make-rules/configure.mk
author Nobutomo Nakano <nobutomo.nakano@oracle.com>
Fri, 09 Dec 2011 10:08:54 -0800
branchs11-sru
changeset 2236 ea3ead94e5ea
parent 278 77b380ba9d84
child 698 7144bcdfe7dd
permissions -rw-r--r--
7080326 update zoneinfo timezones to 2011i (Samoa, Newfoundland) 7087931 update zoneinfo timezones to 2011j (Samoa) 7093560 update zoneinfo timezones to 2011k (Belarus, Palestine, Ukraine) 7099266 update zoneinfo timezones to 2011l (Fiji, Palestine) 7104499 update zoneinfo timezones to 2011m (Brazil, Ukraine) 7106892 update zoneinfo timezones to 2011n (Cuba, Fiji)
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2010, 2011, Oracle and/or its affiliates. All rights reserved.
#

#
# Rules and Macros for building opens source software that uses configure /
# GNU auto* tools to configure their build for the system they are on.  This
# uses GNU Make to build the components to take advantage of the viewpath
# support and build multiple version (32/64 bit) from a shared source.
#
# To use these rules, include ../make-rules/configure.mk in your Makefile
# and define "build", "install", and "test" targets appropriate to building
# your component.
# Ex:
#
# 	build:		$(SOURCE_DIR)/build/$(MACH32)/.built \
#	 		$(SOURCE_DIR)/build/$(MACH64)/.built
#
#	install:	$(SOURCE_DIR)/build/$(MACH32)/.installed \
#	 		$(SOURCE_DIR)/build/$(MACH64)/.installed
#
#	test:		$(SOURCE_DIR)/build/$(MACH32)/.tested \
#	 		$(SOURCE_DIR)/build/$(MACH64)/.tested
#
# Any additional pre/post configure, build, or install actions can be specified
# in your make file by setting them in on of the following macros:
#	COMPONENT_PRE_CONFIGURE_ACTION, COMPONENT_POST_CONFIGURE_ACTION
#	COMPONENT_PRE_BUILD_ACTION, COMPONENT_POST_BUILD_ACTION
#	COMPONENT_PRE_INSTALL_ACTION, COMPONENT_POST_INSTALL_ACTION
#	COMPONENT_PRE_TEST_ACTION, COMPONENT_POST_TEST_ACTION
#
# If component specific make targets need to be used for build or install, they
# can be specified in
#	COMPONENT_BUILD_TARGETS, COMPONENT_INSTALL_TARGETS
#	COMPONENT_TEST_TARGETS
#

CONFIGURE_PREFIX =	/usr

CONFIGURE_BINDIR.32 =	$(CONFIGURE_PREFIX)/bin
CONFIGURE_BINDIR.64 =	$(CONFIGURE_PREFIX)/bin/$(MACH64)
CONFIGURE_LIBDIR.32 =	$(CONFIGURE_PREFIX)/lib
CONFIGURE_LIBDIR.64 =	$(CONFIGURE_PREFIX)/lib/$(MACH64)
CONFIGURE_SBINDIR.32 =	$(CONFIGURE_PREFIX)/sbin
CONFIGURE_SBINDIR.64 =	$(CONFIGURE_PREFIX)/sbin/$(MACH64)
CONFIGURE_MANDIR =	$(CONFIGURE_PREFIX)/share/man
CONFIGURE_LOCALEDIR =	$(CONFIGURE_PREFIX)/share/locale
# all texinfo documentation seems to go to /usr/share/info no matter what
CONFIGURE_INFODIR =	/usr/share/info
CONFIGURE_INCLUDEDIR =	/usr/include

CONFIGURE_ENV = CONFIG_SHELL="$(CONFIG_SHELL)"

CONFIGURE_DEFAULT_DIRS?=yes

CONFIGURE_OPTIONS += CC="$(CC)"
CONFIGURE_OPTIONS += CXX="$(CXX)"
CONFIGURE_OPTIONS += --prefix=$(CONFIGURE_PREFIX)
ifeq ($(CONFIGURE_DEFAULT_DIRS),yes)
CONFIGURE_OPTIONS += --mandir=$(CONFIGURE_MANDIR)
CONFIGURE_OPTIONS += --bindir=$(CONFIGURE_BINDIR.$(BITS))
CONFIGURE_OPTIONS += --libdir=$(CONFIGURE_LIBDIR.$(BITS))
CONFIGURE_OPTIONS += --sbindir=$(CONFIGURE_SBINDIR.$(BITS))
endif
CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(BITS))

COMPONENT_INSTALL_ARGS +=	DESTDIR=$(PROTO_DIR)

$(BUILD_DIR_32)/.configured:	BITS=32
$(BUILD_DIR_64)/.configured:	BITS=64

CONFIGURE_ENV += $(CONFIGURE_ENV.$(BITS))

# configure the unpacked source for building 32 and 64 bit version
CONFIGURE_SCRIPT =	$(SOURCE_DIR)/configure
$(BUILD_DIR)/%/.configured:	$(SOURCE_DIR)/.prep
	($(RM) -rf $(@D) ; $(MKDIR) $(@D))
	$(COMPONENT_PRE_CONFIGURE_ACTION)
	(cd $(@D) ; $(ENV) $(CONFIGURE_ENV) $(CONFIG_SHELL) \
		$(CONFIGURE_SCRIPT) $(CONFIGURE_OPTIONS))
	$(COMPONENT_POST_CONFIGURE_ACTION)
	$(TOUCH) [email protected]

# build the configured source
$(BUILD_DIR)/%/.built:	$(BUILD_DIR)/%/.configured
	$(COMPONENT_PRE_BUILD_ACTION)
	(cd $(@D) ; $(ENV) $(COMPONENT_BUILD_ENV) \
		$(GMAKE) $(COMPONENT_BUILD_ARGS) $(COMPONENT_BUILD_TARGETS))
	$(COMPONENT_POST_BUILD_ACTION)
	$(TOUCH) [email protected]

# install the built source into a prototype area
$(BUILD_DIR)/%/.installed:	$(BUILD_DIR)/%/.built
	$(COMPONENT_PRE_INSTALL_ACTION)
	(cd $(@D) ; $(ENV) $(COMPONENT_INSTALL_ENV) $(GMAKE) \
			$(COMPONENT_INSTALL_ARGS) $(COMPONENT_INSTALL_TARGETS))
	$(COMPONENT_POST_INSTALL_ACTION)
	$(TOUCH) [email protected]

# test the built source
$(BUILD_DIR)/%/.tested:	$(BUILD_DIR)/%/.built
	$(COMPONENT_PRE_TEST_ACTION)
	(cd $(@D) ; $(ENV) $(COMPONENT_TEST_ENV) $(GMAKE) \
			$(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS))
	$(COMPONENT_POST_TEST_ACTION)
	$(TOUCH) [email protected]

clean::
	$(RM) -r $(BUILD_DIR) $(PROTO_DIR)