25740641 Update git to version 2.12.0
25768337 git help isn't able to display help
make[1]: Entering directory '$(@D)'
/usr/gnu/bin/make check-recursive
make[2]: Entering directory '$(@D)'
Making check in datapath
make[3]: Entering directory '$(@D)/datapath'
make[4]: Entering directory '$(@D)/datapath'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '$(@D)/datapath'
make[3]: Leaving directory '$(@D)/datapath'
make[3]: Entering directory '$(@D)'
/usr/gnu/bin/make tests/flowgen.pl tests/testpki-cacert.pem tests/testpki-cert.pem tests/testpki-privkey.pem tests/testpki-req.pem tests/testpki-cert2.pem tests/testpki-privkey2.pem tests/testpki-req2.pem
make[4]: Entering directory '$(@D)'
make[4]: Nothing to be done for '$(SOURCE_DIR)/tests/flowgen.pl'.
rm -f tests/pki/stamp
rm -rf tests/pki
/bin/bash $(SOURCE_DIR)/utilities/ovs-pki.in --dir=tests/pki --log=tests/ovs-pki.log init
Creating controllerca...
Creating switchca...
/bin/bash $(SOURCE_DIR)/utilities/ovs-pki.in --dir=tests/pki --log=tests/ovs-pki.log req+sign tests/pki/test
/bin/bash $(SOURCE_DIR)/utilities/ovs-pki.in --dir=tests/pki --log=tests/ovs-pki.log req+sign tests/pki/test2
: > tests/pki/stamp
cp tests/pki/switchca/cacert.pem tests/testpki-cacert.pem
cp tests/pki/test-cert.pem tests/testpki-cert.pem
cp tests/pki/test-privkey.pem tests/testpki-privkey.pem
cp tests/pki/test-req.pem tests/testpki-req.pem
cp tests/pki/test2-cert.pem tests/testpki-cert2.pem
cp tests/pki/test2-privkey.pem tests/testpki-privkey2.pem
cp tests/pki/test2-req.pem tests/testpki-req2.pem
make[4]: Leaving directory '$(@D)'
/usr/gnu/bin/make check-local
make[4]: Entering directory '$(@D)'
/bin/bash '$(SOURCE_DIR)/tests/testsuite' -C tests AUTOTEST_PATH=utilities:vswitchd:ovsdb:vtep:tests
## ----------------------------- ##
## openvswitch 2.3.2 test suite. ##
## ----------------------------- ##
bfd
1: bfd - basic config on different bridges ok
2: bfd - Verify tunnel down detection ok
3: bfd - concatenated path down ok
4: bfd - Edit the Min Tx/Rx values ok
5: bfd - check_tnl_key FAILED (bfd.at:226)
6: bfd - bfd decay ok
7: bfd - bfd forwarding_if_rx - bfd on one side ok
8: bfd - bfd forwarding_if_rx - bfd on both sides ok
9: bfd - bfd forwarding_if_rx - with bfd decay ok
10: bfd - bfd forwarding_if_rx - demand_rx_bfd ok
11: bfd - flap_count ok
cfm
12: cfm - check update ovsdb 1 FAILED (cfm.at:50)
13: cfm - check update ovsdb 2 ok
14: cfm - demand mode ok
15: cfm - demand_rx_ccm ok
16: cfm - flap_count ok
17: cfm - fault_override ok
lacp
18: lacp - config ok
19: lacp - multi port config ok
20: lacp - negotiation ok
library unit tests
21: test flow extractor ok
22: test TCP/IP checksumming ok
23: test hash functions ok
24: test hash map ok
25: test hash index ok
26: test atomic operations ok
27: test linked lists ok
28: test packet library ok
29: test SHA-1 ok
30: test type properties ok
31: test strtok_r bug fix FAILED (library.at:51)
32: test byte order conversion ok
33: test random number generator ok
34: ctz() function ok
35: clz() function ok
36: round_up_pow2() function ok
37: round_down_pow2() function ok
38: count_1bits() function ok
39: log_2_floor() function ok
40: bitwise_copy() function ok
41: bitwise_zero() function ok
42: bitwise_one() function ok
43: bitwise_is_all_zeros() function ok
44: ovs_scan() function ok
45: test unix socket, short pathname - C ok
46: test unix socket, long pathname - C ok
47: test unix socket, short pathname - Python ok
48: test unix socket, long pathname - Python ok
49: ovs_assert ok
50: snprintf ok
heap library
51: heap library -- insert delete same order ok
52: heap library -- insert delete reverse order ok
53: heap library -- insert delete every order ok
54: heap library -- insert delete same order with dups ok
55: heap library -- raw insert ok
56: heap library -- raw delete ok
bundle link selection
57: hrw bundle link selection ok
58: active_backup bundle link selection ok
59: hrw bundle single link selection ok
60: hrw bundle no link selection ok
61: bundle action missing argument ok
62: bundle action bad fields ok
63: bundle action bad algorithm ok
64: bundle action bad slave type ok
65: bundle action bad slave delimiter ok
flow classifier unit tests
66: flow classifier - empty ok
67: flow classifier - destroy null ok
68: flow classifier - single rule ok
69: flow classifier - rule replacement ok
70: flow classifier - many rules in one list ok
71: flow classifier - many rules in one table ok
72: flow classifier - many rules in two tables ok
73: flow classifier - many rules in five tables ok
miniflow unit tests
74: miniflow - miniflow ok
75: miniflow - minimask_has_extra ok
76: miniflow - minimask_combine ok
flow classifier lookup segmentation
77: flow classifier - lookup segmentation ok
flow classifier prefix lookup
78: flow classifier - prefix lookup ok
struct alignment checker unit tests
79: check struct tail padding ok
80: check struct internal alignment ok
81: check struct declared size ok
82: check wrong struct's declared size ok
daemon unit tests - C
83: daemon ok
84: daemon --monitor ok
85: daemon --detach ok
86: daemon --detach --monitor ok
87: daemon --detach startup errors ok
88: daemon --detach --monitor startup errors ok
daemon unit tests - Python
89: daemon - Python ok
90: daemon --monitor - Python ok
91: daemon --monitor restart exit code - Python ok
92: daemon --detach - Python ok
93: daemon --detach --monitor - Python ok
94: daemon --detach startup errors - Python ok
95: daemon --detach --monitor startup errors - Python ok
96: daemon --detach closes standard fds - Python ok
97: daemon --detach --monitor closes standard fds ok
OpenFlow actions
98: OpenFlow 1.0 action translation ok
99: OpenFlow 1.1 action translation ok
100: OpenFlow 1.1 instruction translation ok
101: ofp-actions - inconsistent MPLS actions ok
ofp-print
102: empty ok
103: too short ok
104: wrong OpenFlow version ok
105: truncated message ok
106: message only uses part of buffer ok
107: OFPT_HELLO - ordinary ok
108: OFPT_HELLO with extra data ok
109: OFPT_HELLO with version bitmap ok
110: OFPT_HELLO with version bitmap and extra data ok
111: OFPT_HELLO with higher than supported version ok
112: OFPT_HELLO with contradictory version bitmaps ok
113: OFPT_ECHO_REQUEST, empty payload ok
114: OFPT_ECHO_REQUEST, 5-byte payload ok
115: OFPT_ECHO_REPLY, empty payload ok
116: OFPT_ECHO_REPLY, 5-byte payload ok
117: OFPT_FEATURES_REQUEST ok
118: OFPT_FEATURES_REPLY - OF1.0 ok
119: OFPT_FEATURES_REPLY cut off mid-port - OF1.0 ok
120: OFPT_FEATURES_REPLY - OF1.1 ok
121: OFPT_FEATURES_REPLY cut off mid-port - OF1.1 ok
122: OFPT_FEATURES_REPLY - OF1.2 ok
123: OFPT_FEATURES_REPLY cut off mid-port - OF1.2 ok
124: OFPT_FEATURES_REPLY - OF1.3 ok
125: OFPT_FEATURES_REPLY - with auxiliary_id - OF1.3 ok
126: OFPT_GET_CONFIG_REQUEST ok
127: OFPT_GET_CONFIG_REPLY, most common form ok
128: OFPT_GET_CONFIG_REPLY, frags and miss_send_len ok
129: OFPT_PACKET_IN - OF1.0 ok
130: OFPT_PACKET_IN - OF1.0, with hex output of packet data ok
131: OFPT_PACKET_IN - OF1.1 ok
132: OFPT_PACKET_IN - OF1.2 ok
133: OFPT_PACKET_IN - OF1.2, with hex output of packet data ok
134: OFPT_PACKET_IN - OF1.3 ok
135: OFPT_PACKET_IN - OF1.3, with hex output of packet data ok
136: OFPT_FLOW_REMOVED - OF1.0 ok
137: OFPT_FLOW_REMOVED - OF1.2 ok
138: OFPT_FLOW_REMOVED - OF1.3 ok
139: OFPT_PORT_STATUS - OF1.0 ok
140: OFPT_PORT_STATUS - OF1.1 ok
141: OFPT_PORT_STATUS - OF1.4 ok
142: OFPT_PACKET_OUT - OF1.0 ok
143: OFPT_PACKET_OUT - OF1.0, with packet ok
144: OFPT_PACKET_OUT - OF1.0, with hex output of packet data ok
145: OFPT_PACKET_OUT - OF1.1 ok
146: OFPT_PACKET_OUT - OF1.1, with packet ok
147: OFPT_FLOW_MOD - OF1.0 - low verbosity ok
148: OFPT_FLOW_MOD - OF1.1 - low verbosity ok
149: OFPT_FLOW_MOD - OF1.2 - low verbosity ok
150: OFPT_FLOW_MOD - OF1.0 - high verbosity ok
151: OFPT_FLOW_MOD - OF1.2 - low verbosity ok
152: OFPT_FLOW_MOD - OF1.3 - flags - low verbosity ok
153: OFPT_FLOW_MOD - OF1.2 - set-field ip_src ok
154: OFPT_FLOW_MOD - OF1.2 - set-field ip_dst ok
155: OFPT_FLOW_MOD - OF1.2 - set-field sctp_src ok
156: OFPT_FLOW_MOD - OF1.2 - set-field sctp_dst ok
157: OFPT_FLOW_MOD - OF1.3 - meter ok
158: OFPT_FLOW reply - OF1.2 - set-field ip_src ok
159: OFPT_FLOW reply - OF1.2 - set-field ip_dst ok
160: OFPT_FLOW reply - OF1.2 - set-field sctp_src ok
161: OFPT_FLOW reply - OF1.2 - set-field sctp_dst ok
162: OFPT_PORT_MOD - OF1.0 ok
163: OFPT_PORT_MOD - OF1.1 ok
164: OFPT_PORT_MOD - OF1.2 ok
165: OFPT_PORT_MOD - OF1.3 ok
166: OFPT_PORT_MOD - OF1.4 ok
167: OFPT_TABLE_MOD - OF1.1 ok
