#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

#

# Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved.

#

include ../../make-rules/shared-macros.mk

# Samba does not work properly on i386 when built by studio with -xO3+.

ifeq ($(MACH), sparc)

WAFOPT1	= -j64

else

# Both SPRO_VROOT and studio_OPT vars must use the override keyword otherwise

# Userland will ignore it and use its default value.

# To use the older 12.3 compiler instead of the default 12.4 compiler uncomment

# the following line.

#override SPRO_VROOT = $(SPRO_ROOT)/solarisstudio12.3

override studio_OPT = -xO1

endif

# parfait seems to spin on us

export PARFAIT_BUILD=no

COMPONENT_NAME=		samba

COMPONENT_SRC=		$(COMPONENT_NAME)-$(COMPONENT_VERSION)

COMPONENT_PROJECT_URL=	http://www.samba.org/

COMPONENT_ARCHIVE=	$(COMPONENT_SRC).tar.gz

COMPONENT_ARCHIVE_URL=	https://download.samba.org/pub/samba/stable/$(COMPONENT_ARCHIVE)

COMPONENT_BUGDB=	utility/samba

COMPONENT_ANITYA_ID=	4758

include $(WS_MAKE_RULES)/prep.mk

# waf

WAF_PATH	=	PATH=$(BUILD_DIR)/samba/buildtools/bin:$(PROTO_DIR)/usr/bin:$$PATH

# Verbosed waf produces unreadable output if parallelized.

# Uncomment to enable verbose build.

#override WAFOPT1	=	-v -j1

# Set build dirs for Samba + Winbind / Winbind (without Samba).

BUILD_DIR_SMB		= $(BUILD_DIR)/samba

BUILD_DIR_WINB		= $(BUILD_DIR)/winbind

# Depends on S12-only libraries from Desktop to build.

ifeq ($(BUILD_TYPE), evaluation)

PUBLISH_STAMP=

endif

include $(WS_MAKE_RULES)/ips.mk

# directory to search for "include" in samba.p5m

PKG_OPTIONS += -I $(COMPONENT_DIR)

# Set the pkg... path to search files in ./Solaris/ dir (mainly the SMF manifests are there)

PKG_PROTO_DIRS += $(COMPONENT_DIR)

# Oracle HSM is not supported on 12.0 yet but the libsam.so target should rather be commented out than removed

#$(PROTO_DIR)/opt/SUNWsamfs/lib/$(MACH64)/libsam.so: Solaris/libsam.c

#	$(MKDIR) $(@D)

#	$(CC.studio.64) -m64 -G $(studio_PIC) -hlibsam.so Solaris/libsam.c \

#		-I$(COMPONENT_DIR)/Solaris/include \

#		-o $@

# Compiler settings

CFLAGS.studio	+=	$(studio_C99_ENABLE)

LIBS +=		-lrt -lsec -lcrypt -lmd5 -lsocket -lnsl

# More libs needed by smbd (libavahi, libgamin, ...)

LIBS4SMBD =	-lsendfile -lavahi-common -lavahi-core

#CPPFLAGS +=	-DSAMBA_VERSION_VENDOR_SUFFIX=\\\"Placeholder_for_vendor_suffix\\\"

CPPFLAGS +=	$(CPP_LARGEFILES)

CPPFLAGS +=	$(CPP_XPG6MODE)

CPPFLAGS +=	-I/usr/include/openldap

# MIT kerberos uses different enctype defs.

CPPFLAGS += -DCKSUMTYPE_HMAC_SHA1_96_AES_128=CKSUMTYPE_HMAC_SHA1_96_AES128

CPPFLAGS += -DCKSUMTYPE_HMAC_SHA1_96_AES_256=CKSUMTYPE_HMAC_SHA1_96_AES256

# Enable adiheap and adistack security extensions

ADIHEAP_MODE =	$(ADIHEAP_ENABLE)

ADISTACK_MODE =	$(ADISTACK_ENABLE)

LDFLAGS +=	-m$(BITS)

LDFLAGS +=	-R/usr/lib/samba$(MACHLIBDIR)

LDFLAGS +=	-R/usr/lib/samba/private$(MACHLIBDIR)

LDFLAGS +=	$(LIBS)

