--- a/components/zsh/Completion/Solaris/Command/_ipadm Fri Mar 28 07:02:45 2014 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,375 +0,0 @@
-#compdef ipadm
-# Synced with the S11U1 build 19 man page
-
-_ipadm_ifs() {
- local -a extra
-
- zparseopts -D -E -a extra /+:
-
- compadd "$@" - $(ipadm show-if -p -o ifname) $extra[2,-1]
-}
-
-_ipadm_enabled_ifs() {
- # Interfaces not marked "disabled"
- compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o state,ifname)}:#disabled:*}#*:}"
-}
-
-_ipadm_disabled_ifs() {
- compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o state,ifname)}#disabled:*}:#*:*}"
-}
-
-_ipadm_vnis() {
- compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o class,ifname)}#vni:*}:#*:*}"
-}
-
-_ipadm_ipmps() {
- compadd "$@" - "${(@)${(@)${(f)$(ipadm show-if -p -o class,ifname)}#ipmp:*}:#*:*}"
-}
-
-_ipadm_get_possible_values() {
- local -a proto poss
- local cmd
-
- cmd=${${(M)words:#set-*}/set/show}
- if [[ $cmd == "show-prop" ]]; then
- # You have to specify a protocol for show-prop if you specify a
- # property, so we loop through them all.
- poss=()
- for proto in ipv4 ipv6 icmp tcp udp sctp; do
- poss=( $poss ${(u)=$(ipadm $cmd -c -p ${IPREFIX%=} -o possible $proto 2> /dev/null)//,/ } )
- done
- poss=( ${(u)poss:#\?} )
- else
- proto=${=opt_args[-m]:+-m $opt_args[-m]}
- poss=( ${(u)=$(ipadm $cmd -c -p ${IPREFIX%=} $proto -o possible)//,/ } )
- fi
- if [[ $poss[1] == [0-9]##-[0-9]## ]]; then
- if (( $#poss > 1 )); then
- _message -e "number in ranges ${(j:, :)poss}"
- else
- _message -e "number in range $poss"
- fi
- elif [[ -z $poss[1] ]]; then
- _message -e "value"
- else
- compadd "$@" - $poss
- fi
-}
-
-_ipadm_addrobjs() {
- compadd "$@" - $(ipadm show-addr -p -o addrobj)
-}
-
-_ipadm_addrobjs_or_ifs() {
- compadd "$@" - $(ipadm show-addr -p -o addrobj) \
- $(ipadm show-if -p -o ifname)
-}
-
-_ipadm_protos() {
- compadd "$@" - $(ipadm show-prop -c -o proto)
-}
-
-_ipadm() {
- local context state line expl
- local -A opt_args
- local -a subcmds
- local -a if_properties if_propproperties if_properties2
- local -a addr_properties addr_propproperties
- local -a addrobj_properties
- local -a proto_ipv4_properties proto_ipv6_properties proto_tcp_properties
- local -a proto_udp_properties proto_sctp_properties proto_icmp_properties
- local -a proto_all_properties proto_propproperties
-
- subcmds=(
- "help"
- {"show","disable","enable"}"-if"
- {"create","delete"}"-ip"
- {"create","delete"}"-vni"
- {"create","delete","add","remove"}"-ipmp"
- {"set","reset","show"}"-ifprop"
- {"create","delete","show","up","down","refresh","disable","enable"}"-addr"
- {"set","reset","show"}"-addrprop"
- {"set","reset","show"}"-prop"
- )
-
- if_properties=( "ifname" "class" "state" "active" "current" "persistent" "over" )
-
- if_propproperties=( "ifname" "property" "proto" "perm" "current" "persistent" "default" "possible" )
-
- if_properties2=(
- "arp:value:_ipadm_get_possible_values"
- "forwarding:value:_ipadm_get_possible_values"
- "metric:value:_ipadm_get_possible_values"
- "mtu:value:_ipadm_get_possible_values"
- "nud:value:_ipadm_get_possible_values"
- "usesrc:value:_ipadm_ifs -/ none"
- "exchange_routes:value:_ipadm_get_possible_values"
- "group:value:_ipadm_get_possible_values"
- "standby:value:_ipadm_get_possible_values"
- )
-
- addr_properties=(
- "broadcast:value:_ipadm_get_possible_values"
- "deprecated:value:_ipadm_get_possible_values"
- "prefixlen:value:_ipadm_get_possible_values"
- "private:value:_ipadm_get_possible_values"
- "reqhost:value:_ipadm_get_possible_values"
- "transmit:value:_ipadm_get_possible_values"
- "zone:value:_zones -t c"
- )
-
- addr_propproperties=( "addrobj" "property" "perm" "current" "persistent" "default" "possible" )
-
- addrobj_properties=(
- "addrobj" "type" "state" "current" "persistent" "addr"
- "cid-type" "cid-value" "begin" "expire" "renew"
- )
-
- proto_ipv4_properties=( "hostmodel" "ttl" "forwarding" )
- proto_ipv6_properties=( "hostmodel" "hoplimit" "forwarding" )
- proto_tcp_properties=( "cong_default" "cong_enabled" "ecn" "extra_priv_ports" "max_buf" "recv_buf"
