15705382 SUNBT7031289 Update ntp to 4.2.7
16756358 Enable ASLR for NTP
14932716 SUNBT4031742 /etc/inet/ntp.client should include broadcastclient
15722546 SUNBT7055402 ipmp cause reachability issues for ntp4 daemon
15727250 SUNBT7064417 ntpd errors on some new system
15751447 SUNBT7106031 Solaris 11 restrict noserve doesn't work right
15785388 SUNBT7161189 ntpd starts on S 11 in a forked status with error "ntpd indicates n
15813516 SUNBT7195495 ntpd crashed with SIGFPE (Arithmetic Exception)
16090481 ntp version 4 daemon crashes in isc_interfaceiter_first()
16741686 "ntpd" v4.2.5 cannot accept/query interface names longer than 15 characters.
16978017 ntpd debug in Solaris 11.1does not write any output
17000189 NTP needs to increase its file descriptor limit.
17000601 ntpd should log a message when it exits abnormally.
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2009, 2013, Oracle and/or its affiliates. All rights reserved.
# If you do not want to configure your client to listen for multicast, comment
# this line out. This should only be used for casual time keeping, like keeping
# a desktop system in sync.
multicastclient 224.0.1.1
# You can also use broadcast mode. Again, only use for casual timekeeping.
broadcastclient
# The default is to require authentication. Without authentication you do not
# have any control over what servers your system is getting its time from.
# It is possible for another system to target your system to change the time.
# However for casual time keeping and ease of administration authentication
# may not be necessary. Using authentication is recommended.
disable auth
# To configure NTP servers, replace the server_name with either the IP address
# or hostname of the server you wish to use. If you just want to keep the time
# in a causual way, one server may be enough for you. If you wish to keep it
# to a more accurate level, 3 or more is recommended. Do not choose 2, because
# 2 servers is an unstable configuration. By the same token 3 is only acceptable
# if all are always available, since when a single one reboots or otherwise
# becomes unavailable, you have just 2. The iburst keyword specifies that
# multiple packets be sent at start-up to allow the system to more quickly
# get the correct time at boot.
#
# For a list of Internet NTP servers see
# http://support.ntp.org/bin/view/Servers/WebHome
# If you use this list, be sure to read, understand and abide by the rules
# each server has published for accessing themselves.
#
# There is also a DNS round-robin pool of public access NTP servers. The
# instructions for accessing these are at http://www.pool.ntp.org
# Please consider adding your own servers to the pool if possible.
#
# Many ISP's also provide NTP servers for use by their customers.
# server server_name1 iburst
# server server_name2 iburst
# server server_name3 iburst
# Always configure the drift file. It can take days for ntpd to completely
# stabilize and without the drift file, it has to start over on a reboot
# of if ntpd restarts.
driftfile /var/ntp/ntp.drift
# It is always wise to configure at least the loopstats and peerstats files.
# Otherwise when ntpd does something you don't expect there is no way to
# find out why.
statsdir /var/ntp/ntpstats/
filegen peerstats file peerstats type day enable
filegen loopstats file loopstats type day enable
# To track the events regarding the system clock, the protostats file can be useful
# as well.
#filegen protostats file protostats type day enable
# To see the current state of the crypto authentication protocols, enable the
# cryptostats file.
#filegen cryptostats file cryptostats type day enable
# The clockstats files are only useful if a hardware reference clock is
# configured. See the /etc/inet/ntp.server file for more information about
# that.
#filegen clockstats file clockstats type day enable
# The sysstats and rawstats output might be useful in debugging, but are
# not important otherwise.
#filegen sysstats file sysstats type day enable
#filegen rawstats file rawstats type day enable
# There are several types on authentication supported by NTP. The easiest
# to use is a set of passwords, called "keys". They should be stored
# the /etc/inet/ntp.keys file. Each key in the ntp.keys file can be
# assigned to certain types of trust levels. See ntpd(1m) for more
# information on setting up key.
#keys /etc/inet/ntp.keys
#trustedkey 1
#requestkey 1
#controlkey 1
#
# To configure leap seconds processing, download the latest NIST leap seconds
# file to /etc/inet, and then create a symbolic link to it from the ntp.leap
# file. Without this file, NTP will still be able to accept leap announcements
# from its upstream sources. If this file exists and is less than 6 months old
# then the contents of this file will take precedence over the upstream servers.
# The latest leap seconds file is always available at ftp://time.nist.gov/pub
#leapfile /etc/inet/ntp.leap