1 # |
|
2 # Recommended minimum configuration: |
|
3 # |
|
4 acl manager proto cache_object |
|
5 acl localhost src 127.0.0.1/32 ::1 |
|
6 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 |
|
7 |
|
8 # Example rule allowing access from your local networks. |
|
9 # Adapt to list your (internal) IP networks from where browsing |
|
10 # should be allowed |
|
11 acl localnet src 10.0.0.0/8 # RFC1918 possible internal network |
|
12 acl localnet src 172.16.0.0/12 # RFC1918 possible internal network |
|
13 acl localnet src 192.168.0.0/16 # RFC1918 possible internal network |
|
14 acl localnet src fc00::/7 # RFC 4193 local private network range |
|
15 acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines |
|
16 |
|
17 acl SSL_ports port 443 |
|
18 acl Safe_ports port 80 # http |
|
19 acl Safe_ports port 21 # ftp |
|
20 acl Safe_ports port 443 # https |
|
21 acl Safe_ports port 70 # gopher |
|
22 acl Safe_ports port 210 # wais |
|
23 acl Safe_ports port 1025-65535 # unregistered ports |
|
24 acl Safe_ports port 280 # http-mgmt |
|
25 acl Safe_ports port 488 # gss-http |
|
26 acl Safe_ports port 591 # filemaker |
|
27 acl Safe_ports port 777 # multiling http |
|
28 acl CONNECT method CONNECT |
|
29 |
|
30 # |
|
31 # Recommended minimum Access Permission configuration: |
|
32 # |
|
33 # Only allow cachemgr access from localhost |
|
34 http_access allow manager localhost |
|
35 http_access deny manager |
|
36 |
|
37 # Deny requests to certain unsafe ports |
|
38 http_access deny !Safe_ports |
|
39 |
|
40 # Deny CONNECT to other than secure SSL ports |
|
41 http_access deny CONNECT !SSL_ports |
|
42 |
|
43 # We strongly recommend the following be uncommented to protect innocent |
|
44 # web applications running on the proxy server who think the only |
|
45 # one who can access services on "localhost" is a local user |
|
46 #http_access deny to_localhost |
|
47 |
|
48 # |
|
49 # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS |
|
50 # |
|
51 |
|
52 # Example rule allowing access from your local networks. |
|
53 # Adapt localnet in the ACL section to list your (internal) IP networks |
|
54 # from where browsing should be allowed |
|
55 http_access allow localnet |
|
56 http_access allow localhost |
|
57 |
|
58 # And finally deny all other access to this proxy |
|
59 http_access deny all |
|
60 |
|
61 # Squid normally listens to port 3128 |
|
62 http_port 3128 |
|
63 |
|
64 # We recommend you to use at least the following line. |
|
65 hierarchy_stoplist cgi-bin ? |
|
66 |
|
67 # Uncomment and adjust the following to add a disk cache directory. |
|
68 #cache_dir ufs /var/squid/cache 100 16 256 |
|
69 |
|
70 # Leave coredumps in the first cache dir |
|
71 coredump_dir /var/squid/cache |
|
72 |
|
73 # Add any of your own refresh_pattern entries above these. |
|
74 refresh_pattern ^ftp: 1440 20% 10080 |
|
75 refresh_pattern ^gopher: 1440 0% 1440 |
|
76 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 |
|
77 refresh_pattern . 0 20% 4320 |
|
78 |
|
79 # TAG: cache_effective_user |
|
80 # If you start Squid as root, it will change its effective/real |
|
81 # UID/GID to the user specified below. The default is to change |
|
82 # to UID to nobody. If you define cache_effective_user, but not |
|
83 # cache_effective_group, Squid sets the GID to the effective |
|
84 # user's default group ID (taken from the password file) and |
|
85 # supplementary group list from the from groups membership of |
|
86 # cache_effective_user. |
|
87 # |
|
88 #Default: |
|
89 cache_effective_user webservd |
|
90 |
|
91 # TAG: cache_effective_group |
|
92 # If you want Squid to run with a specific GID regardless of |
|
93 # the group memberships of the effective user then set this |
|
94 # to the group (or GID) you want Squid to run as. When set |
|
95 # all other group privileges of the effective user is ignored |
|
96 # and only this GID is effective. If Squid is not started as |
|
97 # root the user starting Squid must be member of the specified |
|
98 # group. |
|
99 # |
|
100 #Default: |
|
101 # none |
|