$(BUILD_DIR_SMB)/.configured:	LDFLAGS +=	$(LIBS4SMBD)

LD_OPTIONS += 	$(LD_B_DIRECT)

# --enable-fhs should not be on

CONFIGURE_OPTIONS =	--exec-prefix=/usr

CONFIGURE_OPTIONS +=	--bindir=/usr/lib/samba/bin

CONFIGURE_OPTIONS +=	--sbindir=/usr/lib/samba/sbin

CONFIGURE_OPTIONS +=	--libdir=/usr/lib/samba$(MACHLIBDIR)

CONFIGURE_OPTIONS +=	--with-privatelibdir=/usr/lib/samba/private$(MACHLIBDIR)

CONFIGURE_OPTIONS +=	--sysconfdir=/etc/samba

CONFIGURE_OPTIONS +=	--with-pammodulesdir=/usr/lib/samba/security$(MACHLIBDIR)

CONFIGURE_OPTIONS +=	--datarootdir=/usr/lib/samba

CONFIGURE_OPTIONS +=	--mandir=/usr/share/man

CONFIGURE_OPTIONS +=	--htmldir=/usr/share/samba/swat/help

CONFIGURE_OPTIONS +=	--includedir=/usr/include/samba

CONFIGURE_OPTIONS +=	--with-privatedir=/etc/samba/private

CONFIGURE_OPTIONS +=	--localstatedir=/var/samba

CONFIGURE_OPTIONS +=	--with-logfilebase=/var/samba/log

CONFIGURE_OPTIONS +=	--sharedstatedir=/var/samba/com

CONFIGURE_OPTIONS +=	--libexecdir=/usr/lib/samba

# Whenever getfacl is found HAVE_SOLARIS_UNIXWARE_ACLS is set and

# vfs_solarisacl is placed into the list of the static modules

CONFIGURE_OPTIONS +=	--with-static-modules=

$(BUILD_DIR_SMB)/.configured:	CONFIGURE_OPTIONS += \

	--with-shared-modules=vfs_worm,vfs_zfsacl,vfs_prealloc,vfs_cacheprime,vfs_commit,idmap_ldap,idmap_tdb2,idmap_rid,idmap_ad,idmap_hash,idmap_adex

$(BUILD_DIR_WINB)/.configured:	CONFIGURE_OPTIONS += \

	--with-shared-modules=idmap_ldap,idmap_tdb2,idmap_rid,idmap_ad,idmap_hash,idmap_adex

CONFIGURE_OPTIONS +=	--with-ads

CONFIGURE_OPTIONS +=	--with-winbind

CONFIGURE_OPTIONS +=	--with-ldap

CONFIGURE_OPTIONS +=	--with-libldap=ldap_r

CONFIGURE_OPTIONS +=	--with-system-mitkrb5

CONFIGURE_OPTIONS +=	--without-ad-dc

CONFIGURE_OPTIONS +=	--nocache

CONFIGURE_OPTIONS +=	--nopyo

CONFIGURE_OPTIONS +=	--disable-rpath

CONFIGURE_OPTIONS +=	--disable-gnutls

CONFIGURE_OPTIONS +=	--bundled-libraries=ALL

#$(BUILD_DIR_SMB)/.configured:	CONFIGURE_OPTIONS +=	--with-samfs=$(PROTO_DIR)/opt/SUNWsamfs/lib

CONFIGURE_ENV += 	CC="$(CC)"

CONFIGURE_ENV += 	CPP="$(CC) -E"

CONFIGURE_ENV += 	AWK=gawk

CONFIGURE_ENV += 	PERL=$(PERL)

CONFIGURE_ENV += 	PYTHONDIR="$(PYTHON_VENDOR_PACKAGES)"

CONFIGURE_ENV += 	PYTHONARCHDIR="$(PYTHON_VENDOR_PACKAGES)/samba"

CONFIGURE_ENV += 	LD="$(LD)"

CONFIGURE_ENV +=	CFLAGS="$(CFLAGS)"

CONFIGURE_ENV +=	CPPFLAGS="$(CPPFLAGS) -I$(PROTO_DIR)/usr/include -I$(COMPONENT_DIR)/Solaris/include"

