/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Enclosure Services Device target driver
*
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
* Copyright (c) 2011 Bayard G. Bell. All rights reserved.
*/
#include <sys/modctl.h>
#include <sys/file.h>
#include <sys/scsi/scsi.h>
#include <sys/scsi/generic/status.h>
#include <sys/scsi/targets/sesio.h>
#include <sys/scsi/targets/ses.h>
/*
* Power management defines (should be in a common include file?)
*/
#define PM_HARDWARE_STATE_PROP "pm-hardware-state"
#define PM_NEEDS_SUSPEND_RESUME "needs-suspend-resume"
/*
* Global Driver Data
*/
int ses_io_time = SES_IO_TIME;
static int ses_retry_count = SES_RETRY_COUNT * SES_RETRY_MULTIPLIER;
#ifdef DEBUG
int ses_debug = 0;
#else /* DEBUG */
#define ses_debug 0
#endif /* DEBUG */
/*
* External Enclosure Functions
*/
extern int ses_softc_init(ses_softc_t *, int);
extern int ses_init_enc(ses_softc_t *);
extern int ses_get_encstat(ses_softc_t *, int);
extern int ses_set_encstat(ses_softc_t *, uchar_t, int);
extern int ses_get_objstat(ses_softc_t *, ses_objarg *, int);
extern int ses_set_objstat(ses_softc_t *, ses_objarg *, int);
extern int safte_softc_init(ses_softc_t *, int);
extern int safte_init_enc(ses_softc_t *);
extern int safte_get_encstat(ses_softc_t *, int);
extern int safte_set_encstat(ses_softc_t *, uchar_t, int);
extern int safte_get_objstat(ses_softc_t *, ses_objarg *, int);
extern int safte_set_objstat(ses_softc_t *, ses_objarg *, int);
extern int sen_softc_init(ses_softc_t *, int);
extern int sen_init_enc(ses_softc_t *);
extern int sen_get_encstat(ses_softc_t *, int);
extern int sen_set_encstat(ses_softc_t *, uchar_t, int);
extern int sen_get_objstat(ses_softc_t *, ses_objarg *, int);
extern int sen_set_objstat(ses_softc_t *, ses_objarg *, int);
/*
* Local Function prototypes
*/
static int ses_info(dev_info_t *, ddi_info_cmd_t, void *, void **);
static int ses_probe(dev_info_t *);
static int ses_attach(dev_info_t *, ddi_attach_cmd_t);
static int ses_detach(dev_info_t *, ddi_detach_cmd_t);
static int is_enc_dev(ses_softc_t *, struct scsi_inquiry *, int, enctyp *);
static int ses_doattach(dev_info_t *dip);
static int ses_open(dev_t *, int, int, cred_t *);
static int ses_close(dev_t, int, int, cred_t *);
static int ses_ioctl(dev_t, int, intptr_t, int, cred_t *, int *);
static encvec vecs[3] = {
{
ses_softc_init, ses_init_enc, ses_get_encstat,
ses_set_encstat, ses_get_objstat, ses_set_objstat
},
{
safte_softc_init, safte_init_enc, safte_get_encstat,
safte_set_encstat, safte_get_objstat, safte_set_objstat,
},
{
sen_softc_init, sen_init_enc, sen_get_encstat,
sen_set_encstat, sen_get_objstat, sen_set_objstat
}
};
/*
* Local Functions
*/
static int ses_start(struct buf *bp);
static int ses_decode_sense(struct scsi_pkt *pkt, int *err);
static void ses_get_pkt(struct buf *bp, int (*func)(opaque_t));
static void ses_callback(struct scsi_pkt *pkt);
static void ses_restart(void *arg);
/*
* Local Static Data
*/
#ifndef D_HOTPLUG
#define D_HOTPLUG 0
#endif /* D_HOTPLUG */
static struct cb_ops ses_cb_ops = {
ses_open, /* open */
ses_close, /* close */
nodev, /* strategy */
nodev, /* print */
nodev, /* dump */
nodev, /* read */
nodev, /* write */
ses_ioctl, /* ioctl */
nodev, /* devmap */
nodev, /* mmap */
nodev, /* segmap */
nochpoll, /* poll */
ddi_prop_op, /* cb_prop_op */
0, /* streamtab */
#if !defined(CB_REV)
D_MP | D_NEW | D_HOTPLUG /* Driver compatibility flag */
#else /* !defined(CB_REV) */
D_MP | D_NEW | D_HOTPLUG, /* Driver compatibility flag */
CB_REV, /* cb_ops version number */
nodev, /* aread */
nodev /* awrite */
#endif /* !defined(CB_REV) */
};
static struct dev_ops ses_dev_ops = {
DEVO_REV, /* devo_rev, */
0, /* refcnt */
ses_info, /* info */
nulldev, /* identify */
ses_probe, /* probe */
ses_attach, /* attach */
ses_detach, /* detach */
nodev, /* reset */
&ses_cb_ops, /* driver operations */
(struct bus_ops *)NULL, /* bus operations */
NULL, /* power */
ddi_quiesce_not_needed, /* quiesce */
};
static void *estate = NULL;
static const char *Snm = "ses";
static const char *Str = "%s\n";
static const char *efl = "copyin/copyout EFAULT @ line %d";
static const char *fail_msg = "%stransport failed: reason '%s': %s";
/*
* autoconfiguration routines.
*/
static struct modldrv modldrv = {
&mod_driverops,
"SCSI Enclosure Services",
&ses_dev_ops
};
static struct modlinkage modlinkage = {
MODREV_1, &modldrv, NULL
};
int
_init(void)
{
int status;
status = ddi_soft_state_init(&estate, sizeof (ses_softc_t), 0);
if (status == 0) {
if ((status = mod_install(&modlinkage)) != 0) {
ddi_soft_state_fini(&estate);
}
}
return (status);
}
int
_fini(void)
{
int status;
if ((status = mod_remove(&modlinkage)) != 0) {
return (status);
}
ddi_soft_state_fini(&estate);
return (status);
}
int
_info(struct modinfo *modinfop)
{
return (mod_info(&modlinkage, modinfop));
}
static int
ses_probe(dev_info_t *dip)
{
int err;
struct scsi_device *devp;
enctyp ep;
/*
* I finally figured out why we return success
* on every probe. The devices that we attach to
* don't all report as being the same "device type"
*
* 1) A5x00 -- report as Enclosure Services (0xD) SES
* 2) A1000 -- report as Direct Access (0x0) SES
* uses the same target as raid controler.
