--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/usr/src/cmd/lp/terminfo/ibm.ti	Tue Jun 14 00:00:00 2005 -0700
@@ -0,0 +1,353 @@
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License, Version 1.0 only
+# (the "License").  You may not use this file except in compliance
+# with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+#	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T
+#	  All Rights Reserved
+
+
+#ident	"%Z%%M%	%I%	%E% SMI"	/* SVr4.0 1.2	*/
+
+######################################################################
+#
+# Generic entries for the various IBM printers and emulations.
+#
+
+###################################
+#
+# IBM Graphics
+#
+
+#
+# Basic capabilities:
+#
+Gibmg+basic,
+
+	cols#80,
+	lines#66,
+	it#8,
+
+	cpix,
+	orc#1,
+	orhi#10,
+	orl#12,
+	orvi#72,
+
+	cr=^M,
+	ff=^L,
+	ht=^I,
+	cud1=^J,
+	cuf1=\s,
+
+	cpi=%?%p1%{10}%=%t^R%e%p1%{16}%=%p1%{17}%=%O%t^O%;,
+	cvr=%?%p1%{0}%>%p1%{256}%<%&%t\EA%p1%c\E2%;,
+
+	is1=^X,
+	is2=^R\EA\014\E2\EF\EH\EW0\ET\E-0\E7\EO\ECB,
+
+	csnm=%?%p1%{0}%=%tcharacter_set_1%e%p1%{1}%=%tcharacter_set_2%;,
+	scs=%?%p1%{0}%=%t\E7%e%p1%{2}%=%t\E6%;,
+
+	smso=\EE,
+	rmso=\EF,
+	smul=\E-1,
+	rmul=\E-0,
+	bold=\EG,
+	smacs=\E6,
+	rmacs=\E7,
+	sshm=\EE,
+	rshm=\EF,
+	ssubm=\ES1,
+	rsubm=\ET,
+	ssupm=\ES0,
+	rsupm=\ET,
+	swidm=\EW1,
+	rwidm=\EW0,
+	sgr0=\EF\E-0\EH\E7\ET\EW0,
+	sgr=%?%p1%t\EE%e\EF%;%?%p2%t\E-1%e\E-0%;%?%p6%t\EG%e\EH%;%?%p9%t\E6%e\E7%;,
+	sdrfq=\EH,
+	snlq=\EG,
+
+#   slines=  u9 used for svr3.2
+	u9=%?%p1%{0}%>%p1%{128}%<%&%t\EC%p1%c%;,
+	slines=%?%p1%{0}%>%p1%{128}%<%&%t\EC%p1%c%;,
+
+#
+# Graphics capabilities (low resolution, 9-pin):
+#
+Gibmg+low,
+
+	npins#8,
+	spinv#72,
+	spinh#60,
+
+	porder=1\,2\,3\,4\,5\,6\,7\,8;0,
+
+	sbim=\EK%p1%{256}%m%c%p1%{256}%/%c,
+
+        bitwin#1,
+	u1=1,
+        bitype#1,
+	u2=1,
+
+#   defbi=
+#	Set the line spacing to 8/72 inch (9 lines per inch)
+#	to get 72 dots per inch vertically (9 lines/inch * 8 pins/line).
+#	Set the character spacing to pica (1/10 inch or 10 characters
+#	per inch); at 60 dots per inch horizontally this means 6
+#	dots per character.
+#	The IBM Graphics doesn't have parameterized motion,
+#	so we simulate it with linefeeds and spaces.
+#	Assume we never need to move across more than 63 colums
+#	or down more than 31 lines. 
+#	THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although
+#	maybe not in the first column.)
