#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

# Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.

#

include ../../../make-rules/shared-macros.mk

COMPONENT_NAME =	openssl

# When new version of OpenSSL comes in, you must update both COMPONENT_VERSION

# and IPS_COMPONENT_VERSION.

# Version for IPS. It is easier to do it manually than convert the letter to a

# number while taking into account that there might be no letter at all.

COMPONENT_SRC =		$(COMPONENT_NAME)-$(COMPONENT_VERSION)

COMPONENT_ARCHIVE =	$(COMPONENT_SRC).tar.gz

COMPONENT_ARCHIVE_URL =	http://www.openssl.org/source/$(COMPONENT_ARCHIVE)

# Architecture-specific patches

EXTRA_PATCHES.i386 = $(PATCH_DIR)/openssl-1.0.0d-aesni-v4.i386-patch

EXTRA_PATCHES.sparc = $(PATCH_DIR)/openssl-1.0.0d-t4-engine.sparc-patch

EXTRA_PATCHES = $(EXTRA_PATCHES.$(MACH))

include $(WS_TOP)/make-rules/prep.mk

include $(WS_TOP)/make-rules/configure.mk

include $(WS_TOP)/make-rules/ips.mk

include $(WS_TOP)/make-rules/lint-libraries.mk

PATH=$(SPRO_VROOT)/bin:/usr/bin:/usr/gnu/bin:/usr/perl5/bin

# OpenSSL does not use autoconf but its own configure system.

CONFIGURE_SCRIPT = $(SOURCE_DIR)/Configure

# Used in the configure options below.

PKCS11_LIB32 = /usr/lib/libpkcs11.so.1

PKCS11_LIB64 = /usr/lib/64/libpkcs11.so.1

ENGINESDIR_32 = /lib/openssl/engines

ENGINESDIR_64 = /lib/openssl/engines/64

CONFIGURE_OPTIONS =  -DSOLARIS_OPENSSL -DNO_WINDOWS_BRAINDEATH

CONFIGURE_OPTIONS += --openssldir=/etc/openssl

CONFIGURE_OPTIONS += --prefix=/usr

# We use OpenSSL install code for installing only manual pages and we do that

# for 32-bit version only.

CONFIGURE_OPTIONS += --install_prefix=$(PROTO_DIR)

CONFIGURE_OPTIONS += no-ec

CONFIGURE_OPTIONS += no-ecdh

CONFIGURE_OPTIONS += no-ecdsa

CONFIGURE_OPTIONS += no-rc3

CONFIGURE_OPTIONS += no-rc5

CONFIGURE_OPTIONS += no-mdc2

CONFIGURE_OPTIONS += no-idea

CONFIGURE_OPTIONS += no-hw_4758_cca

CONFIGURE_OPTIONS += no-hw_aep

CONFIGURE_OPTIONS += no-hw_atalla

CONFIGURE_OPTIONS += no-hw_chil

CONFIGURE_OPTIONS += no-hw_gmp

CONFIGURE_OPTIONS += no-hw_ncipher

CONFIGURE_OPTIONS += no-hw_nuron

CONFIGURE_OPTIONS += no-hw_padlock

CONFIGURE_OPTIONS += no-hw_sureware

CONFIGURE_OPTIONS += no-hw_ubsec

CONFIGURE_OPTIONS += no-hw_cswift

CONFIGURE_OPTIONS += threads

CONFIGURE_OPTIONS += shared

# MD2 is not enabled by default in OpensSSL but some software we have in

# Userland needs it. One example is nmap.

CONFIGURE_OPTIONS += enable-md2

CONFIGURE_OPTIONS += no-seed

# We use both no-whirlpool and no-whrlpool since there is an inconsistency in

# the OpenSSL code and one needs both to build OpenSSL successfully with

# Whirlpool implementation removed.

CONFIGURE_OPTIONS += no-whirlpool

CONFIGURE_OPTIONS += no-whrlpool

# We define our own compiler and linker option sets for Solaris. See Configure

# for more information.

CONFIGURE_OPTIONS32_i386 =	solaris-x86-cc-sunw

CONFIGURE_OPTIONS32_sparc =	solaris-sparcv9-cc-sunw

CONFIGURE_OPTIONS64_i386 =	solaris64-x86_64-cc-sunw

CONFIGURE_OPTIONS64_sparc =	solaris64-sparcv9-cc-sunw

# Some additional options needed for our engines.

CONFIGURE_OPTIONS += --pk11-libname=$(PKCS11_LIB$(BITS))

CONFIGURE_OPTIONS += --enginesdir=$(ENGINESDIR_$(BITS))

CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS$(BITS)_$(MACH))