* 3) D1000 -- report as processor (0x3) SAFTE
* 3) D240 -- report as processor (0x3) SAFTE
*
* We also reportedly attach to SEN devices which I
* believe reside in a Tobasco tray. I have never
* been able to get one to attach.
*
*/
if (dip == NULL)
return (DDI_PROBE_FAILURE);
/* SES_LOG(NULL, SES_CE_DEBUG1, "ses_probe: OK"); */
if (ddi_dev_is_sid(dip) == DDI_SUCCESS) {
return (DDI_PROBE_DONTCARE);
}
devp = ddi_get_driver_private(dip);
/* Legacy: prevent driver.conf specified ses nodes on atapi. */
if (scsi_ifgetcap(&devp->sd_address, "interconnect-type", -1) ==
INTERCONNECT_ATAPI)
return (DDI_PROBE_FAILURE);
/*
* XXX: Breakage from the x86 folks.
*/
if (strcmp(ddi_get_name(ddi_get_parent(dip)), "ata") == 0) {
return (DDI_PROBE_FAILURE);
}
switch (err = scsi_probe(devp, SLEEP_FUNC)) {
case SCSIPROBE_EXISTS:
if (is_enc_dev(NULL, devp->sd_inq, SUN_INQSIZE, &ep)) {
break;
}
/* FALLTHROUGH */
case SCSIPROBE_NORESP:
scsi_unprobe(devp);
return (DDI_PROBE_FAILURE);
default:
SES_LOG(NULL, SES_CE_DEBUG9,
"ses_probe: probe error %d", err);
scsi_unprobe(devp);
return (DDI_PROBE_FAILURE);
}
scsi_unprobe(devp);
return (DDI_PROBE_SUCCESS);
}
static int
ses_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
int inst, err;
ses_softc_t *ssc;
inst = ddi_get_instance(dip);
switch (cmd) {
case DDI_ATTACH:
SES_LOG(NULL, SES_CE_DEBUG9, "ses_attach: DDI_ATTACH ses%d",
inst);
err = ses_doattach(dip);
if (err == DDI_FAILURE) {
return (DDI_FAILURE);
}
SES_LOG(NULL, SES_CE_DEBUG4,
"ses_attach: DDI_ATTACH OK ses%d", inst);
break;
case DDI_RESUME:
if ((ssc = ddi_get_soft_state(estate, inst)) == NULL) {
return (DDI_FAILURE);
}
SES_LOG(ssc, SES_CE_DEBUG1, "ses_attach: DDI_ATTACH ses%d",
inst);
ssc->ses_suspended = 0;
break;
default:
return (DDI_FAILURE);
}
return (DDI_SUCCESS);
}
static int
is_enc_dev(ses_softc_t *ssc, struct scsi_inquiry *inqp, int iqlen, enctyp *ep)
{
uchar_t dt = (inqp->inq_dtype & DTYPE_MASK);
uchar_t *iqd = (uchar_t *)inqp;
if (dt == DTYPE_ESI) {
if (strncmp(inqp->inq_vid, SEN_ID, SEN_ID_LEN) == 0) {
SES_LOG(ssc, SES_CE_DEBUG3, "SEN device found");
*ep = SEN_TYPE;
} else if (inqp->inq_rdf == RDF_SCSI2) {
/*
* Per SPC4 #6.4.2 Standard Inquiry Data, response
* data format (RDF) values of 0 and 1 are Obsolete,
* whereas values greater than 2 are Reserved
*/
SES_LOG(ssc, SES_CE_DEBUG3, "SES device found");
*ep = SES_TYPE;
} else {
SES_LOG(ssc, SES_CE_DEBUG3, "Pre-SCSI3 SES device");
*ep = SES_TYPE;
}
return (1);
}
if ((iqd[6] & 0x40) && inqp->inq_rdf >= RDF_SCSI2) {
/*
* PassThrough Device.
*/
*ep = SES_TYPE;
SES_LOG(ssc, SES_CE_DEBUG3, "Passthru SES device");
return (1);
}
if (iqlen < 47) {
SES_LOG(ssc, CE_NOTE,
"INQUIRY data too short to determine SAF-TE");
return (0);
}
if (strncmp((char *)&iqd[44], "SAF-TE", 4) == 0) {
*ep = SAFT_TYPE;
SES_LOG(ssc, SES_CE_DEBUG3, "SAF-TE device found");
return (1);
}
return (0);
}
/*
* Attach ses device.
*
* XXX: Power management is NOT supported. A token framework
* is provided that will need to be extended assuming we have
* ses devices we can power down. Currently, we don't have any.
*/
static int
ses_doattach(dev_info_t *dip)
{
int inst, err;
Scsidevp devp;
ses_softc_t *ssc;
enctyp etyp;
inst = ddi_get_instance(dip);
/*
* Workaround for bug #4154979- for some reason we can
* be called with identical instance numbers but for
* different dev_info_t-s- all but one are bogus.
*
* Bad Dog! No Biscuit!
*
* A quick workaround might be to call ddi_soft_state_zalloc
* unconditionally, as the implementation fails these calls
* if there's an item already allocated. A more reasonable
* and longer term change is to move the allocation past
* the probe for the device's existence as most of these
* 'bogus' calls are for nonexistent devices.
*/
devp = ddi_get_driver_private(dip);
devp->sd_dev = dip;
/*
* Determine whether the { i, t, l } we're called
* to start is an enclosure services device.
*/
/*
* Call the scsi_probe routine to see whether
* we actually have an Enclosure Services device at
* this address.
