--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/components/openssl/openssl-fips/inline-t4/sparct4-mont.pl Wed Nov 02 19:15:09 2016 -0700
@@ -0,0 +1,1223 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by David S. Miller <[email protected]> and Andy Polyakov
+# <[email protected]>. The module is licensed under 2-clause BSD
+# license. November 2012. All rights reserved.
+# ====================================================================
+
+######################################################################
+# Montgomery squaring-n-multiplication module for SPARC T4.
+#
+# The module consists of three parts:
+#
+# 1) collection of "single-op" subroutines that perform single
+# operation, Montgomery squaring or multiplication, on 512-,
+# 1024-, 1536- and 2048-bit operands;
+# 2) collection of "multi-op" subroutines that perform 5 squaring and
+# 1 multiplication operations on operands of above lengths;
+# 3) fall-back and helper VIS3 subroutines.
+#
+# RSA sign is dominated by multi-op subroutine, while RSA verify and
+# DSA - by single-op. Special note about 4096-bit RSA verify result.
+# Operands are too long for dedicated hardware and it's handled by
+# VIS3 code, which is why you don't see any improvement. It's surely
+# possible to improve it [by deploying 'mpmul' instruction], maybe in
+# the future...
+#
+# Performance improvement.
+#
+# 64-bit process, VIS3:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000628s 0.000028s 1592.4 35434.4
+# rsa 2048 bits 0.003282s 0.000106s 304.7 9438.3
+# rsa 4096 bits 0.025866s 0.000340s 38.7 2940.9
+# dsa 1024 bits 0.000301s 0.000332s 3323.7 3013.9
+# dsa 2048 bits 0.001056s 0.001233s 946.9 810.8
+#
+# 64-bit process, this module:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000256s 0.000016s 3904.4 61411.9
+# rsa 2048 bits 0.000946s 0.000029s 1056.8 34292.7
+# rsa 4096 bits 0.005061s 0.000340s 197.6 2940.5
+# dsa 1024 bits 0.000176s 0.000195s 5674.7 5130.5
+# dsa 2048 bits 0.000296s 0.000354s 3383.2 2827.6
+#
+######################################################################
+# 32-bit process, VIS3:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000665s 0.000028s 1504.8 35233.3
+# rsa 2048 bits 0.003349s 0.000106s 298.6 9433.4
+# rsa 4096 bits 0.025959s 0.000341s 38.5 2934.8
+# dsa 1024 bits 0.000320s 0.000341s 3123.3 2929.6
+# dsa 2048 bits 0.001101s 0.001260s 908.2 793.4
+#
+# 32-bit process, this module:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000301s 0.000017s 3317.1 60240.0
+# rsa 2048 bits 0.001034s 0.000030s 966.9 33812.7
+# rsa 4096 bits 0.005244s 0.000341s 190.7 2935.4
+# dsa 1024 bits 0.000201s 0.000205s 4976.1 4879.2
+# dsa 2048 bits 0.000328s 0.000360s 3051.1 2774.2
+#
+# 32-bit code is prone to performance degradation as interrupt rate
+# dispatched to CPU executing the code grows. This is because in
+# standard process of handling interrupt in 32-bit process context
+# upper halves of most integer registers used as input or output are
+# zeroed. This renders result invalid, and operation has to be re-run.
+# If CPU is "bothered" with timer interrupts only, the penalty is
+# hardly measurable. But in order to mitigate this problem for higher
+# interrupt rates contemporary Linux kernel recognizes biased stack
+# even in 32-bit process context and preserves full register contents.
+# See http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=517ffce4e1a03aea979fe3a18a3dd1761a24fafb
+# for details.
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "sparcv9_modes.pl";
+
+$code.=<<___;
+#include "sparc_arch.h"
+#include <openssl/fipssyms.h>
+
+#ifdef __arch64__
+.register %g2,#scratch
+.register %g3,#scratch
+#endif
+
+.section ".text",#alloc,#execinstr
+
+#ifdef __PIC__
+SPARC_PIC_THUNK(%g1)
+#endif
+___
+
+########################################################################
+# Register layout for mont[mul|sqr] instructions.
+# For details see "Oracle SPARC Architecture 2011" manual at
+# http://www.oracle.com/technetwork/server-storage/sun-sparc-enterprise/documentation/.
