author Rich Burridge <>
Fri, 06 Feb 2015 12:30:31 -0800
changeset 3744 a74b6fa1af7a
parent 3716 a2629a2cf270
child 3747 d2f2bcf116e8
permissions -rw-r--r--
20455804 TWISTED should have some master test results to compare against 20471207 doc/testing.txt should advise removing build output from the master results

Testing of a userland component that provides tests is performed by hooking
those tests up to the 'test' target and running 'gmake test'. This should
generally pass, as failing tests may indicate things you have to fix, or
upstream tests that aren't applicable or need modifications on Solaris.

'gmake test' is often run when a component is upgraded or otherwise
intentionally changed, but sometimes it would be useful to rerun the tests
after something else has changed (such as the system being upgraded, or a
change in compilers) and see if that has affected the tests.

We do this by having a 'master test file' that contains the expected results,
and having a compare target that runs the tests and compares them with the

Note: because the initial test run and the current test run may have a
different environment (different users, different locales, different machines,
different compilers...) the results need to have all such output dependencies
removed or abstracted.

Setting up a master test file for a Userland component.

When setting up a test-and-compare run for a new component, you will need to
have master test file(s) that are identical for both the x86 and SPARC
platforms. It is suggested that they should initially be created by doing
something like the following in your x86 Userland workspace, then copied to
the same locations in your SPARC workspace and retested there.

When you run "gmake test", a check is made to see if there is a master
file of test results. If there is, then a test-then-compare run is performed.
If there isn't, then just a "normal" run of the test suite is performed.

The name of the master test file (or files to be exact), will depend upon
whether you have 32-bit, 64-bit, 32-and-64-bit and whether this is for a
Python or Perl component.

The default master file name is defined in
make-rules/ and is:




so that means it will default to looking for the following test file
master names:

32-bit: components/<component-name>/test/results-32.master

64-bit: components/<component-name>/test/results-64.master

both:   components/<component-name>/test/results-32.master

For Python, COMPONENT_TEST_MASTER is overridden in
make-rules/ to be:


so that means it's looking for one or more of:

2.6:   components/python/<component-name>/test/results-2.6-32.master
2.6:   components/python/<component-name>/test/results-2.6-64.master
2.7:   components/python/<component-name>/test/results-2.7-32.master
2.7:   components/python/<component-name>/test/results-2.7-64.master
3.4:   components/python/<component-name>/test/results-3.4-64.master

depending upon which versions of Python this component supports.

Perl is similar, with COMPONENT_TEST_MASTER being overridden in:
make-rules/ to be:


so that means it's looking for one or more of:

5.12:    components/perl_modules/<component>/test/results-5.12-32.master
5.12-mt: components/perl_modules/<component>/test/results-5.12-mt-32.master
5.16:    components/perl_modules/<component>/test/results-5.16-64.master

depending upon which versions of Perl this component supports.

Note that if the test results are the same for both 32-bit and 64-bit or
for all versions of Python or Perl, you can override the
COMPONENT_TEST_MASTER definition in your component Makefile and just supply
a single master files file. For example, in components/python/pep8 Makefile
we have:


In order to do a test-then-compare run rather than just run the component
test suite, initially just create an empty master test file (or files).

For example, for elinks, which just has 64-bit tests, do:

   $ cd components/elinks
   $ mkdir test
   $ touch test/results-64.master
   $ gmake test

At this point, you have a set of test results in

Even better, there are a set of "global" regular expressions that are
run on those test results to try to normalize them. The output from that
is placed in components/elinks/test/results-64.snapshot

You can now use the contents of that file as a first cut at the master results.

   $ cp test/results-64.snapshot test/results-64.master

Now run the tests again. Note that you have to get back to a clean start
just in case the test process tries to compile any code.

   $ gmake clean
   $ gmake test

At this point, it will again compare the test results against the master(s),
and if there are still differences, they will be placed in

Typically these differences will be for things like usernames, temporary
filenames, timings etc. If you have some differences, then you are going
to have to write special regexp expressions in your component Makefile to
"normalize" them, and adjust the master test results file so that it
matches what the normalized version looks like.

Transform examples.

1/ Handling temporary filenames.

See the transform in the asciidoc Makefile:

        '-e "s|/tmp......|/tmpxxxxxx|g" '

for how to "normalize" any temporary filenames that appear in the test results.

2/ Build related output.

Items (such as paths to compilers) should be removed from master test files.
For example, in testing the xz component, we get the following different
output for compiling a .c file for 32-bit and 64-bit on x86 and SPARC:

x86 32-bit:

/ws/on12-tools/SUNWspro/solarisstudio12.3/bin/cc -DHAVE_CONFIG_H -I. -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/tests -I..  -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/common -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/liblzma/api -I../lib  -D_REENTRANT  -m32 -xO4 -xchip=pentium -xregs=no%frameptr    -mt -c /builds/richb/twisted-tests/components/xz/xz-5.0.1/tests/test_check.c

x86 64-bit:

/ws/on12-tools/SUNWspro/solarisstudio12.3/bin/cc -DHAVE_CONFIG_H -I. -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/tests -I..  -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/common -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/liblzma/api -I../lib  -D_REENTRANT  -m64 -xO4 -xchip=generic -Ui386 -U__i386 -xregs=no%frameptr    -mt -c /builds/richb/twisted-tests/components/xz/xz-5.0.1/tests/test_check.c

SPARC 32-bit:

/ws/on12-tools/SUNWspro/solarisstudio12.3/bin/cc -DHAVE_CONFIG_H -I. -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/tests -I..  -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/common -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/liblzma/api -I../lib  -D_REENTRANT  -m32 -xO4 -xtarget=ultra2 -xarch=sparcvis -xchip=ultra2 -Qoption cg -xregs=no%appl -W2,-xwrap_int  -xmemalign=8s -mt -c /builds/richb/twisted-tests/components/xz/xz-5.0.1/tests/test_check.c

SPARC 64-bit:

/ws/on12-tools/SUNWspro/solarisstudio12.3/bin/cc -DHAVE_CONFIG_H -I. -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/tests -I..  -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/common -I/builds/richb/twisted-tests/components/xz/xz-5.0.1/src/liblzma/api -I../lib  -D_REENTRANT  -m64 -xO4  -xtarget=ultra2 -xarch=sparcvis -xchip=ultra2 -Qoption cg -xregs=no%appl -W2,-xwrap_int  -xmemalign=16s -mt -c /builds/richb/twisted-tests/components/xz/xz-5.0.1/tests/test_check.c

These can all be normalized (so that a single master test file can be used),
by adding the following line to COMPONENT_TEST_TRANSFORMS in the xz component

	'-e "s|\(^$(CC)\).*|\\$$(CC)|" '

The equivalent compile line in the master test file is now set to just:


Note that we are using $(CC) here which will pick up the current C compiler.
Should the C compiler or build options change in the future, then there will
be no need to adjust the master test results file to match. It's all done

It is recognized that an alternate approach to solving this problem is to
create a transform to just remove lines like this from the master test files,
but there is currently no automatic way to pick up the default compiler
(see CR #20367119 for more details).


There will be other examples as more components are adjusted to test
against master results files.

If a lot of people start generating the very same ones, then we can
consider adding them to the "global" set of regexps in
make-rules/ which currently looks like:

        '-e "s|$(@D)|\\$$(@D)|g" ' \
        '-e "s|$(PERL)|\\$$(PERL)|g" ' \
        '-e "s|$(SOURCE_DIR)|\\$$(SOURCE_DIR)|g" '

When your master test file(s) are in good shape, then you should "hg add"
them to your workspace.