#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
#
include ../../../make-rules/shared-macros.mk
PATH=/usr/bin:/usr/gnu/bin:/usr/sbin
COMPONENT_NAME= Python
COMPONENT_VERSION= 2.6.8
COMPONENT_PROJECT_URL= http://python.org/
COMPONENT_SRC= $(COMPONENT_NAME)-$(COMPONENT_VERSION)
COMPONENT_ARCHIVE= $(COMPONENT_SRC).tar.bz2
COMPONENT_ARCHIVE_HASH= \
sha256:c34036718ee1f091736677f543bc7960861cf9fcbea77d49572b59f7f1ab3c3f
COMPONENT_ARCHIVE_URL= $(COMPONENT_PROJECT_URL)ftp/python/$(COMPONENT_VERSION)/$(COMPONENT_ARCHIVE)
COMPONENT_BUGDB= utility/python
TPNO= 9104
include $(WS_MAKE_RULES)/prep.mk
include $(WS_MAKE_RULES)/configure.mk
include $(WS_MAKE_RULES)/ips.mk
include $(WS_MAKE_RULES)/lint-libraries.mk
# Need to preserve timestamp for Grammar files. If the pickle files are older,
# Python will try to rebuild them.
PKGSEND_PUBLISH_OPTIONS += -T \*Grammar\*.txt
PKGSEND_PUBLISH_OPTIONS += -T \*Grammar\*.pickle
# We patch auto* files, so regenerate headers and configure
COMPONENT_PREP_ACTION = \
(cd $(@D) ; autoheader ; autoconf)
# This seems horribly wrong, but these defines break the ability to build c99
# compliant modules or with gcc.
COMPONENT_POST_CONFIGURE_ACTION = \
(cd $(@D) ; \
perl -pi -e 's/(^\#define _POSIX_C_SOURCE.*)/\/* $$1 *\//' pyconfig.h ; \
perl -pi -e 's/^(\#define _XOPEN_SOURCE.*)/\/* $$1 *\//' pyconfig.h ; \
perl -pi -e 's/^(\#define _XOPEN_SOURCE_EXTENDED.*)/\/* $$1 *\//' \
pyconfig.h)
# The python build is profile-guided for studio; to see the benefits of that,
# Python must be compiled with -xO5 and a different build target must be used.
# Use of xprofile requires that the same options be used during compilation and
# linking. The targets chosen are based on Solaris 11 minimum supported system
# requirements.
COMPONENT_BUILD_TARGETS = profile-opt
XPROFILE_DIR = $(BUILD_DIR_$(BITS))/.profile
PYFLAGS.i386 = -xtarget=opteron -xarch=sse2 -xcache=generic
PYFLAGS.sparc =
CFLAGS += -xO5 $(PYFLAGS.$(MACH))
LDFLAGS += -xO5 $(PYFLAGS.$(MACH))
# we don't want to leak $(CC_BITS) into BASECFLAGS as it causes problems with
# python-config
CC += $(CFLAGS)
C99MODE=
CPPFLAGS += -IPython
# so we find the ncurses headers
CPPFLAGS += -I/usr/include/ncurses
# enable large files how they did in JDS
CPPFLAGS += -D_LARGEFILE64_SOURCE
# libffi for _ctypes
CPPFLAGS += $(shell pkg-config --cflags-only-I libffi)
# Python puts its header files in a special place.
LINT_FLAGS += -I$(SOURCE_DIR)/Include
CONFIGURE_OPTIONS += --infodir=$(CONFIGURE_INFODIR)
CONFIGURE_OPTIONS += --enable-shared
CONFIGURE_OPTIONS += --with-system-ffi
CONFIGURE_OPTIONS += --without-gcc
CONFIGURE_OPTIONS += CPPFLAGS="$(CPPFLAGS)"
CONFIGURE_OPTIONS += CFLAGS="$(CFLAGS)"
CONFIGURE_OPTIONS += CCSHARED="$(CC_PIC)"
CONFIGURE_OPTIONS += CXX="$(CXX)"
CONFIGURE_OPTIONS += CXXFLAGS="$(CXXFLAGS)"
CONFIGURE_OPTIONS += DFLAGS="-$(BITS)"
CONFIGURE_OPTIONS += XPROFILE_DIR="$(XPROFILE_DIR)"
COMPONENT_BUILD_ENV += DFLAGS="-$(BITS)"
COMPONENT_BUILD_ENV += XPROFILE_DIR="$(XPROFILE_DIR)"
# 64 bit shared objects need to go in a 64-bit directory
COMPONENT_INSTALL_ARGS.64 += DESTSHARED=$(CONFIGURE_PREFIX)/lib/python2.6/lib-dynload
# Setup pyconfig.h file to support 32 & 64 bit.
# If the /usr/lib/python2.6/lib2to3/*.pickle files are older than the related
# *.txt files in the same directory, it will rebuild them anytime you try to
# build a Python module. So here we also touch the pickle files to avoid this.
#
COMPONENT_POST_INSTALL_ACTION= \
(cd $(PROTOUSRDIR) ; \
$(MV) include/python2.6/pyconfig.h include/python2.6/pyconfig-$(BITS).h ; \
$(TOUCH) lib/python2.6/lib2to3/*.pickle)
ASLR_MODE = $(ASLR_ENABLE)
# common targets
$(INSTALL_32): $(INSTALL_64)
configure: $(CONFIGURE_32_and_64)
build: $(BUILD_32_and_64)
install: $(INSTALL_32_and_64)
# Using "-uall,-network" ensures all tests are run except the network tests.
# The network tests contain many expected failures when run behind a firewall.
# The "-v" ensures verbose mode. You can set TESTOPTS_PYTHON_TEST to a
# particular test if you want to run just one test. For example, run gmake with
# "-k" so it continues and does both 32-bit and 64-bit tests, even if there is a
# failure, like this:
# $ TESTOPTS_PYTHON_TEST=test_sys gmake -k test
# Note that when a test succeeds, the builds/*/.tested file gets created. You
# may need to remove these files, or run "gmake clobber" or "gmake clean"
# between tests.
#
COMPONENT_TEST_ENV = EXTRATESTOPTS="-v -uall,-network $(TESTOPTS_PYTHON_TEST)"
COMPONENT_TEST_TARGETS = test
test: $(TEST_32_and_64)
REQUIRED_PACKAGES += compress/bzip2
REQUIRED_PACKAGES += database/sqlite-3
REQUIRED_PACKAGES += developer/library/xprofile
REQUIRED_PACKAGES += library/database/gdbm
REQUIRED_PACKAGES += library/libffi
REQUIRED_PACKAGES += library/ncurses
REQUIRED_PACKAGES += library/python/tkinter-26
REQUIRED_PACKAGES += library/readline
REQUIRED_PACKAGES += library/security/openssl
REQUIRED_PACKAGES += library/zlib
REQUIRED_PACKAGES += runtime/tcl-8
REQUIRED_PACKAGES += runtime/tk-8
REQUIRED_PACKAGES += shell/ksh93
REQUIRED_PACKAGES += system/core-os
REQUIRED_PACKAGES += system/library
REQUIRED_PACKAGES += system/library/math
REQUIRED_PACKAGES += system/linker
REQUIRED_PACKAGES += x11/compatibility/links-xorg
REQUIRED_PACKAGES += x11/library/libx11