--- man/man8/tcsd.8.in	2010-01-28 08:27:51.000000000 -0800
+++ man/man8/tcsd.8.in	2012-04-16 17:46:52.763527000 -0700
@@ -51,10 +51,11 @@
 There are two types of access control for the \fBtcsd\fR, access to the
 daemon's socket itself and access to specific commands internal to the
 \fBtcsd\fR. Access to the \fBtcsd\fR's port should be controlled by the system
-administrator using firewall rules.  If using iptables, the following rule
-will allow a specific host access to the tcsd:
-
-# iptables -A INPUT -s $IP_ADDRESS -p tcp --destination-port @TCSD_DEFAULT_PORT@ -j ACCEPT
+administrator using firewall rules.
+If port = 0 in /etc/security/tcsd.conf, \fBtcsd\R uses a UNIX Domain socket.
+Otherwise, \fBtcsd\fR uses a TCP port.
+By default the TCP port, when enabled, is accessible only from localhost,
+unless "remote_ops" in tcsd.conf is not empty.
 
 Access to individual commands internal to the tcsd is configured by the
 \fBtcsd\fR configuration file's "remote_ops" directive. Each function call
@@ -74,12 +75,32 @@
 the TCS and stays valid across application lifetimes, \fBtcsd\fR restarts and 
 system resets. Data registered in system PS stays valid until an application 
 requests that it be removed. User PS files are by default stored as 
-/var/tpm/user.{pid} and the system PS file by default is /var/tpm/system.data. 
-The system PS file is initially created when ownership of the TPM is first 
-taken.
+/var/user/$USERNAME/tpm/userps/user.data and the system PS file by default is
+/var/tpm/system/system.data.  The system PS file is initially created when 
+ownership of the TPM is first taken.
+.PP
+\fB/var/tpm/system/system.data\fR
+.ad
+.RS 4n
+Contains the system PS (persistent storage) data controlled by the TCS.  By default,
+the SRK key is installed in PS and does not require owner authorization to use.  If the
+TPM has previously been provisioned and owner-auth is required to load the SRK,
+then the /var/tpm/system/system.data.auth file should be moved to 
+/var/tpm/system/system.data before starting the TCS (See NOTES).
+.RE
+.sp
+.PP
+\fB/var/tpm/system/system.data.auth\fR
+.ad
+.RS 4n
+This is the default PS data file to use if the TPM has been previously 
+configured to require owner-auth to access the SRK.  Copy this file 
+to /var/tpm/system/system.data prior to starting the TCS if owner-auth is
+needed, otherwise this file can be ignored.
+.RE
 
 .SH "CONFIGURATION"
-\fBtcsd\fR configuration is stored by default in /etc/tcsd.conf
+\fBtcsd\fR configuration is stored by default in /etc/security/tcsd.conf
 
 .SH "DEBUG OUTPUT"
 If TrouSerS has been compiled with debugging enabled, the debugging output
@@ -88,8 +109,9 @@
 .SH "DEVICE DRIVERS"
 .PP
 \fBtcsd\fR is compatible with the IBM Research TPM device driver available
-from http://www.research.ibm.com/gsal/tcpa and the TPM device driver available
-from http://sf.net/projects/tmpdd
+from http://www.research.ibm.com/gsal/tcpa and the TPM device driver for 
+Linux available from http://sf.net/projects/tmpdd.  It is also compatible 
+with the TPM device driver for Solaris which is available in the driver/crypto/tpm package.
 
 .SH "CONFORMING TO"
 .PP
@@ -98,7 +120,23 @@
 
 .SH "SEE ALSO"
 .PP
-\fBtcsd.conf\fR(5)
+\fBtcsd.conf\fR(5), \fBsvcadm\fR(8), \fBsmf\fR(7)
+
+.SH "NOTES"
+.sp
+.LP
+The \fBtcsd\fR service is managed by the service management facility, \fBsmf\fR(5), under
+the service identifier:
+.sp
+.in +2
+.nf
+svc:/application/security/tcsd:default
+.fi
+.in -2
+.sp
+.LP
+Administrative actions on this service, such as enabling, disabling, or requesting restart, can be
+performed using \fBsvcadm\fR(8). The service's status can be queried using the \fBsvcs\fR(1) command.
 
 .SH "AUTHOR"
 Kent Yoder