address cursor to page, row, column:
+# p1 = page number 0 - 3
+# p2 = row 20h - 7fh
+# p3 = column (lo) 20h - 7fh
+# p4 = column (hi) 20h - 21h (only 132 col)
+#ESC . p1 set cursor style:
+# p1 = 0 invisible cursor
+# p1 = 1 block blinking cursor
+# p1 = 2 block steady cursor
+# p1 = 3 underline blinking cursor
+# p1 = 4 underline steady cursor
+#ESC / transmit cursor location (page, row, column)
+#ESC 0 p1 p2 p3 p4 program edit key:
+# p1 = edit key code: '@'-'S', '`'-'s'
+# p2 p3 p4 = program data (3 bytes)
+#
+#ESC 1 set tab
+#ESC 2 clear tab at cursor
+#ESC 3 clear all tabs
+#ESC 4 send unprotect line to cursor
+#ESC 5 send unprotect page to cursor
+#ESC 6 send line to cursor
+#ESC 7 send page to cursor
+#ESC 8 n set scroll mode:
+# n = 0 set jump scroll
+# n = 1 set smooth scroll
+#ESC 9 n control display:
+# n = 0 display off
+# n = 1 display on
+#ESC : clear unprotected data to null
+#ESC ; clear unprotected data to insert char
+#
+#ESC < keyclick on
+#ESC = p1 p2 address cursor to row, column
+# p1 = row 20h - 7fh
+# p2 = column (lo) 20h - 7fh
+# p3 = column (hi) 20h - 21h (only 132 col)
+#ESC > keyclick off
+#ESC ? transmit cursor location (row, column)
+#
+#ESC @ copy print mode on
+#ESC A copy print mode off
+#ESC B block mode on
+#ESC C block mode off (conversation mode)
+#ESC D F set full duplex
+#ESC D H set half duplex
+#ESC E line insert
+#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
+# 0 = black, 1 = red, 2 = green, 3 = yellow
+# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
+#ESC G n set serial field attribute (n = 30h - 3Fh)
+#ESC H n full graphics mode:
+# n = 0 exit full graphics mode
+# n = 1 enter full graphics mode
+#ESC I back tab
+#ESC J back page
+#ESC K forward page
+#
+#ESC L unformatted page print
+#ESC M L move window left (132 col mode only)
+#ESC M R move window right (132 col mode only)
+#ESC N set page edit (clear line edit)
+#ESC O set line edit (clear page edit)
+#ESC P formatted page print
+#ESC Q character insert
+#ESC R line delete
+#ESC S send message unprotected only
+#ESC T erase line to insert char
+#ESC U set monitor mode (see ESC X, ESC u)
+#
+#ESC V n select video attribute mode:
+# n = 0 serial field attribute mode
+# n = 1 parallel character attribute mode
+#ESC V 2 n define line attribute:
+# n = 0 single width single height
+# n = 1 single width double height
+# n = 2 double width single height
+# n = 3 double width double height
+#ESC V 3 n select character font:
+# n = 0 system font
+# n = 1 user defined font
+#ESC V 4 n select screen mode:
+# n = 0 page screen mode
+# n = 1 virtual screen mode
+#ESC V 5 n control mouse mode:
+# n = 0 disable mouse
+# n = 1 enable sample mode
+# n = 2 send mouse information
+# n = 3 enable request mode
+#ESC W character delete
+#ESC X clear monitor mode (see ESC U, ESC u)
+#ESC Y erase page to insert char
+#
+#ESC Z n send user/status line:
+# n = 0 send user line
+# n = 1 send status line
+# n = 2 send terminal ID
+#ESC [ p1 p2 p3 set character attribute (parallel char mode):
+# p1: 0 = normal
+# 1 = blank
+# 2 = blink
+# 3 = blink blank (= blank)
+# 4 = reverse
+# 5 = reverse blank
+# 6 = reverse blink
+# 7 = reverse blink blank (= reverse blank)
+# 8 = underline
+# 9 = underline blank
+# : = underline blink
+# ; = underline blink blank
+# < = reverse underline
+# = = reverse underline blank
+# > = reverse underline blink
+# ? = reverse underline blink blank
+# p2, p3: f/grnd, b/grnd colour
+# (see ESC F for colours)
+# use ZZ for mono, eg.
+# ESC [ 0 Z Z for normal
+# ESC [ 4 Z Z for inverse etc.
+#
+#ESC \ n set page size:
+# n = 1 24 lines/page
+# n = 2 48 lines/page
+# n = 3 72 lines/page
+# n = 4 96 lines/page
+#ESC ] n set Wordstar mode:
+# n = 0 normal (KDS7372) mode
+# n = 1 Wordstar mode
+#
+#ESC b set foreground colour screen
+#
+#ESC c n enter self-test mode:
+# n = 0 exit self test mode
+# n = 1 ROM test
+# n = 2 RAM test
+# n = 3 NVRAM test
+# n = 4 screen display test
+# n = 5 main/printer port test
+# n = 6 mouse port test
+# n = 7 graphics board test
+# n = 8 graphics memory test
+# n = 9 display all 'E'
+# n = : display all 'H'
+#ESC d set background colour screen
+#
+#ESC e n program insert char (n = insert char)
+#ESC f text CR load user status line with 'text'
+#
+#ESC g display user status line on 25th line
+#ESC h display system status line on 25th line
+#ESC i tab
+#ESC j reverse linefeed
+#ESC k n duplex/local edit mode:
+# n = 0 duplex edit mode
+# n = 1 local edit mode
+#ESC l n select virtual screen:
+# n = 0 screen 1
+# n = 1 screen 2
+#ESC m save current config to NVRAM
+#ESC n p1 select display screen:
+# p1 = 0 screen 1
+# p1 = 1 screen 2
+# p1 = 2 screen 3
+# p1 = 3 screen 4
+#ESC o p1 p2 set characters/line and attribute:
+# p1 = 0 80 chars/line
+#
+#ESC o p1 p2 set characters/line and attribute:
+# p1 = 0 80 chars/line
+# p1 = 1 132 chars/line
+# p2 = 0 single width single height
+# p2 = 1 single width double height
+# p2 = 2 double width single height
+# p2 = 3 double width double height
+#
+#ESC q insert mode on
+#ESC r edit mode on
+#ESC s send message all
+#ESC t erase line to null
+#ESC u clear monitor mode (see ESC U, ESC X)
+#ESC v autopage mode on
+#ESC w autopage mode off
+#ESC x p1 p2 p3 define delimiter code...
+#ESC y erase page to null
+#
+#ESC z 2 p1 p2 p3 p4 draw quadrangle:
+# p1 = starting row
+# p2 = starting column
+# p3 = end row
+# p4 = end column
+#
+#ESC { p1 p2 p3 p4 configure main port
+# (baud, stop bits, parity, word length)
+#
+#ESC | p1 p2 text Ctrl-Y program function key with 'text':
+# p1 = function key code:
+# '1' - ';' normal f1- f11
+# '<' - 'F' shifted f1 - f11
+# p2 = program mode:
+# 1 = FDX
+# 2 = LOC
+# 3 = HDX
+# Ctrl-Y = terminator
+# (use Ctrl-P to escape ^P, ^Y )
+#
+#ESC } p1 p2 p3 p4 configure printer port
+# (baud, stop bits, parity, word length)
+#ESC ~ send system status
+#
+# Codes and info from Peter Disdale <[email protected]> 12 May 1997
+#
+# Entry is by esr going solely on above information and is UNTESTED.
+# This actually looks a lot like a Televideo 9xx.
+# This entry uses page 0 and is monochrome; I'm not brave enough to try
+# to make color work without a test terminal. The :am: capability is a guess.
+# The initialization string sets conversation mode, blinking underline cursor,
+# full duplex, parallel attribute mode, display user status line, white
+# foreground, black background, normal highlight.
+#
+icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372:\
+ :am:bs:hs:\
+ :co#80:li#24:\
+ :al=\EE:bl=^G:bt=\EI:cl=\E*:cm=\E=%+ %+P%+P:cr=^M:ct=\E3:\
+ :dc=\EW:dl=\ER:ei=\Er:ho=^^:i1=\EC\E.3\EDF\EV1\Eg\E[0ZZ:\
+ :im=\Eq:mb=\E[2ZZ:me=\E[0ZZ:mk=\E[1ZZ:mr=\E[4ZZ:nd=^L:\
+ :nw=^_:rs=\Eo1:se=\E[%gh%{4}%^%Ph%gh%dZZ:so=\E[8ZZ:\
+ :st=\E1:ta=^I:ue=\E[%gh%{8}%^%Ph%gh%dZZ:up=^K:us=\E[8ZZ:\
+ :ve=\E.3:vi=\E.0:vs=\E.1:
+icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols:\
+ :rs=\Eo1:tc=icl6404:
+
+#### Interactive Systems Corp
+#
+# ISC used to sell OEMed and customized hardware to support ISC UNIX.
+# ISC UNIX still exists in 1995, but ISC itself is no more; they got
+# bought out by Sun.
+#
+
+# From: <cithep!eric> Wed Sep 16 08:06:44 1981
+# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
+# ":le=^_:" later overridden -- esr)
+intext|Interactive Systems Corporation modified owl 1200:\
+ :am:bs:\
+ :co#80:it#8:li#24:sg#1:\
+ :al=5.5*\020:bl=^G:bt=^Y:cd=5.5*\026J:ce=^Kp^R:cl=132\014:\
+ :cm=\017%+ %+ :cr=^M:dc=5.5*\022:dl=5.5*\021:do=^J:ei=^V<:\
+ :im=^V;:ip=5.5*:k0=^VJ\r:k1=^VA\r:k2=^VB\r:k3=^VC\r:\
+ :k4=^VD\r:k5=^VE\r:k6=^VF\r:k7=^VG\r:k8=^VH\r:k9=^VI\r:\
+ :kb=^H:kd=^J:ke=^V9:kh=^Z:kl=^_:kr=^^:\
+ :ks=\036\072\264\026%%:ku=^\:le=^H:nd=^^:se=^V#\040:sf=^J:\
+ :so=^V$,:ta=^I:up=^\:
+intext2|intextii|INTERACTIVE modified owl 1251:\
+ :am:bw:ul:\
+ :co#80:li#24:sg#0:ug#0:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ei=:ic=\E[@:im=:k0=\E@\r:k1=\EP\r:k2=\EQ\r:\
+ :k3=\ES\r:k4=\ET\r:k5=\EU\r:k6=\EV\r:k7=\EW\r:k8=\EX\r:\
+ :k9=\EY\r:kb=^H:kd=\EB\r:kh=\ER\r:kl=\ED\r:kr=\EC\r:\
+ :ku=\EA\r:l0=REFRSH:l1=DEL CH:l2=TABSET:l3=GOTO:l4=+PAGE:\
+ :l5=+SRCH:l6=-PAGE:l7=-SRCH:l8=LEFT:l9=RIGHT:le=\E[D:\
+ :nd=\E[C:se=\E[2 D:sf=\E[S:so=\E[6 D:sr=\E[T:ta=^I:\
+ :ue=\E[2 D:up=\E[A:us=\E[18 D:\
+ :vb=\E[;;;;;;;;;2;;u\E[;;;;;;;;;1;;u:
+
+#### Kimtron (abm, kt)
+#
+# Kimtron seems to be history, but as March 1998 these people are still
+# offering repair services for Kimtron equipment:
+#
+# Com/Pair Monitor Service
+# 1105 N. Cliff Ave.
+# Sioux Falls, South Dakota 57103
+#
+# WATS voice: 1-800/398-4946
+# POTS fax: +1 605/338-8709
+# POTS voice: +1 605/338-9650
+# Email: <[email protected]>
+# Internet/Web: <http://www.com-pair.com>
+#
+# Kimtron entries include (undocumented) codes for: enter dim mode,
+# enter bold mode, enter reverse mode, turn off all attributes.
+#
+
+# Kimtron ABM 85 added by Dual Systems
+# (abm85: removed duplicated ":kd=^J:" -- esr)
+abm85|Kimtron ABM 85:\
+ :am:bs:bw:ms:\
+ :co#80:it#8:li#24:sg#1:ug#1:\
+ :al=\EE:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :dc=\EW:\
+ :dl=\ER:do=^J:ei=\Er:if=/usr/share/tabset/stdcrt:im=\EQ:\
+ :is=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq:kb=^H:kd=^J:kh=^^:\
+ :kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\Ek:so=\Ej:ta=^I:ue=\Em:\
+ :up=^K:us=\El:
+# Kimtron ABM 85H added by Dual Systems.
+# Some notes about the abm85h entries:
+# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
+# firmware revs prior to SP51
+# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
+# abm85e entry if it is in tvi920 emulation mode. They are incompatible
+# in some places and NOT software settable i.e., :is: can't fix it)
+# 3) In 85h mode, the arrow keys and special functions transmit when
+# the terminal is in dup-edit, and work only locally in local-edit.
+# Vi won't swallow `del char' for instance, but :ti: turns on
+# dup-edit anyway so that the arrow keys will work right. If the
+# arrow keys don't work the way you like, change :ti:, :te:, and
+# :is:. Note that 920E mode does not have software commands to toggle
+# between dup and local edit, so you get whatever was set last on the
+# terminal.
+# 4) :vb: attribute is nice, but seems too slow to work correctly
+# (\Eb:pc:\Ed)
+# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
+# are selected, the <xmc@> entry should be removed.
+# 6) auto new-line should be on (selectable from setup mode only)
+#
+# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
+abm85h|Kimtron ABM 85H native mode:\
+ :hs:\
+ :sg@:\
+ :bl=^G:ds=\Ee:fs=^M:im=\EZ:\
+ :is=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El:\
+ :kd=^V:me=\E(\EG0:mh=\E):mk@:ts=\Eg\Ef:vb@:ve=\E.4:vs=\E.2:\
+ :tc=adm+sgr:tc=abm85:
+abm85e|Kimtron ABM 85H in 920E mode:\
+ :sg@:\
+ :bl=^G:im=\EZ:\
+ :is=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em:\
+ :me=\E(\Ek:mh=\E):mr=\Ej:vb@:tc=abm85:
+abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.:\
+ :sg@:\
+ :bl=^G:im=\EZ:\
+ :is=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF:\
+ :me=\E(\Ek:mh=\E):mr=\Ej:tc=abm85:
+# From: <[email protected]>
+# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
+kt7|kimtron model kt-7:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :al=\EE:bt=\EI:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=\EW:\
+ :dl=\ER:do=^V:ei=:fs=\Eg:ho=^^:ic=\EQ:\
+ :if=/usr/share/tabset/stdcrt:im=:is=\El\E":k0=^AI\r:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kA=\EE:kB=\EI:kC=^Z:kD=\EW:\
+ :kE=\ET:kI=\EQ:kL=\ER:kS=\EY:kb=^H:kd=^V:kh=^^:kl=^H:kr=^L:\
+ :ku=^K:le=^H:mk@:nd=^L:ta=^I:ts=\Ef:up=^K:tc=adm+sgr:
+# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
+# other kt7 entry and the adjacent key capabilities). Removed EE which is
+# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
+# but we can't figure out what.
+kt7ix|kimtron model kt-7 or 70 in IX mode:\
+ :am:bw:\
+ :co#80:it#8:li#25:\
+ :@7=\EY:PU=\EK:ac=jYk?lZm@nEqDt4uCvAwBx3:ae=\E%%:al=\EE:\
+ :as=\E$:bl=^G:bt=\EI:cd=\EY:ce=\ET:cl=\E*:cm=\E=%+ %+ :\
+ :cr=^M:dc=\EW:dl=\ER:do=^V:ds=\Ef\r:ei=:fs=^M:ho=^^:ic=\EQ:\
+ :im=:is=\EG0\E s\017\E~:k0=^AI\r:k1=^A@\r:k2=^AA\r:\
+ :k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:\
+ :k9=^AH\r:kA=\EE:kB=\EI:kC=\E*:kE=\ET:kI=\EQ:kL=\ER:kN=\EJ:\
+ :kS=\EY:kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\EG2:me=\EG0:mh=\EG@:nd=^L:nw=^M^J:se=\EG0:sf=^J:\
+ :so=\EG4:ta=^I:ts=\Ef:ue=\EG0:up=^K:us=\EG8:ve=\E.3:vi=\E.0:
+
+#### Microdata/MDIS
+#
+# This was a line of terminals made by McDonnell-Douglas Information Systems.
+# These entries come direct from MDIS documentation. I have edited them only
+# to move primary names of the form p[0-9] * to aliases, and to comment out
+# :ae:/:as: in a couple of entries without <acsc> strings. I have
+# also removed the change history; the last version indicates this is
+# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
+#
+
+# McDonnell Information Systems Terminal Family History
+# =========================================
+#
+# Prism-1, Prism-2 and P99:
+# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
+#
+# Prism-4 and Prism-5:
+# Slightly less ancient range of Microdata terminals. Follow-on from
+# Prism-2, but with many enhancements. P5 has eight display pages.
+#
+# Prism-6:
+# A special terminal for use with library systems, primarily in Germany.
+# Limited numbers. Similar functionality to P5 (except attributes?).
+#
+# Prism-7, Prism-8 and Prism-9:
+# More recent range of MDIS terminals, in which P7 and P8
+# replace the P4 & P5, with added functionality, and P9 is the flagship.
+# The P9 has two emulation modes - P8 and ANSI - and includes a
+# large number of the DEC VT220 control sequences. Both
+# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
+#
+# Prism-12 and Prism-14:
+# Latest range, functionally very similar to the P9. The P14 has a
+# black-on-white overscanning screen.
+#
+# The terminfo definitions given here are:
+#
+# p2 - Prism-2 (or Prism-1 or P99).
+#
+# p4 - Prism-4 (and older P7s & P8s).
+# p5 - Prism-5 (or Prism-6).
+#
+# p7 - Prism-7.
+# p8 - Prism-8 (in national or multinational mode).
+# p8-w - 132 column version of p8.
+# p9 - Prism-9 in ANSI mode.
+# p9-w - 132 column version of p9.
+# p9-8 - Prism-9 in Prism-8 emulation mode.
+# p9-8-w - As p9-8, but with 132 columns.
+#
+# p12 - Prism-12 in ANSI mode.
+# p12-w - 132 column version of p12.
+# p12-m - Prism-12 in MDC emulation mode.
+# p12-m-w - As p12-m, but with 132 columns.
+# p14 - Prism-14 in ANSI mode.
+# p14-w - 132 column version of p14.
+# p14-m - Prism-14 in MDC emulation mode.
+# p14-m-w - As p14-m, but with 132 columns.
+#
+# p2: Prism-2
+# -----------
+#
+# Includes Prism-1 and basic P99 without SP or MP loaded.
+# The simplest form of Prism-type terminal.
+# Basic cursor movement and clearing operations only.
+# No video attributes.
+# Notes:
+# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+# value up, followed by backspace.
+#
+prism2|MDC Prism-2:\
+ :am:bw:ms:\
+ :co#80:li#24:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=20\014:cr=^M:cv=\013%+ :do=^J:ho=^A:\
+ :kb=^H:kh=^A:le=^H:nd=^F:sf=^J:up=^Z:
+
+# p4: Prism-4
+# -----------
+#
+# Includes early versions of P7 & P8.
+# Basic family definition for most Prisms (except P2 and P9 ANSI).
+# Notes:
+# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+# value up, followed by backspace.
+# Cursor key definitions removed because they interfere with vi and csh keys.
+#
+prism4|p4|P4|MDC Prism-4:\
+ :5i:am:bw:hs:ms:\
+ :co#80:li#24:sg#1:ug#1:ws#72:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=20\014:cr=^M:cv=\013%+ :do=^J:\
+ :ds=\035\343\035\345:fs=^]\345:ho=^A:kb=^H:kh=^A:le=^H:\
+ :mb=^CB:me=^C\040:mh=^CA:mk=^CH:mr=^CD:nd=^F:pf=\ET:po=\ER:\
+ :ps=\EU:se=^C\040:sf=^J:so=^CD:ts=^]\343:ue=^C\040:up=^Z:\
+ :us=^CP:ve=^]\342:vi=^]\344:
+
+# p5: Prism-5
+# -----------
+#
+# Same definition as p4. Includes Prism-6 (not tested!).
+# Does not use any multi-page features.
+#
+prism5|p5|P5|MDC Prism-5:\
+ :tc=p4:
+
+# p7: Prism-7
+# -----------
+#
+# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
+# Notes:
+# Use p4 for very early models of P7.
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism7|p7|P7|MDC Prism-7:\
+ :ch@:cm=\E[%i%d;%dH:cv@:tc=p4:
+
+# p8: Prism-8
+# -----------
+#
+# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
+# Supports national and multinational character sets.
+# Notes:
+# Alternate char set operations only work in multinational mode.
+# Use p4 for very early models of P8.
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+# (esr: commented out :as:/:ae: because there's no <acsc>)
+#
+prism8|p8|P8|MDC Prism-8:\
+ :ch=\E[%i%d`:cm=\E[%i%d;%dH:cv=\E[%i%dd:is=\E[<12h:tc=p4:
+
+# p8-w: Prism-8 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p8.
+# Notes:
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode:\
+ :co#132:\
+ :is=\E[<12h\E[<14h:tc=p8:
+
+# p9: Prism-9 in ANSI mode
+# -------------------------
+#
+# The "flagship" model of this generation of terminals.
+# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
+# Notes:
+# Tabs only reset by "reset". Otherwise assumes default (8 cols).
+# Fixes to deal with terminal firmware bugs:
+# . 'ri' uses insert-line since rev index doesn't always
+# . 'sgr0' has extra '0' since esc[m fails
+# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
+# Not covered in the current definition:
+# . Labels
+# . Programming Fn keys
+# . Graphic characters (defaults correctly to vt100)
+# . Padding values (sets xon)
+# (esr: commented out :as:/:ae: because there's no <acsc>)
+#
+prism9|p9|P9|MDC Prism-9 in ANSII mode:\
+ :5i:am:bw:hs:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:ws#72:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:F1=\E[23~:\
+ :F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:F6=\E[29~:\
+ :F7=\E[31~:F8=\E[32~:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:\
+ :al=\E[L:bl=^G:bt=\E[Z:cd=10\E[J:ce=\E[K:ch=\E[%i%d`:cl=^L:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%d%%v:ct=\E[3g:\
+ :cv=\E[%i%dd:dc=\E[P:dl=\E[M:do=^J:ds=\E[%}\024:ec=\E[%dX:\
+ :ei=\E[4l:fs=^T:ho=\E[H:im=\E[4h:is=\E[&p\E[<12l\E F:\
+ :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kC=^L:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m\017:mp=\E[32%{:mr=\E[7m:\
+ :nd=\E[C:nw=^M^J:pf=\E[4i:po=\E[5i:ps=\E[i:rc=\E[%z:\
+ :rp=\E[%r%db%.:\
+ :rs=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N:\
+ :sc=\E[%y:se=\E[27m:sf=^J:so=\E[7m:sr=\E[L:st=\EH:ta=^I:\
+ :ts=\E[%i%d%%}:ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[<4h:\
+ :vi=\E[<4l:
+
+# p9-w: Prism-9 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p9.
+#
+prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode:\
+ :co#132:\
+ :is=\E[&p\E[<12l\E F\E[<14h:\
+ :rs=\E[&p\E[<12l\E F\E[<14h:tc=p9:
+
+# p9-8: Prism-9 in P8 mode
+# ------------------------
+#
+# P9 terminal in P8 emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:dc=\E[P:\
+ :dl=\E[M:ei=:ic=\E[@:im=:tc=p8:
+
+# p9-8-w: Prism-9 in P8 and 132 column modes
+# ------------------------------------------
+#
+# P9 terminal in P8 emulation mode and 132 column mode.
+#
+prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:al=\E[L:dc=\E[P:\
+ :dl=\E[M:ei=:ic=\E[@:im=:tc=p8-w:
+
+# p12: Prism-12 in ANSI mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism12|p12|P12|MDC Prism-12 in ANSI mode:\
+ :tc=p9:
+
+# p12-w: Prism-12 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p12.
+#
+prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode:\
+ :tc=p9-w:
+
+# p12-m: Prism-12 in MDC emulation mode
+# -------------------------------------
+#
+# P12 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode:\
+ :tc=p9-8:
+
+# p12-m-w: Prism-12 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P12 terminal in MDC emulation mode and 132 column mode.
+#
+prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode:\
+ :tc=p9-8-w:
+
+# p14: Prism-14 in ANSII mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism14|p14|P14|MDC Prism-14 in ANSII mode:\
+ :tc=p9:
+
+# p14-w: Prism-14 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p14.
+#
+prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode:\
+ :tc=p9-w:
+
+# p14-m: Prism-14 in MDC emulation mode
+# -------------------------------------
+#
+# P14 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode:\
+ :tc=p9-8:
+
+# p14-m-w: Prism-14 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P14 terminal in MDC emulation mode and 132 column mode.
+#
+prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode:\
+ :tc=p9-8-w:
+
+# End of McDonnell Information Systems Prism definitions
+
+# These things were popular in the Pick database community at one time
+# From: George Land <[email protected]> 24 Sep 1996
+p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition:\
+ :am:bw:hs:mi:\
+ :co#80:li#24:ma#1:sg#1:ug#1:ws#78:\
+ :F2=^AJ\r:F3=^AK\r:F4=^AL\r:F5=^AM\r:F6=^AN\r:F7=^AO\r:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\E[%i%d;%dH:cr=^M:dc=\040^H:\
+ :dl=^P:do=^J:ho=^A:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:\
+ :k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:\
+ :kD=\040^H:kE=\EK:kL=^P:kS=\EJ:kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:\
+ :ku=^Z:l1=F1:l2=F2:l3=F3:l4=F4:l5=F5:l6=F6:l7=F7:l8=F8:l9=F9:\
+ :la=F10:le=^U:mb=^CB:me=^C\040:mh=^CA:mk=^CH:mr=^CD:nd=^F:\
+ :nw=^J^M:pc=\200:se=^C\040:sf=^J:so=^CE:ue=^C\040:up=^Z:\
+ :us=^C0:
+
+#### Microterm (act, mime)
+#
+# The mime1 entries refer to the Microterm Mime I or Mime II.
+# The default mime is assumed to be in enhanced act iv mode.
+#
+
+# New "safe" cursor movement (5/87) from <[email protected]>. Prevents
+# freakout with out-of-range args on Sytek multiplexors. No :so=^N: and
+# :se=^N: since it gets confused and it's too dim anyway. No :ic:
+# since Sytek insists ^S means xoff.
+# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
+act4|microterm|microterm act iv:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=2.3*\001<2.3*/>:bl=^G:cd=2.2*\037:ce=.1*\036:\
+ :cl=12\014:cm=\024%+^X%>/0%+P:cr=^M:dc=.1*\004:\
+ :dl=2.3*\027:do=^K:ho=^]:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:\
+ :sf=^J:up=^Z:
+# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
+# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
+# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
+act5|microterm5|microterm act v:\
+ :kd=^K:kl=^H:kr=^X:ku=^Z:sr=3\EH:uc=^H\EA:tc=act4:
+# Mimes using brightness for standout. Half bright is really dim unless
+# you turn up the brightness so far that lines show up on the screen.
+mime-fb|full bright mime1:\
+ :is=^S\E:se=^S:so=^Y:tc=mime:
+mime-hb|half bright mime1:\
+ :is=^Y\E:se=^Y:so=^S:tc=mime:
+# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
+# the more plausible ":do=^J:" -- esr)
+# uc was at one time disabled to get around a curses bug, be wary of it
+mime|mime1|mime2|mimei|mimeii|microterm mime1:\
+ :am:bs:\
+ :co#80:it#8:li#24:vt#9:\
+ :al=80\001:bl=^G:cd=^_:ce=^^:cl=^]^C:cm=\024%+^X%> 0%+P:\
+ :cr=^M:dl=80\027:do=^J:ho=^]:is=^S\E^Q:kd=^K:kl=^H:kr=^X:\
+ :ku=^Z:le=^H:nd=^X:sf=^J:sr=3\022:ta=2\011:uc=^U:up=^Z:
+# These termcaps (for mime2a) put the terminal in low intensity mode
+# since high intensity mode is so obnoxious.
+mime2a-s|microterm mime2a (emulating an enhanced soroc iq120):\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=20*\001:bl=^G:cd=20*\EJ:ce=\EK:cl=\EL:cm=\E=%+ %+ :\
+ :cr=^M:dc=\ED:dl=20*\027:do=^J:ei=^Z:ho=^^:im=\EE:ip=2:\
+ :is=\E):kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:se=\E;:sf=^J:\
+ :so=\E\072:sr=\EI:ue=\E7:up=\EI:us=\E6:
+# This is the preferred mode (but ^X can't be used as a kill character)
+mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52):\
+ :bs:\
+ :co#80:it#8:li#24:\
+ :al=20*\001:bl=^G:cd=20*\EQ:ce=\EP:cl=\EL:cm=\EY%+ %+ :\
+ :cr=^M:dc=^N:dl=20*\027:do=^J:ei=^Z:ho=\EH:im=^O:ip=2:is=^Y:\
+ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\E9:sf=^J:\
+ :so=\E8:sr=\EA:ta=^I:ue=\E5:up=\EA:us=\E4:
+# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
+mime3a|mime1 emulating 3a:\
+ :am@:\
+ :kd=^K:kl=^H:kr=^X:ku=^Z:tc=adm3a:
+mime3ax|mime-3ax|mime1 emulating enhanced 3a:\
+ :it#8:\
+ :al=80\001:cd=^_:ce=^X:dl=80\027:ta=3\011:tc=mime3a:
+# Wed Mar 9 18:53:21 1983
+# We run our terminals at 2400 baud, so there might be some timing problems at
+# higher speeds. The major improvements in this model are the terminal now
+# scrolls down and insert mode works without redrawing the rest of the line
+# to the right of the cursor. This is done with a bit of a kludge using the
+# exit graphics mode to get out of insert, but it does not appear to hurt
+# anything when using vi at least. If you have some users using act4s with
+# programs that use curses and graphics mode this could be a problem.
+mime314|mm314|mime 314:\
+ :am:\
+ :co#80:li#24:\
+ :al=^A:cd=^_:ce=^^:cl=^L:cm=\024%.%.:dc=^D:dl=^W:ei=^V:ho=^]:\
+ :im=^S:kd=^K:kl=^H:kr=^X:ku=^Z:le=^H:nd=^X:ta=^I:up=^Z:
+# Microterm mime 340 from University of Wisconsin
+mm340|mime340|mime 340:\
+ :co#80:li#24:\
+ :al=46\EU:cd=2*\037:ce=2.1\EL:cl=12\032:cm=\E=%+ %+ :\
+ :cr=^M:dc=2.1*\E#:dl=49.6\EV:do=^J:is=\E,:kb=^H:kd=^J:kl=^H:\
+ :ku=^K:le=^H:nd=^L:nw=^M^J:sf=^J:ta=^I:up=^K:
+# This came from University of Wisconsin marked "astro termcap for jooss".
+# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
+# also added <rmam>/<smam> based on the init string -- esr)
+mt4520-rv|micro-term 4520 reverse video:\
+ :am:hs:ms:xn:xo:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\
+ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[g:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
+ :fs=\E[?5l\E[?5h:ho=\E[H:ic=\E[@:im=:\
+ :is=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;1H:me=\E[m:\
+ :nd=\E[C:nw=\EE:\
+ :r1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J:\
+ :rc=\E8:rf=/usr/share/tabset/vt100:sc=\E7:se=\E[0m:\
+ :sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[25;1H:ue=\E[24m:\
+ :up=\E[A:us=\E[4m:vb=\E[?5l\E[?5h:ve=\E[0V\E8:\
+ :vs=\E7\E[0U:
+
+# Fri Aug 5 08:11:57 1983
+# This entry works for the ergo 4000 with the following setups:
+# ansi,wraparound,newline disabled, xon/xoff disabled in both
+# setup a & c.
+#
+# WARNING!!! There are multiple versions of ERGO 4000 microcode
+# Be advised that very early versions DO NOT WORK RIGHT !!
+# Microterm does have a ROM exchange program- use it or lose big
+# (ergo400: added <rmam>/<smam> based on the init string -- esr)
+ergo4000|microterm ergo 4000:\
+ :da:db:ms:\
+ :co#80:li#66:\
+ :RA=\E[?7l:SA=\E[?7m:al=5*\E[1L:bl=^G:cd=15\E[0J:\
+ :ce=13\E[0K:cl=80\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :dc=80\E[1P:dl=5*\E[1M:do=\E[B:ei=\E[4l:im=6\E[4h:\
+ :is=300\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=4\E=:kl=\E[D:kr=\E[C:\
+ :ks=4\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:\
+ :me=20\E[m:nd=\E[C:se=20\E[m:sf=20*\ED:so=20\E[7m:\
+ :sr=20*\EM:ta=^I:up=\E[A:
+
+#### NCR
+#
+# NCR's terminal group was merged with AT&T's when AT&T bought the company.
+# For what happened to that group, see the ADDS section.
+#
+# There is an NCR4103 terminal that's just a re-badged Wyse-50.
+#
+
+# The following vendor-supplied termcaps were captured from the Boundless
+# Technologies site, 8 March 1998. I removed all-upper-case names that were
+# identical, except for case, to lower-case ones. I also uncommented the acsc
+# capabilities.X
+#
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300an:
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300wan:
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300pp:
+# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# DEC vt200/300 with color capabilities added.
+ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode:\
+ :Co#8:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:tc=ncr260vt300wpp:
+# This definition for ViewPoint supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260vppp|NCR 2900_260 viewpoint:\
+ :am:bw:hs:km:mi:ms:xo:\
+ :co#80:li#24:sg#1:ug#1:\
+ :K1=^A:K3=\EJ:K4=\ET:K5=\EJ:al=2\EM:bl=^G:bt=\EI:cd=2\Ek:\
+ :ce=2\EK:cl=40\014:cm=5\EY%+ %+ :cr=2\r:dc=2\EW:dl=2\El:\
+ :do=2\n:ds=\E`c:ei=\Er:fs=^M:ho=2\036:im=\Eq:\
+ :is=100\Ee6\E~%\E+\E`\072\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
+ :k1=^B1\r:k2=^B2\r:k3=^B3\r:k4=^B4\r:k5=^B5\r:k6=^B6\r:\
+ :k7=^B7\r:k8=^B8\r:k9=^B9\r:kD=\EW:kI=\Eq:kN=\EJ:kP=\EJ:\
+ :kb=^H:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=2\010:ll=5\001:\
+ :mb=\EG2:me=\EG0\EH\003:mh=\EGp:mr=\EG4:nd=2\006:nw=2\037:\
+ :rs=100\Ee6\E~%\E+\E`\072\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
+ :se=\EG0:sf=2\n:so=\EG4:sr=2\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
+ :up=2\032:us=\EG8:ve=\E`5:vi=\E`0:
+ncr260vpwpp|NCR 2900_260 viewpoint wide mode:\
+ :co#132:\
+ :cm=30\Ea%i%dR%dC:\
+ :is=100\Ee6\E~%\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
+ :rs=100\Ee6\E~%\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7:\
+ :tc=ncr260vppp:
+ncr260vt100an|NCR 2900_260 vt100 with ansi kybd:\
+ :am:hs:mi:ms:xn:xo:\
+ :Nl#32:co#80:li#24:\
+ :%0=\E[29~:%1=\E[28~:*6=\E[4~:@0=\E[1~:AL=5\E[%dL:\
+ :DC=5\E[%dP:DL=5\E[%dM:DO=5\E[%dB:IC=5\E[%d@:LE=5\E[%dD:\
+ :RI=5\E[%dC:SF=5\E[%dE:UP=5\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~:ae=^O:\
+ :al=5\E[L:as=^N:bl=^G:cb=3\E[1K:cd=5\E[0J:ce=3\E[0K:\
+ :ch=40\E[%dG:cl=20\E[2J\E[1;1H:cm=10\E[%i%d;%dH:cr=1\r:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:cv=40\E[%dd:dc=5\E[1P:dl=5\E[M:\
+ :do=5\E[B:ds=\E[0$~\E[1$~:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\
+ :ho=1\E[H:im=\E[4h:\
+ :is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:\
+ :le=5\E[D:mb=\E[5m:md=\E[1m:me=20\E[0m:mk=\E[8m:mr=\E[7m:\
+ :nd=5\E[C:nw=5\EE:rc=\E8:\
+ :rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :sc=\E7:se=\E[0m:sf=5\ED:so=\E[1;7m:sr=5\EM:st=\EH:ta=^I:\
+ :ts=\E[2$~\E[1$}:ue=\E[0m:up=5\E[A:us=\E[4m:ve=\E[?25h:\
+ :vi=\E[?25l:tc=vt220+keypad:
+ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd:\
+ :co#132:\
+ :cm=30\E[%i%d;%dH:\
+ :is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :tc=ncr260vt100an:
+ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd:\
+ :@7=\E[5~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:\
+ :is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :kD=\E[4~:kI=\E[1~:kN=\E[6~:kP=\E[3~:kd=\E[B:ke=\E>:\
+ :kh=\E[2~:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:\
+ :l3=pf3:l4=pf4:\
+ :rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :tc=ncr260vt100an:
+ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd:\
+ :co#132:\
+ :cm=30\E[%i%d;%dH:\
+ :is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :tc=ncr260vt100pp:
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260vt200an|NCR 2900_260 vt200 with ansi kybd:\
+ :am:hs:mi:ms:xn:xo:\
+ :co#80:li#24:\
+ :AL=5\E[%dL:DC=5\E[%dP:DL=5\E[%dM:DO=5\E[%dB:IC=5\E[%d@:\
+ :LE=5\E[%dD:RI=5\E[%dC:SF=5\E[%dE:UP=5\E[%dA:ae=20\017:\
+ :al=5\E[L:as=20\016:bl=^G:cd=\E[0J:ce=5\E[0K:\
+ :cl=20\E[2J\E[1;1H:cm=10\E[%i%d;%dH:cr=1\r:\
+ :cs=5\E[%i%d;%dr:ct=\E[3g:dc=5\E[1P:dl=5\E[M:do=5\E[B:\
+ :ds=\E[0$~\E[1$~:ec=5\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:\
+ :im=\E[4h:\
+ :is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :k0=\EOy:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[M:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:\
+ :kP=\E[5~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=5\E[D:mb=\E[5m:md=\E[1m:\
+ :me=20\E[0m:mr=\E[7m:nd=5\E[C:nw=\EE:rc=\E8:\
+ :rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :sc=\E7:se=\E[27m:sf=5\ED:so=\E[7m:sr=5\EM:st=\EH:ta=^I:\
+ :ts=\E[2$~\E[1$}:ue=\E[24m:up=5\E[A:us=\E[4m:ve=\E[?25h:\
+ :vi=\E[?25l:tc=vt220+keypad:
+ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd:\
+ :co#132:\
+ :cm=30\E[%i%d;%dH:\
+ :is=200\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H:\
+ :rs=200\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H:\
+ :tc=ncr260vt200an:
+ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd:\
+ :@7=\E[1~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:kD=\E[4~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
+ :tc=ncr260vt200an:
+ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd:\
+ :co#132:\
+ :cm=30\E[%i%d;%dH:\
+ :is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :tc=ncr260vt200pp:
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260vt300an|NCR 2900_260 vt300 with ansi kybd:\
+ :am:hs:mi:ms:xn:xo:\
+ :co#80:li#24:\
+ :AL=5\E[%dL:DC=5\E[%dP:DL=5\E[%dM:DO=5\E[%dB:IC=5\E[%d@:\
+ :LE=5\E[%dD:RI=5\E[%dC:SF=5\E[%dE:UP=5\E[%dA:ae=20\017:\
+ :al=5\E[L:as=20\016:bl=^G:cd=\E[0J:ce=5\E[0K:\
+ :cl=20\E[2J\E[1;1H:cm=10\E[%i%d;%dH:cr=1\r:\
+ :cs=5\E[%i%d;%dr:ct=\E[3g:dc=5\E[1P:dl=5\E[M:do=5\E[B:\
+ :ds=\E[0$~\E[1$~:ec=5\E[%dX:ei=\E[4l:fs=\E[0$}:ho=\E[H:\
+ :im=\E[4h:\
+ :is=200\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :k0=\EOy:k5=\E[M:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:\
+ :le=5\E[D:mb=\E[5m:md=\E[1m:me=20\E[0m:mr=\E[7m:nd=5\E[C:\
+ :nw=\EE:rc=\E8:\
+ :rs=200\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :sc=\E7:se=\E[27m:sf=5\ED:so=\E[7m:sr=5\EM:st=\EH:ta=^I:\
+ :ts=\E[2$~\E[1$}:ue=\E[24m:up=5\E[A:us=\E[4m:ve=\E[?25h:\
+ :vi=\E[?25l:tc=vt220+keypad:
+ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd:\
+ :co#132:\
+ :cm=30\E[%i%d;%dH:\
+ :is=200\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H:\
+ :rs=200\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H:\
+ :tc=ncr260vt300an:
+ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd:\
+ :@7=\E[1~:K1=\E[H:K2=\E[V:K3=\EOu:K5=\E[U:kD=\E[4~:\
+ :kI=\E[2~:kN=\E[6~:kP=\E[5~:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ks=\E=:ku=\E[A:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\
+ :tc=ncr260vt300an:
+NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd:\
+ :co#132:\
+ :cm=30\E[%i%d;%dH:\
+ :is=200\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :rs=200\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>:\
+ :tc=ncr260vt300pp:
+# This terminfo file contains color capabilities for the Wyse325 emulation of
+# the NCR 2900/260C color terminal. Because of the structure of the command
+# (escape sequence) used to set color attributes, one of the fore/background
+# colors must be preset to a given value. I have set the background color to
+# black. The user can change this setup by altering the last section of the
+# 'setf' definition. The escape sequence to set color attributes is
+# ESC d y <foreground_color> <background_color> 1
+# In addition, the background color can be changed through the desk accessories.
