--

-- Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved.

--

-- U.S. Government Rights - Commercial software. Government users are subject

-- to the Sun Microsystems, Inc. standard license agreement and applicable

-- provisions of the FAR and its supplements.

--

--

-- This distribution may include materials developed by third parties. Sun,

-- Sun Microsystems, the Sun logo and Solaris are trademarks or registered

-- trademarks of Sun Microsystems, Inc. in the U.S. and other countries.

--

--

-------------------------------------------------------

-- Sun Management Center

-------------------------------------------------------

HEALTH-MONITOR-SUNMANAGEMENTCENTER-MIB DEFINITIONS ::= BEGIN

  IMPORTS

        enterprises, MODULE-IDENTITY, OBJECT-TYPE,  Integer32, Unsigned32

                FROM SNMPv2-SMI

         OBJECT-GROUP

                FROM SNMPv2-CONF

         DisplayString

               FROM SNMPv2-TC;

healthMonitor MODULE-IDENTITY

    LAST-UPDATED "0009181435Z"

    ORGANIZATION "Sun Microsystems Inc."

    CONTACT-INFO

        "        Sun Microsystems Inc.

       Customer Support

            Postal: 901 San Antonio Road

       Palo Alto, CA-94303-4900

    USA

                         Tel: 650-960-1300

                E-mail: [email protected]"

    DESCRIPTION

        "Health Monitor allows to monitor the overall state of the machine,

	including the state of the disk, networks, RAM, and so on.

	This module uses a set of performance rules to determine valid

	component states."

    REVISION  "9907201505Z"

    DESCRIPTION

        "Rev 1.0  20th July 1999 15:05, Initial version Of MIB."

    REVISION  "0009181435Z"

    DESCRIPTION

         "Rev 1.1  18th Sep 2000 14:35. Changed the type of mibnode hmDNLCHits 

          and hmDNLCMisses from Integer32 to Unsigned32."

    ::= { modules 11 }

sun       OBJECT IDENTIFIER ::= { enterprises 42 }

products      OBJECT IDENTIFIER ::= { sun 2 }

sunsymon  OBJECT IDENTIFIER ::= { products 12 }

agent     OBJECT IDENTIFIER ::= { sunsymon 2 }

modules   OBJECT IDENTIFIER ::= { agent 2 }

hmSwap  OBJECT IDENTIFIER ::= { healthMonitor 1 }

hmKernelcontention      OBJECT IDENTIFIER ::= { healthMonitor 2 }

hmNFS   OBJECT IDENTIFIER ::= { healthMonitor 3 }

hmCPU   OBJECT IDENTIFIER ::= { healthMonitor 4 }

hmDiskGroup OBJECT-GROUP

        OBJECTS {  hmDiskName, hmDiskAliasName, hmAvgWaitTransactions, 

		hmDiskBusyPcnt, hmAvgDiskSvcTime }

        STATUS current

        DESCRIPTION

        "Disk related statistics."

        ::= { healthMonitor 5 }

hmRAM   OBJECT IDENTIFIER ::= { healthMonitor 6 }

hmKMEM  OBJECT IDENTIFIER ::= { healthMonitor 7 }

hmDNLC  OBJECT IDENTIFIER ::= { healthMonitor 8 }

hmSwapSpaceGroup OBJECT-GROUP

        OBJECTS { hmAvailableSwapSpace, hmReservedSwapSpace, 

		hmAllocatedSwapSpace, hmUsedSwapSpace }

        STATUS current

        DESCRIPTION

        "Swap space related statistics."

        ::= { hmSwap 1 }

hmAvailableSwapSpace OBJECT-TYPE

    SYNTAX      Integer32

    UNITS       "kB"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The total swap space (in 1024 byte blocks) that is currently

		available for reservation and allocation."

    ::= { hmSwapSpaceGroup 1 }

hmReservedSwapSpace OBJECT-TYPE

    SYNTAX      Integer32

    UNITS       "kB"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The total amount of swap space (in 1024 byte blocks) that is

		not currently allocated, but is claimed by memory mappings for

		possible future use."