168: OFPT_TABLE_MOD - OF1.2 ok
169: OFPT_TABLE_MOD - OF1.3 ok
170: OFPT_TABLE_MOD - OF1.4 ok
171: OFPST_DESC request ok
172: OFPST_DESC reply ok
173: OFPST_FLOW request - OF1.0 ok
174: OFPST_FLOW request - OF1.2 ok
175: OFPST_FLOW request - OF1.3 ok
176: OFPST_FLOW reply - OF1.0 ok
177: OFPST_FLOW reply - OF1.2 ok
178: OFPST_AGGREGATE request - OF1.0 ok
179: OFPST_AGGREGATE request - OF1.2 ok
180: OFPST_AGGREGATE request - OF1.3 ok
181: OFPST_AGGREGATE reply - OF1.0 ok
182: OFPST_AGGREGATE reply - OF1.2 ok
183: OFPST_AGGREGATE reply - OF1.3 ok
184: OFPST_TABLE request - OF1.0 ok
185: OFPST_TABLE request - OF1.1 ok
186: OFPST_TABLE request - OF1.2 ok
187: OFPST_TABLE request - OF1.3 ok
188: OFPST_TABLE reply - OF1.0 ok
189: OFPST_TABLE reply - OF1.2 ok
190: OFPST_TABLE reply - OF1.3 ok
191: OFPST_PORT request - 1.0 ok
192: OFPST_PORT request - 1.1 ok
193: OFPST_PORT request - 1.2 ok
194: OFPST_PORT request - 1.3 ok
195: OFPST_PORT reply - OF1.0 ok
196: OFPST_PORT reply - OF1.2 ok
197: OFPST_PORT reply - OF1.3 ok
198: OFPST_PORT reply - OF1.4 ok
199: OFPST_QUEUE request - OF1.0 ok
200: OFPST_QUEUE request - OF1.1 ok
201: OFPST_QUEUE request - OF1.2 ok
202: OFPST_QUEUE request - OF1.3 ok
203: OFPST_QUEUE reply - OF1.0 ok
204: OFPST_QUEUE reply - OF1.1 ok
205: OFPST_QUEUE reply - OF1.2 ok
206: OFPST_QUEUE reply - OF1.3 ok
207: OFPST_QUEUE reply - OF1.4 ok
208: OFPST_GROUP request ok
209: OFPST_GROUP reply - OF1.1 ok
210: OFPST_GROUP reply - OF1.3 ok
211: OFPST_GROUP_DESC request - OF1.1 ok
212: OFPST_GROUP_DESC request - OF1.5 ok
213: OFPST_GROUP_DESC reply ok
214: OFPST_GROUP_FEATURES request ok
215: OFPST_GROUP_FEATURES reply ok
216: OFPST_PORT_DESC request - OF1.0 ok
217: OFPST_PORT_DESC request - OF1.5 ok
218: OFPST_PORT_DESC reply - OF1.0 ok
219: OFPST_PORT_DESC reply - OF1.4 ok
220: OFPT_METER_MOD request - OF1.3 ok
221: OFPT_METER_MOD request - bad band - OF1.3 ok
222: OFPT_METER_MOD request - bad command - OF1.3 ok
223: OFPT_METER_MOD request - bad flags - OF1.3 ok
224: OFPST_METER request - OF1.3 ok
225: OFPST_METER_CONFIG request - OF1.3 ok
226: OFPST_METER_FEATURES request - OF1.3 ok
227: OFPST_METER_FEATURES reply - OF1.3 ok
228: OFPST_METER_CONFIG reply - OF1.3 ok
229: OFPST_METER reply - OF1.3 ok
230: OFPST_TABLE_FEATURES request - OF1.3 ok
231: OFPT_BARRIER_REQUEST - OF1.0 ok
232: OFPT_BARRIER_REQUEST - OF1.1 ok
233: OFPT_BARRIER_REQUEST - OF1.2 ok
234: OFPT_BARRIER_REQUEST - OF1.3 ok
235: OFPT_BARRIER_REPLY - OF1.0 ok
236: OFPT_BARRIER_REPLY - OF1.1 ok
237: OFPT_BARRIER_REPLY - OF1.2 ok
238: OFPT_BARRIER_REPLY - OF1.3 ok
239: OFPT_QUEUE_GET_CONFIG_REQUEST - OF1.0 ok
240: OFPT_QUEUE_GET_CONFIG_REQUEST - OF1.2 ok
241: OFPT_QUEUE_GET_CONFIG_REPLY - OF1.0 ok
242: OFPT_QUEUE_GET_CONFIG_REPLY - OF1.2 ok
243: OFPT_SET_ASYNC - OF1.3 ok
244: OFPT_ROLE_REQUEST - OF1.2 ok
245: OFPT_ROLE_REQUEST - nochange - OF1.2 ok
246: NXT_ROLE_REQUEST ok
247: OFPT_ROLE_REPLY - OF1.2 ok
248: NXT_ROLE_REPLY ok
249: OFP_ROLE_STATUS - master, experimenter - OF1.4 ok
250: OFP_ROLE_STATUS - master, config - OF1.4 ok
251: OFP_ROLE_STATUS - master, config,generation - OF1.4 ok
252: NXT_SET_PACKET_IN ok
253: NXT_PACKET_IN ok
254: NXT_PACKET_IN, with hex output of packet data ok
255: NXT_SET_ASYNC_CONFIG ok
256: NXT_SET_CONTROLLER_ID ok
257: NXT_FLOW_MONITOR_CANCEL ok
258: NXT_FLOW_MONITOR_PAUSED ok
259: NXT_FLOW_MONITOR_RESUMED ok
260: NXT_SET_FLOW_FORMAT ok
261: NXT_FLOW_MOD, low verbosity ok
262: NXT_FLOW_MOD, high verbosity ok
263: OFPT_GROUP_MOD ok
264: NXT_FLOW_REMOVED ok
265: NXT_FLOW_MOD_TABLE_ID ok
266: NXST_FLOW request ok
267: NXST_FLOW reply ok
268: NXST_AGGREGATE request ok
269: NXST_AGGREGATE reply ok
270: NXST_FLOW_MONITOR request ok
271: NXST_FLOW_MONITOR reply ok
272: OFPT_BUNDLE_CONTROL - OPEN_REQUEST ok
273: OFPT_BUNDLE_CONTROL - OPEN_REQUEST ok
274: OFPT_BUNDLE_CONTROL - OPEN_REQUEST ok
275: OFPT_BUNDLE_CONTROL - OPEN_REPLY ok
276: OFPT_BUNDLE_CONTROL - CLOSE_REQUEST ok
277: OFPT_BUNDLE_CONTROL - CLOSE_REPLY ok
278: OFPT_BUNDLE_CONTROL - COMMIT_REQUEST ok
279: OFPT_BUNDLE_CONTROL - COMMIT_REPLY ok
280: OFPT_BUNDLE_CONTROL - DISCARD_REQUEST ok
281: OFPT_BUNDLE_CONTROL - DISCARD_REPLY ok
282: OFPT_BUNDLE_ADD_MESSAGE - OFPT_HELLO ok
OpenFlow utilities
283: encoding hellos ok
ofp-errors tests
284: OFPT_ERROR with type OFPET_HELLO_FAILED - OF1.0 ok
285: OFPT_ERROR with type OFPET_HELLO_FAILED - OF1.1 ok
286: OFPT_ERROR with type OFPET_BAD_REQUEST - OF1.0 ok
287: OFPT_ERROR prints type of truncated inner messages ok
288: OFPT_ERROR with code OFPBMC_BAD_PREREQ - OF1.0 ok
289: OFPT_ERROR with code OFPBMC_BAD_PREREQ - OF1.1 ok
290: OFPT_ERROR with type OFPFMFC_OVERLAP - OF1.0 ok
291: OFPT_ERROR with type OFPBIC_UNSUP_INST - OF1.1 ok
292: encoding OFPBIC_* experimenter errors ok
293: encoding errors extension that became official ok
294: decoding OFPBIC_* experimenter errors ok
295: decoding experimenter errors ok
296: encoding experimenter errors ok
ovs-ofctl
297: ovs-ofctl parse-flows choice of protocol ok
298: ovs-ofctl parse-flows (OpenFlow 1.0) ok
299: ovs-ofctl parse-flows (OpenFlow 1.1) ok
300: ovs-ofctl parse-flows (OpenFlow 1.2) ok
301: ovs-ofctl parse-flow with invalid mask ok
302: ovs-ofctl action inconsistency (OpenFlow 1.1) ok
303: ovs-ofctl parse-flows (With Tunnel-Parameters) ok
304: ovs-ofctl parse-flows (skb_priority) ok
305: ovs-ofctl parse-flows (NXM) ok
306: ovs-ofctl -F nxm parse-flows ok
307: ovs-ofctl -F nxm -mmm parse-flows ok
308: ovs-ofctl parse-nx-match ok
309: ovs-ofctl parse-ofp10-match ok
310: ovs-ofctl parse-ofp11-match ok
311: ovs-ofctl parse-nx-match loose ok
312: ovs-ofctl parse-oxm ok
313: ovs-ofctl parse-oxm loose ok
314: check TCP flags expression in OXM and NXM ok
315: ovs-ofctl check-vlan ok
316: ovs-ofctl -F option and NXM features ok
317: ovs-ofctl -F option with flow_mods ok
318: ovs-ofctl dump-flows honors -F option ok
319: ovs-ofctl dump-flows rejects bad -F option ok
320: ovs-ofctl add-flow reports non-normalized flows ok
321: ovs-ofctl dump-flows with sorting ok
322: ovs-ofctl diff-flows ok
323: ovs-ofctl diff-flows - suppress false differences ok
324: ovs-ofctl -F and -O interaction ok
325: ovs-ofctl ofp-parse ok
326: tcp flags - filtering ok
datapath parsing and formatting
327: OVS datapath key parsing and formatting - valid forms ok
328: OVS datapath wildcarded key parsing and formatting - valid forms ok
329: OVS datapath wildcarded key filtering. ok
330: OVS datapath actions parsing and formatting - valid forms ok
multipath link selection
331: modulo_n multipath link selection ok
332: hash_threshold multipath link selection ok
333: hrw multipath link selection ok
334: iter_hash multipath link selection ok
335: multipath action missing argument ok
336: multipath action bad fields ok
337: multipath action bad algorithm ok
338: multipath action bad n_links ok
339: multipath action destination too narrow ok
learning action
340: learning action - parsing and formatting ok
341: learning action - parsing and formatting - illegal in_port_oxm ok
342: learning action - parsing and formatting - OXM ok
343: learning action - examples ok
344: learning action - satisfied prerequisites ok
345: learning action - invalid prerequisites ok
346: learning action - standard VLAN+MAC learning ok
347: learning action - learn refreshes hard_age ok
348: learning action - TCPv4 port learning ok
349: learning action - TCPv6 port learning ok
350: learning action - self-modifying flow ok
351: learning action - self-modifying flow with idle_timeout ok
352: learning action - self-modifying flow with hard_timeout ok
353: learning action - fin_timeout feature ok
vconn library -- unix class
354: unix vconn - refuse connection ok
355: unix vconn - accept then close ok
356: unix vconn - read hello ok
357: unix vconn - send plain hello ok
358: unix vconn - send long hello ok
359: unix vconn - send echo hello ok
360: unix vconn - send short hello ok
361: unix vconn - send invalid version hello ok
vconn library -- tcp class
362: tcp vconn - refuse connection ok
363: tcp vconn - accept then close ok
364: tcp vconn - read hello ok
365: tcp vconn - send plain hello ok
366: tcp vconn - send long hello ok
367: tcp vconn - send echo hello ok
368: tcp vconn - send short hello ok
369: tcp vconn - send invalid version hello ok
vconn library -- ssl class
370: ssl vconn - refuse connection ok
371: ssl vconn - accept then close ok
372: ssl vconn - read hello ok
373: ssl vconn - send plain hello ok
374: ssl vconn - send long hello ok
375: ssl vconn - send echo hello ok
376: ssl vconn - send short hello ok