+# The capablitiy 'op' sets colors to green on black (default combination).
+#
+# NOTE: The NCR Unix System Administrator's Shell will not function properly
+# if the 'pairs' capability is defined. Un-Comment the 'pairs'
+# capability and recompile if you wish to have it included.
+#
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260wy325pp|NCR 2900_260 wyse 325:\
+ :am:bw:hs:km:mi:ms:xo:\
+ :co#80:li#24:\
+ :K1=^^:K2=\EJ:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=\EI:cd=5\Ey:\
+ :ce=5\Et:cl=10\E*:cm=10\E=%+ %+ :cr=^M:ct=\E0:dc=50\EW:\
+ :dl=5\ER:do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=5\036:im=\Eq:\
+ :is=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
+ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
+ :me=15\EG0\EcB0\EcD:mr=\EG4:nd=5\014:nw=5\037:\
+ :rs=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
+ :up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
+ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode:\
+ :co#132:\
+ :cm=30\Ea%i%dR%dC:\
+ :is=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :rs=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :tc=ncr260wy325pp:
+# This definition for Wyse 350 supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# In addition, color capabilities have been added to this file. The drawback,
+# however, is that the background color has to be black. The foreground colors
+# are numbered 0 through 15.
+#
+# NOTE: The NCR Unix System Administrator's Shell does not function properly
+# with the 'pairs' capability defined as below. If you wish to
+# have it included, Un-comment it and recompile (using 'tic').
+#
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260wy350pp|NCR 2900_260 wyse 350:\
+ :am:bw:hs:km:mi:ms:xo:\
+ :co#80:li#24:sg#1:ug#1:\
+ :K1=^^:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=\EI:cd=5\Ey:ce=5\Et:\
+ :cl=20\E+:cm=40\E=%+ %+ :cr=^M:ct=\E0:dc=50\EW:dl=5\ER:\
+ :do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=10\036:im=\Eq:\
+ :is=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
+ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
+ :me=\EG0\EH\003\EcD:mh=\EGp:mr=\EG4:nd=5\014:nw=5\037:\
+ :rs=100\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=\E1:ta=^I:ts=\EF:ue=\EG0:\
+ :up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
+ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode:\
+ :co#132:\
+ :cm=30\Ea%i%dR%dC:\
+ :is=200\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :rs=200\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :tc=ncr260wy350pp:
+# This definition for Wyse 50+ supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# (ncr260wy50+pp: originally contained commented-out
+# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260wy50+pp|NCR 2900_260 wyse 50+:\
+ :am:bw:hs:km:mi:ms:xo:\
+ :co#80:li#24:sg#1:ug#1:\
+ :K1=^^:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=5\EI:cd=5\EY:ce=5\ET:\
+ :cl=20\E+:cm=30\E=%+ %+ :cr=^M:ct=5\E0:dc=50\EW:dl=5\ER:\
+ :do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=10\036:im=\Eq:\
+ :is=100\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
+ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
+ :me=15\EG0\EH\003:mh=\EGp:mr=\EG4:nd=5\014:nw=5\037:\
+ :rs=100\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=5\E1:ta=5\011:ts=\EF:\
+ :ue=\EG0:up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
+ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode:\
+ :co#132:\
+ :cm=30\Ea%i%dR%dC:\
+ :is=200\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :rs=200\Ee6\E~"\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :tc=ncr260wy50+pp:
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+ncr260wy60pp|NCR 2900_260 wyse 60:\
+ :am:bw:hs:km:mi:ms:xo:\
+ :co#80:li#24:\
+ :K1=^^:K2=\EJ:K4=\ET:K5=\EK:al=5\EE:bl=^G:bt=15\EI:cd=5\Ey:\
+ :ce=5\Et:cl=100\E*:cm=10\E=%+ %+ :cr=^M:ct=15\E0:dc=50\EW:\
+ :dl=5\ER:do=5\n:ds=\E`c:ei=\Er:fs=^M:ho=25\036:im=\Eq:\
+ :is=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\Eq:kN=\EK:kP=\EJ:\
+ :kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=5\010:mb=\EG2:\
+ :me=15\EG0\EcB0\EcD:mr=\EG4:nd=5\014:nw=5\037:\
+ :rs=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\072\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :se=\EG0:sf=5\n:so=\EGt:sr=5\Ej:st=15\E1:ta=15\011:ts=\EF:\
+ :ue=\EG0:up=5\013:us=\EG8:ve=\E`1:vi=\E`0:vs=\E`5:
+ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode:\
+ :co#132:\
+ :cm=30\Ea%i%dR%dC:\
+ :is=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :rs=100\Ee6\E~4\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7:\
+ :tc=ncr260wy60pp:
+ncr160vppp|NCR 2900_160 viewpoint:\
+ :tc=ncr260vppp:
+ncr160vpwpp|NCR 2900_160 viewpoint wide mode:\
+ :tc=ncr260vpwpp:
+ncr160vt100an|NCR 2900_160 vt100 with ansi kybd:\
+ :tc=ncr260vt100an:
+ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd:\
+ :tc=ncr260vt100pp:
+ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd:\
+ :tc=ncr260vt100wan:
+ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd:\
+ :tc=ncr260vt100wpp:
+ncr160vt200an|NCR 2900_160 vt200 with ansi kybd:\
+ :tc=ncr260vt200an:
+ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd:\
+ :tc=ncr260vt200pp:
+ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd:\
+ :tc=ncr260vt200wan:
+ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd:\
+ :tc=ncr260vt200wpp:
+ncr160vt300an|NCR 2900_160 vt300 with ansi kybd:\
+ :tc=ncr260vt300an:
+ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd:\
+ :tc=ncr260vt300pp:
+ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd:\
+ :tc=ncr260vt300wan:
+ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd:\
+ :tc=ncr260vt300wpp:
+ncr160wy50+pp|NCR 2900_160 wyse 50+:\
+ :tc=ncr260wy50+pp:
+ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode:\
+ :tc=ncr260wy50+wpp:
+ncr160wy60pp|NCR 2900_160 wyse 60:\
+ :tc=ncr260wy60pp:
+ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode:\
+ :tc=ncr260wy60wpp:
+ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal:\
+ :5i:am:hs:mi:ms:xo:\
+ :Nl#32:co#80:it#8:li#24:\
+ :#4=\E[D:%i=\E[C:@8=^M:AL=80\E[%dL:DC=40\E[%dP:\
+ :DL=70\E[%dM:DO=30\E[%dB:K1=\E[H:LE=30\E[%dD:RI=30\E[%dC:\
+ :UP=30\E[%dA:\
+ :ac=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~:\
+ :ae=90\017:al=80\E[B\E[L:as=90\016:bl=^G:cb=30\E[1K:\
+ :cd=300\E[0J:ce=30\E[0K:cl=300\E[2J\E[1;1H:\
+ :cm=100\E[%i%d;%dH:cr=^M:cs=100\E[%i%d;%dr:ct=40\E[3g:\
+ :dc=10\E[1P:dl=40\E[M:do=2\E[B:ds=25\E[31l:eA=40\E(B\E)0:\
+ :ei=80\E[4l:fs=101:ho=80\E[H:im=80\E[4h:\
+ :is=200\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=2\E[D:mb=30\E[5m:md=30\E[1m:\
+ :me=120\017\E[0m:mr=30\E[7m:nd=2\E[C:nw=\EE:ps=100\E[i:\
+ :rc=\E8:\
+ :rs=200\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031:\
+ :sc=\E7:se=30\E[0m:sf=\ED:so=30\E[7m:sr=50\EM:st=\EH:ta=^I:\
+ :ts=70\E[>+1:ue=30\E[0m:up=2\E[A:us=30\E[4m:
+ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal:\
+ :co#132:\
+ :is=200\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0:\
+ :rs=200\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031:\
+ :tc=ncrvt100an:
+#
+# Vendor-supplied NCR termcaps end here
+
+# NCR7900 DIP switches:
+#
+# Switch A:
+# 1-4 - Baud Rate
+# 5 - Parity (Odd/Even)
+# 6 - Don't Send or Do Send Spaces
+# 7 - Parity Enable
+# 8 - Stop Bits (One/Two)
+#
+# Switch B:
+# 1 - Upper/Lower Shift
+# 2 - Typewriter Shift
+# 3 - Half Duplex / Full Duplex
+# 4 - Light/Dark Background
+# 5-6 - Carriage Return Without / With Line Feed
+# 7 - Extended Mode
+# 8 - Suppress Keyboard Display
+#
+# Switch C:
+# 1 - End of line entry disabled/enabled
+# 2 - Conversational mode / (Local?) Mode
+# 3 - Control characters displayed / not displayed
+# 4 - (2-wire?) / 4-wire communications
+# 5 - RTS on and off for each character
+# 6 - (50Hz?) / 60 Hz
+# 7 - Exit after level zero diagnostics
+# 8 - RS-232 interface
+#
+# Switch D:
+# 1 - Reverse Channel (yes / no)
+# 2 - Manual answer (no / yes)
+# 3-4 - Cursor appearance
+# 5 - Communication Rate
+# 6 - Enable / Disable EXT turnoff
+# 7 - Enable / Disable CR turnoff
+# 8 - Enable / Disable backspace
+#
+# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
+# reverse, blink, dim, and underline) the appropriate number of bits (by
+# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
+# '@' is (effectively) "or"ed with each attribute to generate the proper third
+# character in the <ESC>0 sequence. The :sa: string implements the following
+# equation:
+#
+# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
+# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
+#
+# Where: P1 <==> Standout attribute parameter
+# P2 <==> Underline attribute parameter
+# P3 <==> Reverse attribute parameter
+# P4 <==> Blink attribute parameter
+# P5 <==> Dim attribute parameter
+# From <[email protected]>, init string hacked by SCO.
+ncr7900i|ncr7900|ncr 7900 model 1:\
+ :am:bw:ul:\
+ :co#80:li#24:sg#1:ug#1:\
+ :bl=^G:cd=\Ek:ce=\EK:cl=^L:cm=\E1%r%.%.:cr=^M:do=^J:\
+ :is=\E0@\010\E3\E4\E7:kd=^J:kh=^A:kl=^U:kr=^F:ku=^Z:le=^H:\
+ :ll=^A:mb=\E0B:me=\E0@:mh=\E0A:mr=\E0P:nd=^F:pf=^T:po=^R:\
+ :se=\E0@:sf=^J:so=\E0Q:ue=\E0@:up=^Z:us=\E0`:
+ncr7900iv|ncr 7900 model 4:\
+ :am:bw:es:hs:\
+ :co#80:li#24:\
+ :al=\E^N:bl=^G:cl=^L:cm=\013%+@\E\005%2:cr=^M:dl=\E^O:\
+ :do=^J:ds=\Ey1:fs=\Ek\Ey5:ho=\013@\E^E00:k1=\ES:k2=\ET:\
+ :k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:kb=^H:kd=\EB:\
+ :kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:l8=white:le=^H:\
+ :nw=^M^J:sf=^J:ts=\Ej\Ex5\Ex1\EY8%+ \Eo:
+# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
+# The user can enter a CTRL-B to get out of this locked state.
+# In <hpa>, we want to output the character given by the formula:
+# ((col / 10) * 16) + (col % 10) where "col" is "p1"
+ncr7901|ncr 7901 model:\
+ :am:bw:ul:\
+ :co#80:li#24:\
+ :bl=^G:cd=\Ek:ce=\EK:ch=\020%B%.:cl=^L:cm=\EY%+ %+ :cr=^M:\
+ :cv=\013%+@:do=^J:is=\E4^O:kC=^L:kd=^J:kh=^H:kl=^U:kr=^F:\
+ :ku=^Z:le=^H:ll=^A:mb=\E0B:me=^O:mh=\E0A:mr=\E0P:nd=^F:pf=^T:\
+ :po=^R:se=^O:sf=^J:so=\E0Q\016:ue=^O:up=^Z:us=\E0`\016:\
+ :ve=^X:vi=^W:
+
+# Newbury Data Recording Limited (Newbury Data)
+#
+# Have been manufacturing and reselling various peripherals for a long time
+# They don't make terminals anymore, but are still in business (in 2007).
+# Their e-mail address is at [email protected]
+# and their post address is:
+#
+# Newbury Data Recording Ltd,
+# Premier Park, Road One,
+# Winsford, Cheshire, CW7 3PT
+#
+# Their technical support is still good, they sent me for free a printed copy
+# of the 9500 user manual and I got it just 1 week after I first contacted them
+# (in 2005)!
+
+# NDR 9500
+# Manufactured in the early/mid eighties, behaves almost the same as a
+# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
+# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
+# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
+# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
+# recognized: if you type in "ESC !", the next (third) character is not
+# echoed, showing that the terminal was actually waiting for a parameter!
+ndr9500|nd9500|Newbury Data 9500:\
+ :5i:am:bw:hs:mi:ms:ul:xo:\
+ :co#80:li#24:ws#79:\
+ :#3=\Eq:%9=\EP:*4=\Er:*5=\EO:*8=\Et:@8=^M:F1=^AJ\r:F2=^A`\r:\
+ :F3=^Aa\r:F4=^Ab\r:F5=^Ac\r:F6=^Ad\r:F7=^Ae\r:F8=^Af\r:\
+ :F9=^Ag\r:FA=^Ah\r:FB=^Ai\r:FC=^Aj\r:RX=^N:SX=^O:\
+ :ac=jDkClBmAnIqKtMuLvOwNxJ:ae=\E%%:al=\EE:as=\E$:bl=^G:\
+ :bt=\EI:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :cr=^M:ct=\E3:\
+ :dc=\EW:dl=\ER:do=^V:ds=\Eh:ei=\Er:fs=^M:ho=^^:ic=\EQ:im=\Eq:\
+ :is=\Ew\E'\EDF\El\Er\EO:k1=^A@\r:k2=^AA\r:k3=^AB\r:\
+ :k4=^AC\r:k5=^AD\r:k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:\
+ :k;=^AI\r:kA=\EE:kB=\EI:kC=^Z:kD=\EW:kE=\ET:kI=\EQ:kL=\ER:\
+ :kS=\EY:kd=^V:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:me=\EG0\E%%\E(:\
+ :mh=\E):mp=\E):nd=^L:nw=^_:pf=\Ea:pl=\E|%+02%r\031:po=\E`:\
+ :px=\E|%+01%r\031:se=\E(:sf=^J:so=\E):sr=\Ej:st=\E1:ta=^I:\
+ :ts=\Eg\Ef\011%+ :up=^K:vb=\Eb\Ed:ve=\E.1:vi=\E.0:
+
+ndr9500-nl|NDR 9500 with no status line:\
+ :hs@:\
+ :ws@:\
+ :ds@:fs@:ts@:tc=ndr9500:
+
+ndr9500-25|NDR 9500 with 25th line enabled:\
+ :li#25:tc=ndr9500:
+
+ndr9500-25-nl|NDR 9500 with 25 lines and no status line:\
+ :li#25:tc=ndr9500-nl:
+
+ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink):\
+ :ms@:\
+ :sg#1:ug#1:\
+ :mb=\EG2:me=\EG0\E%%\E(:mk=\EG1:mr=\EG4:se=\EG0:so=\EG4:\
+ :ue=\EG0:us=\EG8:tc=ndr9500:
+
+ndr9500-25-mc|NDR 500 with 25 lines and magic cookies:\
+ :li#25:tc=ndr9500-mc:
+
+ndr9500-mc-nl|NDR 9500 with magic cookies and no status line:\
+ :hs@:\
+ :ws@:\
+ :ds@:fs@:ts@:tc=ndr9500-mc:
+
+ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line:\
+ :li#25:tc=ndr9500-mc-nl:
+
+#### Perkin-Elmer (Owl)
+#
+# These are official terminfo entries from within Perkin-Elmer.
+#
+
+bantam|pe550|pe6100|perkin elmer 550:\
+ :bs:\
+ :co#80:li#24:\
+ :bl=^G:ce=20\EI:cl=20\EK:cm=\EX%+ \EY%+ :cr=^M:do=^J:\
+ :ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:up=\EA:
+fox|pe1100|perkin elmer 1100:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cd=5.5*\EJ:ce=\EI:cl=132\EH\EJ:cm=\EX%+ \EY%+ :\
+ :cr=^M:ct=\E3:do=^J:ho=\EH:le=^H:ll=\EH\EA:nd=\EC:sf=^J:\
+ :st=\E1:up=\EA:vb=\020\002\020\003:
+owl|pe1200|perkin elmer 1200:\
+ :am:bs:in:\
+ :co#80:li#24:\
+ :al=5.5*\EL:bl=^G:cd=5.5*\EJ:ce=5.5\EI:cl=132\EH\EJ:\
+ :cm=\EX%+ \EY%+ :cr=^M:ct=\E3:dc=5.5*\EO:dl=5.5*\EM:do=^J:\
+ :ei=:ho=\EH:ic=\EN:im=:ip=5.5*:k0=\ERJ:k1=\ERA:k2=\ERB:\
+ :k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:k7=\ERG:k8=\ERH:k9=\ERI:\
+ :kb=^H:le=^H:ll=\EH\EA:me=\E!\200:nd=\EC:se=\E!\200:sf=^J:\
+ :so=\E!^H:st=\E1:up=\EA:vb=\020\002\020\003:
+pe1251|pe6300|pe6312|perkin elmer 1251:\
+ :am:\
+ :co#80:it#8:li#24:pb#300:sg#1:vt#8:\
+ :bl=^G:cd=20*\EJ:ce=10*\EI:cl=332\EK:cm=\EX%+ \EY%+ :\
+ :cr=^M:ct=\E3:do=\EB:ho=\EH:k0=\ERA:k1=\ERB:k2=\ERC:k3=\ERD:\
+ :k4=\ERE:k5=\ERF:k6=\ERG:k7=\ERH:k8=\ERI:k9=\ERJ:k;=\ERK:\
+ :le=\ED:nd=\EC:sf=^J:st=\E1:up=\EA:
+# (pe7000m: this had
+# rmul=\E!\0, smul=\E!\040,
+# which is probably wrong, it collides with kf0
+pe7000m|perkin elmer 7000 series monochrome monitor:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:bt=\E!Y:cd=\EJ:ce=\EI:cl=\EK:cm=\ES%+ %+ :cr=^M:\
+ :do=\EB:ho=\EH:i1=\E!\200\EW 7o\Egf\ES7\040:k0=\E!\200:\
+ :k1=\E!^A:k2=\E!^B:k3=\E!^C:k4=\E!^D:k5=\E!^E:k6=\E!^F:\
+ :k7=\E!^G:k8=\E!^H:k9=\E!^I:k;=\E!^J:kb=^H:kd=\E!U:kh=\E!S:\
+ :kl=\E!V:kr=\E!W:ku=\E!T:le=\ED:ll=\ES7\040:nd=\EC:sf=^J:\
+ :sr=\ER:up=\EA:
+pe7000c|perkin elmer 7000 series colour monitor:\
+ :i1=\E!\200\EW 7o\Egf\Eb0\Ec7\ES7\040:se=\Eb0:so=\Eb2:\
+ :ue=\E!\200:us=\E!\040:tc=pe7000m:
+
+#### Sperry Univac
+#
+# Sperry Univac has merged with Burroughs to form Unisys.
+#
+
+# This entry is for the Sperry UTS30 terminal running the TTY
+# utility under control of CP/M Plus 1R1. The functionality
+# provided is comparable to the DEC vt100.
+# (uts30: I added <rmam>/<smam> based on the init string -- esr)
+uts30|sperry uts30 with cp/m@1R1:\
+ :am:bw:hs:\
+ :co#80:li#24:ws#40:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7m:SF=\E[%dB:\
+ :SR=\E[%dA:UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\Ed:al=\EN:as=\EF:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\EU%+ %+ :dc=\EM:dl=\EL:do=\E[B:\
+ :ei=:fs=^M:ho=\E[H:ic=\EO:im=:is=\E[U 7\E[24;1H:kb=^H:\
+ :kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:mb=\E[5m:\
+ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\EX:\
+ :rf=/usr/share/tabset/vt100:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\EW:se=\E[m:\
+ :sf=^J:so=\E[7m:sr=\EI:ta=^I:ts=\E]:uc=\EPB:ue=\E[m:up=\E[A:\
+ :us=\E[4m:ve=\ES:vi=\ER:
+
+#### Tandem
+#
+# Tandem builds these things for use with its line of fault-tolerant
+# transaction-processing computers. They aren't generally available
+# on the merchant market, and so are fairly uncommon.
+#
+
+tandem6510|adm3a repackaged by Tandem:\
+ :tc=adm3a:
+
+# A funny series of terminal that TANDEM uses. The actual model numbers
+# have a fourth digit after 653 that designates minor variants. These are
+# natively block-mode and rather ugly, but they have a character mode which
+# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
+# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
+# removed :if=/usr/share/tabset/tandem653:, no such file -- esr)
+tandem653|t653x|Tandem 653x multipage terminal:\
+ :am:bs:da:db:hs:\
+ :co#80:li#24:sg#1:ug#1:ws#64:\
+ :cd=\EJ:ce=\EK:cl=\EI:cm=\023%+ %+ :do=^J:ds=\Eo\r:fs=^M:\
+ :ho=\EH:le=^H:me=\E6\040:nd=\EC:se=\E6\040:sf=\ES:so=\E6$:\
+ :sr=\ET:ts=\Eo:ue=\E6\040:up=\EA:us=\E60:
+
+#### Tandy/Radio Shack
+#
+# Tandy has a line of VDTs distinct from its microcomputers.
+#
+
+dmterm|deskmate terminal:\
+ :am:bw:\
+ :co#80:li#24:\
+ :al=\EP:bl=^G:cd=\EJ:ce=\EK:cl=\Ej:cm=\EY%+ %+ :cr=^M:\
+ :dc=\ES:dl=\ER:do=\EB:ei=:ho=\EH:ic=\EQ:im=:k0=\E1:k1=\E2:\
+ :k2=\E3:k3=\E4:k4=\E5:k5=\E6:k6=\E7:k7=\E8:k8=\E9:k9=\E0:\
+ :kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l0=f1:l1=f2:l2=f3:l3=f4:\
+ :l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:le=^H:ll=\EE:mk@:nd=\EC:\
+ :sf=\EX:ta=^I:ue@:up=\EA:us@:ve=\EG6:vi=\EG5:tc=adm+sgr:
+dt100|dt-100|Tandy DT-100 terminal:\
+ :xo:\
+ :co#80:li#24:sg#1:ug#1:\
+ :ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[L:as=^N:bl=^G:\
+ :cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\010\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%2;%2r:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:\
+ :im=:is=\E[?3l\E)0\E(B:k1=\E[?3i:k2=\E[2i:k3=\E[@:k4=\E[M:\
+ :k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\
+ :k;=\E[?5i:kN=\E[29~:kP=\E[28~:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:l1=f1:l2=f2:l3=f3:l4=f4:l5=f5:l6=f6:l7=f7:\
+ :l8=f8:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:\
+ :ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
+dt100w|dt-100w|Tandy DT-100 terminal (wide mode):\
+ :co#132:tc=dt100:
+dt110|Tandy DT-110 emulating ansi:\
+ :xo:\
+ :co#80:li#24:\
+ :@7=\E[K:ac=jjkkllmmnnqqttuuvvwwxx:ae=^O:al=\E[0L:as=^N:\
+ :bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:cm=\010\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:dc=\E[0P:dl=\E[0M:do=\E[B:\
+ :eA=\E(B\E)0:ei=:ho=\E[H:ic=\E[0@:im=:is=\E[?3l\E)0\E(B:\
+ :k1=\E[1~:k2=\E[2~:k3=\E[3~:k4=\E[4~:k5=\E[5~:k6=\E[6~:\
+ :k7=\E[7~:k8=\E[8~:k9=\E[9~:k;=\E[10~:kI=\E[@:kN=\E[26~:\
+ :kP=\E[25~:kd=\E[B:kh=\E[G:kl=\E[D:kr=\E[C:ku=\E[A:l0=f1:\
+ :l1=f2:l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:l8=f9:l9=f10:le=^H:\
+ :me=\E[m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:sr=\EM:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l:
+pt210|TRS-80 PT-210 printing terminal:\
+ :hc:os:\
+ :co#80:\
+ :bl=^G:cr=^M:do=^J:sf=^J:
+
+#### Tektronix (tek)
+#
+# Tektronix tubes are graphics terminals. Most of them use modified
+# oscilloscope technology incorporating a long-persistence green phosphor,
+# and support vector graphics on a main screen with an attached "dialogue
+# area" for interactive text.
+#
+
+tek|tek4012|tektronix 4012:\
+ :bs:os:\
+ :co#75:li#35:\
+ :bl=^G:cl=1000\E\014:cr=^M:do=^J:ff=1000\014:is=\E^O:le=^H:
+# (tek4013: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
+tek4013|tektronix 4013:\
+ :ac=:ae=\E^O:as=\E^N:tc=tek4012:
+tek4014|tektronix 4014:\
+ :co#81:li#38:\
+ :is=\E\017\E9:tc=tek4012:
+# (tek4015: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
+tek4015|tektronix 4015:\
+ :ac=:ae=\E^O:as=\E^N:tc=tek4014:
+tek4014-sm|tektronix 4014 in small font:\
+ :co#121:li#58:\
+ :is=\E\017\E\072:tc=tek4014:
+# (tek4015-sm: added <acsc> to suppress tic warnings re :as:/:ae: --esr)
+tek4015-sm|tektronix 4015 in small font:\
+ :ac=:ae=\E^O:as=\E^N:tc=tek4014-sm:
+# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
+#
+# You need to have "stty nl2" in effect. Some versions of tset(1) know
+# how to set it for you.
+#
+# It's got the Magic Cookie problem around stand-out mode. If you can't
+# live with Magic Cookie, remove the :so: and :se: fields and do without
+# reverse video. If you like reverse video stand-out mode but don't want
+# it to flash, change the letter 'H' to 'P' in the :so: field.
+tek4023|tektronix 4023:\
+ :am:bs:\
+ :co#80:dN#4:li#24:sg#1:vt#4:\
+ :bl=^G:cl=4\E\014:cm=\034%r%+ %+ :cr=^M:do=^J:kb=^H:le=^H:\
+ :nd=^I:nl=^J:se=^_@:so=^_P:
+# It is recommended that you run the 4025 at 4800 baud or less;
+# various bugs in the terminal appear at 9600. It wedges at the
+# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
+# on keyboard don't work. You have to hit BREAK twice to get
+# one break at any speed - this is a documented feature.
+# Can't use cursor motion because it's memory relative, and
+# because it only works in the workspace, not the monitor.
+# Same for home. Likewise, standout only works in the workspace.
+#
+# :ce: was commented out since vi and rogue seem to work better
+# simulating it with lots of spaces!
+#
+# :al: and :AL: had 145ms of padding, but that slowed down vi's ^U
+# and didn't seem necessary.
+#
+tek4024|tek4025|tek4027|tektronix 4024/4025/4027:\
+ :am:bs:da:db:\
+ :co#80:it#8:li#34:lm#0:\
+ :AL=\037up\r\037ili %d\r:CC=^_:DL=\037dli %d\r\006:\
+ :DO=\037dow %d\r:LE=\037lef %d\r:RI=\037rig %d\r:\
+ :UP=\037up %d\r:al=\037up\r\037ili\r:bl=^G:\
+ :cd=\037dli 50\r:cl=\037era\r\n\n:cr=^M:dc=\037dch\r:\
+ :dl=\037dli\r\006:do=^F^J:ei=:ic=\037ich\r \010:im=:\
+ :is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\
+ :ke=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r:\
+ :ks=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r:\
+ :le=^H:nd=\037rig\r:sf=^F^J:ta=^I:up=^K:
+tek4025-17|tek 4025 17 line window:\
+ :li#17:tc=tek4025:
+tek4025-17-ws|tek 4025 17 line window in workspace:\
+ :is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r:\
+ :se=\037att s\r:so=\037att e\r:te=\037mon h\r:\
+ :ti=\037wor h\r:tc=tek4025-17:
+tek4025-ex|tek4027-ex|tek 4025/4027 w/!:\
+ :is=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r:\
+ :te=\037com 33\r:ti=!com 31\r:tc=tek4025:
+# Tektronix 4025a
+# From: Doug Gwyn <[email protected]>
+# The following status modes are assumed for normal operation (replace the
+# initial "!" by whatever the current command character is):
+# !COM 29 # NOTE: changes command character to GS (^])
+# ^]DUP
+# ^]ECH R
+# ^]EOL
+# ^]RSS T
+# ^]SNO N
+# ^]STO 9 17 25 33 41 49 57 65 73
+# Other modes may be set according to communication requirements.
+# If the command character is inadvertently changed, termcap can't restore it.
+# Insert-character cannot be made to work on both top and bottom rows.
+# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
+# There also seems to be a problem with vertical motion, perhaps involving
+# delete/insert-line, following a typed carriage return. This terminal sucks.
+# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
+# work any more. -- esr)
+tek4025a|Tektronix 4025A:\
+ :am:bs:bw:da:db:pt:xo:\
+ :co#80:it#8:li#34:\
+ :CC=^]:DC=\035dch %d;:DL=\035dli %d;:DO=\035dow %d;:\
+ :LE=\035lef %d;:RI=\035rig %d;:SF=\035dow %d;:\
+ :UP=\035up %d;:al=\013\035ili;:bl=^G:bt=\035bac;:\
+ :ce=\035dch 80;:ch=\r\035rig %d;:cl=\035era;\n\035rup;:\
+ :cr=^M:ct=\035sto;:dc=\035dch;:dl=\035dli;:do=^J:le=^H:\
+ :nd=\035rig;:\
+ :rs=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;:\
+ :sf=^J:ta=^I:up=^K:
+# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
+# Here's the command file that I use to get rogue to work on the 4025.
+# It should work with any program using the old curses (e.g. it better
+# not try to scroll, or cursor addressing won't work. Also, you can't
+# see the cursor.)
+# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
+tek4025-cr|tek 4025 for curses and rogue:\
+ :am:bs:\
+ :co#80:it#8:li#33:\
+ :cl=\037era;:cm=\037jum%i%d,%d;:do=^F^J:\
+ :is=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r:\
+ :le=^H:nd=\037rig;:sf=^F^J:ta=^I:te=\037wor 0:\
+ :ti=\037wor 33h:up=^K:
+# next two lines commented out since curses only allows 128 chars, sigh.
+# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
+# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
+tek4025ex|4025ex|4027ex|tek 4025 w/!:\
+ :is=\037com 33\r\n!sto 9,17,25,33,41,49,57,65,73\r:\
+ :te=\037com 33\r:ti=!com 31\r:tc=tek4025:
+tek4105|tektronix 4105:\
+ :am:bs:mi:ms:ul:xn:xt:\
+ :co#79:it#8:li#29:\
+ :ac=:ae=\E[m:al=\E[1L:as=\E[1m:bl=^G:bt=\E[Z:cd=\E[J:\
+ :ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%2;%2H:cr=^M:ct=\E[1g:\
+ :dc=\E[1P:dl=\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:i1=\E%!1\E[m:\
+ :im=\E[4h:is=\E%!1\E[?6141\E[m:kb=^H:kd=\E[1B:kl=\E[1D:\
+ :kr=\E[1C:ku=\E[1A:le=\E[1D:mb=\E[=3;<7m:md=\E[=7;<4m:\
+ :me=\E[=0;<1m:mh=\E[=1;<6m:mk=\E[=6;<5:mr=\E[=1;<3m:\
+ :nd=\E[1C:se=\E[=0;<1m:sf=\E[S:so=\E[=2;<3m:sr=\E[T:ta=^I:\
+ :te=:ti=\E%!1\E[?6l\E[2J:ue=\E[=0;<1m:up=\E[1A:\
+ :us=\E[=5;<2m:
+
+# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
+tek4105-30|4015 emulating 30 line vt100:\
+ :am:mi:ms:xn:xo:\
+ :co#80:it#8:li#30:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:do=^J:eA=\E(B\E)0:ho=\E[H:kb=^H:kd=\EOB:\
+ :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
+ :mb=2\E[5m:md=2\E[1m:me=2\E[0m:mr=2\E[7m:nd=2\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=2\E[m:\
+ :sf=^J:so=2\E[1;7m:sr=5\EM:st=\EH:ta=^I:ue=2\E[m:up=2\E[A:\
+ :us=2\E[4m:tc=vt100+fnkeys:
+
+# Tektronix 4105 from BRL
+# The following setup modes are assumed for normal operation:
+# CODE ansi CRLF no DABUFFER 141
+# DAENABLE yes DALINES 30 DAMODE replace
+# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
+# FLAGGING input INSERTREPLACE replace LFCR no
+# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
+# SELECTCHARSET G1 0 TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
+# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
+# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
+# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
+# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
+# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
+# XMTDELAY 0
+# and factory color maps. After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+# "tek4105a" is just a guess:
+tek4105a|Tektronix 4105:\
+ :bs:ms:pt:xo:\
+ :co#80:it#8:kn#8:li#30:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:ae=^O:al=\E[L:\
+ :as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E%!1:k0=\EOA:k1=\EOB:k2=\EOC:k3=\EOD:k4=\EOP:k5=\EOQ:\
+ :k6=\EOR:k7=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\
+ :l5=F6:l6=F8:le=^H:ll=\E[30;H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:\
+ :rs=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>:\
+ :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :te=\E%!0\ELBH=\E%!1:ti=\E[?6l:ue=\E[m:up=\EM:us=\E[4m:\
+ :ve=\E%!0\ETD10\E%!1:vi=\E%!0\ETD00\E%!1:\
+ :vs=\E%!0\ETD70\E%!1:
+
+#
+# Tektronix 4106/4107/4109 from BRL
+# The following setup modes are assumed for normal operation:
+# CODE ansi COLUMNMODE 80 CRLF no
+# DABUFFER 141 DAENABLE yes DALINES 32
+# DAMODE replace DAVISIBILITY yes ECHO no
+# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
+# LFCR no LOCKKEYBOARD no ORIGINMODE relative
+# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
+# TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
+# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
+# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
+# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
+# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
+# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
+# XMTDELAY 0
+# and factory color maps. After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109:\
+ :ms:xo:\
+ :co#80:it#8:li#32:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:ae=^O:al=\E[L:\
+ :as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
+ :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E%!1:k0=\EOA:k1=\EOB:k2=\EOC:k3=\EOD:k4=\EOP:k5=\EOQ:\
+ :k6=\EOR:k7=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:l4=F5:\
+ :l5=F6:l6=F8:le=^H:ll=\E[32;H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mr=\E[7m:nd=\E[C:nw=\EE:\
+ :r1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>:\
+ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7;42m:sr=\EM:st=\EH:\
+ :ta=^I:te=\E%!0\ELBH=\E%!1:ti=\E[?6l:ue=\E[m:up=\EM:\
+ :us=\E[4m:ve=\E%!0\ETD10\E%!1:vi=\E%!0\ETD00\E%!1:\
+ :vs=\E%!0\ETD70\E%!1:
+
+# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
+# 0 selects Tek mode, i.e., \E%!0
+# 1 selects ANSI mode
+# 2 selects ANSI edit-mode
+# 3 selects VT52 mode
+#
+# One odd thing about the description (which has been unchanged since the 90s)
+# is that the cursor addressing is using VT52 mode, and a few others use the
+# VT52's non-CSI versions of ANSI, e.g., \EJ.
+tek4107|tek4109|tektronix terminals 4107 4109:\
+ :am:bs:mi:ms:ul:xn:xt:\
+ :co#79:it#8:li#29:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=\ELZ:cm=\EY%+ %+ :cr=^M:do=^J:kb=^H:\
+ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:mb=\E%!1\E[5m\E%!0:\
+ :md=\E%!1\E[1m\E%!0:me=\E%!1\E[m\E%!0:\
+ :mh=\E%!1\E[<0m\E%!0:mr=\E%!1\E[7m\E%!0:nd=\EC:\
+ :se=\E%!1\E[m\E%!0:sf=^J:so=\E%!1\E[7;5m\E%!0:sr=\EI:\
+ :ta=^I:ue=\E%!1\E[m\E%!0:up=\EA:us=\E%!1\E[4m\E%!0:\
+ :ve=\E%!0:vs=\E%!3:
+# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
+# see the note attached to tek4207.
+tek4207-s|Tektronix 4207 with sysline but no memory:\
+ :es:hs:\
+ :ds=\E7\E[?6l\E[2K\E[?6h\E8:fs=\E[?6h\E8:\
+ :i1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\
+ :is=\E7\E[?6l\E[2K\E[?6h\E8:\
+ :ts=\E7\E[?6l\E[2K\E[;%i%df:tc=tek4107:
+
+# The 4110 series may be a wonderful graphics series, but they make the 4025
+# look good for screen editing. In the dialog area, you can't move the cursor
+# off the bottom line. Out of the dialog area, ^K moves it up, but there
+# is no way to scroll.
+#
+# Note that there is a floppy for free from Tek that makes the
+# 4112 emulate the vt52 (use the vt52 termcap). There is also
+# an expected enhancement that will use ANSI standard sequences.
+#
+# 4112 in non-dialog area pretending to scroll. It really wraps
+# but vi is said to work (more or less) in this mode.
+#
+# 'vi' works reasonably well with this entry.
+#
+otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series:\
+ :am:\
+ :co#80:li#34:\
+ :bl=^G:cl=\E^L:cr=^M:do=^J:le=^H:sf=^J:te=\EKA1\ELV1:\
+ :ti=\EKA0\ELV0\EMG0:up=^K:
+# The 4112 with the ANSI compatibility enhancement
+tek4112|tek4114|tektronix 4110 series:\
+ :am:bs:db:\
+ :co#80:li#34:\
+ :al=\E[L:bt=\E[Z:cd=\E[0J:ce=\E[0K:cl=\E[2J\E[0;0H:\
+ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:ic=\E[@:im=:\
+ :is=\E3!1:le=^H:me=\E[m:nd=\E[C:se=\E[m:\
+ :sf=\E7\E[0;0H\E[M\E8:so=\E[7m:sr=\E7\E[0;0H\E[L\E8:\
+ :ue=\E[m:up=\EM:us=\E[4m:
+tek4112-nd|4112 not in dialog area:\
+ :ns:\
+ :up=^K:tc=tek4112:
+tek4112-5|4112 in 5 line dialog area:\
+ :li#5:tc=tek4112:
+# (tek4113: this used to have ":nd=\LM1\s\LM0:", someone's mistake;
+# removed ":as=\E^N:, :ae=\E^O:", which had been commented out in 8.3.
+# Note, the !0 and !1 sequences in :te:/:ti:/:ve:/:vi: were
+# previously \0410 and \0411 sequences...I don't *think* they were supposed
+# to be 4-digit octal -- esr)
+tek4113|tektronix 4113 color graphics with 5 line dialog area:\
+ :am:bs:da:eo:\
+ :co#80:li#5:\
+ :cl=\ELZ:do=^J:is=\EKA1\ELL5\ELV0\ELV1:le=^H:\
+ :nd=\ELM1 \ELM0:uc=\010\ELM1_\ELM0:\
+ :vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:
+tek4113-34|tektronix 4113 color graphics with 34 line dialog area:\
+ :li#34:\
+ :is=\EKA1\ELLB2\ELV0\ELV1:tc=tek4113:
+# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
+# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
+# :vb: needs enough delay to let you see the background color being toggled.
+tek4113-nd|tektronix 4113 color graphics with no dialog area:\
+ :am:bs:eo:\
+ :co#80:it#8:li#34:\
+ :cl=\E^L:do=^J:ho=\ELF7l\177 @:is=\ELZ\EKA0\ELF7l\177 @:\
+ :le=^H:ll=\ELF hl @:nd=^I:se=\EMT1:so=\EMT2:ta=^I:\
+ :uc=\010\EMG1_\EMG0:up=^K:\
+ :vb=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0:\
+ :vs=\ELZ\EKA0:
+# This entry is from Tek. Inc. (Brian Biehl)
+# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
+otek4115|Tektronix 4115:\
+ :am:bs:da:db:eo:\
+ :co#80:it#8:li#34:\
+ :RA=\E[?7l:SA=\E[?7h:al=\E[L:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[2J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ei=\E[4l:ho=\E[H:if=/usr/share/tabset/vt100:im=\E[4h:\
+ :is=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m:\
+ :kb=^H:ke=\E>:ks=\E=:le=\E[D:me=\E[m:nd=\E[C:se=\E[m:\
+ :so=\E[7m:sr=\EM:ta=^I:te=\E%!0\ELBG8\E%!1\E[34;1H\E[J:\
+ :ti=\E%!0\ELBB2\E%!1:ue=\E[m:up=\E[A:us=\E[4m:\
+ :ve=\E%!0\ELBG8\E%!1\E[34;1H:vs=\E%!0\ELBB2\E%!1:
+tek4115|newer tektronix 4115 entry with more ANSI capabilities:\
+ :am:xo:\
+ :co#80:li#34:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
+ :RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:\
+ :bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%+^AG:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:\
+ :dl=\E[M:do=^J:ei=:ho=\E[H:ic=\E[@:im=:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mk=\E[8m:mr=\E[7m:nd=\E[C:se=\E[m:sf=^J:so=\E[7m:st=\EH:\
+ :ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+# The tek4125 emulates a vt100 incorrectly - the scrolling region
+# command is ignored. The following entry replaces :cs: with the needed
+# :AL:, :AL:, and :im:; removes some cursor pad commands that the tek4125
+# chokes on; and adds a lot of initialization for the tek dialog area.