# OpenSSL has its own configure system which must be run from the fully

# populated source code directory. However, the Userland configuration phase is

# run from the build directory. So, we must get the full source code into the

# build directory.

COMPONENT_PRE_CONFIGURE_ACTION = \

    ( $(CLONEY) $(SOURCE_DIR) $(BUILD_DIR)/$(MACH$(BITS)); )

# We deliver only one opensslconf.h file which must be suitable for both 32 and

# 64 bits. Depending on the configuration option, OpenSSL's Configure script

# creates opensslconf.h for either 32 or 64 bits. A patch makes the resulting

# header file usable on both architectures. The patch was generated against the

# opensslconf.h version from the 32 bit build.

COMPONENT_POST_CONFIGURE_ACTION = \

    ( [ $(BITS) -eq 32 ] && $(GPATCH) -p1 $(@D)/crypto/opensslconf.h \

      patches-post-config/opensslconf.patch; cd $(@D); $(MAKE) depend; )

# We do not ship our engines as patches since it would be more difficult to

# update the files which have been under continuous development. We rather copy

# the files to the right directories.

COMPONENT_PRE_BUILD_ACTION = \

    ( $(CP) -fp engines/aesni/eng_aesni.c	$(@D)/crypto/engine; \

      $(CP) -fp engines/aesni/aesni-x86*.pl	$(@D)/crypto/aes/asm; \

      $(CP) -fp engines/devcrypto/*.[ch]	$(@D)/engines; \

      $(CP) -fp engines/pkcs11/*.[ch]		$(@D)/crypto/engine; \

      $(CP) -fp engines/t4/eng_t4*.[ch]		$(@D)/crypto/engine; \

      $(CP) -fp engines/t4/t4_aes.S		$(@D)/crypto/aes/asm; \

      $(CP) -fp engines/t4/t4_md5.S		$(@D)/crypto/md5/asm; \

      $(CP) -fp engines/t4/t4_sha?.S		$(@D)/crypto/sha/asm; )

build:		$(BUILD_32_and_64)

# OpenSSL uses sections man[1357] by default so we must create the man

# directories we use for OpenSSL man pages in Solaris. Note that we patch the

# OpenSSL man page install script to use the correct directories.

MANDIR_SECTIONS =  $(PROTO_DIR)/usr/share/man/man1openssl

MANDIR_SECTIONS += $(PROTO_DIR)/usr/share/man/man3openssl

MANDIR_SECTIONS += $(PROTO_DIR)/usr/share/man/man5openssl

MANDIR_SECTIONS += $(PROTO_DIR)/usr/share/man/man7openssl

# We must create man page directories manually since we patched OpenSSL install

# code to install into manXopenssl instead of manX. Also, OpenSSL does not

# install into <dir>/$(MACH64) for 64-bit install so no such directory is

# created and Userland install code would fail when installing lint libraries.

COMPONENT_PRE_INSTALL_ACTION = ( $(MKDIR) $(MANDIR_SECTIONS); \

    $(MKDIR) $(PROTO_DIR)/usr/lib/$(MACH64); )

# The install_docs target will install man pages into $(PROTO_DIR)/$(MANDIR). We

# also add /usr/perl5/bin to PATH so that OpenSSL install code can locate the

# system pod2man. If not set, OpenSSL make would use an internal implementation

# from the tarball which would corrupt some man pages.

COMPONENT_INSTALL_ARGS += PATH=$(PATH) MANDIR=/usr/share/man

# We could run OpenSSL install code for 32 bits only to process header files and

# manual pages. However, link libraries depend on install stamps so we run

# install for 64 bit as well. Note that we must take built binary files from

# build directories, not from the proto area which contains whatever was

# installed first.

install:	$(INSTALL_32_and_64)

# We need to modify the default lint flags to include patched opensslconf.h from

# the build directory. If we do not do that, lint will complain about md2.h

# which is not enabled by default but it is in our opensslconf.h.

LFLAGS_32 := -I$(BUILD_DIR_32)/include $(LINT_FLAGS)

LFLAGS_64 := -I$(BUILD_DIR_64)/include $(LINT_FLAGS)

# Set modified lint flags for our lint library targets.

$(BUILD_DIR_32)/llib-lcrypto.ln: LINT_FLAGS="$(LFLAGS_32)"

$(BUILD_DIR_32)/llib-lssl.ln: LINT_FLAGS="$(LFLAGS_32)"

$(BUILD_DIR_64)/llib-lcrypto.ln: LINT_FLAGS="$(LFLAGS_64)"

$(BUILD_DIR_64)/llib-lssl.ln: LINT_FLAGS="$(LFLAGS_64)"

test:		$(NO_TESTS)

BUILD_PKG_DEPENDENCIES =	$(BUILD_TOOLS)

include $(WS_TOP)/make-rules/depend.mk