*/
err = scsi_probe(devp, SLEEP_FUNC);
if (err != SCSIPROBE_EXISTS) {
SES_LOG(NULL, SES_CE_DEBUG9,
"ses_doattach: probe error %d", err);
scsi_unprobe(devp);
return (DDI_FAILURE);
}
/* Call is_enc_dev() to get the etyp */
if (!(is_enc_dev(NULL, devp->sd_inq, SUN_INQSIZE, &etyp))) {
SES_LOG(NULL, CE_WARN,
"ses_doattach: ses%d: is_enc_dev failure", inst);
scsi_unprobe(devp);
return (DDI_FAILURE);
}
if (ddi_soft_state_zalloc(estate, inst) != DDI_SUCCESS) {
scsi_unprobe(devp);
SES_LOG(NULL, CE_NOTE, "ses%d: softalloc fails", inst);
return (DDI_FAILURE);
}
ssc = ddi_get_soft_state(estate, inst);
if (ssc == NULL) {
scsi_unprobe(devp);
SES_LOG(NULL, CE_NOTE, "ses%d: get_soft_state fails", inst);
return (DDI_FAILURE);
}
devp->sd_private = (opaque_t)ssc;
ssc->ses_devp = devp;
err = ddi_create_minor_node(dip, "0", S_IFCHR, inst,
DDI_NT_SCSI_ENCLOSURE, NULL);
if (err == DDI_FAILURE) {
ddi_remove_minor_node(dip, NULL);
SES_LOG(ssc, CE_NOTE, "minor node creation failed");
ddi_soft_state_free(estate, inst);
scsi_unprobe(devp);
return (DDI_FAILURE);
}
ssc->ses_type = etyp;
ssc->ses_vec = vecs[etyp];
/* Call SoftC Init Routine A bit later... */
ssc->ses_rqbp = scsi_alloc_consistent_buf(SES_ROUTE(ssc),
NULL, MAX_SENSE_LENGTH, B_READ, SLEEP_FUNC, NULL);
if (ssc->ses_rqbp != NULL) {
ssc->ses_rqpkt = scsi_init_pkt(SES_ROUTE(ssc), NULL,
ssc->ses_rqbp, CDB_GROUP0, 1, 0, PKT_CONSISTENT,
SLEEP_FUNC, NULL);
}
if (ssc->ses_rqbp == NULL || ssc->ses_rqpkt == NULL) {
ddi_remove_minor_node(dip, NULL);
SES_LOG(ssc, CE_NOTE, "scsi_init_pkt of rqbuf failed");
if (ssc->ses_rqbp != NULL) {
scsi_free_consistent_buf(ssc->ses_rqbp);
ssc->ses_rqbp = NULL;
}
ddi_soft_state_free(estate, inst);
scsi_unprobe(devp);
return (DDI_FAILURE);
}
ssc->ses_rqpkt->pkt_private = (opaque_t)ssc;
ssc->ses_rqpkt->pkt_address = *(SES_ROUTE(ssc));
ssc->ses_rqpkt->pkt_comp = ses_callback;
ssc->ses_rqpkt->pkt_time = ses_io_time;
ssc->ses_rqpkt->pkt_flags = FLAG_NOPARITY|FLAG_NODISCON|FLAG_SENSING;
ssc->ses_rqpkt->pkt_cdbp[0] = SCMD_REQUEST_SENSE;
ssc->ses_rqpkt->pkt_cdbp[1] = 0;
ssc->ses_rqpkt->pkt_cdbp[2] = 0;
ssc->ses_rqpkt->pkt_cdbp[3] = 0;
ssc->ses_rqpkt->pkt_cdbp[4] = MAX_SENSE_LENGTH;
ssc->ses_rqpkt->pkt_cdbp[5] = 0;
switch (scsi_ifgetcap(SES_ROUTE(ssc), "auto-rqsense", 1)) {
case 1:
/* if already set, don't reset it */
ssc->ses_arq = 1;
break;
case 0:
/* try and set it */
ssc->ses_arq = ((scsi_ifsetcap(SES_ROUTE(ssc),
"auto-rqsense", 1, 1) == 1) ? 1 : 0);
break;
default:
/* probably undefined, so zero it out */
ssc->ses_arq = 0;
break;
}
ssc->ses_sbufp = getrbuf(KM_SLEEP);
cv_init(&ssc->ses_sbufcv, NULL, CV_DRIVER, NULL);
/*
* If the HBA supports wide, tell it to use wide.
*/
if (scsi_ifgetcap(SES_ROUTE(ssc), "wide-xfer", 1) != -1) {
int wd = ((devp->sd_inq->inq_rdf == RDF_SCSI2) &&
(devp->sd_inq->inq_wbus16 || devp->sd_inq->inq_wbus32))
? 1 : 0;
(void) scsi_ifsetcap(SES_ROUTE(ssc), "wide-xfer", wd, 1);
}
/*
* Now do ssc init of enclosure specifics.
* At the same time, check to make sure getrbuf
* actually succeeded.
*/
if ((*ssc->ses_vec.softc_init)(ssc, 1)) {
SES_LOG(ssc, SES_CE_DEBUG3, "failed softc init");
(void) (*ssc->ses_vec.softc_init)(ssc, 0);
ddi_remove_minor_node(dip, NULL);
scsi_destroy_pkt(ssc->ses_rqpkt);
scsi_free_consistent_buf(ssc->ses_rqbp);
if (ssc->ses_sbufp) {
freerbuf(ssc->ses_sbufp);
}
cv_destroy(&ssc->ses_sbufcv);
ddi_soft_state_free(estate, inst);
scsi_unprobe(devp);
return (DDI_FAILURE);
}
/*
* create this property so that PM code knows we want
* to be suspended at PM time
*/
(void) ddi_prop_update_string(DDI_DEV_T_NONE, dip,
PM_HARDWARE_STATE_PROP, PM_NEEDS_SUSPEND_RESUME);
/* announce the existence of this device */
ddi_report_dev(dip);
return (DDI_SUCCESS);
}
/*
* Detach ses device.
*
* XXX: Power management is NOT supported. A token framework
* is provided that will need to be extended assuming we have
* ses devices we can power down. Currently, we don't have any.
*/
static int
ses_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
ses_softc_t *ssc;
int inst;
switch (cmd) {
case DDI_DETACH:
inst = ddi_get_instance(dip);
ssc = ddi_get_soft_state(estate, inst);
if (ssc == NULL) {
cmn_err(CE_NOTE,
"ses%d: DDI_DETACH, no softstate found", inst);
return (DDI_FAILURE);
}
if (ISOPEN(ssc)) {
return (DDI_FAILURE);
}
#if !defined(lint)
/* LINTED */
_NOTE(COMPETING_THREADS_NOW);
#endif /* !defined(lint) */
if (ssc->ses_vec.softc_init)
(void) (*ssc->ses_vec.softc_init)(ssc, 0);
#if !defined(lint)
_NOTE(NO_COMPETING_THREADS_NOW);
#endif /* !defined(lint) */
(void) scsi_ifsetcap(SES_ROUTE(ssc), "auto-rqsense", 1, 0);
scsi_destroy_pkt(ssc->ses_rqpkt);
scsi_free_consistent_buf(ssc->ses_rqbp);
freerbuf(ssc->ses_sbufp);
cv_destroy(&ssc->ses_sbufcv);
ddi_soft_state_free(estate, inst);
ddi_prop_remove_all(dip);
ddi_remove_minor_node(dip, NULL);
scsi_unprobe(ddi_get_driver_private(dip));
break;
case DDI_SUSPEND:
inst = ddi_get_instance(dip);
if ((ssc = ddi_get_soft_state(estate, inst)) == NULL) {
cmn_err(CE_NOTE,
"ses%d: DDI_SUSPEND, no softstate found", inst);
return (DDI_FAILURE);
}
/*
* If driver idle, accept suspend request.