+# Note that this entry uses all 34 lines and sets the cursor color to green.
+# Steve Jacobson 8/85
+# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
+# commented out, :im:=\E1 because there's no :ei: -- esr)
+tek4125|tektronix 4125:\
+ :li#34:\
+ :al=\E[1L:cs@:dl=\E[1M:\
+ :is=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :ks=\E=:rc@:sc@:tc=vt100:
+
+# From: <jcoker@ucbic>
+# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
+# supplied another, less capable 4107 entry. So we'll use that for 4107 and
+# note that if jcoker wasn't confused you may be able to use this one.
+# I merged in :ms:,:sf:,:sr:,<invis>,:ct: from a BRL entry -- esr)
+tek4207|Tektronix 4207 graphics terminal with memory:\
+ :am:bw:mi:ms:ul:xn:\
+ :co#80:it#8:li#32:\
+ :al=3\E[L:bt=\E[Z:cd=\E[J:ce=5\E[K:cl=156\E[H\E[J:\
+ :cm=\E[%i%d;%dH:ct=\E[1g:dc=4\E[P:dl=3\E[M:do=^J:ei=:\
+ :ho=\E[H:ic=4\E[@:im=:\
+ :is=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J:\
+ :kd=\ED:kh=\E[H:kl=\E[D:kr=\E[C:ku=\EM:le=^H:mb=\E[5m:\
+ :md=\E[1m:me=\E[m:mk=\E[=6;<5:mr=\E[7m:nd=\E[C:se=\E[m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:\
+ :te=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f:ti=\E[?6l\E[H\E[J:\
+ :ue=\E[m:up=\EM:us=\E[4m:
+
+# From: <[email protected]> Thu Oct 31 12:54:27 1985
+# (tek4404: There was a "\!" in :ti: that I replaced with "\E!".
+# Tab had been given as \E2I,that must be the tab-set capability -- esr)
+tek4404|tektronix 4404:\
+ :bs:\
+ :co#80:it#8:li#32:\
+ :al=\E[1L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[1M:do=^J:ei=\E[4l:ho=\E[H:\
+ :im=\E[4h:kd=\E[B:ke=\E[?1h:kl=\E[D:kr=\E[C:ks=\E[?1l:\
+ :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:rc=\E8:\
+ :sc=\E7:se=\E[27m:so=\E[7m:st=\E[2I:ta=^I:\
+ :te=\E[1;1H\E[0J\E[?6h\E[?1l:\
+ :ti=\E%\E!1\E[1;32r\E[?6l\E>:ue=\E[m:up=\E[A:us=\E[4m:
+# Some unknown person wrote:
+# I added the is string - straight Unix has ESC ; in the login
+# string which sets a ct8500 into monitor mode (aka 4025 snoopy
+# mode). The is string here cleans up a few things (but not
+# everything).
+ct8500|tektronix ct8500:\
+ :am:bw:da:db:\
+ :co#80:li#25:\
+ :al=\E^L:bl=^G:bt=\E^I:cd=\E^U:ce=\E^T:cl=\E^E:\
+ :cm=\E|%+ %+ :cr=^M:dc=\E^]:dl=\E^M:do=^J:ei=:ic=\E^\:im=:\
+ :is=\037\EZ\Ek:le=^H:me=\E\040:nd=\ES:se=\E\040:sf=^J:\
+ :so=\E$:sr=\E^A:ta=^I:ue=\E\040:up=\ER:us=\E!:
+
+# Tektronix 4205 terminal.
+#
+# am is not defined because the wrap around occurs not when the char.
+# is placed in the 80'th column, but when we are attempting to type
+# the 81'st character on the line. (esr: hmm, this is like the vt100
+# version of xenl, perhaps am + xenl would work!)
+#
+# Bold, dim, and standout are simulated by colors and thus not allowed
+# with colors. The tektronix color table is mapped into the RGB color
+# table by setf/setb. All colors are reset to factory specifications by oc.
+# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
+# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
+# interval then maps into pre-defined value.
+tek4205|tektronix 4205:\
+ :cc:mi:ms:\
+ :Co#8:NC#49:co#80:it#8:li#30:pa#63:\
+ :AL=\E[%dL:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=\E[1L:as=^N:bl=^G:bt=\E[Z:cb=\E[1K:cd=\E[J:\
+ :ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:ct=\E[1g:\
+ :dc=\E[1P:dl=\E[1M:do=\E[B:eA=\E)0:ec=\E%dX:ei=\E[4l:\
+ :ho=\E[H:i1=\E%!0\ETM1\E%!1\E[m:im=\E[4h:k0=\EOA:k1=\EOB:\
+ :k2=\EOC:k3=\EOD:k4=\EP:k5=\EQ:k6=\ER:k7=\ES:kb=^H:kd=\E[B:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:md=\E[=7;<4m:\
+ :me=\E[=0;<1m\E[24;25;27m\017:mh=\E[=1;<6m:mk=\E[=6;<5:\
+ :mr=\E[7m:nd=\E[C:\
+ :oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1:\
+ :op=\E[39;40m:se=\E[=0;<1m:sf=\ED:so=\E[=2;<3m:sr=\EM:\
+ :ta=^I:te=:ti=\E%%!1\E[?6l\E[2J:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:
+
+#### Teletype (tty)
+#
+# These are the hardcopy Teletypes from before AT&T bought the company,
+# clattering electromechanical dinosaurs in Bakelite cases that printed on
+# pulpy yellow roll paper. If you remember these you go back a ways.
+# Teletype-branded VDTs are listed in the AT&T section.
+#
+# The earliest UNIXes were designed to use these clunkers; nroff and a few
+# other programs still default to emitting codes for the Model 37.
+#
+
+tty33|tty35|model 33 or 35 teletype:\
+ :hc:os:xo:\
+ :co#72:\
+ :bl=^G:cr=^M:do=^J:sf=^J:
+tty37|model 37 teletype:\
+ :bs:hc:os:xo:\
+ :bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7:
+
+# There are known to be at least three flavors of the tty40, all seem more
+# like IBM half duplex forms fillers than ASCII terminals. They have lots of
+# awful braindamage, such as printing a visible newline indicator after each
+# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
+# braindamaged but has hope and is described here. The 40-4 is a 3270
+# lookalike and beyond hope. The terminal has visible bell but I don't know
+# it - it's null here to prevent it from showing the BL character.
+# There is an \EG in <nl> because of a bug in old vi (if stty says you have
+# a "newline" style terminal (-crmode) vi figures all it needs is nl
+# to get crlf, even if :cr: is not ^M.)
+# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
+tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2:\
+ :bs:xo:\
+ :co#80:li#24:\
+ :al=50\EL:cd=75\EJ:cl=80\EH\EJ:cr=\EG:ct=80\EH\E2:\
+ :dc=50\EP:dl=50\EM:do=\EB:ei=:ho=10\EH:ic=50\E\136:im=:\
+ :kb=^]:kl=^H:le=^H:nd=\EC:pf=^T:po=2000\022:rs=60\023\ER:\
+ :se=\E4:sf=20\ES:so=\E3:sr=10\ET:st=\E1:ta=10\E@:up=\E7:
+tty43|model 43 teletype:\
+ :am:bs:hc:os:xo:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J:
+
+#### Tymshare
+#
+
+# You can add :is=\E<: to put this 40-column mode, though I can't
+# for the life of me think why anyone would want to.
+scanset|sc410|sc415|Tymshare Scan Set:\
+ :am:bw:ms:\
+ :co#80:li#24:\
+ :ac=j%k4l<m-q,x5:ae=^O:as=^N:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:\
+ :cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:kd=\EB:kl=\ED:kr=\EC:\
+ :ku=\EA:le=^H:nd=^I:pf=\E;0:po=\E;0:ps=\E;3:r1=\E>:rc=^C:\
+ :sc=^B:sf=^J:up=^K:
+
+#### Volker-Craig (vc)
+#
+# If you saw a Byte Magazine cover with a terminal on it during the early
+# 1980s, it was probably one of these. Carl Helmers liked them because
+# they could crank 19.2 and were cheap (that is, he liked them until he tried
+# to program one...)
+#
+
+# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
+# every other linefeed.
+vc303|vc103|vc203|volker-craig 303:\
+ :am:bs:ns:\
+ :co#80:li#24:\
+ :bl=^G:cl=40\014:cr=^M:do=^J:ho=40\013:kd=^J:kl=^H:kr=^I:\
+ :ku=^N:le=^H:ll=\017W:nd=^I:up=^N:
+vc303a|vc403a|volker-craig 303a:\
+ :ce=20\026:cl=40\030:ho=40\031:kr=^U:ku=^Z:ll=^P:nd=^U:\
+ :up=^Z:tc=vc303:
+# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
+vc404|volker-craig 404:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cd=40\027:ce=20\026:cl=40\030:cm=\020%+ %+ :cr=^M:\
+ :do=^J:ho=40\031:kd=^J:kl=^H:kr=^U:ku=^Z:le=^H:nd=^U:sf=^J:\
+ :up=^Z:
+vc404-s|volker-craig 404 w/standout mode:\
+ :do=^J:se=^O:so=^N:tc=vc404:
+# From: <[email protected]>
+# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
+vc414|vc414h|Volker-Craig 414H in sane escape mode.:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=40\E\032:cd=\E^X:ce=10\E\017:cl=40\E\034:\
+ :cm=40\E\021%r%.%.:dc=\E3:dl=40\E\023:do=\E^K:ei=:ho=\E^R:\
+ :ic=\E\072:im=:k0=\EA:k1=\EB:k2=\EC:k3=\ED:k4=\EE:k5=\EF:\
+ :k6=\EG:k7=\EH:kd=\E^K:kh=\E^R:kl=^H:kr=^P:ku=\E^L:l0=PF1:\
+ :l1=PF2:l2=PF3:l3=PF4:l4=PF5:l5=PF6:l6=PF7:l7=PF8:nd=^P:\
+ :se=\E^_:so=\E^Y:up=\E^L:
+vc415|volker-craig 415:\
+ :cl=^L:tc=vc404:
+
+######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
+#
+
+#### IBM PC and clones
+#
+
+# The pcplot IBM-PC terminal emulation program is really messed up. It is
+# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
+# doesn't support scrolling regions, ignores add line commands, and ignores
+# delete line commands. Consequently, the resulting behavior looks like a
+# crude adm3a-type terminal.
+# Steve Jacobson 8/85
+pcplot|pc-plot terminal emulation program:\
+ :xn@:\
+ :AL@:DL@:al@:cs@:dl@:rc@:sc@:tc=vt100:
+# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
+# I've found that my KayPro II, running MDM730, continues to emulate an
+# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
+# system the following termcap entry works well:
+# I have noticed a couple of minor glitches, but nothing I can't work
+# around. (I added two capabilities from the BRL entry -- esr)
+kaypro|kaypro2|kaypro II:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=\EE:bl=^G:cd=^W:ce=^X:cl=1\032:cm=\E=%+ %+ :cr=^M:\
+ :dl=\ER:do=^J:ho=^^:kd=^J:kr=^L:ku=^K:nd=^L:sf=^J:up=^K:
+
+# From IBM, Thu May 5 19:35:27 1983
+# (ibmpc: commented out :im:=\200R because we don't know :ei: -- esr)
+ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS):\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cl=^L^K:cr=^M^^:do=^J:ho=^K:kd=^_:le=^]:nd=^\:sf=10\n:\
+ :up=^^:
+
+ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX:\
+ :am:bs:bw:eo:hs:km:ms:ul:\
+ :co#80:it#8:li#24:\
+ :@7=\E[Y:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS\E[%dB:\
+ :SR=\E[%dT\E[%dA:UP=\E[%dA:\
+ :ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\
+ :bl=^G:cd=\E[J:ce=\E[K:ch=\E[%i%dG:cl=\Ec:cm=\E[%i%d;%dH:\
+ :cr=^M:do=\E[B:ec=\E[%dX:ho=\E[H:k1=\240:k2=\241:k3=\242:\
+ :k4=\243:k5=\244:k6=\245:k7=\246:k8=\247:k9=\250:k;=\251:\
+ :kB=^]:kD=\177:kI=\E[^H:kN=\E[U:kP=\E[V:kb=^H:kd=\E[B:\
+ :kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;1H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mk=\E[30;40m:mr=\E[7m:nd=\E[C:\
+ :nw=^M:se=\E[m:sf=\E[S\E[B:so=\E[7m:sr=\E[T\E[A:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+
+#### Apple II
+#
+# Apple II firmware console first, then various 80-column cards and
+# terminal emulators. For two cents I'd toss all these in the UFO file
+# along with the 40-column apple entries.
+#
+
+# From: [email protected] (Brian R. Smith) via BRL
+# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
+# function of TIC, not the firmware.
+# The clear key on a IIgs will do something like clear-screen,
+# depending on what you're in.
+appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface:\
+ :am:bs:bw:eo:ms:\
+ :co#80:it#8:li#24:\
+ :bl=^G:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:ho=^Y:\
+ :kC=^X:kD=\177:kb=^H:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:nd=^\:\
+ :nw=^M^W:se=^N:sf=^W:so=^O:sr=^V:ta=^I:up=^_:
+# Apple //e with 80-column card, entry from BRL
+# The modem interface is permitted to discard LF (maybe DC1), otherwise
+# passing characters to the 80-column firmware via COUT (PR#3 assumed).
+# Auto-wrap does not work right due to newline scrolling delay, which also
+# requires that you set "stty cr2".
+# Note: Cursor addressing is only available via the Pascal V1.1 entry,
+# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
+# using a terminal emulation program instead of the built-in firmware.
+apple2e|Apple //e:\
+ :bw:ms:\
+ :co#80:li#24:\
+ :bl=^G:cd=4*\013:ce=4\035:cl=100\014:do=^J:ho=^Y:is=^R^N:\
+ :kb=^H:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:me=^N:mr=^O:nw=100\r:\
+ :r1=^R^N:se=^N:sf=^W:so=^O:sr=^V:ta=^I:up=^_:
+# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
+# 4.20, with incoming and outgoing terminals both on 0, emulation On.
+apple2e-p|Apple //e via Pascal:\
+ :cm=\036%r%+ %+ :kb=^H:kd=^J:kl=^H:tc=apple2e:
+# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
+# Enable DC3/DC1 flow control with "stty ixon -ixany".
+apple-ae|ASCII Express:\
+ :am:bs:bw:ms:nx:xo:\
+ :co#80:it#8:li#24:\
+ :bl=500\007:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :cr=^M:do=^J:\
+ :ho=^Y:is=^R^N:kC=^X:kd=^J:kl=^H:kr=^U:ku=^K:le=^H:me=^N:\
+ :mr=^O:nd=^U:r1=^R^N:se=^N:sf=^W:so=^O:sr=^V:up=^_:
+appleII|apple ii plus:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :do=^J:ho=\E^Y:\
+ :is=\024T1\016:kd=^J:kr=^U:le=^H:me=^N:nd=^\:se=^N:so=^O:\
+ :ta=^I:up=^_:vb=\024G1\024T1:ve=^TC2:vs=^TC6:
+# Originally by Gary Ford 21NOV83
+# From: <ee178aci%[email protected]> Fri Oct 11 21:27:00 1985
+apple-80|apple II with smarterm 80 col:\
+ :am:bs:bw:\
+ :co#80:li#24:\
+ :bt=^R:cd=10*\013:ce=10\035:cl=10*\014:cm=\036%r%+ %+ :\
+ :cr=10*\r:do=^J:ho=^Y:le=^H:nd=^\:up=^_:
+apple-soroc|apple emulating soroc 120:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cd=\EY:ce=\ET:cl=300\E*:cm=\E=%+ %+ :cr=^M:do=^J:\
+ :ho=^^:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
+# From Peter Harrison, Computer Graphics Lab, San Francisco
+# ucbvax!ucsfmis!harrison .....uucp
+# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
+# "These two work. If you don't have the inverse video chip for the
+# Apple with videx then remove the :so: and :se: fields."
+# (apple-videx: this used to be called DaleApple -- esr)
+apple-videx|Apple with videx videoterm 80 column board with inverse video:\
+ :am:bs:xn:\
+ :co#80:it#8:li#24:\
+ :cd=^K:ce=^]:cl=300\014:cm=\036%r%+ %+ :do=^J:ho=^Y:kd=^J:\
+ :kh=^Y:kl=^H:kr=^U:le=^H:me=^Z2:nd=^\:se=^Z2:so=^Z3:ta=^I:\
+ :up=^_:
+# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
+# Apple Cat ][ 212 modem, + more all
+# controlled by ASCII Express: Pro.
+# From Dave Shaver <isucs1!shaver>
+apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell:\
+ :am:bs:eo:xt:\
+ :co#80:li#24:\
+ :ac=:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\
+ :is=^V4^W06\017\rVisible Bell Installed.\016\r\n:\
+ :nd=^\:se=^N:so=^O:up=^_:vb=^W35^W06:
+apple-uterm|Ultraterm for Apple micros:\
+ :am:bs:eo:xt:\
+ :co#80:li#24:\
+ :ac=:cd=^K:ce=^]:cl=^L:cm=\036%r%+ %+ :ho=^Y:\
+ :is=^V4^W06\016:nd=^\:se=^N:so=^O:up=^_:
+# from trwrba!bwong (Bradley W. Wong):
+#
+# This entry assumes that you are using an apple with the UCSD Pascal
+# language card. SYSTEM.MISCINFO is assumed to be the same as that
+# supplied with the standard apple except that screenwidth should be set
+# using SETUP to 80 columns. Note that the right arrow is not mapped in
+# this termcap entry. This is because that key, on the Apple, transmits
+# a ^U and would thus preempt the more useful "up" function of vi.
+#
+# HMH 2/23/81
+apple80p|80-column apple with Pascal card:\
+ :am:bw:\
+ :co#80:li#24:\
+ :cd=^K:ce=^]:cl=^Y^L:cm=\036%r%+ %+ :ho=^Y:kl=^H:nd=^\\072:\
+ :up=^_:
+#
+# Apple II+ equipped with Videx 80 column card
+#
+# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
+# manually converted by D A Gwyn
+#
+# DO NOT use any terminal emulation with this data base, it works directly
+# with the Videx card. This has been tested with vi 1200 baud and works fine.
+#
+# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
+# 1 screen, while in R2 ^U doesn't.
+# For inverse alternate character set add:
+# :as:=^O::ae:=^N:
+# (apple-v: added it#8 -- esr)
+apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520):\
+ :am:xn:\
+ :co#80:it#8:li#24:\
+ :bl=100\007:cd=16*\013:ce=^]:cl=16*\014:cm=\036%r%+ %+ :\
+ :cr=^M:do=^J:ho=^Y:kb=^H:kd=^J:kh=^Y:kl=^H:kr=^\:ku=^_:le=^H:\
+ :nd=^\:se=^Z2:sf=^J:so=^Z3:ta=8\011:up=^_:
+apple-videx3|vapple|Apple II with 80 col card:\
+ :am:bs:\
+ :co#80:li#24:\
+ :ce=\Ex:cl=\Ev:cm=\EY%+ %+ :do=\EB:ho=\EH:k0=\EP:k1=\EQ:\
+ :k2=\ER:k3=\E\040:k4=\E!:k5=\E":k6=\E#:k7=\E$:k8=\E%%:\
+ :k9=\E&:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=\ED:nd=\EC:\
+ :up=\EA:
+#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
+aepro|Apple II+ running ASCII Express Pro--vt52:\
+ :bs:\
+ :co#80:li#24:\
+ :cd=\EJ:ce=\EK:cl=300\014:cm=\EY%+ %+ :do=\EB:ho=\EH:\
+ :le=\ED:nd=\EC:up=\EA:
+# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
+apple-vm80|ap-vm80|apple with viewmax-80:\
+ :bs:\
+ :co#80:li#24:\
+ :cd=300\013:ce=^]:cl=300\014:cm=100\036%+ %+ :ho=200\031:\
+ :nd=^\\072:up=^_:
+
+#### Apple Lisa & Macintosh
+#
+
+# (lisa: changed :vs: to :ve: -- esr)
+lisa|apple lisa console display (black on white):\
+ :am:bs:eo:ms:\
+ :co#88:it#8:li#32:\
+ :ac=jdkclfmenbqattuvvuwsx`:ae=\E[10m:al=\E[L:as=\E[11m:\
+ :cd=\E[J:ce=\E[K:cl=^L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:\
+ :do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=\E>\E[m\014:kb=^H:\
+ :kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:\
+ :se=\E[m:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[5l:\
+ :vi=\E[5h:
+liswb|apple lisa console display (white on black):\
+ :is=\E>\E[0;7m\014:se=\E[0;7m:so=\E[m:ue=\E[0;7m:\
+ :us=\E[4m:tc=lisa:
+
+# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
+# :is: revised by Ferd Brundick <[email protected]>
+#
+# These entries assume that the 'Auto Wraparound' is enabled.
+# Xon-Xoff flow control should also be enabled.
+#
+# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
+# settings are in non-volatile memory and don't need to be reset upon login.
+# Also setting the number of columns glitches the screen annoyingly.
+# You can type "reset" to get them set.
+#
+lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation:\
+ :am:bs:pt:xn:xo:\
+ :co#80:it#8:kn#4:li#24:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bl=^G:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:do=^J:ho=\E[H:k0=\EOP:k1=\EOQ:\
+ :k2=\EOR:k3=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=F1:l1=F2:l2=F3:l3=F4:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\
+ :r1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r:\
+ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\E[m:up=\E[A:us=\E[4m:
+# Lisaterm in 132 column ("wide") mode.
+lisaterm-w|Apple Lisa with Lisaterm in 132 column mode:\
+ :co#132:\
+ :kb=^H:kd=^J:kl=^H:tc=lisaterm:
+# Although MacTerminal has insert/delete line, it is commented out here
+# since it is much faster and cleaner to use the "lock scrolling region"
+# method of inserting and deleting lines due to the MacTerminal implementation.
+# Also, the "Insert/delete ch" strings have an extra character appended to them
+# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
+# supported by MacTerminal.
+mac|macintosh|Macintosh with MacTerminal:\
+ :xn:\
+ :dN#30:\
+ :dc=7\E[P:ei=:ic=9\E[@:im=:ip=7:mb@:tc=lisa:
+# Lisaterm in 132 column ("wide") mode.
+mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode:\
+ :co#132:tc=mac:
+
+# nsterm*|Apple_Terminal - AppKit Terminal.app
+#
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
+# Server and Mac OS X operating systems. There is also a
+# "terminal.app" in GNUStep, but I believe it to be an unrelated
+# codebase and I have not attempted to describe it here.
+#
+# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
+# You might also try "nsterm-7" and "nsterm-old" if you suspect your
+# version supports color.
+#
+# To determine the version of Terminal.app you're using by running:
+#
+# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
+#
+# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
+#
+# For Apple_Terminal v71+/v100+, use "nsterm-bce".
+#
+# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
+#
+# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
+#
+# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
+# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
+# might work too, but really you're on your own here since these
+# systems are very obsolete and I can't test them. I do welcome
+# patches, though :).
+
+# Other Terminals:
+#
+# For GNUstep_Terminal, you're probably best off using "linux" or
+# writing your own terminfo.
+
+# For MacTelnet, you're on your own. It's a different codebase, and
+# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
+
+# For iTerm.app, see "iterm".
+
+#
+# The AppKit Terminal.app descriptions all have names beginning with
+# "nsterm". Note that the statusline (-s) versions use the window
+# titlebar as a phony status line, and may produce warnings during
+# compilation as a result ("tsl uses 0 parameters, expected 1".)
+# Ignore these warnings, or even ignore these entries entirely. Apps
+# which need to position the cursor or do other fancy stuff inside the
+# status line won't work with these entries. They're primarily useful
+# for programs like Pine which provide simple notifications in the
+# status line. Please note that non-ASCII characters don't work right
+# in the status line, since Terminal.app incorrectly interprets their
+# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
+# versions) or only accepts status lines consisting entirely of
+# characters from the first 256 Unicode positions (including C1 but
+# not C0 or DEL.)
+#
+# The Mythology* of AppKit Terminal.app:
+#
+# In the days of NeXTSTep 0.x and 1.x there were two incompatible
+# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
+# shareware replacement for Terminal called "Stuart" which NeXT bought
+# and used as the basis for the Terminal.app in NeXTstep 2+,
+# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
+# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
+# capabilities for the early versions, but I believe that the
+# TERM_PROGRAM_VERSION may have been reset at some point.
+#
+# The early versions were tailored to the NeXT character set. Sometime
+# after the Apple aquisition the encoding was swiched to MacRoman
+# (initally with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Alos sometime during
+# or just prior to the early days of Mac OS X, the Terminal grew ANSI
+# 8-color support (initially buggy when combined with attributes, but
+# that was later fixed.) More recently, around Mac OS X version 10.3
+# or so (Terminal.app v100+) xterm-like 16-color support was added. In
+# some versions (for instance 133-1 which shipped with Mac OS X
+# version 10.4) this suffered from the <bce> bug, but that seems to
+# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
+#
+# In the early days of Mac OS X the terminal was fairly buggy and
+# would routinely crash under load. Many of these bugs seem to have
+# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
+# some may still remain. This change seems to correspond to
+# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
+# it did previously.
+#
+# * This may correspond with what actually happened, but I don't
+# know. It is based on guesswork, hearsay, private correspondence,
+# my faulty memory, and the following online sources and references:
+#
+# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
+# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
+#
+# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
+# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
+#
+# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
+# "nsterm" to comply with the name length and case conventions and
+# limitations of various software packages [notably Solaris terminfo
+# and UNIX.] A single Apple_Terminal alias is retained for
+# backwards-compatbility.
+#
+# * Added function key support (F1-F4). These only work in Terminal.app
+# version 51, hopefully the capabilities won't cause problems for people
+# using version 41.
+#
+# * Added "full color" (-c) entries which support the 16-color mode in
+# version 51.
+#
+# * By default, version 51 uses UTF-8 encoding with broken altcharset
+# support, so "ASCII" (-7) entries without altcharset support were
+# added.
+
+# nsterm - AppKit Terminal.app
+#
+# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
+# Terminal.app. It is a partial VT100 emulation with some xterm-like
+# extensions. This terminfo was written to describe versions 41
+# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
+# version 10.1) of Terminal.app.
+#
+# Terminal.app runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems.) On the Mac OS X machine I
+# use, the executable for Terminal.app is:
+# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
+#
+# If you're looking for a description of the full-screen system
+# console which runs under Apple's Darwin operating system on PowerPC
+# platforms, see the "xnuppc" entry instead.
+#
+# There were no function keys in version 41. In version 51, there are
+# four working function keys (F1, F2, F3 and F4.) The function keys
+# are included in all of these entries.
+#
+# It does not support mouse pointer position reporting. Under some
+# circumstances the cursor can be positioned using option-click; this
+# works by comparing the cursor position and the selected position,
+# and simulating enough cursor-key presses to move the cursor to the
+# selected position. This technique fails in all but the simplest
+# applications.
+#
+# It provides partial ANSI color support (background colors interacted
+# badly with bold in version 41, though, as reflected in :ncv:.) The
+# monochrome (-m) entries are useful if you've disabled color support
+# or use a monochrome monitor. The full color (-c) entries are useful
+# in version 51, which doesn't exhibit the background color bug. They
+# also enable an xterm-compatible 16-color mode.
+#
+# The configurable titlebar is set using xterm-compatible sequences;
+# it is used as a status bar in the statusline (-s) entries. Its width
+# depends on font sizes and window sizes, but 50 characters seems to
+# be the default for an 80x24 window.
+#
+# The MacRoman character encoding is used for some of the alternate
+# characters in the "MacRoman" entries; the "ASCII" (-7) entries
+# disable alternate character set support entirely, and the "VT100"
+# (-acs) entries rely instead on Terminal.app's own buggy VT100
+# graphics emulation, which seems to think the character encoding is
+# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
+# are useful in Terminal.app version 51, which supports UTF-8 and
+# other ASCII-compatible character encodings but does not correctly
+# implement VT100 graphics; once VT100 graphics are correctly
+# implemented in Terminal.app, the "VT100" (-acs) entries should be
+# usable in any ASCII-compatible character encoding [except perhaps
+# in UTF-8, where some experts argue for disallowing alternate
+# characters entirely.]
+#
+# Terminal.app reports "vt100" as the terminal type, but exports
+# several environment variables which may aid detection in a shell
+# profile (i.e. .profile or .login):
+#
+# TERM=vt100
+# TERM_PROGRAM=Apple_Terminal
+# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
+# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
+#
+# For example, the following Bourne shell script would detect the
+# correct terminal type:
+#
+# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
+# then
+# export TERM
+# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
+# then
+# TERM="nsterm-old"
+# else
+# TERM="nsterm-c-7"
+# fi
+# fi
+#
+# In a C shell derivative, this would be accomplished by:
+#
+# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
+# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
+# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
+# setenv TERM "nsterm-old"
+# else
+# setenv TERM "nsterm-c-7"
+# endif
+# endif
+# endif
+
+# The '+' entries are building blocks
+nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset:\
+ :am:bw:ms:xn:xo:\
+ :co#80:it#8:li#24:\
+ :@8=\EOM:AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:al=\E[L:bl=^G:\
+ :cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dl=\E[M:do=^J:ho=\E[H:\
+ :kb=\177:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:\
+ :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\
+ :mk=\E[8m:mr=\E[7m:nd=\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
+ :sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
+ :us=\E[4m:tc=vt100+enq:tc=vt100+pfkeys:
+
+nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:as=^N:eA=\E(B\E)0:me=\E[0m:tc=nsterm+7:
+
+nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset:\
+ :ac=+\335,\334-\366.\3770#`\327a\072f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245:\
+ :ae=^O:as=^N:eA=\E(B\E)0:me=\E[0m:tc=nsterm+7:
+
+nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support:\
+ :hs:\
+ :ws#50:\
+ :ds=\E]2;\007:fs=^G:ts=\E]2;:
+
+nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors):\
+ :op=\E[0m:tc=ibm+16color:
+
+nsterm+c41|AppKit Terminal.app v41 color support:\
+ :Co#8:NC#37:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[0m:
+
+# These are different combinations of the building blocks
+
+# ASCII charset (-7)
+nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome):\
+ :tc=nsterm+7:
+
+nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline):\
+ :tc=nsterm+s:tc=nsterm+7:
+
+nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color):\
+ :tc=nsterm+c41:tc=nsterm+7:
+
+nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color):\
+ :tc=nsterm+c:tc=nsterm+7:
+
+nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline):\
+ :tc=nsterm+s:tc=nsterm+c41:tc=nsterm+7:
+
+nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline):\
+ :tc=nsterm+s:tc=nsterm+c:tc=nsterm+7:
+
+# VT100 alternate-charset (-acs)
+nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome):\
+ :tc=nsterm+acs:
+
+nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline):\
+ :tc=nsterm+s:tc=nsterm+acs:
+
+nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color):\
+ :tc=nsterm+c41:tc=nsterm+acs:
+
+nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color):\
+ :tc=nsterm+c:tc=nsterm+acs:
+
+nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline):\
+ :tc=nsterm+s:tc=nsterm+c41:tc=nsterm+acs:
+
+nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline):\
+ :tc=nsterm+s:tc=nsterm+c:tc=nsterm+acs:
+
+# MacRoman charset
+nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome):\
+ :tc=nsterm+mac:
+
+nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline):\
+ :tc=nsterm+s:tc=nsterm+mac:
+
+nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color):\
+ :tc=nsterm+c41:tc=nsterm+mac:
+
+nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color):\
+ :tc=nsterm+c:tc=nsterm+mac:
+
+nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline):\
+ :tc=nsterm+s:tc=nsterm+c41:tc=nsterm+mac:
+
+nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline):\
+ :tc=nsterm+s:tc=nsterm+c:tc=nsterm+mac:
+
+# In Mac OS X version 10.5 the format of the preferences has changed
+# and a new, more complex technique is needed, e.g.,
+#
+# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
+# "NSUserDefaults");ud=NSUserDefaults.alloc();
+# ud.init();prefs=ud.persistentDomainForName_(
+# "com.apple.Terminal");prefs["Window Settings"][
+# prefs["Default Window Settings"]]["TerminalType"
+# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
+# "com.apple.Terminal")' nsterm-16color
+#
+# and it is still not settable from the preferences dialog. This is
+# tracked under rdar://problem/7365108 and rdar://problem/7365134
+# in Apple's bug reporter.
+nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5:\
+ :NP:bw@:mi:\
+ :@7=\E[F:DC=\E[%dP:F1=\E[23~:F2=\E[24~:F3=\E[25~:\
+ :F4=\E[26~:F5=\E[28~:F6=\E[29~:F7=\E[31~:F8=\E[22~:\
+ :F9=\E[33~:FA=\E[34~:IC=\E[%d@:ch=\E[%i%dG:cv=\E[%i%dd:\
+ :dc=\E[P:ei=\E[4l:ic=\E[@:im=\E[4h:k5=\E[15~:k6=\E[17~:\
+ :k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\E[3~:\
+ :kN=\E[6~:kP=\E[5~:kh=\E[H:te=\E[2J\E[?47l\E8:\
+ :ti=\E7\E[?47h:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
+ :tc=nsterm-c-s-acs:
+
+# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
+# the background color erase bug. The newer version 240.2 in Mac OS X
+# version 10.5 does not.
+#
+# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
+# and D P Schreber comparing to nsterm-c-s-acs.
+#
+# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
+# can be set in Terminal.app, e.g.,
+#
+# defaults write com.apple.Terminal TermCapString nsterm-bce
+#
+# and that it is not set in Terminal's preferences dialog.
+nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce):\
+ :bw:ut:tc=nsterm-16color:
+
+# This is an alias which should always point to the "current" version
+nsterm|Apple_Terminal|AppKit Terminal.app:\
+ :tc=nsterm-16color:
+
+# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
+# more featureful) terminal emulator for Mac OS X. It is similar
+# enough in capabilities to nsterm-16color that I have derived this
+# description from that one, but as far as I know they share no code.
+# Many of the features are user-configurable, but I attempt only to
+# describe the default configuration.
+#
+# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
+# disabled.
+iTerm.app|iTerm.app terminal emulator for Mac OS X:\
+ :bw@:cc@:ut:\
+ :@7=\EOF:Ic@:cs@:kh=\EOH:tc=xterm+256color:\
+ :tc=nsterm-16color:
+
+# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
+#
+# On PowerPC platforms, Apple's Darwin operating system uses a
+# full-screen system console derived from a NetBSD framebuffer
+# console. It is an ANSI-style terminal, and is not really VT-100
+# compatible.
+#
+# Under Mac OS X, this is the system console driver used while in
+# single-user mode [reachable by holding down Command-S during the
+# boot process] and when logged in using console mode [reachable by
+# typing ">console" at the graphical login prompt.]
+#
+# If you're looking for a description of the Terminal.app terminal
+# emulator which runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems,) see the "nsterm"
+# entry instead.
+#
+# NOTE: Under Mac OS X version 10.1, the default login window does not
+# prompt for user name, instead requiring an icon to be selected from
+# a list of known users. Since the special ">console" login is not in
+# this list, you must make one of two changes in the Login Window
+# panel of the Login section of System Prefs to make the special
+# ">console" login accessible. The first option is to enable 'Show
+# "Other User" in list for network users', which will add a special
+# "Other..." icon to the graphical login panel. Selecting "Other..."
+# will present the regular graphical login prompt. The second option
+# is to change the 'Display Login Window as:' setting to 'Name and
+# password entry fields', which replaces the login panel with a
+# graphical login prompt.
+#
+# There are no function keys, at least not in Darwin 1.3.
+#
+# It has no mouse support.
+#
+# It has full ANSI color support, and color combines correctly with
+# all three supported attributes: bold, inverse-video and underline.
+# However, bold colored text is almost unreadable (bolding is
+# accomplished using shifting and or-ing, and looks smeared) so bold
+# has been excluded from the list of color-compatible attributes
+# [using (ncv)]. The monochrome entry (-m) is useful if you use a
+# monochrome monitor.
+#
+# There is one serious bug with this terminal emulation's color
+# support: repositioning the cursor onto a cell with non-matching
+# colors obliterates that cell's contents, replacing it with a blank
+# and displaying a colored cursor in the "current" colors. There is
+# no complete workaround at present [other than using the monochrome
+# (-m) entries,] but removing the (msgr) capability seemed to help.
+#
+# The "standout" chosen was simple reverse-video, although a colorful
+# standout might be more aesthetically pleasing. Similarly, the bold
+# chosen is the terminal's own smeared bold, although a simple
+# color-change might be more readable. The color-bold (-b) entries
+# uses magenta colored text for bolding instead. The fancy color (-f
+# and -f2) entries use color for bold, standout and underlined text
+# (underlined text is still underlined, though.)
+#
+# Apparently the terminal emulator does support a VT-100-style
+# alternate character set, but all the alternate character set
+# positions have been left blank in the font. For this reason, no
+# alternate character set capabilities have been included in this
+# description. The console driver appears to be ASCII-only, so (enacs)
+# has been excluded [although the VT-100 sequence does work.]
+#
+# The default Mac OS X and Darwin installation reports "vt100" as the
+# terminal type, and exports no helpful environment variables. To fix
+# this, change the "console" entry in /etc/ttys from "vt100" to
+# "xnuppc-WxH", where W and H are the character dimensions of your
+# console (see below.)
+#
+# The font used by the terminal emulator is apparently one originally
+# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
+# file includes descriptions for the following geometries:
+#
+# Pixels Characters Entry Name (append -m for monochrome)
+# -------------------------------------------------------------------
+# 640x400 80x25 xnuppc-80x25
+# 640x480 80x30 xnuppc-80x30
+# 720x480 90x30 xnuppc-90x30
+# 800x600 100x37 xnuppc-100x37
+# 896x600 112x37 xnuppc-112x37
+# 1024x640 128x40 xnuppc-128x40
+# 1024x768 128x48 xnuppc-128x48
+# 1152x768 144x48 xnuppc-144x48
+# 1280x1024 160x64 xnuppc-160x64
+# 1600x1024 200x64 xnuppc-200x64
+# 1600x1200 200x75 xnuppc-200x75
+# 2048x1536 256x96 xnuppc-256x96
+#
+# The basic "xnuppc" entry includes no size information, and the
+# emulator includes no reporting capability, so you'll be at the mercy
+# of the TTY device (which reports incorrectly on my hardware.) The
+# color-bold entries do not include size information.
