--- a/components/lftp/patches/lftp.1.patch Tue Oct 27 10:31:06 2015 -0700
+++ b/components/lftp/patches/lftp.1.patch Tue Oct 27 13:49:55 2015 -0700
@@ -1,20 +1,19 @@
- Solaris specific documentation change.
- Solaris tbl(1) won't handle 'x' suffix.
-- Man page category change.
---- doc/lftp.1 Tue Jun 28 02:36:24 2011
-+++ doc/lftp.1 Thu Jul 14 06:55:30 2011
-@@ -68,8 +68,7 @@
+--- doc/lftp.1 2015-10-14 14:44:17.423356916 -0700
++++ doc/lftp.1 2015-10-14 14:47:00.443113545 -0700
+@@ -67,8 +67,7 @@ will connect to that site otherwise a co
the open command.
.PP
- \fBlftp\fP can handle several file access methods - ftp, ftps, http, https,
--hftp, fish, sftp and file (https and ftps are only available when lftp is
+ \fBlftp\fP can handle several file access methods - FTP, FTPS, HTTP, HTTPS,
+-HFTP, FISH, SFTP and file (HTTPS and FTPS are only available when lftp is
-compiled with GNU TLS or OpenSSL library). You can specify the method to use in `open
-+hftp, fish, sftp and file. You can specify the method to use in `open
- URL' command, e.g. `open http://www.us.kernel.org/pub/linux'. hftp is
- ftp-over-http-proxy protocol. It can be used automatically instead of ftp
++HFTP, FISH, SFTP and file. You can specify the method to use in `open
+ URL' command, e.g. `open http://www.us.kernel.org/pub/linux'. HFTP is
+ ftp-over-http-proxy protocol. It can be used automatically instead of FTP
if ftp:proxy is set to `http://proxy[:port]'. Fish is a protocol working
-@@ -164,7 +163,7 @@
+@@ -167,7 +166,7 @@ any command that accepts input URLs usin
.Sp
.in +0.5i
.TS
@@ -23,7 +22,7 @@
add <name> [<loc>] T{
add current place or given location to bookmarks and bind to given name
T}
-@@ -182,7 +181,7 @@
+@@ -185,7 +184,7 @@ The following subcommands are recognized
.Sp
.in +0.5i
.TS
@@ -32,7 +31,25 @@
stat print cache status (default)
on|off turn on/off caching
flush flush cache
-@@ -292,7 +291,7 @@
+@@ -226,7 +225,7 @@ and outputs the information according to
+ .Sp
+ .in +0.5i
+ .TS
+-l1 l lx .
++l1 l l .
+ \-1 single-column output
+ \-a, \-\-all show dot files
+ \-B, \-\-basename show basename of files only
+@@ -345,7 +344,7 @@ of this command. Options:
+ .Sp
+ .in +0.5i
+ .TS
+-l1 l lx .
++l1 l l .
+ \-d \fIMD\fP, \-\-max\-depth=\fIMD\fP specify maximum scan depth
+ \-l, \-\-list use long listing format
+ .TE
+@@ -377,7 +376,7 @@ instances of \fIrfile\fP (and \-o \fIlfi
.Sp
.in +0.5i
.TS
@@ -40,8 +57,8 @@
+l l .
\-c continue, reget
\-E delete source files after successful transfer
- \-a use ascii mode (binary is the default)
-@@ -318,7 +317,7 @@
+ \-e delete target file before the transfer
+@@ -404,7 +403,7 @@ Transfer a single file. Options:
.Sp
.in +0.5i
.TS
@@ -50,7 +67,7 @@
\-o <lfile> T{
destination file name (default - basename of rfile)
T}
-@@ -343,7 +342,7 @@
+@@ -429,7 +428,7 @@ Glob given patterns containing metachara
.Sp
.in +0.5i
.TS
@@ -59,7 +76,16 @@
\-f plain files (default)
\-d directories
\-a all types
-@@ -413,7 +412,7 @@
+@@ -458,7 +457,7 @@ Options:
+ .Sp
+ .in +0.5i
+ .TS
+-l lx .
++l l .
+ \-v verbose, several \-v increase verbosity
+ \-r list just one specified job without recursion
+ .TE
+@@ -517,7 +516,7 @@ Gets selected files with expanded wildca
.Sp
.in +0.5i
.TS
@@ -68,7 +94,7 @@
\-c continue, reget.
\-d T{
create directories the same as file names and get the files into them instead of current directory.
-@@ -436,7 +435,7 @@
+@@ -540,7 +539,7 @@ directory name. Source and/or target can
.Sp
.in +0.5i
.TS
@@ -77,7 +103,7 @@
\-c, \-\-continue T{
continue a mirror job if possible
T}
-@@ -620,7 +619,7 @@
+@@ -768,7 +767,7 @@ local name as remote one. This can be ch
.Sp
.in +0.5i
.TS
@@ -86,7 +112,7 @@
\-c continue, reput
\-d T{
create directories the same as in file names and put the files into them instead of current directory
-@@ -668,7 +667,7 @@
+@@ -816,7 +815,7 @@ Options:
.Sp
.in +0.5i
.TS
@@ -95,7 +121,7 @@
\-c T{
continue transfer. Requires \fIlfile.lftp-pget-status\fP file.
T}
-@@ -690,7 +689,7 @@
+@@ -838,7 +837,7 @@ of \fIlfile\fP is used as remote name. D
.Sp
.in +0.5i
.TS
@@ -104,7 +130,7 @@
\-o <rfile> T{
specifies remote file name (default - basename of lfile)
T}
-@@ -745,7 +744,7 @@
+@@ -893,7 +892,7 @@ destination is given.
.Sp
.in +0.5i
.TS
@@ -113,7 +139,7 @@
\-q Be quiet.
\-v Be verbose.
\-Q T{
-@@ -766,7 +765,7 @@
+@@ -914,7 +913,7 @@ Examples:
.Sp
.in +0.5i
.TS
@@ -122,7 +148,7 @@
queue \-d 3 Delete the third item in the queue.
queue \-m 6 4 T{
Move the sixth item in the queue before the fourth.
-@@ -829,7 +828,7 @@
+@@ -977,7 +976,7 @@ Default delay is one second, default com
.Sp
.in +0.5i
.TS
@@ -131,7 +157,7 @@
\-c <count> maximum number of iterations
\-d <delay> delay between iterations
\-\-while\-ok stop when command exits with non-zero code
-@@ -876,7 +875,7 @@
+@@ -1024,7 +1023,7 @@ It can be changed by options:
.Sp
.in +0.5i
.TS
@@ -140,7 +166,7 @@
\-a list all settings, including default values
\-d list only default values, not necessary current ones
.TE
-@@ -934,7 +933,7 @@
+@@ -1083,7 +1082,7 @@ Options:
.Sp
.in +0.5i
.TS
@@ -149,7 +175,7 @@
\-O <directory> T{
specifies base directory where files should be placed
T}
-@@ -1130,7 +1129,7 @@
+@@ -1354,7 +1353,7 @@ The following escapes are supported:
.Sp
.in +0.5i
.TS
@@ -158,12 +184,3 @@
\\a bell
\\e escape
\\n new line
-@@ -1996,7 +1995,7 @@
- password is used.
-
- .SH SEE ALSO
--.BR ftpd (8),\ ftp (1)
-+.BR ftpd (1M),\ ftp (1)
- .br
- RFC854 (telnet),
- RFC959 (ftp),