+#
+my @R=map("%f".2*$_,(0..11,30,31,12..29));
+my @N=(map("%l$_",(0..7)),map("%o$_",(0..5))); @N=(@N,@N,@N[0..3]);
+my @A=(@N[0..13],@R[14..31]);
+my @B=(map("%i$_",(0..5)),map("%l$_",(0..7))); @B=(@B,@B,map("%o$_",(0..3)));
+
+########################################################################
+# int bn_mul_mont_t4_$NUM(u64 *rp,const u64 *ap,const u64 *bp,
+# const u64 *np,const BN_ULONG *n0);
+#
+sub generate_bn_mul_mont_t4() {
+my $NUM=shift;
+my ($rp,$ap,$bp,$np,$sentinel)=map("%g$_",(1..5));
+
+$code.=<<___;
+.globl bn_mul_mont_t4_$NUM
+.align 32
+bn_mul_mont_t4_$NUM:
+#ifdef __arch64__
+ mov 0,$sentinel
+ mov -128,%g4
+#elif defined(SPARCV9_64BIT_STACK)
+ SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
+ ld [%g1+0],%g1 ! OPENSSL_sparcv9_P[0]
+ mov -2047,%g4
+ and %g1,SPARCV9_64BIT_STACK,%g1
+ movrz %g1,0,%g4
+ mov -1,$sentinel
+ add %g4,-128,%g4
+#else
+ mov -1,$sentinel
+ mov -128,%g4
+#endif
+ sllx $sentinel,32,$sentinel
+ save %sp,%g4,%sp
+#ifndef __arch64__
+ save %sp,-128,%sp ! warm it up
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ restore
+ restore
+ restore
+ restore
+ restore
+ restore
+#endif
+ and %sp,1,%g4
+ or $sentinel,%fp,%fp
+ or %g4,$sentinel,$sentinel
+
+ ! copy arguments to global registers
+ mov %i0,$rp
+ mov %i1,$ap
+ mov %i2,$bp
+ mov %i3,$np
+ ld [%i4+0],%f1 ! load *n0
+ ld [%i4+4],%f0
+ fsrc2 %f0,%f60
+___
+
+# load ap[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+my $lo=$i<13?@A[$i+1]:"%o7";
+$code.=<<___;
+ ld [$ap+$i*8+0],$lo
+ ld [$ap+$i*8+4],@A[$i]
+ sllx @A[$i],32,@A[$i]
+ or $lo,@A[$i],@A[$i]
+___
+}
+for(; $i<$NUM; $i++) {
+my ($hi,$lo)=("%f".2*($i%4),"%f".(2*($i%4)+1));
+$code.=<<___;
+ ld [$ap+$i*8+0],$lo
+ ld [$ap+$i*8+4],$hi
+ fsrc2 $hi,@A[$i]
+___
+}
+# load np[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+my $lo=$i<13?@N[$i+1]:"%o7";
+$code.=<<___;
+ ld [$np+$i*8+0],$lo
+ ld [$np+$i*8+4],@N[$i]
+ sllx @N[$i],32,@N[$i]
+ or $lo,@N[$i],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<28 && $i<$NUM; $i++) {
+my $lo=$i<27?@N[$i+1]:"%o7";
+$code.=<<___;
+ ld [$np+$i*8+0],$lo
+ ld [$np+$i*8+4],@N[$i]
+ sllx @N[$i],32,@N[$i]
+ or $lo,@N[$i],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+my $lo=($i<$NUM-1)?@N[$i+1]:"%o7";
+$code.=<<___;
+ ld [$np+$i*8+0],$lo
+ ld [$np+$i*8+4],@N[$i]
+ sllx @N[$i],32,@N[$i]
+ or $lo,@N[$i],@N[$i]
+___
+}
+$code.=<<___;
+ cmp $ap,$bp
+ be SIZE_T_CC,.Lmsquare_$NUM
+ nop
+___
+
+# load bp[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+my $lo=$i<13?@B[$i+1]:"%o7";
+$code.=<<___;
+ ld [$bp+$i*8+0],$lo
+ ld [$bp+$i*8+4],@B[$i]
+ sllx @B[$i],32,@B[$i]
+ or $lo,@B[$i],@B[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+my $lo=($i<$NUM-1)?@B[$i+1]:"%o7";
+$code.=<<___;
+ ld [$bp+$i*8+0],$lo
+ ld [$bp+$i*8+4],@B[$i]
+ sllx @B[$i],32,@B[$i]
+ or $lo,@B[$i],@B[$i]
+___
+}
+# magic ################################################################
+$code.=<<___;
+ .word 0x81b02920+$NUM-1 ! montmul $NUM-1
+.Lmresume_$NUM:
+ fbu,pn %fcc3,.Lmabort_$NUM
+#ifndef __arch64__
+ and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Lmabort_$NUM
+#endif
+ nop
+#ifdef __arch64__
+ restore
+ restore
+ restore
+ restore
+ restore
+#else
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Lmabort1_$NUM
+ restore
+#endif
+___
+
+# save tp[$NUM] ########################################################
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ movxtod @A[$i],@R[$i]
+___
+}
+$code.=<<___;
+#ifdef __arch64__
+ restore
+#else
+ and %fp,$sentinel,$sentinel
+ restore
+ and $sentinel,1,%o7
+ and %fp,$sentinel,$sentinel
+ srl %fp,0,%fp ! just in case?