+
+# The '+' entries are building blocks
+xnuppc+basic|Darwin PowerPC Console basic capabilities:\
+ :am:mi:ut:xn:\
+ :it#8:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=\E[B:\
+ :ds=\E]2;\007:ho=\E[H:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=\E[D:md=\E[1m:\
+ :me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:\
+ :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:sc=\E7:se=\E[m:\
+ :sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
+ :us=\E[4m:tc=vt100+keypad:
+
+xnuppc+c|Darwin PowerPC Console ANSI color support:\
+ :Co#8:NC#32:pa#64:\
+ :AB=\E[4%dm:AF=\E[3%dm:op=\E[37;40m:
+
+xnuppc+b|Darwin PowerPC Console color-bold support:\
+ :NC#32:\
+ :md=\E[35m:tc=xnuppc+basic:
+
+xnuppc+f|Darwin PowerPC Console fancy color support:\
+ :NC#35:\
+ :so=\E[33;44m:us=\E[36;4m:tc=xnuppc+b:
+
+xnuppc+f2|Darwin PowerPC Console alternate fancy color support:\
+ :NC#35:\
+ :md=\E[33m:so=\E[31;47m:us=\E[34m:tc=xnuppc+basic:
+
+# Building blocks for specific screen sizes
+xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels):\
+ :co#80:li#25:
+
+xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels):\
+ :co#80:li#30:
+
+xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels):\
+ :co#90:li#30:
+
+xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels):\
+ :co#100:li#37:
+
+xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels):\
+ :co#112:li#37:
+
+xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels):\
+ :co#128:li#40:
+
+xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels):\
+ :co#128:li#48:
+
+xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels):\
+ :co#144:li#48:
+
+xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels):\
+ :co#160:li#64:
+
+xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels):\
+ :co#200:li#64:
+
+xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels):\
+ :co#200:li#75:
+
+xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels):\
+ :co#256:li#96:
+
+# These are different combinations of the building blocks
+
+xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome):\
+ :tc=xnuppc+basic:
+
+xnuppc|darwin|Darwin PowerPC Console (color):\
+ :tc=xnuppc+c:tc=xnuppc+basic:
+
+xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold):\
+ :tc=xnuppc+b:
+
+xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold):\
+ :tc=xnuppc+b:tc=xnuppc+c:
+
+xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome):\
+ :tc=xnuppc+f:
+
+xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color):\
+ :tc=xnuppc+f:tc=xnuppc+c:
+
+xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome):\
+ :tc=xnuppc+f2:
+
+xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color):\
+ :tc=xnuppc+f2:tc=xnuppc+c:
+
+# Combinations for specific screen sizes
+xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25:\
+ :tc=xnuppc+80x25:tc=xnuppc+basic:
+
+xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25:\
+ :tc=xnuppc+c:tc=xnuppc+80x25:tc=xnuppc+basic:
+
+xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30:\
+ :tc=xnuppc+80x30:tc=xnuppc+basic:
+
+xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30:\
+ :tc=xnuppc+c:tc=xnuppc+80x30:tc=xnuppc+basic:
+
+xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30:\
+ :tc=xnuppc+90x30:tc=xnuppc+basic:
+
+xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30:\
+ :tc=xnuppc+c:tc=xnuppc+90x30:tc=xnuppc+basic:
+
+xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37:\
+ :tc=xnuppc+100x37:tc=xnuppc+basic:
+
+xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37:\
+ :tc=xnuppc+c:tc=xnuppc+100x37:tc=xnuppc+basic:
+
+xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37:\
+ :tc=xnuppc+112x37:tc=xnuppc+basic:
+
+xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37:\
+ :tc=xnuppc+c:tc=xnuppc+112x37:tc=xnuppc+basic:
+
+xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40:\
+ :tc=xnuppc+128x40:tc=xnuppc+basic:
+
+xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40:\
+ :tc=xnuppc+c:tc=xnuppc+128x40:tc=xnuppc+basic:
+
+xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48:\
+ :tc=xnuppc+128x48:tc=xnuppc+basic:
+
+xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48:\
+ :tc=xnuppc+c:tc=xnuppc+128x48:tc=xnuppc+basic:
+
+xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48:\
+ :tc=xnuppc+144x48:tc=xnuppc+basic:
+
+xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48:\
+ :tc=xnuppc+c:tc=xnuppc+144x48:tc=xnuppc+basic:
+
+xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64:\
+ :tc=xnuppc+160x64:tc=xnuppc+basic:
+
+xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64:\
+ :tc=xnuppc+c:tc=xnuppc+160x64:tc=xnuppc+basic:
+
+xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64:\
+ :tc=xnuppc+200x64:tc=xnuppc+basic:
+
+xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64:\
+ :tc=xnuppc+c:tc=xnuppc+200x64:tc=xnuppc+basic:
+
+xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75:\
+ :tc=xnuppc+200x75:tc=xnuppc+basic:
+
+xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75:\
+ :tc=xnuppc+c:tc=xnuppc+200x75:tc=xnuppc+basic:
+
+xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96:\
+ :tc=xnuppc+256x96:tc=xnuppc+basic:
+
+xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96:\
+ :tc=xnuppc+c:tc=xnuppc+256x96:tc=xnuppc+basic:
+
+#### Radio Shack/Tandy
+#
+
+# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
+# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
+# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
+coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :al=^_0:bl=^G:cd=^K:ce=^D:cl=5*\014:cm=2\002%r%+ %+ :\
+ :dl=^_1:do=^J:ho=^A:kd=^J:kl=^H:kr=^I:ku=^L:le=^H:mb=^_":\
+ :md=\E\072^A:me=\037!\E\072\200:mr=^_\040:nd=^F:se=^_!:\
+ :so=^_\040:ue=^_#:up=^I:us=^_":ve=^E!:vi=^E\040:
+# (trs2: removed obsolete ":nl=^_:" -- esr)
+trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M:\
+ :am:bs:ms:\
+ :co#80:it#8:li#24:\
+ :al=^D:bl=^G:cd=^B:ce=^A:cl=^L:cm=\EY%+ %+ :cr=^M:dl=^K:\
+ :do=^_:ho=^F:kb=^H:kd=^_:kl=^\:kr=^]:ku=^^:le=^H:me=^O:nd=^]:\
+ :se=^O:sf=^J:so=^N:ta=^I:up=^^:
+# From: Kevin Braunsdorf <[email protected]>
+# (This had extension capabilities
+# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
+# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
+# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
+trs16|trs-80 model 16 console:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :ac=jak`l_mbquvewcxs:ae=\ERg:al=\EL:as=\ERG:bl=^G:cd=\EJ:\
+ :ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:dc=\EQ:dl=\EM:do=\EB:ei=:\
+ :ho=\EH:ic=\EP:im=:k0=^A:k1=^B:k2=^D:k3=^L:k4=^U:k5=^P:k6=^N:\
+ :k7=^S:kb=^H:kd=\EB:kh=^W:kl=\ED:kr=\EC:ku=\EA:l0=f1:l1=f2:\
+ :l2=f3:l3=f4:l4=f5:l5=f6:l6=f7:l7=f8:le=^H:me=\ER@:nd=\EC:\
+ :pf=\E]+:po=\E]=:se=\ER@:sf=^J:so=\ERD:ta=^I:up=\EA:ve=\ERC:\
+ :vi=\ERc:
+
+#### Commodore Business Machines
+#
+# Formerly located in West Chester, PA; went spectacularly bust in 1994
+# after years of shaky engineering and egregious mismanagement. Made one
+# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
+# C-128, VIC-20). The C-64 is said to have been the most popular machine
+# ever (most units sold); they can still be found gathering dust in closets
+# everywhere.
+#
+
+# From: Kent Polk <[email protected]>, 30 May 90
+# Added a few more entries, converted caret-type control sequence (^x) entries
+# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
+# Corrections by Ty Sarna <[email protected]>, Sat Feb 28 18:55:15 1998
+#
+# :as:, :ae: Support for alternate character sets.
+# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
+# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
+# This one appears to fix a problem I always had with a line ending
+# at 'width+1' (I think) followed by a blank line in vi. The blank
+# line tended to disappear and reappear depending on how the screen
+# was refreshed. Note that this is probably needed only if you use
+# something like a Dnet Fterm with the window sized to some peculiar
+# dimension larger than 80 columns.
+# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
+# (amiga: removed obsolete :kn#10:,
+# also added empty <acsc> to suppress a warning --esr)
+amiga|Amiga ANSI:\
+ :am:bs:bw:xn:\
+ :co#80:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ac=:\
+ :ae=^O:al=\E[L:as=^N:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=:\
+ :ho=\E[H:ic=\E[@:im=:is=\E[20l:k0=\E[9~:k1=\E[0~:k2=\E[1~:\
+ :k3=\E[2~:k4=\E[3~:k5=\E[4~:k6=\E[5~:k7=\E[6~:k8=\E[7~:\
+ :k9=\E[8~:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:\
+ :mb=\E[7;2m:md=\E[1m:me=\E[m:mh=\E[2m:mk=\E[8m:mr=\E[7m:\
+ :nd=\E[C:r1=\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:ue=\E[m:\
+ :up=\E[A:us=\E[4m:ve=\E[ p:vi=\E[0 p:
+
+# From: Hans Verkuil <[email protected]>, 4 Dec 1995
+# (amiga: added empty <acsc> to suppress a warning.
+# I'm told this entry screws up badly with AS225, the Amiga
+# TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
+amiga-h|Hans Verkuil's Amiga ANSI:\
+ :bs:bw:ms:\
+ :co#80:li#24:\
+ :DC=\233%dP:DO=\233%dB:IC=\233%d@:LE=\233%dD:RI=\233%dC:\
+ :SF=\233%dS:SR=\233%dT:UP=\233%dA:ac=:ae=^O:as=^N:bl=^G:\
+ :bt=\233Z:cd=\233J:ce=\233K:cl=\233H\233J:\
+ :cm=\233%i%d;%dH:cr=^M:dc=\233P:do=\233B:ec=\233%dP:ei=:\
+ :ho=\233H:ic=\233@:im=:is=\23320l:k0=\2339~:k1=\2330~:\
+ :k2=\2331~:k3=\2332~:k4=\2333~:k5=\2334~:k6=\2335~:\
+ :k7=\2336~:k8=\2337~:k9=\2338~:kD=\177:kb=^H:kd=\233B:\
+ :kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\
+ :md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\
+ :nd=\233C:nw=\233B\r:r1=\Ec:se=\2330m:sf=\233S:so=\2337m:\
+ :sr=\233T:ta=^I:te=\233?7h:ti=\233?7l:ue=\2330m:up=\233A:\
+ :us=\2334m:vb=^G:ve=\233 p:vi=\2330 p:
+
+# From: Henning 'Faroul' Peters <[email protected]>, 25 Sep 1999
+#
+# Pavel Fedin added
+# Home Shift+Left
+# End Shift+Right
+# PgUp Shift+Up
+# PgDn Shift+Down
+amiga-8bit|Amiga ANSI using 8-bit controls:\
+ :@7=\233 @:AL=\233%dL:DL=\233%dM:SF@:SR@:ac=:al=\233L:\
+ :dl=\233M:kN=\233S:kP=\233T:kh=\233 A:sf=\204:sr=\215:\
+ :tc=amiga-h:
+
+# From: Ruediger Kuhlmann <[email protected]>, 18 Jul 2000
+# requires use of appropriate preferences settings.
+amiga-vnc|Amiga using VNC console (black on light gray):\
+ :ND:am:da:db:ms:\
+ :BT#1:Co#16:NC#0:co#80:li#24:lm#0:pa#256:\
+ :%1=\E[?~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:\
+ :IC=\E[%d@:Km=\E[M:LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:\
+ :SR=\E[%dT:UP=\E[%dA:al=\E[1L:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:\
+ :dl=\E[1M:do=\E[B:ei=:ic=\E[@:im=:\
+ :is=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h:\
+ :k0=\E[9~:k1=\E[0~:k2=\E[1~:k3=\E[2~:k4=\E[3~:k5=\E[4~:\
+ :k6=\E[5~:k7=\E[6~:k8=\E[7~:k9=\E[8~:kB=\233Z:kD=\177:\
+ :kH=\E[45~:kN=\E[42~:kP=\E[41~:kb=^H:kd=\E[B:ke=\E[?1l:\
+ :kh=\E[44~:kl=\E[D:kr=\E[C:ks=\E[?1h:ku=\E[A:le=\E[D:\
+ :mb=\E[7;2m:md=\E[1m:me=\E[0m\017\E[30;85;>15m:mh=\E[2m:\
+ :mk=\E8m:mr=\E[7m:nd=\E[C:nw=\EE:oc=\E[0m:r1=\Ec:\
+ :r2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h:\
+ :se=\E[21m:sf=\ED:so=\E[1m:sr=\EM:te=\E[?7h\E[r\E[J:\
+ :ti=\E[?7h:ue=\E[24m:up=\E[A:us=\E[4m:vb=^G:\
+ :ve=\E[p\E[>?6l:vi=\E[0p:vs=\E[>?6h:
+
+# MorphOS on Genesi Pegasos
+# By Pavel Fedin <[email protected]>
+morphos:\
+ :@7=\23345~:AL=\233%dL:DL=\233%dM:F1=\23320~:F2=\23321~:\
+ :SF@:SR@:ac=:al=\233L:dl=\233M:kI=\23340~:kN=\23342~:\
+ :kP=\23341~:kh=\23344~:sf=\204:sr=\215:tc=amiga-h:
+
+# Commodore B-128 microcomputer from Doug Tyrol <[email protected]>
+# I'm trying to write a termcap for a commodore b-128, and I'm
+# having a little trouble. I've had to map most of my control characters
+# to something that unix will accept (my delete-char is a ctrl-t, etc),
+# and create some functions (like cm), but thats life.
+# The problem is with the arrow keys - right, and up work fine, but
+# left deletes the previous character and down I just can't figure out.
+# Jove knows what I want, but I don't know what it's sending to me (it
+# isn't thats bound to next-line in jove).
+# Anybody got any ideas? Here's my termcap.
+# DAG -- I changed his "^n" entries to "\n"; see if that works.
+#
+commodore|b-128|Commodore B-128 micro:\
+ :am:bw:\
+ :co#80:dN#20:li#24:pb#150:\
+ :al=10\Ei:bc=^H:ce=10\Eq:cl=10\E\006:cm=20\E\013%2,%2,:\
+ :cr=^M:dc=10*\177:dl=10*\Ed:do=^J:ei=:ho=\E^E:ic=5\E\n:im=:\
+ :kd=^J:kh=\E^E:kl=^B:kr=^F:ku=^P:nd=^F:nl=^M:ta=5\011:up=^P:
+
+#### North Star
+#
+# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
+northstar|North Star Advantage:\
+ :bs:\
+ :co#80:li#24:\
+ :cd=200\017:ce=200\016:cl=200\004:cm=1\E=%+ %+ :\
+ :ho=200\034\032:
+
+#### Osborne
+#
+# Thu Jul 7 03:55:16 1983
+#
+# As an aside, be careful; it may sound like an anomaly on the
+# Osborne, but with the 80-column upgrade, it's too easy to
+# enter lines >80 columns!
+#
+# I've already had several comments...
+# The Osborne-1 with the 80-col option is capable of being
+# 52, 80, or 104 characters wide; default to 80 for compatibility
+# with most systems.
+#
+# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
+osborne-w|osborne1-w|osborne I in 104-column mode:\
+ :ms:ul:xt:\
+ :co#104:li#24:\
+ :al=\EE:bl=^G:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:dc=\EW:dl=\ER:\
+ :do=^J:ei=:ic=\EQ:im=:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:\
+ :se=\E(:sf=^J:so=\E):ue=\Em:up=^K:us=\El:
+# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
+osborne|osborne1|osborne I in 80-column mode:\
+ :am:bs:mi:ms:ul:xs:\
+ :co#80:dB#4:li#24:\
+ :al=\EE:ce=\ET:cl=^Z:cm=\E=%+ %+ :dc=4\EW:dl=\ER:do=^J:ei=:\
+ :im=\EQ:is=^Z:kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:le=4\010:nd=^L:\
+ :se=\E):so=\E(:ue=\Em:up=^K:us=\El:
+#
+# Osborne Executive definition from BRL
+# Similar to tvi920
+# Added by David Milligan and Tom Smith (SMU)
+osexec|Osborne executive:\
+ :am:bs:\
+ :co#80:li#24:sg#1:ug#1:\
+ :al=\EE:bl=^G:cd=\EY:ce=\ET:cl=^Z:cm=\E=%+ %+ :cr=^M:ct=\E3:\
+ :dc=\EW:dl=\ER:do=^J:ei=:ho=^^:ic=\EQ:im=:\
+ :is=\Eq\Ek\Em\EA\Ex0:k0=^A@\r:k1=^AA\r:k2=^AB\r:k3=^AC\r:\
+ :k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:\
+ :kb=^H:kd=^J:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:nl=^J:se=\Ek:\
+ :so=\Ej:st=\E1:ue=\Em:up=^K:us=\El:
+
+#### Console types for obsolete UNIX clones
+#
+# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
+# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
+# were commercial, Minix an educational tool sold in conjunction with a book.
+# Memory-segmentation limits and a strong tendency to look like V7 long after
+# it was obsolete made all three pretty lame. Venix croaked early. Coherent
+# and Minix were ported to 32-bit Intel boxes, only to be run over by a
+# steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
+# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
+# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
+# even as single processes under SunOS and the Macintosh OS.
+#
+
+# See
+# http://www.minix3.org/manpages/man4/console.4.html
+minix|minix console (v3):\
+ :@7=\E[Y:F1=\E[11;2~:F2=\E[12;2~:F3=\E[13;2~:F4=\E[14;2~:\
+ :F5=\E[15;2~:F6=\E[17;2~:F7=\E[18;2~:F8=\E[19;2~:\
+ :F9=\E[20;2~:FA=\E[21;2~:FB=\E[11;5~:FC=\E[12;5~:\
+ :FD=\E[13;5~:FE=\E[14;5~:FF=\E[15;5~:FG=\E[17;5~:\
+ :FH=\E[18;5~:FI=\E[19;5~:FJ=\E[20;5~:FK=\E[21;5~:\
+ :FL=\E[11;6~:FM=\E[12;6~:FN=\E[13;6~:FO=\E[14;6~:\
+ :FP=\E[15;6~:FQ=\E[17;6~:FR=\E[18;6~:FS=\E[19;6~:\
+ :FT=\E[20;6~:FU=\E[21;6~:\
+ :ac=+\020,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\
+ :k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
+ :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
+ :k;=\E[21~:kD=\177:kI=\E[@:kN=\E[U:kP=\E[V:l0@:l1@:l2@:l3@:\
+ :l4@:l5@:tc=minix-3.0:
+
+minix-3.0|minix console (v3.0):\
+ :tc=ecma+color:tc=minix-1.7:
+
+# See
+# http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
+# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
+minix-1.7|minix console (v1.7):\
+ :am:xn:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cb=\E[2K:\
+ :cd=\E[0J:ce=\E[K:cl=\E[H\E[0J:cm=\E[%i%d;%dH:cr=^M:\
+ :dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:is=\E[0m:\
+ :k0=\E[Y:k1=\E[V:k2=\E[U:k3=\E[T:k4=\E[S:k5=\E[G:kb=^H:\
+ :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:l0=End:l1=PgUp:\
+ :l2=PgDn:l3=Num +:l4=Num -:l5=Num 5:le=^H:mb=\E[5m:\
+ :md=\E[1m:me=\E[0m:mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0m:sf=^J:\
+ :so=\E[7m:sr=\EM:ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
+# Corrected Jan 14, 1997 by Vincent Broman <[email protected]>
+minix-old|minix-1.5|minix console (v1.5):\
+ :xo:\
+ :co#80:it#8:li#25:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:cd=\E[0J:\
+ :ce=\E[K:cl=\E[H\E[0J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k0=\E[Y:k1=\E[V:\
+ :k2=\E[U:k3=\E[T:k4=\E[S:k5=\E[G:kb=^H:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mr=\E[7m:nd=\E[C:nw=^M^J:se=\E[0m:sf=^J:so=\E[7m:sr=\EM:\
+ :ta=^I:ue=\E[0m:up=\E[A:us=\E[4m:
+# The linewrap option can be specified by editing /usr/include/minix/config.h
+# before recompiling the minix 1.5 kernel.
+minix-old-am|minix console with linewrap:\
+ :am:tc=minix-old:
+
+pc-minix|minix console on an Intel box:\
+ :tc=klone+acs:tc=minix-3.0:
+
+# According to the Coherent 2.3 manual, the PC console is similar
+# to a z19. The differences seem to be (1) 25 lines, (2) no status
+# line, (3) standout is broken, (4) ins/del line is broken, (5)
+# has blinking and bold.
+pc-coherent|pcz19|coherent|IBM PC console running Coherent:\
+ :am:mi:\
+ :co#80:it#8:li#25:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:dc=\EN:\
+ :do=\EB:ei=\EO:ho=\EH:im=\E@:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
+ :kr=\EC:ku=\EA:le=^H:me=\Eq:nd=\EC:se=\Eq:sf=^J:so=\Ep:\
+ :sr=\EI:ta=^I:up=\EA:
+
+# According to the Venix 1.1 manual, the PC console is similar
+# to a DEC vt52. Differences seem to be (1) arrow keys send
+# different strings, (2) enhanced standout, (3) added insert/delete line.
+# Note in particular that it doesn't have automatic margins.
+# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
+# not described here because this derives from an old termcap entry.
+pc-venix|venix|IBM PC console running Venix:\
+ :co#80:it#8:li#25:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:\
+ :dl=\EM:do=^J:kb=^H:kd=\EP:kh=\EG:kl=\EK:kr=\EM:ku=\EH:le=^H:\
+ :nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA:
+
+#### Miscellaneous microcomputer consoles
+#
+# If you know anything more about any of these, please tell me.
+#
+
+# The MAI Basic Four computer was obsolete at the end of the 1980s.
+# It may be used as a terminal by putting it in "line" mode as seen on
+# one of the status lines.
+# Initialization is similar to CIT80. :is: will set ANSI mode for you.
+# Hardware tabs set by :if: at 8-spacing. Auto line wrap causes glitches so
+# wrap mode is reset by :vs:. Using :sf:=\E[S caused errors so I
+# used \ED instead.
+# From: [email protected] (David Lawyer), 28 Jun 1997
+mai|basic4|MAI Basic Four in ansi mode:\
+ :am:da:db:mi:ms:\
+ :co#82:it#8:li#25:\
+ :al=\E[L:bl=^G:cd=^_:ce=^^:cl=^]^_:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:dc=\E[1P:dl=\E[M:do=^J:ei=\E[4l:ho=^]:\
+ :if=/usr/share/tabset/vt100:im=\E[4h:\
+ :is=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:\
+ :k8=\EOW:kb=^H:kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=^X:nw=^M\ED:rc=\E8:\
+ :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:up=^Z:\
+ :us=\E[4m:ve=\E[?7h:vs=\E[?7l:
+# basis from Peter Harrison, Computer Graphics Lab, San Francisco
+# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
+#
+# On Sat, 7 Aug 1999, Torsten Jerzembeck <[email protected]> wrote:
+# The Basis 108 was a Apple II clone, manufactured by the "Basis
+# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
+# about 1,5 km from where I live, but doesn't build own computers any
+# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
+# equipped with one or two 5.25" disk drives, had a monochrome and colour
+# video output for a TV set or a dedicated monitor and several slots for
+# Apple II cards. Basis 108 were quite popular at german schools before
+# the advent of the IBM PC. They run, for example, the UCSD Pascal
+# development system (which I used even in 1993 to program the steering
+# and data recording for our school's experimental solar panel :), Apple DOS
+# or CP/M.
+# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
+basis|BASIS108 computer with terminal translation table active:\
+ :cd=\EY:ce=\ET:cl=300\E*:do=5000\n:kb=^H:kd=^J:kl=^H:kr=^L:\
+ :ku=^K:me=\E):se=\E):so=\E(:tc=adm3a:
+# luna's BMC terminal emulator
+luna|luna68k|LUNA68K Bitmap console:\
+ :co#88:li#46:tc=ansi-mini:
+megatek|pegasus workstation terminal emulator:\
+ :am:os:\
+ :co#83:li#60:
+# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
+# interface (pre-Macintosh by several years) that went nowhere.
+xerox820|x820|Xerox 820:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cd=^Q:ce=^X:cl=1^Z:cm=\E=%+ %+ :cr=^M:do=^J:ho=^^:\
+ :le=^H:nd=^L:sf=^J:up=^K:
+
+#### Videotex and teletext
+#
+
+# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
+# \E[?3l 80 columns
+# \E[?4l scrolling on
+# \E[12h local echo off
+# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
+# \E)0 G1 DEC set (line graphics)
+#
+# From: Igor Tamitegama <[email protected]>, 18 Jan 1997
+m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique:\
+ :bs:es:hs:xn:\
+ :co#80:it#8:li#24:sg#0:ug#0:ws#72:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:\
+ :ac=aaffggjjkkllmmnnooqqssttuuvvwwxx:ae=^O:al=\E[L:\
+ :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
+ :fs=^J:ho=\E[H:i1=\E\0721}\Ec\E[?4l\E[12h:\
+ :i2=\E[?3l kbs=\010:im=\E[4h:ip=7:is=\Ec\E[12h\E)0:\
+ :k0=\EOp:k1=\EOq:k2=\EOr:k3=\EOs:k4=\EOt:k5=\EOu:k6=\EOv:\
+ :k7=\EOw:k8=\EOx:k9=\EOy:k;=\EOp:kA=\E[4l:kC=\E[2J:kD=\E[P:\
+ :kI=\E[4h:kL=\E[M:kN=\EOn:kP=\EOR:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=\E[D:ll=\E[24;80H:mb=\E[5m:md=\E[1m:\
+ :me=\E[m:mr=\E[7m:nd=\E[C:nw=^M^J:ps=\E[i:\
+ :r1=\Ec\E[?4l\E[12h:r2=\Ec\E)0:rc=\E8:sc=\E7:se=\E[27m:\
+ :sf=^J:so=\E[7m:sr=\EM:ta=^I:ts=^_@A:u6=\E[%i%d;%dR:\
+ :u7=\E[6n:ue=\E[24m:up=\E[A:us=\E[4m:vb=^G:ve=\E[<1l:\
+ :vi=\E[<1h:
+
+# From: Alexandre Montaron <[email protected]>, 18 Jun 1998
+#
+minitel1|minitel 1:\
+ :am:bw:es:hs:hz:ms:\
+ :Co#8:co#40:li#24:pa#8:\
+ :ac=+.,,./f0g1:bl=^G:ce=^X:cl=^L:cm=\037%+A%+A:cr=^M:do=^J:\
+ :eA=^Y:fs=^J:ho=^^:is=\E;`ZQ\E\072iC\E\072iE\021:le=^H:\
+ :mb=\EH:me=\EI\E\\:mr=\E]:nd=^I:nw=^M^J:op=\EG:\
+ :rp=%.\022%+?:se=\E\\:sf=^J:so=\E]:sr=^K:ts=\037@%+A:up=^K:\
+ :ve=^Q:vi=^T:
+# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
+minitel1b|minitel 1-bistandard (in 40cols mode):\
+ :mi:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:al=\E[L:cb=\E[1K:cd=\E[J:dc=\E[P:\
+ :dl=\E[M:ei=\E[4l:i1=\E;iYA\E;jYC:im=\E[4h:kA=\E[L:\
+ :kC=\E[2J:kD=\E[P:kE=^X:kI=\E[4h:kL=\E[M:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ks=\E;iYA\E;jYC:kt=^I:ku=\E[A:\
+ :tc=minitel1:
+# :ke: posait des problemes (logout en sortant de vi).
+minitel1b-80|minitel 1-bistandard (standard teleinformatique):\
+ :am@:bw@:hz@:\
+ :Co@:co#80:it#8:pa@:\
+ :@8=\EOM:Sf@:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:ho=\E[H:\
+ :i1@:is@:k0=\EOp:k1=\EOq:k2=\EOr:k3=\EOs:k4=\EOt:k5=\EOu:\
+ :k6=\EOv:k7=\EOw:k8=\EOx:k9=\EOy:ke@:ks@:mb=\E[5m:md=\E[1m:\
+ :me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:op@:rc=\E8:rp@:sc=\E7:\
+ :se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:\
+ :us=\E[4m:ve=\037@A\021\n:vi=\037@A\024\n:tc=minitel1b:
+
+######## OBSOLETE VDT TYPES
+#
+# These terminals are *long* dead -- these entries are retained for
+# historical interest only.
+
+#### Amtek Business Machines
+#
+
+# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
+# but these caps were commented out in 8.3; also, removed overridden
+# ":do=^J:" -- esr)
+abm80|amtek business machines 80:\
+ :am:bs:bw:\
+ :co#80:li#24:\
+ :al=\E^Z:bt=^T:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E\021%r%+ %+ :\
+ :dl=\E^S:do=\E^K:ho=\E^R:le=^H:nd=^P:up=\E^L:
+
+#### Bell Labs blit terminals
+#
+# These were AT&T's official entries. The 5620 FAQ maintained by
+# David Breneman <[email protected]> has this to say:
+#
+# Actually, in the beginning was the Jerq, and the Jerq was white with a
+# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
+# was good. But lo, upon the horizon loomed a mighty management-type person
+# (known now only by the initials VP) who said, the mighty Jerq must stay
+# alone, and could not go forth into the world. So Locanthi and Pike put the
+# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
+# world. And the Jerq lived the rest of its days in research, but never
+# strayed from those paths.
+#
+# In all seriousness, the Blit was originally known as the Jerq, but when
+# it started to be shown outside of the halls of the Bell Labs Research
+# organization, the management powers that be decided that the name could
+# not remain. So it was renamed to be Blit. This was in late 1981.
+#
+# (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
+# 730, and 730+.)
+#
+
+blit|jerq|blit running teletype rom:\
+ :am:eo:ul:xo:\
+ :co#87:it#8:li#72:\
+ :AL=\EF%+ :DC=\Ee%+ :DL=\EE%+ :IC=\Ef%+ :al=\EF!:bl=^G:\
+ :ce=\EK:cl=^L:cm=\EY%r%+ %+ :cr=^M:dc=\Ee!:dl=\EE!:do=^J:\
+ :ei=:ic=\Ef!:im=:k1=\Ex:k2=\Ey:k3=\Ez:kb=^H:kd=\EB:kl=\ED:\
+ :kr=\EC:ku=\EA:le=\ED:nd=\EC:sf=^J:ta=^I:up=\EA:
+
+# (cbblit: here's a BSD termcap that says :do=\EG: -- esr)
+cbblit|fixterm|blit running columbus code:\
+ :co#88:\
+ :cd=\EJ:ei=\ER:ic@:im=\EQ:pO=\EP%3:pf=^T:po=^R:se=\EV!:\
+ :so=\EU!:ue=\EV":us=\EU":vb=\E^G:tc=blit:
+
+oblit|ojerq|first version of blit rom:\
+ :am:da:db:eo:mi:ul:xo:\
+ :co#88:it#8:li#72:\
+ :AL=\Ef%+ :DL=\Ee%+ :al=\EF:bl=^G:cd=\EJ:ce=\EK:cl=^L:\
+ :cm=\EY%r%+ %+ :cr=^M:dc=\EO:dl=\EE:do=^J:ei=\ER:im=\EQ:\
+ :kb=^H:le=\ED:nd=\EC:sf=^J:ta=^I:up=\EA:vb=\E^G:
+
+#### Bolt, Beranek & Newman (bbn)
+#
+# The BitGraph was a product of the now-defunct BBN Computer Corporation.
+# The parent company, best known as the architects of the Internet, is
+# still around.
+#
+# Jeff DelPapa <[email protected]> writes:
+# The bitgraph was a large white box that contained a monochrome bitmap
+# display, and a 68000 to run it. You could download code and run it on
+# the cpu, it had 128kb (I think) of memory. I used one in the late
+# 70's, sure beat a vt100. It had one strange feature tho -- it used
+# the cpu to bitblt pixels to scroll, it took longer than the refresh
+# rate, and looked like a rubber sheet stretching, then snapping
+# upwards. It had everything the early mac had, except a floppy drive a
+# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
+# Beranek and Neuman) sold at most a few hundred of them to the real
+# world. DOD may have bought more...
+#
+
+# Entries for the BitGraph terminals. The problem
+# with scrolling in vi can only be fixed by getting BBN to put
+# smarter scroll logic in the terminal or changing vi or padding
+# scrolls with about 500 ms delay.
+#
+# I always thought the problem was related to the terminal
+# counting newlines in its input buffer before scrolling and
+# then moving the screen that much. Then vi comes along and
+# paints lines in on the bottom line of the screen, so you get
+# this big white gap.
+
+bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video):\
+ :is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg2.0:
+bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video):\
+ :is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg2.0:
+bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init):\
+ :bs:xn:\
+ :co#85:li#64:\
+ :al=2*\E[L:bl=^G:cd=150\E[J:ce=2\E[K:cl=150\E[H\E[J:\
+ :cm=%i\E[%d;%dH:cr=^M:cs=\E[%i%d;%dr:dl=2*\E[M:do=\E[B:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kd=\E[B:ke=\E>:kl=\E[D:\
+ :kr=\E[C:ks=\E=:ku=\E[A:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:\
+ :me=\E[m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=280\n:so=\E[7m:\
+ :ta=^I:up=\E[A:
+
+bg1.25rv|bbn bitgraph 1.25 (reverse video):\
+ :is=\E>\E[?5h\E[?7h:vb=\E[?5l\E[?5h:tc=bg1.25:
+bg1.25nv|bbn bitgraph 1.25 (normal video):\
+ :is=\E>\E[?5l\E[?7h:vb=\E[?5h\E[?5l:tc=bg1.25:
+# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
+bg1.25|bbn bitgraph 1.25:\
+ :co#85:li#64:\
+ :RA=\E[?7l:SA=\E[?7h:al=2*\E[L:bl=^G:cd=150\E[J:ce=2\E[K:\
+ :cl=150\E[H\E[J:cm=%i\E[%d;%dH:cr=^M:dl=2*\E[M:do=\E[B:\
+ :k1=\EP:k2=\EQ:k3=\ER:k4=\ES:kd=\EB:ke=\E>:kl=\ED:kr=\EC:\
+ :ks=\E=:ku=\EA:l1=PF1:l2=PF2:l3=PF3:l4=PF4:le=^H:\
+ :ll=\E[64;1H:me=\E[m:nd=\E[C:se=\E[m:sf=280\n:so=\E[7m:\
+ :ta=^I:up=\E[A:
+
+#### Bull (bq, dku, vip)
+#
+# (Adapted for terminfo; AIX extension capabilities translated -- esr)
+
+#============================================#
+# BULL QUESTAR 210 `SDP' terminals emulation #
+#============================================#
+#
+# Description written by R.K.Saunders (Bull Transac)
+#
+# Modifications written by F. Girard (Bull MTS)
+# 19-05-87 V02.00.01
+# 17-12-87 V02.00.02
+# 15-09-89 V02.00.05
+#
+# Typical technical selections F1 (modes SDP/ROLL):
+# -------------------------------------------------------
+# | 01 02 03 04 05 06 07 08 09 10 |
+# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
+# | |
+# | 11 12 13 14 15 16 17 18 19 20 |
+# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
+# | |
+# | 21 22 23 24 25 26 27 28 29 30 |
+# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
+# | |
+# | 31 32 33 34 35 36 37 38 39 40 |
+# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
+# -------------------------------------------------------
+# Typical firmware identification F5 "etat 6":
+# P287.02.04b (AZERTY)
+# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
+# P298.03.03 (monochrome) or P374.03.02 (colour)
+#
+# SM SDP mode (VIP command): ^[[?=h
+# RIS (erases screen): ^[c
+# DMI disable keyboard: ^[`
+# SM double rendition mode: ^[[?>h
+# RM solicited status mode: ^[[5l
+# RM character mode: ^[[>l
+# RM echoplex mode: ^[[12l
+# RM column tab mode: ^[[18l
+# RM forbid SS2 keyboard mode: ^[[?<l
+# SM scroll mode: ^[[=h
+# FCF enable XON/XOFF: ^[P1s^[\
+# MTL select end msg character: ^[[^Wp
+# EMI enable keyboard: ^[b
+# RIS retour etat initial: ^[c
+# enable FC keypad: ^[[?<h,
+# MPW map status line window: ^[PY99:98^[\
+# SCP select status line: ^[[0;98v
+# ED erase entire partition: ^[[2J
+# SCP select main partition: ^[[v
+# SM character insertion mode: ^[[4h
+# RM character replacement mode: ^[[4l
+# COO cursor on: ^[[r
+# COO cursor off: ^[[1r
+# SGR dim (turquoise) rev attr: ^[[2;7m
+# SGR Data normal attr: ^[[m
+# SO Line-graphic mode ON: ^N
+# SI Line-graphic mode OFF: ^O
+# MC start routing to printer: ^[[5i
+# MC stop routing to printer: ^M^[[4i
+#
+
+# This entry covers the following terminals:
+# dku7102, tws2102, and tws models 2105 to 2112
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+tws-generic|dku7102|Bull Questar tws terminals:\
+ :am:es:hs:mi:ms:xn:xo:xs@:\
+ :co#80:it#8:li#24:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:\
+ :cl=\E[2J:cm=\E[%i%d;%df:cr=^M:ct=\E[3g:dc=\E[P:dl=\E[M:\
+ :do=^J:ds=\EPY99\07298\E\\\E[0;98v\E[2J\E[v:ei=\E[4l:\
+ :fs=\E[v:ho=\E[H:i1=\E[?=h\Ec\E`\E[?>h\EPY99\07298\E\\:\
+ :i2=\Eb\E[?<h:im=\E[4h:\
+ :is=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p:\
+ :k1=\E[1u\027:k2=\E[2u\027:k3=\E[3u\027:k4=\E[4u\027:\
+ :k5=\E[5u\027:k6=\E[6u\027:k7=\E[7u\027:k8=\E[8u\027:\
+ :kD=\E[P:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:ll=\E[H\E[A:mb=\E[0;5m:me=\E[0m\017:mh=\E[0;2m:\
+ :mr=\E[0;7m:nd=\E[C:rs=\E[?=h\Ec:se=\E[m:sf=^J:so=\E[0;7m:\
+ :st=\EH:ta=\E[I:te=\E[0;98v\E[2J\E[v:\
+ :ti=\E[?>h\EPY99\07298\E\\:\
+ :ts=\EPY99\07298\E\\\E[0;98v\E[2;7m:ue=\E[m:up=\E[A:\
+ :us=\E[0;4m:ve=\E[r:vi=\E[1r:
+tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA:\
+ :ds=\E[0;98v\E[2J\E[v:fs=\E[v:i2=\Eb:ts=\E[0;98v:\
+ :tc=tws-generic:
+tws2103|xdku|BULL Questar tws2103:\
+ :ta=^I:tc=tws-generic:
+tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA:\
+ :ta=^I:tc=tws2102-sna:
+dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6):\
+ :AL@:DL@:al@:ce=\E[K\E[m:cl=\E[2J\E[H:cm@:dl@:\
+ :ds=\EPY99\07298\E\\\E[0;98v\E[2J\E[H\E[v:\
+ :ts=\EPY99\07298\E\\\E[0;98v\E[H\E[2;7m:\
+ :tc=tws-generic:
+dku7202|BULL Questar 200 DKU7202 (colour/character attributes):\
+ :i2=\E[?3h\Eb:mb=\E[0;2;4m:mh=\E[0;5m:so=\E[0;4;5;7m:\
+ :ta=^I:us=\E[0;2m:tc=tws-generic:
+
+#=========================================================#
+# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
+#=========================================================#
+#
+# Description written by J. Staerck (BULL SA)
+# Copyright (c) 1989 BULL SA
+#---------------------------------------------------------------------------
+# This entry is used for terminals with vt320 emulation mode
+# and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 7 bit Control Characters,
+# 80 columns screen.
+# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
+# They are used in string capabilities with vt220-320 emulation mode.
+# In the following DEC definitions, two kinds of terminfo databases are
+# provided :
+# 1. the first with Command Sequence Introducer starting with escape
+# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
+# 2. the second with Command Sequence Introducer starting with escape
+# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
+# Soft Terminal Reset esc [ ! p
+# RIS (erases screen): esc c
+# DECKPNM numeric keypad mode: esc >
+# DECKPAM applic. keypad mode: esc =
+# DECSTBM Scrolling region: esc [ r
+# SCS select G0 = US: esc ( B
+# SCS select G1 = line-graphic: esc ) 0
+# Select 7-bit C1 controls: esc sp F
+# Select 8-bit C1 controls: esc sp G
+# Select cursor home: esc [ H
+# Select erase screen: esc [ J
+# SM KAM lock keyboard: esc [ 2 h
+# RM KAM unlock keyboard: esc [ 2 l
+# SM SRM local echo off: esc [ 1 2 h
+# RM SRM local echo on: esc [ 1 2 l
+# SM LNM New line : esc [ 2 0 h
+# RM LNM return = CR only: esc [ 2 0 l
+# SM DECCKM cursor keys mode: esc [ ? 1 h
+# RM DECCKM appli. keys mode: esc [ ? 1 l
+# SM DECANM ANSI mode on: esc [ ? 2 h
+# RM DECANM ANSI mode off: esc [ ? 2 l
+# SM DECCOLM 132-column screen: esc [ ? 3 h
+# RM DECCOLM 80-column screen: esc [ ? 3 l
+# SM DECSCLM Smooth scroll: esc [ ? 4 h
+# RM DECSCLM Jump scroll: esc [ ? 4 l
+# SM DECSCNM screen light backgr. esc [ ? 5 h
+# RM DECSCNM screen dark backgr. esc [ ? 5 l
+# SM DECOM move within margins: esc [ ? 6 h
+# RM DECOM move outside margins: esc [ ? 6 l
+# SM DECAWM auto right margin: esc [ ? 7 h
+# RM DECAWM auto right margin: esc [ ? 7 l
+# SM DECARM auto repeat: esc [ ? 8 h
+# RM DECARM auto repeat: esc [ ? 8 l
+# DECSASD Select active main: esc [ 0 $ }
+# DECSASD Select active status: esc [ 1 $ }
+# DECSSDT Select status none: esc [ 0 $ ~
+# DECSSDT Select status indic.: esc [ 1 $ ~
+# DECSSDT Select status host-wr: esc [ 2 $ ~
+# SM DECTCEM Visible cursor: esc [ ? 2 5 h
+# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
+# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
+# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
+# SM DECNKM numeric keypad mode: esc [ ? 6 6 h
+# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
+# SM DECKBUM clavier informatique esc [ ? 6 8 h
+# RM DECKBUM clavier bureautique: esc [ ? 6 8 l
+# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
+# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
+# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
+# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
+# Char. and Line attributes: esc [ Ps ... Ps m
+# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
+# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
+#
+
+# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+bq300|Bull vt320 ISO Latin 1 80 columns terminal:\
+ :am:eo:es:hs:km:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:ws#80:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\
+ :ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:\
+ :ds=\E[1$}\E[2$~\n\E[0$}:ec=\E[%dX:ei=\E[4l:fs=\E[0$}:\
+ :ho=\E[H:i1=\E[63;1"p\E[2h:\
+ :i2=\E[0$}\E[?25h\E[2l\E[H\E[J:im=\E[4h:\
+ :is=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\
+ :k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\
+ :kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\
+ :rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:\
+ :ta=^I:te=\E[?7h:ti=\E[?7l\E[?1l\E(B:ts=\E[1$}\E[2$~:\
+ :ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:\
+ :vi=\E[?25l:
+bq300-rv|Bull vt320 reverse 80 columns:\
+ :is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :vb=\E[?5l\E[?5h:tc=bq300:
+bq300-w|Bull vt320 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :rs=\E[?3h:tc=bq300:
+bq300-w-rv|Bull vt320 reverse mode 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300:
+
+# This entry is used for terminals with vt320 emulation mode
+# and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 8 bit Control Characters, (CSI coded as x9B for ESC [)
+# 80 columns screen.
