# Copyright (c) 2014, Oracle and/or its affiliates. All rights reserved.

#

#    Licensed under the Apache License, Version 2.0 (the "License"); you may

#    not use this file except in compliance with the License. You may obtain

#    a copy of the License at

#

#         http://www.apache.org/licenses/LICENSE-2.0

#

#    Unless required by applicable law or agreed to in writing, software

#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT

#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the

#    License for the specific language governing permissions and limitations

#    under the License.

"""

ZFS Storage Appliance Cinder Volume Driver

"""

import base64

from cinder import exception

from cinder.openstack.common import log

from cinder.volume import driver

from oslo.config import cfg

from cinder.volume.drivers.zfssa import zfssarest

CONF = cfg.CONF

LOG = log.getLogger(__name__)

ZFSSA_OPTS = [

    cfg.StrOpt('zfssa_host', required=True,

               help='ZFSSA management IP address'),

    cfg.StrOpt('zfssa_auth_user', required=True, secret=True,

               help='ZFSSA management authorized user\'s name'),

    cfg.StrOpt('zfssa_auth_password', required=True, secret=True,

               help='ZFSSA management authorized user\'s password'),

    cfg.StrOpt('zfssa_pool', required=True,

               help='ZFSSA storage pool name'),

    cfg.StrOpt('zfssa_project', required=True,

               help='ZFSSA project name'),

    cfg.StrOpt('zfssa_lun_volblocksize', default='8k',

               help='Block size: 512, 1k, 2k, 4k, 8k, 16k, 32k, 64k, 128k'),

    cfg.BoolOpt('zfssa_lun_sparse', default=False,

                help='Flag to enable sparse (thin-provisioned): True, False'),

    cfg.StrOpt('zfssa_lun_compression', default='',

               help='Data compression-off, lzjb, gzip-2, gzip, gzip-9'),

    cfg.StrOpt('zfssa_lun_logbias', default='',

               help='Synchronous write bias-latency, throughput'),

    cfg.StrOpt('zfssa_initiator_group', default='',

               help='iSCSI initiator group'),

    cfg.StrOpt('zfssa_initiator', default='',

               help='iSCSI initiator IQNs (comma separated)'),

    cfg.StrOpt('zfssa_initiator_user', default='',

               help='iSCSI initiator CHAP user'),

    cfg.StrOpt('zfssa_initiator_password', default='',

               help='iSCSI initiator CHAP password'),

    cfg.StrOpt('zfssa_target_group', default='tgt-grp',

               help='iSCSI target group name'),

    cfg.StrOpt('zfssa_target_user', default='',

               help='iSCSI target CHAP user'),

    cfg.StrOpt('zfssa_target_password', default='',

               help='iSCSI target CHAP password'),

    cfg.StrOpt('zfssa_target_portal', required=True,

               help='iSCSI target portal (Data-IP:Port, w.x.y.z:3260)'),

    cfg.StrOpt('zfssa_target_interfaces', required=True,

               help='Network interfaces of iSCSI targets (comma separated)')

]

CONF.register_opts(ZFSSA_OPTS)

SIZE_GB = 1073741824

#pylint: disable=R0904

class ZFSSAISCSIDriver(driver.ISCSIDriver):

    """ZFSSA Cinder volume driver"""

    VERSION = '1.0.0'

    protocol = 'iSCSI'

    def __init__(self, *args, **kwargs):

        super(ZFSSAISCSIDriver, self).__init__(*args, **kwargs)

        self.configuration.append_config_values(ZFSSA_OPTS)

        self.zfssa = None

        self._stats = None

    def _get_target_alias(self):

        """return target alias"""

        return self.configuration.zfssa_target_group

    def do_setup(self, context):

        """Setup - create project, initiators, initiatorgroup, target,

                   targetgroup

        """

        self.configuration._check_required_opts()

        lcfg = self.configuration

        LOG.info('Connecting to host: %s' % lcfg.zfssa_host)

        self.zfssa = zfssarest.ZFSSAApi(lcfg.zfssa_host)

        auth_str = base64.encodestring('%s:%s' %

                                       (lcfg.zfssa_auth_user,

                                        lcfg.zfssa_auth_password))[:-1]

        self.zfssa.login(auth_str)

        self.zfssa.create_project(lcfg.zfssa_pool, lcfg.zfssa_project,

                                  compression=lcfg.zfssa_lun_compression,

                                  logbias=lcfg.zfssa_lun_logbias)

        if (lcfg.zfssa_initiator != '' and

            (lcfg.zfssa_initiator_group == '' or

             lcfg.zfssa_initiator_group == 'default')):

            LOG.warning('zfssa_initiator= %s wont be used on \

                        zfssa_initiator_group= %s' %

                        (lcfg.zfssa_initiator,

                         lcfg.zfssa_initiator_group))

