[DEFAULT]

# Show debugging output in log (sets DEBUG log level output)

# debug = False

# L3 requires that an interface driver be set. Choose the one that best

# matches your plugin.

interface_driver = neutron.agent.solaris.interface.SolarisVNICDriver

# Allow overlapping IP (Must have kernel build with CONFIG_NET_NS=y and

use_namespaces = False

# If use_namespaces is set as False then the agent can only configure one

# router.

# This is done by setting the specific router_id.

# router_id =

# When external_network_bridge is set, each L3 agent can be associated

# with no more than one external network. This value should be set to the UUID

# of that external network. To allow L3 agent support multiple external

# networks, both the external_network_bridge and gateway_external_network_id

# must be left empty.

# gateway_external_network_id =

# Indicates that this L3 agent should also handle routers that do not have

# an external network gateway configured.  This option should be True only

# for a single agent in a Neutron deployment, and may be False for all agents

# if all routers must have an external network gateway

# handle_internal_only_routers = True

# Name of bridge used for external network traffic. This should be set to

# empty value for the linux bridge. when this parameter is set, each L3 agent

# can be associated with no more than one external network.

external_network_bridge =

# TCP Port used by Neutron metadata server

# metadata_port = 9697

# Send this many gratuitous ARPs for HA setup. Set it below or equal to 0

# to disable this feature.

# send_arp_for_ha = 3

# seconds between re-sync routers' data if needed

# periodic_interval = 40

# seconds to start to sync routers' data after

# starting agent

# periodic_fuzzy_delay = 5

# enable_metadata_proxy, which is true by default, can be set to False

# if the Nova metadata server is not available

# router_delete_namespaces, which is false by default, can be set to True if

# namespaces can be deleted cleanly on the host running the L3 agent.

# Do not enable this until you understand the problem with the Linux iproute

# utility mentioned in https://bugs.launchpad.net/neutron/+bug/1052535 and

# you are sure that your version of iproute does not suffer from the problem.

# If True, namespaces will be deleted when a router is destroyed.

# router_delete_namespaces = False

# The working mode for the agent. Allowed values are:

# - legacy: this preserves the existing behavior where the L3 agent is

#   deployed on a centralized networking node to provide L3 services

#   like DNAT, and SNAT. Use this mode if you do not want to adopt DVR.

# - dvr: this mode enables DVR functionality, and must be used for an L3

#   agent that runs on a compute host.

# - dvr_snat: this enables centralized SNAT support in conjunction with

#   DVR. This mode must be used for an L3 agent running on a centralized

#   node (or in single-host deployments, e.g. devstack).

# agent_mode = legacy

# Location to store keepalived and all HA configurations

# ha_confs_path = $state_path/ha_confs

# VRRP authentication type AH/PASS

# ha_vrrp_auth_type = PASS

# VRRP authentication password

# ha_vrrp_auth_password =

# The advertisement interval in seconds

# ha_vrrp_advert_int = 2

# Name of the datalink that connects to an external network. By default it's

# set to net0.

# external_network_datalink = net0

# Allow forwarding of packets between tenant's networks

# allow_forwarding_between_networks = False

# An URI that specifies an EVS controller. It is of the form

# ssh://user@hostname, where user is the username to use to connect

# to EVS controller specified by hostname. By default it's set to

# ssh://evsuser@localhost.

# evs_controller = ssh://evsuser@localhost