#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2011, 2016, Oracle and/or its affiliates. All rights reserved.
#
# makemaker.mk is used to build, install, test perl modules for
# each version of perl.
# Packaging these multiple versions is still handled by ips.mk.
# Look under perl_modules for examples of usage.
# Multiple versions of perl processing is achieved by listing targets
# for each version and adding BUILD_64/INSTALL_64 targets below.
# Example:
# $(BUILD_DIR)/$(MACH64)-5.24/.configured: PERL_VERSION=5.24
# $(BUILD_DIR)/$(MACH64)-5.24/.configured: BITS=64
# BUILD_64 += $(BUILD_DIR)/$(MACH64)-5.24/.built
# INSTALL_64 += $(BUILD_DIR)/$(MACH64)-5.24/.installed
# TEST_64 += $(BUILD_DIR)/$(MACH64)-5.24/.tested
# TEST_64 += $(BUILD_DIR)/$(MACH64)-5.24/.tested-and-compared
# and so on.
COMMON_PERL_ENV += MAKE=$(GMAKE)
COMMON_PERL_ENV += PATH=$(dir $(CC)):$(SPRO_VROOT)/bin:$(PATH)
COMMON_PERL_ENV += LANG=""
COMMON_PERL_ENV += CC="$(CC)"
COMMON_PERL_ENV += CFLAGS="$(PERL_OPTIMIZE)"
# Yes. Perl is just scripts, for now, but we need architecture
# directories so that it populates all architecture prototype
# directories.
$(BUILD_DIR)/$(MACH64)-5.22/.configured: PERL_VERSION=5.22
$(BUILD_DIR)/$(MACH64)-5.22/.configured: BITS=64
$(BUILD_DIR)/$(MACH64)-5.22/.tested: PERL_VERSION=5.22
$(BUILD_DIR)/$(MACH64)-5.22/.tested: BITS=64
$(BUILD_DIR)/$(MACH64)-5.22/.tested-and-compared: PERL_VERSION=5.22
$(BUILD_DIR)/$(MACH64)-5.22/.tested-and-compared: BITS=64
$(BUILD_DIR)/$(MACH64)-5.22/.system-tested: PERL_VERSION=5.22
$(BUILD_DIR)/$(MACH64)-5.22/.system-tested: BITS=64
$(BUILD_DIR)/$(MACH64)-5.22/.system-tested-and-compared: PERL_VERSION=5.22
$(BUILD_DIR)/$(MACH64)-5.22/.system-tested-and-compared: BITS=64
BUILD_64 = $(BUILD_DIR)/$(MACH64)-5.22/.built
INSTALL_64 = $(BUILD_DIR)/$(MACH64)-5.22/.installed
COMPONENT_CONFIGURE_ENV += $(COMMON_PERL_ENV)
COMPONENT_CONFIGURE_ENV += PERL="$(PERL)"
$(BUILD_DIR)/%/.configured: $(SOURCE_DIR)/.prep
($(RM) -r $(@D) ; $(MKDIR) $(@D))
$(CLONEY) $(SOURCE_DIR) $(@D)
$(COMPONENT_PRE_CONFIGURE_ACTION)
(cd $(@D) ; $(COMPONENT_CONFIGURE_ENV) $(PERL) $(PERL_FLAGS) \
Makefile.PL $(CONFIGURE_OPTIONS))
$(COMPONENT_POST_CONFIGURE_ACTION)
$(TOUCH) $@
COMPONENT_BUILD_ENV += $(COMMON_PERL_ENV)
$(BUILD_DIR)/%/.built: $(BUILD_DIR)/%/.configured
$(COMPONENT_PRE_BUILD_ACTION)
(cd $(@D) ; $(ENV) $(COMPONENT_BUILD_ENV) \
$(GMAKE) $(COMPONENT_BUILD_ARGS) $(COMPONENT_BUILD_TARGETS))
$(COMPONENT_POST_BUILD_ACTION)
ifeq ($(strip $(PARFAIT_BUILD)),yes)
-$(PARFAIT) $(@D)
endif
$(TOUCH) $@
COMPONENT_INSTALL_ARGS += DESTDIR="$(PROTO_DIR)"
COMPONENT_INSTALL_TARGETS = install_vendor
COMPONENT_INSTALL_ENV += $(COMMON_PERL_ENV)
$(BUILD_DIR)/%/.installed: $(BUILD_DIR)/%/.built
$(COMPONENT_PRE_INSTALL_ACTION)
(cd $(@D) ; $(ENV) $(COMPONENT_INSTALL_ENV) $(GMAKE) \
$(COMPONENT_INSTALL_ARGS) $(COMPONENT_INSTALL_TARGETS))
$(COMPONENT_POST_INSTALL_ACTION)