- "send_buf" "sack" "smallest_anon_port" "largest_anon_port" "smallest_nonpriv_port" )
- proto_udp_properties=( "extra_priv_ports" "max_buf" "recv_buf" "send_buf" "smallest_anon_port"
- "largest_anon_port" "smallest_nonpriv_port" )
- proto_sctp_properties=( "cong_default" "cong_enabled" "extra_priv_ports" "max_buf" "recv_buf"
- "send_buf" "smallest_anon_port" "largest_anon_port" "smallest_nonpriv_port" )
- proto_icmp_properties=( "max_buf" "recv_buf" "send_buf" )
- proto_all_properties=( $proto_ipv4_properties $proto_ipv6_properties $proto_tcp_properties
- $proto_udp_properties $proto_sctp_properties $proto_icmp_properties )
- proto_all_properties=( $^proto_all_properties:value:_ipadm_get_possible_values )
-
- proto_propproperties=( "proto" "property" "perm" "current" "persistent" "default" "possible" )
-
- if [[ $service == "ipadm" ]]; then
- _arguments -C -A "-*" \
- '-\?[Help]' \
- '*::command:->subcmd' && return 0
-
- if (( CURRENT == 1 )); then
- _wanted commands expl "ipadm subcommand" compadd -a subcmds
- return
- fi
- service="$words[1]"
- curcontext="${curcontext%:*}=$service:"
- fi
-
- case $service in
- ("help")
- _arguments ':subcommand:($subcmds)'
- ;;
-
- ("create-ip")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
- ':interface name:'
- ;;
-
- ("delete-ip")
- _arguments -A "-*" \
- ':interface name:_ipadm_ifs'
- ;;
-
- ("create-vni")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
- ':VNI name:'
- ;;
-
- ("delete-vni")
- _arguments -A "-*" \
- ':VNI name:_ipadm_vnis'
- ;;
-
- ("create-ipmp")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
- '(-i --interface)'{-i,--interface}'[List of underlying interfaces]:interface name:_values -s , "interface" $(ipadm show-if -p -o ifname)' \
- ':IPMP interface name:'
- ;;
-
- ("delete-ipmp")
- _arguments -A "-*" \
- '(-f --force)'{-f,--force}'[First remove all underlying interfaces from group]' \
- ':IPMP interface name:_ipadm_ipmps'
- ;;
-
- ("add-ipmp")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
- '(-i --interface)'{-i,--interface}'[List of underlying interfaces]:interface name:_values -s , "interface" $(ipadm show-if -p -o ifname)' \
- ':IPMP interface name:_ipadm_ipmps'
- ;;
-
- ("remove-ipmp")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Interface should be temporary]' \
- '(-i --interface)'{-i,--interface}'[List of underlying interfaces]:interface name:_values -s , "interface" $(ipadm show-if -p -o ifname)' \
- ':IPMP interface name:_ipadm_ipmps'
- ;;
-
- ("show-if")
- _arguments -A "-*" \
- '(-p --parseable)'{-p,--parseable}'[Parseable output]' \
- '(-o --output)'{-o,--output}'[Properties to display]:property:_values -s , "property" $if_properties' \
- ':interface name:_ipadm_ifs'
- ;;
-
- ("disable-if")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- ':interface name:_ipadm_enabled_ifs'
- ;;
-
- ("enable-if")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- ':interface name:_ipadm_disabled_ifs'
- ;;
-
- ("set-ifprop")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- '(-m --module)'{-m,--module}'[Protocol]:protocol:(ipv4 ipv6)' \
- '(-p --prop)'{-p,--prop}'[Property to set]:property:_values -s , "property" $if_properties2' \
- ':interface name:_ipadm_ifs'
- ;;
-
- ("reset-ifprop")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- '(-m --module)'{-m,--module}'[Protocol]:protocol:(ipv4 ipv6)' \
- '(-p --prop)'{-p,--prop}'[Property to reset]:property:($if_properties2)' \
- ':interface name:_ipadm_ifs'
- ;;
-
- ("show-ifprop")
- _arguments -A "-*" \
- '(-c --parseable)'{-c,--parseable}'[Parseable output]' \
- '(-m --module)'{-m,--module}'[Protocol]:protocol:(ipv4 ipv6)' \
- '(-o --output)'{-o,--output}'[Property properties to display]:property:_values -s , "property" $if_propproperties' \
- '(-p --prop)'{-p,--prop}'[Interface properties to display]:property:_values -s , "property" ${if_properties2%%\:*}' \
- ':interface name:_ipadm_ifs'
- ;;
-
- ("create-addr")
- # This causes all options and arguments following -T to be
- # stuck into $opt_args[-T]. It feels hacky, but it seems
- # to do the trick.
