--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/components/python/python34/Makefile Mon May 19 07:37:20 2014 -0700
@@ -0,0 +1,146 @@
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+#
+
+include ../../../make-rules/shared-macros.mk
+
+COMPONENT_NAME= Python
+COMPONENT_VERSION= 3.4.0
+COMPONENT_PROJECT_URL= http://python.org/
+COMPONENT_SRC= $(COMPONENT_NAME)-$(COMPONENT_VERSION)
+COMPONENT_ARCHIVE= $(COMPONENT_SRC).tar.xz
+COMPONENT_ARCHIVE_HASH= \
+ sha256:f13686c0a2d45e7146759e9d5d1cbd8097a0606483c0cf7730e1e13f58b14cbe
+COMPONENT_ARCHIVE_URL= $(COMPONENT_PROJECT_URL)ftp/python/$(COMPONENT_VERSION)/$(COMPONENT_ARCHIVE)
+COMPONENT_BUGDB= utility/python
+
+include $(WS_TOP)/make-rules/prep.mk
+include $(WS_TOP)/make-rules/configure.mk
+include $(WS_TOP)/make-rules/ips.mk
+include $(WS_TOP)/make-rules/lint-libraries.mk
+
+# Need to preserve timestamp for Grammar files. If the pickle files are older,
+# Python will try to rebuild them.
+PKGSEND_PUBLISH_OPTIONS += -T \*Grammar\*.txt
+PKGSEND_PUBLISH_OPTIONS += -T \*Grammar\*.pickle
+
+# We patch auto* files, so regenerate headers and configure
+COMPONENT_PREP_ACTION = \
+ (cd $(@D) ; autoheader ; autoconf)
+
+# The DTrace patch needs this file to be mode 0755.
+COMPONENT_PRE_BUILD_ACTION=($(CHMOD) +x \
+ $(SOURCE_DIR)/Include/pydtrace_offsets.sh)
+
+# we don't want to leak $(CC_BITS) into BASECFLAGS as it causes problems with
+# python-config
+CC += $(CFLAGS)
+
+C99MODE=
+CPPFLAGS += -IPython
+
+# to find the ncurses headers
+CPPFLAGS += -I/usr/include/ncurses
+# enable large files how they did in JDS
+CPPFLAGS += -D_LARGEFILE64_SOURCE
+
+# libffi for _ctypes
+CPPFLAGS += $(shell pkg-config --cflags-only-I libffi)
+
+# because python links with $(CC) ... $(LDFLAGS) ...
+LDFLAGS = $(CC_BITS) $(CC_PIC)
+
+# build pic
+CFLAGS += $(CC_PIC)
+
+# The python build is profile-guided for studio; to see the benefits of that,
+# Python must be compiled with -xO5 and a different build target must be used.
+# Use of xprofile requires that the same options be used during compilation and
+# linking. The targets chosen are based on Solaris 11 minimum supported system
+# requirements.
+COMPONENT_BUILD_TARGETS = profile-opt
+XPROFILE_DIR = $(BUILD_DIR_$(BITS))/.profile
+PYFLAGS.i386 = -xtarget=opteron -xarch=sse2 -xcache=generic
+PYFLAGS.sparc =
+CFLAGS += -xO5 $(PYFLAGS.$(MACH))
+LDFLAGS += -xO5 $(PYFLAGS.$(MACH))
+
+# add /usr/gnu/lib to the library search/run path
+LDFLAGS.64 = -R/usr/gnu/lib/$(MACH64) -L/usr/gnu/lib/$(MACH64)
+LDFLAGS += $(LDFLAGS.$(BITS))
+
+# Python puts its header files in a special place.
+LINT_FLAGS += -I$(SOURCE_DIR)/Include
+
+CONFIGURE_OPTIONS += --infodir=$(CONFIGURE_INFODIR)
+CONFIGURE_OPTIONS += --enable-shared
+CONFIGURE_OPTIONS += --with-dtrace
+CONFIGURE_OPTIONS += --with-system-expat
+CONFIGURE_OPTIONS += --with-system-ffi
+CONFIGURE_OPTIONS += --without-gcc
+# Building with pymalloc is the default, but that causes core dumps;
+# see http://bugs.python.org/issue21412 for details.
+CONFIGURE_OPTIONS += --without-pymalloc
+CONFIGURE_OPTIONS += --without-ensurepip
+CONFIGURE_OPTIONS += --enable-ipv6
+CONFIGURE_OPTIONS += CPPFLAGS="$(CPPFLAGS)"
+CONFIGURE_OPTIONS += LDFLAGS="$(LDFLAGS)"
+CONFIGURE_OPTIONS += CFLAGS="$(CFLAGS)"
+CONFIGURE_OPTIONS += DFLAGS="-$(BITS)"
+CONFIGURE_OPTIONS += XPROFILE_DIR="$(XPROFILE_DIR)"
+
+COMPONENT_BUILD_ENV += DFLAGS="-$(BITS)"
+COMPONENT_BUILD_ENV += XPROFILE_DIR="$(XPROFILE_DIR)"
+
+# Some tests have non-ASCII characters encoded for international domain names;
+# the publish step will fail in 'pkgdepend generate' without this:
+COMPONENT_PUBLISH_ENV += LC_ALL=en_US.UTF-8
+
+# 64 bit shared objects need to go in a 64-bit directory
+COMPONENT_INSTALL_ARGS.64 += DESTSHARED=$(CONFIGURE_PREFIX)/lib/python3.4/lib-dynload
+
+ASLR_MODE = $(ASLR_ENABLE)
+
+# common targets
+build: $(BUILD_64)
+install: $(INSTALL_64)
+
+# Using "-uall,-network" ensures all tests are run except the network tests.
+# The network tests contain many expected failures when run behind a firewall.
+# The "-v" ensures verbose mode. You can set TESTOPTS_PYTHON_TEST to a
+# particular test if you want to run just one test. For example,
+# $ TESTOPTS_PYTHON_TEST=test_sys gmake -k test
+# Note that when a test succeeds, the builds/*/.tested file gets created. You
+# may need to remove these files, or run "gmake clobber" or "gmake clean"
+# between tests.
+#
+COMPONENT_TEST_ENV = EXTRATESTOPTS="-v -uall,-network $(TESTOPTS_PYTHON_TEST)"
+# Prevent the tests from getting stuck waiting for input.
+COMPONENT_TEST_TARGETS = test < /dev/null
+
+test: $(TEST_64)
+
+BUILD_PKG_DEPENDENCIES = $(BUILD_TOOLS)
+
+include $(WS_TOP)/make-rules/depend.mk