#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

# Copyright (c) 2010, 2015, Oracle and/or its affiliates. All rights reserved.

#

#

# Rules and Macros for building opens source software that uses configure /

# GNU auto* tools to configure their build for the system they are on.  This

# uses GNU Make to build the components to take advantage of the viewpath

# support and build multiple version (32/64 bit) from a shared source.

#

# To use these rules, include $(WS_MAKE_RULES)/configure.mk in your Makefile

# and define "build", "install", and "test" targets appropriate to building

# your component.

# Ex:

#

# 	build:		$(SOURCE_DIR)/build/$(MACH32)/.built \

#	 		$(SOURCE_DIR)/build/$(MACH64)/.built

#

#	install:	$(SOURCE_DIR)/build/$(MACH32)/.installed \

#	 		$(SOURCE_DIR)/build/$(MACH64)/.installed

#

#	test:		$(SOURCE_DIR)/build/$(MACH32)/.tested \

#	 		$(SOURCE_DIR)/build/$(MACH64)/.tested

#

# Any additional pre/post configure, build, or install actions can be specified

# in your make file by setting them in on of the following macros:

#	COMPONENT_PRE_CONFIGURE_ACTION, COMPONENT_POST_CONFIGURE_ACTION

#	COMPONENT_PRE_BUILD_ACTION, COMPONENT_POST_BUILD_ACTION

#	COMPONENT_PRE_INSTALL_ACTION, COMPONENT_POST_INSTALL_ACTION

#	COMPONENT_PRE_TEST_ACTION, COMPONENT_POST_TEST_ACTION

#

# If component specific make targets need to be used for build or install, they

# can be specified in

#	COMPONENT_BUILD_TARGETS, COMPONENT_INSTALL_TARGETS

#	COMPONENT_TEST_TARGETS

#

CONFIGURE_PREFIX =	/usr

CONFIGURE_BINDIR.32 =	$(CONFIGURE_PREFIX)/bin

CONFIGURE_BINDIR.64 =	$(CONFIGURE_PREFIX)/bin/$(MACH64)

CONFIGURE_LIBDIR.32 =	$(CONFIGURE_PREFIX)/lib

CONFIGURE_LIBDIR.64 =	$(CONFIGURE_PREFIX)/lib/$(MACH64)

CONFIGURE_SBINDIR.32 =	$(CONFIGURE_PREFIX)/sbin

CONFIGURE_SBINDIR.64 =	$(CONFIGURE_PREFIX)/sbin/$(MACH64)

CONFIGURE_MANDIR =	$(CONFIGURE_PREFIX)/share/man

CONFIGURE_LOCALEDIR =	$(CONFIGURE_PREFIX)/share/locale

# all texinfo documentation seems to go to /usr/share/info no matter what

CONFIGURE_INFODIR =	/usr/share/info

CONFIGURE_INCLUDEDIR =	/usr/include

CONFIGURE_ENV = CONFIG_SHELL="$(CONFIG_SHELL)"

CONFIGURE_DEFAULT_DIRS?=yes

CONFIGURE_ENV += PKG_CONFIG_PATH="$(PKG_CONFIG_PATH)"

CONFIGURE_ENV += CC="$(CC)"

CONFIGURE_ENV += CXX="$(CXX)"

CONFIGURE_OPTIONS += --prefix=$(CONFIGURE_PREFIX)

ifeq ($(CONFIGURE_DEFAULT_DIRS),yes)

CONFIGURE_OPTIONS += --mandir=$(CONFIGURE_MANDIR)

ifeq ($(INITIAL_BITS),64)

CONFIGURE_OPTIONS += --bindir=$(CONFIGURE_BINDIR.32)

CONFIGURE_OPTIONS += --sbindir=$(CONFIGURE_SBINDIR.32)

else

CONFIGURE_OPTIONS += --bindir=$(CONFIGURE_BINDIR.$(BITS))

CONFIGURE_OPTIONS += --sbindir=$(CONFIGURE_SBINDIR.$(BITS))

endif

CONFIGURE_OPTIONS += --libdir=$(CONFIGURE_LIBDIR.$(BITS))

endif

CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(BITS))

CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(MACH))

CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(MACH).$(BITS))

COMPONENT_INSTALL_ARGS +=	DESTDIR=$(PROTO_DIR)

$(BUILD_DIR_32)/.configured:	BITS=32

$(BUILD_DIR_64)/.configured:	BITS=64

CONFIGURE_ENV += $(CONFIGURE_ENV.$(BITS))

ifeq   ($(strip $(PARFAIT_BUILD)),yes)

# parfait creates '*.bc' files which can confuse configure's

# object/exe extension detection. which we really don't need it

# to do anyway, so we'll just tell it what they are.

CONFIGURE_ENV += ac_cv_objext=o

CONFIGURE_ENV += ac_cv_exeext=""

# this is fixed in the clang compiler but we can't use it yet

CONFIGURE_ENV += ac_cv_header_stdbool_h=yes

endif

# This MUST be set in the build environment so that if pkg-config is executed

# during the build process, the correct header files and libraries will be

# picked up.  In the Linux world, a system is generally only 32-bit or 64-bit

# at one time so this isn't an issue that various auto* files account for (they

# don't set PKG_CONFIG_PATH when executing pkg-config even if it was specified

# during ./configure).

COMPONENT_BUILD_ENV += PKG_CONFIG_PATH="$(PKG_CONFIG_PATH)"

# CC_FOR_BUILD is used by autoconf to set the compiler and required flags for

# generating native executables and is typically used for host detection and

# other tests during the autoconf process.  Explicitly specifying the target

# bits ensures that autoconf reliably detects 32-bit and 64-bit builds.

CC_FOR_BUILD ?= "$(CC) $(CC_BITS)"

ifneq  ($(strip $(CC_FOR_BUILD)),)

CONFIGURE_ENV += CC_FOR_BUILD=$(CC_FOR_BUILD)

endif

# Similar idea for CPP as above; there's a common macro found in lib-prefix.m4

# for autoconf that detects a 64-bit host on Solaris by using CPP.  As such, by

# default, we need to explicitly specify the target bits to ensure that

# autoconf reliably detects 32-bit and 64-bit builds.

CONFIGURE_CPPFLAGS ?= $(CC_BITS)

ifneq  ($(strip $(CONFIGURE_CPPFLAGS)),)

CONFIGURE_ENV += CPPFLAGS="$(CONFIGURE_CPPFLAGS) $(CPPFLAGS)"

endif

# temporarily work around some issues

CONFIGURE_ENV += "ac_cv_func_realloc_0_nonnull=yes"

CONFIGURE_ENV += "NM=/usr/gnu/bin/nm"

COMPONENT_BUILD_ENV += "ac_cv_func_realloc_0_nonnull=yes"

# configure the unpacked source for building 32 and 64 bit version

CONFIGURE_SCRIPT ?=	$(SOURCE_DIR)/configure

$(BUILD_DIR)/%/.configured:	$(SOURCE_DIR)/.prep

	($(RM) -rf $(@D) ; $(MKDIR) $(@D))

	$(COMPONENT_PRE_CONFIGURE_ACTION)

	(cd $(@D) ; $(ENV) $(CONFIGURE_ENV) $(CONFIG_SHELL) \

		$(CONFIGURE_SCRIPT) $(CONFIGURE_OPTIONS))

	$(COMPONENT_POST_CONFIGURE_ACTION)

	$(TOUCH) $@

# build the configured source

$(BUILD_DIR)/%/.built:	$(BUILD_DIR)/%/.configured

	$(COMPONENT_PRE_BUILD_ACTION)

	(cd $(@D) ; $(ENV) $(COMPONENT_BUILD_ENV) \

		$(GMAKE) $(COMPONENT_BUILD_ARGS) $(COMPONENT_BUILD_TARGETS))

	$(COMPONENT_POST_BUILD_ACTION)

ifeq   ($(strip $(PARFAIT_BUILD)),yes)