+ or %o7,$sentinel,$sentinel
+ brz,a,pn $sentinel,.Lmdone_$NUM
+ mov 0,%i0 ! return failure
+#endif
+___
+for($i=0; $i<12 && $i<$NUM; $i++) {
+@R[$i] =~ /%f([0-9]+)/;
+my $lo = "%f".($1+1);
+$code.=<<___;
+ st $lo,[$rp+$i*8+0]
+ st @R[$i],[$rp+$i*8+4]
+___
+}
+for(; $i<$NUM; $i++) {
+my ($hi,$lo)=("%f".2*($i%4),"%f".(2*($i%4)+1));
+$code.=<<___;
+ fsrc2 @R[$i],$hi
+ st $lo,[$rp+$i*8+0]
+ st $hi,[$rp+$i*8+4]
+___
+}
+$code.=<<___;
+ mov 1,%i0 ! return success
+.Lmdone_$NUM:
+ ret
+ restore
+
+.Lmabort_$NUM:
+ restore
+ restore
+ restore
+ restore
+ restore
+.Lmabort1_$NUM:
+ restore
+
+ mov 0,%i0 ! return failure
+ ret
+ restore
+
+.align 32
+.Lmsquare_$NUM:
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+ .word 0x81b02940+$NUM-1 ! montsqr $NUM-1
+ ba .Lmresume_$NUM
+ nop
+.type bn_mul_mont_t4_$NUM, #function
+.size bn_mul_mont_t4_$NUM, .-bn_mul_mont_t4_$NUM
+___
+}
+
+for ($i=8;$i<=32;$i+=8) {
+ &generate_bn_mul_mont_t4($i);
+}
+
+########################################################################
+#
+sub load_ccr {
+my ($ptbl,$pwr,$ccr,$skip_wr)=@_;
+$code.=<<___;
+ srl $pwr, 2, %o4
+ and $pwr, 3, %o5
+ and %o4, 7, %o4
+ sll %o5, 3, %o5 ! offset within first cache line
+ add %o5, $ptbl, $ptbl ! of the pwrtbl
+ or %g0, 1, %o5
+ sll %o5, %o4, $ccr
+___
+$code.=<<___ if (!$skip_wr);
+ wr $ccr, %g0, %ccr
+___
+}
+sub load_b_pair {
+my ($pwrtbl,$B0,$B1)=@_;
+
+$code.=<<___;
+ ldx [$pwrtbl+0*32], $B0
+ ldx [$pwrtbl+8*32], $B1
+ ldx [$pwrtbl+1*32], %o4
+ ldx [$pwrtbl+9*32], %o5
+ movvs %icc, %o4, $B0
+ ldx [$pwrtbl+2*32], %o4
+ movvs %icc, %o5, $B1
+ ldx [$pwrtbl+10*32],%o5
+ move %icc, %o4, $B0
+ ldx [$pwrtbl+3*32], %o4
+ move %icc, %o5, $B1
+ ldx [$pwrtbl+11*32],%o5
+ movneg %icc, %o4, $B0
+ ldx [$pwrtbl+4*32], %o4
+ movneg %icc, %o5, $B1
+ ldx [$pwrtbl+12*32],%o5
+ movcs %xcc, %o4, $B0
+ ldx [$pwrtbl+5*32],%o4
+ movcs %xcc, %o5, $B1
+ ldx [$pwrtbl+13*32],%o5
+ movvs %xcc, %o4, $B0
+ ldx [$pwrtbl+6*32], %o4
+ movvs %xcc, %o5, $B1
+ ldx [$pwrtbl+14*32],%o5
+ move %xcc, %o4, $B0
+ ldx [$pwrtbl+7*32], %o4
+ move %xcc, %o5, $B1
+ ldx [$pwrtbl+15*32],%o5
+ movneg %xcc, %o4, $B0
+ add $pwrtbl,16*32, $pwrtbl
+ movneg %xcc, %o5, $B1
+___
+}
+sub load_b {
+my ($pwrtbl,$Bi)=@_;
+
+$code.=<<___;
+ ldx [$pwrtbl+0*32], $Bi
+ ldx [$pwrtbl+1*32], %o4
+ ldx [$pwrtbl+2*32], %o5
+ movvs %icc, %o4, $Bi
+ ldx [$pwrtbl+3*32], %o4
+ move %icc, %o5, $Bi
+ ldx [$pwrtbl+4*32], %o5
+ movneg %icc, %o4, $Bi
+ ldx [$pwrtbl+5*32], %o4
+ movcs %xcc, %o5, $Bi
+ ldx [$pwrtbl+6*32], %o5
+ movvs %xcc, %o4, $Bi
+ ldx [$pwrtbl+7*32], %o4
+ move %xcc, %o5, $Bi
+ add $pwrtbl,8*32, $pwrtbl
+ movneg %xcc, %o4, $Bi
+___
+}
+
+########################################################################
+# int bn_pwr5_mont_t4_$NUM(u64 *tp,const u64 *np,const BN_ULONG *n0,
+# const u64 *pwrtbl,int pwr,int stride);
+#
+sub generate_bn_pwr5_mont_t4() {
+my $NUM=shift;
+my ($tp,$np,$pwrtbl,$pwr,$sentinel)=map("%g$_",(1..5));
+
+$code.=<<___;
+.globl bn_pwr5_mont_t4_$NUM
+.align 32
+bn_pwr5_mont_t4_$NUM:
+#ifdef __arch64__
+ mov 0,$sentinel
+ mov -128,%g4
