20460079 bison should have some master test results to compare against
20460105 bzip should have some master test results to compare against
20460798 gnu make should have some master test results to compare against
20461231 tcsh should have some master test results to compare against
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2010, 2015, Oracle and/or its affiliates. All rights reserved.
#
# $ (foreach suffix,$(VERSIONS),$(eval include $(WS_MAKE_RULES)/python-$(suffix).mk))
$(BUILD_DIR)/%-2.6/.built: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.built: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.built: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.built: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.built: BITS=64
$(BUILD_DIR)/%-2.6/.installed: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.installed: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.installed: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.installed: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.installed: BITS=64
$(BUILD_DIR)/%-2.6/.tested: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.tested: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.tested: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.tested: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.tested: BITS=64
$(BUILD_DIR)/%-2.6/.tested-and-compared: PYTHON_VERSION=2.6
$(BUILD_DIR)/%-2.7/.tested-and-compared: PYTHON_VERSION=2.7
$(BUILD_DIR)/%-3.4/.tested-and-compared: PYTHON_VERSION=3.4
$(BUILD_DIR)/$(MACH32)-%/.tested-and-compared: BITS=32
$(BUILD_DIR)/$(MACH64)-%/.tested-and-compared: BITS=64
BUILD_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.built)
BUILD_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.built)
BUILD_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.built)
ifeq ($(PYTHON_VERSION),3.4)
BUILD_32_and_64 = $(BUILD_64)
endif
INSTALL_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.installed)
INSTALL_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.installed)
INSTALL_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.installed)
ifeq ($(PYTHON_VERSION),3.4)
INSTALL_32_and_64 = $(INSTALL_64)
endif
PYTHON_ENV = CC="$(CC)"
PYTHON_ENV += CFLAGS="$(CFLAGS)"
PYTHON_ENV += PATH="$(PATH):$(SPRO_VROOT)/bin"
COMPONENT_BUILD_ENV += $(PYTHON_ENV)
COMPONENT_INSTALL_ENV += $(PYTHON_ENV)
COMPONENT_TEST_ENV += $(PYTHON_ENV)
# If we are building Python 2.7 or 3.4 support, build them and install them
# before Python 2.6, so 2.6 is installed last and is the canonical version.
# When we change the default, the new default should go last.
ifneq ($(findstring 2.7,$(PYTHON_VERSIONS)),)
$(BUILD_DIR)/%-2.6/.built: $(BUILD_DIR)/%-2.7/.built
$(BUILD_DIR)/%-2.6/.installed: $(BUILD_DIR)/%-2.7/.installed
endif
ifneq ($(findstring 3.4,$(PYTHON_VERSIONS)),)
$(BUILD_DIR)/%-2.6/.built: $(BUILD_DIR)/%-3.4/.built
$(BUILD_DIR)/%-2.6/.installed: $(BUILD_DIR)/%-3.4/.installed
endif
# Create a distutils config file specific to the combination of build
# characteristics (bittedness x Python version), and put it in its own
# directory. We can set $HOME to point distutils at it later, allowing
# the install phase to find the temporary build directories.
CFG=.pydistutils.cfg
$(BUILD_DIR)/config-%/$(CFG):
$(MKDIR) $(@D)
echo "[build]\nbuild_base = $(BUILD_DIR)/$*" > $@
# build the configured source
$(BUILD_DIR)/%/.built: $(SOURCE_DIR)/.prep $(BUILD_DIR)/config-%/$(CFG)
$(RM) -r $(@D) ; $(MKDIR) $(@D)
$(COMPONENT_PRE_BUILD_ACTION)
(cd $(SOURCE_DIR) ; $(ENV) HOME=$(BUILD_DIR)/config-$* $(COMPONENT_BUILD_ENV) \
$(PYTHON.$(BITS)) ./setup.py build)
$(COMPONENT_POST_BUILD_ACTION)
ifeq ($(strip $(PARFAIT_BUILD)),yes)
-$(PARFAIT) $(@D)
endif
$(TOUCH) $@
COMPONENT_INSTALL_ARGS += --root $(PROTO_DIR)
COMPONENT_INSTALL_ARGS += --install-lib=$(PYTHON_LIB)
COMPONENT_INSTALL_ARGS += --install-purelib=$(PYTHON_LIB)
COMPONENT_INSTALL_ARGS += --install-platlib=$(PYTHON_LIB)
COMPONENT_INSTALL_ARGS += --install-data=$(PYTHON_DATA)
COMPONENT_INSTALL_ARGS += --force
# install the built source into a prototype area
$(BUILD_DIR)/%/.installed: $(BUILD_DIR)/%/.built $(BUILD_DIR)/config-%/$(CFG)
$(COMPONENT_PRE_INSTALL_ACTION)
(cd $(SOURCE_DIR) ; $(ENV) HOME=$(BUILD_DIR)/config-$* $(COMPONENT_INSTALL_ENV) \
$(PYTHON.$(BITS)) ./setup.py install $(COMPONENT_INSTALL_ARGS))
$(COMPONENT_POST_INSTALL_ACTION)
