--- a/components/openstack/neutron/files/ml2_conf.ini	Wed Sep 07 14:48:41 2016 -0700
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,101 +0,0 @@
-[ml2]
-# (ListOpt) List of network type driver entrypoints to be loaded from
-# the neutron.ml2.type_drivers namespace.
-#
-# type_drivers = local,flat,vlan,gre,vxlan
-# Example: type_drivers = flat,vlan,gre,vxlan
-type_drivers = flat,vlan,vxlan
-
-# (ListOpt) Ordered list of network_types to allocate as tenant
-# networks. The default value 'local' is useful for single-box testing
-# but provides no connectivity between hosts.
-#
-# In the case of Solaris, 'local' can be achieved by using 'flat' network
-# type and Solaris Etherstubs, so 'local' network type as such is not
-# supported.
-#
-# tenant_network_types = local
-# Example: tenant_network_types = vlan,gre,vxlan
-tenant_network_types = vlan
-
-# (ListOpt) Ordered list of networking mechanism driver entrypoints
-# to be loaded from the neutron.ml2.mechanism_drivers namespace.
-# mechanism_drivers =
-# Example: mechanism_drivers = openvswitch,mlnx
-# Example: mechanism_drivers = arista
-# Example: mechanism_drivers = cisco,logger
-# Example: mechanism_drivers = openvswitch,brocade
-# Example: mechanism_drivers = linuxbridge,brocade
-mechanism_drivers = openvswitch
-
-# (ListOpt) Ordered list of extension driver entrypoints
-# to be loaded from the neutron.ml2.extension_drivers namespace.
-# extension_drivers =
-# Example: extension_drivers = anewextensiondriver
-
-# =========== items for MTU selection and advertisement =============
-# (IntOpt) Path MTU.  The maximum permissible size of an unfragmented
-# packet travelling from and to addresses where encapsulated Neutron
-# traffic is sent.  Drivers calculate maximum viable MTU for
-# validating tenant requests based on this value (typically,
-# path_mtu - max encap header size).  If <=0, the path MTU is
-# indeterminate and no calculation takes place.
-# path_mtu = 0
-
-# (IntOpt) Segment MTU.  The maximum permissible size of an
-# unfragmented packet travelling a L2 network segment.  If <=0,
-# the segment MTU is indeterminate and no calculation takes place.
-# segment_mtu = 0
-
-# (ListOpt) Physical network MTUs.  List of mappings of physical
-# network to MTU value.  The format of the mapping is
-# <physnet>:<mtu val>.  This mapping allows specifying a
-# physical network MTU value that differs from the default
-# segment_mtu value.
-# physical_network_mtus =
-# Example: physical_network_mtus = physnet1:1550, physnet2:1500
-# ======== end of items for MTU selection and advertisement =========
-
-[ml2_type_flat]
-# (ListOpt) List of physical_network names with which flat networks
-# can be created. Use * to allow flat networks with arbitrary
-# physical_network names.
-#
-# flat_networks =
-# Example:flat_networks = physnet1,physnet2
-# Example:flat_networks = *
-
-[ml2_type_vlan]
-# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples
-# specifying physical_network names usable for VLAN provider and
-# tenant networks, as well as ranges of VLAN tags on each
-# physical_network available for allocation as tenant networks.
-#
-# network_vlan_ranges =
-# Example: network_vlan_ranges = physnet1:1000:2999,physnet2
-
-[ml2_type_gre]
-# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation
-# tunnel_id_ranges =
-
-[ml2_type_vxlan]
-# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating
-# ranges of VXLAN VNI IDs that are available for tenant network allocation.
-#
-# vni_ranges =
-
-# (StrOpt) Multicast group for the VXLAN interface. When configured, will
-# enable sending all broadcast traffic to this multicast group. When left
-# unconfigured, will disable multicast VXLAN mode.
-#
-# vxlan_group =
-# Example: vxlan_group = 239.1.1.1
-
-[securitygroup]
-# Controls if neutron security group is enabled or not.
-# It should be false when you use nova security group.
-enable_security_group = False
-
-# Use ipset to speed-up the iptables security groups. Enabling ipset support
-# requires that ipset is installed on L2 agent node.
-enable_ipset = False