	-$(PARFAIT) $(@D)

endif

	$(TOUCH) $@

# install the built source into a prototype area

$(BUILD_DIR)/%/.installed:	$(BUILD_DIR)/%/.built

	$(COMPONENT_PRE_INSTALL_ACTION)

	(cd $(@D) ; $(ENV) $(COMPONENT_INSTALL_ENV) $(GMAKE) \

			$(COMPONENT_INSTALL_ARGS) $(COMPONENT_INSTALL_TARGETS))

	$(COMPONENT_POST_INSTALL_ACTION)

	$(TOUCH) $@

# test the built source

$(BUILD_DIR)/%/.tested-and-compared:    $(BUILD_DIR)/%/.built

	$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)

	$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)

	$(COMPONENT_PRE_TEST_ACTION)

	-(cd $(COMPONENT_TEST_DIR) ; \

		$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \

		$(COMPONENT_TEST_CMD) \

		$(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS)) \

		&> $(COMPONENT_TEST_OUTPUT)

	$(COMPONENT_POST_TEST_ACTION)

	$(COMPONENT_TEST_CREATE_TRANSFORMS)

	$(COMPONENT_TEST_PERFORM_TRANSFORM)

	$(COMPONENT_TEST_COMPARE)

	$(COMPONENT_TEST_CLEANUP)

	$(TOUCH) $@

$(BUILD_DIR)/%/.tested:    $(BUILD_DIR)/%/.built

	$(COMPONENT_PRE_TEST_ACTION)

	(cd $(COMPONENT_TEST_DIR) ; \

		$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \

		$(COMPONENT_TEST_CMD) \

		$(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS))

	$(COMPONENT_POST_TEST_ACTION)

	$(COMPONENT_TEST_CLEANUP)

	$(TOUCH) $@

# test the installed packages

$(BUILD_DIR)/%/.system-tested-and-compared:    $(SOURCE_DIR)/.prep

	$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)

	$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)

	$(COMPONENT_PRE_SYSTEM_TEST_ACTION)

	-(cd $(COMPONENT_SYSTEM_TEST_DIR) ; \

		$(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \

		$(COMPONENT_SYSTEM_TEST_CMD) \

		$(COMPONENT_SYSTEM_TEST_ARGS) $(COMPONENT_SYSTEM_TEST_TARGETS)) \

		&> $(COMPONENT_TEST_OUTPUT)

	$(COMPONENT_POST_SYSTEM_TEST_ACTION)

	$(COMPONENT_TEST_CREATE_TRANSFORMS)

	$(COMPONENT_TEST_PERFORM_TRANSFORM)

	$(COMPONENT_TEST_COMPARE)

	$(COMPONENT_SYSTEM_TEST_CLEANUP)

	$(TOUCH) $@

$(BUILD_DIR)/%/.system-tested:    $(SOURCE_DIR)/.prep

	$(COMPONENT_PRE_SYSTEM_TEST_ACTION)

	(cd $(COMPONENT_SYSTEM_TEST_DIR) ; \

		$(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \

		$(COMPONENT_SYSTEM_TEST_CMD) \

		$(COMPONENT_SYSTEM_TEST_ARGS) $(COMPONENT_SYSTEM_TEST_TARGETS))

	$(COMPONENT_POST_SYSTEM_TEST_ACTION)

	$(COMPONENT_SYSTEM_TEST_CLEANUP)

	$(TOUCH) $@

ifeq   ($(strip $(PARFAIT_BUILD)),yes)

parfait: build

else

parfait:

	$(MAKE) PARFAIT_BUILD=yes parfait

endif

REQUIRED_PACKAGES += developer/build/autoconf

REQUIRED_PACKAGES += developer/build/automake

REQUIRED_PACKAGES += developer/build/gnu-make

REQUIRED_PACKAGES += developer/build/libtool

REQUIRED_PACKAGES += developer/build/pkg-config

REQUIRED_PACKAGES += developer/macro/gnu-m4

REQUIRED_PACKAGES += file/gnu-coreutils

REQUIRED_PACKAGES += library/libtool/libltdl