- # XXX When -T is static, it's not necessary.
- _arguments -C -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Address should be temporary]' \
- '-T[Address type]:*::address type:->newaddr'
-
- if [[ $state == "newaddr" ]]; then
-
- case ${opt_args[-T]#-T:} in
- ("static:"*)
- local -a addrthingsv4
- addrthingsv4=( "local:address: " "remote:address: ")
- _arguments -A "-*" \
- '(-d --down)'{-d,--down}'[Address should be marked down]' \
- '(-a --address)'{-a,--address}'[Address specification]:address:_values -s , "address" $addrthingsv4' \
- ':address object name:_ipadm_addrobjs_or_ifs'
- ;;
-
- ("dhcp:"*)
- _arguments -A "-*" \
- '(-w --wait)'{-w,--wait}'[Seconds to wait for completion]:number or "forever":{if [[ -prefix [0-9]## ]]; then _message -e "number of seconds"; else _wanted forever expl "number or \"forever\"" compadd forever; fi}' \
- '-h[Request a specific hostname]:hostname:' \
- ':address object name:_ipadm_addrobjs_or_ifs'
- ;;
-
- ("addrconf:"*)
- local -a addrthingsv6 statefulness
- addrthingsv6=( "local:interface id: " "remote:interface id: ")
- statefulness=( "stateful:statefulness:(yes no)" "stateless:statelessness:(yes no)" )
- _arguments -A "-*" \
- '(-i --interface-id)'{-i,--interface-id}'[Interface ID]:address:_values -s , "interface id" $addrthingsv6' \
- '(-p --prop)'{-p,--prop}'[Statefulness configuration]:statefulness configuration:_values -s , "statefulness" $statefulness' \
- ':address object name:_ipadm_addrobjs_or_ifs'
- ;;
- (*)
- _wanted commands expl "address type" compadd static dhcp addrconf
- ;;
- esac
- fi
-
- ;;
-
- ("delete-addr")
- _arguments -A "-*" \
- '(-r --release)'{-r,--release}'[Release DHCP-acquired address]' \
- ':address object name:_ipadm_addrobjs'
- ;;
-
- ("show-addr")
- _arguments -A "-*" \
- '(-d --dhcp -p --parseable)'{-d,--dhcp}'[Display DHCP status fields]' \
- '(-p --parseable -d --dhcp)'{-p,--parseable}'[Parseable output]' \
- '(-o --output)'{-o,--output}'[Properties to display]:property:_values -s , "property" $addrobj_properties' \
- ':address object name:_ipadm_addrobjs_or_ifs'
- ;;
-
- ({"up","down","disable","enable"}"-addr")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- ':address object name:_ipadm_addrobjs'
- ;;
-
- ("refresh-addr")
- _arguments -A "-*" \
- '(-i --inform)'{-i,--inform}'[Retrieve DHCP parameters]' \
- ':address object name:_ipadm_addrobjs'
- ;;
-
- ("set-addrprop")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- '(-p --prop)'{-p,--prop}'[Property to set]:property:_values -s , "property" $addr_properties' \
- ':address object name:_ipadm_addrobjs'
- ;;
-
- ("reset-addrprop")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- '(-p --prop)'{-p,--prop}'[Property to reset]:property:(${addr_properties%%\:*})' \
- ':address object name:_ipadm_addrobjs'
- ;;
-
- ("show-addrprop")
- _arguments -A "-*" \
- '(-c --parseable)'{-c,--parseable}'[Parseable output]' \
- '(-o --output)'{-o,--output}'[Property properties to display]:property:_values -s , "property" $addr_propproperties' \
- '(-p --prop)'{-p,--prop}'[Address object properties to display]:property:_values -s , "property" ${addr_properties%%\:*}' \
- ':address object name:_ipadm_addrobjs_or_ifs'
- ;;
-
- ("set-prop")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- '(-p --prop)'{-p,--prop}'[Property to set]:property:_values -s , "property" $proto_all_properties' \
- ':protocol name:_ipadm_protos'
- ;;
-
- ("reset-prop")
- _arguments -A "-*" \
- '(-t --temporary)'{-t,--temporary}'[Change should be temporary]' \
- '(-p --prop)'{-p,--prop}'[Property to reset]:property:(${proto_all_properties%%\:*})' \
- ':protocol name:_ipadm_protos'
- ;;
-
- ("show-prop")
- _arguments -A "-*" \
- '(-c --parseable)'{-c,--parseable}'[Parseable output]' \
- '(-o --output)'{-o,--output}'[Property properties to display]:property:_values -s , "property" $proto_propproperties' \
- '(-p --prop)'{-p,--prop}'[Protocol properties to display]:property:_values -s , "property" ${proto_all_properties%%\:*}' \
- ':protocol name:_ipadm_protos'
- ;;
-
- (*)
- _message "unknown ipadm subcommand: $service"
- ;;
- esac
-}
-
-_ipadm "$@"