15997718 Interface addition/deletion causing frequent error messages in snmpd.log
17208688 MIB II SNMP table data discrepancy for network interfaces
16356248 snmpd unresponsive for 30 seconds after start with monitors set in snmpd.conf
17651108 snmpd dumps core when there are duplicate "exec" entries in snmpd.conf
--- configure 2010-01-07 12:09:40.000000000 -0800
+++ configure 2011-05-02 12:02:33.178294309 -0700
@@ -1,4 +1,4 @@
-#! /bin/sh
+#! /bin/bash
# From configure.in Revision.
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61 for GNU MP 4.3.2.
@@ -63,7 +63,7 @@
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
+ echo "#! /bin/bash" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
@@ -575,7 +575,7 @@
# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+SHELL=${CONFIG_SHELL-/bin/bash}
case X$ECHO in
X*--fallback-echo)
@@ -660,7 +660,7 @@
elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
test "X$CONFIG_SHELL" != X/bin/ksh; then
# If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/bash}
export ORIGINAL_CONFIG_SHELL
CONFIG_SHELL=/bin/ksh
export CONFIG_SHELL
@@ -702,7 +702,7 @@
if test "$prev" != 'sed 50q "$0"'; then
echo_test_string=`eval $prev`
export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/bash}} "$0" ${1+"$@"}
else
# Oops. We lost completely, so just stick with echo.
echo=echo
@@ -745,7 +745,7 @@
subdirs=
MFLAGS=
MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
+SHELL=${CONFIG_SHELL-/bin/bash}
# Identity of this package.
PACKAGE_NAME='GNU MP'
@@ -2424,7 +2424,7 @@
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
+SHELL = /bin/bash
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
@@ -2997,7 +2997,7 @@
# abilist needs to be non-empty, "standard" is just a generic name here
-abilist="standard"
+abilist="64 32"
# FIXME: We'd like to prefer an ANSI compiler, perhaps by preferring
# c89 over cc here. But note that on HP-UX c89 provides a castrated
@@ -3739,7 +3739,7 @@
# reject ABI=64 in favour of ABI=32 if the user has forced the flags to
# 32-bit mode.
#
- abilist="32"
+ abilist="64 32"
cclist="gcc acc cc"
any_testlist="sizeof-long-4"
@@ -3803,6 +3803,7 @@
case $host in
*-*-solaris* | *-*-sunos*)
# Note no -g, it disables all optimizations.
+ abilist="64 32"
cc_cflags=
cc_cflags_optlist="opt arch cpu"
@@ -3892,6 +3893,7 @@
# recurrently caused problems with miscompilation. Of course,
# -fast is documented as miscompiling things for the sake of speed.
#
+ abilist="64 32"
cclist_64="$cclist_64 cc"
cc_64_cflags="-xO3 -xarch=v9"
cc_64_cflags_optlist="cpu"
@@ -4197,8 +4199,9 @@
esac
-CFLAGS_or_unset=${CFLAGS-'(unset)'}
-CPPFLAGS_or_unset=${CPPFLAGS-'(unset)'}
+CFLAGS_or_unset=${CFLAGS}
+CPPFLAGS_or_unset=${CPPFLAGS}
+abilist="64 32"
cat >&5 <<EOF
User:
@@ -12394,7 +12397,7 @@
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/bash}}
while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
@@ -16449,7 +16452,7 @@
EGREP=$lt_EGREP
# The linker used to build libraries.
-LD=$lt_LD
+LD="$LTCC $LTCFLAGS $LDFLAGS"
# Whether we need hard or soft links.
LN_S=$lt_LN_S
@@ -19523,7 +19526,7 @@
EGREP=$lt_EGREP
# The linker used to build libraries.
-LD=$lt_LD_CXX
+LD="$CC $CXXFLAGS $LDFLAGS"
# Whether we need hard or soft links.
LN_S=$lt_LN_S
@@ -27353,11 +27356,17 @@
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#else
int foo (int x) __attribute__ ((const));
+#endif
int
main ()
{
-
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#endif
;
return 0;
}
@@ -27406,7 +27415,11 @@
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.c <<EOF
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#else
void *foo (int x) __attribute__ ((malloc));
+#endif
EOF
gmp_compile="$CC $CFLAGS $CPPFLAGS -c conftest.c >conftest.out 2>&1"
if { (eval echo "$as_me:$LINENO: \"$gmp_compile\"") >&5
@@ -27447,13 +27460,19 @@
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#else
typedef int SItype __attribute__ ((mode (SI)));
+#endif
int
main ()
{
-
- ;
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#else
return 0;
+ #endif
}
_ACEOF
rm -f conftest.$ac_objext
@@ -27505,13 +27524,20 @@
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#else
void foo (int x) __attribute__ ((noreturn));
+#endif
int
main ()
{
-
+#if defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+#error "No attribute support for Sun compilers."
+#else
;
return 0;
+#endif
}
_ACEOF
rm -f conftest.$ac_objext
@@ -34385,7 +34411,7 @@
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
+ echo "#! /bin/bash" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then