+	u6=%?%p5%{1}%=%t\EA\010\E2^R%p2%{8}%/%Py%?%gy%{15}%>%t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n%gy%{16}%-%Py%;%?%gy%{7}%>%t\n\n\n\n\n\n\n\n%gy%{8}%-%Py%;%?%gy%{3}%>%t\n\n\n\n%gy%{4}%-%Py%;%?%gy%{1}%>%t\n\n%gy%{2}%-%Py%;%?%gy%{0}%>%t\n%;\r%p1%{6}%/%Px%?%gx%{31}%>%t                                %gx%{32}%-%Px%;%?%gx%{15}%>%t                %gx%{16}%-%Px%;%?%gx%{7}%>%t        %gx%{8}%-%Px%;%?%gx%{3}%>%t    %gx%{4}%-%Px%;%?%gx%{1}%>%t  %gx%{2}%-%Px%;%?%gx%{0}%>%t %;%;,
+	defbi=%?%p5%{1}%=%t\EA\010\E2^R%p2%{8}%/%Py%?%gy%{15}%>%t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n%gy%{16}%-%Py%;%?%gy%{7}%>%t\n\n\n\n\n\n\n\n%gy%{8}%-%Py%;%?%gy%{3}%>%t\n\n\n\n%gy%{4}%-%Py%;%?%gy%{1}%>%t\n\n%gy%{2}%-%Py%;%?%gy%{0}%>%t\n%;\r%p1%{6}%/%Px%?%gx%{31}%>%t                                %gx%{32}%-%Px%;%?%gx%{15}%>%t                %gx%{16}%-%Px%;%?%gx%{7}%>%t        %gx%{8}%-%Px%;%?%gx%{3}%>%t    %gx%{4}%-%Px%;%?%gx%{1}%>%t  %gx%{2}%-%Px%;%?%gx%{0}%>%t %;%;,
+
+#   endbi=
+	u7=\EA\014\E2,
+	endbi=\EA\014\E2,
+
+#   binel=
+	u5=\n\r%p1%{6}%/%Px%?%gx%{31}%>%t                                %gx%{32}%-%Px%;%?%gx%{15}%>%t                %gx%{16}%-%Px%;%?%gx%{7}%>%t        %gx%{8}%-%Px%;%?%gx%{3}%>%t    %gx%{4}%-%Px%;%?%gx%{1}%>%t  %gx%{2}%-%Px%;%?%gx%{0}%>%t %;,
+	binel=\n\r%p1%{6}%/%Px%?%gx%{31}%>%t                                %gx%{32}%-%Px%;%?%gx%{15}%>%t                %gx%{16}%-%Px%;%?%gx%{7}%>%t        %gx%{8}%-%Px%;%?%gx%{3}%>%t    %gx%{4}%-%Px%;%?%gx%{1}%>%t  %gx%{2}%-%Px%;%?%gx%{0}%>%t %;,
+
+#   bicr=
+	u3=\r%p1%{6}%/%Px%?%gx%{31}%>%t                                %gx%{32}%-%Px%;%?%gx%{15}%>%t                %gx%{16}%-%Px%;%?%gx%{7}%>%t        %gx%{8}%-%Px%;%?%gx%{3}%>%t    %gx%{4}%-%Px%;%?%gx%{1}%>%t  %gx%{2}%-%Px%;%?%gx%{0}%>%t %;,
+	bicr=\r%p1%{6}%/%Px%?%gx%{31}%>%t                                %gx%{32}%-%Px%;%?%gx%{15}%>%t                %gx%{16}%-%Px%;%?%gx%{7}%>%t        %gx%{8}%-%Px%;%?%gx%{3}%>%t    %gx%{4}%-%Px%;%?%gx%{1}%>%t  %gx%{2}%-%Px%;%?%gx%{0}%>%t %;,
+
+###################################
+#
+# IBM Color 
+#
+
+#
+# Basic capabilities:
+#
+Gibmc+basic,
+
+	cub1=\b,
+
+	is1=^Q^X,
+	is2=^R\EA\014\E2\EF\EH\EW0\ET\E-0\E7\EO\ER\E50\EM0\EX^A\210\Eb\ECB,
+
+	cvr=%?%p1%{0}%>%p1%{256}%<%&%t\E3%p1%c%;,
+
+	smglp=\EX%p1%{1}%+%c%p2%{1}%+%c,
+
+	use=Gibmg+basic,
+
+#
+# Graphics capabilities (low resolution, 9-pin, 5:6 aspect ratio):
+#
+Gibmc+low+5x6,
+
+	spinv#84,
+	spinh#70,
+
+#   defbi=
+#	Set 5:6 aspect ratio.
+#	Set the line spacing to 7/72 inch (10.29 lines per inch)
+#	to get approximately 84 dots per inch vertically
+#	(10.29 lines/inch * 8 pins/line equals 82.28 dots per inch).
+#	Set the character spacing to pica (1/10 inch or 10 characters
+#	per inch); at 70 dots per inch horizontally this means 7
+#	dots per character.