* If it's busy, reject it. This keeps things simple!
*/
mutex_enter(SES_MUTEX);
if (ssc->ses_sbufbsy) {
mutex_exit(SES_MUTEX);
return (DDI_FAILURE);
}
ssc->ses_suspended = 1;
mutex_exit(SES_MUTEX);
break;
default:
return (DDI_FAILURE);
}
return (DDI_SUCCESS);
}
/* ARGSUSED */
static int
ses_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
{
dev_t dev;
ses_softc_t *ssc;
int inst, error;
switch (infocmd) {
case DDI_INFO_DEVT2DEVINFO:
dev = (dev_t)arg;
inst = getminor(dev);
if ((ssc = ddi_get_soft_state(estate, inst)) == NULL) {
return (DDI_FAILURE);
}
*result = (void *) ssc->ses_devp->sd_dev;
error = DDI_SUCCESS;
break;
case DDI_INFO_DEVT2INSTANCE:
dev = (dev_t)arg;
inst = getminor(dev);
*result = (void *)(uintptr_t)inst;
error = DDI_SUCCESS;
break;
default:
error = DDI_FAILURE;
}
return (error);
}
/*
* Unix Entry Points
*/
/* ARGSUSED */
static int
ses_open(dev_t *dev_p, int flag, int otyp, cred_t *cred_p)
{
ses_softc_t *ssc;
if ((ssc = ddi_get_soft_state(estate, getminor(*dev_p))) == NULL) {
return (ENXIO);
}
/*
* If the device is powered down, request it's activation.
* If it can't be activated, fail open.
*/
if (ssc->ses_suspended &&
ddi_dev_is_needed(SES_DEVINFO(ssc), 0, 1) != DDI_SUCCESS) {
return (EIO);
}
mutex_enter(SES_MUTEX);
if (otyp == OTYP_LYR)
ssc->ses_lyropen++;
else
ssc->ses_oflag = 1;
ssc->ses_present = (ssc->ses_present)? ssc->ses_present: SES_OPENING;
mutex_exit(SES_MUTEX);
return (EOK);
}
/*ARGSUSED*/
static int
ses_close(dev_t dev, int flag, int otyp, cred_t *cred_p)
{
ses_softc_t *ssc;
if ((ssc = ddi_get_soft_state(estate, getminor(dev))) == NULL) {
return (ENXIO);
}
if (ssc->ses_suspended) {
(void) ddi_dev_is_needed(SES_DEVINFO(ssc), 0, 1);
}
mutex_enter(SES_MUTEX);
if (otyp == OTYP_LYR)
ssc->ses_lyropen -= (ssc->ses_lyropen)? 1: 0;
else
ssc->ses_oflag = 0;
mutex_exit(SES_MUTEX);
return (0);
}
/*ARGSUSED3*/
static int
ses_ioctl(dev_t dev, int cmd, intptr_t arg, int flg, cred_t *cred_p, int *rvalp)
{
ses_softc_t *ssc;
ses_object k, *up;
ses_objarg x;
uchar_t t;
uchar_t i;
int rv = 0;
if ((ssc = ddi_get_soft_state(estate, getminor(dev))) == NULL ||
ssc->ses_present == SES_CLOSED) {
return (ENXIO);
}
switch (cmd) {
case SESIOC_GETNOBJ:
if (ddi_copyout(&ssc->ses_nobjects, (void *)arg,
sizeof (int), flg)) {
rv = EFAULT;
break;
}
break;
case SESIOC_GETOBJMAP:
up = (ses_object *) arg;
mutex_enter(SES_MUTEX);
for (i = 0; i != ssc->ses_nobjects; i++) {
k.obj_id = i;
k.subencid = ssc->ses_objmap[i].subenclosure;
k.elem_type = ssc->ses_objmap[i].enctype;
if (ddi_copyout(&k, up, sizeof (k), flg)) {
rv = EFAULT;
break;
}
up++;
}
mutex_exit(SES_MUTEX);
break;
case SESIOC_INIT:
if (drv_priv(cred_p) != 0) {
rv = EPERM;
break;
}
rv = (*ssc->ses_vec.init_enc)(ssc);
break;
case SESIOC_GETENCSTAT:
if ((ssc->ses_encstat & ENCI_SVALID) == 0) {
rv = (*ssc->ses_vec.get_encstat)(ssc, KM_SLEEP);
if (rv) {
break;
}
}
t = ssc->ses_encstat & 0xf;
if (ddi_copyout(&t, (void *)arg, sizeof (t), flg))
rv = EFAULT;
/*
* And always invalidate enclosure status on the way out.
*/
mutex_enter(SES_MUTEX);
ssc->ses_encstat &= ~ENCI_SVALID;
mutex_exit(SES_MUTEX);
break;
case SESIOC_SETENCSTAT:
if (drv_priv(cred_p) != 0) {
rv = EPERM;
break;
}
if (ddi_copyin((void *)arg, &t, sizeof (t), flg))
rv = EFAULT;
else
rv = (*ssc->ses_vec.set_encstat)(ssc, t, KM_SLEEP);
mutex_enter(SES_MUTEX);
ssc->ses_encstat &= ~ENCI_SVALID;
mutex_exit(SES_MUTEX);
break;
case SESIOC_GETOBJSTAT:
if (ddi_copyin((void *)arg, &x, sizeof (x), flg)) {
rv = EFAULT;
break;
}
if (x.obj_id >= ssc->ses_nobjects) {
rv = EINVAL;
break;
}
if ((rv = (*ssc->ses_vec.get_objstat)(ssc, &x, KM_SLEEP)) != 0)
break;
if (ddi_copyout(&x, (void *)arg, sizeof (x), flg))
rv = EFAULT;
else {
/*
* Now that we no longer poll, svalid never stays true.
*/
mutex_enter(SES_MUTEX);
ssc->ses_objmap[x.obj_id].svalid = 0;
mutex_exit(SES_MUTEX);
}
break;
case SESIOC_SETOBJSTAT:
if (drv_priv(cred_p) != 0) {
rv = EPERM;
break;
}
if (ddi_copyin((void *)arg, &x, sizeof (x), flg)) {
rv = EFAULT;
break;
}
if (x.obj_id >= ssc->ses_nobjects) {
rv = EINVAL;
break;
}
rv = (*ssc->ses_vec.set_objstat)(ssc, &x, KM_SLEEP);
if (rv == 0) {
mutex_enter(SES_MUTEX);
ssc->ses_objmap[x.obj_id].svalid = 0;
mutex_exit(SES_MUTEX);
}
break;
case USCSICMD:
if (drv_priv(cred_p) != 0) {
rv = EPERM;
break;
}
rv = ses_uscsi_cmd(ssc, (Uscmd *)arg, flg);
break;
default:
rv = ENOTTY;
break;
}
return (rv);
}
/*
* Loop on running a kernel based command
*
* FIXME: This routine is not really needed.