CONFIGURE_ENV +=	LINKFLAGS="$(LD_OPTIONS) $(LDFLAGS)"

CONFIGURE_ENV.64 +=	MACH64="$(MACH64)"

CONFIGURE_ENV +=	LD_EXEC_OPTIONS="$(LD_EXEC_OPTIONS)"

CONFIGURE_ENV +=	CUPS_CONFIG=$(USRBINDIR)/cups-config

CONFIGURE_ENV += 	INSTALL="$(INSTALL)"

# Propagation of smb.conf with default settings.

$(PROTO_DIR)/etc/samba/smb.conf-example: $(BUILD_DIR_SMB)/.built

	$(MKDIR) $(@D)

	sed -f $(COMPONENT_DIR)/Solaris/smbconf.sed > $@ \

	   $(BUILD_DIR_SMB)/examples/smb.conf.default

# Build targets for WAF:

# (motivation) Samba started to use WAF (build system from Google) from the 3.x

# (as a parallel build system) but Samba4 discontinued the use of auto tools

# definitively.

# (note) .BDprep target is an additional step between .prep and .configure

# targets. It was added because there were problems with libtool-like phase of

# WAF when the not "prepared well". "waf distclean" on CLONEY'ed BUILD_DIR is

# enough.

# Prepare build dir for Samba + Winbind.

$(BUILD_DIR_SMB)/.BDprep: $(SOURCE_DIR)/.prep

	# re-create configure dir

	$(MKDIR) $(@D)

	# Clone SOURCE_DIR

	$(CLONEY) $(SOURCE_DIR) $(@D)

	# clenup of clone

	(cd $(@D) ; $(ENV) - $(WAF_PATH) waf distclean $(WAFOPT1) )

	$(TOUCH) $@

# Configure of Samba + Winbind.

$(BUILD_DIR_SMB)/.configured: $(BUILD_DIR_SMB)/.BDprep

	(cd $(@D) ; $(ENV) - $(WAF_PATH) $(CONFIGURE_ENV) $(CONFIGURE_ENV.$(BITS)) \

		waf configure $(WAFOPT1) $(CONFIGURE_OPTIONS) $(CONFIGURE_OPTIONS.$(BITS)) )

	$(TOUCH) $@

# Depends on S12-only libraries from Desktop to build.

ifeq ($(BUILD_TYPE), evaluation)

$(BUILD_DIR_SMB)/.built:

$(BUILD_DIR_SMB)/.installed:

$(BUILD_DIR_WINB)/.built:

$(BUILD_DIR_WINB)/.installed:

PUBLISH_STAMP=

else

# Build of Samba + Winbind.

$(BUILD_DIR_SMB)/.built:	$(BUILD_DIR_SMB)/.configured

	(cd $(@D) ; $(ENV) - $(WAF_PATH) LD_EXEC_OPTIONS="$(LD_EXEC_OPTIONS)" waf build $(WAFOPT1) )

	$(TOUCH) $@

# Install of Samba + Winbind.

$(BUILD_DIR_SMB)/.installed:	$(BUILD_DIR_SMB)/.built

	(cd $(@D) ; $(ENV) - $(WAF_PATH) LD_EXEC_OPTIONS="$(LD_EXEC_OPTIONS)" waf install $(WAFOPT1) --destdir=$(PROTO_DIR) )

	$(PYTHON) -m compileall $(PROTO_DIR)/$(PYTHON_VENDOR_PACKAGES)/

	$(TOUCH) $@

# Prepare build dir for Winbind (without Samba) for different bitness.

$(BUILD_DIR_WINB)/.BDprep: $(SOURCE_DIR)/.prep

	# re-create configure dir

	$(MKDIR) $(@D)

	# Clone SOURCE_DIR

	$(CLONEY) $(SOURCE_DIR) $(@D)

	# clenup of clone

	(cd $(@D) ; $(ENV) - $(WAF_PATH) waf distclean $(WAFOPT1) )