    ::= { hmSwapSpaceGroup 2 }

hmAllocatedSwapSpace OBJECT-TYPE

    SYNTAX      Integer32

   UNITS       "kB"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The total amount of swap space (in 1024 byte blocks) 

		currently allocated for use."

    ::= { hmSwapSpaceGroup 3 }

hmUsedSwapSpace OBJECT-TYPE

    SYNTAX      Integer32

    UNITS       "kB"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The total amount of swap space (in 1024 byte blocks) that is 

		either allocated or reserved."

    ::= { hmSwapSpaceGroup 4 }

hmMutexGroup OBJECT-GROUP

        OBJECTS { hmSpinsOnMutexes, hmTotNumOfCPUs }

        STATUS current

        DESCRIPTION

                "Mutex related statistics."

        ::= { hmKernelcontention 1 }

hmSpinsOnMutexes OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Sum of spins on mutexes (lock not  acquired  on first try) 

		for all CPUs."

    ::= { hmMutexGroup 1 }

hmTotNumOfCPUs OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Total number of CPUs."

    ::= { hmMutexGroup 2 }

hmNFSClientRPCGroup OBJECT-GROUP

        OBJECTS { hmTotRPCCalls, hmTotBadRPCCalls, hmTotRPCRetransmissions, 

		hmTotBadRPCReplies, hmTotRPCCallsTimedOut, 

		hmTotNumOfAuthRefresh, hmTotFailedCallsBV, hmTimers, 

		hmTotMemAllocFails, hmTotSendFails }

        STATUS current

        DESCRIPTION

                "Client RPC call-related statistics."

        ::= { hmNFS 1 }

hmTotRPCCalls OBJECT-TYPE

    SYNTAX      DisplayString

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Total number of RPC calls received."

    ::= { hmNFSClientRPCGroup 1 }

hmTotBadRPCCalls OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Total number of calls rejected by the RPC layer."

    ::= { hmNFSClientRPCGroup 2 }

hmTotRPCRetransmissions OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Total number of calls retransmitted due to a timeout."

    ::= { hmNFSClientRPCGroup 3 }

hmTotBadRPCReplies OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of replies from server that do not correspond to 

		any outside call."

    ::= { hmNFSClientRPCGroup 4 }

hmTotRPCCallsTimedOut OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of calls timed out while waiting for a reply from 

		server."

    ::= { hmNFSClientRPCGroup 5 }

hmTotNumOfAuthRefresh OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of times authentication information was refreshed."

    ::= { hmNFSClientRPCGroup 6 }

hmTotFailedCallsBV OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of calls failed due to a bad verifier in response."

    ::= { hmNFSClientRPCGroup 7 }

hmTimers OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of times calculated time-out exceeds minimum 

		specified timeout value for a call."

    ::= { hmNFSClientRPCGroup 8 }

hmTotMemAllocFails OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of failures to allocate memory."

    ::= { hmNFSClientRPCGroup 9 }

hmTotSendFails OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of failures where client is not able to send 

		the packets for any reason."

    ::= { hmNFSClientRPCGroup 10 }

hmCPUProcInStatesGroup OBJECT-GROUP

        OBJECTS { hmTotProcInRunQueue, hmTotProcBlocked, hmTotProcReadyInSwap } 

        STATUS current

        DESCRIPTION

        "Statistics related to the number of processes in different states."

        ::= { hmCPU 1 }

hmTotProcInRunQueue OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of processes in the run queue."

    ::= { hmCPUProcInStatesGroup 1 }

hmTotProcBlocked OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of processes blocked for resources."

    ::= { hmCPUProcInStatesGroup 2 }

hmTotProcReadyInSwap OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of processes runnable but swapped."

    ::= { hmCPUProcInStatesGroup 3 }

hmDiskTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF HmDiskEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

                "Table of information for all the disks installed on 

		the system."

    ::= { hmDiskGroup 1 }

hmDiskEntry OBJECT-TYPE

    SYNTAX      HmDiskEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

                "Monitoring information for one disk on the system."

    INDEX   { hmDiskName }

    ::= { hmDiskTable 1 }

HmDiskEntry ::=

    SEQUENCE {

        hmDiskName

            DisplayString,

        hmDiskAliasName

            DisplayString,

        hmAvgWaitTransactions

            DisplayString,

        hmDiskBusyPcnt

            DisplayString,

        hmAvgDiskSvcTime

            DisplayString

    }

hmDiskName OBJECT-TYPE

    SYNTAX      DisplayString

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Name of the disk."

