6926434 ib_read_bw, ib_read_lat: OFED utilities sometimes hang when using "-e" (event) flag
6996726 "rds-stress --show-perfdata" option is broken.
7003185 rds-stress man page needs cleanup
7005654 qperf: 32bit only: qperf fails in all RC/UD streaming tests
7024095 set_nodedesc.sh: heading whitespace of HCA specific desc string is ignored if '-N' not specified
7043392 OFED 1.5.3: test_verbs: 'resize CQ' test failed on tavor
7043758 OFED 1.5.3: test_verbs: core dump while during async test on tavor with snv_166
7044543 ibsysstat server process fails to get cpu info
7046730 ibstatus needs to clean up after itself
7050802 OFED 1.5.3: ib_send_bw/ib_send_lat doesn't work with '-g' option
7061241 OFED 1.5.3 ib_read_lat/ib_read_bw don't work between tavor and hermon
7087339 modify solaris changes to libmlx4 to use returned inline size from hermon driver
7090343 solaris_set_nodedesc: the -N option does not work
7091277 /usr/man/man3/ibnd_debug.3 and ibnd_destroy_fabric.3 refer to non-existence ibnd_discover_fabric.3
7091649 OFED 1.5.3: ibdiagnet: "-vlr -r" shows file open failure messages on Solaris
7093499 ib_rdma_lat, ib_read_lat, ib_write_lat and other IB verb latency tools should use gethrtime
7095000 mem leak in libibvers ibv_read_sysfs_file()
7095879 resize cq in libmlx4 incorrect
7095943 rdma_lat & rdma_bw core dump on non ib system
7099692 Add man pages for OFUV perftest utilities
7108873 definitions in sol_uverbs_ioctl.h & sol_umad_ioctl.h are duplicated in solaris_compatibility.c
7119924 ibportstate: operations enable, disable, and reset should only be allowed on switch ports
7120891 ibv_devinfo should report a valid active_mtu instead of 'Unknown'
7141996 sol_uverbs should provide ioctl calls to get GIDs and PKEYs for libibverbs (userland changes)
7144445 setnodedesc.sh -v white space issue
7146479 qperf --cpu_affinity doesn't match with solaris cpu no.
7146482 qperf -cm1 sometimes failed with "rdma_listen failed" message
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2010, 2012, Oracle and/or its affiliates. All rights reserved.
#
#
# Rules and Macros for building opens source software that uses configure /
# GNU auto* tools to configure their build for the system they are on. This
# uses GNU Make to build the components to take advantage of the viewpath
# support and build multiple version (32/64 bit) from a shared source.
#
# To use these rules, include ../make-rules/configure.mk in your Makefile
# and define "build", "install", and "test" targets appropriate to building
# your component.
# Ex:
#
# build: $(SOURCE_DIR)/build/$(MACH32)/.built \
# $(SOURCE_DIR)/build/$(MACH64)/.built
#
# install: $(SOURCE_DIR)/build/$(MACH32)/.installed \
# $(SOURCE_DIR)/build/$(MACH64)/.installed
#
# test: $(SOURCE_DIR)/build/$(MACH32)/.tested \
# $(SOURCE_DIR)/build/$(MACH64)/.tested
#
# Any additional pre/post configure, build, or install actions can be specified
# in your make file by setting them in on of the following macros:
# COMPONENT_PRE_CONFIGURE_ACTION, COMPONENT_POST_CONFIGURE_ACTION
# COMPONENT_PRE_BUILD_ACTION, COMPONENT_POST_BUILD_ACTION
# COMPONENT_PRE_INSTALL_ACTION, COMPONENT_POST_INSTALL_ACTION
# COMPONENT_PRE_TEST_ACTION, COMPONENT_POST_TEST_ACTION
#
# If component specific make targets need to be used for build or install, they
# can be specified in
# COMPONENT_BUILD_TARGETS, COMPONENT_INSTALL_TARGETS
# COMPONENT_TEST_TARGETS
#
CONFIGURE_PREFIX = /usr