+#	Set vertical and horizontal tab stops at the upper left corner
+#	of the image, then tab to the upper left corner.
+#	Note: $<> is a true null (only works with special Curses routine).
+#	THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although
+#	maybe not in the first column.)
+	u6=%?%p5%{1}%=%t\En^B\E1^R\EB%p2%{8}%/%c$<>\ED%p1%{7}%/%c$<>\013\r\t%;,
+	defbi=%?%p5%{1}%=%t\En^B\E1^R\EB%p2%{8}%/%c$<>\ED%p1%{7}%/%c$<>\013\r\t%;,
+
+#   binel=
+	u5=\n\r\t,
+	binel=\n\r\t,
+
+#   bicr=
+	u3=\r\t,
+	bicr=\r\t,
+
+	use=Gibmg+low,
+
+#
+# Graphics capabilities (low resolution, 9-pin, 1:1 aspect ratio):
+#
+Gibmc+low+1x1,
+
+	spinh#84,
+
+#   defbi=
+#	Set 1:1 aspect ratio.
+#	Set the line spacing to 7/72 inch (10.29 lines per inch)
+#	to get approximately 84 dots per inch vertically
+#	(10.29 lines/inch * 8 pins/line equals 82.28 dots per inch).
+#	Set the character spacing to pica (1/10 inch or 10 characters
+#	per inch); at 84 dots per inch horizontally this means 8.4
+#	dots per character.
+#	Set vertical and horizontal tab stops at the upper left corner
+#	of the image, then tab to the upper left corner.
+#	Note: $<> is a true null (only works with special Curses routine).
+#	THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although
+#	maybe not in the first column.)
+	u6=%?%p5%{1}%=%t\En^A\E1^R\EB%p2%{8}%/%c$<>\ED%p1%{10}%*%{84}%/%c$<>\013\r\t%;,
+	defbi=%?%p5%{1}%=%t\En^A\E1^R\EB%p2%{8}%/%c$<>\ED%p1%{10}%*%{84}%/%c$<>\013\r\t%;,
+
+	use=Gibmc+low+5x6,
+
+#
+# Color capability:
+#
+Gibmc+color,
+
+	colors#3,
+
+#   setcolor=
+	initc=%?%p1%{0}%=%t\Eb%;%?%p1%{1}%=%t\Ec%;%?%p1%{2}%=%t\Em%;%?%p1%{3}%=%t\Ey%;,
+
+#   colornm=
+	u8=%?%p1%{0}%=%tblack%;%?%p1%{1}%=%tcyan%;%?%p1%{2}%=%tmagenta%;%?%p1%{3}%=%tyellow%;%?%p1%{4}%=%torange=yellow+magenta%;%?%p1%{5}%=%tgreen=yellow+cyan%;%?%p1%{6}%=%tviolet=magenta+cyan%;%?%p1%{7}%=%tbrown=magenta+black%;,
+	colornm=%?%p1%{0}%=%tblack%;%?%p1%{1}%=%tcyan%;%?%p1%{2}%=%tmagenta%;%?%p1%{3}%=%tyellow%;%?%p1%{4}%=%torange=yellow+magenta%;%?%p1%{5}%=%tgreen=yellow+cyan%;%?%p1%{6}%=%tviolet=magenta+cyan%;%?%p1%{7}%=%tbrown=magenta+black%;,
+
+###################################
+#
+# IBM Proprinter XL:
+#
+#	This printer appears to be a superset of the IBM Graphics
+#	and IBM Color printers, with a 24-wire printhead. The entry
+#	below uses the full capabilities of the superset and printhead.
+#	The printer has an Alternate Graphics Mode (AGM) that changes
+#	the vertical resolution from 1/216" to 1/180", and the graphics
+#	aspect ratio from 5:6 to 1:1. HOWEVER, there does not appear to
+#	be a control sequence that switches into this mode--it must be
+#	done by hand!