+# Soft Terminal Reset csi ! p
+# RIS (erases screen): esc c
+# DECKPNM numeric keypad mode: esc >
+# DECKPAM applic. keypad mode: esc =
+# DECSTBM Scrolling region: esc [ r
+# SCS select G0 = US: esc ( B
+# SCS select G1 = line-graphic: esc ) 0
+# Select 7-bit C1 controls: esc sp F
+# Select 8-bit C1 controls: esc sp G
+# Select cursor home: csi H
+# Select erase screen: csi J
+# SM KAM lock keyboard: csi 2 h
+# RM KAM unlock keyboard: csi 2 l
+# SM SRM local echo off: csi 1 2 h
+# RM SRM local echo on: csi 1 2 l
+# SM LNM New line : csi 2 0 h
+# RM LNM return = CR only: csi 2 0 l
+# SM DECCKM cursor keys mode: csi ? 1 h
+# RM DECCKM appli. keys mode: csi ? 1 l
+# SM DECANM ANSI mode on: csi ? 2 h
+# RM DECANM ANSI mode off: csi ? 2 l
+# SM DECCOLM 132-column screen: csi ? 3 h
+# RM DECCOLM 80-column screen: csi ? 3 l
+# SM DECSCLM Smooth scroll: csi ? 4 h
+# RM DECSCLM Jump scroll: csi ? 4 l
+# SM DECSCNM screen light backgr. csi ? 5 h
+# RM DECSCNM screen dark backgr. csi ? 5 l
+# SM DECOM move within margins: csi ? 6 h
+# RM DECOM move outside margins: csi ? 6 l
+# SM DECAWM auto right margin: csi ? 7 h
+# RM DECAWM auto right margin: csi ? 7 l
+# SM DECARM auto repeat: csi ? 8 h
+# RM DECARM auto repeat: csi ? 8 l
+# DECSASD Select active main: csi 0 $ }
+# DECSASD Select active status: csi 1 $ }
+# DECSSDT Select status none: csi 0 $ ~
+# DECSSDT Select status indic.: csi 1 $ ~
+# DECSSDT Select status host-wr: csi 2 $ ~
+# SM DECTCEM Visible cursor: csi ? 2 5 h
+# RM DECTCEM Invisible cursor: csi ? 2 5 l
+# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
+# RM DECNCRM Multi or ISO latin: csi ? 4 2 l
+# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
+# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
+# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
+# Char. and Line attributes: csi Ps ... Ps m
+# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
+# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
+# (bq300-8: :le:,:nd:,:up:,:do:,:dl:,:al: to get under 1024 --esr)
+# (sgr removed to fit entry within 1023 bytes)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+# (some function-key capabilities suppressed to fit entry within 1023 bytes)
+bq300-8|Bull vt320 full 8 bits 80 columns:\
+ :am:eo:es:hs:km:mi:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:ws#80:\
+ :AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\
+ :K1=\217w:K2=\217u:K3=\217y:K4=\217q:K5=\217s:LE=\233%dD:\
+ :RI=\233%dC:UP=\233%dA:ae=^O:as=^N:bl=^G:cd=\233J:ce=\233K:\
+ :cl=\233H\233J:cm=\233%i%d;%dH:cr=^M:cs=\233%i%d;%dr:\
+ :ct=\2333g:dc=\233P:do=\2331B:\
+ :ds=\2331$}\2332$~\n\2330$}:ec=\233%dX:ei=\2334l:\
+ :fs=\2330$}:ho=\233H:i1=\E[63;2"p\E[2h:\
+ :i2=\2330$}\233?25h\2332l\233H\233J:im=\2334h:\
+ :is=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :k1=\217P:k2=\217Q:k3=\217R:k4=\217S:kD=\2333~:kI=\2332~:\
+ :kN=\2336~:kP=\2335~:kb=^H:kd=\233B:ke=\233?1l\E>:\
+ :kl=\233D:kr=\233C:ku=\233A:le=\2331D:mb=\2335m:md=\2331m:\
+ :me=\2330m\E(B:mr=\2337m:nd=\2331C:nw=\EE:rc=\E8:sc=\E7:\
+ :se=\23327m:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:\
+ :te=\233?7h:ti=\233?7l\233?1l\E(B:ts=\2331$}\2332$~:\
+ :ue=\23324m:up=\2331A:us=\2334m:vb=\233?5h\233?5l:\
+ :ve=\233?25h:vi=\233?25l:
+bq300-8rv|Bull vt320 8-bit reverse mode 80 columns:\
+ :is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :vb=\233?5l\233?5h:tc=bq300-8:
+bq300-8w|Bull vt320 8-bit 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :rs=\233?3h:tc=bq300-8:
+bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :rs=\233?3h:vb=\233?5l\233?5h:tc=bq300-8:
+
+# This entry is used for terminals with vt320 emulation mode
+# a 102 keys keyboard (PC scancode !) and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 7 bit Control Characters,
+# 80 columns screen.
+bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns:\
+ :%0@:%1@:*6@:@0@:@7=\E[4~:F1=\E[29~:F2=\E[31~:F3@:F4@:F5@:F6@:\
+ :F7@:F8@:F9@:FA@:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
+ :k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:\
+ :k;=\E[28~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\
+ :kh=\E[1~:l1@:l2@:l3@:l4@:tc=bq300:
+bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns:\
+ :is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :vb=\E[?5l\E[?5h:tc=bq300-pc:
+bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :rs=\E[?3h:tc=bq300-pc:
+bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l:\
+ :rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-pc:
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 8 bit Control Characters,
+# 80 columns screen.
+bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns:\
+ :%0@:%1@:*6@:@0@:@7=\2334~:F1=\23329~:F2=\23331~:F3@:F4@:F5@:\
+ :F6@:F7@:F8@:F9@:FA@:k1=\23317~:k2=\23318~:k3=\23319~:\
+ :k4=\23320~:k5=\23321~:k6=\23323~:k7=\23324~:k8=\23325~:\
+ :k9=\23326~:k;=\23328~:kD=\2333~:kI=\2332~:kN=\2336~:\
+ :kP=\2335~:kb=^H:kh=\2331~:l1@:l2@:l3@:l4@:tc=bq300-8:
+bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns:\
+ :is=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :vb=\E[?5l\E[?5h:tc=bq300-8-pc:
+bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :rs=\E[?3h:tc=bq300-8-pc:
+bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns:\
+ :co#132:ws#132:\
+ :is=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l:\
+ :rs=\E[?3h:vb=\E[?5l\E[?5h:tc=bq300-8-pc:
+
+#======================================================#
+# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
+#======================================================#
+
+# normal mode, 8 bits, 80 columns terminal.
+# RES reset : ^[e
+# RIS reset initial state: ^[c
+# BLE bell enable ^[h
+# BLD bell disable ^[g
+# CAMS char. attr. mode set ^[[D
+# CAMR char. attr. mode reset ^[[G
+# CLR clear ^[`
+# KBU keyboard unlock (set) ^[[W
+# KBL keyboard lock (reset) ^[[X
+# CM character mode (async.) ^[k
+# NEP non echoplex mode (by host) ^[l
+# EP echoplex mode (by host) ^[m
+# IM insert mode set ^[[I
+# IM insert mode reset ^[[J
+# RMS roll mode set ^[r
+# RMR roll mode reset ^[q
+# SM78 set mode vip7800 ^[[1q
+# SD scroll up (72 lines) ^[[0s
+# SD scroll down (72 lines) ^[[1s
+# RBM block mode reset ^[[E
+# SLS status line set ^[w
+# SLR status line reset ^[v
+# SLL status line lock ^[O
+# LGS Line-graphic mode set ^[G
+# LGR Line-graphic mode reset ^[F
+# TBC tab clear (at cursor pos.) ^[[g
+# TBI tab initialize ^[[N
+# TBS tab set (at cursor pos.) ^[p
+# PDS print data space ^[[0p
+# PHD print host data ^[[3p
+# PDT print data terminator ^[[<p
+# PRES print adapter reset ^[[2p
+# SSPR multi-part. reset ^[[<>u
+# SSP0 partition 0 set ^[[00u
+# SSP1 partition n format 1 ^[[PnPnSTRINGu
+# SSP2 partition n format 2 ^[[PnPnSTRINGu
+# SSP3 partition n format 3 ^[[PnPnu
+# ATR attribute (visual)
+# blink : ^[sB
+# dim : ^[sL
+# hide (blank) : ^[sH
+# restore : ^[sR
+# inverse video : ^[sI
+# prot. : ^[sP
+# underline : ^[s_
+# reset : ^{
+#
+# This covers the vip7800 and BQ3155-vip7800
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+vip|Bull Questar 3155-7800:\
+ :5i:am:es:hs:km:ms:xn:xo:\
+ :co#80:it#8:li#24:vt#3:ws#80:\
+ :#2=\EH:#4=\Eo:%i=\Eu:F1=\E\\:F2=\E\136:F3@:F4@:F5@:F6@:F7@:\
+ :F8@:F9@:FA@:FB=\E1:FC=\E5:FD=\E7:FE=\E9:FF=\E;:FG=\E=:FH=\E?:\
+ :FI=\EQ:FJ=\ES:FK=\EV:FL=\E]:FM=\E_:bl=^G:bt=\E[Z:cd=\EJ:\
+ :ce=\EK:cl=\E`:cm=\E[%i%3%3f:cr=^M:ct=\E[N:dc=\E[P:dl=\E[M:\
+ :do=^J:ds=\Ev:ei=\E[J:fs=\EO:ho=\EH:i2=\Er\E[W\E`:ic=\E[I:\
+ :im=\E[I:is=\E[00u\E[<>001001024080024080u\E[01u:\
+ :k1=\E0:k2=\E2:k3=\E6:k4=\E8:k5=\E\072:k6=\E<:k7=\E>:k8=\EP:\
+ :k9=\ER:k;=\ET:kA=\E[L:kB=\E[Z:kC=\E`:kD=\E[P:kE=\EK:\
+ :kF=\E[0s:kH=\EH\EA:kI=\E[I:kL=\E[M:kM=\E[J:kR=\E[1s:\
+ :kS=\EJ:kT=\Ep:ka=\E[N:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:\
+ :kt=\E[g:ku=\EA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:le=^H:ll=\EH\EA:\
+ :mb=\EsB:me=\EsR\EsU\EF:mh=\EsL:mk=\EsH:mp=\EsP:mr=\EsI:\
+ :nd=\EC:nw=^M:pf=\E[<p:po=\E[3p:ps=\E[0p:r1=\Ec:r2=\E[G:\
+ :s0=\EF:s1=\EG:se=\EsR:sf=^J:so=\EsI:sr=10\EA\EJ\EH\E[L:\
+ :st=\Ep:ta=^I:ts=\Ew:ue=\EsR:up=\EA:us=\Es_:\
+ :vb=\007\007\007:
+# normal screen, 8 bits, 132 columns terminal.
+vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide:\
+ :co#132:ws#132:\
+ :is=\E[00u\E[<>001001024132024132u\E[01u:tc=vip:
+vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines:\
+ :li#72:\
+ :is=\E[00u\E[<>001001024080072080u\E[01u:tc=vip:
+vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines:\
+ :co#132:li#72:ws#132:\
+ :is=\E[00u\E[<>001001024132072132u\E[01u:tc=vip:
+
+#### Chromatics
+#
+
+# I have put the long strings in :ti:/:te:. Ti sets up a window
+# that is smaller than the screen, and puts up a warning message
+# outside the window. Te erases the warning message, puts the
+# window back to be the whole screen, and puts the cursor at just
+# below the small window. I defined :ve: and :vi: to really turn
+# the cursor on and off, but I have taken this out since I don't
+# like the cursor being turned off when vi exits.
+cg7900|chromatics|chromatics 7900:\
+ :am:\
+ :co#80:li#40:\
+ :al=^A>2:bl=^G:cd=^Al:ce=^A`:cl=^L:cm=\001M%r%d,%d,:cr=^M:\
+ :dc=^A<1:dl=^A<2:do=^J:ei=:ho=^\:ic=^A>1:im=:le=^H:ll=^A|:\
+ :nd=^]:se=\001C1,\001c2,:sf=^J:so=\001C4,\001c7,:\
+ :te=\001W0,40,85,48,\014\001W0,0,85,48,\001M0,40,:\
+ :ti=\001P0\001O1\001R1\001C4,\001c0,\014\001M0,42,WARNING DOUBLE ENTER ESCAPE and \025\001C1,\001c2,\001W0,0,79,39,:\
+ :uc=\001\001_\001\200:up=^K:
+
+#### Computer Automation
+#
+
+ca22851|computer automation 22851:\
+ :am:\
+ :co#80:li#24:\
+ :bl=^G:cd=^\:ce=^]:cl=8\014:cm=\002%i%.%.:cr=^M:do=^J:ho=^^:\
+ :kd=^W:kh=^^:kl=^U:ku=^V:le=^U:nd=^I:sf=^J:up=^V:
+
+#### Cybernex
+#
+
+# This entry has correct padding and the undocumented "ri" capability
+cyb83|xl83|cybernex xl-83:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cd=62\020:ce=3\017:cl=62\014:cm=\027%+ %+ :cr=^M:\
+ :do=^J:ho=^K:kd=^J:kl=^H:kr=^I:ku=^N:le=^H:nd=^I:sf=^J:sr=^N:\
+ :up=^N:
+# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
+cyb110|mdl110|cybernex mdl-110:\
+ :am:bs:\
+ :co#80:li#24:\
+ :al=65\016A\016\035:bl=^G:cd=6\016@\026:ce=145\016@\026:\
+ :cl=70\030:cm=\020%+ %+ :cr=^M:dc=3.5\016A\036:\
+ :dl=40\016A\016\036:do=^J:ei=:ho=^Y:ic=3.5\016A\035:im=:\
+ :le=^H:nd=^U:se=^NG:sf=^J:so=^NF:ta=43\011:up=^Z:
+
+#### Datapoint
+#
+# Datapoint is gone. They used to be headquartered in Texas.
+# They created ARCnet, an Ethernet competitor that flourished for a while
+# in the early 1980s before 3COM got wise and cut its prices. The service
+# side of Datapoint still lives (1995) in the form of Intelogic Trace.
+#
+
+dp3360|datapoint|datapoint 3360:\
+ :am:bs:\
+ :co#82:li#25:\
+ :bl=^G:cd=^_:ce=^^:cl=^]^_:cr=^M:do=^J:ho=^]:le=^H:nd=^X:\
+ :sf=^J:up=^Z:
+
+# From: Jan Willem Stumpel <[email protected]>, 11 May 1997
+# The Datapoint 8242 Workstation was sold at least between 1985
+# and 1989. To make the terminal work with this entry, press
+# CONTROL-INT-INT to take the terminal off-line, and type (opt).
+# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
+# CR/LF off. Use control-shift-[] as escape key, control-I as tab,
+# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
+# fact unusable because the strings sent by the terminal conflict
+# with other keys).
+# The terminal is capable of displaying "box draw" characters.
+# For each graphic character you must send 2 ESC's (\E\E) followed
+# by a control character as follows:
+# character meaning
+# ========= =======
+# ctrl-E top tee
+# ctrl-F right tee
+# ctrl-G bottom tee
+# ctrl-H left tee
+# ctrl-I cross
+# ctrl-J top left corner
+# ctrl-K top right corner
+# ctrl-L bottom left corner
+# ctrl-M bottom right corner
+# ctrl-N horizontal line
+# ctrl-O vertical line
+# Unfortunately this cannot be fitted into the termcap/terminfo
+# description scheme.
+dp8242|datapoint 8242:\
+ :ms:\
+ :co#80:li#25:\
+ :al=\E^T:bl=^G:cd=^W:ce=^V:cl=\025\E\004\027\030:\
+ :cm=\011%r%+\\%+\\:cr=^M:dl=\E^Z:do=^J:ho=^U:\
+ :i1=\E\014\E\016\200\230\200\317\025\027\030\E\004:\
+ :k1=^G\Ee:k2=^I\Ed:k3=^J\Ec:k4=^J\Eb:k5=^S\Ea:k6=\EO\Ee:\
+ :k7=\EN\Ed:k8=\EM\Ec:k9=\EL\Eb:k;=\EK\Ea:kb=^H:kd=^B:kl=^D:\
+ :kr=^F:ku=^E:le=^H:nw=^M^J:\
+ :r1=\E\014\E\016\200\230\200\317\025\027\030\E\004:\
+ :rp=\E\023%.%.:se=\E^D:sf=^C:so=\E^E:sr=^K:ta=^I:ue=\E^D:\
+ :us=\E^F:ve=^X:vi=^Y:
+
+#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
+#
+# These entries are DEC's official terminfos for its older terminals.
+# Contact Bill Hedberg <[email protected]> of Terminal Support
+# Engineering for more information. Updated terminfos and termcaps
+# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+#
+
+gt40|dec gt40:\
+ :bs:os:\
+ :co#72:li#30:\
+ :bl=^G:cr=^M:do=^J:le=^H:
+gt42|dec gt42:\
+ :bs:os:\
+ :co#72:li#40:\
+ :bl=^G:cr=^M:do=^J:le=^H:
+vt50|dec vt50:\
+ :bs:\
+ :co#80:li#12:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cr=^M:do=^J:le=^H:nd=\EC:\
+ :sf=^J:ta=^I:up=\EA:
+vt50h|dec vt50h:\
+ :bs:\
+ :co#80:li#12:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cr=^M:do=^J:\
+ :le=^H:nd=\EC:sf=^J:sr=\EI:ta=^I:up=\EA:
+# (vt61: there's a BSD termcap that claims :dl=\EPd:, :al=\EPf.: :kb=^H:)
+vt61|vt-61|vt61.5|dec vt61:\
+ :co#80:li#24:\
+ :bl=^G:cd=120\EJ:ce=70\EK:cl=120\EH\EJ:cm=20\EY%+ %+ :\
+ :cr=20\r:do=^J:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=20\EC:\
+ :sf=20\n:sr=\EI:ta=^I:up=20\EA:
+
+# The gigi does standout with red!
+# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
+gigi|vk100|dec gigi graphics terminal:\
+ :am:bs:xn:\
+ :co#84:li#24:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:do=^J:\
+ :is=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h:k1=\EOP:\
+ :k2=\EOQ:k3=\EOR:k4=\EOS:kd=\EOB:ke=\E[?1l\E>:kh=\E[H:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:me=\E[m:\
+ :nd=\E[C:se=\E[m:sf=^J:so=\E[7;31m:sr=\EM:ta=^I:ue=\E[m:\
+ :up=\E[A:us=\E[4m:
+
+# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
+# a PC differentiated from the IBM clones. It was a total, ludicrous,
+# grossly-overpriced failure (among other things, DEC's OS didn't include
+# a format program, so you had to buy pre-formatted floppies from DEC at
+# a hefty premium!).
+pro350|decpro|dec pro console:\
+ :bs:\
+ :co#80:it#8:li#24:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\EG:as=\EF:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :do=\EB:\
+ :ho=\EH:k0=\EE:k1=\EF:k2=\EG:k3=\EH:k4=\EI:k5=\EJ:k6=\Ei:\
+ :k7=\Ej:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:\
+ :se=\E^N:so=\E^H:sr=\EI:ta=^I:ue=\E^C:up=\EA:us=\E^D:
+
+dw1|decwriter I:\
+ :bs:hc:os:\
+ :co#72:\
+ :bl=^G:cr=^M:do=^J:le=^H:sf=^J:
+dw2|decwriter|dw|decwriter II:\
+ :bs:hc:os:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:kb=^H:le=^H:sf=^J:
+# \E(B Use U.S. character set (otherwise # => british pound !)
+# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
+# \E[w 10 char/in pitch
+# \E[1;132 full width horizontal margins
+# \E[2g clear all tab stops
+# \E[z 6 lines/in
+# \E[66t 66 lines/page (for \f)
+# \E[1;66r full vertical page can be printed
+# \E[4g clear vertical tab stops
+# \E> disable alternate keypad mode (so it transmits numbers!)
+# \E[%i%p1%du set tab stop at column %d (origin == 1)
+# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
+# a tab stop)
+#
+# The dw3 does standout with wide characters.
+#
+dw3|la120|decwriter III:\
+ :bs:hc:os:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:\
+ :i1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>:\
+ :is=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r:\
+ :kb=^H:le=^H:me=\E[w:se=\E[w:sf=^J:so=\E[6w:ta=^I:
+dw4|decwriter IV:\
+ :am:bs:hc:os:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:is=\Ec:k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:\
+ :kb=^H:le=^H:sf=^J:ta=^I:
+
+# These aren't official
+ln03|dec ln03 laser printer:\
+ :hc:\
+ :co#80:li#66:\
+ :bl=^G:cr=^M:do=^J:hd=\EK:hu=\EL:me=\E[m:nw=^M^J:se=\E[22m:\
+ :sf=^J:so=\E[1m:ta=^I:ue=\E[24m:us=\E[4m:
+ln03-w|dec ln03 laser printer 132 cols:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:kb=^H:kd=^J:kl=^H:nw=^M^J:sf=^J:ta=^I:\
+ :tc=ln03:
+
+#### Delta Data (dd)
+#
+
+# Untested. The cup sequence is hairy enough that it probably needs work.
+# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
+# There are BSD-derived termcap entries floating around for this puppy
+# that are *certainly* wrong.
+delta|dd5000|delta data 5000:\
+ :am:bs:\
+ :co#80:li#27:\
+ :bl=^G:ce=^NU:cl=^NR:cm=\017%+^P%+^P:dc=^NV:do=^J:ho=^NQ:\
+ :le=^H:nd=^Y:sf=^J:up=^Z:
+
+#### Digital Data Research (ddr)
+#
+
+# (ddr: I added <rmam>/<smam> based on the init string -- esr)
+ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator:\
+ :am:bs:xn:\
+ :co#80:it#8:li#24:vt#3:\
+ :RA=\E[7l:SA=\E[7l:cd=50\E[J:ce=3\E[K:cl=50\E[H\E[2J:\
+ :cm=5\E[%i%d;%dH:cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
+ :is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ks=\E[?1h\E=:\
+ :ku=\E[A:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
+ :nd=2\E[C:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\
+ :rf=/usr/share/tabset/vt100:sc=\E7:se=\E[m:sf=5\ED:\
+ :so=\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
+
+#### Evans & Sutherland
+#
+
+# Jon Leech <[email protected]> tells us:
+# The ps300 was the Evans & Sutherland Picture System 300, a high
+# performance 3D vector graphics system with a bunch of specialized hardware.
+# Approximate date of release was 1982 (early 80s, anyway), and it had several
+# evolutions including (limited) color versions such as the PS330C. PS300s
+# were effectively obsolete by the late 80s, replaced by raster graphics
+# systems, although specialized applications like molecular modelling
+# hung onto them for a while longer. AFAIK all E&S vector graphics systems
+# are out of production, though of course E&S is very much alive (in 1996).
+# (ps300: changed ":pt@:" to "it@" -- esr)
+#
+ps300|Picture System 300:\
+ :xt:\
+ :it@:\
+ :se@:so@:ue@:us@:tc=vt100:
+
+#### General Electric (ge)
+#
+
+terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200:\
+ :bs:hc:os:\
+ :co#120:\
+ :bl=^G:cr=^M:do=^J:sf=^J:
+
+#### Heathkit/Zenith
+#
+
+# Here is a description of the H19 DIP switches:
+#
+# S401
+# 0-3 = baud rate as follows:
+#
+# 3 2 1 0
+# --- --- --- ---
+# 0 0 1 1 300 baud
+# 0 1 0 1 1200 baud
+# 1 0 0 0 2400 baud
+# 1 0 1 0 4800 baud
+# 1 1 0 0 9600 baud
+# 1 1 0 1 19.2K baud
+#
+# 4 = parity (0 = no parity)
+# 5 = even parity (0 = odd parity)
+# 6 = stick parity (0 = normal parity)
+# 7 = full duplex (0 = half duplex)
+#
+# S402
+# 0 = block cursor (0 = underscore cursor)
+# 1 = no key click (0 = keyclick)
+# 2 = wrap at end of line (0 = no wrap)
+# 3 = auto LF on CR (0 = no LF on CR)
+# 4 = auto CR on LF (0 = no CR on LF)
+# 5 = ANSI mode (0 = VT52 mode)
+# 6 = keypad shifted (0 = keypad unshifted)
+# 7 = 50Hz refresh (1 = 60Hz refresh)
+#
+# Factory Default settings are as follows:
+# 7 6 5 4 3 2 1 0
+# S401 1 0 0 0 1 1 0 0
+# S402 0 0 0 0 0 0 0 0
+# (h19: I added <rmam>/<smam> based on the init string;
+# also added empty <acsc> to suppress a tic warning -- esr)
+h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode:\
+ :am:bs:mi:ms:\
+ :co#80:it#8:li#24:\
+ :RA=\E[?7l:SA=\E[?7h:ac=:ae=\E[11m:al=1*\E[1L:as=\E[10m:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :dc=\E[1P:dl=1*\E[1M:do=\E[1B:ei=\E[4l:ho=\E[H:im=\E[4h:\
+ :is=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h:k1=\EOS:\
+ :k2=\EOT:k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:\
+ :kb=^H:kd=\E[1B:kh=\E[H:kl=\E[1D:kr=\E[1C:ku=\E[1A:l6=blue:\
+ :l7=red:l8=white:le=^H:nd=\E[1C:se=\E[m:sf=^J:so=\E[7m:\
+ :sr=\EM:ta=^I:up=\E[1A:ve=\E[>4l:vs=\E[>4h:
+h19-bs|heathkit w/keypad shifted:\
+ :ke=\Eu:ks=\Et:tc=h19-b:
+h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor:\
+ :ke=\Eu:ks=\Et:tc=h19-u:
+# (h19: merged in :ip: from BSDI hp19-e entry>;
+# also added empty <acsc> to suppress a tic warning --esr)
+# From: Tim Pierce <[email protected]>, 23 Feb 1998
+# Tim tells us that:
+# I have an old Zenith-19 terminal at home that still gets a lot of use.
+# This terminal suffers from the same famous insert-mode padding lossage
+# that has been acknowledged for the Z29 terminal. Emacs is nearly
+# unusable on this box, since even a half-scroll up or down the window
+# causes flaming terminal death.
+#
+# On the Z19, the only way I have found around this problem is to remove
+# the :al: and :dl: entries entirely. No amount of extra padding will
+# help (I have tried up to 20000). Removing :al=\EL$: and :dl=\EM$:
+# makes Emacs a little slower, but it remains in the land of the living.
+# Big win.
+h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19:\
+ :am:bs:es:hs:mi:ms:\
+ :co#80:it#8:li#24:\
+ :ac=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\136:ae=\EG:\
+ :as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :cr=^M:\
+ :dc=\EN:do=\EB:ei=\EO:fs=\Ek\Ey5:ho=\EH:im=\E@:ip=.5<1.5/>:\
+ :k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
+ :kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l6=blue:l7=red:\
+ :l8=white:le=^H:nd=\EC:se=\Eq:sf=^J:so=\Ep:sr=\EI:ta=^I:\
+ :ts=\Ej\Ex5\EY8%+ \Eo\Eo:up=\EA:ve=\Ey4:vs=\Ex4:
+h19-u|heathkit with underscore cursor:\
+ :ve@:vs@:tc=h19-b:
+h19-g|h19g|heathkit w/block cursor:\
+ :ve=\Ex4:vs@:tc=h19-b:
+alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19:\
+ :li#60:\
+ :al=\EL:dl=\EM:tc=h19:
+
+# The major problem with the Z29 is that it requires more padding than the Z19.
+#
+# The problem with declaring an H19 to be synonymous with a Z29 is that
+# it needs more padding. It especially loses if a program attempts
+# to put the Z29 into insert mode and insert text at 9600 baud. It
+# even loses worse if the program attempts to insert tabs at 9600
+# baud. Adding padding to text that is inserted loses because in
+# order to make the Z29 not die, one must add so much padding that
+# whenever the program tries to use insert mode, the effective
+# rate is about 110 baud.
+#
+# What program would want to put the terminal into insert mode
+# and shove stuff at it at 9600 baud you ask?
+#
+# Emacs. Emacs seems to want to do the mathematically optimal
+# thing in doing a redisplay rather than the practical thing.
+# When it is about to output a line on top of a line that is
+# already on the screen, instead of just killing to the end of
+# the line and outputting the new line, it compares the old line
+# and the new line and if there are any similarities, it
+# constructs the new line by deleting the text on the old line
+# on the terminal that is already there and then inserting new
+# text into the line to transform it into the new line that is
+# to be displayed. The Z29 does not react kindly to this.
+#
+# But don't cry for too long.... There is a solution. You can make
+# a termcap entry for the Z29 that says the Z29 has no insert mode.
+# Then Emacs cannot use it. "Oh, no, but now inserting into a
+# line will be really slow", you say. Well there is a sort of a
+# solution to that too. There is an insert character option on
+# the Z29 that will insert one character. Unfortunately, it
+# involves putting the terminal into ansi mode, inserting the
+# character, and changing it back to H19 mode. All this takes 12
+# characters. Pretty expensive to insert one character, but it
+# works. Either Emacs doesn't try to use its inserting hack when
+# it's only given an insert character ability or the Z29 doesn't
+# require padding with this (the former is probably more likely,
+# but I haven't checked it out).
+# (z29: added empty <acsc> to suppress a tic warning, merged in
+# status line capabilities from BRL entry --esr)
+z29|zenith29|z29b|zenith z29b:\
+ :am:bs:es:hs:mi:ms:pt:\
+ :co#80:kn#10:li#24:\
+ :ac=:ae=\EF:al=1\EL:as=\EG:bc=\ED:bl=^G:bt=\E-:cd=14\EJ:\
+ :ce=1\EK:cl=14\EE:cm=\EY%+ %+ :cr=^M:dc=0.1*\EN:dl=1\EM:\
+ :do=\EB:ds=\Ey1:ei=\EO:fs=\Ek\Ey5:ho=\EH:\
+ :ic=1\E<\E[1@\E[?2h:im=\E@:is=\E<\E[?2h\Ev:k0=\E~:k1=\ES:\
+ :k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:k9=\E0I:\
+ :kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:l0=home:le=^H:\
+ :nd=\EC:se=\Eq:sf=2\n:so=\Ep:sr=2\EI:ta=^I:ue=\Es0:up=\EA:\
+ :us=\Es8:ve=\Ey4:vs=\Ex4:
+# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
+# the world is stable. <rs1> causes the terminal to be reset to the state
+# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
+# cursor, bc -> block cursor.
+# From: Mike Meyers
+# (z29a: replaced nonexistent :if=/usr/share/tabset/zenith29: befause :st:
+# looks vt100-compatible -- esr)
+z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode:\
+ :am:bs:es:hs:mi:ms:pt:\
+ :co#80:it#8:kn#10:li#24:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:bc=\ED:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:\
+ :do=^J:ds=\E[>1l:fs=\E[u\E[>5l:ho=\E[H:\
+ :if=/usr/share/tabset/vt100:k0=\E[~:k1=\EOS:k2=\EOT:\
+ :k3=\EOU:k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:k9=\EOX:\
+ :kC=\E[J:kS=\E[J:kb=^H:kd=\EOB:kh=\E[H:kl=\EOD:kr=\EOC:\
+ :ku=\EOA:l0=help:le=^H:mb=\E[5m:md=\E[2m:me=\E[m:mh=\E[2m:\
+ :mr=\E[7m:nd=\E[C:nw=^M\ED:ps=\E#7:\
+ :r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m:\
+ :rc=\E[r:sc=\E[s:se=\E[m:sf=\ED:so=\E[7;2m:sr=\EM:st=\EH:\
+ :ta=^I:te=\E[?7h:ti=\E[?7l:\
+ :ts=\E[s\E[>5;1h\E[25;%i%dH\E[1K:ue=\E[m:up=\E[A:\
+ :us=\E[4m:
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor:\
+ :r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m:\
+ :tc=z29a:
+z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick:\
+ :r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m:\
+ :tc=z29a:
+z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick:\
+ :r1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m:\
+ :tc=z29a:
+# From: Jeff Bartig <[email protected]> 31 Mar 1995
+z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode:\
+ :5i:am:es:hs:mi:ms:xo:\
+ :co#80:li#24:\
+ :%1=\E[~:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:K1=\EOw:\
+ :K2=\EOy:K3=\EOu:K4=\EOq:K5=\EOs:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:ac=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~:\
+ :ae=\E(B:al=\E[1L:as=\E(0:bl=^G:bt=\E[1Z:cb=\E[1K:cd=\E[0J:\
+ :ce=\E[0K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[1P:dl=\E[1M:do=\E[B:\
+ :ds=\E[>1l:ei=\E[4l:fs=\E[u:ho=\E[H:im=\E[4h:\
+ :is=\E<\E[>1;3;5;6;7l\E[0m\E[2J:k1=\EOS:k2=\EOT:k3=\EOU:\
+ :k4=\EOV:k5=\EOW:k6=\EOP:k7=\EOQ:k8=\EOR:k9=\EOX:kS=\E[J:\
+ :kb=^H:kd=\E[B:ke=\E[>7l:kh=\E[H:kl=\E[D:kr=\E[C:ks=\E[>7h:\
+ :ku=\E[A:le=^H:ll=\E[24;1H:mb=\E[5m:md=\E[1m:me=\E[0m:\
+ :mh=\E[2m:mr=\E[7m:nd=\E[C:pf=\E[4i:po=\E[5i:\
+ :ps=\E[?19h\E[i:rc=\E[u:rs=\E<\Ec\200:sc=\E[s:se=\E[0m:\
+ :sf=^J:so=\E[7m:st=\EH:ta=^I:ts=\E[s\E[>1h\E[25;%i%dH:\
+ :ue=\E[0m:up=\E[A:us=\E[4m:ve=\E[>5l:vi=\E[>5h:
+
+# From: Brad Brahms <Brahms@USC-ECLC>
+z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor:\
+ :ve=\Ey4\Em70:vs=\Ex4\Em71:tc=z100bw:
+# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
+z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc:\
+ :bs:mi:ms:pt:\
+ :co#80:it#8:kn#10:li#24:\
+ :ac=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\136:ae=\EG:\
+ :al=5*\EL:as=\EF:cd=\EJ:ce=\EK:cl=5*\EE:cm=1*\EY%+ %+ :\
+ :dc=1*\EN:dl=5*\EM:do=\EB:ei=\EO:ho=\EH:im=\E@:k0=\EJ:\
+ :k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:k6=\EP:k7=\EQ:k8=\ER:\
+ :k9=\EOI:kb=^H:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:le=^H:\
+ :nd=\EC:se=\Eq:so=\Ep:sr=\EI:ta=^I:up=\EA:ve=\Ey4:vs=\Ex4:
+p19|h19-b with il1/dl1:\
+ :al=2*\EL:dl=2*\EM:tc=h19-b:
+# From: <[email protected]>
+# (ztx: removed duplicate :sr: -- esr)
+ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11:\
+ :am:bs:es:hs:\
+ :co#80:it#8:li#24:\
+ :al=\EL:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :dl=\EM:do=^J:\
+ :ds=\Ey1:fs=\Ek\Ey5:ho=\EH:\
+ :is=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>:k0=\ES:\
+ :k1=\EB:k2=\EU:k3=\EV:k4=\EW:k5=\EP:k6=\EQ:k7=\ER:kb=^H:\
+ :kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=^H:nd=\EC:se=\Eq:so=\Es5:\
+ :sr=\EI:ta=^I:ue=\Eq:up=\EA:us=\Es2:
+
+#### IMS International (ims)
+#
+# There was a company called IMS International located in Carson City,
+# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
+# bus/Z80 hardware and a line of terminals called Ultimas.
+#
+
+# From: Erik Fair <[email protected]> Sun Oct 27 07:21:05 1985
+ims950-b|bare ims950 no init string:\
+ :is@:tc=ims950:
+# (ims950: removed obsolete ":ko@:" -- esr)
+ims950|ims televideo 950 emulation:\
+ :xn@:\
+ :k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:kl@:kr@:ku@:vb@:\
+ :tc=tvi950:
+# (ims950-rv: removed obsolete ":ko@:" -- esr)
+ims950-rv|ims tvi950 rev video:\
+ :xn@:\
+ :k0@:k1@:k2@:k3@:k4@:k5@:k6@:k7@:k8@:k9@:kb@:kd@:kh@:kl@:kr@:ku@:vb@:\
+ :tc=tvi950-rv:
+ims-ansi|ultima2|ultimaII|IMS Ultima II:\
+ :am:bs:\
+ :co#80:it#8:li#24:\
+ :cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:cm=\E[%i%2;%2H:do=\ED:\
+ :if=/usr/share/tabset/vt100:\
+ :is=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r:kd=\E[B:kh=\E[H:\
+ :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\EC:se=\E[m\E[1m:\
+ :so=\E[7m:sr=\EM:ta=^I:ue=\E[m\E[1m:up=\EM:us=\E[4m:
+
+#### Intertec Data Systems
+#
+# I think this company is long dead as of 1995. They made an early CP/M
+# micro called the "Intertec Superbrain" that was moderately popular,
+# then sank out of sight.
+#
+
+superbrain|intertec superbrain:\
+ :am:bs:bw:\
+ :co#80:li#24:\
+ :bc=^U:bl=^G:cd=10*\E~k<10*>:ce=15\E~K:cl=5*\014:\
+ :cm=20\EY%+ %+ :cr=^M:do=^J:kd=^J:kl=^U:kr=^F:ku=^K:le=^H:\
+ :nd=^F:sf=^J:ta=^I:te=^L:ti=^L:up=^K:
+# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
+# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
+# and the reverse is actually true. Try it. -- esr)
+intertube|intertec|Intertec InterTube:\
+ :am:bs:\
+ :co#80:li#25:\
+ :bl=^G:cl=^L:cm=50\EY%+ %+ :cr=^M:do=^J:ho=^A:le=^H:nd=^F:\
+ :se=\E0@:sf=^J:so=\E0P:up=^Z:
+# The intertube 2 has the "full duplex" problem like the tek 4025: if you
+# are typing and a command comes in, the keystrokes you type get interspersed
+# with the command and it messes up
+intertube2|intertec data systems intertube 2:\
+ :bs:\
+ :ce=\EK:ch=\020%B%.:cm=\016%.\020%B%.:cv=\013%.:\
+ :ll=^K^X\r:tc=intertube:
+
+#### Ithaca Intersystems
+#
+# This company made S100-bus personal computers long ago in the pre-IBM-PC
+# past. They used to be reachable at:
+#
+# Ithaca Intersystems
+# 1650 Hanshaw Road
+# Ithaca, New York 14850
+#
+# However, the outfit went bankrupt years ago.
+#
+
+# The Graphos III was a color graphics terminal from Ithaca Intersystems.
+# These entries were written (originally in termcap syntax) by Brian Yandell
+# <[email protected]> and Mike Meyer <[email protected]> at the
+# University of Wisconsin.
+
+# (graphos: removed obsolete and syntactically incorrect :kn=4:,
+# removed :if=/usr/share/tabset/init.graphos: and
+# <rf=/usr/share/tabset/init.graphos> no such file & no :st: -- esr)
+graphos|graphos III:\
+ :am:mi:\
+ :co#80:it#8:li#24:\
+ :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+ :UP=\E[%dA:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:dm=\E[4h:do=\E[B:\
+ :ed=\E[4l:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ku=\E[A:le=^H:me=\E[m:nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:\
+ :se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:up=\E[A:\
+ :ve=\Ez56;2;0;0z\Ez73z\Ez4;1;1z:\
+ :vs=\Ez4;2;1z\Ez56;2;80;24z:
+graphos-30|graphos III with 30 lines:\
+ :li#30:\
+ :vs=\Ez4;2;1z\Ez56;2;80;30z:tc=graphos:
+
+#### Modgraph
+#
+# These people used to be reachable at:
+#
+# Modgraph, Inc
+# 1393 Main Street,
+# Waltham, MA 02154
+# Vox: (617)-890-5796.
+#
+# However, if you call that number today you'll get an insurance company.
+# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
+# 26 Feb 1997 that says:
+#
+# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
+# for ~7 years. Modgraph still in business. Products are rugged laptop and
+# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
+# panel-mount etc). I can be emailed at [email protected]
+#
+# Peter D. Smith <[email protected]> notes that his modgraph manual was
+# dated 1984. According to the manual, it featured Tek 4010/4014
+# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
+#
+
+modgraph|mod24|modgraph terminal emulating vt100:\
+ :xn@:\
+ :co#80:li#24:\
+ :is=\E\1369;0s\E\1367;1s\E[3g\E\13611;9s\E\13611;17s\E\13611;25s\E\13611;33s\E\13611;41s\E\13611;49s\E\13611;57s\E\13611;65s\E\13611;73s\E\13611;81s\E\13611;89s:\
+ :rf@:sr=5\EM\E[K:vs=\E\1369;0s\E\1367;1s:tc=vt100:
+# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
+modgraph2|modgraph gx-1000 80x24 with keypad not enabled:\
+ :am:da:db:\
+ :co#80:it#8:li#24:\
+ :cd=50\EJ:ce=3\EK:cl=50\EH\EJ:cm=5\EY%+ %+ :do=2\EB:\
+ :is=\E<\E\1365;2s\E\1367;1s\E[3g\E\13611;9s\E\13611;17s\E\13611;25s\E\13611;33s\E\13611;41s\E\13611;49s\E\13611;57s\E\13611;65s\E\13611;73s\E\13611;81s\E\13611;89s\E\13612;0s\E\13614;2s\E\13615;9s\E\13625;1s\E\1369;1s\E\13627;1:\
+ :le=^H:nd=2\EC:sr=5\EI:ta=^I:up=2\EA:
+#
+# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
+# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
+# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
+# mark and using delete-to-killbuffer work correctly. However, we would
+# like normal mode of operation to be using a Modgraph with 48 line setting.
+# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
+# the setting mark and delete-to-killbuffer results in the deletion of only
+# the line the mark is set on.
+# We've discovered that the delete-to-killbuffer works correctly
+# with TERM=mod and screen set to 80x48 but it's not obvious. Only
+# the first line disappears but a ctrl-l shows that it did work
+# correctly.
+modgraph48|mod|Modgraph w/48 lines:\
+ :am:bs:pt:xn:\
+ :co#80:it#8:li#48:vt#3:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:do=^J:ho=\E[H:\
+ :is=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h:k1=\EOP:k2=\EOQ:\
+ :k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\
+ :me=\E[m:mr=\E[7m:nd=\E[C:nl=^J:r1=\E=\E[0q\E>:rc=\E8:\
+ :sc=\E7:se=\E[m:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:\
+ :us=\E[4m:vb=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q:
+
+#### Morrow Designs
+#
+# This was George Morrow's company. They started in the late 1970s making
+# S100-bus machines. They used to be reachable at:
+#
+# Morrow
+# 600 McCormick St.