*/
int
ses_runcmd(ses_softc_t *ssc, Uscmd *lp)
{
int e;
lp->uscsi_status = 0;
e = ses_uscsi_cmd(ssc, lp, FKIOCTL);
#ifdef not
/*
* Debug: Nice cross-check code for verifying consistent status.
*/
if (lp->uscsi_status) {
if (lp->uscsi_status == STATUS_CHECK) {
SES_LOG(ssc, CE_NOTE, "runcmd<cdb[0]="
"0x%x->%s ASC/ASCQ=0x%x/0x%x>",
lp->uscsi_cdb[0],
scsi_sname(lp->uscsi_rqbuf[2] & 0xf),
lp->uscsi_rqbuf[12] & 0xff,
lp->uscsi_rqbuf[13] & 0xff);
} else {
SES_LOG(ssc, CE_NOTE, "runcmd<cdb[0]="
"0x%x -> Status 0x%x", lp->uscsi_cdb[0],
lp->uscsi_status);
}
}
#endif /* not */
return (e);
}
/*
* Run a scsi command.
*/
int
ses_uscsi_cmd(ses_softc_t *ssc, Uscmd *Uc, int Uf)
{
Uscmd *uscmd;
struct buf *bp;
enum uio_seg uioseg;
int err;
/*
* Grab local 'special' buffer
*/
mutex_enter(SES_MUTEX);
while (ssc->ses_sbufbsy) {
cv_wait(&ssc->ses_sbufcv, &ssc->ses_devp->sd_mutex);
}
ssc->ses_sbufbsy = 1;
mutex_exit(SES_MUTEX);
/*
* If the device is powered down, request it's activation.
* This check must be done after setting ses_sbufbsy!
*/
if (ssc->ses_suspended &&
ddi_dev_is_needed(SES_DEVINFO(ssc), 0, 1) != DDI_SUCCESS) {
mutex_enter(SES_MUTEX);
ssc->ses_sbufbsy = 0;
mutex_exit(SES_MUTEX);
return (EIO);
}
err = scsi_uscsi_alloc_and_copyin((intptr_t)Uc, Uf,
SES_ROUTE(ssc), &uscmd);
if (err != 0) {
SES_LOG(ssc, SES_CE_DEBUG1, "ses_uscsi_cmd: "
"scsi_uscsi_alloc_and_copyin failed\n");
mutex_enter(SES_MUTEX);
ssc->ses_sbufbsy = 0;
cv_signal(&ssc->ses_sbufcv);
mutex_exit(SES_MUTEX);
SES_LOG(ssc, SES_CE_DEBUG2, efl, __LINE__);
return (err);
}
/*
* Copy the uscsi command related infos to ssc for use in ses_start()
* and ses_callback().
*/
bcopy(uscmd, &ssc->ses_uscsicmd, sizeof (Uscmd));
if (uscmd->uscsi_cdb != NULL) {
bcopy(uscmd->uscsi_cdb, &ssc->ses_srqcdb,
(size_t)(uscmd->uscsi_cdblen));
}
ssc->ses_uscsicmd.uscsi_status = 0;
bp = ssc->ses_sbufp;
bp->av_back = (struct buf *)NULL;
bp->av_forw = (struct buf *)NULL;
bp->b_back = (struct buf *)ssc;
bp->b_edev = NODEV;
if (uscmd->uscsi_cdb != NULL) {
if (uscmd->uscsi_cdblen == CDB_GROUP0) {
SES_LOG(ssc, SES_CE_DEBUG7,
"scsi_cmd: %x %x %x %x %x %x",
((char *)uscmd->uscsi_cdb)[0],
((char *)uscmd->uscsi_cdb)[1],
((char *)uscmd->uscsi_cdb)[2],
((char *)uscmd->uscsi_cdb)[3],
((char *)uscmd->uscsi_cdb)[4],
((char *)uscmd->uscsi_cdb)[5]);
} else {
SES_LOG(ssc, SES_CE_DEBUG7,
"scsi cmd: %x %x %x %x %x %x %x %x %x %x",
((char *)uscmd->uscsi_cdb)[0],
((char *)uscmd->uscsi_cdb)[1],
((char *)uscmd->uscsi_cdb)[2],
((char *)uscmd->uscsi_cdb)[3],
((char *)uscmd->uscsi_cdb)[4],
((char *)uscmd->uscsi_cdb)[5],
((char *)uscmd->uscsi_cdb)[6],
((char *)uscmd->uscsi_cdb)[7],
((char *)uscmd->uscsi_cdb)[8],
((char *)uscmd->uscsi_cdb)[9]);
}
}
uioseg = (Uf & FKIOCTL) ? UIO_SYSSPACE : UIO_USERSPACE;
err = scsi_uscsi_handle_cmd(NODEV, uioseg, uscmd,
ses_start, bp, NULL);
/*
* ses_callback() may set values for ssc->ses_uscsicmd or
* ssc->ses_srqsbuf, so copy them back to uscmd.
*/
if (uscmd->uscsi_rqbuf != NULL) {
bcopy(&ssc->ses_srqsbuf, uscmd->uscsi_rqbuf,
(size_t)(uscmd->uscsi_rqlen));
uscmd->uscsi_rqresid = ssc->ses_uscsicmd.uscsi_rqresid;
}
uscmd->uscsi_status = ssc->ses_uscsicmd.uscsi_status;
(void) scsi_uscsi_copyout_and_free((intptr_t)Uc, uscmd);
mutex_enter(SES_MUTEX);
ssc->ses_sbufbsy = 0;
cv_signal(&ssc->ses_sbufcv);
mutex_exit(SES_MUTEX);
return (err);
}
/*
* Command start and done functions.
*/
static int
ses_start(struct buf *bp)
{
ses_softc_t *ssc = (ses_softc_t *)bp->b_back;
SES_LOG(ssc, SES_CE_DEBUG9, "ses_start");
if (!BP_PKT(bp)) {
/*
* Allocate a packet.
*/
ses_get_pkt(bp, SLEEP_FUNC);
if (!BP_PKT(bp)) {
int err;
bp->b_resid = bp->b_bcount;
if (geterror(bp) == 0)
SET_BP_ERROR(bp, EIO);
err = geterror(bp);
biodone(bp);
return (err);
}
}
/*
* Initialize the transfer residue, error code, and retry count.