377: ssl vconn - send invalid version hello ok
test dir_name and base_name functions
378: components of "/usr/lib" are "/usr", "lib" ok
379: components of "/usr/" are "/", "usr" ok
380: components of "usr" are ".", "usr" ok
381: components of "/" are "/", "/" ok
382: components of "." are ".", "." ok
383: components of ".." are ".", ".." ok
384: components of "//" are "//", "//" ok
385: components of "//foo" are "//", "foo" ok
386: components of "" are ".", "." ok
387: components of "dir/file" are "dir", "file" ok
388: components of "dir/file/" are "dir", "file" ok
389: components of "dir/file//" are "dir", "file" ok
390: components of "///foo" are "/", "foo" ok
test follow_symlinks function
391: follow_symlinks - relative symlinks ok
392: follow_symlinks - absolute symlinks ok
393: follow_symlinks - symlinks to directories ok
394: follow_symlinks - nonexistent targets ok
395: follow_symlinks - regular files ok
396: follow_symlinks - device targets skipped (file_name.at:98)
397: follow_symlinks - nonexistent files ok
398: follow_symlinks - symlink loop ok
AES-128 unit tests
399: wikipedia test vector 1 ok
400: wikipedia test vector 2 ok
401: NIST KAT ECBKeySbox128e vector 0 ok
402: NIST KAT ECBKeySbox128e vector 1 ok
403: NIST KAT ECBKeySbox128e vector 2 ok
404: NIST KAT ECBKeySbox128e vector 3 ok
405: NIST KAT ECBKeySbox128e vector 4 ok
406: NIST KAT ECBKeySbox128e vector 5 ok
407: NIST KAT ECBKeySbox128e vector 6 ok
408: NIST KAT ECBKeySbox128e vector 7 ok
409: NIST KAT ECBKeySbox128e vector 8 ok
410: NIST KAT ECBKeySbox128e vector 9 ok
411: NIST KAT ECBKeySbox128e vector 10 ok
412: NIST KAT ECBKeySbox128e vector 11 ok
413: NIST KAT ECBKeySbox128e vector 12 ok
414: NIST KAT ECBKeySbox128e vector 13 ok
415: NIST KAT ECBKeySbox128e vector 14 ok
416: NIST KAT ECBKeySbox128e vector 15 ok
417: NIST KAT ECBKeySbox128e vector 16 ok
418: NIST KAT ECBKeySbox128e vector 17 ok
419: NIST KAT ECBKeySbox128e vector 18 ok
420: NIST KAT ECBKeySbox128e vector 19 ok
421: NIST KAT ECBKeySbox128e vector 20 ok
unixctl
422: unixctl ovs-vswitchd exit - Python ok
423: unixctl ovs-vswitchd help - Python ok
424: unixctl ovs-vswitchd arguments - Python ok
425: unixctl bad target - Python ok
426: unixctl server - Python ok
427: unixctl server errors - Python ok
UUID unit tests
428: UUID generation, parsing, serialization ok
JSON -- arrays
429: empty array - C ok
430: empty array - Python ok
431: single-element array - C ok
432: single-element array - Python ok
433: 2-element array - C ok
434: 2-element array - Python ok
435: many-element array - C ok
436: many-element array - Python ok
437: missing comma - C ok
438: missing comma - Python ok
439: trailing comma not allowed - C ok
440: trailing comma not allowed - Python ok
441: doubled comma not allowed - C ok
442: doubled comma not allowed - Python ok
JSON -- strings
443: empty string - C ok
444: empty string - Python ok
445: 1-character strings - C ok
446: 1-character strings - Python ok
447: escape sequences - C ok
448: escape sequences - Python ok
449: Unicode escape sequences - C ok
450: Unicode escape sequences - Python ok
451: surrogate pairs - C ok
452: surrogate pairs - Python expected failure (json.at:93)
453: a string by itself is not valid JSON - C ok
454: a string by itself is not valid JSON - Python ok
455: end of line in quoted string - C ok
456: end of line in quoted string - Python ok
457: formfeed in quoted string - C ok
458: formfeed in quoted string - Python ok
459: bad escape in quoted string - C ok
460: bad escape in quoted string - Python ok
461: \u must be followed by 4 hex digits (1) - C ok
462: \u must be followed by 4 hex digits (1) - Python ok
463: \u must be followed by 4 hex digits (2) - C ok
464: \u must be followed by 4 hex digits (2) - Python ok
465: isolated leading surrogate not allowed - C ok
466: isolated leading surrogate not allowed - Python ok
467: surrogatess must paired properly - C ok
468: surrogatess must paired properly - Python ok
469: null bytes not allowed - C ok
470: null bytes not allowed - Python ok
471: properly quoted backslash at end of string - C ok
472: properly quoted backslash at end of string - Python ok
473: stray backslash at end of string - C ok
474: stray backslash at end of string - Python ok
475: end of input in quoted string - C ok
476: end of input in quoted string - Python ok
JSON -- objects
477: empty object - C ok
478: empty object - Python ok
479: simple object - C ok
480: simple object - Python ok
481: bad value - C ok
482: bad value - Python ok
483: missing colon - C ok
484: missing colon - Python ok
485: missing comma - C ok
486: missing comma - Python ok
487: trailing comma not allowed - C ok
488: trailing comma not allowed - Python ok
489: doubled comma not allowed - C ok
490: doubled comma not allowed - Python ok
491: names must be strings - C ok
492: names must be strings - Python ok
JSON -- literal names
493: null - C ok
494: null - Python ok
495: false - C ok
496: false - Python ok
497: true - C ok
498: true - Python ok
499: a literal by itself is not valid JSON - C ok
500: a literal by itself is not valid JSON - Python ok
501: nullify is invalid - C ok
502: nullify is invalid - Python ok
503: nubs is invalid - C ok
504: nubs is invalid - Python ok
505: xxx is invalid - C ok
506: xxx is invalid - Python ok
JSON -- numbers
507: integers expressed as reals - C ok
508: integers expressed as reals - Python ok
509: large integers - C ok
510: large integers - Python ok
511: large integers expressed as reals - C ok
512: large integers expressed as reals - Python ok
513: large integers that overflow to reals - C ok
514: large integers that overflow to reals - Python ok
515: negative zero - C ok
516: negative zero - Python ok
517: reals - C ok
518: reals - Python ok
519: scientific notation - C ok
520: scientific notation - Python ok
521: +/- DBL_MAX - C ok
522: +/- DBL_MAX - Python ok
523: negative reals - C ok
524: negative reals - Python ok
525: negative scientific notation - C ok
526: negative scientific notation - Python ok
527: 1e-9999 underflows to 0 - C ok
528: 1e-9999 underflows to 0 - Python ok
529: a number by itself is not valid JSON - C ok
530: a number by itself is not valid JSON - Python ok
531: leading zeros not allowed - C ok
532: leading zeros not allowed - Python ok
533: 1e9999 is too big - C ok
534: 1e9999 is too big - Python ok
535: exponent bigger than INT_MAX - C ok
536: exponent bigger than INT_MAX - Python ok
537: decimal point must be followed by digit - C ok
538: decimal point must be followed by digit - Python ok
539: exponent must contain at least one digit (1) - C ok
540: exponent must contain at least one digit (1) - Python ok
541: exponent must contain at least one digit (2) - C ok
542: exponent must contain at least one digit (2) - Python ok
543: exponent must contain at least one digit (3) - C ok
544: exponent must contain at least one digit (3) - Python ok
JSON -- RFC 4627 examples
545: RFC 4267 object example - C ok
546: RFC 4267 object example - Python ok
547: RFC 4267 array example - C ok
548: RFC 4267 array example - Python ok
JSON -- pathological cases
549: trailing garbage - C ok
550: trailing garbage - Python ok
551: formfeeds are not valid white space - C ok
552: formfeeds are not valid white space - Python ok
553: ';' is not a valid token - C ok
554: ';' is not a valid token - Python ok
555: arrays nesting too deep - C ok
556: arrays nesting too deep - Python ok
557: objects nesting too deep - C ok
558: objects nesting too deep - Python ok
559: input may not be empty ok
JSON -- multiple inputs
560: multiple adjacent objects - C ok
561: multiple adjacent objects - Python ok
562: multiple space-separated objects - C ok
563: multiple space-separated objects - Python ok
564: multiple objects on separate lines - C ok
565: multiple objects on separate lines - Python ok
566: multiple objects and arrays - C ok
567: multiple objects and arrays - Python ok
568: garbage between multiple objects - C ok
569: garbage between multiple objects - Python ok
570: garbage after multiple objects - C ok
571: garbage after multiple objects - Python ok
JSON-RPC - C
572: JSON-RPC request and successful reply ok
573: JSON-RPC request and error reply ok
574: JSON-RPC notification ok
JSON-RPC - Python
575: JSON-RPC request and successful reply - Python ok
576: JSON-RPC request and error reply - Python ok
577: JSON-RPC notification - Python ok
tunnel
578: tunnel - input FAILED (tunnel.at:4)
579: tunnel - ECN decapsulation FAILED (tunnel.at:65)
580: tunnel - output FAILED (tunnel.at:112)