$(TOUCH) $@
# Define bit specific and Python version specific filenames.
COMPONENT_TEST_MASTER = $(COMPONENT_TEST_RESULTS_DIR)/results-$(PYTHON_VERSION)-$(BITS).master
COMPONENT_TEST_OUTPUT = $(COMPONENT_TEST_BUILD_DIR)/test-$(PYTHON_VERSION)-$(BITS)-results
COMPONENT_TEST_DIFFS = $(COMPONENT_TEST_BUILD_DIR)/test-$(PYTHON_VERSION)-$(BITS)-diffs
COMPONENT_TEST_SNAPSHOT = $(COMPONENT_TEST_BUILD_DIR)/results-$(PYTHON_VERSION)-$(BITS).snapshot
COMPONENT_TEST_TRANSFORM_CMD = $(COMPONENT_TEST_BUILD_DIR)/transform-$(PYTHON_VERSION)-$(BITS)-results
COMPONENT_TEST_DEP = $(BUILD_DIR)/%/.installed
COMPONENT_TEST_DIR = $(COMPONENT_SRC)/test
COMPONENT_TEST_ENV_CMD = $(ENV)
COMPONENT_TEST_ENV += PYTHONPATH=$(PROTO_DIR)$(PYTHON_VENDOR_PACKAGES)
COMPONENT_TEST_CMD = $(PYTHON)
COMPONENT_TEST_ARGS += ./runtests.py
# determine the type of tests we want to run.
ifeq ($(strip $(wildcard $(COMPONENT_TEST_RESULTS_DIR)/results-*.master)),)
TEST_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.tested)
TEST_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.tested)
TEST_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.tested)
else
TEST_32 = $(PYTHON2_VERSIONS:%=$(BUILD_DIR)/$(MACH32)-%/.tested-and-compared)
TEST_64 = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH64)-%/.tested-and-compared)
TEST_NO_ARCH = $(PYTHON_VERSIONS:%=$(BUILD_DIR)/$(MACH)-%/.tested-and-compared)
endif
ifeq ($(PYTHON_VERSION),3.4)
TEST_32_and_64 = $(TEST_64)
endif
# test the built source
$(BUILD_DIR)/%/.tested-and-compared: $(COMPONENT_TEST_DEP)
$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
$(COMPONENT_PRE_TEST_ACTION)
-(cd $(COMPONENT_TEST_DIR) ; \
$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
$(COMPONENT_TEST_CMD) $(COMPONENT_TEST_ARGS)) \
&> $(COMPONENT_TEST_OUTPUT)
$(COMPONENT_POST_TEST_ACTION)
$(COMPONENT_TEST_CREATE_TRANSFORMS)
$(COMPONENT_TEST_PERFORM_TRANSFORM)
$(COMPONENT_TEST_COMPARE)
$(COMPONENT_TEST_CLEANUP)
$(TOUCH) $@
$(BUILD_DIR)/%/.tested: $(COMPONENT_TEST_DEP)
$(COMPONENT_PRE_TEST_ACTION)
(cd $(COMPONENT_TEST_DIR) ; \
$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
$(COMPONENT_TEST_CMD) $(COMPONENT_TEST_ARGS))
$(COMPONENT_POST_TEST_ACTION)
$(COMPONENT_TEST_CLEANUP)
$(TOUCH) $@
ifeq ($(strip $(PARFAIT_BUILD)),yes)
parfait: build
else
parfait:
$(MAKE) PARFAIT_BUILD=yes parfait
endif
clean::
$(RM) -r $(SOURCE_DIR) $(BUILD_DIR)
# Make it easy to construct a URL for a pypi source download.
PYPI_BASE = http://pypi.python.org/packages/source
pypi_url = $(PYPI_BASE)/$(shell echo $(COMPONENT_NAME) | cut -c1)/$(COMPONENT_NAME)/$(COMPONENT_ARCHIVE)
ifneq ($(findstring 2.6, $(PYTHON_VERSIONS)),)
REQUIRED_PACKAGES += runtime/python-26
endif
ifneq ($(findstring 2.7, $(PYTHON_VERSIONS)),)
REQUIRED_PACKAGES += runtime/python-27
endif
ifneq ($(findstring 3.4, $(PYTHON_VERSIONS)),)
REQUIRED_PACKAGES += runtime/python-34
endif
REQUIRED_PACKAGES += library/python/setuptools