#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.

#

export PARFAIT_BUILD=no

include ../../../make-rules/shared-macros.mk

PATH=$(SPRO_VROOT)/bin:/usr/bin:/usr/gnu/bin:/usr/perl5/bin

ifeq   ($(strip $(PARFAIT_BUILD)),yes)

PATH=$(PARFAIT_TOOLS):$(SPRO_VROOT)/bin:/usr/bin:/usr/gnu/bin:/usr/perl5/bin

endif

COMPONENT_NAME =	openssl-fips-140

# Note that this is the OpenSSL version that is used to build FIPS-140 certified

# libraries. However, we use the FIPS canister version for the IPS package.

IPS_COMPONENT_VERSION = 2.0.6

COMPONENT_PROJECT_URL=	http://www.openssl.org/

COMPONENT_SRC_NAME =	openssl

COMPONENT_SRC =		$(COMPONENT_SRC_NAME)-$(COMPONENT_VERSION)

COMPONENT_ARCHIVE =	$(COMPONENT_SRC).tar.gz

COMPONENT_ARCHIVE_HASH=	\

COMPONENT_ARCHIVE_URL =	$(COMPONENT_PROJECT_URL)source/$(COMPONENT_ARCHIVE)

COMPONENT_BUGDB=	library/openssl

# OpenSSL FIPS directory

OPENSSL_FIPS_DIR = $(COMPONENT_DIR)/../openssl-fips

# Note that the SPARC patch above does not fit this pattern. That is intentional

# and a reason why we can add it to the EXTRA_PATCHES variable so that we use it

# only on SPARC.

PATCH_PATTERN = [0-9][0-9]*.patch

include $(WS_MAKE_RULES)/prep.mk

include $(WS_MAKE_RULES)/configure.mk

include $(WS_MAKE_RULES)/ips.mk

include $(WS_MAKE_RULES)/lint-libraries.mk

# OpenSSL does not use autoconf but its own configure system.

CONFIGURE_SCRIPT = $(SOURCE_DIR)/Configure

# Used in the configure options below.

PKCS11_LIB32 = /usr/lib/libpkcs11.so.1

PKCS11_LIB64 = /usr/lib/64/libpkcs11.so.1

ENGINESDIR_32 = /lib/openssl/engines

ENGINESDIR_64 = /lib/openssl/engines/64

# Built openssl/openssl-fips component is used when building FIPS-140 libraries.

# What we do here follows the OpenSSL FIPS-140 User Guide instructions.

FIPS_BUILD_DIR_32 = $(shell echo $(BUILD_DIR_32) | \

    sed -e 's/openssl-1.0.1-fips-140/openssl-fips/g' )

FIPS_BUILD_DIR_64 = $(shell echo $(BUILD_DIR_64) | \

    sed -e 's/openssl-1.0.1-fips-140/openssl-fips/g' )

CONFIGURE_OPTIONS =  -DSOLARIS_OPENSSL -DNO_WINDOWS_BRAINDEATH

CONFIGURE_OPTIONS += --openssldir=/etc/openssl

CONFIGURE_OPTIONS += --prefix=/usr

# We use OpenSSL install code for installing only manual pages and we do that

# for 32-bit version only.

CONFIGURE_OPTIONS += --install_prefix=$(PROTO_DIR)

CONFIGURE_OPTIONS += no-ec2m

CONFIGURE_OPTIONS += no-rc3

CONFIGURE_OPTIONS += no-rc5

CONFIGURE_OPTIONS += no-mdc2

CONFIGURE_OPTIONS += no-idea

CONFIGURE_OPTIONS += no-hw_4758_cca

CONFIGURE_OPTIONS += no-hw_aep

CONFIGURE_OPTIONS += no-hw_atalla

CONFIGURE_OPTIONS += no-hw_chil

CONFIGURE_OPTIONS += no-hw_gmp

CONFIGURE_OPTIONS += no-hw_ncipher

CONFIGURE_OPTIONS += no-hw_nuron

CONFIGURE_OPTIONS += no-hw_padlock

CONFIGURE_OPTIONS += no-hw_sureware

CONFIGURE_OPTIONS += no-hw_ubsec

CONFIGURE_OPTIONS += no-hw_cswift

CONFIGURE_OPTIONS += threads

CONFIGURE_OPTIONS += shared

CONFIGURE_OPTIONS += fips --with-fipslibdir="$(FIPS_BUILD_DIR_$(BITS))/fips/"

CONFIGURE_OPTIONS += --with-fipsdir="$(BUILD_DIR_$(BITS))"

# MD2 is not enabled by default in OpensSSL but some software we have in

# Userland needs it. One example is nmap.

CONFIGURE_OPTIONS += enable-md2

CONFIGURE_OPTIONS += no-seed

# Disable SSLv2 protocol

CONFIGURE_OPTIONS += no-ssl2

# We define our own compiler and linker option sets for Solaris. See Configure

# for more information.

CONFIGURE_OPTIONS32_i386 =	solaris-x86-cc-sunw

CONFIGURE_OPTIONS32_sparc =	solaris-sparcv8-cc-sunw

CONFIGURE_OPTIONS64_i386 =	solaris64-x86_64-cc-sunw

CONFIGURE_OPTIONS64_sparc =	solaris64-sparcv9-cc-sunw

# Some additional options needed for our engines.

CONFIGURE_OPTIONS += --pk11-libname=$(PKCS11_LIB$(BITS))