+#elif defined(SPARCV9_64BIT_STACK)
+ SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
+ ld [%g1+0],%g1 ! OPENSSL_sparcv9_P[0]
+ mov -2047,%g4
+ and %g1,SPARCV9_64BIT_STACK,%g1
+ movrz %g1,0,%g4
+ mov -1,$sentinel
+ add %g4,-128,%g4
+#else
+ mov -1,$sentinel
+ mov -128,%g4
+#endif
+ sllx $sentinel,32,$sentinel
+ save %sp,%g4,%sp
+#ifndef __arch64__
+ save %sp,-128,%sp ! warm it up
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ restore
+ restore
+ restore
+ restore
+ restore
+ restore
+#endif
+ and %sp,1,%g4
+ or $sentinel,%fp,%fp
+ or %g4,$sentinel,$sentinel
+
+ ! copy arguments to global registers
+ mov %i0,$tp
+ mov %i1,$np
+ ld [%i2+0],%f1 ! load *n0
+ ld [%i2+4],%f0
+ mov %i3,$pwrtbl
+ srl %i4,%g0,%i4 ! pack last arguments
+ sllx %i5,32,$pwr
+ or %i4,$pwr,$pwr
+ fsrc2 %f0,%f60
+___
+
+# load tp[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$tp+$i*8],@A[$i]
+___
+}
+for(; $i<$NUM; $i++) {
+$code.=<<___;
+ ldd [$tp+$i*8],@A[$i]
+___
+}
+# load np[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$np+$i*8],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<28 && $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$np+$i*8],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$np+$i*8],@N[$i]
+___
+}
+# load pwrtbl[pwr] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+
+ srlx $pwr, 32, %o4 ! unpack $pwr
+ srl $pwr, %g0, %o5
+ sub %o4, 5, %o4
+ mov $pwrtbl, %o7
+ sllx %o4, 32, $pwr ! re-pack $pwr
+ or %o5, $pwr, $pwr
+ srl %o5, %o4, %o5
+___
+ &load_ccr("%o7","%o5","%o4");
+$code.=<<___;
+ b .Lstride_$NUM
+ nop
+.align 16
+.Lstride_$NUM:
+___
+for($i=0; $i<14 && $i<$NUM; $i+=2) {
+ &load_b_pair("%o7",@B[$i],@B[$i+1]);
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i+=2) {
+ &load_b_pair("%i7",@B[$i],@B[$i+1]);
+}
+$code.=<<___;
+ srax $pwr, 32, %o4 ! unpack $pwr
+ srl $pwr, %g0, %o5
+ sub %o4, 5, %o4
+ mov $pwrtbl, %i7
+ sllx %o4, 32, $pwr ! re-pack $pwr
+ or %o5, $pwr, $pwr
+ srl %o5, %o4, %o5
+___
+ &load_ccr("%i7","%o5","%o4",1);
+
+# magic ################################################################
+for($i=0; $i<5; $i++) {
+$code.=<<___;
+ .word 0x81b02940+$NUM-1 ! montsqr $NUM-1
+ fbu,pn %fcc3,.Labort_$NUM
+#ifndef __arch64__
+ and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Labort_$NUM
+#endif
+ nop
+___
+}
+$code.=<<___;
+ wr %o4, %g0, %ccr
+ .word 0x81b02920+$NUM-1 ! montmul $NUM-1
+ fbu,pn %fcc3,.Labort_$NUM
+#ifndef __arch64__
+ and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Labort_$NUM
+#endif
+
+ srax $pwr, 32, %o4
+#ifdef __arch64__
+ brgez %o4,.Lstride_$NUM
+ restore
+ restore
+ restore
+ restore
+ restore
+#else
+ brgez %o4,.Lstride_$NUM
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Labort1_$NUM
+ restore
+#endif
+___
+
+# save tp[$NUM] ########################################################
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ movxtod @A[$i],@R[$i]
+___
+}
+$code.=<<___;
+#ifdef __arch64__
+ restore
+#else
+ and %fp,$sentinel,$sentinel
+ restore
+ and $sentinel,1,%o7
+ and %fp,$sentinel,$sentinel
+ srl %fp,0,%fp ! just in case?