CONFIGURE_BINDIR.32 = $(CONFIGURE_PREFIX)/bin
CONFIGURE_BINDIR.64 = $(CONFIGURE_PREFIX)/bin/$(MACH64)
CONFIGURE_LIBDIR.32 = $(CONFIGURE_PREFIX)/lib
CONFIGURE_LIBDIR.64 = $(CONFIGURE_PREFIX)/lib/$(MACH64)
CONFIGURE_SBINDIR.32 = $(CONFIGURE_PREFIX)/sbin
CONFIGURE_SBINDIR.64 = $(CONFIGURE_PREFIX)/sbin/$(MACH64)
CONFIGURE_MANDIR = $(CONFIGURE_PREFIX)/share/man
CONFIGURE_LOCALEDIR = $(CONFIGURE_PREFIX)/share/locale
# all texinfo documentation seems to go to /usr/share/info no matter what
CONFIGURE_INFODIR = /usr/share/info
CONFIGURE_INCLUDEDIR = /usr/include
CONFIGURE_ENV = CONFIG_SHELL="$(CONFIG_SHELL)"
CONFIGURE_DEFAULT_DIRS?=yes
CONFIGURE_OPTIONS += CC="$(CC)"
CONFIGURE_OPTIONS += CXX="$(CXX)"
CONFIGURE_OPTIONS += --prefix=$(CONFIGURE_PREFIX)
ifeq ($(CONFIGURE_DEFAULT_DIRS),yes)
CONFIGURE_OPTIONS += --mandir=$(CONFIGURE_MANDIR)
CONFIGURE_OPTIONS += --bindir=$(CONFIGURE_BINDIR.$(BITS))
CONFIGURE_OPTIONS += --libdir=$(CONFIGURE_LIBDIR.$(BITS))
CONFIGURE_OPTIONS += --sbindir=$(CONFIGURE_SBINDIR.$(BITS))
endif
CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(BITS))
COMPONENT_INSTALL_ARGS += DESTDIR=$(PROTO_DIR)
$(BUILD_DIR_32)/.configured: BITS=32
$(BUILD_DIR_64)/.configured: BITS=64
CONFIGURE_ENV += $(CONFIGURE_ENV.$(BITS))
# temporarily work around some issues
CONFIGURE_ENV += "ac_cv_func_realloc_0_nonnull=yes"
COMPONENT_BUILD_ENV += "ac_cv_func_realloc_0_nonnull=yes"
# configure the unpacked source for building 32 and 64 bit version
CONFIGURE_SCRIPT = $(SOURCE_DIR)/configure
$(BUILD_DIR)/%/.configured: $(SOURCE_DIR)/.prep
($(RM) -rf $(@D) ; $(MKDIR) $(@D))
$(COMPONENT_PRE_CONFIGURE_ACTION)
(cd $(@D) ; $(ENV) $(CONFIGURE_ENV) $(CONFIG_SHELL) \
$(CONFIGURE_SCRIPT) $(CONFIGURE_OPTIONS))
$(COMPONENT_POST_CONFIGURE_ACTION)
$(TOUCH) $@
# build the configured source
$(BUILD_DIR)/%/.built: $(BUILD_DIR)/%/.configured
$(COMPONENT_PRE_BUILD_ACTION)
(cd $(@D) ; $(ENV) $(COMPONENT_BUILD_ENV) \
$(GMAKE) $(COMPONENT_BUILD_ARGS) $(COMPONENT_BUILD_TARGETS))
$(COMPONENT_POST_BUILD_ACTION)
$(TOUCH) $@
# install the built source into a prototype area
$(BUILD_DIR)/%/.installed: $(BUILD_DIR)/%/.built
$(COMPONENT_PRE_INSTALL_ACTION)
(cd $(@D) ; $(ENV) $(COMPONENT_INSTALL_ENV) $(GMAKE) \
$(COMPONENT_INSTALL_ARGS) $(COMPONENT_INSTALL_TARGETS))
$(COMPONENT_POST_INSTALL_ACTION)
$(TOUCH) $@
# test the built source
$(BUILD_DIR)/%/.tested: $(BUILD_DIR)/%/.built
$(COMPONENT_PRE_TEST_ACTION)
(cd $(@D) ; $(ENV) $(COMPONENT_TEST_ENV) $(GMAKE) \
$(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS))
$(COMPONENT_POST_TEST_ACTION)
$(TOUCH) $@
clean::
$(RM) -r $(BUILD_DIR) $(PROTO_DIR)