# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright (c) 2010, 2016, Oracle and/or its affiliates. All rights reserved. # # # Rules and Macros for building opens source software that uses configure / # GNU auto* tools to configure their build for the system they are on. This # uses GNU Make to build the components to take advantage of the viewpath # support and build multiple version (32/64 bit) from a shared source. # # To use these rules, include $(WS_MAKE_RULES)/configure.mk in your Makefile # and define "build", "install", and "test" targets appropriate to building # your component. # Ex: # # build: $(SOURCE_DIR)/build/$(MACH32)/.built \ # $(SOURCE_DIR)/build/$(MACH64)/.built # # install: $(SOURCE_DIR)/build/$(MACH32)/.installed \ # $(SOURCE_DIR)/build/$(MACH64)/.installed # # test: $(SOURCE_DIR)/build/$(MACH32)/.tested \ # $(SOURCE_DIR)/build/$(MACH64)/.tested # # Any additional pre/post configure, build, or install actions can be specified # in your make file by setting them in on of the following macros: # COMPONENT_PRE_CONFIGURE_ACTION, COMPONENT_POST_CONFIGURE_ACTION # COMPONENT_PRE_BUILD_ACTION, COMPONENT_POST_BUILD_ACTION # COMPONENT_PRE_INSTALL_ACTION, COMPONENT_POST_INSTALL_ACTION # COMPONENT_PRE_TEST_ACTION, COMPONENT_POST_TEST_ACTION # # If component specific make targets need to be used for build or install, they # can be specified in # COMPONENT_BUILD_TARGETS, COMPONENT_INSTALL_TARGETS # COMPONENT_TEST_TARGETS # CONFIGURE_PREFIX ?= /usr # If the component prefers 64-bit binaries, then ensure builds deliver 64-bit # binaries to the standard directories and 32-bit binaries to the non-standard # location. This allows simplification of package manifests and makes it # easier to deliver the 64-bit binaries as the default. ifeq ($(strip $(PREFERRED_BITS)),64) CONFIGURE_BINDIR.32 ?= $(CONFIGURE_PREFIX)/bin/$(MACH32) CONFIGURE_SBINDIR.32 ?= $(CONFIGURE_PREFIX)/sbin/$(MACH32) CONFIGURE_BINDIR.64 ?= $(CONFIGURE_PREFIX)/bin CONFIGURE_SBINDIR.64 ?= $(CONFIGURE_PREFIX)/sbin else CONFIGURE_BINDIR.32 ?= $(CONFIGURE_PREFIX)/bin CONFIGURE_SBINDIR.32 ?= $(CONFIGURE_PREFIX)/sbin CONFIGURE_BINDIR.64 ?= $(CONFIGURE_PREFIX)/bin/$(MACH64) CONFIGURE_SBINDIR.64 ?= $(CONFIGURE_PREFIX)/sbin/$(MACH64) endif # Regardless of PREFERRED_BITS, 64-bit libraries should always be delivered to # the appropriate subdirectory by default. CONFIGURE_LIBDIR.32 ?= $(CONFIGURE_PREFIX)/lib CONFIGURE_LIBDIR.64 ?= $(CONFIGURE_PREFIX)/lib/$(MACH64) CONFIGURE_MANDIR ?= $(CONFIGURE_PREFIX)/share/man CONFIGURE_LOCALEDIR ?= $(CONFIGURE_PREFIX)/share/locale # all texinfo documentation seems to go to /usr/share/info no matter what CONFIGURE_INFODIR ?= /usr/share/info CONFIGURE_INCLUDEDIR ?= /usr/include CONFIGURE_ENV = CONFIG_SHELL="$(CONFIG_SHELL)" CONFIGURE_DEFAULT_DIRS?=yes CONFIGURE_ENV += PKG_CONFIG_PATH="$(PKG_CONFIG_PATH)" CONFIGURE_ENV += CC="$(CC)" CONFIGURE_ENV += CXX="$(CXX)" # Ensure that 64-bit versions of *-config scripts are preferred. CONFIGURE_ENV.64 += PATH="$(USRBIN.64):$(PATH)" # A full build must be performed if any new options are added here as not all # components use autoconf-based configure scripts and some have patched theirs # to reject "unknown" options (which may be supported by newer versions of # autoconf's configure). CONFIGURE_OPTIONS += --prefix=$(CONFIGURE_PREFIX) ifeq ($(CONFIGURE_DEFAULT_DIRS),yes) CONFIGURE_OPTIONS += --mandir=$(CONFIGURE_MANDIR) CONFIGURE_OPTIONS += --bindir=$(CONFIGURE_BINDIR.