*/
bp->b_resid = 0;
SET_BP_ERROR(bp, 0);
#if !defined(lint)
_NOTE(NO_COMPETING_THREADS_NOW);
#endif /* !defined(lint) */
ssc->ses_retries = ses_retry_count;
#if !defined(lint)
/* LINTED */
_NOTE(COMPETING_THREADS_NOW);
#endif /* !defined(lint) */
SES_LOG(ssc, SES_CE_DEBUG9, "ses_start -> scsi_transport");
switch (scsi_transport(BP_PKT(bp))) {
case TRAN_ACCEPT:
return (0);
/* break; */
case TRAN_BUSY:
SES_LOG(ssc, SES_CE_DEBUG2,
"ses_start: TRANSPORT BUSY");
SES_ENABLE_RESTART(SES_RESTART_TIME, BP_PKT(bp));
return (0);
/* break; */
default:
SES_LOG(ssc, SES_CE_DEBUG2, "TRANSPORT ERROR\n");
SET_BP_ERROR(bp, EIO);
scsi_destroy_pkt(BP_PKT(bp));
SET_BP_PKT(bp, NULL);
biodone(bp);
return (EIO);
/* break; */
}
}
static void
ses_get_pkt(struct buf *bp, int (*func)())
{
ses_softc_t *ssc = (ses_softc_t *)bp->b_back;
Uscmd *scmd = &ssc->ses_uscsicmd;
struct scsi_pkt *pkt;
int stat_size = 1;
int flags = 0;
if ((scmd->uscsi_flags & USCSI_RQENABLE) && ssc->ses_arq) {
if (scmd->uscsi_rqlen > SENSE_LENGTH) {
stat_size = (int)(scmd->uscsi_rqlen) +
sizeof (struct scsi_arq_status) -
sizeof (struct scsi_extended_sense);
flags = PKT_XARQ;
} else {
stat_size = sizeof (struct scsi_arq_status);
}
}
if (bp->b_bcount) {
pkt = scsi_init_pkt(SES_ROUTE(ssc), NULL, bp,
scmd->uscsi_cdblen, stat_size, 0, flags,
func, (caddr_t)ssc);
} else {
pkt = scsi_init_pkt(SES_ROUTE(ssc), NULL, NULL,
scmd->uscsi_cdblen, stat_size, 0, flags,
func, (caddr_t)ssc);
}
SET_BP_PKT(bp, pkt);
if (pkt == (struct scsi_pkt *)NULL)
return;
bcopy(scmd->uscsi_cdb, pkt->pkt_cdbp, (size_t)scmd->uscsi_cdblen);
pkt->pkt_time = scmd->uscsi_timeout;
pkt->pkt_comp = ses_callback;
pkt->pkt_private = (opaque_t)ssc;
}
/*
* Restart ses command.
*/
static void
ses_restart(void *arg)
{
struct scsi_pkt *pkt = (struct scsi_pkt *)arg;
ses_softc_t *ssc = (ses_softc_t *)pkt->pkt_private;
struct buf *bp = ssc->ses_sbufp;
SES_LOG(ssc, SES_CE_DEBUG9, "ses_restart");
ssc->ses_restart_id = NULL;
switch (scsi_transport(pkt)) {
case TRAN_ACCEPT:
SES_LOG(ssc, SES_CE_DEBUG9,
"RESTART %d ok", ssc->ses_retries);
return;
/* break; */
case TRAN_BUSY:
SES_LOG(ssc, SES_CE_DEBUG1,
"RESTART %d TRANSPORT BUSY\n", ssc->ses_retries);
if (ssc->ses_retries > SES_NO_RETRY) {
ssc->ses_retries -= SES_BUSY_RETRY;
SES_ENABLE_RESTART(SES_RESTART_TIME, pkt);
return;
}
SET_BP_ERROR(bp, EBUSY);
break;
default:
SET_BP_ERROR(bp, EIO);
break;
}
SES_LOG(ssc, SES_CE_DEBUG1,
"RESTART %d TRANSPORT FAILED\n", ssc->ses_retries);
pkt = (struct scsi_pkt *)bp->av_back;
scsi_destroy_pkt(pkt);
bp->b_resid = bp->b_bcount;
SET_BP_PKT(bp, NULL);
biodone(bp);
}
/*
* Command completion processing
*/
#define HBA_RESET (STAT_BUS_RESET|STAT_DEV_RESET|STAT_ABORTED)
static void
ses_callback(struct scsi_pkt *pkt)
{
ses_softc_t *ssc = (ses_softc_t *)pkt->pkt_private;
struct buf *bp;
Uscmd *scmd;
int err;
char action;
bp = ssc->ses_sbufp;
scmd = &ssc->ses_uscsicmd;
/* SES_LOG(ssc, SES_CE_DEBUG9, "ses_callback"); */
/*
* Optimization: Normal completion.
*/
if (pkt->pkt_reason == CMD_CMPLT &&
!SCBP_C(pkt) &&
!(pkt->pkt_flags & FLAG_SENSING) &&
!pkt->pkt_resid) {
scsi_destroy_pkt(pkt);
SET_BP_PKT(bp, NULL);
biodone(bp);
return;
}
/*
* Abnormal completion.
*
* Assume most common error initially.
*/
err = EIO;
action = COMMAND_DONE;
if (scmd->uscsi_flags & USCSI_DIAGNOSE) {
ssc->ses_retries = SES_NO_RETRY;
}
CHECK_PKT:
if (pkt->pkt_reason != CMD_CMPLT) {
/* Process transport errors. */
switch (pkt->pkt_reason) {
case CMD_TIMEOUT:
/*
* If the transport layer didn't clear the problem,
* reset the target.
*/
if (! (pkt->pkt_statistics & HBA_RESET)) {
(void) scsi_reset(&pkt->pkt_address,
RESET_TARGET);
}
err = ETIMEDOUT;
break;
case CMD_INCOMPLETE:
case CMD_UNX_BUS_FREE:
/*
* No response? If probing, give up.
* Otherwise, keep trying until retries exhausted.
* Then lockdown the driver as the device is
* unplugged.