$(TOUCH) $@
# Define bit specific and Perl version specific filenames.
COMPONENT_TEST_MASTER = $(COMPONENT_TEST_RESULTS_DIR)/results-$(PERL_VERSION)-$(BITS).master
COMPONENT_TEST_OUTPUT = $(COMPONENT_TEST_BUILD_DIR)/test-$(PERL_VERSION)-$(BITS)-results
COMPONENT_TEST_DIFFS = $(COMPONENT_TEST_BUILD_DIR)/test-$(PERL_VERSION)-$(BITS)-diffs
COMPONENT_TEST_SNAPSHOT = $(COMPONENT_TEST_BUILD_DIR)/results-$(PERL_VERSION)-$(BITS).snapshot
COMPONENT_TEST_TRANSFORM_CMD = $(COMPONENT_TEST_BUILD_DIR)/transform-$(PERL_VERSION)-$(BITS)-results
COMPONENT_TEST_TARGETS = check
COMPONENT_TEST_ENV += $(COMMON_PERL_ENV)
COMPONENT_SYSTEM_TEST_TARGETS = check
COMPONENT_SYSTEM_TEST_ENV += $(COMMON_PERL_ENV)
# determine the type of tests we want to run.
ifeq ($(strip $(wildcard $(COMPONENT_TEST_RESULTS_DIR)/results-*.master)),)
TEST_64 = $(BUILD_DIR)/$(MACH64)-5.22/.tested
else
TEST_64 = $(BUILD_DIR)/$(MACH64)-5.22/.tested-and-compared
endif
ifeq ($(strip $(wildcard $(COMPONENT_TEST_RESULTS_DIR)/results-*.master)),)
SYSTEM_TEST_64 = $(BUILD_DIR)/$(MACH64)-5.22/.system-tested
else
SYSTEM_TEST_64 = $(BUILD_DIR)/$(MACH64)-5.22/.system-tested-and-compared
endif
# Test the built source. If the output file shows up in the environment or
# arguments, don't redirect stdout/stderr to it.
$(BUILD_DIR)/%/.tested-and-compared: $(BUILD_DIR)/%/.built
$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
$(COMPONENT_PRE_TEST_ACTION)
-(cd $(COMPONENT_TEST_DIR) ; \
$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
$(COMPONENT_TEST_CMD) \
$(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS)) \
$(if $(findstring $(COMPONENT_TEST_OUTPUT),$(COMPONENT_TEST_ENV)$(COMPONENT_TEST_ARGS)),,&> $(COMPONENT_TEST_OUTPUT))
$(COMPONENT_POST_TEST_ACTION)
$(COMPONENT_TEST_CREATE_TRANSFORMS)
$(COMPONENT_TEST_PERFORM_TRANSFORM)
$(COMPONENT_TEST_COMPARE)
$(COMPONENT_TEST_CLEANUP)
$(TOUCH) $@
$(BUILD_DIR)/%/.tested: $(BUILD_DIR)/%/.built
$(COMPONENT_PRE_TEST_ACTION)
(cd $(COMPONENT_TEST_DIR) ; \
$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
$(COMPONENT_TEST_CMD) \
$(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS))
$(COMPONENT_POST_TEST_ACTION)
$(COMPONENT_TEST_CLEANUP)
$(TOUCH) $@
# Test the installed packages. The targets above depend on .built which
# means $(CLONEY) has already run. System-test needs cloning but not
# building; thus ideally, we would want to depend on .cloned here and below,
# but since we don't have that, we depend on .prep and run $(CLONEY) here. If
# the output file shows up in the environment or arguments, don't redirect
# stdout/stderr to it.
$(BUILD_DIR)/%/.system-tested-and-compared: $(SOURCE_DIR)/.prep
$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
$(CLONEY) $(SOURCE_DIR) $(@D)
$(COMPONENT_PRE_SYSTEM_TEST_ACTION)
-(cd $(COMPONENT_SYSTEM_TEST_DIR) ; \
$(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \
$(COMPONENT_SYSTEM_TEST_CMD) \
$(COMPONENT_SYSTEM_TEST_ARGS) $(COMPONENT_SYSTEM_TEST_TARGETS)) \
$(if $(findstring $(COMPONENT_TEST_OUTPUT),$(COMPONENT_SYSTEM_TEST_ENV)$(COMPONENT_SYSTEM_TEST_ARGS)),,&> $(COMPONENT_TEST_OUTPUT))
$(COMPONENT_POST_SYSTEM_TEST_ACTION)
$(COMPONENT_TEST_CREATE_TRANSFORMS)
$(COMPONENT_TEST_PERFORM_TRANSFORM)
$(COMPONENT_TEST_COMPARE)
$(COMPONENT_SYSTEM_TEST_CLEANUP)
$(TOUCH) $@
$(BUILD_DIR)/%/.system-tested: $(SOURCE_DIR)/.prep
$(CLONEY) $(SOURCE_DIR) $(@D)
$(COMPONENT_PRE_SYSTEM_TEST_ACTION)
(cd $(COMPONENT_SYSTEM_TEST_DIR) ; \
$(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \
$(COMPONENT_SYSTEM_TEST_CMD) \
$(COMPONENT_SYSTEM_TEST_ARGS) $(COMPONENT_SYSTEM_TEST_TARGETS))
$(COMPONENT_POST_SYSTEM_TEST_ACTION)
$(COMPONENT_SYSTEM_TEST_CLEANUP)
$(TOUCH) $@
ifeq ($(strip $(PARFAIT_BUILD)),yes)
parfait: build
else
parfait:
$(MAKE) PARFAIT_BUILD=yes parfait
endif
ifneq ($(findstring 5.22, $(PERL_VERSIONS)),)
REQUIRED_PACKAGES += runtime/perl-522
endif