        # Setup initiator and initiator group

        if lcfg.zfssa_initiator != '' and \

           lcfg.zfssa_initiator_group != '' and \

           lcfg.zfssa_initiator_group != 'default':

            for initiator in lcfg.zfssa_initiator.split(','):

                self.zfssa.create_initiator(initiator,

                                            lcfg.zfssa_initiator_group + '-' +

                                            initiator,

                                            chapuser=

                                            lcfg.zfssa_initiator_user,

                                            chapsecret=

                                            lcfg.zfssa_initiator_password)

                self.zfssa.add_to_initiatorgroup(initiator,

                                                 lcfg.zfssa_initiator_group)

        # Parse interfaces

        interfaces = []

        for interface in lcfg.zfssa_target_interfaces.split(','):

            if interface == '':

                continue

            interfaces.append(interface)

        # Setup target and target group

        iqn = self.zfssa.create_target(

            self._get_target_alias(),

            interfaces,

            tchapuser=lcfg.zfssa_target_user,

            tchapsecret=lcfg.zfssa_target_password)

        self.zfssa.add_to_targetgroup(iqn, lcfg.zfssa_target_group)

    def check_for_setup_error(self):

        """Check that driver can login and pool, project, initiators,

           initiatorgroup, target, targetgroup exist

        """

        lcfg = self.configuration

        self.zfssa.verify_pool(lcfg.zfssa_pool)

        self.zfssa.verify_project(lcfg.zfssa_pool, lcfg.zfssa_project)

        if lcfg.zfssa_initiator != '' and \

           lcfg.zfssa_initiator_group != '' and \

           lcfg.zfssa_initiator_group != 'default':

            for initiator in lcfg.zfssa_initiator.split(','):

                self.zfssa.verify_initiator(initiator)

            self.zfssa.verify_target(self._get_target_alias())

    def _get_provider_info(self, volume):

        """return provider information"""

        lcfg = self.configuration

        lun = self.zfssa.get_lun(lcfg.zfssa_pool,

                                 lcfg.zfssa_project, volume['name'])

        iqn = self.zfssa.get_target(self._get_target_alias())

        loc = "%s %s %s" % (lcfg.zfssa_target_portal, iqn, lun['number'])

        LOG.debug('_export_volume: provider_location: %s' % loc)

        provider = {'provider_location': loc}

        if lcfg.zfssa_target_user != '' and lcfg.zfssa_target_password != '':

            provider['provider_auth'] = 'CHAP %s %s' % \

                                        (lcfg.zfssa_target_user,

                                         lcfg.zfssa_target_password)

        return provider

    def create_volume(self, volume):

        """Create a volume on ZFSSA"""

        LOG.debug('zfssa.create_volume: volume=' + volume['name'])

        lcfg = self.configuration

        volsize = str(volume['size']) + 'g'

        self.zfssa.create_lun(lcfg.zfssa_pool,

                              lcfg.zfssa_project,

                              volume['name'],

                              volsize,

                              targetgroup=lcfg.zfssa_target_group,

                              volblocksize=lcfg.zfssa_lun_volblocksize,

                              sparse=lcfg.zfssa_lun_sparse,

                              compression=lcfg.zfssa_lun_compression,

                              logbias=lcfg.zfssa_lun_logbias)

        return self._get_provider_info(volume)

    def delete_volume(self, volume):

        """Deletes a volume with the given volume['name']."""

        LOG.debug('zfssa.delete_volume: name=' + volume['name'])

        lcfg = self.configuration

        lun2del = self.zfssa.get_lun(lcfg.zfssa_pool,

                                     lcfg.zfssa_project,

                                     volume['name'])

        """Delete clone's temp snapshot. see create_cloned_volume()"""

        """clone is deleted as part of the snapshot delete."""

        tmpsnap = 'tmp-snapshot-%s' % volume['id']

        if 'origin' in lun2del and lun2del['origin']['snapshot'] == tmpsnap:

            self.zfssa.delete_snapshot(lcfg.zfssa_pool,

                                       lcfg.zfssa_project,

                                       lun2del['origin']['share'],

                                       lun2del['origin']['snapshot'])

            return

        self.zfssa.delete_lun(pool=lcfg.zfssa_pool,

                              project=lcfg.zfssa_project,

                              lun=volume['name'])

    def create_snapshot(self, snapshot):

        """Creates a snapshot with the given snapshot['name'] of the

           snapshot['volume_name']

        """

        LOG.debug('zfssa.create_snapshot: snapshot=' + snapshot['name'])

        lcfg = self.configuration

        self.zfssa.create_snapshot(lcfg.zfssa_pool,

                                   lcfg.zfssa_project,

                                   snapshot['volume_name'],

                                   snapshot['name'])

    def delete_snapshot(self, snapshot):

        """Deletes a snapshot."""