+ or %o7,$sentinel,$sentinel
+ brz,a,pn $sentinel,.Ldone_$NUM
+ mov 0,%i0 ! return failure
+#endif
+___
+for($i=0; $i<$NUM; $i++) {
+$code.=<<___;
+ std @R[$i],[$tp+$i*8]
+___
+}
+$code.=<<___;
+ mov 1,%i0 ! return success
+.Ldone_$NUM:
+ ret
+ restore
+
+.Labort_$NUM:
+ restore
+ restore
+ restore
+ restore
+ restore
+.Labort1_$NUM:
+ restore
+
+ mov 0,%i0 ! return failure
+ ret
+ restore
+.type bn_pwr5_mont_t4_$NUM, #function
+.size bn_pwr5_mont_t4_$NUM, .-bn_pwr5_mont_t4_$NUM
+___
+}
+
+for ($i=8;$i<=32;$i+=8) {
+ &generate_bn_pwr5_mont_t4($i);
+}
+
+{
+########################################################################
+# Fall-back subroutines
+#
+# copy of bn_mul_mont_vis3 adjusted for vectors of 64-bit values
+#
+($n0,$m0,$m1,$lo0,$hi0, $lo1,$hi1,$aj,$alo,$nj,$nlo,$tj)=
+ (map("%g$_",(1..5)),map("%o$_",(0..5,7)));
+
+# int bn_mul_mont(
+$rp="%o0"; # u64 *rp,
+$ap="%o1"; # const u64 *ap,
+$bp="%o2"; # const u64 *bp,
+$np="%o3"; # const u64 *np,
+$n0p="%o4"; # const BN_ULONG *n0,
+$num="%o5"; # int num); # caller ensures that num is >=3
+$code.=<<___;
+.globl bn_mul_mont_t4
+.align 32
+bn_mul_mont_t4:
+ add %sp, STACK_BIAS, %g4 ! real top of stack
+ sll $num, 3, $num ! size in bytes
+ add $num, 63, %g1
+ andn %g1, 63, %g1 ! buffer size rounded up to 64 bytes
+ sub %g4, %g1, %g1
+ andn %g1, 63, %g1 ! align at 64 byte
+ sub %g1, STACK_FRAME, %g1 ! new top of stack
+ sub %g1, %g4, %g1
+
+ save %sp, %g1, %sp
+___
+# +-------------------------------+<----- %sp
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# | __int64 tmp[0] |
+# +-------------------------------+
+# . .
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# . .
+($rp,$ap,$bp,$np,$n0p,$num)=map("%i$_",(0..5));
+($t0,$t1,$t2,$t3,$cnt,$tp,$bufsz)=map("%l$_",(0..7));
+($ovf,$i)=($t0,$t1);
+$code.=<<___;
+ ld [$n0p+0], $t0 ! pull n0[0..1] value
+ ld [$n0p+4], $t1
+ add %sp, STACK_BIAS+STACK_FRAME, $tp
+ ldx [$bp+0], $m0 ! m0=bp[0]
+ sllx $t1, 32, $n0
+ add $bp, 8, $bp
+ or $t0, $n0, $n0
+
+ ldx [$ap+0], $aj ! ap[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[0]
+ umulxhi $aj, $m0, $hi0
+
+ ldx [$ap+8], $aj ! ap[1]
+ add $ap, 16, $ap
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $lo0, $n0, $m1 ! "tp[0]"*n0
+
+ mulx $aj, $m0, $alo ! ap[1]*bp[0]
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ umulxhi $nj, $m1, $hi1
+
+ ldx [$np+8], $nj ! np[1]
+
+ addcc $lo0, $lo1, $lo1
+ add $np, 16, $np
+ addxc %g0, $hi1, $hi1
+
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+
+ ba .L1st
+ sub $num, 24, $cnt ! cnt=num-3
+
+.align 16
+.L1st:
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0
+
+ ldx [$ap+0], $aj ! ap[j]
+ addcc $nlo, $hi1, $lo1
+ add $ap, 8, $ap
+ addxc $nj, %g0, $hi1 ! nhi=nj
+
+ ldx [$np+0], $nj ! np[j]
+ mulx $aj, $m0, $alo ! ap[j]*bp[0]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp ! tp++
+
+ brnz,pt $cnt, .L1st
+ sub $cnt, 8, $cnt ! j--
+!.L1st
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp
+
+ addcc $hi0, $hi1, $hi1
+ addxc %g0, %g0, $ovf ! upmost overflow bit
+ stxa $hi1, [$tp]0xe2
+ add $tp, 8, $tp
+
+ ba .Louter
+ sub $num, 16, $i ! i=num-2
+
+.align 16
+.Louter:
+ ldx [$bp+0], $m0 ! m0=bp[i]
+ add $bp, 8, $bp
+
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+
+ ldx [$ap+0], $aj ! ap[0]
