make-rules/attpackagemake.mk
author Lijo George<lijo.x.george@oracle.com>
Sun, 10 May 2015 11:59:46 -0700
changeset 4268 d723f8ed85fe
parent 4252 891a844655c4
child 4305 90493abe0c5c
permissions -rw-r--r--
PSARC/2014/162 ksh93 update to 2012-08-01 17533968 ksh93 uprev to latest community version 17817727 ksh93: Right shift arithmetic substitution error for shifts of 64 bits or more 17699248 ksh93 double associative array handling bugs 17777549 "kill %%" with no background jobs , coredumps 18119738 ksh93 crashes in sfio area 18229654 ksh93 read not reentrant in alarm context dumps core 16169978 ksh93 memory corruption with redirection 18302723 ksh93 segv in sh_setmatch 16507675 external command in double-nested here-document hangs ksh93 18920300 remove pkglint Warnings in ksh93 build 18355790 /usr/bin/sh and /usr/sbin/sh should point to /usr/bin/ksh93 19907453 Session drop can cause ksh93 to become a fork bomb 18426052 SPARC /usr/bin/ksh is not an XPG6 executable 20808157 attpackagemake.mk test target needs the same environment as the build 20948390 ksh93 should have some master test results to compare against 20948350 attpackagemake.mk tested-and-compared target has mis-matched parentheses
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved.
#
#
# Rules and Macros for building opens source software that uses AT&T's package
# tool.
#
# To use these rules, include $(WS_MAKE_RULES)/attpackagemake.mk in your Makefile
# and define "build", "install" targets appropriate to building your component.
# Ex:
#
# 	build:		$(BUILD_32) \
#	 		$(BUILD_64)
# 
#	install:	$(INSTALL_32) \
#	 		$(INSTALL_64)
#
# Any additional pre/post configure, build, or install actions can be specified
# in your Makefile by setting them in on of the following macros:
#	COMPONENT_PRE_BUILD_ACTION, COMPONENT_POST_BUILD_ACTION
#	COMPONENT_PRE_INSTALL_ACTION, COMPONENT_POST_INSTALL_ACTION
#
# If component specific make targets need to be used for build or install, they
# can be specified in
#	COMPONENT_BUILD_TARGETS, COMPONENT_INSTALL_TARGETS
#

# Environment variables and arguments passed into the build and install
# environment(s).  These are the initial settings.
COMPONENT_BUILD_ENV += \
    CC_EXPLICIT="$(CC)" \
	PATH=$(shell dirname $(CC)):$(PATH) \
	CC=$(shell basename $(CC)) 
	NPROC="$(NPROC)" 

# This explicitly exports the build type for 32/64 bit distinction 
COMPONENT_BUILD_ARGS = \
						HOSTTYPE="$(HOSTTYPE$(BITS))" \
						CCFLAGS="$(CFLAGS)" \
						LDFLAGS="$(CXXFLAGS)" 

# The install and test process needs the same environment as the build
COMPONENT_INSTALL_ENV = $(COMPONENT_BUILD_ENV)
COMPONENT_INSTALL_ARGS = HOSTTYPE="$(HOSTTYPE$(BITS))"
COMPONENT_TEST_ENV = $(COMPONENT_BUILD_ENV)
COMPONENT_TEST_ARGS = $(COMPONENT_BUILD_ARGS)
COMPONENT_SYSTEM_TEST_ENV = $(COMPONENT_BUILD_ENV)
COMPONENT_SYSTEM_TEST_ARGS = $(COMPONENT_BUILD_ARGS) 

# build the configured source
$(BUILD_DIR)/%/.built:	$(SOURCE_DIR)/.prep
	$(RM) -r $(@D) ; $(MKDIR) $(@D)
	$(CLONEY) $(SOURCE_DIR) $(@D)
	$(COMPONENT_PRE_BUILD_ACTION)
	cd $(@D); $(ENV) $(COMPONENT_BUILD_ENV) \
   		bin/package make $(COMPONENT_BUILD_TARGETS) $(COMPONENT_BUILD_ARGS)
	$(COMPONENT_POST_BUILD_ACTION)
ifeq   ($(strip $(PARFAIT_BUILD)),yes)
	-$(PARFAIT) $(@D)
endif
	$(TOUCH) [email protected]