CONFIGURE_OPTIONS += --enginesdir=$(ENGINESDIR_$(BITS))

CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS$(BITS)_$(MACH))

# OpenSSL has its own configure system which must be run from the fully

# populated source code directory. However, the Userland configuration phase is

# run from the build directory. The easiest way to workaround it is to copy all

# the source files there.

COMPONENT_PRE_CONFIGURE_ACTION = \

    ( $(CLONEY) $(SOURCE_DIR) $(BUILD_DIR)/$(MACH$(BITS)); )

# We deliver only one opensslconf.h file which must be suitable for both 32 and

# 64 bits. Depending on the configuration option, OpenSSL's Configure script

# creates opensslconf.h for either 32 or 64 bits. A patch makes the resulting

# header file usable on both architectures. The patch was generated against the

# opensslconf.h version from the 32 bit build.

COMPONENT_POST_CONFIGURE_ACTION = \

   ( [ $(BITS) -eq 32 ] && $(GPATCH) -p1 $(@D)/crypto/opensslconf.h \

      patches-post-config/opensslconf.patch; cd $(@D); $(MAKE) depend; )

# We must make sure that openssl-fips component is built before this 1.0.1

# component since in order to build FIPS-140 certified libraries, the canister

# is needed. Note that we must unset BITS that would override the same variable

# used in openssl-fips' Makefile, and we would end up up with both canisters

# built in 64 (or 32) bits.

$(COMPONENT_DIR)/../openssl-fips/build/$(MACH32)/.installed \

$(COMPONENT_DIR)/../openssl-fips/build/$(MACH64)/.installed:

	( unset BITS; \

	$(MAKE) -C $(COMPONENT_DIR)/../openssl-fips install; )

# download, clean, and clobber should all propogate to the fips bits

download clobber clean::

	(cd ../openssl-fips ; $(GMAKE) $@)

# We do not ship our engines as patches since it would be more difficult to

# update the files which have been under continuous development. We rather copy

# the files to the right directories and let OpenSSL makefiles build it.

# We also copy some FIPS specific header files needed to build FIPS version

# of OpenSSL from FIPS module.

COMPONENT_PRE_BUILD_ACTION = \

    ( $(LN) -fs $(COMPONENT_DIR)/engines/pkcs11/*     $(@D)/engines; \

      $(MKDIR) $(@D)/bin; \

      $(LN) -fs $(OPENSSL_FIPS_DIR)/openssl-fips-ecp-$(IPS_COMPONENT_VERSION)/fips/fips.h $(@D)/include/openssl; \

      $(LN) -fs $(OPENSSL_FIPS_DIR)/openssl-fips-ecp-$(IPS_COMPONENT_VERSION)/fips/fipssyms.h $(@D)/include/openssl; \

      $(LN) -fs $(OPENSSL_FIPS_DIR)/openssl-fips-ecp-$(IPS_COMPONENT_VERSION)/fips/rand/fips_rand.h $(@D)/include/openssl; \

      $(LN) -fs $(OPENSSL_FIPS_DIR)/openssl-fips-ecp-$(IPS_COMPONENT_VERSION)/fips/fipsld $(@D)/bin/; \

      $(LN) -fs $(OPENSSL_FIPS_DIR)/build/$(MACH$(BITS))/fips/fips_standalone_sha1 $(@D)/bin/; \

      $(LN) -fs $(COMPONENT_DIR)/build/$(MACH$(BITS))/fips_premain_dso $(@D)/bin/;)

# OpenSSL does not install into <dir>/$(MACH64) for 64-bit install so no such

# directory is created and Userland install code would fail when installing lint

# libraries.

COMPONENT_PRE_INSTALL_ACTION = ( $(MKDIR) $(PROTO_DIR)/usr/lib/$(MACH64); )

$(SOURCE_DIR)/.prep: $(COMPONENT_DIR)/../openssl-fips/build/$(MACH32)/.installed \

		     $(COMPONENT_DIR)/../openssl-fips/build/$(MACH64)/.installed

build:			$(BUILD_32_and_64)

# We follow what we do for install in openssl/openssl-1.0.0 component. Please

# see the comment in Makefile in there for more information.

install:	$(INSTALL_32_and_64)

# We need to modify the default lint flags to include patched opensslconf.h from

# the build directory. If we do not do that, lint will complain about md2.h

# which is not enabled by default but it is in our opensslconf.h.

LFLAGS_32 := -I$(BUILD_DIR_32)/include $(LINT_FLAGS)

LFLAGS_64 := -I$(BUILD_DIR_64)/include $(LINT_FLAGS)

# Set modified lint flags for our lint library targets.

$(BUILD_DIR_32)/llib-lcrypto.ln: LINT_FLAGS=$(LFLAGS_32)

$(BUILD_DIR_32)/llib-lssl.ln: LINT_FLAGS=$(LFLAGS_32)

$(BUILD_DIR_64)/llib-lcrypto.ln: LINT_FLAGS=$(LFLAGS_64)

$(BUILD_DIR_64)/llib-lssl.ln: LINT_FLAGS=$(LFLAGS_64)

# There are also separate STC test suites 'openssl' and 'openssl-engine'

# for regression testing. These internal tests are unit tests only.

COMPONENT_TEST_TARGETS = test

test:		$(TEST_32_and_64)

REQUIRED_PACKAGES += system/library