+# San Leandro, CA 94577
+#
+# but they're long gone now (1995).
+#
+
+# The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
+# Jeff's specimen was dated June 1984.
+# From: Jeff Wieland <[email protected]> 24 Feb 1995
+mt70|mt-70|Morrow MD-70; native Morrow mode:\
+ :am:mi:ms:xo:\
+ :co#80:it#8:li#24:\
+ :%1=^AO\r:F1=^A`\r:F2=^Aa\r:F3=^Ab\r:F4=^Ac\r:F5=^Ad\r:\
+ :F6=^Ae\r:F7=^Af\r:F8=^Ag\r:F9=^Ah\r:FA=^Ai\r:\
+ :ac=+z,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI:ae=\E%%:al=\EE:\
+ :as=\E$:bl=^G:bt=\EI:cd=\EY:ce=10\ET:cl=^Z:cm=1\E=%+ %+ :\
+ :cr=^M:ct=\E0:dc=\EW:dl=\ER:do=^J:ei=:ho=^^:i1=\E"2\EG0\E]:\
+ :ic=\EQ:im=:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:\
+ :k6=^AE\r:k7=^AF\r:k8=^AG\r:k9=^AH\r:k;=^AI\r:kB=^A^Z\r:\
+ :kC=^An\r:kD=\177:kb=^H:kd=^AK\r:kh=^AN\r:kl=^AL\r:\
+ :kr=^AM\r:ku=^AJ\r:le=^H:mh=\EG2:mk@:nd=^L:nw=^_:sf=^J:ta=^I:\
+ :te=:ti=\E"2\EG0\E]:up=^K:us=\EG1:vb=\EK1\EK0:ve=\E"2:\
+ :vi=\E"0:tc=adm+sgr:
+
+#### Motorola
+#
+
+# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
+# (Seth H Zirin)
+ex155|Motorola Exorterm 155:\
+ :am:bs:bw:\
+ :co#80:kn#5:li#24:ug#1:\
+ :bt=\E[:cd=\ET:ce=\EU:cl=\EX:cm=\EE%+ %+ :do=\EB:ho=\E@:\
+ :kB=\E[:kC=\EX:kE=\EU:kS=\ET:kb=^H:kd=^J:kh=\E@:kl=^H:kr=^L:\
+ :ku=^K:le=\ED:nd=\EC:se=\Ec\ED:so=\Eb\ED:ta=\EZ:ue=\Eg\ED:\
+ :up=\EA:us=\Ef\ED:
+
+#### Omron
+#
+# This company is still around in 1995, manufacturing point-of-sale systems.
+
+omron|Omron 8025AG:\
+ :am:bs:da:db:\
+ :co#80:li#24:\
+ :al=\EL:bl=^G:cd=\ER:ce=\EK:cl=\EJ:cr=^M:dc=\EP:dl=\EM:do=^J:\
+ :ho=\EH:le=^H:nd=\EC:se=\E4:sf=\ES:so=\Ef:sr=\ET:up=\EA:\
+ :vs=\EN:
+
+#### Ramtek
+#
+# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
+# were competition for things like the Tektronics 4025.
+#
+
+# Ramtek 6221 from BRL, probably by Doug Gwyn
+# The following SET-UP modes are assumed for normal operation:
+# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
+# NEWLINE_OFF 80_COLUMNS
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements; I recommend
+# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
+# Hardware tabs are assumed to be every 8 columns; they can be set up by the
+# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
+# Note that the Control-E key is useless on this brain-damaged terminal. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+rt6221|Ramtek 6221 80x24:\
+ :bs:ms:pt:xo:\
+ :co#80:it#8:kn#4:li#24:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ac=:ae=^O:as=^N:\
+ :bl=^G:cd=\E[J:ce=\E[K:cl=\E[1;1H\E[J:cm=\E[%i%d;%dH:\
+ :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^K:ho=\E[1;1H:is=\E)0:\
+ :k0=\EOP:k1=\EOQ:k2=\EOR:k3=\EOS:kb=^H:kd=\E[B:ke=\E>:\
+ :kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
+ :le=^H:ll=\E[24;1H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:nw=\EE:\
+ :r1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>:\
+ :rc=\E8:sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
+ :ue=\E[m:up=\EM:us=\E[4m:ve=\E[>5h\E[>9h:vi=\E[>5l:\
+ :vs=\E[>7h\E[>9l:
+# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
+rt6221-w|Ramtek 6221 160x48:\
+ :co#160:li#48:\
+ :ll=\E[48;1H:tc=rt6221:
+
+#### RCA
+#
+
+# RCA VP3301 or VP3501
+rca|rca vp3301/vp3501:\
+ :bs:\
+ :co#40:li#24:\
+ :cl=^L:cm=\EY%+ %+ :ho=^Z:nd=^U:se=\E\ES0:so=\E\ES1:up=^K:
+
+
+#### Selanar
+#
+
+# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
+# The following SET-UP modes are assumed for normal operation:
+# SET_DEFAULT_TABS 48_LINES 80_COLUMNS
+# ONLINE ANSI CURSOR_VISIBLE
+# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
+# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
+# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
+# For use with graphics software, all graphics modes should be set to factory
+# default. Other SET-UP modes may be set for operator convenience or
+# communication requirements. No delays are specified; use "stty ixon -ixany"
+# to enable DC3/DC1 flow control!
+# I commented out the scrolling capabilities since they are too slow.
+hirez100|Selanar HiREZ-100:\
+ :bs:mi:ms:pt:xo:\
+ :co#80:it#8:kn#4:li#48:vt#3:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:ac=:ae=^O:al=\E[L:as=^N:bl=^G:cd=\E[J:\
+ :ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:ct=\E[3g:\
+ :dc=\E[P:dl=\E[M:do=^J:ho=\E[H:is=\E<\E)0:k0=\EOP:k1=\EOQ:\
+ :k2=\EOR:k3=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\
+ :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l0=PF1:l1=PF2:l2=PF3:l3=PF4:\
+ :le=^H:ll=\E[48H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:nw=\EE:pf=\E[4i\E[?4i:po=\E[?5i\E[5i:ps=\E[i:\
+ :r1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>:\
+ :rc=\E8:sc=\E7:se=\E[m:so=\E[7m:st=\EH:ta=^I:ue=\E[m:up=\EM:\
+ :us=\E[4m:
+hirez100-w|Selanar HiREZ-100 in 132-column mode:\
+ :co#132:tc=hirez100:
+
+#### Signetics
+#
+
+# From University of Wisconsin
+vsc|Signetics Vsc Video driver by RMC:\
+ :am:ms:\
+ :co#80:it#8:li#26:\
+ :ce=\E[K:cl=50\E[;H\E[2J:cm=\E[%i%d;%dH:cr=^M:do=^J:\
+ :ho=\E[H:kb=^H:kd=^J:kl=^H:le=^H:me=^_!:mr=^_\040:nd=\E[C:\
+ :nw=^M^J:se=^_!:sf=^J:so=^_\040:ta=^I:ue=^_#:up=\E[A:us=^_":
+
+#### Soroc
+#
+# Alan Frisbie <[email protected]> writes:
+#
+# As you may recall, the Soroc logo consisted of their name,
+# with the letter "S" superimposed over an odd design. This
+# consisted of a circle with a slightly smaller 15 degree (approx.)
+# wedge with rounded corners inside it. The color was sort of
+# a metallic gold/yellow.
+#
+# If I had been more of a beer drinker it might have been obvious
+# to me, but it took a clue from their service department to make
+# me exclaim, "Of course!" The circular object was the top of
+# a beer can (the old removable pop-top style) and "Soroc" was an
+# anagram for "Coors".
+#
+# I can just imagine the founders of the company sitting around
+# one evening, tossing back a few and trying to decide what to
+# call their new company and what to use for a logo.
+#
+
+# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
+soroc120|iq120|soroc|soroc iq120:\
+ :cd=\EY:ce=\ET:cl=2\E*:do=^J:kd=^J:kl=^H:kr=^L:ku=^K:\
+ :tc=adm3a:
+soroc140|iq140|soroc iq140:\
+ :am:bs:mi:\
+ :co#80:li#24:\
+ :al=1*\Ee:bl=^G:bt=\EI:cd=\Ey:ce=\Et:cl=\E+:cm=\E=%+ %+ :\
+ :cr=^M:dc=\Ew:dl=.7*\Er:do=^J:ei=\E8:ho=^^:im=\E9:k0=^A0\r:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kh=^^:kr=^L:ku=^K:le=^H:\
+ :ll=^^^K:nd=^L:se=\E\177:sf=^J:so=\E\177:ue=\E^A:up=^K:\
+ :us=\E^A:
+
+#### Southwest Technical Products
+#
+# These guys made an early personal micro called the M6800.
+# The ct82 was probably its console terminal.
+#
+
+# (swtp: removed obsolete ":bc=^D:" -- esr)
+swtp|ct82|southwest technical products ct82:\
+ :am:\
+ :co#82:li#20:\
+ :al=^\^Y:bl=^G:cd=^V:ce=^F:cl=^L:cm=\013%r%.%.:cr=^M:\
+ :dc=^\^H:dl=^Z:do=^J:ei=:ho=^P:ic=^\^X:im=:\
+ :is=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011:\
+ :le=^D:ll=^C:nd=^S:se=^^^F:sf=^N:so=^^^V:sr=^O:up=^A:
+
+#### Synertek
+#
+# Bob Manson <[email protected]> writes (28 Apr 1995):
+#
+# Synertek used to make ICs, various 6502-based single-board process
+# control and hobbyist computers, and assorted peripherals including a
+# series of small inexpensive terminals (I think they were one of the
+# first to have a "terminal-on-a-keyboard", where the terminal itself
+# was only slightly larger than the keyboard).
+#
+# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
+# was a 40x24 terminal that could connect to a standard TV through a
+# video modulator. The KTM-2/80 was the 80-column version (the 2/40
+# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
+# I have a KTM-2/80 still in working order. The KTM-2s had fully
+# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
+# ROM and 2 ROMs as character generators. They were incredibly simple,
+# and I've never had any problems with mine (witness the fact that mine
+# was made in 1981 and is still working great... I've blown the video
+# output transistor a couple of times, but it's a 2N2222 :-)
+#
+# The KTM-3 (which is what is listed in the terminfo file) was their
+# attempt at putting a KTM-2 in a box (and some models came with a
+# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
+# control and escape sequences are very different. The KTM-3 was always
+# real broken, at least according to the folks I've talked to about it.
+#
+# The padding in the entry is probably off--these terminals were very
+# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
+# anyone with any sanity replaced the ROMs with something that provided
+# a reasonable subset of VT100 functionality, since the usual ROMs were
+# obviously very primitive... oh, you could get an upgraded ROM from
+# Synertek for some incredible amount of money, but what hacker with an
+# EPROM burner would do that? :)
+#
+# Sorry I don't have any contact info; I believe they were located in
+# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
+# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
+# business these days.
+#
+
+# Tested, seems to work fine with vi.
+synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal:\
+ :am:\
+ :co#80:li#24:\
+ :cd=\EJ:ce=\EK:cl=^Z:cm=\E=%+ %+ :le=^H:nd=^L:up=^K:
+
+#### Tab Office Products
+#
+# TAB Products Co. - Palo Alto, California
+# Electronic Office Products,
+# 1451 California Avenue 94304
+#
+# I think they're out of business.
+#
+
+# The tab 132 uses xon/xoff, so no padding needed.
+# :ks:/:ke: have nothing to do with arrow keys.
+# :is: sets 80 col mode, normal video, autowrap on (for :am:).
+# Seems to be no way to get rid of status line.
+# The manual for this puppy was dated June 1981. It claims to be VT52-
+# compatible but looks more vt100-like.
+tab132|tab|tab132-15|tab 132/15:\
+ :da:db:\
+ :co#80:dN@:li#24:lm#96:\
+ :al=\E[L:cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=^J:ei=\E[4l:\
+ :im=\E[4h:is=\E[?7h\E[?3l\E[?5l:kd=\E[B:ke@:kl=\E[D:ks@:\
+ :ku=\E[A:tc=vt100:
+tab132-w|tab132 in wide mode:\
+ :co#132:\
+ :is=\E[?7h\E[?3h\E[?5l:tc=tab132:
+tab132-rv|tab132 in reverse-video mode:\
+ :is=\E[?7h\E[?3l\E[?5h:tc=tab132:
+tab132-w-rv|tab132 in reverse-video/wide mode:\
+ :is=\E[?7h\E[?3h\E[?5h:tc=tab132-w:
+
+
+#### Teleray
+#
+# Research Incorporated
+# 6425 Flying Cloud Drive
+# Eden Prairie, MN 55344
+# Vox: (612)-941-3300
+#
+# The Teleray terminals were all discontinued in 1992-93. RI still services
+# and repairs these beasts, but no longer manufactures them. The Teleray
+# people believe that all the types listed below are very rare now (1995).
+# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
+# Model 100) that were ANSI-compatible.
+#
+# Note two things called "teleray". Reorder should move the common one
+# to the front if you have either. A dumb teleray with the cursor stuck
+# on the bottom and no obvious model number is probably a 3700.
+#
+
+t3700|dumb teleray 3700:\
+ :bs:\
+ :co#80:li#24:\
+ :bl=^G:cl=^L:cr=^M:do=^J:le=^H:sf=^J:
+t3800|teleray 3800 series:\
+ :bs:\
+ :co#80:it#8:li#24:\
+ :bl=^G:cd=\EJ:ce=\EK:cl=^L:cm=\EY%+ %+ :cr=^M:do=^J:ho=\EH:\
+ :le=^H:ll=\EY7\040:nd=\EC:sf=^J:ta=^I:up=^K:
+t1061|teleray|teleray 1061:\
+ :am:bs:km:xs:xt:\
+ :co#80:it#8:li#24:sg#1:ug#1:\
+ :al=2*\EL:bl=^G:cd=1\EJ:ce=\EK:cl=1\014:cm=\EY%+ %+ :cr=^M:\
+ :ct=\EG:dc=\EQ:dl=2*\EM:do=^J:ei=:ho=\EH:ic=\EP:im=:ip=0.4*:\
+ :is=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef:\
+ :k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:k7=^Z7:k8=^Z8:\
+ :le=^H:nd=\EC:se=\ER@:sf=^J:so=\040\ERD:st=\EF:ta=^I:\
+ :ue=\ER@:up=\EA:us=\ERH:
+t1061f|teleray 1061 with fast PROMs:\
+ :al=\EL:dl=\EM:ip@:tc=t1061:
+# "Teleray Arpa Special", officially designated as
+# "Teleray Arpa network model 10" with "Special feature 720".
+# This is the new (1981) fast microcode updating the older "arpa" proms
+# (which gave meta-key and programmable-fxn keys). 720 is much much faster,
+# converts the keypad to programmable function keys, and has other goodies.
+# Standout mode is still broken (magic cookie, etc) so is suppressed as no
+# programs handle such lossage properly.
+# Note: this is NOT the old termcap's "t1061f with fast proms."
+# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
+# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
+t10|teleray 10 special:\
+ :bs:km:xs:xt:\
+ :co#80:it#8:li#24:sg#2:ug#2:\
+ :al=\EL:cd=\EJ:ce=\EK:cl=30\Ej:cm=\EY%+ %+ :dc=\EQ:dl=\EM:\
+ :do=\EB:ei=:ho=\EH:ic=\EP:im=:le=^H:nd=\EC:pc=\200:se=\ER@:\
+ :sf=\Eq:so=\ERD:sr=\Ep:ta=^I:ue=\ER@:up=\EA:us=\ERH:
+# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
+# back/forth words. Put the function keys (f1-f10) where they can be
+# found, and turn off the other magic keys along the top row, except
+# for line/local. Do the magic appropriate to make the page shifts work.
+# Also toggle ^S/^Q for those of us who use Emacs.
+t16|teleray 16:\
+ :am:da:db:mi:xs:xt:\
+ :co#80:li#24:\
+ :al=\E[L:bl=^G:cd=\E[0J:ce=\E[0K:cl=\E[H\E[2J:\
+ :cm=%i\E[%d;%df:cr=^M:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:\
+ :ho=\E[H:im=\E[4h:k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:\
+ :k7=^Z7:k8=^Z8:k9=^Z9:k;=^Z0:le=^H:me=\E[m:nd=\E[C:se=\E[m:\
+ :sf=^J:so=\E[7m:sr=\E[T:ta=^I:te=\E[V\E[24;1f\E[?38h:\
+ :ti=\E[U\E[?38l:ue=\E[m:up=\E[A:us=\E[4m:
+
+#### Texas Instruments (ti)
+#
+
+# The Silent 700 was so called because it was built around a quiet thermal
+# printer. It was portable, equipped with an acoustic coupler, and pretty
+# neat for its day.
+ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800:\
+ :bs:hc:os:\
+ :co#80:\
+ :bl=^G:cr=162\r:do=^J:le=^H:sf=^J:
+
+#
+# Texas Instruments 916 VDT 7 bit control mode
+#
+ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL:\
+ :da:db:in:ms:\
+ :%9=^X:@4=\E[29~:@8=^J:AL=36\E[%dL:DC=250\E[%dP:DL=\E[%dM:\
+ :DO=\E[%dB:F1=\E[29~:F2=\E[31~:IC=250\E[%d@:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:ae=2\017:as=2\016:bt=\E[Z:cb=\E[1K:\
+ :cd=6\E[J:ce=\E[0K:ch=\E[%+^AG:cl=6\E[H\E[2J:\
+ :cm=\E[%i%d;%dH:ct=\E[3g:cv=\E[%+^Ad:dc=\E[P:eA=\E(B\E)0:\
+ :ec=20\E[%dX:ei=:ff=^L:im=:ip=10:is=\E[1;24r\E[24;1H:\
+ :k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\
+ :k6=\E[23~:k7=\E[24~:k8=\E[25~:k9=\E[26~:k;=\E[28~:\
+ :kD=\E[P:kI=\E[@:kN=\E[S:kP=\E[T:kh=\E[H:mp=\E&:rs=\E[!p:\
+ :sa@:st=\E[0W:vb=6\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
+ :tc=vt220:
+#
+# Texas Instruments 916 VDT 8 bit control mode
+#
+ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL:\
+ :%9=^X:@4=\23329~:@8=^J:F1=\23329~:F2=\23331~:k1=\23317~:\
+ :k2=\23318~:k3=\23319~:k4=\23320~:k5=\23321~:k6=\23323~:\
+ :k7=\23324~:k8=\23325~:k9=\23326~:k;=\23328~:kD=\233P:\
+ :kI=\233@:kN=\233S:kP=\233T:kd=\233B:kh=\233H:kl=\233D:\
+ :kr=\233C:ku=\233A:tc=ti916:
+#
+# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
+#
+ti916-132|Texas Instruments 916 VDT vt220 132 column:\
+ :co#132:tc=ti916:
+#
+# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
+#
+ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column:\
+ :co#132:tc=ti916-8:
+ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL:\
+ :am:bs:xo:\
+ :co#80:it#8:li#24:\
+ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
+ :cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dl=\E[M:\
+ :do=\E[B:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[16~:\
+ :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[P:kI=\E[@:\
+ :kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=\E[D:mb=\E[5m:\
+ :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:rc=\E8:sc=\E7:se=\E[m:\
+ :sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:up=\E[A:\
+ :us=\E[4m:ve=\E[?25h:vi=\E[?25l:vs=\E[?31h:
+ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL:\
+ :am:xo:\
+ :co#80:it#8:li#24:\
+ :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[2J\E[H:\
+ :cm=%i\E[%d;%dH:cr=^M:cs=%i\E[%d;%dr:ct=\E[3g:dl=\E[M:\
+ :do=\E[B:ho=\E[H:k1=17P\217>:k2=17Q\217>:k3=17R\217>:\
+ :k4=17S\217>:k5=3316~\23316>:k6=3317~\23317>:\
+ :k7=3318~\23318>:k8=3319~\23319>:k9=3320~\23320>:\
+ :kD=33P\233>:kI=33@\233>:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:\
+ :ku=\E[A:le=\E[D:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:\
+ :nd=\E[C:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:\
+ :st=\EH:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[?25h:\
+ :vi=\E[?25l:vs=\E[?31h:
+ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode:\
+ :co#132:tc=ti924:
+ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode:\
+ :co#132:tc=ti924-8:
+ti931|Texas Instruments 931 VDT:\
+ :am:bs:xo:\
+ :co#80:li#24:\
+ :al=\EN:bl=^G:cd=\EJ:ce=\EI:cl=\EL:cm=\EY%+ %+ :cr=^M:\
+ :dc=\EQ:dl=\EO:do=\EB:ei=:ho=\EH:ic=\ER\EP\EM:im=:\
+ :is=\EGB\E(@B@@\E):k1=\Ei1:k2=\Ei2:k3=\Ei3:k4=\Ei4:\
+ :k5=\Ei5:k6=\Ei6:k7=\Ei7:k8=\Ei8:k9=\Ei9:kA=\EN:kD=\EQ:\
+ :kI=\EP:kL=\EO:kd=\EB:kl=\ED:kr=\EC:ku=\EA:le=\ED:mb=\E4P:\
+ :me=\E4@:mk=\E4H:mr=\E4B:nd=\EC:se=\E4@:sf=\Ea:so=\E4A:\
+ :sr=\Eb:ue=\E4@:up=\EA:us=\E4D:ve=\E4@:
+ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL:\
+ :cs@:sf=\E[1S:sr=\E[1T:tc=ti924:
+# (ti926-8: I corrected this from the broken SCO entry -- esr)
+ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL:\
+ :cs@:sf=\2331S:sr=\2331T:tc=ti924-8:
+ti_ansi|basic entry for ti928:\
+ :am:eo:ut:xn:xo:\
+ :Co#8:co#80:it#8:li#25:pa#64:\
+ :@7=\E[F:AB=\E[4%dm:AF=\E[3%dm:al=\E[L:bl=^G:bt=\E[Z:\
+ :cd=\E[J:ce=\E[K:cl=\E[2J\E[H:cm=\E[%i%d;%dH:cr=^M:\
+ :cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:do=\E[B:ei=:ho=\E[H:\
+ :ic=\E[@:im=:k0=\E[V:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:\
+ :k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:kN=\E[G:kP=\E[I:\
+ :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\
+ :mb=\E[5m:md=\E[1m:me=\E[m:nd=\E[C:op=\E[37;40m:se=\E[m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+#
+# 928 VDT 7 bit control mode
+#
+ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL:\
+ :%9=\E[35~:@7=\E_1\E\\:@8=\E[8~:F1=\E[29~:F2=\E[31~:\
+ :F3=\E[32~:F5=\E[34~:k1=\E[17~:k2=\E[18~:k3=\E[19~:\
+ :k4=\E[20~:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:\
+ :k9=\E[26~:k;=\E[28~:kD=\E[P:kI=\E[@:kN=\E[S:kP=\E[T:\
+ :tc=ti_ansi:
+#
+# 928 VDT 8 bit control mode
+#
+ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL:\
+ :%9=\23335~:@7=\2371\234:@8=\2338~:F1=\23329~:F2=\23331~:\
+ :F3=\23332~:F5=\23334~:k1=\23317~:k2=\23318~:k3=\23319~:\
+ :k4=\23320~:k5=\23321~:k6=\23323~:k7=\23324~:k8=\23325~:\
+ :k9=\23326~:k;=\23328~:kD=\233P:kI=\233@:kN=\233S:\
+ :kP=\233T:kh=\233H:tc=ti_ansi:
+
+#### Zentec (zen)
+#
+
+# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
+# had just :so:=\EG6 which I think means standout was supposed to be
+# dim-reverse using ADM12-style attributes. ADM12 :us:/:ue: and
+# <invis> might work-- esr)
+zen30|z30|zentec 30:\
+ :am:bs:mi:ul:\
+ :co#80:li#24:\
+ :al=1.5*\EE:bl=^G:cd=\EY:ce=1.0*\ET:cl=\E*:cm=\E=%+ %+ :\
+ :cr=^M:dc=\EW:dl=1.5*\ER:do=^J:ei=\Er:ho=^^:im=\Eq:le=^H:\
+ :mh=\EG2:nd=^L:sf=^J:so=\EG6:ue@:up=^K:us@:tc=adm+sgr:
+# (zen50: this had extension capabilities
+# :BS=^U:CL=^V:CR=^B:
+# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
+# which were also in the original entry -- esr)
+# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
+zen50|z50|zentec zephyr:\
+ :am:bs:\
+ :co#80:li#24:sg#1:\
+ :al=\EE:cd=\EY:ce=\ET:cl=\E+:cm=\E=%+ %+ :dc=\EW:dl=\ER:ei=:\
+ :ic=\EQ:im=:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:le=^H:mk@:ue@:up=^K:\
+ :us@:tc=adm+sgr:
+
+# CCI 4574 (Office Power) from Will Martin <[email protected]> via BRL
+cci|cci1|z8001|zen8001|CCI Custom Zentec 8001:\
+ :am:bs:bw:\
+ :co#80:li#24:\
+ :cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :cs=\ER%+ %+ :do=^J:\
+ :ho=\EH:is=\EM \EF\ET\EP\ER 7:kb=^H:kd=\EB:kh=\EH:kl=\ED:\
+ :kr=\EC:ku=\EA:le=^H:mb=\EM":me=\EM\040:mh=\EM!:mk=\EM(:\
+ :mr=\EM$:nd=\EC:pf=^T:po=^R:se=\EM\040:so=\EM$:sr=\EI:\
+ :ue=\EM\040:up=\EA:us=\EM0:ve=\EP:vs=\EF\EQ\EM \ER 7:
+
+######## OBSOLETE UNIX CONSOLES
+#
+
+#### Apollo consoles
+#
+# Apollo got bought by Hewlett-Packard. The Apollo workstations are
+# labeled HP700s now.
+#
+
+# From: Gary Darland <[email protected]>
+apollo|apollo console:\
+ :am:bs:mi:\
+ :co#88:li#53:\
+ :al=\EI:cd=\EJ:ce=\EK:ch=\EN%d:cl=^L:cm=\EM%+ %d):\
+ :cv=\EO+\040:dc=\EP:dl=\EL:do=\EB:ei=\ER:im=\EQ:le=^H:\
+ :nd=\EC:se=\ET:sf=\EE:so=\ES:sr=\ED:te=\EX:ti=\EW:ue=\EV:\
+ :up=\EA:us=\EU:
+
+# We don't know whether or not the apollo guys replicated DEC's firmware bug
+# in the VT132 that reversed :ei:/:im:. To be on the safe side, disable
+# both these capabilities.
+apollo_15P|apollo 15 inch display:\
+ :ei@:im@:tc=vt132:
+apollo_19L|apollo 19 inch display:\
+ :ei@:im@:tc=vt132:
+apollo_color|apollo color display:\
+ :ei@:im@:tc=vt132:
+
+#### Convergent Technology
+#
+# Burroughs bought Convergent shortly before it merged with Univac.
+# CTOS is (I believe) dead. Probably the aws is too (this entry dates
+# from 1991 or earlier).
+#
+
+# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
+# (aws: removed unknown :dn=^K: -- esr)
+aws|Convergent Technologies AWS workstation under UTX and Xenix:\
+ :am:\
+ :co#80:li#28:sg#0:ug#0:\
+ :ac=:ae=\EAAF:al=\EIL:as=\EAAN:bc=^H:cd=\EEF:ce=\EEL:\
+ :ch=\EH%.:cl=^L:cm=\EC%r%.%.:cv=\EV%.:dc=\EDC:dl=\EDL:\
+ :do=^K:ei=:ic=\EIC:im=:kb=^H:kd=^K:kl=^N:kr=^R:ku=^A:\
+ :ma=\016h\013j\001k\022l\002m:nd=^R:nl=^J:se=\EARF:\
+ :sf=\ESU:so=\EARN:sr=\ESD:ue=\EAUF:up=^A:us=\EAUN:
+awsc|Convergent Technologies AWS workstation under CTOS:\
+ :am:\
+ :co#80:li#24:sg#0:ug#0:\
+ :ac=:ae=\EAAF:as=\EAAN:bc=^N:cd=\EEF:ce=\EEL:cl=^L:\
+ :cm=\EC%r%.%.:do=^K:kb=^H:kd=^K:kl=^N:kr=^R:ku=^A:\
+ :ma=\016h\013j\001k\022l\002m:nd=^R:se=\EAA:so=\EAE:\
+ :ue=\EAA:up=^A:us=\EAC:
+
+#### DEC consoles
+#
+
+# The MicroVax console. Tim Theisen <[email protected]> writes:
+# The digital uVax II's had a graphic display called a qdss. It was
+# supposed to be a high performance graphic accelerator, but it was
+# late to market and barely appeared before faster dumb frame buffers
+# appeared. I have only used this display while running X11. However,
+# during bootup, it was in text mode, and probably had a terminal emulator
+# within it. And that is what your termcap entry is for. In graphics
+# mode the screen size is 1024x864 pixels.
+qdss|qdcons|qdss glass tty:\
+ :am:bs:\
+ :co#128:li#57:\
+ :cl=1\032:cm=\E=%.%.:do=^J:le=^H:nd=^L:up=^K:
+
+#### Fortune Systems consoles
+#
+# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
+# in their day; I (esr) used one myself for a year or so around 1984.
+# They had no graphics, though, and couldn't compete against Suns and
+# the like. R.I.P.
+#
+
+# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
+# (This had extension capabilities
+# :rv=\EH:re=\EI:rg=0:GG=0:\
+# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
+# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
+# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
+# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
+# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
+# to force both magic cookie glitches off. Once upon a time, I
+# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
+# function keys; thus the "Al" value for HM was certainly an error. I renamed
+# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
+# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
+# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
+# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
+fos|fortune|Fortune system:\
+ :am:bs:bw:\
+ :co#80:li#25:\
+ :@7=^Ak\r:@8=^Aq:ac=j*k(l m"q&v%w#x-:ae=^O:al=15\034E:\
+ :as=\Eo:bl=^G:cd=3*\034Y:ce=^\Z:cl=20\014:cm=\034C%+ %+ :\
+ :cr=^M:dc=5\034W:dl=15\034R:do=3\n:ei=:ho=10\036:ic=5\034Q:\
+ :im=:is=^_..:k1=^Aa\r:k2=^Ab\r:k3=^Ac\r:k4=^Ad\r:k5=^Ae\r:\
+ :k6=^Af\r:k7=^Ag\r:k8=^Ah\r:kN=^Ao\r:kP=^An\r:kb=^H:\
+ :kd=^Ay\r:kh=^A?\r:kl=^Aw\r:kr=^Az\r:ku=^Ax\r:le=^H:mb=\EN:\
+ :me=\EI:mr=\EH:nw=^M^J:se=^\I`:sf=^J:so=^\H`:ta=^Z:ue=^\IP:\
+ :up=3\013:us=^\HP:ve=\E\\:vi=\E]:vs=\E\072:
+
+#### Masscomp consoles
+#
+# Masscomp has gone out of business. Their product line was purchased by
+# comany in Georgia (US) called "XS International", parts and service may
+# still be available through them.
+#
+
+# (masscomp: ":MT:" changed to ":km:"; -- esr)
+masscomp|masscomp workstation console:\
+ :bs:km:mi:\
+ :co#80:it#8:li#24:\
+ :al=\E[L:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%d;%dH:dc=\E[P:\
+ :dl=\E[M:do=\E[B:ei=\E[4l:im=\E[4h:is=\EGc\EGb\EGw:kb=^H:\
+ :kd=\EOB:kl=\EOD:kr=\EOC:ku=\EOA:le=^H:nd=\E[C:se=\E[m:\
+ :so=\E[7m:ta=^I:ue=\EGau:up=\E[A:us=\EGu:
+masscomp1|masscomp large screen version 1:\
+ :co#104:li#36:tc=masscomp:
+masscomp2|masscomp large screen version 2:\
+ :co#64:li#21:tc=masscomp:
+
+######## OTHER OBSOLETE TYPES
+#
+# These terminals are *long* dead -- these entries are retained for
+# historical interest only.
+#
+
+#### Obsolete non-ANSI software emulations
+#
+
+# CTRM terminal emulator
+# 1. underlining is not allowed with colors: first, is is simulated by
+# black on white, second, it disables background color manipulations.
+# 2. BLINKING, REVERSE and BOLD are allowed with colors,
+# so we have to save their status in the static registers A, B and H
+# respectively, to be able to restore them when color changes
+# (because any color change turns off ALL attributes)
+# 3. :md: and :mr: sequences alternate modes,
+# rather than simply entering them. Thus we have to check the
+# static register B and H to determine the status, before sending the
+# escape sequence.
+# 4. :me: now must set the status of all 3 register (A,B,H) to zero
+# and then reset colors
+# 5. implementation of the protect mode would badly penalize the performance.
+# we would have to use \E&bn sequence to turn off colors (as well as all
+# other attributes), and keep the status of protect mode in yet another
+# static variable. If someone really needs this mode, they would have to
+# create another terminfo entry.
+# 6. original color-pair is white on black.
+# store the information about colors into static registers
+# 7. set foreground color. it performs the following steps.
+# 1) turn off all attributes
+# 2) turn on the background and video attributes that have been turned
+# on before (this information is stored in static registers X,Y,Z,A,B,H,D).
+# 3) turn on foreground attributes
+# 4) store information about foreground into U,V,W static registers
+# 8. turn on background: similar to turn on foreground above
+ctrm|C terminal emulator:\
+ :am:ut:xo:\
+ :Co#8:NC#2:Nl#0:co#80:lh#0:li#24:lm#0:lw#0:pa#63:pb#19200:vt#6:\
+ :al=\EL:bl=^G:bt=\Ei:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:\
+ :cm=\E&a%r%dc%dY:cr=^M:ct=\E3:cv=\E&a%dY:dc=2\EP:dl=\EM:\
+ :do=^J:ei=\ER:im=\EQ:ip=2:is=\E&jA\r:k1=\Ep\r:k2=\Eq\r:\
+ :k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:k8=\Ew\r:\
+ :kb=^H:kd=\Ew\r:ke=\E&jA:kh=\Ep\r:kl=\Eu\r:kr=\Ev\r:\
+ :ks=\E&jB:ku=\Et\r:le=^H:mb=\E&dA%{1}%PA:\
+ :md=%?%gH%{0}%=%t\E&dH%{1}%PH%;:\
+ :me=\E&d@%{0}%PA%{0}%PB%{0}%PH:\
+ :mr=%?%gB%{0}%=%t\E&dB%{1}%PB%;:nd=\EC:\
+ :op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU:\
+ :sf=^J:so=\E&dD:st=\E1:ta=2\011:up=\EA:us=\E&dD:
+
+# gs6300 - can't use blue foreground, it clashes with underline;
+# it's simulated with cyan
+# Bug: The <op> capability probably resets attributes.
+# (gs6300: commented out <rmln> (no <smln>) --esr)
+gs6300|emots|AT&T PC6300 with EMOTS terminal emulator:\
+ :am:ms:ut:xo:\
+ :Co#8:co#80:it#8:li#24:pa#63:\
+ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
+ :LE=\E[%dD:RI=\E[%dC:Sb=\E[?;%dm:UP=\E[%dA:\
+ :ac=++,,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=\E[10m:al=\E[L:as=\E[11m:bl=^G:cd=\E[J:ce=\E[K:\
+ :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:\
+ :ei=:ho=\E[H:ic=\E[@:im=:is=\E[m:k1=\E[0s:k2=\E[24s:\
+ :k3=\E[1s:k4=\E[23s:k5=\E[2s:k6=\E[22s:k7=\E[3s:k8=\E[21s:\
+ :kB=^R^I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\
+ :le=^H:mb=\E[5m:md=\E[1m:me=\E[m\E[10m:mr=\E[7m:nd=\E[C:\
+ :op=\E[?;m:pf=\E[4i:po=\E[5i:r1=\Ec:sf=^J:so=\E[1m:sr=\E[L:\
+ :ta=^I:up=\E[A:us=\E[4m:
+
+# From: <[email protected]> 29 Oct 85 05:40:18 GMT
+# MS-Kermit with Heath-19 emulation mode enabled
+# (h19k: changed ":pt@:" to ":it@"
+h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin):\
+ :am@:da:db:xt:\
+ :it@:\
+ :ta@:tc=h19-u:
+
+# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
+# Software (formerly Peripherals Computers & Supplies, Inc) of
+# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
+# also be reached at [email protected].
+versaterm|versaterm vt100 emulator for the macintosh:\
+ :am:xn:\
+ :co#80:it#8:li#24:\
+ :al=9\E[1L:bl=^G:cd=50\E[J:ce=3\E[K:cl=50\E[;H\E[2J:\
+ :cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=7\E[1P:\
+ :dl=9\E[1M:do=^J:ei=:ho=\E[H:ic=7\E[1@:im=:\
+ :is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+ :kb=^H:kd=\EOB:ke=\E>\E[?1l:kl=\EOD:kr=\EOC:ks=\E=\E[?1h:\
+ :ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:me=2\E[m:mr=2\E[7m:\
+ :nd=2\E[C:nw=^M^J:r1=\E>:rc=\E8:\
+ :rf=/usr/share/tabset/vt100:sc=\E7:se=2\E[m:so=2\E[7m:\
+ :sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:us=2\E[4m:
+
+# From: Rick Thomas <ihnp4!btlunix!rbt>
+# (xtalk: I added <rmam>/<smam> based on the init string.
+xtalk|IBM PC with xtalk communication program (versions up to 3.4):\
+ :am:mi:ms:xo:\
+ :co#80:it#8:li#24:sg#1:vt#3:\
+ :DO=\E[%dB:LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:\
+ :UP=\E[%dA:\
+ :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\
+ :ae=^O:al=99\E[L:as=^N:bl=^G:cb=3\E[1K:cd=50\E[J:ce=3\E[K:\
+ :cl=50\E[H\E[J:cm=5\E[%i%d;%dH:cr=^M:ct=\E[3g:dl=99\E[M:\
+ :do=^J:eA=\E(B\E)0:ho=\E[H:kb=^H:kd=\EOB:ke=\E[?1l\E>:\
+ :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:me=\E[m:\
+ :nd=2\E[C:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\
+ :se=\E[m\040:sf=^J:so=\E[7m\040:sr=5\EM:st=\EH:ta=^I:\
+ :up=2\E[A:tc=vt100+fnkeys:
+
+# The official PC terminal emulator program of the AT&T Product Centers.
+# Note - insert mode commented out - doesn't seem to work on AT&T PC.
+simterm|attpc running simterm:\
+ :am:\
+ :co#80:li#24:\
+ :al=\EL:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\E=%+ %+ :cr=^M:\
+ :dc=\ER:dl=\EM:do=\EB:ho=\EH:le=^H:me=\E&d@:nd=\EC:se=\E&d@:\
+ :sf=^J:so=\E&dB:te=\EVE:ti=\EVS:up=\EA:
+
+#### Daisy wheel printers
+#
+# This section collects Diablo, DTC, Xerox, Qume, and other daisy
+# wheel terminals. These are now largely obsolete.
+#
+
+# (diablo1620: removed :if=/usr/share/tabset/xerox1720:, no such file -- esr)
+diablo1620|diablo1720|diablo450|ipsi|diablo 1620:\
+ :hc:os:\
+ :co#132:it#8:\
+ :ch=\E\011%i%.:ct=\E2:do=^J:hd=\ED:hu=\EU:kb=^H:le=^H:\
+ :st=\E1:ta=^I:up=\E^J:
+diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin:\
+ :co#124:\
+ :is=\r \E9:tc=diablo1620:
+# (diablo1640: removed :if=/usr/share/tabset/xerox1730:, no such file -- esr)
+diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640:\
+ :bl=^G:se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
+# (diablo1640-lm: removed :if=/usr/share/tabset/xerox1730-lm:, no such
+# file -- esr)
+diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin:\
+ :co#124:\
+ :se=\E&:so=\EW:ue=\ER:us=\EE:tc=diablo1620:
+diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer:\
+ :tc=diablo1640-lm:
+# DTC 382 with VDU. Has no :cd: so we fake it with :ce:. Standout
+# :so=^P\s\002^PF: works but won't go away without dynamite :se=^P\s\0:.
+# The terminal has tabs, but I'm getting tired of fighting the braindamage.
+# If no tab is set or the terminal's in a bad mood, it glitches the screen
+# around all of memory. Note that return puts a blank ("a return character")
+# in the space the cursor was at, so we use ^P return (and thus ^P newline for
+# newline). Note also that if you turn off :pt: and let Unix expand tabs,
+# curses won't work (some old BSD versions) because it doesn't clear this bit,
+# and cursor addressing sends a tab for row/column 9. What a losing terminal!
+# I have been unable to get tabs set in all 96 lines - it always leaves at
+# least one line with no tabs in it, and once you tab through that line,
+# it completely weirds out.