581: tunnel - ToS and TTL inheritance FAILED (tunnel.at:144)
582: tunnel - set_tunnel FAILED (tunnel.at:182)
583: tunnel - key FAILED (tunnel.at:216)
584: tunnel - key match FAILED (tunnel.at:265)
585: tunnel - VXLAN ok
586: tunnel - LISP FAILED (tunnel.at:326)
587: tunnel - different VXLAN UDP port ok
588: ofproto-dpif - set_field - tun_src/tun_dst/tun_id FAILED (tunnel.at:367)
lockfile unit tests
589: lock and unlock ok
590: lock and unlock twice ok
591: lock blocks same process ok
592: lock blocks same process twice ok
593: lock blocks other process ok
594: lock twice blocks other process ok
595: lock and unlock allows other process ok
596: lock multiple ok
597: lock symlink ok
598: lock symlink to dir ok
reconnect library
599: nothing happens if not enabled - C ok
600: nothing happens if not enabled - Python ok
601: quick connect, idle disconnect - C ok
602: quick connect, idle disconnect - Python ok
603: slow connect, idle disconnect - C ok
604: slow connect, idle disconnect - Python ok
605: connect backs off - C ok
606: connect backs off - Python ok
607: connections with no data preserve backoff - C ok
608: connections with no data preserve backoff - Python ok
609: brief connection preserves backoff - C ok
610: brief connection preserves backoff - Python ok
611: brief connection with data preserves backoff - C ok
612: brief connection with data preserves backoff - Python ok
613: long connection resets backoff - C ok
614: long connection resets backoff - Python ok
615: connection attempt fails quickly - C ok
616: connection attempt fails quickly - Python ok
617: max-tries of 1 honored - C ok
618: max-tries of 1 honored - Python ok
619: max-tries of 0 honored - C ok
620: max-tries of 0 honored - Python ok
621: passive mode - C ok
622: passive mode - Python ok
ovs-vswitchd
623: ovs-vswitchd detaches correctly with empty db ok
624: ovs-vswitchd -- stats-update-interval ok
625: ovs-vswitchd -- start additional ovs-vswitchd process ok
626: ovs-vswitchd -- switch over to another ovs-vswitchd process ok
627: ovs-vswitchd -- invalid database path ok
ofproto
628: ofproto - echo request ok
629: ofproto - handling messages with bad version ok
630: ofproto - feature request, config request ok
631: ofproto - set OpenFlow port number ok
632: ofproto - port stats - (OpenFlow 1.0) ok
633: ofproto - port stats - (OpenFlow 1.2) ok
634: ofproto - port stats - (OpenFlow 1.4) ok
635: ofproto - port-desc stats (OpenFlow 1.0) ok
636: ofproto - port-desc stats (OpenFlow 1.2) ok
637: ofproto - port-desc stats (OpenFlow 1.5) ok
638: ofproto - queue stats - (OpenFlow 1.0) ok
639: ofproto - queue stats - (OpenFlow 1.2) ok
640: ofproto - queue stats - (OpenFlow 1.4) ok
641: ofproto - queue configuration - (OpenFlow 1.0) ok
642: ofproto - queue configuration - (OpenFlow 1.2) ok
643: ofproto - del group ok
644: ofproto - del group deletes flows ok
645: ofproto - flow mod checks group availability ok
646: ofproto - group description ok
647: ofproto - group description ok
648: ofproto - group features ok
649: ofproto - group stats ok
650: ofproto - mod-port (OpenFlow 1.0) ok
651: ofproto - mod-port (OpenFlow 1.2) ok
652: ofproto - mod-port (OpenFlow 1.4) ok
653: ofproto - basic flow_mod commands (NXM) ok
654: ofproto - basic flow_mod commands (OpenFlow 1.0) ok
655: ofproto - basic flow_mod commands (OpenFlow 1.1) ok
656: ofproto - flow_mod negative test (OpenFlow 1.1) ok
657: ofproto - set-field flow_mod commands (NXM) ok
658: ofproto - basic flow_mod commands (OpenFlow 1.2) ok
659: ofproto - dump flows with cookie ok
660: ofproto - mod flow with cookie change (OpenFlow 1.0) ok
661: ofproto - mod flow with cookie change (NXM) ok
662: ofproto - no mod flow with cookie change (OpenFlow 1.1) ok
663: ofproto - no mod flow with cookie change (OpenFlow 1.2) ok
664: ofproto - mod flows based on cookie mask (OpenFlow 1.0) ok
665: ofproto - mod flows based on cookie mask (OpenFlow 1.1) ok
666: ofproto - mod flows based on cookie mask (OpenFlow 1.2) ok
667: ofproto - mod flows based on cookie mask with cookie change ok
668: ofproto - mod flow with cookie miss (mask==0) - NXM ok
669: ofproto - mod flow with cookie miss (mask==0) - OF1.1 ok
670: ofproto - mod flow with cookie miss (mask==0) - OF1.2 ok
671: ofproto - mod flow with cookie miss (mask!=0) - NXM ok
672: ofproto - mod flow with cookie miss (mask!=0) - OF1.1 ok
673: ofproto - mod flow with cookie miss (mask!=0) - OF1.2 ok
674: ofproto - del flows with cookies ok
675: ofproto - del flows based on cookie ok
676: ofproto - del flows based on cookie mask ok
677: ofproto - del flows based on table id (NXM) ok
678: ofproto - del flows based on table id (OpenFlow 1.1) ok
679: ofproto - del flows based on table id (OpenFlow 1.2) ok
680: ofproto - flow table configuration (OpenFlow 1.0) ok
681: ofproto - flow table configuration (OpenFlow 1.2) ok
682: ofproto - hard limits on flow table size (OpenFlow 1.0) ok
683: ofproto - hard limits on flow table size (OpenFlow 1.2) ok
684: ofproto - eviction upon table overflow (OpenFlow 1.0) ok
685: ofproto - eviction upon table overflow (OpenFlow 1.2) ok
686: ofproto - eviction upon table overflow, with fairness (OpenFlow 1.0) ok
687: ofproto - eviction upon table overflow, with fairness (OpenFlow 1.2) ok
688: ofproto - eviction upon table overflow, with modified hard timeout ok
689: ofproto - eviction upon table overflow, with modified idle timeout ok
690: ofproto - asynchronous message control (OpenFlow 1.0) ok
691: ofproto - asynchronous message control (OpenFlow 1.2) ok
692: ofproto - asynchronous message control (OpenFlow 1.3) ok
693: ofproto - controller role (OpenFlow 1.2) ok
694: ofproto - controller role (OpenFlow 1.4) ok
695: ofproto - packet-out from controller (OpenFlow 1.0) ok
696: ofproto - packet-out from controller (OpenFlow 1.2) ok
697: ofproto - packet-out from controller (OpenFlow 1.1) ok
698: ofproto - packet-out with metadata (NXM) ok
699: ofproto - packet-out with metadata (OpenFlow 1.2) ok
700: ofproto - packet-out with tunnel metadata (OpenFlow 1.2) ok
701: ofproto - flow monitoring ok
702: ofproto - flow monitoring pause and resume skipped (ofproto.at:2351)
703: ofproto - event filtering (OpenFlow 1.3) ok
704: ofproto - ofport_request ok
705: ofproto - bundles, open (OpenFlow 1.4) ok
706: ofproto - bundles, double open (OpenFlow 1.4) ok
707: ofproto - bundle close without open (OpenFlow 1.4) ok
708: ofproto - bundle double close (OpenFlow 1.4) ok
709: ofproto - bundle close, different flags (OpenFlow 1.4) ok
710: ofproto - bundle commit without open (OpenFlow 1.4) ok
711: ofproto - bundle commit, different flags (OpenFlow 1.4) ok
712: ofproto - bundle discard without open (OpenFlow 1.4) ok
ofproto-dpif
713: ofproto-dpif - dummy interface ok
714: ofproto-dpif, active-backup bonding ok
715: ofproto-dpif, balance-slb bonding ok
716: ofproto-dpif, balance-tcp bonding ok
717: ofproto-dpif, balance-tcp bonding, different recirc flow ok
718: ofproto-dpif - resubmit ok
719: ofproto-dpif - goto table ok
720: ofproto-dpif - write actions ok
721: ofproto-dpif - clear actions ok
722: ofproto-dpif - group chaining not supported ok
723: ofproto-dpif - all group in action list ok
724: ofproto-dpif - indirect group in action list ok
725: ofproto-dpif - group actions have no effect afterwards ok
726: ofproto-dpif - all group in action set ok
727: ofproto-dpif - indirect group in action set ok
728: ofproto-dpif - select group ok
729: ofproto-dpif - select group with watch port ok
730: ofproto-dpif - select group with weight ok
731: ofproto-dpif - fast failover group ok
732: ofproto-dpif - registers ok
733: ofproto-dpif - push-pop ok
734: ofproto-dpif - output ok
735: ofproto-dpif - dec_ttl ok
736: ofproto-dpif - dec_ttl without arguments at offset 32 in ofpacts ok
737: ofproto-dpif - dec_ttl with arguments at offset 32 in ofpacts ok
738: ofproto-dpif - note at offset 24 in ofpacts ok
739: ofproto-dpif - output, OFPP_NONE ingress port ok
740: ofproto-dpif - DSCP ok
741: ofproto-dpif - output/flood flags ok
742: ofproto-dpif - Default Table Miss - OF1.0 (OFPTC_TABLE_MISS_CONTROLLER) ok
743: ofproto-dpif - Default Table Miss - OF1.3 (OFPTC_TABLE_MISS_DROP) ok
744: ofproto-dpif - Table Miss - goto table and OFPTC_TABLE_MISS_CONTROLLER ok
745: ofproto-dpif - Table Miss - resubmit and OFPTC_TABLE_MISS_CONTROLLER ok
746: ofproto-dpif - Table Miss - OFPTC_TABLE_MISS_CONTINUE ok
747: ofproto-dpif - Table Miss - goto table and OFPTC_TABLE_MISS_CONTINUE ok
748: ofproto-dpif - Table Miss - resubmit and OFPTC_TABLE_MISS_CONTINUE ok