        LOG.debug('zfssa.delete_snapshot: snapshot=' + snapshot['name'])

        lcfg = self.configuration

        has_clones = self.zfssa.has_clones(lcfg.zfssa_pool,

                                           lcfg.zfssa_project,

                                           snapshot['volume_name'],

                                           snapshot['name'])

        if has_clones:

            LOG.error('snapshot %s: has clones' % snapshot['name'])

            raise exception.SnapshotIsBusy(snapshot_name=snapshot['name'])

        self.zfssa.delete_snapshot(lcfg.zfssa_pool,

                                   lcfg.zfssa_project,

                                   snapshot['volume_name'],

                                   snapshot['name'])

    def create_volume_from_snapshot(self, volume, snapshot):

        """Creates a volume from a snapshot - clone a snapshot"""

        LOG.debug('zfssa.create_volume_from_snapshot: volume=' +

                  volume['name'])

        LOG.debug('zfssa.create_volume_from_snapshot: snapshot=' +

                  snapshot['name'])

        if not self._verify_clone_size(snapshot, volume['size'] * SIZE_GB):

            exception_msg = (_('Error verifying clone size on '

                               'Volume clone: %(clone)s '

                               'Size: %(size)d on'

                               'Snapshot: %(snapshot)s')

                             % {'clone': volume['name'],

                                'size': volume['size'],

                                'snapshot': snapshot['name']})

            LOG.error(exception_msg)

            raise exception.InvalidInput(reason=exception_msg)

        lcfg = self.configuration

        self.zfssa.clone_snapshot(lcfg.zfssa_pool,

                                  lcfg.zfssa_project,

                                  snapshot['volume_name'],

                                  snapshot['name'],

                                  volume['name'])

    def _update_volume_status(self):

        """Retrieve status info from volume group."""

        LOG.debug("Updating volume status")

        self._stats = None

        data = {}

        data["volume_backend_name"] = self.__class__.__name__

        data["vendor_name"] = 'Oracle'

        data["driver_version"] = self.VERSION

        data["storage_protocol"] = self.protocol

        lcfg = self.configuration

        (avail, used) = self.zfssa.get_pool_stats(lcfg.zfssa_pool)

        if avail is None or used is None:

            return

        total = int(avail) + int(used)

        if lcfg.zfssa_lun_sparse:

            data['total_capacity_gb'] = 'infinite'

        else:

            data['total_capacity_gb'] = total / SIZE_GB

        data['free_capacity_gb'] = int(avail) / SIZE_GB

        data['reserved_percentage'] = 0

        data['QoS_support'] = False

        self._stats = data

    def get_volume_stats(self, refresh=False):

        """Get volume status.

           If 'refresh' is True, run update the stats first.

        """

        if refresh:

            self._update_volume_status()

        return self._stats

    def _export_volume(self, volume):

        """Export the volume - set the initiatorgroup property."""

        LOG.debug('_export_volume: volume name: %s' % volume['name'])

        lcfg = self.configuration

        self.zfssa.set_lun_initiatorgroup(lcfg.zfssa_pool,

                                          lcfg.zfssa_project,

                                          volume['name'],

                                          lcfg.zfssa_initiator_group)

        return self._get_provider_info(volume)

    def create_export(self, context, volume):

        """Driver entry point to get the  export info for a new volume."""

        LOG.debug('create_export: volume name: %s' % volume['name'])

        return self._export_volume(volume)

    def remove_export(self, context, volume):

        """Driver entry point to remove an export for a volume."""

        LOG.debug('remove_export: volume name: %s' % volume['name'])

        lcfg = self.configuration

        self.zfssa.set_lun_initiatorgroup(lcfg.zfssa_pool,

                                          lcfg.zfssa_project,

                                          volume['name'],

                                          '')

    def ensure_export(self, context, volume):

        """Driver entry point to get the export info for an existing volume."""

        LOG.debug('ensure_export: volume name: %s' % volume['name'])

        return self._export_volume(volume)

    def copy_image_to_volume(self, context, volume, image_service, image_id):

        self.ensure_export(context, volume)

        super(ZFSSAISCSIDriver, self).copy_image_to_volume(

            context, volume, image_service, image_id)

    def extend_volume(self, volume, new_size):

        """Driver entry point to extent volume size."""

        LOG.debug('extend_volume: volume name: %s' % volume['name'])

        lcfg = self.configuration

        self.zfssa.set_lun_size(lcfg.zfssa_pool,

                                lcfg.zfssa_project,

                                volume['name'],

                                new_size * SIZE_GB)

    def create_cloned_volume(self, volume, src_vref):

        """Create a clone of the specified volume."""

        zfssa_snapshot = {'volume_name': src_vref['name'],

                          'name': 'tmp-snapshot-%s' % volume['id']}

        self.create_snapshot(zfssa_snapshot)

        try:

            self.create_volume_from_snapshot(volume, zfssa_snapshot)

        except exception.VolumeBackendAPIException:

            LOG.error("Clone Volume '%s' failed from source volume '%s'"

                      % (volume['name'], src_vref['name']))

            # Cleanup snapshot

            self.delete_snapshot(zfssa_snapshot)

    def local_path(self, volume):

        """Not implemented"""

        pass

    def backup_volume(self, context, backup, backup_service):

        """Not implemented"""

        pass

    def restore_backup(self, context, backup, volume, backup_service):

        """Not implemented"""

        pass

    def _verify_clone_size(self, snapshot, size):

        """Check whether the clone size is the same as the parent volume"""

        lcfg = self.configuration

        lun = self.zfssa.get_lun(lcfg.zfssa_pool,

                                 lcfg.zfssa_project,

                                 snapshot['volume_name'])

        return (lun['size'] == size)