+# (dtc382: change :te: to :ti: -- it just does a clear --esr)
+dtc382|DTC 382:\
+ :am:da:db:xs:\
+ :co#80:li#24:lm#96:\
+ :al=^P^Z:bl=^G:cd=\020\025\020\023\020\023:ce=^P^U:\
+ :cl=20\020\035:cm=\020\021%r%.%.:cr=^P^M:dc=^X:dl=^P^S:\
+ :ei=^Pi:ho=^P^R:im=^PI:le=^H:nd=^PR:pc=\177:sf=^J:te=:\
+ :ti=20\020\035:ue=^P \200:up=^P^L:us=^P ^P:ve=^Pb:vs=^PB:
+dtc300s|DTC 300s:\
+ :hc:os:\
+ :co#132:\
+ :bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:le=^H:\
+ :sf=^J:st=\E1:ta=^I:up=^Z:
+gsi|mystery gsi terminal:\
+ :hc:os:\
+ :co#132:\
+ :bl=^G:cr=^M:do=^J:hd=\Eh:hu=\EH:le=^H:sf=^J:ta=^I:up=^Z:
+aj830|aj832|aj|anderson jacobson:\
+ :hc:os:\
+ :bl=^G:cr=^M:do=^J:hd=\E9:hu=\E8:le=^H:sf=^J:up=\E7:
+# From: Chris Torek <[email protected]> Thu, 7 Nov 85 18:21:58 EST
+aj510|Anderson-Jacobson model 510:\
+ :am:mi:\
+ :co#80:li#24:\
+ :al=2*\E&I:cd=\E'P:ce=\E'L:cl=^L:cm=\E#%+ %+ :dc=.1*\E'D:\
+ :dl=2*\E&D:ei=\E'J:ic=:im=\E'I:ip=.1*:kd=\EZ:kl=\EW:kr=\EX:\
+ :ku=\EY:le=^H:nd=\EX:pc=\177:se=\E"I:so=\E"I:te=\E"N:\
+ :ti=\E"N:ue=\E"U:up=\EY:us=\E"U:
+# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
+# This is incomplete, but it's a start.
+nec5520|nec|spinwriter|nec 5520:\
+ :hc:os:\
+ :co#132:it#8:\
+ :bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\E]s\n\E]W:\
+ :hu=\E]s\E9\E]W:kb=^H:le=^H:sf=^J:st=\E1:ta=^I:up=\E9:
+qume5|qume|Qume Sprint 5:\
+ :hc:os:\
+ :co#80:it#8:\
+ :bl=^G:cr=^M:ct=\E3:do=^J:ff=^L:hd=\Eh:hu=\EH:kb=^H:le=^H:\
+ :sf=^J:st=\E1:ta=^I:up=^Z:
+# I suspect the xerox 1720 is the same as the diablo 1620.
+xerox1720|x1720|x1750|xerox 1720:\
+ :hc:os:\
+ :co#132:it#8:\
+ :bl=^G:cr=^M:ct=\E2:do=^J:ff=^L:le=^H:sf=^J:st=\E1:ta=^I:
+
+#### Miscellaneous obsolete terminals, manufacturers unknown
+#
+# If you have any information about these (like, a manufacturer's name,
+# and a date on the serial-number plate) please send it!
+
+cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars:\
+ :am:bs:\
+ :co#73:li#36:\
+ :cl=^Z:ho=^^:le=^H:nd=^L:up=^K:
+cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars:\
+ :am:bs:\
+ :co#85:li#39:\
+ :cl=^Z:ho=^^:k1=\E5:k2=\E6:k3=\E7:k4=\E8:kd=\E2:kl=\E3:\
+ :kr=\E4:ku=\E1:le=^H:nd=^L:se=\Em^C:so=\Em^L:up=^K:
+cops10|cops|cops-10|cops 10:\
+ :am:bw:\
+ :co#80:li#24:\
+ :bl=^G:cd=^W:ce=^V:cl=30\030:cm=\020%+ %+ :cr=^M:do=^J:\
+ :kb=^H:kd=^J:kh=^Y:kl=^H:kr=^L:ku=^K:le=^H:nd=^L:sf=^J:up=^K:
+# (d132: removed duplicate :ic=\E5:,
+# merged in capabilities from a BRL entry -- esr)
+d132|datagraphix|datagraphix 132a:\
+ :da:db:in:\
+ :co#80:li#30:\
+ :al=\E3:bl=^G:cl=^L:cm=\E8%i%3%3:cr=^M:dc=\E6:do=^J:ei=:\
+ :ho=\ET:ic=\E5:im=:kb=^H:kd=^J:kl=^H:le=^H:nd=\EL:nw=^M^J:\
+ :sf=^J:sr=\Ew:ta=^I:up=\EK:ve=\Em\En:vs=\Ex:
+# The d800 was an early portable terminal from c.1984-85 that looked a lot
+# like the original Compaq `lunchbox' portable (but no handle). It had a vt220
+# mode (which is what this entry looks like) and several other lesser-known
+# emulations.
+d800|Direct 800/A:\
+ :am:bs:da:db:ms:xs:\
+ :co#80:it#8:li#24:\
+ :ac=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~:\
+ :ae=\E[m:as=\E[1m:bl=^G:cd=\E[J:ce=\E[K:cl=\E[1;1H\E[2J:\
+ :cm=\E[%i%d;%dH:cr=^M:do=^J:k1=\EOP:k2=\EOQ:k3=\EOR:\
+ :k4=\EOS:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:kd=\E[B:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:sf=\ED:\
+ :so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:ve=\E[>12h:\
+ :vs=\E[>12l:
+digilog|digilog 333:\
+ :bs:\
+ :co#80:li#16:\
+ :bl=^G:ce=^X:cr=^M:do=^J:ho=^N:le=^H:nd=^I:sf=^J:up=^O:
+# The DWK was a terminal manufactured in the Soviet Union c.1986
+dwk|dwk-vt|dwk terminal:\
+ :am:\
+ :co#80:it#8:li#24:\
+ :ac=+\136,Q-S.M0\177`+a\072f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_:\
+ :ae=\EG:as=\EF:bl=^G:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :\
+ :cr=^M:dc=\EP:do=^J:ei=:ho=\EH:ic=\EQ:im=:k1=\Ef1:k2=\Ef2:\
+ :k3=\Ef3:k4=\Ef4:k5=\Ef5:k6=\Ef6:k7=\Ef7:k8=\Ef8:k9=\Ef9:\
+ :k;=\Ef0:kD=\Ee:kI=\Ed:kN=\Eh:kP=\Eg:kb=\177:kd=\EB:kl=\ED:\
+ :kr=\EC:ku=\EA:le=^H:me=\EX:mr=\ET:nd=\EC:nw=^M^J:se=\EX:\
+ :sf=^J:so=\ET:sr=\ES:ta=^I:up=\EA:
+env230|envision230|envision 230 graphics terminal:\
+ :xn@:\
+ :pf=\E[4i:po=\E[5i:ps=\E[0i:tc=vt100:
+# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
+# coupler attached, the whole rig fitting in a suitcase and more or less
+# portable. Hot stuff for c.1977 :-) -- esr
+ep48|ep4080|execuport 4080:\
+ :am:bs:os:\
+ :co#80:\
+ :bl=^G:cr=^M:do=^J:hd=^\:hu=^^:le=^H:sf=^J:
+ep40|ep4000|execuport 4000:\
+ :co#136:tc=ep4080:
+# Adam Thompson <[email protected]> tells us:
+# Informer series - these are all portable units, resembling older
+# automatic bread-baking machines. The terminal looks like a `clamshell'
+# design, but isn't. The structure is similar to the Direct terminals,
+# but only half the width. The entire unit is only about 10" wide.
+# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
+# keyboard. All the keys are crammed together, much like some laptop
+# PCs today, but perhaps less well organized...all these units have a
+# bewildering array of plugs on the back, including a built-in modem.
+# The 305 was a color version of the 304; the 306 and 307 were mono and
+# color terminals built for IBM bisync protocols.
+# From: Paul Leondis <[email protected]>
+ifmr|Informer D304:\
+ :am:bs:\
+ :co#80:li#24:\
+ :cd=\E/:ce=\EQ:cl=\EZ:cm=\EY%r%+ %+ :dc=\E\\:do=^J:ei=:\
+ :ho=\EH:ic=\E[:im=:le=^H:me=\EK:nd=\EC:se=\EK:so=\EJ:sr=\En:\
+ :up=\EA:
+# Entry largely based on wy60 and has the features of wy60ak.
+# (sgr removed to fit entry within 1023 bytes)
+# (rmacs/smacs removed for consistency)
+# (acsc removed to fit entry within 1023 bytes)
+# (terminfo-only capabilities suppressed to fit entry within 1023 bytes)
+opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys:\
+ :am:bw:hs:km:mi:ms:ul:xo:\
+ :co#80:li#24:ws#80:\
+ :al=4\EE:bl=^G:bt=\EI:cd=100\EY:ce=\ET:cl=100\E*:\
+ :cm=\Ea%i%dR%dC:cr=^M:ct=\E0:dc=11\EW:dl=5\ER:do=^J:\
+ :ds=\Ez(\r:ei=\Er:fs=^M:ho=2\036:\
+ :if=/usr/share/tabset/std:im=\Eq:ip=3:\
+ :is=\E`\072\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12:\
+ :k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
+ :k7=^AF\r:k8=^AG\r:k9=^AH\r:kD=\EW:kI=\EQ:kN=\EK:kP=\EJ:\
+ :kb=^H:kd=\E[B:kh=^^:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\EG2:\
+ :me=\EcD:mh=\EGp:nd=^L:nw=3\r\n:sf=^J:sr=7\Ej:st=\E1:\
+ :ta=5\011:te=:\
+ :ti=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177:\
+ :ts=\Ez(:uc=\EG8\EG0:up=^K:ve=\E`1:vi=\E`0:tc=adm+sgr:
+teletec|Teletec Datascreen:\
+ :am:bs:\
+ :co#80:li#24:\
+ :bl=^G:cl=^L:cr=^M:do=^J:ho=^^:le=^H:nd=^_:sf=^J:up=^K:
+# From: Mark Dornfeld <[email protected]>
+# This description is for the LANPAR Technologies VISION 3220
+# terminal from 1984/85. The function key definitions k0-k5 represent the
+# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
+# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
+#
+# Kenneth Randell <[email protected]> writes on 31 Dec 1998:
+# I had a couple of scopes (3221) like this once where I used to work, around
+# the 1987 time frame if memory serves me correctly. These scopes were made
+# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
+# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
+# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
+# was like the VT-241 (color with Regis + Sixel Graphics). These terminals
+# (3221) cost about $1500 each, and one was always broken -- had to be sent
+# back to the shop for repairs.
+# The only real advantage these scopes had over the VT-240's were:
+# 1) They were faster in the Regis display, or at least the ones I did
+# 2) They had a handy debugging feature where you could split-screen the
+# scope, the graphics would appear on the top, and the REGIS commands would
+# appear on the bottom. I don't remember the VT-240s being able to do that.
+# I would swear that LANPAR Technologies was in MA someplace, but since I
+# don't work at the same place anymore, and those terminals and manuals were
+# long since junked, I cannot be any more sure than that.
+#
+# (v3220: removed obsolete ":kn#10:",
+# I added <rmam>/<smam> based on the init string -- esr)
+v3220|LANPAR Vision II model 3220/3221/3222:\
+ :am:bs:mi:xn:\
+ :co#80:it#8:li#24:\
+ :RA=\E[?7l:SA=\E[?7h:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:im=\E[4h:\
+ :is=\E>\E[?3l\E[?7h\E[?8h\E[p:k0=\E[1~:k1=\E[2~:\
+ :k2=\E[3~:k3=\E[4~:k4=\E[5~:k5=\E[6~:k6=\E[OP:k7=\E[OQ:\
+ :k8=\E[OR:k9=\E[OS:kd=\E[B:ke=\E>:kh=\E[H:kl=\E[D:kr=\E[C:\
+ :ks=\E=:ku=\E[A:le=^H:me=\E[m:nd=\E[C:se=\E[m:so=\E[7m:\
+ :sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m:
+######## ICH/ICH1 VERSUS RMIR/SMIR
+#
+# Some non-curses applications get confused if both ich/ich1 and rmir/smir
+# are present; the symptom is doubled characters in an update using insert.
+# These applications are technically correct; in both 4.3BSD termcap and
+# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
+# unless the terminal needs both. To my knowledge, no terminal still in this
+# file requires both other than the very obsolete dm2500.
+#
+# For ncurses-based applications this is not a problem, as ncurses uses
+# one or the other as appropriate but never mixes the two. Therefore we
+# have not corrected entries like `linux' and `xterm' that specify both.
+# If you see doubled characters from these, use the linux-nic and xterm-nic
+# entries that suppress ich/ich1. And upgrade to ncurses!
+#
+
+######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
+#
+# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
+# ECMA-48 standards are said to be almost identical, but are not the same
+# as X3.64 (though for practical purposes they are close supersets of it).
+#
+# You can obtain ECMA-48 for free by sending email to [email protected]
+# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
+# Coded Character Sets"), include your snail-mail address, and you should
+# receive the document in due course. Don't expect an email acknowledgement.
+#
+# Related standards include "X3.4-1977: American National Standard Code for
+# Information Interchange" (the ASCII standard) and "X3.41.1974:
+# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
+# American National Standard for Information Interchange." I believe (but
+# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
+# respectively.
+#
+
+#### VT100/ANSI/ECMA-48
+#
+# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
+# and ECMA-48 Control Functions for Coded Character Sets.
+#
+# Much of the content of this comment is adapted from a table prepared by
+# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
+# discussion of some terminfo-related issues, and updates to capture ECMA-48
+# have been added. Control functions described in ECMA-48 only are tagged
+# with * after their names.
+#
+# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
+# sequences. In the main table, \E stands for an escape (\033) character,
+# SPC for space. Pn stands for a single numeric parameter to be inserted
+# in decimal ASCII. Ps stands for a list of such parameters separated by
+# semicolons. Parameter meanings for most parametrized sequences are
+# decribed in the notes.
+#
+# Sequence Sequence Parameter or
+# Mnemonic Name Sequence Value Mode terminfo
+# -----------------------------------------------------------------------------
+# APC Applicatn Program Command \E _ - Delim -
+# BEL Bell * ^G - - bel
+# BPH Break Permitted Here * \E B - * -
+# BS Backpace * ^H - EF -
+# CAN Cancel * ^X - - - (A)
+# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
+# CCH Cancel Previous Character \E T - - -
+# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
+# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
+# CMD Coding Method Delimiter * \E
+# CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
+# CPL Cursor Preceding Line \E [ Pn F 1 eF -
+# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
+# CSI Control Sequence Intro \E [ - Intro -
+# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
+# CUB Cursor Backward \E [ Pn D 1 eF cub
+# CUD Cursor Down \E [ Pn B 1 eF cud
+# CUF Cursor Forward \E [ Pn C 1 eF cuf
+# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
+# CUU Cursor Up \E [ Pn A 1 eF cuu
+# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
+# DA Device Attributes \E [ Pn c 0 - -
+# DAQ Define Area Qualification \E [ Ps o 0 - -
+# DCH Delete Character \E [ Pn P 1 eF dch
+# DCS Device Control String \E P - Delim -
+# DL Delete Line \E [ Pn M 1 eF dl
+# DLE Data Link Escape * ^P - - -
+# DMI Disable Manual Input \E \ - Fs -
+# DSR Device Status Report \E [ Ps n 0 - - (I)
+# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
+# EA Erase in Area \E [ Ps O 0 eF - (J)
+# ECH Erase Character \E [ Pn X 1 eF ech
+# ED Erase in Display \E [ Ps J 0 eF ed (J)
+# EF Erase in Field \E [ Ps N 0 eF -
+# EL Erase in Line \E [ Ps K 0 eF el (J)
+# EM End of Medium * ^Y - - -
+# EMI Enable Manual Input \E b Fs -
+# ENQ Enquire ^E - - -
+# EOT End Of Transmission ^D - * -
+# EPA End of Protected Area \E W - - - (K)
+# ESA End of Selected Area \E G - - -
+# ESC Escape ^[ - - -
+# ETB End Transmission Block ^W - - -
+# ETX End of Text ^C - - -
+# FF Form Feed ^L - - -
+# FNK Function Key * \E [ Pn SPC W - - -
+# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
+# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
+# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
+# GSS Graphic Size Selection \E [ Pn SPC C none FE -
+# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
+# HPB Char Position Backward \E [ j 1 FE -
+# HPR Horz Position Relative \E [ Pn a 1 FE - (M)
+# HT Horizontal Tab * ^I - FE - (N)
+# HTJ Horz Tab w/Justification \E I - FE -
+# HTS Horizontal Tab Set \E H - FE hts
+# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
+# ICH Insert Character \E [ Pn @ 1 eF ich
+# IDCS ID Device Control String \E [ SPC O - * -
+# IGS ID Graphic Subrepertoire \E [ SPC M - * -
+# IL Insert Line \E [ Pn L 1 eF il
+# IND Index \E D - FE -
+# INT Interrupt \E a - Fs -
+# JFY Justify \E [ Ps SPC F 0 FE -
+# IS1 Info Separator #1 * ^_ - * -
+# IS2 Info Separator #1 * ^^ - * -
+# IS3 Info Separator #1 * ^] - * -
+# IS4 Info Separator #1 * ^\ - * -
+# LF Line Feed ^J - - -
+# LS1R Locking Shift Right 1 * \E ~ - - -
+# LS2 Locking Shift 2 * \E n - - -
+# LS2R Locking Shift Right 2 * \E } - - -
+# LS3 Locking Shift 3 * \E o - - -
+# LS3R Locking Shift Right 3 * \E | - - -
+# MC Media Copy \E [ Ps i 0 - - (S)
+# MW Message Waiting \E U - - -
+# NAK Negative Acknowledge * ^U - * -
+# NBH No Break Here * \E C - - -
+# NEL Next Line \E E - FE nel (D)
+# NP Next Page \E [ Pn U 1 eF -
+# NUL Null * ^@ - - -
+# OSC Operating System Command \E ] - Delim -
+# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
+# PFS Page Format Selection * \E Pn SPC J 0 - -
+# PLD Partial Line Down \E K - FE - (T)
+# PLU Partial Line Up \E L - FE - (U)
+# PM Privacy Message \E ^ - Delim -
+# PP Preceding Page \E [ Pn V 1 eF -
+# PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
+# PPB Page Position Backward * \E [ Pn SPC R 1 FE -
+# PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
+# PTX Parallel Texts * \E [ \ - - -
+# PU1 Private Use 1 \E Q - - -
+# PU2 Private Use 2 \E R - - -
+# QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
+# REP Repeat Char or Control \E [ Pn b 1 - rep
+# RI Reverse Index \E M - FE - (V)
+# RIS Reset to Initial State \E c - Fs -
+# RM Reset Mode * \E [ Ps l - - - (W)
+# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
+# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
+# SCI Single-Char Introducer \E Z - - -
+# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
+# SCS Set Char. Spacing * \E [ Pn SPC g - - -
+# SD Scroll Down \E [ Pn T 1 eF rin
+# SDS Start Directed String * \E [ Pn ] 1 - -
+# SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
+# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
+# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
+# SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
+# SI Shift In ^O - - - (P)
+# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
+# SL Scroll Left \E [ Pn SPC @ 1 eF -
+# SLH Set Line Home * \E [ Pn SPC U - - -
+# SLL Set Line Limit * \E [ Pn SPC V - - -
+# SLS Set Line Spacing * \E [ Pn SPC h - - -
+# SM Select Mode \E [ Ps h none - - (W)
+# SO Shift Out ^N - - - (Q)
+# SOH Start Of Heading * ^A - - -
+# SOS Start of String * \E X - - -
+# SPA Start of Protected Area \E V - - - (Z)
+# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
+# SPH Set Page Home * \E [ Ps SPC G - - -
+# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
+# SPL Set Page Limit * \E [ Ps SPC j - - -
+# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
+# SR Scroll Right \E [ Pn SPC A 1 eF -
+# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
+# SRS Start Reversed String * \E [ Ps [ 0 - -
+# SSA Start of Selected Area \E F - - -
+# SSU Select Size Unit * \E [ Pn SPC I 0 - -
+# SSW Set Space Width * \E [ Pn SPC [ none - -
+# SS2 Single Shift 2 (G2 set) \E N - Intro -
+# SS3 Single Shift 3 (G3 set) \E O - Intro -
+# ST String Terminator \E \ - Delim -
+# STAB Selective Tabulation * \E [ Pn SPC ^ - - -
+# STS Set Transmit State \E S - - -
+# STX Start pf Text * ^B - - -
+# SU Scroll Up \E [ Pn S 1 eF indn
+# SUB Substitute * ^Z - - -
+# SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
+# SYN Synchronous Idle * ^F - - -
+# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
+# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
+# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
+# TBC Tab Clear \E [ Ps g 0 FE tbc
+# TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
+# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
+# TSS Thin Space Specification \E [ Pn SC E none FE -
+# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
+# VPB Line Position Backward * \E [ Pn k 1 FE -
+# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
+# VT Vertical Tabulation * ^K - FE -
+# VTS Vertical Tabulation Set \E J - FE -
+#
+# ---------------------------------------------------------------------------
+#
+# Notes:
+#
+# Some control characters are listed in the ECMA-48 standard without
+# being assigned functions relevant to terminal control there (they
+# referred to other standards such as ISO 1745 or ECMA-35). They are listed
+# here anyway for completeness.
+#
+# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
+#
+# (B) There seems to be some confusion abroad between CHA and HPA. Most
+# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
+# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
+# preserved the CHA abbreviation.
+#
+# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
+# Occasionally (as on, for example, certain HP terminals) this has the HTJ
+# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
+# CHT abbreviation.
+#
+# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
+#
+# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
+# abbreviation.
+#
+# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
+# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
+# 5 = clear all char tabs, 6 = clear all line tabs.
+#
+# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
+# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
+# Position Absolute" but retains the HVP abbreviation.
+#
+# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
+# abbreviation.
+#
+# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
+# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
+# DSR, 6 = request CPR response.
+#
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
+# 1 = clear from beginning, 2 = clear.
+#
+# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
+#
+# (L) The GSM parameters are vertical and horizontal parameters to scale by.
+#
+# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
+# use CUF for this function and ignore HPR. ECMA-48 calls this "Character
+# Position Relative" but retains the HPR abbreviation.
+#
+# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
+# abbreviation.
+#
+# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
+# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
+# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
+# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
+# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
+# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
+# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
+# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
+# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
+# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
+# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
+# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
+# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
+#
+# (P) SI is also called LSO, Locking Shift Zero.
+#
+# (Q) SI is also called LS1, Locking Shift One.
+#
+# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
+# use CUD for this function and ignore VPR. ECMA calls it `Line Position
+# Absolute' but retains the VPA abbreviation.
+#
+# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
+# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
+# from secondary aux device, 4 = stop relay to primary aux device, 5 =
+# start relay to primary aux device, 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
+#
+# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
+# abbreviation.
+#
+# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
+# abbreviation.
+#
+# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
+#
+# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
+# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
+# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
+# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
+# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
+# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
+# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
+# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
+# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
+# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
+# from ECMA-48's 5th edition but are listed here for reference.
+#
+# (X) Select Alternate Presentation Variants is used only for non-Latin
+# alphabets.
+#
+# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
+#
+# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
+# abbreviation.
+#
+# ---------------------------------------------------------------------------
+#
+# Abbreviations:
+#
+# Intro an Introducer of some kind of defined sequence; the normal 7-bit
+# X3.64 Control Sequence Introducer is the two characters "Escape ["
+#
+# Delim a Delimiter
+#
+# x/y identifies a character by position in the ASCII table (column/row)
+#
+# eF editor function (see explanation)
+#
+# FE format effector (see explanation)
+#
+# F is a Final character in
+# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
+# a control sequence (F from 4/0 to 7/14)
+#
+# Gs is a graphic character appearing in strings (Gs ranges from
+# 2/0 to 7/14) in the ASCII table
+#
+# Ce is a control represented as a single bit combination in the C1 set
+# of controls in an 8-bit character set
+#
+# C0 the familiar set of 7-bit ASCII control characters
+#
+# C1 roughly, the set of control chars available only in 8-bit systems.
+# This is too complicated to explain fully here, so read Jim Fleming's
+# article in the February 1983 BYTE, especially pages 214 through 224.
+#
+# Fe is a Final character of a 2-character Escape sequence that has an
+# equivalent representation in an 8-bit environment as a Ce-type
+# (Fe ranges from 4/0 to 5/15)
+#
+# Fs is a Final character of a 2-character Escape sequence that is
+# standardized internationally with identical representation in 7-bit
+# and 8-bit environments and is independent of the currently
+# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
+#
+# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
+# ASCII table
+#
+# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
+# table
+#
+# Pn is a numeric parameter in a control sequence, a string of zero or
+# more characters ranging from 3/0 to 3/9 in the ASCII table
+#
+# Ps is a variable number of selective parameters in a control sequence
+# with each selective parameter separated from the other by the code
+# 3/11 (which usually represents a semicolon); Ps ranges from
+# 3/0 to 3/9 and includes 3/11
+#
+# * Not relevant to terminal control, listed for completeness only.
+#
+# Format Effectors versus Editor Functions
+#
+# A format effector specifies how following output is to be displayed.
+# An editor function allows you to modify the display. Informally
+# format effectors may be destructive; format effectors should not be.
+#
+# For instance, a format effector that moves the "active position" (the
+# cursor or equivalent) one space to the left would be useful when you want to
+# create an overstrike, a compound character made of two standard characters
+# overlaid. Control-H, the Backspace character, is actually supposed to be a
+# format effector, so you can do this. But many systems use it in a
+# nonstandard fashion, as an editor function, deleting the character to the
+# left of the cursor and moving the cursor left. When Control-H is assumed to
+# be an editor function, you cannot predict whether its use will create an
+# overstrike unless you also know whether the output device is in an "insert
+# mode" or an "overwrite mode". When Control-H is used as a format effector,
+# its effect can always be predicted. The familiar characters carriage
+# return, linefeed, formfeed, etc., are defined as format effectors.
+#
+# NOTES ON THE DEC VT100 IMPLEMENTATION
+#
+# Control sequences implemented in the VT100 are as follows:
+#
+# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
+# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
+#
+# plus several private DEC commands.
+#
+# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
+#
+# Erase from cursor to end of line Esc [ 0 K or Esc [ K
+# Erase from beginning of line to cursor Esc [ 1 K
+# Erase line containing cursor Esc [ 2 K
+# Erase from cursor to end of screen Esc [ 0 J or Esc [ J
+# Erase from beginning of screen to cursor Esc [ 1 J
+# Erase entire screen Esc [ 2 J
+#
+# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
+# Esc [ 2 J, but this is wrong; the default is 0.
+#
+# The VT100 responds to receiving the DA (Device Attributes) control
+#
+# Esc [ c (or Esc [ 0 c)
+#
+# by transmitting the sequence
+#
+# Esc [ ? l ; Ps c
+#
+# where Ps is a character that describes installed options.
+#
+# The VT100's cursor location can be read with the DSR (Device Status
+# Report) control
+#
+# Esc [ 6 n
+#
+# The VT100 reports by transmitting the CPR sequence
+#
+# Esc [ Pl ; Pc R
+#
+# where Pl is the line number and Pc is the column number (in decimal).
+#
+# The specification for the DEC VT100 is document EK-VT100-UG-003.
+
+#### ANSI.SYS
+#
+# Here is a description of the color and attribute controls supported in the
+# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
+# terminal emulators for Intel boxes obey these. They are a proper subset
+# of the ECMA-48 escapes.
+#
+# 0 all attributes off
+# 1 foreground bright
+# 4 underscore on
+# 5 blink on/background bright (not reliable with brown)
+# 7 reverse-video
+# 8 set blank (non-display)
+# 10 set primary font
+# 11 set first alternate font (on PCs, display ROM characters 1-31)
+# 12 set second alternate font (on PCs, display IBM high-half chars)
+#
+# Color attribute sets
+# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
+# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
+# Bright black becomes gray. Bright brown becomes yellow,
+# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
+#
+# * If the 5 attribute is on and you set a background color (40-47) it is
+# supposed to enable bright background.
+#
+# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
+# when you try to set a "bright brown" (yellow) background with attribute
+# 5 (you get a blinking yellow foreground instead). A few displays
+# (including the System V console) support an attribute 6 that undoes this
+# braindamage (this is required by iBCS2).
+#
+# * Some older versions of ANSI.SYS have a bug that causes thems to require
+# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
+# compatible.)
+
+#### Intel Binary Compatibility Standard
+#
+# For comparison, here are the capabilities implied by the Intel Binary
+# Compatibility Standard for UNIX systems (Intel order number 468366-001).
+# These recommendations are optional. IBCS2 allows the leading escape to
+# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
+# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
+# (as described in figure 9-3 of the standard). Those expressed in the ibcs2
+# terminfo entry are followed with the corresponding capability in parens:
+#
+# CSI <n>k disable (n=0) or enable (n=1) keyclick
+# CSI 2h lock keyboard
+# CSI 2i send screen as input
+# CSI 2l unlock keyboard
+# CSI 6m enable background color intensity
+# CSI <0-2>c reserved
+# CSI <0-59>m select graphic rendition
+# CSI <n>;<m>H (cup) cursor to line n and column m
+# CSI <n>;<m>f cursor to line n and column m
+# CSI <n>@ (ich) insert characters
+# CSI <n>A (cuu) cursor up n lines
+# CSI <n>B (cud) cursor down n lines
+# CSI <n>C (cuu) cursor right n characters
+# CSI <n>D (cud) cursor left n characters
+# CSI <n>E cursor down n lines and in first column
+# CSI <n>F cursor up n lines and in first column
+# CSI <n>G (hpa) position cursor at column n-1
+# CSI <n>J (ed) erase in display
+# CSI <n>K (el) erase in line
+# CSI <n>L (il) insert line(s)
+# CSI <n>P (dch) delete characters
+# CSI <n>S (indn) scroll up n lines
+# CSI <n>T (rin) scroll down n lines
+# CSI <n>X (ech) erase characters
+# CSI <n>Z (cbt) back up n tab stops
+# CSI <n>` cursor to column n on line
+# CSI <n>a (cuu) cursor right n characters
+# CSI <n>d (vpa) cursor to line n
+# CSI <n>e cursor down n lines and in first column
+# CSI <n>g (cbt) clear all tabs
+# CSI <n>z make virtual terminal n active
+# CSI ?7h (smam) turn automargin on
+# CSI ?7l (rmam) turn automargin off
+# CSI s save cursor position
+# CSI u restore cursor position to saved value
+# CSI =<c>A set overscan color
+# CSI =<c>F set normal foreground color
+# CSI =<c>G set normal background color
+# CSI =<c>H set reverse foreground color
+# CSI =<c>I set reverse foreground color
+# CSI =<c>J set graphic foreground color
+# CSI =<c>K set graphic foreground color
+# CSI =<n>g (dispc) display n from alternate graphics character set
+# CSI =<p>;<d>B set bell parameters
+# CSI =<s>;<e>C set cursor parameters
+# CSI =<x>D enable/disable intensity of background color
+# CSI =<x>E set/clear blink vs. bold background
+# CSI 7 (sc) (sc) save cursor position
+# CSI 8 (rc) (rc) restore cursor position to saved value
+# CSI H (hts) (hts) set tab stop
+# CSI Q<n><string> define function key string
+# (string must begin and end with delimiter char)
+# CSI c (clear) clear screen
+#
+# The lack of any specification for attributes in SGR (among other things)
+# makes this a wretchedly weak standard. The table above is literally
+# everything iBSC2 has to say about terminal escape sequences; there is
+# no further discussion of their meaning or how to set the parameters
+# in these sequences at all.
+#
+
+######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
+#
+# The historical termcap file entries were written primarily in 4.4BSD termcap.
+# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
+# with the extension names chosen for compatibility with the termcap names
+# assigned in System V terminfo. There are some variant extension sets out
+# there. We try to describe them here.
+#
+# XENIX extensions:
+#
+# The XENIX extensions include a set of function-key capabilities as follows:
+#
+# code XENIX variable name terminfo name name clashes?
+# ---- ------------------- ------------- -----------------------
+# CL key_char_left
+# CR key_char_right
+# CW key_change_window create_window
+# EN key_end kend
+# HM key_home khome
+# HP ??
+# LD key_delete_line kdl1
+# LF key_linefeed label_off
+# NU key_next_unlocked_cell
+# PD key_page_down knp
+# PL ??
+# PN start_print mc5
+# PR ??
+# PS stop_print mc4
+# PU key_page_up kpp pulse
+# RC key_recalc remove_clock
+# RF key_toggle_ref req_for_input
+# RT key_return kent
+# UP key_up_arrow kcuu1 parm_up_cursor
+# WL key_word_left
+# WR key_word_right
+#
+# The XENIX extensions also include the following character-set and highlight
+# capabilities:
+#
+# XENIX terminfo function
+# ----- -------- ------------------------------
+# GS smacs start alternate character set
+# GE rmacs end alternate character set
+# GG :as:/:ae: glitch (analogous to :sg:/:ug:)
+# bo blink begin blink (not used in /etc/termcap)
+# be end blink (not used in /etc/termcap)
+# bb blink glitch (not used in /etc/termcap)
+# it dim begin dim (not used in /etc/termcap)
+# ie end dim (not used in /etc/termcap)
+# ig dim glitch (not used in /etc/termcap)
+#
+# Finally, XENIX also used the following forms-drawing capabilities:
+#
+# single double type ASCII approximation
+# ------ ------ ------------- -------------------
+# GV Gv vertical line |
+# GH Gv horizontal line - _
+# G1 G5 top right corner _ |
+# G2 G6 top left corner |
+# G3 G7 bottom left corner |_
+# G4 G8 bottom right corner _|
+# GD Gd down-tick character T
+# GL Gl left-tick character -|
+# GR Gr right-tick character |-
+# GC Gc middle intersection -|-
+# GU Gu up-tick character _|_
+#
+# These were invented to take advantage of the IBM PC ROM character set. One
+# can compose an acsc string from the single-width characters as follows
+# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
+# When translating a termcap file, ncurses tic will do this automatically.
+# The double forms characters don't fit the SVr4 terminfo model.
+#
+# AT&T Extensions:
+#
+# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
+# nonstandard capabilities. Its signature is the KM capability, used to name
+# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
+# set. Comments in the original, and a little cross-checking with other AT&T
+# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
+# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
+# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
+# cursor invisible), and CV=:ve: (make cursor normal).
+#
+# HP Extensions
+#
+# The HP library (as of mid-1995, their term.h file version 70.1) appears to
+# have the System V capabilities up to SVr1 level. After that, it supports
+# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
+# :mu: capabilities. After that, it supports caps plab_norm, label_on,
+# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
+# HP binary format incompatible with SVr4's.
+#
+# IBM Extensions
+#
+# There is a set of nonstandard terminfos used by IBM's AIX operating system.
+# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
+# capabilities following prtr_non with the following special capabilties:
+# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
+# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
+# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
+# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
+# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
+# renamed (to kcbt and kslt). The places in the box[12] capabilities
+# correspond to acsc chars, here is the mapping:
+#
+# box1[0] = ACS_ULCORNER
+# box1[1] = ACS_HLINE
+# box1[2] = ACS_URCORNER
+# box1[3] = ACS_VLINE
+# box1[4] = ACS_LRCORNER
+# box1[5] = ACS_LLCORNER
+# box1[6] = ACS_TTEE
+# box1[7] = ACS_RTEE
+# box1[8] = ACS_BTEE
+# box1[9] = ACS_LTEE
+# box1[10] = ACS_PLUS
+#
+# The box2 characters are the double-line versions of these forms graphics.
+# The AIX binary terminfo format is incompatible with SVr4's.
+#
+# Iris console extensions:
+#
+# HS is half-intensity start; HE is half-intensity end
+# CT is color terminal type (for Curses & rogue)
+# CP is color change escape sequence
+# CZ are color names (for Curses & rogue)
+#
+# The ncurses tic utility recognizes HS as an alias for mh <dim>.
+#
+# TC Extensions:
+#
+# There is a set of extended termcaps associated with something
+# called the "Terminal Control" or TC package created by MainStream Systems,
+# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
+# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
+# that flags color terminals.
+#
+######## CHANGE HISTORY
+#
+# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
+# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
+# project.
+#
+# This file contains all the capability information present in John Kunze's
+# last version of the termcap master file, except as noted in the change
+# comments at end of file. Some information about very ancient obsolete
+# capabilities has been moved to comments. Some all-numeric names of older
+# terminals have been retired.
+#
+# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
+# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
+# used by BSD curses.
+#
+# The 9.1.0 version of this file was translated from my lightly-edited copy of
+# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
+# the purpose. Unless the ncurses tic implementation and the Lisp code were
+# making perfectly synchronized mistakes which I then failed to catch by
+# eyeball, the translation was correct and perfectly information-preserving.
+#
+# Major version number bumps correspond to major version changes in ncurses.
+#
+# Here is a log of the changes since then:
+#
+# 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
+# * First terminfo master translated from 8.3.
+# 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
+# * Replaced Wyse entries with updated entries supplied by vendor.
+#
+# 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
+# * Added contact & status info from G. Clark Brown <[email protected]>.
+# 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
+# * Better XENIX keycap translation. Describe TC termcaps.
+# * Contact and history info supplied by Qume.
+# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
+# * Raided the Shuford FTP site for recent termcaps/terminfos.
+# * Added information on X3.64 and VT100 standard escape sequences.
+# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
+# * Added a correct X11R6 xterm entry.
+# * Fixed terminfo translations of padding.
+# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
+# * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
+# * Added u6/u7/u8/u9 capabilities.
+# * Added PCVT entry.
+# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
+# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
+# to use reverse-video standout so Emacs will look right.
+# * Added el1 capability to ansi.
+# * Added smacs/rmacs to ansi.sys.
+#
+# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
+# * New mt70 entry.
+# * Added COPYRIGHTS AND OTHER DELUSIONS.
+# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
+# smartvid & smarterm, ampex 175 & 219 & 232,
+# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
+# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
+# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
+# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
+# * Replaced the Perkin-Elmer entries with vendor's official ones.
+# * Restored the old minimal-ansi entry, luna needs it.
+# * Fixed some incorrect ip and proportional-padding translations.
+# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
+# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
+# * Make the xterm entry 65 lines again; create xterm25 and xterm24
+# to force a particular height.
+# * Added beehive4 and reorganized other Harris entries.
+# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
+# * Merged in DEC's official entries for its terminals. The only old
+# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
+# * Replaced the translated BBN Bitgraph entries with purpose-built
+# ones from AT&T's SVr3.
+# * Replaced the AT&T entries with AT&T's official terminfos.
+# * Added teleray 16, vc415, cops10.
+# * Merged in many individual capabilities from SCO terminfo files.
+# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
+# * Typo fixes.
+# * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
+# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
+# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
+# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
+# simterm, citoh and variants.
+# * Replaced sol entry with sol1 and sol2.
+# * Replaced Qume QVT and Freedom-series entries with purpose-built
+# terminfo entries.
+# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
+# and dg200 entries using caps from from SCO.
+# * Added the usual set of function-key mappings to ANSI entry.
+# * Corrected xterm's function-key capabilities.
+# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
+# * Fix in xterm entry, cub and cud are not reliable under X11R6.
+# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
+# * Fix in xterm entry, get the arrow keys right.
+# * Change some \0 escapes to \200.
+# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
+# * Added apple (Videx card), adm1a, oadm31.
+# * Fixed malformed ampex csr.
+# * Fixed act4, cyb110; they had old-style prefix padding left in.
+# * Changed mandatory to advisory padding in many entries.
+# * Replaced HP entries up to hpsub with purpose-built ones.
+# * Blank rmir/smir/rmdc/smdc capabilities removed.
+# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
+# 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
+# * Replaced the Ann Arbor entries with SCO's, the init strings are
+# more efficient (but the entries otherwise identical).
+# * Added dg211 from Shuford archive.
+# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
+# adm42-nl, pc52, gs6300, xerox820, uts30.
+# * Pull SCO's padding into vi200 entry.
+# * Improved capabilities for tvi4107 and other Televideo and Viewpoint
+# entries merged in from SCO's descriptions.
+# * Fixed old-style prefix padding on zen50, h1500.
+# * Moved old superbee entry to superbee-xsb, pulled in new superbee
+# entry from SCO's description.
+# * Reorganized the special entries.
+# * Added lm#0 to cbunix and virtual entries.
+#
+# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
+# * Restored cdc456tst.
+# * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
+# * Added megatek, beacon, microkit.
+# * Freeze for ncurses-1.9 release.
+# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
+# * Added historical data for TAB.
+# * Comment fixes from David MacKenzie.
+# * Added the new BSDI pc3 entry.
+# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
+# * A change in the tic -C logic now ensures that all entries in
+# the termcap translation will fit in < 1024 bytes.
+# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
+# from GNU termcap file. This merges in all their local information.
+# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
+# * Changed tic -C logic to dump all capabilities used by GNU termcap.
+# * Added warnings about entries with long translations (restoring
+# all the GNU termcaps pushes a few over the edge).
+# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
+# * Yet another tic change, and a couple of entry tweaks, to reduce the
+# number of long (> 1024) termcap translations back to 0.
+#
+# 9.6.0 (Mon May 1 10:35:54 EDT 1995)
+# * Added kf13-kf20 to Linux entry.
+# * Regularize Prime terminal names.
+# * Historical data on Synertek.
+# * Freeze for ncurses-1.9.1.
+# 9.6.1 (Sat May 6 02:00:52 EDT 1995):
+# * Added true xterm-color entry, renamed djm's pseudo-color entry.
+# * Eliminate whitespace in short name fields, this tanks some scripts.
+# * Name field changes to shorten some long entries.
+# * Termcap translation now automatically generates empty rmir/smir
+# when ich1/ich is present (copes with an ancient vi bug).
+# * Added `screen' entries from FSF's screen-3.6.2.
+# * Added linux-nic and xterm-nic entries.
+# 9.6.2 (Sat May 6 17:00:55 EDT 1995):
+# * Change linux entry to use smacs=\E[11m and have an explicit acsc,
+# eliminating some special-case code in ncurses.