*/
if (ssc->ses_retries <= SES_NO_RETRY &&
!(scmd->uscsi_flags & USCSI_DIAGNOSE)) {
ssc->ses_present = SES_CLOSED;
}
/* Inhibit retries to speed probe/attach. */
if (ssc->ses_present < SES_OPEN) {
ssc->ses_retries = SES_NO_RETRY;
}
/* SES_CMD_RETRY4(ssc->ses_retries); */
err = ENXIO;
break;
case CMD_DATA_OVR:
/*
* XXX: Some HBA's (e.g. Adaptec 1740 and
* earlier ISP revs) report a DATA OVERRUN
* error instead of a transfer residue. So,
* we convert the error and restart.
*/
if ((bp->b_bcount - pkt->pkt_resid) > 0) {
SES_LOG(ssc, SES_CE_DEBUG6,
"ignoring overrun");
pkt->pkt_reason = CMD_CMPLT;
err = EOK;
goto CHECK_PKT;
}
ssc->ses_retries = SES_NO_RETRY;
/* err = EIO; */
break;
case CMD_DMA_DERR:
ssc->ses_retries = SES_NO_RETRY;
err = EFAULT;
break;
default:
/* err = EIO; */
break;
}
if (pkt == ssc->ses_rqpkt) {
SES_LOG(ssc, CE_WARN, fail_msg,
"Request Sense ",
scsi_rname(pkt->pkt_reason),
(ssc->ses_retries > 0)?
"retrying": "giving up");
pkt = (struct scsi_pkt *)bp->av_back;
action = QUE_SENSE;
} else {
SES_LOG(ssc, CE_WARN, fail_msg,
"", scsi_rname(pkt->pkt_reason),
(ssc->ses_retries > 0)?
"retrying": "giving up");
action = QUE_COMMAND;
}
/* Device exists, allow full error recovery. */
if (ssc->ses_retries > SES_NO_RETRY) {
ssc->ses_present = SES_OPEN;
}
/*
* Process status and sense data errors.
*/
} else {
ssc->ses_present = SES_OPEN;
action = ses_decode_sense(pkt, &err);
}
/*
* Initiate error recovery action, as needed.
*/
switch (action) {
case QUE_COMMAND_NOW:
/* SES_LOG(ssc, SES_CE_DEBUG1, "retrying cmd now"); */
if (ssc->ses_retries > SES_NO_RETRY) {
ssc->ses_retries -= SES_CMD_RETRY;
scmd->uscsi_status = 0;
if (ssc->ses_arq)
bzero(pkt->pkt_scbp,
sizeof (struct scsi_arq_status));
if (scsi_transport((struct scsi_pkt *)bp->av_back)
!= TRAN_ACCEPT) {
SES_ENABLE_RESTART(SES_RESTART_TIME,
(struct scsi_pkt *)bp->av_back);
}
return;
}
break;
case QUE_COMMAND:
SES_LOG(ssc, SES_CE_DEBUG1, "retrying cmd");
if (ssc->ses_retries > SES_NO_RETRY) {
ssc->ses_retries -=
(err == EBUSY)? SES_BUSY_RETRY: SES_CMD_RETRY;
scmd->uscsi_status = 0;
if (ssc->ses_arq)
bzero(pkt->pkt_scbp,
sizeof (struct scsi_arq_status));
SES_ENABLE_RESTART(
(err == EBUSY)? SES_BUSY_TIME: SES_RESTART_TIME,
(struct scsi_pkt *)bp->av_back);
return;
}
break;
case QUE_SENSE:
SES_LOG(ssc, SES_CE_DEBUG1, "retrying sense");
if (ssc->ses_retries > SES_NO_RETRY) {
ssc->ses_retries -= SES_SENSE_RETRY;
scmd->uscsi_status = 0;
bzero(&ssc->ses_srqsbuf, MAX_SENSE_LENGTH);
if (scsi_transport(ssc->ses_rqpkt) != TRAN_ACCEPT) {
SES_ENABLE_RESTART(SES_RESTART_TIME,
ssc->ses_rqpkt);
}
return;
}
break;
case COMMAND_DONE:
SES_LOG(ssc, SES_CE_DEBUG4, "cmd done");
pkt = (struct scsi_pkt *)bp->av_back;
bp->b_resid = pkt->pkt_resid;
if (bp->b_resid) {
SES_LOG(ssc, SES_CE_DEBUG6,
"transfer residue %ld(%ld)",
bp->b_bcount - bp->b_resid, bp->b_bcount);
}
break;
}
pkt = (struct scsi_pkt *)bp->av_back;
if (err) {
SES_LOG(ssc, SES_CE_DEBUG1, "SES: ERROR %d\n", err);
SET_BP_ERROR(bp, err);
bp->b_resid = bp->b_bcount;
}
scsi_destroy_pkt(pkt);
SET_BP_PKT(bp, NULL);
biodone(bp);
}
/*
* Check status and sense data and determine recovery.
*/
static int
ses_decode_sense(struct scsi_pkt *pkt, int *err)
{
ses_softc_t *ssc = (ses_softc_t *)pkt->pkt_private;
struct scsi_extended_sense *sense =
(struct scsi_extended_sense *)&ssc->ses_srqsbuf;
Uscmd *scmd = &ssc->ses_uscsicmd;
char sense_flag = 0;
uchar_t status = SCBP_C(pkt) & STATUS_MASK;
char *err_action;
char action;
uchar_t rqlen;
int amt;
/*
* Process manual request sense.
* Copy manual request sense to sense buffer.
*
* This is done if auto request sense is not enabled.
* Or the auto request sense failed and the request
* sense needs to be retried.
*/
if (pkt->pkt_flags & FLAG_SENSING) {
struct buf *sbp = ssc->ses_rqbp;
amt = min(MAX_SENSE_LENGTH,
sbp->b_bcount - sbp->b_resid);
rqlen = min((uchar_t)amt, scmd->uscsi_rqlen);
bcopy(sbp->b_un.b_addr, sense, rqlen);
scmd->uscsi_rqresid = scmd->uscsi_rqlen - rqlen;
sense_flag = 1;
/*
* Process auto request sense.
* Copy auto request sense to sense buffer.
*
* If auto request sense failed due to transport error,
* retry the command. Otherwise process the status and
* sense data.
*/
} else if (ssc->ses_arq && pkt->pkt_state & STATE_ARQ_DONE) {
struct scsi_arq_status *arq =
(struct scsi_arq_status *)(pkt->pkt_scbp);
uchar_t *arq_status = (uchar_t *)&arq->sts_rqpkt_status;
if (pkt->pkt_state & STATE_XARQ_DONE) {
amt = MAX_SENSE_LENGTH - arq->sts_rqpkt_resid;
} else {
if (arq->sts_rqpkt_resid > SENSE_LENGTH) {
amt = MAX_SENSE_LENGTH - arq->sts_rqpkt_resid;
} else {
amt = SENSE_LENGTH - arq->sts_rqpkt_resid;
}
}
if (arq->sts_rqpkt_reason != CMD_CMPLT) {
return (QUE_COMMAND);
}
rqlen = min((uchar_t)amt, scmd->uscsi_rqlen);
bcopy(&arq->sts_sensedata, sense, rqlen);
scmd->uscsi_status = status;
scmd->uscsi_rqresid = scmd->uscsi_rqlen - rqlen;
status = *arq_status & STATUS_MASK;
pkt->pkt_state &= ~STATE_ARQ_DONE;
sense_flag = 1;
}
/*
* Check status of REQUEST SENSE or command.