+#
+
+#
+# Basic capabilities (printer not in AGM):
+#
+Gibmxl+basic,
+
+	orc#12,
+	orhi#120,
+	orl#36,
+	orvi#216,
+
+	cub1=\b,
+
+	cpi=%?%p1%{10}%=%t^R%e%p1%{12}%=%t\E:%e%p1%{17}%=%t^O%;,
+	cvr=%?%p1%{0}%>%p1%{256}%<%&%t\E3%p1%c%;,
+
+	is1=^Q^X,
+	is2=^R\EP0\EA\014\E2\EC\102\EO\ER\Eb\E50\EF\EH\EW0\ET\E-0\E_0\E7,
+	is3=\EX\001\120,
+
+	smglp=\EX%p1%{1}%+%c%p2%{1}%+%c,
+
+	use=Gibmg+basic,
+
+#
+# Basic capabilities (printer in AGM):
+#
+Gibmxlagm+basic,
+
+	orl#30,
+	orvi#180,
+
+	is2=^R\EP0\EA\012\E2\EC\102\EO\ER\Eb\E50\EF\EH\EW0\ET\E-0\E_0\E7,
+
+	use=Gibmxl+basic,
+
+#
+# Graphics capabilities (low resolution, 8-pin, 5:6 aspect ratio):
+#
+Gibmxl+low+5x6,
+
+	spinv#72,
+	spinh#60,
+
+#   defbi=
+#	Set the line spacing to 8/72 inch (9 lines per inch)
+#	to get 72 dots per inch vertically (9 lines/" * 8 pins/line).
+#	Set the character spacing to pica (1/10 inch or 10 characters
+#	per inch); at 60 dots per inch horizontally this means 6
+#	dots per character.
+#	Set vertical and horizontal tab stops at the upper left corner
+#	of the image, then tab to the upper left corner.
+#	Note: $<> is a true null (only works with special Curses routine).
+#	THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although
+#	maybe not in the first column.)
+	u6=%?%p5%{1}%=%t\EA\010\E2^R\EB%p2%{8}%/%c$<>\ED%p1%{6}%/%c$<>\013\r\t%;,
+	defbi=%?%p5%{1}%=%t\EA\010\E2^R\EB%p2%{8}%/%c$<>\ED%p1%{6}%/%c$<>\013\r\t%;,
+
+	use=Gibmc+low+5x6,
+
+#
+# Graphics capabilities (low resolution, 8-pin, 1:1 aspect ratio):
+#
+Gibmxl+low+1x1,
+
+	spinv#60,
+
+#	In AGM the "defbi" cap from Gibmxl+low+5x6 will work. The
+#	line spacing will be 8/60 inch to get 60 dots per inch, using
+#	the same control sequence.
+
+	use=Gibmxl+low+5x6,
+
+#
+# Graphics capabilities (high resolution, 24-pin, 5:6 aspect ratio):
+#
+#	This doesn't work as the pin spacing doesn't get set to
+#	1/216 inch, but stays at 1/180 inch, even out of AGM.
+#
+
+#
+# Graphics capabilities (high resolution, 24-pin, 1:1 aspect ratio):
+#
+Gibmxl+high+1x1,
+
+	npins#24,
+	spinv#180,
+	spinh#180,
+
+	porder=1\,2\,3\,4\,5\,6\,7\,8\,9\,10\,11\,12\,13\,14\,15\,16\,17\,18\,19\,20\,21\,22\,23\,24;0,
+
+	sbim=\E*\047%p1%{256}%m%c%p1%{256}%/%c,
+
+#   defbi=
+#	Set the line spacing to 8/60 inch (7.5 lines per inch)
+#	to get 180 dots per inch vertically (7.5 lines/" * 24 pins/line).
+#	This requires the printer or emulation in Alternate Graphics Mode.
+#	Set the character spacing to pica (1/10 inch or 10 characters
+#	per inch); at 180 dots per inch horizontally this means 18
+#	dots per character.
+#	Set vertical and horizontal tab stops at the upper left corner
+#	of the image, then tab to the upper left corner.
+#	Note: $<> is a true null (only works with special Curses routine).
+#	THIS ASSUMES WE START AT THE TOP OF THE PAGE! (although
+#	maybe not in the first column.)
+	u6=%?%p5%{1}%=%t\EA\010\E2^R\EB%p2%{24}%/%c$<>\ED%p1%{18}%/%c$<>\013\r\t%;,
+	defbi=%?%p5%{1}%=%t\EA\010\E2^R\EB%p2%{24}%/%c$<>\ED%p1%{18}%/%c$<>\013\r\t%;,
+
+	use=Gibmc+low+5x6,
+