+#
+# 9.7.0 (Tue May 9 18:03:12 EDT 1995):
+# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
+# that captures everything unique from it.
+# * Added reorder script generator.
+# * Freeze for ncurses 1.9.2 release.
+# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
+# * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
+# * Added Olaf Siebert's corrections for adm12.
+# * ansi-pc-color now includes the colors and pairs caps, so that
+# entries which use it will inherit them automatically.
+# * The linux entry can now recognize the center (keypad 5) key.
+# * Removed some junk that found its way into Linux acsc.
+#
+# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
+# * Add 50% cut mark as a desperate hack to reduce tic's core usage.
+# * xterm doesn't try to use application keypad mode any more.
+# * Freeze for ncurses-1.9.3 release.
+# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
+# * Added corrected sun entry from vendor.
+# * Added csr capability to linux entry.
+# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
+# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
+# * Some commented-out caps in long entries come back in, my code
+# for computing string-table lengths had a bug in it.
+# * pcansi series modified to fit comm-program reality better.
+# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
+# * BSD/OS actually ships the ibmpc3 bold entry as its console.
+# * Correct some bad aliases in the pcansi series
+# * Added entry for QNX console.
+# * Clean up duplicate long names for use with 4.4 library.
+# * Change vt100 standout to be normal reverse vide, not bright reverse;
+# this makes the Emacs status line look better.
+# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
+# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
+# * Minor surgery, mostly on name strings, to shorten termcap version.
+#
+# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
+# * Added dec-vt100 for use with the EWAN emulator.
+# * Added kmous to xterm for use with xterm's mouse-tracking facility.
+# * Freeze for 1.9.5 alpha release.
+# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
+# * Changed xterm lines to 24, the X11R6 default.
+# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
+# * Added 7 newly discovered, undocumented acsc characters to linux
+# entry (the pryz{|} characters).
+# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
+# * Correct two typos in the xterm entries introduced in 9.9.1.
+# * I finally figured out how to translate ko capabilities. Done.
+# * Added tvi921 entries from Tim Theisen.
+# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
+# * Removed mystery tec entry, it was neither interesting nor useful.
+# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
+# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
+# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
+# by making them relative to use capabilities
+# * Added cuf1=^L to tvi925 from deleted variant tvi925a.
+# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
+# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
+# ampex80,
+# * Translate all home=\E[;H capabilities to home=\E[H, they're
+# equivalent.
+# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
+# vt100 and ANSI-like terminals.
+# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
+# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
+# does this now, too.
+# * fviewpoint is gone, it duplicated screwpoint.
+# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
+# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
+# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
+# The UW vi50 replaces the old one, which becomes vi50adm,
+# * No more embedded commas in name fields.
+#
+# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
+# * XENIX forms characters in fos, trs16, scoansi become acsc strings,
+# * Introduced klone+* entries for describing Intel-console behavior.
+# * Linux kbs is default-mapped to delete for some brain-dead reason.
+# * -nsl -> -ns. The -pp syntax is obsolete.
+# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
+# * Make xterm entry do application-keypad mode again. I got complaints
+# that it was messing up someone's 3270 emulator.
+# * Added some longname fields in order to avoid warning messages from
+# older tic implementations.
+# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
+# it! (This gives us pi, greater than, less than, and a few more.)
+# * Freeze for ncurses-1.9.6 release.
+# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
+# * Add xon to a number of console entries, they're memory-mapped and
+# don't need padding.
+# * Correct the use dependencies in the ansi series.
+# * Hand-translate more XENIX capabilities.
+# * Added hpterm entry for HP's X terminal emulator.
+# * Added aixterm entries.
+# * Shortened four names so everything fits in 14 chars.
+#
+# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
+# * Added ibcs2 entry and info on iBCS2 standard.
+# * Corrected hpa/vpa in linux entry. They still fail the worm test.
+# * We can handle the HP meml/memu capability now.
+# * Added smacs to klone entries, just as documentation.
+# * Carrected ansi.sys and cit-500 entries.
+# * Added z39, vt320-k311, v220c, and avatar entries.
+# * Make pcansi use the ansi.sys invis capability.
+# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
+# tvi925, tvi950, dt80, ncr7900i, h19.
+# * X3.64 has been withdrawn, change some references.
+# * Removed function keys from ansi-m entry.
+# * Corrected ansi.sys entry.
+# * Freeze for ncurses-1.9.7 release.
+# 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
+# * Added rmam/smam capabilities to many entries based on init strings.
+# * Added correct hpa/vpa to linux.
+# * Reduced several entries relative to vt52.
+# 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
+# * Exiled some utterly unidentifiable custom and homebrew types to the
+# UFO file; also, obsolete small-screen hardware; also, entries which
+# look flat-out incorrect, garbled, or redundant. These include the
+# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
+# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
+# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
+# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
+# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
+# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
+# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
+# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
+# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
+# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
+# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
+# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
+# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
+# * Corrected pcvt25h as suggested by Brian C. Grayson
+# <[email protected]>.
+# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
+# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
+# * Added kent=\EOM to xterm entry.
+#
+# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
+# * Corrected gigi entry.
+# * Restored cuf/cud1 to xterm, their apparent bugginess was due to
+# bad hpa/vpa capabilities.
+# * Corrected flash strings to have a uniform delay of .2 sec. No
+# more speed-dependent NUL-padding!
+# * terminfo capabilities in comments bracketed with <>.
+# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
+# * Replaced pcvt with the 3.31 pcvt entries.
+# * Freeze for 1.9.7a.
+# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
+# * Added emu entry from the X11R6 contrib tape sources.
+#
+# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
+# * Improved iris-ansi and sun entries.
+# * More flash string improvements.
+# * Corrected wy160 & wy160 as suggested by Robert Dunn
+# * Added dim to at386.
+# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
+# he's ready to start using the termcap generated from this one.
+# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
+# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
+# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
+# att610, att620, att630,
+# * Changed hazeltine name prefix from h to hz.
+# * Sent t500 to the UFI file.
+# * I think we've sucked all the juice out of BSDI's termcap file now.
+# * Freeze for ncurses 1.9.8 release
+# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
+# * Unfreeze, linux kbs needed to be fixed.
+# * Tim Theisen pinned down a bug in the DMD firmware.
+# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
+# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
+# (The broken ones had been shadowed by sgr.)
+# 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
+# * Added documentation on ECMA-48 standard.
+# * New Amiga entry.
+# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
+# * More ECMA-48 stuff
+# * Corrected typo in minix entry, added pc-minix.
+# * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
+# * Added rxvt entry.
+# * Added 1.3.x color-change capabilities to linux entry.
+# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
+# * Corrected rxvt entry khome/kend.
+# * Corrected linux color change capabilities.
+# * NeXT entries from Dave Wetzel.
+# * Cleaned up if and rf file names (all in /usr/share now).
+# * Changed linux op capability to avoid screwing up a background color
+# pair set by setterm.
+# 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
+# * Added xterm-sun.
+# 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
+# * Added visa50.
+#
+# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
+# * Another sweep through the Shuford archive looking for new info.
+# * Added dg100 alias to dg6053 based on a comp.terminals posting.
+# * Added st52 from Per Persson.
+# * Added eterm from the GNU Emacs 19.30 distribution.
+# * Freeze for 1.9.9.
+# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
+# * FreeBSD console entries from Andrew Chernov.
+# * Removed duplicate Atari st52 name.
+# 9.13.2 (Tue May 7 16:10:06 EDT 1996)
+# * xterm doesn't actually have ACS_BLOCK.
+# * Change klone+color setf/setb to simpler forms that can be
+# translated into termcap.
+# * Added xterm1.
+# * Removed mechanically-generated junk capabilities from cons* entries.
+# * Added color support to bsdos.
+# 9.13.3 (Thu May 9 10:35:51 EDT 1996):
+# * Added Wyse 520 entries from Wm. Randolph Franklin <[email protected]>.
+# * Created ecma+color, linux can use it. Also added ech to linux.
+# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
+# * Add descriptions to FreeBSD console entries. Also shorten
+# some aliases to <= 14 chars for portability.
+# * Added x68k console
+# * Added OTbs to several VT-series entries.
+# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
+# * screen entry update for 3.7.1 from Michael Alan Dorman.
+# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
+# * kterm correction due to Kenji Rikitake.
+# * ACS correction in vt320-kll due to Phillippe De Muyter.
+# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
+# * Sun console entry correction from J.T. Conklin.
+# * Changed all DEC VT300 and up terminals to use VT300 tab set
+# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
+# * Added smul to linux entry (we never noticed it was missing
+# because of sgr!).
+# * Added rmln to hp+labels (deduced from other HP entries).
+# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
+# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
+# * Corrected vt220 acsc.
+# * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
+# this corresponds to reality and helps prevent some tic warnings.
+# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
+# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
+# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
+# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
+# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
+# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
+# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
+# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
+# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
+# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
+# ifmr, v3220, wy100q, tandem653, ibmaed.
+# * Added DWK terminal description.
+# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
+# * Many entries now have highlights inherited from adm+sgr.
+# * xterm entry now corresponds to XFree86 3.1.2E, with color.
+# * xtitle and xtitle-twm enable access to the X status line.
+# * Added linux-1.3.6 color palette caps in conventional format.
+# * Added adm1178 terminal.
+# * Move fos and apollo terminals to obsolete category.
+# * Aha! The BRL terminals file told us what the Iris extensions mean.
+# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
+# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
+# cit500, adm11.
+# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
+# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
+# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
+# * Corrected, from BRL termcap file: vi50.
+# * Better rxvt entry & corrected xterm entries from Thomas Dickey.
+# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
+# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
+# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
+# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
+# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
+# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
+# * Paired-attribute fixes to various terminals.
+# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
+# * xterm entry corrections from Thomas Dickey.
+# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
+# * Added t916 entry, translated from a termcap in SCO's support area.
+# * New qnx entry from Michael Hunter.
+# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
+# * Added hpex2 from Ville Sulko.
+# * Fixed a bug that ran the qnx and pcvtXX together.
+# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
+# * Added dtterm entry from Solaris CDE.
+# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
+# * corrected pairs#8 typo in dtterm entry.
+# * added tvi9065.
+# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
+# * updated xterm entry to cover 3.1.2E's new features.
+# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
+# * Added new minix entry
+# * Removed aliases of the form ^[0-9]* for obsolete terminals.
+# * Commented out linux-old, nobody's using pre-1.2 kernels now.
+# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
+# * Added Prism entries and kt7ix.
+# * Caution notes about EWAN and tabset files.
+# * Changed /usr/lib/tabset -> /usr/share/tabset.
+# * Added acsc/rmacs/smacs to vt52.
+# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
+# * Merged in Thomas Dickey's reorganization of the xterm entries;
+# added technical corrections to avoid warning messages.
+# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
+# * Added rmso=\E[27m in Linux entry.
+# * Added koi8-r support for Linux console.
+# * Replace xterm entries with canonical ones from XFree86 3.2.
+# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
+# * Added color_xterm from Jacob Mandelson
+# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
+# * Back off the xterm entry to use r6 as a base.
+# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
+# * Added dec-vt220 at Adrian Garside's request.
+#
+#-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
+#
+# 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
+# * Minor corrections to xterm entries.
+# * Replaced EWAN telnet entry.
+# * Dropped the reorder script generator. It was a fossil.
+# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
+# * Replaced minitel-2 entry.
+# * Added MGR, ansi-nt.
+# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
+# * Thorsten Lockert added termcap `bs' to a lot of types, working from
+# the 4.4BSD Lite2 file.
+#
+# 10.1.1 (Sat May 3 21:41:27 EDT 1997):
+# * Use setaf/setab consistently with SVr4.
+# * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
+# 10.1.2 (Sat May 24 21:10:57 EDT 1997)
+# * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
+# * add xterm-16color, for XFree86 3.3
+# 10.1.3 (Sat May 31 12:21:05 EDT 1997)
+# * correct typo in emu
+# * correct typo in vt102-w (Robert Wuest)
+# * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
+# 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
+# * remove ech capability from rxvt (it does the wrong thing)
+# 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
+# * remove spurious newlines from several entries (hp+color, wy50,
+# wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
+# gs6300)
+# 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
+# * correct rmso capability of wy50-mc
+# 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
+# * add cbt to xterm-xf86-v32
+# * disentangle some entries from 'xterm', preferring xterm-r6 in case
+# 'xterm' is derived from xterm-xf86-v32, which implements ech and
+# other capabilities not in xterm-r6.
+# * remove alternate character set from kterm entry.
+# 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
+# * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
+# 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
+# * add xterm-8bit entry.
+# 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
+# * repair several places where early version of tic replaced \, with \\\,
+# * make acsc entries canonical form (sorted, uniq).
+# * modify acsc entries for linux, linux-koi8
+# * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
+# * add color, mouse support to kterm.
+# 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
+# * correct wy120 smxon/tbc capabilities which were stuck together.
+# 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
+# * add entry for xterm-xf86-v39t
+# 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
+# * add u8,u9 to sun-il description
+# 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
+# * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
+# version.
+# * add hds200 description (Walter Skorski)
+# * add EMX 0.9b descriptions
+# * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
+# * rename xhpterm back to hpterm.
+# 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
+# * change initc in linux-c-nc to use 0..1000 range.
+# 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
+# * remove hpa/vpa from rxvt, which implements them incorrectly.
+# * add sgr0 for rxvt.
+# * remove bogus smacs/rmacs from EMX descriptions.
+# 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
+# * revised entry for att7300
+# 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
+# * use \0 rather than \200.
+# * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
+# 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
+# * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
+# * rename xterm-xf86-v39t to xterm-xf86-v40
+# * remove bold/underline from sun console entries since they're not
+# implemented.
+# 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
+# * add beterm entry (Fred Fish)
+# * add irix-color/xwsh entry.
+# * turn ncv off for linux.
+# 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
+# * set ncv for FreeBSD console (treat colors with reverse specially).
+# * remove sgr string from qnx based on report by Xiaodan Tang
+# 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
+# * remove spurious commas from descriptions
+# * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
+# 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
+# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
+# apparently based on cp-866).
+#
+#-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
+#
+# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
+# * Replaced minitel-2 entry.
+# * Added MGR, ansi-nt.
+# * Minor corrections to xterm entries.
+# * Replaced EWAN telnet entry.
+# * Dropped the reorder script generator. It was a fossil.
+# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
+# * Thorsten Lockert added termcap `bs' to a lot of types, working from
+# the 4.4BSD Lite2 file.
+# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
+# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
+# * Updated iris-ansi; corrected vt102-w.
+# * Switch base xterm entry to 3.3 level.
+# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
+# * Added basic4.
+# * Removed rmir/smir from tv92B.
+#
+# 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
+# * add hds200 description (Walter Skorski)
+# * add beterm entry (Fred Fish)
+# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
+# iris-color entries.
+# * add emx entries.
+# * Replaced unixpc entry with Benjamin Sittler's corrected version.
+# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
+# versions.
+# * remove sgr string from qnx based on report by Xiaodan Tang
+# * Added u8/u9, removed rmul/smul from sun-il.
+# * 4.2 tic displays \0 rather than \200.
+# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
+# apparently based on cp-866).
+# * Merged in Pavel Roskin's acsc for linux-koi8
+# * Corrected some erroneous \\'s to \.
+# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
+# * II -> ii in pcvtXX, screen, xterm.
+# * Removed \n chars following ANSI escapes in sgr & friends.
+# * Updated Wyse entries.
+# * h19 corrections from Tim Pierce.
+# * Noted that the dm2500 has both ich and smir.
+# * added pccons for the Alpha under OSF/1.
+# * Added Sony NEWS workstation entries and cit101e-rv.
+# * Reverted `amiga'; to Kent Polk's version, as I'm told
+# the Verkuil entry messes up with Amiga Telnet.
+# 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
+# * Corrected attributions in 10.2.0 release notes.
+# * Scanned the Shuford archive for new terminfos and information.
+# * Removed sgr from qnx entry (Thomas Dickey).
+# * Added entries for ICL and Kokusai Data Systems terminals.
+# * Incorporated NCR terminfos from the Boundless Technology FTP site.
+# * Incorporated att700 from the Boundless Technology FTP site.
+# * Miscellaneous contact-address and Web-page updates.
+#
+#-(changelog-beginning-ncurses-4.2)---------------------------------------------
+#
+# 1998/5/9
+# * add nxterm and xterm-color terminfo description (request by Cristian
+# Gafton <[email protected]>).
+# * modify rxvt terminfo description to clear alternate screen before
+# switching back to normal screen, for compatibility with applications
+# which use xterm (reported by Manoj Kasichainula <[email protected]>).
+# * modify linux terminfo description to reset color palette (reported
+# by Telford Tendys <[email protected]>).
+#
+# 1998/7/4
+# * merge changes from current XFree86 xterm terminfo descriptions.
+#
+# 1998/7/25
+# * Added minitel1 entries from Alexander Montaron.
+# * Added qnxt2 from Federico Bianchi.
+# * Added arm100 terminfo entries from Dave Millen.
+#
+# 1998/8/6
+# * Added ncsa telnet entries from Francesco Potorti
+#
+# 1998/8/15
+# * modify ncsa telnet entry to reflect color, other capabilities based on
+# examination of the source code - T.Dickey.
+#
+# 1998/8/22
+# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
+#
+# 1998/8/29
+# * Added Francesco Potorti's tuned Wyse 99 entries.
+# * dtterm enacs correction from Alexander V. Lukyanov.
+# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
+# * correct a typo in icl6404 entry.
+# * add xtermm and xtermc
+#
+# 1998/9/26
+# * format most %'char' sequences to %{number}
+# * adapt IBM AIX 3.2.5 terminfo - T.Dickey
+# * merge Data General terminfo from Hasufin <[email protected]> - TD
+#
+# 1998/10/10
+# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
+# * correct initialization string in xterm-r5, add misc other features
+# to correspond with xterm patch 84 - TD
+#
+# 1998/12/19
+# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
+# * add Mathew Vernon's mach console entries
+# * corrections for ncsa function-keys (report by Larry Virden)
+#
+# 1998/12/19
+# * change linux to use ncv#2, since underline does not work with color - TD
+#
+# 1999/1/9
+# * add kbt to iris-ansi, document other shift/control functionkeys - TD
+# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
+# application modes, change kent to use the correct keypad code - TD
+#
+# 1999/1/10
+# * add entry for Tera Term - TD
+#
+# 1999/1/23
+# * minor improvements for teraterm entry - TD
+# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
+# and bsdos-bold to bsdos-pc (Jeffrey C Honig)
+#
+# 1999/2/20
+# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
+# xterm and ncsa entries by removing the unneeded ones. Note that
+# some entries will return kend & khome versus kslt and kfnd, for
+# PC-style keyboards versus strict vt220 compatiblity - TD
+#
+# 1999/3/13
+# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
+# tables - TD
+# * add 'crt' entry - TD
+# * correct typos in 'linux-c' entry - TD
+#
+# 1999/3/14
+# * update entries for BSD/OS console to use klone+sgr and klone+color
+# (Jeffrey C Honig)
+#
+# 1999/3/27
+# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
+#
+# 1999/4/10
+# * add linux-lat, from RedHat patches to ncurses 4.2
+#
+# 1999/4/17
+# * add complete set of default function-key definitions for scoansi - TD.
+#
+# 1999/7/3
+# * add cnorm, cvvis for Linux 2.2 kernels
+#
+# 1999/7/24
+# * add kmous to xterm-r5 -TD
+# * correct entries xterm+sl and xterm+sl-twm, which were missing the
+# parent "use" clause -TD
+#
+# 1999/7/31
+# * corrected cnorm, added el1 in 'screen' description -TD
+#
+# 1999/8/14
+# * add ms-vt100 -TD
+#
+# 1999/8/21
+# * corrections to beterm entry -TD
+#
+# 1999/8/28
+# * add cygwin entry -TD
+#
+# 1999/9/4
+# * minor corrections for beterm entry -TD
+#
+# 1999/9/18
+# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
+#
+# 1999/9/25
+# * add amiga-8bit entry
+# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
+# rcons-color, based on
+# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
+# * add alias for iris-ansi-net
+#
+# 1999/10/2
+# * corrected scoansi entry's acsc, some function keys, add color -TD
+#
+# 1999/10/23
+# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
+# * reorder ncsa entries to make ncsa-vt220 use the alternate function
+# key mapping, leaving Potorti's entries more like he named them -TD
+# * remove enter/exit am-mode from cygwin -TD
+#
+# 1999/10/30
+# * correct typos in several entries (missing '[' from CSI):
+# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
+# strings for avt-ns -TD
+# * add 'dim' to ncv mask for linux (report by Klaus Weide).
+#
+# 1999/11/27
+# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
+# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
+# * add xterm-88color and xterm-256color -TD
+#
+# 1999/12/4
+# * add "obsolete" termcap strings -TD
+# * add kvt and gnome entries -TD
+#
+# 1999/12/11
+# * correct cup string for regent100 -TD
+#
+# 2000/1/1
+# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
+# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
+# * change OTrs capabilities to rs2 -TD
+# * add obsolete and extended capabilities to 'screen' -TD
+#
+# 2000/1/5
+# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
+# with kf10 -TD
+# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
+# and adding kcbt -TD
+#
+# 2000/1/12
+# * remove incorrect khome/kend from xterm-xf86-v333, which was based on
+# nonstandard resource settings -TD
+#
+# 2000/2/26
+# * minor fixes for xterm-*, based on Debian #58530 -TD
+#
+# 2000/3/4
+# * add several terminal types from esr's "11.0", as well as comments.
+# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
+# vt220-8bit, vt220-old, wy85-8bit
+#
+# 2000/3/18
+# * add several terminal types from esr's "11.0.1" (ansi-*).
+# * update OTxx capabilities for changes on 2000/3/4.
+# * revert part of vt220 change (request by Todd C Miller for OpenBSD)
+#
+# 2000/3/26
+# * move screen's AX extension to ecma+color, modify several entries to
+# use that, adjusting ncv as needed -TD
+#
+# 2000/4/8
+# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
+# * correct spelling error in entry name: bq300-rv was given as bg300-rv
+# in esr's version.
+#
+# 2000/4/15
+# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
+# * correct color definition for ibm3164, make minor changes to other
+# IBM terminal definitions based on recent terminfo descriptions -TD
+#
+# 2000/4/22
+# * add mgterm, from NetBSD -TD
+# * add alias sun-cgsix for sun-ss5 as per NetBSD
+# * change cons25w to use rs2 for reset rather than rs1 -TD
+# * add rc/sc to aixterm based on manpage -TD
+#
+# 2000/5/13
+# * remove ncv from xterm-16color, xterm-256color
+#
+# 2000/6/10
+# * add kmous capability to linux to use Joerg Schoen's gpm patch.
+#
+# 2000/7/1
+# * add Eterm (Michael Jennings)
+#
+# 2000-07-18
+# * add amiga-vnc entry.
+#
+# 2000-08-12
+# * correct description of Top Gun Telnet.
+# * add kterm-color
+#
+# 2000-08-26
+# * add qansi* entries from QNX ftp site.
+#
+# 2000-09-16
+# * add Matrix Orbital entries by Eric Z. Ayers).
+# * add xterm-basic, xterm-sco entries, update related entries to XFree86
+# 4.0.1c -TD
+#
+# 2000-09-17
+# * add S0, E0 extensions to screen's entry -TD
+#
+# 2000-09-23
+# * several corrections based on tic's new parameter-checking code -TD
+# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
+# bracketing sequences that reset video attributes (\E8 would restore
+# them) -TD
+#
+# 2000-11-11
+# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
+#
+# 2000-12-16
+# * improved scoansi, based on SCO man-page, and testing console,
+# scoterm with tack -TD
+#
+# 2001-01-27
+# * modify kterm to use acsc via SCS controls.
+#
+# 2001-02-10
+# * screen 3.9.8 allows xterm mouse controls to pass-through
+#
+# 2001-03-11
+# * remove spurious "%|" from some xterm entries.
+#
+# 2001-03-31
+# * modify 'screen' khome/kend to match screen 3.09.08
+# * add examples of 'screen' customization (screen.xterm-xfree86,
+# screen.xterm-r6, screen.teraterm) -TD
+#
+# 2001-04-14
+# * correct definitions of shifted editing keys for xterm-xfree86 -TD
+# * add "Apple_Terminal" entries -Benjamin Sittler
+# * remove time-delays from "Apple_Terminal" entries -TD
+# * make sgr entries time-delays consistent with individual caps -TD
+#
+# 2001-05-05
+# * corrected/updated screen.xterm-xfree86
+#
+# 2001-05-19
+# * ELKS descriptions, from Federico Bianchi
+# * add u6 (CSR) to Eterm (Michael Jennings).
+#
+# 2001-07-21
+# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
+# tic which handles names no longer than 14 characters. Add
+# corresponding descriptions for the Darwin PowerPC console named
+# "xnuppc" -Benjamin Sittler
+#
+# 2001-09-01
+# * change kbs in mach entries to ^? (Marcus Brinkmann).
+#
+# 2001-11-17
+# * add "putty" entry -TD
+# * updated "Apple_Terminal" entries -Benjamin Sittler
+#
+# 2001-11-24
+# * add ms-vt100-color entry -TD
+# * add "konsole" entries -TD
+#
+# 2001-12-08
+# * update gnome entry to Redhat 7.2 -TD
+#
+# 2002-05-25
+# * add kf13-kf48 strings to cons25w -TD
+# * add pcvt25-color entry -TD
+# * changed a few /usr/lib/tabset -> /usr/share/tabset.
+# * improve some features of scoansi entry based on SCO's version -TD
+# * add scoansi-new entry corresponding to OpenServer 5.0.6
+#
+# 2002-06-15
+# * add kcbt to screen entry -TD
+#
+# 2002-06-22
+# * add rxvt-16color, ibm+16color, mvterm entries -TD
+#
+# 2002-09-28
+# * split out linux-basic entry, making linux-c inherit from that, and
+# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
+# the history of this console type -TD
+# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
+# r/g/b parameters of initc are in the range 0 to 1000 -TD
+#
+# 2002-10-05
+# * minor fix for scale-factor of linux-c and linux-c-nc -TD
+#
+# 2002-11-09
+# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
+# in the latter -TD
+#
+# 2002-11-16
+# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
+# * ncr260wy350pp has only 16 color pairs -TD
+# * add sun-type4 from NetBSD -TD
+# * update xterm-xfree86 to current (patch 170) -TD
+# * add screen-bce, screen-s entries -TD
+# * add xterm-1002, xterm-1003 entries -TD
+#
+# 2003-01-11
+# * update homepage for Top Gun Telnet/SSH
+#
+# 2003-01-25
+# * reduce duplication in emx entries, added emx-base -TD
+#
+# 2003-05-24
+# * corrected acs for screen.teraterm -TD
+# * add tkterm entry -TD
+#
+# 2003-07-15
+# * cygwin changes from Charles Wilson:
+# misc/terminfo.src (nxterm|xterm-color): make xterm-color
+# primary instead of nxterm, to match XFree86's xterm.terminfo
+# usage and to prevent circular links.
+# (rxvt): add additional codes from rxvt.org.
+# (rxvt-color): new alias
+# (rxvt-xpm): new alias
+# (rxvt-cygwin): like rxvt, but with special acsc codes.
+# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
+# with a "native" MSWin GUI. Each takes different acsc codes,
+# which are both different from the "normal" rxvt's acsc.
+# (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
+# (cygwinDBG): ditto.
+#
+# 2003-09-27
+# * update gnome terminal entries -TD
+#
+# 2003-10-04
+# * add entries for djgpp 2.03 and 2.04 -TD
+#
+# 2003-10-25
+# * add alias for vtnt -TD
+# * update xterm-xfree86 for XFree86 4.4 -TD
+#
+# 2003-11-22
+# * add linux-vt (Andrey V Lukyanov)
+#
+# 2003-12-20
+# * add screen.linux -TD
+#
+# 2004-01-10
+# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
+#
+# 2004-01-17
+# * add OpenNT/Interix/SFU entries (Federico Bianchi)
+# * add vt100+ and vt-utf8 entries -TD
+# * add uwin entry -TD
+#
+# 2004-03-27
+# * add sgr strings to several common entries lacking them, e.g.,
+# screen, to make the entries more portable -TD
+# * remove cvvis from rxvt entry, since it is the same as cnorm -TD
+# * similar fixups for cvvis/cnorm various entries -TD
+#
+# 2004-05-22
+# * remove 'ncv' from xterm-256color (patch 188) -TD
+#
+# 2004-06-26
+# * add mlterm -TD
+# * add xterm-xf86-v44 -TD
+# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
+# on G1 being used via an ISO-2022 escape sequence (report by
+# Juliusz Chroboczek) -TD
+# * add 'hurd' entry -TD
+#
+# 2004-07-03
+# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
+# xterm-basic -TD
+# * align with xterm #192's use of xterm-new -TD
+# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
+# * make xterm-new the default "xterm" -TD
+#
+# 2004-07-10
+# * minor fixes for emu -TD
+# * add emu-220
+# * add rmam/smam to linux (Trevor Van Bremen)
+# * change wyse acsc strings to use 'i' map rather than 'I' -TD
+# * fixes for avatar0 -TD
+# * fixes for vp3a+ -TD
+#
+# 2004-07-17
+# * add xterm-pc-fkeys -TD
+# * review/update gnome and gnome-rh90 entries (prompted by
+# Redhat Bugzilla #122815) -TD
+# * review/update konsole entries -TD
+# * add sgr, correct sgr0 for kterm and mlterm -TD
+# * correct tsl string in kterm -TD
+#
+# 2004-07-24
+# * make ncsa-m rmacs/smacs consistent with sgr -TD
+# * add sgr, rc/sc and ech to syscons entries -TD
+# * add function-keys to decansi -TD
+# * add sgr to mterm-ansi -TD
+# * add sgr, civis, cnorm to emu -TD
+# * correct/simplify cup in addrinfo -TD
+# * corrections for gnome and konsole entries
+# (Redhat Bugzilla #122815) -Hans de Goede
+# * modify DEC entries (vt220, etc), to add sgr string, and to use
+# ISO-2022 strings for rmacs/smacs -TD
+#
+# 2004-07-31
+# * rename xterm-pc-fkeys to xterm+pcfkeys -TD
+#
+# 2004-08-07
+# * improved putty entry -Robert de Bath
+#
+# 2004-08-14
+# * remove dch/dch1 from rxvt because they are implemented inconsistently
+# with the common usage of bce/ech -TD
+# * remove khome from vt220 (vt220's have no home key) -TD
+# * add rxvt+pcfkeys -TD
+#
+# 2004-08-21
+# * modify several entries to ensure xterm mouse and cursor visibility
+# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
+# Eterm, screen. (The xterm entries are left alone - old ones for
+# compatibility, and the new ones do not require this change) -TD
+#
+# 2004-08-28
+# * add morphos entry -Pavel Fedin
+# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
+# * corrected \E[5?l to \E[?5l in vt320 entries -TD
+#
+# 2004-11-20
+# * update wsvt25 entry -TD
+#
+# 2005-01-29
+# * update pairs for xterm-88color and xterm-256color to reflect the
+# ncurses extended-color support -TD
+#
+# 2005-02-26
+# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
+# * add aixterm-16color to demonstrate 16-color capability -TD
+#
+# 2005-04-23
+# * add media-copy to vt100 -TD
+# * corrected acsc string for vt52 -TD
+#
+# 2005-04-30
+# * add kUP, kDN (user-defined shifted up/down arrow) definitions for
+# xterm-new -TD
+# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
+#
+# 2005-05-07
+# * re-corrected acsc string for vt52 -TD
+#
+# 2005-05-28
+# * corrected sun-il sgr string which referred to bold and underline -TD
+# * add sun-color entry -TD
+#
+# 2005-07-23
+# * modify sgr0 in several entries to reset alternate-charset as in the
+# sgr string -TD
+# * modify sgr string of prism9 to better match the individual
+# attributes -TD
+#
+# 2005-10-15
+# * correct order of use= in rxvt-basic -TD
+#
+# 2005-10-26
+# * use kind/kri as shifted up/down cursor keys for xterm-new -TD
+#
+# 2005-11-12
+# * other minor fixes to cygwin based on tack -TD
+# * correct smacs in cygwin (report by Baurzhan Ismagulov).
+#
+# 2006-02-18
+# * add nsterm-16color entry -TD
+# * remove ncv flag from xterm-16color -TD
+# * remove setf/setb from xterm-256color to match xterm #209 -TD
+# * update mlterm entry to 2.9.2 -TD
+#
+# 2006-02-25
+# * fixes to make nsterm-16color match report
+# by Christian Ebert -Alain Bench
+#
+# 2006-04-22
+# * add xterm+256color building block -TD
+# * add gnome-256color, putty-256color, rxvt-256color -TD
+#
+# 2006-05-06
+# * add hpterm-color -TD
+#
+# 2006-06-24
+# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
+# * add gnome-fc5 (prompted by GenToo #122566) -TD
+# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
+# * improve xterm-256color by combining the ibm+16color setaf/setab
+# strings with SGR 48. The setf/setb strings also are cancelled here
+# rather than omitted so derived entries will cancel those also -Alain
+# Bench
+#
+# 2006-07-01
+# * add some notes regarding copyright to terminfo.src -TD
+# * use rxvt+pcfkeys in Eterm -TD
+# * remove km and flash from gnome, Eterm and rxvt since they do not work
+# as one would expect (km sends ESC rather than setting the 8th bit
+# of the key) -TD
+# * add/use ansi+enq, vt100+enq and vt102+enq -TD
+# * add konsole-solaris -TD
+#
+# 2006-07-22
+# * update xterm-sun and xterm-sco entries to match xterm #216 -TD
+# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
+# * modify xterm-24 to inherit from "xterm" -TD
+# * add xiterm entry -TD
+# * add putty-vt100 entry -TD
+# * corrected spelling of Michael A Dorman's name, prompted by
+# http://www.advogato.org/person/mdorman/diary.html -TD
+#
+# 2006-08-05
+# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
+# * update xterm+pcfkeys to match xterm #216 -TD
+#
+# 2006-08-17
+# * make descriptions of xterm entries consistent with its terminfo -TD
+#
+# 2006-08-26
+# * add xfce, mgt -TD
+#
+# 2006-09-02
+# * correct acsc string in kterm -TD
+#
+# 2006-09-09
+# * add kon entry -TD
+# * remove invis from linux and related entries, add klone+sgr8 for those
+# that implement the feature (or have not been shown to lack it) -TD
+#
+# 2006-09-23
+# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
+# * minor improvements to rxvt+pcfkeys -TD
+#
+# 2006-09-30
+# * fix a few typos in if/then/else expressions -TD
+#
+# 2006-10-07
+# * add several GNU Screen variations with 16- and 256-colors, and
+# status line (Alain Bench).
+#
+# 2007-03-03
+# * add Newbury Data entries (Jean-Charles Billaud).
+#
+# 2007-06-10
+# * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
+#
+# 2007-07-14
+# * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
+# * add konsole-256color entry -TD
+#
+# 2007-08-18
+# * add 9term entry (request by Juhapekka Tolvanen) -TD
+#
+# 2007-10-13
+# * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
+# * add shift-control- and control-modified keys for rxvt editing
+# keypad -TD
+# * update mlterm entry to 2.9.3 -TD
+# * add mlterm+pcfkeys -TD
+#
+# 2007-10-20
+# * move kLFT, kRIT, kind and kri capabilities from xterm-new to
+# xterm+pcc0, etc., to make the corresponding building blocks reflect
+# xterm's capabilities -TD
+# * add mrxvt entry -TD
+# * add xterm+r6f2, use in mlterm and mrxvt entries -TD
+#
+# 2007-11-03
+# * correct acsc strings for h19 and z100 (Benjamin Sittler)
+#
+# 2007-11-11
+# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
+# xterm starting with patch #216 -TD
+# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
+# to match xterm #230 -TD
+# * extend xterm+pccX entries to match xterm #230 -TD
+# * add xterm+app, xterm+noapp, from xterm #230 -TD
+# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
+#
+# 2008-04-19
+# * add screen.rxvt -TD
+#
+# 2008-04-28
+# * add screen+fkeys (prompted by Debian #478094) -TD
+#
+# 2008-06-28
+# * add screen.mlterm -TD
+# * improve mlterm and mlterm+pcfkeys -TD
+#
+# 2008-08-23
+# * add Eterm-256color, Eterm-88color -TD
+# * add rxvt-88color -TD
+#
+# 2008-10-12
+# * add teraterm4.59 entry, use that as primary teraterm entry, rename
+# original to teraterm2.3 -TD
+# * update "gnome" to 2.22.3 -TD
+# * update "konsole" to 1.6.6 -TD
+# * add "aterm" -TD
+# * add "linux2.6.26" -TD
+#
+# 2008-11-15
+# * change several \E[2g (clear tab at current column) to \E[3g
+# (clear all tabs) to match definition for tbc capability -TD
+#
+# 2008-11-29
+# * add eterm-color -TD
+#
+# 2009-01-10
+# * add screen.Eterm -TD
+#
+# 2009-03-28
+# * correct typo in pfkey of ansi.sys-old
+# (report by Kalle Olavi Niemitalo)
+# * move function- and cursor-keys from emx-base to ansi.sys, and create
+# a pfkey capability which handles F1-F48 -TD
+#
+# 2009-05-02
+# * add vwmterm entry (Bryan Christ)
+#
+# 2009-09-19
+# * change ncv and op capabilities in sun-color to match Sun's entry for
+# this (report by Laszlo Peter)
+# * improve interix smso by using reverse rather than bold (report by
+# Kristof Zelechovski).
+#
+# 2009-10-03
+# * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
+# * add linux-16color (Benjamin Sittler)
+# * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
+# * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
+# * add ccc and initc capabilities to xterm-16color -TD
+#
+# 2009-10-31
+# * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
+#
+# 2009-12-12
+# * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
+#
+# 2009-12-12
+# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
+# * rename minix to minix-1.7, add minix entry for Minux3 -TD
+#
+# 2009-12-26
+# * add bterm (bogl 0.1.18) -TD
+# * minor fix to rxvt+pcfkeys -TD
+#
+# 2010-02-06
+# * update mrxvt to 0.5.4, add mrxvt-256color -TD
+#
+# 2010-02-13
+# * add several screen-bce.XXX entries -TD
+#
+# 2010-02-23
+# * modify screen-bce.XXX entries to exclude ech, since screen's color
+# model does not clear with color for that feature -TD
+#
+# 2010-03-20
+# * rename atari and st52 to atari-old, st52-old, use newer entries from
+# FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
+#
+# 2010-06-12
+# * add mlterm+256color entry -TD
+#
+# 2010-07-17
+# * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
+# the alternate character set (patch by Nicholas Marriott)
+#
+# 2010-08-28
+# * improve acsc for vt52 (Benjamin Sittler)
+# * modify nsterm entries for consistent sgr/sgr0 -TD
+# * modify xnuppc entries for consistent sgr/sgr0 -TD
+# * add invis to tek4115 sgr -TD
+#
+# 2010-09-11
+# * reformat acsc strings to canonical format -TD
+#
+# 2010-09-25
+# * add "XT" capability to entries for terminals that support both
+# xterm-style mouse- and title-controls, for "screen" which
+# special-cases TERM beginning with "xterm" or "rxvt" -TD
+#
+# 2010-10-02
+# * fill in no-parameter forms of cursor-movement where a parameterized
+# form is available -TD
+# * fill in missing cursor controls where the form of the controls is
+# ANSI -TD
+# * add parameterized cursor-controls to linux-basic (report by Dae) -TD
+#
+# 2010-10-09
+# * correct comparison used for setting 16-colors in linux-16color
+# entry (Novell #644831) -TD
+# * improve linux-16color entry, using "dim" for color-8 which makes it
+# gray rather than black like color-0 -TD
+#
+# 2010-11-20
+# * make "vte" the principal entry defining "gnome", since GNOME terminal
+# is merely one of several terminals whose behavior is provided by this
+# library -TD
+#
+# 2010-11-27
+# * fix typo in rmso for tek4106 -Goran Weinholt
+#
+# 2010-12-11
+# * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
+# * also suppress ncv in konsole-base -TD
+#
+# 2011-02-05
+# * add U8 feature to denote entries for terminal emulators which do not
+# support VT100 SI/SO when processing UTF-8 encoding -TD
+# * add xterm-utf8 as a demo of the U8 feature -TD
+#
+# 2011-02-20
+# * add cons25-debian entry (Brian M Carlson, Debian #607662).
+#
+# 2011-06-11
+# * update minix entry to minix 3.2 (Thomas Cort).
+#
+# 2011-07-09
+# * fix inconsistent tabset path in pcmw (Todd C. Miller).
+# * remove a backslash which continued comment, obscuring altos3
+# definition with OpenBSD toolset (Nicholas Marriott).
+#
+# 2011-07-16
+# * add/use xterm+tmux chunk from xterm #271 -TD
+# * resync xterm-new entry from xterm #271 -TD
+# * add E3 extended capability to linux-basic (Miroslav Lichvar)
+# * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
+# * add SI/SO change to linux2.6 entry (Debian #515609) -TD
+#
+# 2011-07-21
+# * add kich1 to sun (Yuri Pankov)
+# * use bold rather than reverse for smso in sun-color (Yuri Pankov).
+#
+# 2011-08-06
+# * corrected k9 in dg460-ansi, add other features based on manuals -TD
+#
+# 2011-08-20
+# * minor cleanup of X-terminal emulator section -TD
+# * add terminator entry -TD
+# * add simpleterm entry -TD
+#
+######## SHANTIH! SHANTIH! SHANTIH!
+# generated by ncurses 5.9.20110813 tic
+# using options -Ktx
+# from terminfo.src revision 1.399