#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.

#

include ../../../make-rules/shared-macros.mk

PATH=/usr/bin:/usr/gnu/bin:/usr/sbin

COMPONENT_NAME=		Python

COMPONENT_VERSION=	2.7.10

COMPONENT_PROJECT_URL=	http://python.org/

COMPONENT_SRC=		$(COMPONENT_NAME)-$(COMPONENT_VERSION)

COMPONENT_ARCHIVE=	$(COMPONENT_SRC).tar.xz

COMPONENT_ARCHIVE_HASH=	\

    sha256:1cd3730781b91caf0fa1c4d472dc29274186480161a150294c42ce9b5c5effc0

COMPONENT_ARCHIVE_URL=	$(COMPONENT_PROJECT_URL)ftp/python/$(COMPONENT_VERSION)/$(COMPONENT_ARCHIVE)

COMPONENT_SIG_URL=	$(COMPONENT_ARCHIVE_URL).asc

COMPONENT_BUGDB=	utility/python

TPNO=			22891

include $(WS_MAKE_RULES)/prep.mk

include $(WS_MAKE_RULES)/configure.mk

include $(WS_MAKE_RULES)/ips.mk

include $(WS_MAKE_RULES)/lint-libraries.mk

# Need to preserve timestamp for Grammar files.  If the pickle files are older, 

# Python will try to rebuild them.  

PKGSEND_PUBLISH_OPTIONS += -T \*Grammar\*.txt

PKGSEND_PUBLISH_OPTIONS += -T \*Grammar\*.pickle

# We patch auto* files, so regenerate headers and configure

COMPONENT_PREP_ACTION = \

	(cd $(@D) ; autoheader ; autoconf)

# we don't want to leak $(CC_BITS) into BASECFLAGS as it causes problems with

# python-config

CC +=	$(CFLAGS)

C99MODE=

CPPFLAGS +=	-IPython

# to find the ncurses headers

CPPFLAGS +=	-I/usr/include/ncurses

# enable large files how they did in JDS

CPPFLAGS +=	-D_LARGEFILE64_SOURCE

# libffi for _ctypes

CPPFLAGS +=	$(shell pkg-config --cflags-only-I libffi)

# because python links with $(CC) ... $(LDFLAGS) ...

LDFLAGS =	$(CC_BITS) $(CC_PIC)

# build pic

CFLAGS +=	$(CC_PIC)

# The python build is profile-guided for studio; to see the benefits of that,

# Python must be compiled with -xO5 and a different build target must be used.

# Use of xprofile requires that the same options be used during compilation and

# linking.  The targets chosen are based on Solaris 11 minimum supported system

# requirements.

COMPONENT_BUILD_TARGETS = profile-opt

XPROFILE_DIR = $(BUILD_DIR_$(BITS))/.profile

PYFLAGS.i386 = -xtarget=opteron -xarch=sse2 -xcache=generic

PYFLAGS.sparc =

CFLAGS += -xO5 $(PYFLAGS.$(MACH))

LDFLAGS += -xO5 $(PYFLAGS.$(MACH))

# Python puts its header files in a special place.

LINT_FLAGS +=	-I$(SOURCE_DIR)/Include

# PYTHONPATH in the environment can be harmful, but setting it to empty via

# _INSTALL_ENV causes problems too, so just ignore the entire environment.

# Because of this, we need to specify PATH in multiple places below.

ENV +=				-i

CONFIGURE_ENV +=		PATH="$(PATH)"

CONFIGURE_OPTIONS  +=		--infodir=$(CONFIGURE_INFODIR)

CONFIGURE_OPTIONS  +=		--enable-shared

CONFIGURE_OPTIONS  +=		--with-system-expat

CONFIGURE_OPTIONS  +=		--with-system-ffi

CONFIGURE_OPTIONS  +=		--without-gcc

CONFIGURE_OPTIONS  +=		--enable-ipv6

CONFIGURE_OPTIONS  +=		CPPFLAGS="$(CPPFLAGS)"

CONFIGURE_OPTIONS  +=		LDFLAGS="$(LDFLAGS)"

CONFIGURE_OPTIONS  +=		CFLAGS="$(CFLAGS)"

CONFIGURE_OPTIONS  +=		DFLAGS="-$(BITS)"

CONFIGURE_OPTIONS  +=		XPROFILE_DIR="$(XPROFILE_DIR)"

COMPONENT_BUILD_ENV  +=		PATH="$(PATH)"

COMPONENT_BUILD_ENV  +=		DFLAGS="-$(BITS)"

COMPONENT_BUILD_ENV  +=		XPROFILE_DIR="$(XPROFILE_DIR)"

# 64 bit shared objects need to go in a 64-bit directory

COMPONENT_INSTALL_ARGS.64 += DESTSHARED=$(CONFIGURE_PREFIX)/lib/python2.7/lib-dynload

# Simplify the definitions of CC, CXX, CFLAGS and LDFLAGS so they hard-code

# neither paths from our build systems nor Studio-specific options.

COMPONENT_PRE_INSTALL_ACTION= \

            (cd $(@D) ; $(GSED) -i -e 's/^CC=.*/CC=\t\tcc/' \

		-e 's/^CXX=.*/CXX=\t\tCC/' \

		-e 's/^CFLAGS=.*/CFLAGS=\t\t\$$\(BASECFLAGS) \$$\(OPT) \$$\(EXTRA_CFLAGS)/' \

		-e 's|^LDFLAGS=.*|LDFLAGS=|' \

		Makefile)