749: ofproto-dpif - Table Miss - OFPTC_TABLE_MISS_DROP ok
750: ofproto-dpif - Table Miss - goto table and OFPTC_TABLE_MISS_DROP ok
751: ofproto-dpif - Table Miss - resubmit and OFPTC_TABLE_MISS_DROP ok
752: ofproto-dpif - controller ok
753: ofproto-dpif - table-miss flow (OpenFlow 1.0) ok
754: ofproto-dpif - table-miss flow (OpenFlow 1.3) ok
755: ofproto-dpif - ARP modification slow-path ok
756: ofproto-dpif - VLAN handling ok
757: ofproto-dpif - MPLS handling ok
758: ofproto-dpif - VLAN+MPLS handling ok
759: ofproto-dpif - fragment handling ok
760: ofproto-dpif - exit ok
761: ofproto-dpif - mirroring, select_all ok
762: ofproto-dpif - mirroring, select_src ok
763: ofproto-dpif - mirroring, OFPP_NONE ingress port ok
764: ofproto-dpif - mirroring, select_dst ok
765: ofproto-dpif - mirroring, select_vlan ok
766: ofproto-dpif - mirroring, output_port ok
767: ofproto-dpif - mirroring, output_vlan ok
768: ofproto-dpif - ofproto/trace command 1 ok
769: ofproto-dpif - ofproto/trace command 2 ok
770: ofproto-dpif - ofproto/trace-packet-out ok
771: ofproto-dpif - MAC learning ok
772: ofproto-dpif - MAC table overflow ok
773: ofproto-dpif - MAC table overflow fairness ok
774: ofproto-dpif - sFlow packet sampling - IPv4 collector FAILED (ofproto-dpif.at:3489)
775: ofproto-dpif - sFlow packet sampling - IPv6 collector FAILED (ofproto-dpif.at:3490)
776: ofproto-dpif - NetFlow flow expiration - IPv4 collector ok
777: ofproto-dpif - NetFlow flow expiration - IPv6 collector ok
778: ofproto-dpif - NetFlow active expiration - IPv4 collector ok
779: ofproto-dpif - NetFlow active expiration - IPv6 collector ok
780: ofproto-dpif - flow stats ok
781: ofproto-dpif - flow stats, set-n-threads ok
782: idle_age and hard_age increase over time ok
783: ofproto-dpif - fin_timeout ok
784: ofproto-dpif - ovs-appctl dpif/dump-dps ok
785: ofproto-dpif - ovs-appctl dpif/show ok
786: ofproto-dpif - ovs-appctl dpif/dump-flows ok
787: ofproto-dpif - MPLS actions that result in a userspace action ok
788: ofproto-dpif - MPLS actions that result in a drop ok
789: ofproto-dpif - patch ports ok
790: ofproto-dpif - port duration ok
ofproto-dpif -- megaflows
791: ofproto-dpif megaflow - port classification ok
792: ofproto-dpif megaflow - L2 classification ok
793: ofproto-dpif megaflow - L3 classification ok
794: ofproto-dpif megaflow - IPv6 classification ok
795: ofproto-dpif megaflow - L4 classification ok
796: ofproto-dpif megaflow - normal ok
797: ofproto-dpif megaflow - mpls ok
798: ofproto-dpif megaflow - netflow - IPv4 collector ok
799: ofproto-dpif megaflow - netflow - IPv6 collector ok
800: ofproto-dpif megaflow - normal, active-backup bonding ok
801: ofproto-dpif megaflow - normal, balance-slb bonding ok
802: ofproto-dpif megaflow - normal, balance-tcp bonding ok
803: ofproto-dpif megaflow - resubmit port action ok
804: ofproto-dpif megaflow - resubmit table action ok
805: ofproto-dpif megaflow - goto_table action ok
806: ofproto-dpif megaflow - mirroring, select_all ok
807: ofproto-dpif megaflow - mirroring, select_vlan ok
808: ofproto-dpif megaflow - move action ok
809: ofproto-dpif megaflow - push action ok
810: ofproto-dpif megaflow - learning ok
811: ofproto-dpif megaflow - tunnels FAILED (ofproto-dpif.at:4446)
812: ofproto-dpif megaflow - dec_ttl ok
813: ofproto-dpif megaflow - set dl_dst ok
814: ofproto-dpif megaflow - disabled ok
815: ofproto-dpif - datapath port number change ok
816: ofproto - bundle with variable bfd/cfm config ok
817: ofproto-dpif - ofproto-dpif-monitor 1 FAILED (ofproto-dpif.at:4654)
818: ofproto-dpif - ofproto-dpif-monitor 2 FAILED (ofproto-dpif.at:4705)
ofproto-dpif - flow translation resource limits
819: ofproto-dpif - infinite resubmit ok
820: ofproto-dpif - exponential resubmit chain ok
821: ofproto-dpif - too many output actions ok
822: ofproto-dpif - stack too deep ok
823: ofproto-dpif - ICMPv6 ok
824: ofproto-dpif - vlan matching ok
VLAN splinters
825: VLAN splinters ok
OVSDB -- logging
826: create empty, reread ok
827: write one, reread ok
828: check that create fails if file exists ok
829: write one, reread ok
830: write one, reread, append ok
831: write, reread one, overwrite ok
832: write, add corrupted data, read ok
833: write, add corrupted data, read, overwrite ok
834: write, corrupt some data, read, overwrite ok
835: write, truncate file, read, overwrite ok
836: write bad JSON, read, overwrite ok
OVSDB -- atomic types
837: integer - C ok
838: integer - Python ok
839: real - C ok
840: real - Python ok
841: boolean - C ok
842: boolean - Python ok
843: string - C ok
844: string - Python ok
845: uuid - C ok
846: uuid - Python ok
847: void is not a valid atomic-type - C ok
848: void is not a valid atomic-type - Python ok
OVSDB -- base types
849: integer enum - C ok
850: integer enum - Python ok
851: integer >= 5 - C ok
852: integer >= 5 - Python ok
853: integer <= 7 - C ok
854: integer <= 7 - Python ok
855: integer between -5 and 10 - C ok
856: integer between -5 and 10 - Python ok
857: integer max may not be less than min - C ok
858: integer max may not be less than min - Python ok
859: real enum - C ok
860: real enum - Python ok
861: real >= -1.5 - C ok
862: real >= -1.5 - Python ok
863: real <= 1e5 - C ok
864: real <= 1e5 - Python ok
865: real between -2.5 and 3.75 - C ok
866: real between -2.5 and 3.75 - Python ok
867: real max may not be less than min - C ok
868: real max may not be less than min - Python ok
869: boolean - C ok
870: boolean - Python ok
871: boolean enum - C ok
872: boolean enum - Python ok
873: string enum - C ok
874: string enum - Python ok
875: string minLength - C ok
876: string minLength - Python ok
877: string maxLength - C ok
878: string maxLength - Python ok
879: string minLength and maxLength - C ok
880: string minLength and maxLength - Python ok
881: maxLength must not be less than minLength - C ok
882: maxLength must not be less than minLength - Python ok
883: maxLength must not be negative - C ok
884: maxLength must not be negative - Python ok
885: uuid enum - C ok
886: uuid enum - Python ok
887: uuid refTable - C ok
888: uuid refTable - Python ok
889: uuid refTable must be valid id - C ok
890: uuid refTable must be valid id - Python ok
891: void is not a valid base-type - C ok
892: void is not a valid base-type - Python ok
893: "type" member must be present - C ok
894: "type" member must be present - Python ok
OVSDB -- simple types
895: simple integer - C ok
896: simple integer - Python ok
897: simple real - C ok
898: simple real - Python ok
899: simple boolean - C ok
900: simple boolean - Python ok
901: simple string - C ok
902: simple string - Python ok
903: simple uuid - C ok
904: simple uuid - Python ok
905: integer in object - C ok
906: integer in object - Python ok
907: real in object with explicit min and max - C ok
908: real in object with explicit min and max - Python ok
909: key type is required - C ok
910: key type is required - Python ok
911: void is not a valid type - C ok
912: void is not a valid type - Python ok
OVSDB -- set types
913: optional boolean - C ok
914: optional boolean - Python ok
915: set of 1 to 3 uuids - C ok
916: set of 1 to 3 uuids - Python ok
917: set of 0 to 3 strings - C ok
918: set of 0 to 3 strings - Python ok
919: set of 0 or more integers - C ok
920: set of 0 or more integers - Python ok
921: set of 1 or more reals - C ok
922: set of 1 or more reals - Python ok
923: set max cannot be less than min - C ok
924: set max cannot be less than min - Python ok
925: set max cannot be negative - C ok
926: set max cannot be negative - Python ok
927: set min cannot be negative - C ok
928: set min cannot be negative - Python ok
929: set min cannot be greater than one - C ok
930: set min cannot be greater than one - Python ok
OVSDB -- map types
931: map of 1 integer to boolean - C ok
932: map of 1 integer to boolean - Python ok
933: map of 1 boolean to integer, explicit min and max - C ok
934: map of 1 boolean to integer, explicit min and max - Python ok
935: map of 1 to 5 uuid to real - C ok
936: map of 1 to 5 uuid to real - Python ok
937: map of 0 to 10 string to uuid - C ok
938: map of 0 to 10 string to uuid - Python ok
939: map of 1 to 20 real to string - C ok
940: map of 1 to 20 real to string - Python ok
941: map of 0 or more string to real - C ok
942: map of 0 or more string to real - Python ok
943: map key type is required - C ok
944: map key type is required - Python ok
OVSDB -- default values
945: default atoms - C ok
946: default atoms - Python ok
947: default data - C ok
948: default data - Python ok
OVSDB -- atoms without constraints