*
* If it's not successful, try retrying the original command
* and hope that it goes away. If not, we'll eventually run
* out of retries and die.
*/
switch (status) {
case STATUS_GOOD:
case STATUS_INTERMEDIATE:
case STATUS_MET:
/*
* If the command status is ok, we're done.
* Otherwise, examine the request sense data.
*/
if (! sense_flag) {
*err = EOK;
return (COMMAND_DONE);
}
break;
case STATUS_CHECK:
SES_LOG(ssc, SES_CE_DEBUG3, "status decode: check");
*err = EIO;
return (QUE_SENSE);
/* break; */
case STATUS_BUSY:
SES_LOG(ssc, SES_CE_DEBUG1, "status decode: busy");
/* SES_CMD_RETRY2(ssc->ses_retries); */
*err = EBUSY;
return (QUE_COMMAND);
/* break; */
case STATUS_RESERVATION_CONFLICT:
SES_LOG(ssc, SES_CE_DEBUG1, "status decode: reserved");
*err = EACCES;
return (COMMAND_DONE_ERROR);
/* break; */
case STATUS_TERMINATED:
SES_LOG(ssc, SES_CE_DEBUG1, "status decode: terminated");
*err = ECANCELED;
return (COMMAND_DONE_ERROR);
/* break; */
default:
SES_LOG(ssc, SES_CE_DEBUG1, "status 0x%x", status);
*err = EIO;
return (QUE_COMMAND);
/* break; */
}
/*
* Check REQUEST SENSE error code.
*
* Either there's no error, a retryable error,
* or it's dead. SES devices aren't very complex.
*/
err_action = "retrying";
switch (sense->es_key) {
case KEY_RECOVERABLE_ERROR:
*err = EOK;
err_action = "recovered";
action = COMMAND_DONE;
break;
case KEY_UNIT_ATTENTION:
/*
* This is common for RAID!
*/
/* *err = EIO; */
SES_CMD_RETRY1(ssc->ses_retries);
action = QUE_COMMAND_NOW;
break;
case KEY_NOT_READY:
case KEY_NO_SENSE:
/* *err = EIO; */
action = QUE_COMMAND;
break;
default:
/* *err = EIO; */
err_action = "fatal";
action = COMMAND_DONE_ERROR;
break;
}
SES_LOG(ssc, SES_CE_DEBUG1,
"cdb[0]= 0x%x %s, key=0x%x, ASC/ASCQ=0x%x/0x%x",
scmd->uscsi_cdb[0], err_action,
sense->es_key, sense->es_add_code, sense->es_qual_code);
#ifdef not
/*
* Dump cdb and sense data stat's for manufacturing.
*/
if (DEBUGGING_ERR || sd_error_level == SDERR_ALL) {
auto buf[128];
p = pkt->pkt_cdbp;
if ((j = scsi_cdb_size[CDB_GROUPID(*p)]) == 0)
j = CDB_SIZE;
/* Print cdb */
(void) sprintf(buf, "cmd:");
for (i = 0; i < j; i++) {
(void) sprintf(&buf[strlen(buf)],
hex, (uchar_t)*p++);
}
SES_LOG(ssc, SES_CE_DEBUG3, "%s", buf);
/* Suppress trailing zero's in sense data */
if (amt > 3) {
p = (char *)devp->sd_sense + amt;
for (j = amt; j > 3; j--) {
if (*(--p)) break;
}
} else {
j = amt;
}
/* Print sense data. */
(void) sprintf(buf, "sense:");
p = (char *)devp->sd_sense;
for (i = 0; i < j; i++) {
(void) sprintf(&buf[strlen(buf)],
hex, (uchar_t)*p++);
}
SES_LOG(ssc, SES_CE_DEBUG3, "%s", buf);
}
#endif /* not */
return (action);
}
/*PRINTFLIKE3*/
void
ses_log(ses_softc_t *ssc, int level, const char *fmt, ...)
{
va_list ap;
char buf[256];
va_start(ap, fmt);
(void) vsprintf(buf, fmt, ap);
va_end(ap);
if (ssc == (ses_softc_t *)NULL) {
switch (level) {
case SES_CE_DEBUG1:
if (ses_debug > 1)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG2:
if (ses_debug > 2)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG3:
if (ses_debug > 3)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG4:
if (ses_debug > 4)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG5:
if (ses_debug > 5)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG6:
if (ses_debug > 6)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG7:
if (ses_debug > 7)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG8:
if (ses_debug > 8)
cmn_err(CE_NOTE, "%s", buf);
break;
case SES_CE_DEBUG9:
if (ses_debug > 9)
cmn_err(CE_NOTE, "%s", buf);
break;
case CE_NOTE:
case CE_WARN:
case CE_PANIC:
cmn_err(level, "%s", buf);
break;
case SES_CE_DEBUG:
default:
cmn_err(CE_NOTE, "%s", buf);
break;
}
return;
}
switch (level) {
case CE_CONT:
case CE_NOTE:
case CE_WARN:
case CE_PANIC:
scsi_log(SES_DEVINFO(ssc), (char *)Snm, level, Str, buf);
break;
case SES_CE_DEBUG1:
if (ses_debug > 1)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG2:
if (ses_debug > 2)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG3:
if (ses_debug > 3)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG4:
if (ses_debug > 4)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG5:
if (ses_debug > 5)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG6:
if (ses_debug > 6)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG7:
if (ses_debug > 7)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG8:
if (ses_debug > 8)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG9:
if (ses_debug > 9)
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG,
Str, buf);
break;
case SES_CE_DEBUG:
default:
scsi_log(SES_DEVINFO(ssc), (char *)Snm, SCSI_DEBUG, Str, buf);
break;
}
}
/*
* mode: c
* Local variables:
* c-indent-level: 8
* c-brace-imaginary-offset: 0
* c-brace-offset: -8
* c-argdecl-indent: 8
* c-label-offset: -8
* c-continued-statement-offset: 8
* c-continued-brace-offset: 0
* End:
*/