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[i]
+ ldx [$tp], $tj ! tp[0]
+ umulxhi $aj, $m0, $hi0
+ ldx [$ap+8], $aj ! ap[1]
+ addcc $lo0, $tj, $lo0 ! ap[0]*bp[i]+tp[0]
+ mulx $aj, $m0, $alo ! ap[1]*bp[i]
+ addxc %g0, $hi0, $hi0
+ mulx $lo0, $n0, $m1 ! tp[0]*n0
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ add $ap, 16, $ap
+ umulxhi $nj, $m1, $hi1
+ ldx [$np+8], $nj ! np[1]
+ add $np, 16, $np
+ addcc $lo1, $lo0, $lo1
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ addxc %g0, $hi1, $hi1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+
+ ba .Linner
+ sub $num, 24, $cnt ! cnt=num-3
+.align 16
+.Linner:
+ addcc $alo, $hi0, $lo0
+ ldx [$tp+8], $tj ! tp[j]
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ ldx [$ap+0], $aj ! ap[j]
+ add $ap, 8, $ap
+ addcc $nlo, $hi1, $lo1
+ mulx $aj, $m0, $alo ! ap[j]*bp[i]
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ ldx [$np+0], $nj ! np[j]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addxc %g0, $hi0, $hi0
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+ add $tp, 8, $tp
+ brnz,pt $cnt, .Linner
+ sub $cnt, 8, $cnt
+!.Linner
+ ldx [$tp+8], $tj ! tp[j]
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi0, $hi0
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+
+ subcc %g0, $ovf, %g0 ! move upmost overflow to CCR.xcc
+ addxccc $hi1, $hi0, $hi1
+ addxc %g0, %g0, $ovf
+ stx $hi1, [$tp+8]
+ add $tp, 16, $tp
+
+ brnz,pt $i, .Louter
+ sub $i, 8, $i
+
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+ ba .Lsub
+ subcc $num, 8, $cnt ! cnt=num-1 and clear CCR.xcc
+
+.align 16
+.Lsub:
+ ldx [$tp], $tj
+ add $tp, 8, $tp
+ ldx [$np+0], $nj
+ add $np, 8, $np
+ subccc $tj, $nj, $t2 ! tp[j]-np[j]
+ srlx $tj, 32, $tj
+ srlx $nj, 32, $nj
+ subccc $tj, $nj, $t3
+ add $rp, 8, $rp
+ st $t2, [$rp-4] ! reverse order
+ st $t3, [$rp-8]
+ brnz,pt $cnt, .Lsub
+ sub $cnt, 8, $cnt
+
+ sub $np, $num, $np ! rewind
+ sub $tp, $num, $tp
+ sub $rp, $num, $rp
+
+ subc $ovf, %g0, $ovf ! handle upmost overflow bit
+ and $tp, $ovf, $ap
+ andn $rp, $ovf, $np
+ or $np, $ap, $ap ! ap=borrow?tp:rp
+ ba .Lcopy
+ sub $num, 8, $cnt
+
+.align 16
+.Lcopy: ! copy or in-place refresh
+ ldx [$ap+0], $t2
+ add $ap, 8, $ap
+ stx %g0, [$tp] ! zap
+ add $tp, 8, $tp
+ stx $t2, [$rp+0]
+ add $rp, 8, $rp
+ brnz $cnt, .Lcopy
+ sub $cnt, 8, $cnt
+
+ mov 1, %o0
+ ret
+ restore
+.type bn_mul_mont_t4, #function
+.size bn_mul_mont_t4, .-bn_mul_mont_t4
+___
+
+# int bn_mul_mont_gather5(
+$rp="%o0"; # u64 *rp,
+$ap="%o1"; # const u64 *ap,
+$bp="%o2"; # const u64 *pwrtbl,
+$np="%o3"; # const u64 *np,
+$n0p="%o4"; # const BN_ULONG *n0,
+$num="%o5"; # int num, # caller ensures that num is >=3
+ # int power);
+$code.=<<___;
+.globl bn_mul_mont_gather5_t4
+.align 32
+bn_mul_mont_gather5_t4:
+ add %sp, STACK_BIAS, %g4 ! real top of stack
+ sll $num, 3, $num ! size in bytes
+ add $num, 63, %g1
+ andn %g1, 63, %g1 ! buffer size rounded up to 64 bytes
+ sub %g4, %g1, %g1
+ andn %g1, 63, %g1 ! align at 64 byte
+ sub %g1, STACK_FRAME, %g1 ! new top of stack
+ sub %g1, %g4, %g1
+ LDPTR [%sp+STACK_7thARG], %g4 ! load power, 7th argument
+
+ save %sp, %g1, %sp
+___
+# +-------------------------------+<----- %sp
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# | __int64 tmp[0] |
+# +-------------------------------+
+# . .