# install the built source into a prototype area
$(BUILD_DIR)/%/.installed:	$(BUILD_DIR)/%/.built
	$(COMPONENT_PRE_INSTALL_ACTION)
	$(RM) -r $(PROTO_DIR)/$(MACH$(BITS)); $(MKDIR) $(PROTO_DIR)/$(MACH$(BITS));
	cd $(@D); $(ENV) $(COMPONENT_INSTALL_ENV) \
		bin/package flat $(COMPONENT_INSTALL_TARGETS) \
		$(COMPONENT_INSTALL_ARGS) \
		$(PROTO_DIR)/$(MACH$(BITS)) $(COMPONENT_INSTALL_PACKAGES) 
	$(COMPONENT_POST_INSTALL_ACTION)
	$(TOUCH) [email protected]

# test the built source
$(BUILD_DIR)/%/.tested-and-compared:    $(BUILD_DIR)/%/.built
	$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
	$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
	$(COMPONENT_PRE_TEST_ACTION)
	-(cd $(COMPONENT_TEST_DIR) ; \
		$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
		bin/package test $(COMPONENT_TEST_TARGETS) \
		$(COMPONENT_TEST_ARGS)) \
		&> $(COMPONENT_TEST_OUTPUT)
	$(COMPONENT_POST_TEST_ACTION)
	$(COMPONENT_TEST_CREATE_TRANSFORMS)
	$(COMPONENT_TEST_PERFORM_TRANSFORM)
	$(COMPONENT_TEST_COMPARE)
	$(COMPONENT_TEST_CLEANUP)
	$(TOUCH) [email protected]

$(BUILD_DIR)/%/.tested:    $(BUILD_DIR)/%/.built
	$(COMPONENT_PRE_TEST_ACTION)
	cd $(COMPONENT_TEST_DIR) ; \
		$(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \
		bin/package test $(COMPONENT_TEST_TARGETS) \
		$(COMPONENT_TEST_ARGS)
	$(COMPONENT_POST_TEST_ACTION)
	$(COMPONENT_TEST_CLEANUP)
	$(TOUCH) [email protected]

# test the installed packages
$(BUILD_DIR)/%/.system-tested-and-compared:    $(SOURCE_DIR)/.prep
	$(RM) -rf $(COMPONENT_TEST_BUILD_DIR)
	$(MKDIR) $(COMPONENT_TEST_BUILD_DIR)
	$(COMPONENT_PRE_SYSTEM_TEST_ACTION)
	-(cd $(COMPONENT_SYSTEM_TEST_DIR) ; \
		$(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \
		bin/package test $(COMPONENT_SYSTEM_TEST_TARGETS) \
		$(COMPONENT_SYSTEM_TEST_ARGS)) \
		&> $(COMPONENT_TEST_OUTPUT)
	$(COMPONENT_POST_SYSTEM_TEST_ACTION)
	$(COMPONENT_TEST_CREATE_TRANSFORMS)
	$(COMPONENT_TEST_PERFORM_TRANSFORM)
	$(COMPONENT_TEST_COMPARE)
	$(COMPONENT_SYSTEM_TEST_CLEANUP)
	$(TOUCH) [email protected]

$(BUILD_DIR)/%/.system-tested:    $(SOURCE_DIR)/.prep
	$(COMPONENT_PRE_SYSTEM_TEST_ACTION)
	cd $(COMPONENT_SYSTEM_TEST_DIR) ; \
		$(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \
		bin/package test $(COMPONENT_SYSTEM_TEST_TARGETS) \
		$(COMPONENT_SYSTEM_TEST_ARGS)
	$(COMPONENT_POST_SYSTEM_TEST_ACTION)
	$(COMPONENT_SYSTEM_TEST_CLEANUP)
	$(TOUCH) [email protected]

ifeq   ($(strip $(PARFAIT_BUILD)),yes)
parfait: build
else
parfait:
	$(MAKE) PARFAIT_BUILD=yes parfait
endif