949: integer atom from JSON - C ok
950: integer atom from JSON - Python ok
951: integer atom from string ok
952: real atom from JSON - C ok
953: real atom from JSON - Python ok
954: real atom from string ok
955: boolean atom from JSON - C ok
956: boolean atom from JSON - Python ok
957: boolean atom from string ok
958: string atom from JSON - C ok
959: string atom from JSON - Python ok
960: string atom from string ok
961: uuid atom from JSON - C ok
962: uuid atom from JSON - Python ok
963: uuid atom from string ok
964: integer atom sorting - C ok
965: integer atom sorting - Python ok
966: real atom sorting - C ok
967: real atom sorting - Python ok
968: boolean atom sorting - C ok
969: boolean atom sorting - Python ok
970: string atom sorting - C ok
971: string atom sorting - Python ok
972: uuid atom sorting - C ok
973: uuid atom sorting - Python ok
974: real not acceptable integer JSON atom - C ok
975: real not acceptable integer JSON atom - Python ok
976: no invalid UTF-8 sequences in strings ok
977: no invalid UTF-8 sequences in strings - Python ok
978: real not acceptable integer string atom ok
979: string "true" not acceptable boolean JSON atom - C ok
980: string "true" not acceptable boolean JSON atom - Python ok
981: string "true" not acceptable boolean string atom ok
982: integer not acceptable string JSON atom - C ok
983: integer not acceptable string JSON atom - Python ok
984: uuid atom must be expressed as JSON array - C ok
985: uuid atom must be expressed as JSON array - Python ok
986: named-uuid requires symbol table - C ok
987: named-uuid requires symbol table - Python ok
988: empty string atom must be quoted ok
989: quotes must be balanced ok
990: quoted string must not contain unescaped quote ok
991: quoted string must not end with backslash ok
992: uuids must be valid ok
OVSDB -- atoms with enum constraints
993: integer atom enum - C ok
994: integer atom enum - Python ok
995: real atom enum - C ok
996: real atom enum - Python ok
997: boolean atom enum - C ok
998: boolean atom enum - Python ok
999: string atom enum - C ok
1000: string atom enum - Python ok
1001: uuid atom enum - C ok
1002: uuid atom enum - Python ok
OVSDB -- atoms with other constraints
1003: integers >= 5 - C ok
1004: integers >= 5 - Python ok
1005: integers <= -1 - C ok
1006: integers <= -1 - Python ok
1007: integers in range -10 to 10 - C ok
1008: integers in range -10 to 10 - Python ok
1009: reals >= 5 - C ok
1010: reals >= 5 - Python ok
1011: reals <= -1 - C ok
1012: reals <= -1 - Python ok
1013: reals in range -10 to 10 - C ok
1014: reals in range -10 to 10 - Python ok
1015: strings at least 2 characters long - C ok
1016: strings at least 2 characters long - Python skipped (ovsdb-data.at:466)
1017: strings no more than 2 characters long - C ok
1018: strings no more than 2 characters long - Python ok
OSVDB -- simple data
1019: integer JSON datum - C ok
1020: integer JSON datum - Python ok
1021: integer string datum ok
1022: real JSON datum - C ok
1023: real JSON datum - Python ok
1024: real string datum ok
1025: boolean JSON datum - C ok
1026: boolean JSON datum - Python ok
1027: boolean string datum ok
1028: string JSON datum - C ok
1029: string JSON datum - Python ok
1030: string string datum ok
OVSDB -- set data
1031: JSON optional boolean - C ok
1032: JSON optional boolean - Python ok
1033: string optional boolean ok
1034: JSON set of 0 or more integers - C ok
1035: JSON set of 0 or more integers - Python ok
1036: string set of 0 or more integers ok
1037: JSON set of 1 to 3 uuids - C ok
1038: JSON set of 1 to 3 uuids - Python ok
1039: string set of 1 to 3 uuids ok
1040: JSON set of 0 to 3 strings - C ok
1041: JSON set of 0 to 3 strings - Python ok
1042: string set of 0 to 3 strings ok
1043: duplicate boolean not allowed in JSON set - C ok
1044: duplicate boolean not allowed in JSON set - Python ok
1045: duplicate boolean not allowed in string set ok
1046: duplicate integer not allowed in JSON set - C ok
1047: duplicate integer not allowed in JSON set - Python ok
1048: duplicate integer not allowed in string set ok
1049: duplicate real not allowed in JSON set - C ok
1050: duplicate real not allowed in JSON set - Python ok
1051: duplicate real not allowed in string set ok
1052: duplicate string not allowed in JSON set - C ok
1053: duplicate string not allowed in JSON set - Python ok
1054: duplicate string not allowed in string set ok
1055: duplicate uuid not allowed in JSON set - C ok
1056: duplicate uuid not allowed in JSON set - Python ok
1057: duplicate uuid not allowed in string set ok
OVSDB -- map data
1058: JSON map of 1 integer to boolean - C ok
1059: JSON map of 1 integer to boolean - Python ok
1060: string map of 1 integer to boolean ok
1061: JSON map of at least 1 integer to boolean - C ok
1062: JSON map of at least 1 integer to boolean - Python ok
1063: string map of at least 1 integer to boolean ok
1064: JSON map of 1 boolean to integer - C ok
1065: JSON map of 1 boolean to integer - Python ok
1066: string map of 1 boolean to integer ok
1067: JSON map of 1 uuid to real - C ok
1068: JSON map of 1 uuid to real - Python ok
1069: string map of 1 uuid to real ok
1070: JSON map of 10 string to string - C ok
1071: JSON map of 10 string to string - Python ok
1072: string map of 10 string to string ok
1073: duplicate integer key not allowed in JSON map - C ok
1074: duplicate integer key not allowed in JSON map - Python ok
1075: duplicate integer key not allowed in string map ok
OVSDB -- columns
1076: ordinary column - C ok
1077: ordinary column - Python ok
1078: immutable column - C ok
1079: immutable column - Python ok
1080: ephemeral column - C ok
1081: ephemeral column - Python ok
OVSDB -- tables
1082: non-root table with one column - C ok
1083: non-root table with one column - Python ok
1084: immutable table with one column - C ok
1085: immutable table with one column - Python ok
1086: root table with one column - C ok
1087: root table with one column - Python ok
1088: non-root table with default_is_root=true - C ok
1089: non-root table with default_is_root=true - Python ok
1090: root table with default_is_root=true - C ok
1091: root table with default_is_root=true - Python ok
1092: table with maxRows of 2 - C ok
1093: table with maxRows of 2 - Python ok
1094: table with index - C ok
1095: table with index - Python ok
1096: table with syntax error in index - C ok
1097: table with syntax error in index - Python ok
1098: table with empty index - C ok
1099: table with empty index - Python ok
1100: table with index of ephemeral column - C ok
1101: table with index of ephemeral column - Python ok
1102: column names may not begin with _ - C ok
1103: column names may not begin with _ - Python ok
1104: table must have at least one column (1) - C ok
1105: table must have at least one column (1) - Python ok
1106: table must have at least one column (2) - C ok
1107: table must have at least one column (2) - Python ok
1108: table maxRows must be positive - C ok
1109: table maxRows must be positive - Python ok
OVSDB -- rows
1110: row with one string column ok
1111: row with one integer column ok
1112: row with one real column ok
1113: row with one boolean column ok
1114: row with one uuid column ok
1115: row with set of 1 to 2 elements ok
1116: row with map of 1 to 2 elements ok
1117: row with several columns ok
1118: row hashing (scalars) ok
1119: row hashing (sets) ok
1120: row hashing (maps) ok
OVSDB -- schemas
1121: schema with valid refTables - C ok
1122: schema with valid refTables - Python ok
1123: schema with ephemeral strong references - C ok
1124: schema with ephemeral strong references - Python ok
1125: schema without version number - C ok
1126: schema without version number - Python ok
1127: schema with invalid refTables - C ok
1128: schema with invalid refTables - Python ok
1129: schema with invalid version number - C ok
1130: schema with invalid version number - Python ok
OVSDB -- conditions
1131: null condition ok
1132: conditions on scalars ok
1133: disallowed conditions on scalars ok
1134: conditions on sets ok
1135: condition sorting ok
1136: evaluating null condition ok
1137: evaluating conditions on integers ok
1138: evaluating conditions on reals ok
1139: evaluating conditions on booleans ok
1140: evaluating conditions on strings ok
1141: evaluating conditions on UUIDs ok
1142: evaluating conditions on sets ok
1143: evaluating conditions on maps (1) ok
1144: evaluating conditions on maps (2) ok
OVSDB -- mutations
1145: null mutation ok
1146: mutations on scalars ok