# Because we stripped the Makefile above, we need to pass several things in the

# environment, and use -e to tell gmake to pay attention to the environment.

COMPONENT_INSTALL_ENV +=	CC="$(CC)"

COMPONENT_INSTALL_ENV +=	CXX="$(CXX)"

COMPONENT_INSTALL_ENV +=	CFLAGS="$(CFLAGS)"

COMPONENT_INSTALL_ENV +=	LDFLAGS="$(LDFLAGS)"

COMPONENT_INSTALL_ENV +=	PATH="$(PATH)"

COMPONENT_INSTALL_ARGS +=	-e

# 1. Setup pyconfig.h file to support 32 & 64 bit.

# 2. If the /usr/lib/python2.7/lib2to3/*.pickle files are older than the

#    related *.txt files in the same directory, it will rebuild them any time

#    you try to build a Python module.  So here we also touch the pickle files

#    to avoid this.

# 3. Strip build machine paths from _sysconfigdata.py & config/Makefile.

#    Note that although the 64-bit version is not used (and thus commented

#    out in the manifest), we still need to specify the 32-/64-bit paths,

#    otherwise the 64-bit build will fail to find the 32-bit path.

# 4. (Re)compile _sysconfigdata.py since we just updated it.

CONFIG_MAKEFILE.32=	lib/python2.7/config/Makefile

CONFIG_MAKEFILE.64=	lib/$(MACH64)/python2.7/config/Makefile

CONFIG_MAKEFILE=	$(CONFIG_MAKEFILE.$(BITS))

COMPONENT_POST_INSTALL_ACTION= \

            (cd $(PROTOUSRDIR) ;  \

             $(MV) include/python2.7/pyconfig.h include/python2.7/pyconfig-$(BITS).h ; \

             $(TOUCH) lib/python2.7/lib2to3/*.pickle ; \

	     $(GSED) -i -e 's|$(SOURCE_DIR)|.|g' -e 's|$(COMPONENT_DIR)|..|g' \

		-e 's|$(SPRO_VROOT)/bin/||g' lib/python2.7/_sysconfigdata.py \

		$(CONFIG_MAKEFILE); \

	     $(PYTHON.2.7) -m py_compile lib/python2.7/_sysconfigdata.py)

ASLR_MODE = $(ASLR_ENABLE)

# common targets

$(INSTALL_32):  $(INSTALL_64)

configure:	$(CONFIGURE_32_and_64)

build:		$(BUILD_32_and_64)

install:	$(INSTALL_32_and_64)

# Using "-uall,-network" ensures all tests are run except the network tests.

# The network tests contain many expected failures when run behind a firewall.

# The "-v" ensures verbose mode.  You can set TESTOPTS_PYTHON_TEST to a

# particular test if you want to run just one test.  For example, run gmake with

# "-k" so it continues and does both 32-bit and 64-bit tests, even if there is a

# failure, like this:

# $ TESTOPTS_PYTHON_TEST=test_sys gmake -k test

# Note that when a test succeeds, the builds/*/.tested file gets created.  You

# may need to remove these files, or run "gmake clobber" or "gmake clean"

# between tests.

#

COMPONENT_TEST_ENV = EXTRATESTOPTS="-v -uall,-network $(TESTOPTS_PYTHON_TEST)"

# The distutils tests need $CC in $PATH.

COMPONENT_TEST_ENV += PATH="$(SPRO_VROOT)/bin:$(PATH)"

COMPONENT_TEST_TARGETS = test

# The test output contains details from each test, in whatever order they

# complete.  The default _TRANSFORMER is not powerful enough to deal with

# this; we need heavier artillery.  Extract just the sections that start

# with "tests OK." and end with "make: " for comparison.

COMPONENT_TEST_TRANSFORMER =	$(NAWK)

COMPONENT_TEST_TRANSFORMS =	"'/tests OK./ {results = 1}; /make: / {results = 0} {if (results) print $0 } '"

test:				$(TEST_32_and_64)

system-test:    $(SYSTEM_TESTS_NOT_IMPLEMENTED)

REQUIRED_PACKAGES += compress/bzip2

REQUIRED_PACKAGES += database/sqlite-3

REQUIRED_PACKAGES += developer/library/xprofile

REQUIRED_PACKAGES += library/database/gdbm

REQUIRED_PACKAGES += library/expat

REQUIRED_PACKAGES += library/libffi

REQUIRED_PACKAGES += library/ncurses

REQUIRED_PACKAGES += library/python/pip-27

REQUIRED_PACKAGES += library/readline

REQUIRED_PACKAGES += library/security/openssl

REQUIRED_PACKAGES += library/zlib

REQUIRED_PACKAGES += runtime/tcl-8

REQUIRED_PACKAGES += runtime/tk-8

REQUIRED_PACKAGES += shell/ksh93

REQUIRED_PACKAGES += system/core-os

REQUIRED_PACKAGES += system/library

REQUIRED_PACKAGES += system/library/math

REQUIRED_PACKAGES += system/linker

REQUIRED_PACKAGES += x11/library/libx11