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# . .
+($rp,$ap,$bp,$np,$n0p,$num)=map("%i$_",(0..5));
+($t0,$t1,$t2,$t3,$cnt,$tp,$bufsz,$ccr)=map("%l$_",(0..7));
+($ovf,$i)=($t0,$t1);
+ &load_ccr($bp,"%g4",$ccr);
+ &load_b($bp,$m0,"%o7"); # m0=bp[0]
+
+$code.=<<___;
+ ld [$n0p+0], $t0 ! pull n0[0..1] value
+ ld [$n0p+4], $t1
+ add %sp, STACK_BIAS+STACK_FRAME, $tp
+ sllx $t1, 32, $n0
+ or $t0, $n0, $n0
+
+ ldx [$ap+0], $aj ! ap[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[0]
+ umulxhi $aj, $m0, $hi0
+
+ ldx [$ap+8], $aj ! ap[1]
+ add $ap, 16, $ap
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $lo0, $n0, $m1 ! "tp[0]"*n0
+
+ mulx $aj, $m0, $alo ! ap[1]*bp[0]
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ umulxhi $nj, $m1, $hi1
+
+ ldx [$np+8], $nj ! np[1]
+
+ addcc $lo0, $lo1, $lo1
+ add $np, 16, $np
+ addxc %g0, $hi1, $hi1
+
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+
+ ba .L1st_g5
+ sub $num, 24, $cnt ! cnt=num-3
+
+.align 16
+.L1st_g5:
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0
+
+ ldx [$ap+0], $aj ! ap[j]
+ addcc $nlo, $hi1, $lo1
+ add $ap, 8, $ap
+ addxc $nj, %g0, $hi1 ! nhi=nj
+
+ ldx [$np+0], $nj ! np[j]
+ mulx $aj, $m0, $alo ! ap[j]*bp[0]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp ! tp++
+
+ brnz,pt $cnt, .L1st_g5
+ sub $cnt, 8, $cnt ! j--
+!.L1st_g5
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp
+
+ addcc $hi0, $hi1, $hi1
+ addxc %g0, %g0, $ovf ! upmost overflow bit
+ stxa $hi1, [$tp]0xe2
+ add $tp, 8, $tp
+
+ ba .Louter_g5
+ sub $num, 16, $i ! i=num-2
+
+.align 16
+.Louter_g5:
+ wr $ccr, %g0, %ccr
+___
+ &load_b($bp,$m0); # m0=bp[i]
+$code.=<<___;
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+
+ ldx [$ap+0], $aj ! ap[0]
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[i]
+ ldx [$tp], $tj ! tp[0]
+ umulxhi $aj, $m0, $hi0
+ ldx [$ap+8], $aj ! ap[1]
+ addcc $lo0, $tj, $lo0 ! ap[0]*bp[i]+tp[0]
+ mulx $aj, $m0, $alo ! ap[1]*bp[i]
+ addxc %g0, $hi0, $hi0
+ mulx $lo0, $n0, $m1 ! tp[0]*n0
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ add $ap, 16, $ap
+ umulxhi $nj, $m1, $hi1
+ ldx [$np+8], $nj ! np[1]
+ add $np, 16, $np
+ addcc $lo1, $lo0, $lo1
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ addxc %g0, $hi1, $hi1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+
+ ba .Linner_g5
+ sub $num, 24, $cnt ! cnt=num-3
+.align 16
+.Linner_g5:
+ addcc $alo, $hi0, $lo0
+ ldx [$tp+8], $tj ! tp[j]
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ ldx [$ap+0], $aj ! ap[j]
+ add $ap, 8, $ap
+ addcc $nlo, $hi1, $lo1
+ mulx $aj, $m0, $alo ! ap[j]*bp[i]
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ ldx [$np+0], $nj ! np[j]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addxc %g0, $hi0, $hi0