$(BITS)) CONFIGURE_OPTIONS += --sbindir=$(CONFIGURE_SBINDIR.$(BITS)) CONFIGURE_OPTIONS += --libdir=$(CONFIGURE_LIBDIR.$(BITS)) endif CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(BITS)) CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(MACH)) CONFIGURE_OPTIONS += $(CONFIGURE_OPTIONS.$(MACH).$(BITS)) COMPONENT_INSTALL_ARGS += DESTDIR=$(PROTO_DIR) $(BUILD_DIR_32)/.configured: BITS=32 $(BUILD_DIR_64)/.configured: BITS=64 CONFIGURE_ENV += $(CONFIGURE_ENV.$(BITS)) ifeq ($(strip $(PARFAIT_BUILD)),yes) # parfait creates '*.bc' files which can confuse configure's # object/exe extension detection. which we really don't need it # to do anyway, so we'll just tell it what they are. CONFIGURE_ENV += ac_cv_objext=o CONFIGURE_ENV += ac_cv_exeext="" # this is fixed in the clang compiler but we can't use it yet CONFIGURE_ENV += ac_cv_header_stdbool_h=yes endif # This MUST be set in the build environment so that if pkg-config is executed # during the build process, the correct header files and libraries will be # picked up. In the Linux world, a system is generally only 32-bit or 64-bit # at one time so this isn't an issue that various auto* files account for (they # don't set PKG_CONFIG_PATH when executing pkg-config even if it was specified # during ./configure). COMPONENT_BUILD_ENV += PKG_CONFIG_PATH="$(PKG_CONFIG_PATH)" # CC_FOR_BUILD and CXX_FOR_BUILD are used by autoconf to set the compiler and # required flags for generating native executables and is typically used for # host detection and other tests during the autoconf process. Explicitly # specifying the target bits ensures that autoconf reliably detects 32-bit and # 64-bit builds. CC_FOR_BUILD ?= "$(CC) $(CC_BITS)" ifneq ($(strip $(CC_FOR_BUILD)),) CONFIGURE_ENV += CC_FOR_BUILD=$(CC_FOR_BUILD) endif CXX_FOR_BUILD ?= "$(CXX) $(CC_BITS)" ifneq ($(strip $(CXX_FOR_BUILD)),) CONFIGURE_ENV += CXX_FOR_BUILD=$(CXX_FOR_BUILD) endif # Similar idea for CPP as above; there's a common macro found in lib-prefix.m4 # for autoconf that detects a 64-bit host on Solaris by using CPP. As such, by # default, we need to explicitly specify the target bits to ensure that # autoconf reliably detects 32-bit and 64-bit builds. CONFIGURE_CPPFLAGS ?= $(CC_BITS) ifneq ($(strip $(CONFIGURE_CPPFLAGS)),) CONFIGURE_ENV += CPPFLAGS="$(strip $(CONFIGURE_CPPFLAGS) $(CPPFLAGS))" endif # temporarily work around some issues CONFIGURE_ENV += "ac_cv_func_realloc_0_nonnull=yes" CONFIGURE_ENV += "NM=/usr/gnu/bin/nm" COMPONENT_BUILD_ENV += "ac_cv_func_realloc_0_nonnull=yes" # 23200148 undo this once 23169155 Move developer/gnome/gettext to Userland CONFIGURE_ENV += INTLTOOL_PERL="$(PERL)" COMPONENT_BUILD_ENV += INTLTOOL_PERL="$(PERL)" # configure the unpacked source for building 32 and 64 bit version CONFIGURE_SCRIPT ?