    ::= { hmDiskEntry 1 }

hmDiskAliasName OBJECT-TYPE

    SYNTAX      DisplayString

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Name of the disk alias (for example, c0t0d0)."

    ::= { hmDiskEntry 2 }

hmAvgWaitTransactions OBJECT-TYPE

    SYNTAX      DisplayString

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Average number of transactions waiting for service."

    ::= { hmDiskEntry 3 }

hmDiskBusyPcnt OBJECT-TYPE

    SYNTAX      DisplayString

    UNITS       "%"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Percent of time the disk is busy."

    ::= { hmDiskEntry 4 }

hmAvgDiskSvcTime OBJECT-TYPE

    SYNTAX      DisplayString

    UNITS       "msec"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Average service time."

    ::= { hmDiskEntry 5 }

hmRamMemoryPagingGroup OBJECT-GROUP

        OBJECTS { hmHandspread, hmPageScanRate } 

        STATUS current

        DESCRIPTION

        "Memory paging-related statistics."

        ::= { hmRAM 1 }

hmHandspread OBJECT-TYPE

    SYNTAX      Integer32

    UNITS       "MB"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The distance (in pages) between front and back pageout 

		daemon hands. The pageout daemon manages two hands on 

		the clock.  The front hand moves through memory, clearing 

		the reference bit, and stealing pages from processes that 

		exceed the value maxrss.  The back hand travels behind the 

		front hand, freeing pages that have not been referenced 

		since the front hand passed. If the pages have been modified, 

		they are pushed to the swap space before being freed. After 

		pageout examines a page of memory, the amount of time that 

		is needed to reclaim the page increases as the distance 

		increases between the two hands, and decreases as the scan 

		rate rises."

    ::= { hmRamMemoryPagingGroup 1 }

hmPageScanRate OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Number of pages scanned per second."

    ::= { hmRamMemoryPagingGroup 2 }

hmKmemStatisticsGroup OBJECT-GROUP

        OBJECTS { hmKmemErrors, hmKmemFreeMem } 

        STATUS current

        DESCRIPTION

                "Kernel-memory-related statistics."

        ::= { hmKMEM 1 }

hmKmemErrors OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Total number of error occured related to kernel memory.  

		These errors may be..

		KMERR_MODIFIED: buffer modified after being fread

		KMERR_READZONE:	readzone violation, write past end of buffer

		KMERR_BADADDR: invalid free

		KMERR_DUPFREE: duplicate free

		KMERR_BADBUFTAG: boundary tag corrupted

		etc."

    ::= { hmKmemStatisticsGroup 1 }

hmKmemFreeMem OBJECT-TYPE

    SYNTAX      Integer32

    UNITS       "MB"

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "Total amount of free kernel memory in MB."

    ::= { hmKmemStatisticsGroup 2 }

hmDNLCStatGroup OBJECT-GROUP

        OBJECTS { hmDNLCHits, hmDNLCMisses, hmDNLCHitRate, hmDNLCRefRate } 

        STATUS current

        DESCRIPTION

                "DNLC related statistics."

        ::= { hmDNLC 1 }

hmDNLCHits OBJECT-TYPE

    SYNTAX      Unsigned32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The number of times a name is looked up and is found in DNLC 

		(Directory Name Lookup Cache)."

    ::= { hmDNLCStatGroup 1 }

hmDNLCMisses OBJECT-TYPE

    SYNTAX      Unsigned32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The number of times a name is looked up and is not found in DNLC 

		(Directory Name Lookup Cache). "

    ::= { hmDNLCStatGroup 2 }

hmDNLCHitRate OBJECT-TYPE

    SYNTAX      Unsigned32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The number of DNLC hits as a proportion of all DNLC lookups."

    ::= { hmDNLCStatGroup 3 }

hmDNLCRefRate OBJECT-TYPE

    SYNTAX      Unsigned32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

                "The number of times per second, the DNLC is looked up."

    ::= { hmDNLCStatGroup 4 }

END