1147: disallowed mutations on scalars ok
1148: disallowed mutations on immutable columns ok
1149: mutations on sets ok
1150: executing null mutation ok
1151: executing mutations on integers ok
1152: integer overflow detection ok
1153: executing mutations on integers with constraints ok
1154: executing mutations on reals ok
1155: real overflow detection ok
1156: executing mutations on reals with constraints ok
1157: executing mutations on integer sets ok
1158: executing mutations on integer sets with constraints ok
1159: executing mutations on real sets ok
1160: executing mutations on boolean sets ok
1161: executing mutations on string sets ok
1162: executing mutations on uuid sets ok
1163: executing mutations on integer maps ok
OVSDB -- queries
1164: queries on scalars ok
1165: queries on sets ok
1166: queries on maps (1) ok
1167: queries on maps (2) ok
1168: UUID-distinct queries on scalars ok
1169: Boolean-distinct queries on scalars ok
1170: parse colunn set containing bad name ok
OVSDB -- transactions
1171: empty table, empty transaction ok
1172: nonempty table, empty transaction ok
1173: insert, commit ok
1174: insert, abort ok
1175: modify, commit ok
1176: modify, abort ok
1177: delete, commit ok
1178: delete, abort ok
1179: modify, delete, commit ok
1180: modify, delete, abort ok
1181: insert, delete, commit ok
1182: insert, delete, abort ok
1183: insert, modify, delete, commit ok
1184: insert, modify, delete, abort ok
1185: deletes are aborted cleanly ok
OVSDB -- execution
1186: uuid-name must be <id> ok
1187: named-uuid must be <id> ok
1188: duplicate uuid-name not allowed ok
1189: insert default row, query table ok
1190: insert row, query table ok
1191: insert rows, query by value ok
1192: insert rows, query by named-uuid ok
1193: insert rows, update rows by value ok
1194: insert rows, mutate rows ok
1195: insert rows, delete by named-uuid ok
1196: insert rows, delete rows by value ok
1197: insert rows, delete by (non-matching) value ok
1198: insert rows, delete all ok
1199: insert row, query table, commit ok
1200: insert row, query table, commit durably ok
1201: equality wait with correct rows ok
1202: equality wait with extra row ok
1203: equality wait with missing row ok
1204: inequality wait with correct rows ok
1205: inequality wait with extra row ok
1206: inequality wait with missing row ok
1207: insert and update constraints ok
1208: index uniqueness checking ok
1209: referential integrity -- simple ok
1210: referential integrity -- mutual references ok
1211: weak references ok
1212: immutable columns ok
1213: garbage collection ok
OVSDB -- triggers
1214: trigger fires immediately ok
1215: trigger times out ok
1216: trigger fires after delay ok
1217: delayed trigger modifies database ok
1218: one delayed trigger wakes up another ok
OVSDB -- ovsdb-tool
1219: insert default row, query table ok
1220: insert row, query table ok
1221: insert rows, query by value ok
1222: insert rows, query by named-uuid ok
1223: insert rows, update rows by value ok
1224: insert rows, mutate rows ok
1225: insert rows, delete by named-uuid ok
1226: insert rows, delete rows by value ok
1227: insert rows, delete by (non-matching) value ok
1228: insert rows, delete all ok
1229: insert row, query table, commit ok
1230: insert row, query table, commit durably ok
1231: equality wait with correct rows ok
1232: equality wait with extra row ok
1233: equality wait with missing row ok
1234: inequality wait with correct rows ok
1235: inequality wait with extra row ok
1236: inequality wait with missing row ok
1237: insert and update constraints ok
1238: index uniqueness checking ok
1239: referential integrity -- simple ok
1240: referential integrity -- mutual references ok
1241: weak references ok
1242: immutable columns ok
1243: garbage collection ok
1244: transaction comments ok
1245: ovsdb-tool compact ok
1246: ovsdb-tool convert -- removing a column ok
1247: ovsdb-tool convert -- adding a column ok
1248: ovsdb-tool schema-version ok
1249: ovsdb-tool db-version ok
1250: ovsdb-tool schema-cksum ok
1251: ovsdb-tool db-cksum ok
1252: ovsdb-tool needs-conversion (no conversion needed) ok
1253: ovsdb-tool needs-conversion (conversion needed) ok
OVSDB -- ovsdb-server transactions (Unix sockets)
1254: insert default row, query table ok
1255: insert row, query table ok
1256: insert rows, query by value ok
1257: insert rows, query by named-uuid ok
1258: insert rows, update rows by value ok
1259: insert rows, mutate rows ok
1260: insert rows, delete by named-uuid ok
1261: insert rows, delete rows by value ok
1262: insert rows, delete by (non-matching) value ok
1263: insert rows, delete all ok
1264: insert row, query table, commit ok
1265: insert row, query table, commit durably ok
1266: equality wait with correct rows ok
1267: equality wait with extra row ok
1268: equality wait with missing row ok
1269: inequality wait with correct rows ok
1270: inequality wait with extra row ok
1271: inequality wait with missing row ok
1272: insert and update constraints ok
1273: index uniqueness checking ok
1274: referential integrity -- simple ok
1275: referential integrity -- mutual references ok
1276: weak references ok
1277: immutable columns ok
1278: garbage collection ok
ovsdb-server miscellaneous features
1279: truncating corrupted database log ok
1280: truncating database log with bad transaction ok
1281: ovsdb-client get-schema-version ok
1282: database multiplexing implementation ok
1283: ovsdb-server/add-db and remove-db ok
1284: ovsdb-server/add-db with --monitor ok
1285: ovsdb-server/add-db and remove-db with --monitor ok
1286: --remote=db: implementation ok
1287: ovsdb-server/add-remote and remove-remote ok
1288: ovsdb-server/add-remote with --monitor ok
1289: ovsdb-server/add-remote and remove-remote with --monitor ok
1290: SSL db: implementation ok
1291: compacting online ok
1292: ovsdb-server combines updates on backlogged connections skipped (ovsdb-server.at:681)
OVSDB -- ovsdb-server transactions (SSL IPv4 sockets)
1293: insert default row, query table ok
1294: insert row, query table ok
1295: insert rows, query by value ok
1296: insert rows, query by named-uuid ok
1297: insert rows, update rows by value ok
1298: insert rows, mutate rows ok
1299: insert rows, delete by named-uuid ok
1300: insert rows, delete rows by value ok
1301: insert rows, delete by (non-matching) value ok
1302: insert rows, delete all ok
1303: insert row, query table, commit ok
1304: insert row, query table, commit durably ok
1305: equality wait with correct rows ok
1306: equality wait with extra row ok
1307: equality wait with missing row ok
1308: inequality wait with correct rows ok
1309: inequality wait with extra row ok
1310: inequality wait with missing row ok
1311: insert and update constraints ok
1312: index uniqueness checking ok
1313: referential integrity -- simple ok
1314: referential integrity -- mutual references ok
1315: weak references ok
1316: immutable columns ok
1317: garbage collection ok
OVSDB -- ovsdb-server transactions (SSL IPv6 sockets)
1318: insert default row, query table ok
OVSDB -- ovsdb-server transactions (TCP IPv4 sockets)
1319: ovsdb-client get-schema-version - tcp socket ok
1320: insert default row, query table ok
1321: insert row, query table ok
1322: insert rows, query by value ok
1323: insert rows, query by named-uuid ok
1324: insert rows, update rows by value ok
1325: insert rows, mutate rows ok
1326: insert rows, delete by named-uuid ok
1327: insert rows, delete rows by value ok
1328: insert rows, delete by (non-matching) value ok
1329: insert rows, delete all ok
1330: insert row, query table, commit ok
1331: insert row, query table, commit durably ok
1332: equality wait with correct rows ok
1333: equality wait with extra row ok
1334: equality wait with missing row ok
1335: inequality wait with correct rows ok
1336: inequality wait with extra row ok
1337: inequality wait with missing row ok
1338: insert and update constraints ok
1339: index uniqueness checking ok
1340: referential integrity -- simple ok
1341: referential integrity -- mutual references ok
1342: weak references ok
1343: immutable columns ok
1344: garbage collection ok
OVSDB -- ovsdb-server transactions (TCP IPv6 sockets)
1345: insert default row, query table ok
OVSDB -- transactions on transient ovsdb-server
1346: insert default row, query table ok
1347: insert row, query table ok
1348: insert rows, query by value ok
1349: insert rows, query by named-uuid ok
1350: insert rows, update rows by value ok
1351: insert rows, mutate rows ok