= $(SOURCE_DIR)/configure $(BUILD_DIR)/%/.configured: $(SOURCE_DIR)/.prep ($(RM) -rf $(@D) ; $(MKDIR) $(@D)) $(COMPONENT_PRE_CONFIGURE_ACTION) (cd $(@D) ; $(ENV) $(CONFIGURE_ENV) $(CONFIG_SHELL) \ $(CONFIGURE_SCRIPT) $(CONFIGURE_OPTIONS)) $(COMPONENT_POST_CONFIGURE_ACTION) $(TOUCH) $@ # build the configured source $(BUILD_DIR)/%/.built: $(BUILD_DIR)/%/.configured $(COMPONENT_PRE_BUILD_ACTION) (cd $(@D) ; $(ENV) $(COMPONENT_BUILD_ENV) \ $(GMAKE) $(COMPONENT_BUILD_ARGS) $(COMPONENT_BUILD_TARGETS)) $(COMPONENT_POST_BUILD_ACTION) ifeq ($(strip $(PARFAIT_BUILD)),yes) -$(PARFAIT) $(@D) endif $(TOUCH) $@ # install the built source into a prototype area $(BUILD_DIR)/%/.installed: $(BUILD_DIR)/%/.built $(COMPONENT_PRE_INSTALL_ACTION) (cd $(@D) ; $(ENV) $(COMPONENT_INSTALL_ENV) $(GMAKE) \ $(COMPONENT_INSTALL_ARGS) $(COMPONENT_INSTALL_TARGETS)) $(COMPONENT_POST_INSTALL_ACTION) $(TOUCH) $@ # Test the built source. If the output file shows up in the environment or # arguments, don't redirect stdout/stderr to it. $(BUILD_DIR)/%/.tested-and-compared: $(BUILD_DIR)/%/.built $(RM) -rf $(COMPONENT_TEST_BUILD_DIR) $(MKDIR) $(COMPONENT_TEST_BUILD_DIR) $(COMPONENT_PRE_TEST_ACTION) -(cd $(COMPONENT_TEST_DIR) ; \ $(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \ $(COMPONENT_TEST_CMD) \ $(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS)) \ $(if $(findstring $(COMPONENT_TEST_OUTPUT),$(COMPONENT_TEST_ENV)$(COMPONENT_TEST_ARGS)),,&> $(COMPONENT_TEST_OUTPUT)) $(COMPONENT_POST_TEST_ACTION) $(COMPONENT_TEST_CREATE_TRANSFORMS) $(COMPONENT_TEST_PERFORM_TRANSFORM) $(COMPONENT_TEST_COMPARE) $(COMPONENT_TEST_CLEANUP) $(TOUCH) $@ $(BUILD_DIR)/%/.tested: $(BUILD_DIR)/%/.built $(COMPONENT_PRE_TEST_ACTION) (cd $(COMPONENT_TEST_DIR) ; \ $(COMPONENT_TEST_ENV_CMD) $(COMPONENT_TEST_ENV) \ $(COMPONENT_TEST_CMD) \ $(COMPONENT_TEST_ARGS) $(COMPONENT_TEST_TARGETS)) $(COMPONENT_POST_TEST_ACTION) $(COMPONENT_TEST_CLEANUP) $(TOUCH) $@ # Test the installed packages. If the output file shows up in the environment # or arguments, don't redirect stdout/stderr to it. $(BUILD_DIR)/%/.system-tested-and-compared: $(SOURCE_DIR)/.prep $(RM) -rf $(COMPONENT_TEST_BUILD_DIR) $(MKDIR) $(COMPONENT_TEST_BUILD_DIR) $(COMPONENT_PRE_SYSTEM_TEST_ACTION) -(cd $(COMPONENT_SYSTEM_TEST_DIR) ; \ $(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \ $(COMPONENT_SYSTEM_TEST_CMD) \ $(COMPONENT_SYSTEM_TEST_ARGS) $(COMPONENT_SYSTEM_TEST_TARGETS)) \ $(if $(findstring $(COMPONENT_TEST_OUTPUT),$(COMPONENT_SYSTEM_TEST_ENV)$(COMPONENT_SYSTEM_TEST_ARGS)),,&> $(COMPONENT_TEST_OUTPUT)) $(COMPONENT_POST_SYSTEM_TEST_ACTION) $(COMPONENT_TEST_CREATE_TRANSFORMS) $(COMPONENT_TEST_PERFORM_TRANSFORM) $(COMPONENT_TEST_COMPARE) $(COMPONENT_SYSTEM_TEST_CLEANUP) $(TOUCH) $@ $(BUILD_DIR)/%/.system-tested: $(SOURCE_DIR)/.prep $(COMPONENT_PRE_SYSTEM_TEST_ACTION) (cd $(COMPONENT_SYSTEM_TEST_DIR) ; \ $(COMPONENT_SYSTEM_TEST_ENV_CMD) $(COMPONENT_SYSTEM_TEST_ENV) \ $(COMPONENT_SYSTEM_TEST_CMD) \ $(COMPONENT_SYSTEM_TEST_ARGS) $(COMPONENT_SYSTEM_TEST_TARGETS)) $(COMPONENT_POST_SYSTEM_TEST_ACTION) $(COMPONENT_SYSTEM_TEST_CLEANUP) $(TOUCH) $@ # If BUILD_STYLE is set, provide a default configure target. ifeq ($(strip $(BUILD_STYLE)),configure) configure: $(CONFIGURE_$(MK_BITS)) endif ifeq ($(strip $(PARFAIT_BUILD)),yes) parfait: build else parfait: $(MAKE) PARFAIT_BUILD=yes parfait endif REQUIRED_PACKAGES += developer/build/autoconf REQUIRED_PACKAGES += developer/build/automake REQUIRED_PACKAGES += developer/build/gnu-make REQUIRED_PACKAGES += developer/build/libtool REQUIRED_PACKAGES += developer/build/pkg-config REQUIRED_PACKAGES += developer/macro/gnu-m4 REQUIRED_PACKAGES += file/gnu-coreutils REQUIRED_PACKAGES += library/libtool/libltdl