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+ add $tp, 8, $tp
+ brnz,pt $cnt, .Linner_g5
+ sub $cnt, 8, $cnt
+!.Linner_g5
+ ldx [$tp+8], $tj ! tp[j]
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi0, $hi0
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+
+ subcc %g0, $ovf, %g0 ! move upmost overflow to CCR.xcc
+ addxccc $hi1, $hi0, $hi1
+ addxc %g0, %g0, $ovf
+ stx $hi1, [$tp+8]
+ add $tp, 16, $tp
+
+ brnz,pt $i, .Louter_g5
+ sub $i, 8, $i
+
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+ ba .Lsub_g5
+ subcc $num, 8, $cnt ! cnt=num-1 and clear CCR.xcc
+
+.align 16
+.Lsub_g5:
+ ldx [$tp], $tj
+ add $tp, 8, $tp
+ ldx [$np+0], $nj
+ add $np, 8, $np
+ subccc $tj, $nj, $t2 ! tp[j]-np[j]
+ srlx $tj, 32, $tj
+ srlx $nj, 32, $nj
+ subccc $tj, $nj, $t3
+ add $rp, 8, $rp
+ st $t2, [$rp-4] ! reverse order
+ st $t3, [$rp-8]
+ brnz,pt $cnt, .Lsub_g5
+ sub $cnt, 8, $cnt
+
+ sub $np, $num, $np ! rewind
+ sub $tp, $num, $tp
+ sub $rp, $num, $rp
+
+ subc $ovf, %g0, $ovf ! handle upmost overflow bit
+ and $tp, $ovf, $ap
+ andn $rp, $ovf, $np
+ or $np, $ap, $ap ! ap=borrow?tp:rp
+ ba .Lcopy_g5
+ sub $num, 8, $cnt
+
+.align 16
+.Lcopy_g5: ! copy or in-place refresh
+ ldx [$ap+0], $t2
+ add $ap, 8, $ap
+ stx %g0, [$tp] ! zap
+ add $tp, 8, $tp
+ stx $t2, [$rp+0]
+ add $rp, 8, $rp
+ brnz $cnt, .Lcopy_g5
+ sub $cnt, 8, $cnt
+
+ mov 1, %o0
+ ret
+ restore
+.type bn_mul_mont_gather5_t4, #function
+.size bn_mul_mont_gather5_t4, .-bn_mul_mont_gather5_t4
+___
+}
+
+$code.=<<___;
+.globl bn_flip_t4
+.align 32
+bn_flip_t4:
+.Loop_flip:
+ ld [%o1+0], %o4
+ sub %o2, 1, %o2
+ ld [%o1+4], %o5
+ add %o1, 8, %o1
+ st %o5, [%o0+0]
+ st %o4, [%o0+4]
+ brnz %o2, .Loop_flip
+ add %o0, 8, %o0
+ retl
+ nop
+.type bn_flip_t4, #function
+.size bn_flip_t4, .-bn_flip_t4
+
+.globl bn_flip_n_scatter5_t4
+.align 32
+bn_flip_n_scatter5_t4:
+ sll %o3, 3, %o3
+ srl %o1, 1, %o1
+ add %o3, %o2, %o2 ! &pwrtbl[pwr]
+ sub %o1, 1, %o1
+.Loop_flip_n_scatter5:
+ ld [%o0+0], %o4 ! inp[i]
+ ld [%o0+4], %o5
+ add %o0, 8, %o0
+ sllx %o5, 32, %o5
+ or %o4, %o5, %o5
+ stx %o5, [%o2]
+ add %o2, 32*8, %o2
+ brnz %o1, .Loop_flip_n_scatter5
+ sub %o1, 1, %o1
+ retl
+ nop
+.type bn_flip_n_scatter5_t4, #function
+.size bn_flip_n_scatter5_t4, .-bn_flip_n_scatter5_t4
+
+.globl bn_gather5_t4
+.align 32
+bn_gather5_t4:
+___
+ &load_ccr("%o2","%o3","%g1");
+$code.=<<___;
+ sub %o1, 1, %o1
+.Loop_gather5:
+___
+ &load_b("%o2","%g1");
+$code.=<<___;
+ stx %g1, [%o0]
+ add %o0, 8, %o0
+ brnz %o1, .Loop_gather5
+ sub %o1, 1, %o1
+
+ retl
+ nop
+.type bn_gather5_t4, #function
+.size bn_gather5_t4, .-bn_gather5_t4
+
+.asciz "Montgomery Multiplication for SPARC T4, David S. Miller, Andy Polyakov"
+.align 4
+___
+
+&emit_assembler();
+
+close STDOUT;