	$(TOUCH) $@

# Configure of Winbind (without Samba) for different bitness.

$(BUILD_DIR_WINB)/.configured: $(BUILD_DIR_WINB)/.BDprep

	(cd $(@D) ; $(ENV) - $(WAF_PATH) $(CONFIGURE_ENV) $(CONFIGURE_ENV.$(BITS)) \

		waf configure $(WAFOPT1) $(CONFIGURE_OPTIONS) $(CONFIGURE_OPTIONS.$(BITS)) )

	$(TOUCH) $@

# Build of Winbind (without Samba) for different bitness.

WB_TARGETS =	--targets=nss_winbind,pamwinbind

$(BUILD_DIR_WINB)/.built:	$(BUILD_DIR_WINB)/.configured

	(cd $(@D) ; $(ENV) - $(WAF_PATH) LD_EXEC_OPTIONS="$(LD_EXEC_OPTIONS)" waf build $(WAFOPT1) \

	    $(WB_TARGETS) )

	$(TOUCH) $@

# Installf Winbind (without Samba) for different bitness.

$(BUILD_DIR_WINB)/.installed:	$(BUILD_DIR_WINB)/.built

	/bin/sh -c "cd $(@D) ; \

	    $(INSTALL) -d $(PROTO_DIR)/usr/lib/samba$(MACHLIBDIR) ; \

	    $(INSTALL) -m 0555 -t $(PROTO_DIR)/usr/lib/samba$(MACHLIBDIR) bin/shared/!(pam_*).so* ; \

	    $(INSTALL) -d $(PROTO_DIR)/usr/lib/samba/security$(MACHLIBDIR) ; \

	    $(INSTALL) -m 0555 -t $(PROTO_DIR)/usr/lib/samba/security$(MACHLIBDIR) bin/shared/pam_*.so* ; \

	    $(INSTALL) -d $(PROTO_DIR)/usr/lib/samba/private$(MACHLIBDIR) ; \

	    $(INSTALL) -m 0555 -t $(PROTO_DIR)/usr/lib/samba/private$(MACHLIBDIR) bin/shared/private/*.so* \

	"

	$(TOUCH) $@

endif

# Set appropriate bitnesses for Samba + Winbind / Winbind (without Samba).

$(BUILD_DIR_SMB)/.configured:	BITS=64

$(BUILD_DIR_SMB)/.configured:	MACHLIBDIR=/$(MACH64)	

$(BUILD_DIR_WINB)/.configured:	BITS=32

$(BUILD_DIR_WINB)/.configured $(BUILD_DIR_WINB)/.installed:	MACHLIBDIR=

# common targets

build:		$(BUILD_DIR_SMB)/.built $(BUILD_DIR_WINB)/.built

include $(WS_MAKE_RULES)/shared-targets.mk

install:	$(BUILD_DIR_SMB)/.installed $(BUILD_DIR_WINB)/.installed

	# set version of python interpreter for pkglint

	find $(PROTO_DIR) -name \*.py -print0 | \

	   while IFS= read -r -d $$'\0' file; do \

		/usr/bin/sed -e '1,1s&^#!.*python[:blank:]\{0,\}$$&#!$(PYTHON.$(PYTHON_VERSION))&' \

		   $$file > $$file.pyverset ; \

	   done

	find $(PROTO_DIR) -name \*.py.pyverset -print0 | \

	   while IFS= read -r -d $$'\0' file; do \

		$(MV) $$file `echo $$file | sed -e 's/[.]pyverset$$//'` ; \

	   done

test:		$(NO_TESTS)

system-test:    $(NO_TESTS)

clean::

	$(RM) -r $(BUILD_DIR)

REQUIRED_PACKAGES += library/file-monitor/gamin

REQUIRED_PACKAGES += library/libarchive

REQUIRED_PACKAGES += library/print/cups-libs

REQUIRED_PACKAGES += $(PERL_PKG)

REQUIRED_PACKAGES += runtime/python-27

REQUIRED_PACKAGES += security/kerberos-5

REQUIRED_PACKAGES += shell/ksh93

REQUIRED_PACKAGES += system/core-os

REQUIRED_PACKAGES += system/library

REQUIRED_PACKAGES += system/library/libdbus

REQUIRED_PACKAGES += system/library/security/crypto

REQUIRED_PACKAGES += system/network

REQUIRED_PACKAGES += system/network/avahi

REQUIRED_PACKAGES += system/network/ldap/openldap