1352: insert rows, delete by named-uuid ok
1353: insert rows, delete rows by value ok
1354: insert rows, delete by (non-matching) value ok
1355: insert rows, delete all ok
1356: insert row, query table, commit ok
1357: insert row, query table, commit durably ok
1358: equality wait with correct rows ok
1359: equality wait with extra row ok
1360: equality wait with missing row ok
1361: inequality wait with correct rows ok
1362: inequality wait with extra row ok
1363: inequality wait with missing row ok
1364: insert and update constraints ok
1365: index uniqueness checking ok
1366: referential integrity -- simple ok
1367: referential integrity -- mutual references ok
1368: weak references ok
1369: immutable columns ok
1370: garbage collection ok
OVSDB -- ovsdb-server monitors
1371: monitor insert into empty table ok
1372: monitor insert into populated table ok
1373: monitor delete ok
1374: monitor row update ok
1375: monitor no-op row updates ok
1376: monitor insert-and-update transaction ok
1377: monitor insert-update-and-delete transaction ok
1378: monitor weak reference change ok
1379: monitor insert-update-and-delete transaction ok
ovsdb -- ovsdb-monitor monitor only some operations
1380: monitor all operations ok
1381: monitor initial only ok
1382: monitor insert only ok
1383: monitor delete only ok
1384: monitor modify only ok
OVSDB -- interface description language (IDL)
1385: simple idl, initially empty, no ops - C ok
1386: simple idl, initially empty, no ops - Python ok
1387: simple idl, initially empty, no ops - Python tcp ok
1388: simple idl, initially empty, no ops - Python tcp6 ok
1389: simple idl, initially empty, various ops - C ok
1390: simple idl, initially empty, various ops - Python ok
1391: simple idl, initially empty, various ops - Python tcp ok
1392: simple idl, initially empty, various ops - Python tcp6 ok
1393: simple idl, initially populated - C ok
1394: simple idl, initially populated - Python ok
1395: simple idl, initially populated - Python tcp ok
1396: simple idl, initially populated - Python tcp6 ok
1397: simple idl, writing via IDL - C ok
1398: simple idl, writing via IDL - Python ok
1399: simple idl, writing via IDL - Python tcp ok
1400: simple idl, writing via IDL - Python tcp6 ok
1401: simple idl, handling verification failure - C ok
1402: simple idl, handling verification failure - Python ok
1403: simple idl, handling verification failure - Python tcp ok
1404: simple idl, handling verification failure - Python tcp6 ok
1405: simple idl, increment operation - C ok
1406: simple idl, increment operation - Python ok
1407: simple idl, increment operation - Python tcp ok
1408: simple idl, increment operation - Python tcp6 ok
1409: simple idl, aborting - C ok
1410: simple idl, aborting - Python ok
1411: simple idl, aborting - Python tcp ok
1412: simple idl, aborting - Python tcp6 ok
1413: simple idl, destroy without commit or abort - C ok
1414: simple idl, destroy without commit or abort - Python ok
1415: simple idl, destroy without commit or abort - Python tcp ok
1416: simple idl, destroy without commit or abort - Python tcp6 ok
1417: self-linking idl, consistent ops - C ok
1418: self-linking idl, consistent ops - Python ok
1419: self-linking idl, consistent ops - Python tcp ok
1420: self-linking idl, consistent ops - Python tcp6 ok
1421: self-linking idl, inconsistent ops - C ok
1422: self-linking idl, inconsistent ops - Python ok
1423: self-linking idl, inconsistent ops - Python tcp ok
1424: self-linking idl, inconsistent ops - Python tcp6 ok
1425: self-linking idl, sets - C ok
1426: self-linking idl, sets - Python ok
1427: self-linking idl, sets - Python tcp ok
1428: self-linking idl, sets - Python tcp6 ok
1429: external-linking idl, consistent ops - C ok
1430: external-linking idl, consistent ops - Python ok
1431: external-linking idl, consistent ops - Python tcp ok
1432: external-linking idl, consistent ops - Python tcp6 ok
1433: external-linking idl, insert ops - Python ok
1434: getattr idl, insert ops - Python ok
ovs-vsctl unit tests
1435: ovs-vsctl connection retry ok
ovs-vsctl unit tests -- real bridges
1436: add-br a ok
1437: add-br a, add-br a ok
1438: add-br a, add-br b ok
1439: add-br a, add-br b, del-br a ok
1440: add-br a, del-br a, add-br a ok
1441: add-br a, add-port a a1, add-port a a2 ok
1442: add-br a, add-port a a1, add-port a a1 ok
1443: add-br a b, add-port a a1, add-port b b1, del-br a ok
1444: add-br a, add-bond a bond0 a1 a2 a3 ok
1445: add-br a b, add-port a a1, add-port b b1, del-port a a1 ok
1446: add-br a, add-bond a bond0 a1 a2 a3, del-port bond0 ok
1447: external IDs ok
1448: controllers ok
ovs-vsctl unit tests -- fake bridges (VLAN 9)
1449: simple fake bridge (VLAN 9) ok
1450: list bridges -- real and fake (VLAN 9) ok
1451: simple fake bridge + del-br fake bridge (VLAN 9) ok
1452: simple fake bridge + del-br real bridge (VLAN 9) ok
1453: simple fake bridge + external IDs (VLAN 9) ok
ovs-vsctl unit tests -- fake bridges (VLAN 0)
1454: simple fake bridge (VLAN 0) ok
1455: list bridges -- real and fake (VLAN 0) ok
1456: simple fake bridge + del-br fake bridge (VLAN 0) ok
1457: simple fake bridge + del-br real bridge (VLAN 0) ok
1458: simple fake bridge + external IDs (VLAN 0) ok
1459: fake bridge on bond ok
1460: fake bridge on bond + del-br fake bridge ok
1461: fake bridge on bond + del-br real bridge ok
ovs-vsctl unit tests -- manager commands
1462: managers ok
ovs-vsctl unit tests -- database commands
1463: database commands -- positive checks ok
1464: database commands -- negative checks ok
1465: database commands -- conditions ok
1466: database commands -- wait-until immediately true ok
1467: database commands -- wait-until must wait ok
1468: --id option on create, get commands ok
1469: unreferenced record warnings ok
1470: created row UUID is wrong in same execution ok
1471: --all option on destroy command ok
ovs-vsctl add-port -- reserved port names
1472: add-port -- reserved names 1 FAILED (ovs-vsctl.at:1205)
1473: add-port -- reserved names 2 FAILED (ovs-vsctl.at:1233)
ovs-monitor-ipsec
1474: ovs-monitor-ipsec ok
ovs-xapi-sync
1475: ovs-xapi-sync ok
interface-reconfigure
1476: non-VLAN, non-bond ok
1477: VLAN, non-bond ok
1478: Bond, non-VLAN ok
1479: VLAN on bond ok
1480: Re-create port with different types FAILED (interface-reconfigure.at:1038)
Spanning Tree Protocol unit tests
1481: STP example from IEEE 802.1D-1998 ok
1482: STP example from IEEE 802.1D-2004 figures 17.4 and 17.5 ok
1483: STP example from IEEE 802.1D-2004 figure 17.6 ok
1484: STP example from IEEE 802.1D-2004 figure 17.7 ok
1485: STP.io.1.1: Link Failure ok
1486: STP.io.1.2: Repeated Network ok
1487: STP.io.1.4: Network Initialization ok
1488: STP.io.1.5: Topology Change ok
1489: STP.op.1.1 and STP.op.1.2 ok
1490: STP.op.1.4: All Ports Initialized to Designated Ports ok
1491: STP.op.3.1: Root Bridge Selection: Root ID Values ok
1492: STP.op.3.3: Root Bridge Selection: Bridge ID Values ok
1493: STP.op.3.3: Root Bridge Selection: Bridge ID Values ok
vlog
1494: vlog - Python ok
1495: vlog - vlog/reopen - Python ok
1496: vlog - vlog/reopen without log file - Python ok
1497: vlog - vlog/reopen can't reopen log file - Python skipped (vlog.at:155)
1498: vlog - vlog/set and vlog/list - Python ok
vtep-ctl unit tests -- physical switch tests
1499: add-ps a ok
1500: add-ps a, add-ps a ok
1501: add-ps a, add-ps b ok
1502: add-ps a, add-ps b, del-ps a ok
1503: add-ps a, del-ps a, add-ps a ok
1504: add-ps a, add-port a a1, add-port a a2 ok
1505: add-ps a, add-port a a1, add-port a a1 ok
1506: add-ps a b, add-port a a1, add-port b b1, del-ps a ok
1507: add-ps a b, add-port a a1, add-port b b1, del-port a a1 ok
1508: add-ps a b, add-port a p1, add-port b p1, del-port a p1 ok
vtep-ctl unit tests -- logical switch tests
1509: add-ls a ok
1510: add-ls a, add-ls a ok
1511: add-ls a, add-ls b ok
1512: add-ls a, add-ls b, del-ls a ok
1513: add-ls a, del-ls a, add-ls a ok
vtep-ctl unit tests -- logical binding tests
1514: bind-ls ps1 pp1 300 ls1 ok
1515: bind-ls ps1 pp1 300 ls1, bind-ls ps1 pp1 400 ls2 ok
1516: bind-ls ps1 pp1 300, bind-ls ps2 pp2 300 ls2 ok
vtep-ctl unit tests -- MAC binding tests
1517: add-ucast-local ls1 ok
1518: add-ucast-local ls1, overwrite ok
1519: add-ucast-local ls1, del-ucast-local ls1 ok
1520: add-ucast-remote ls1 ok
1521: add-ucast-remote ls1, overwrite ok
1522: add-ucast-remote ls1, del-ucast-remote ls1 ok
1523: add-ucast-local ls1, add-ucast-remote ls1 ok
1524: add-mcast-local ls1 ok
1525: add-mcast-local ls1, del-mcast-local ls1 ok
1526: add-mcast-remote ls1 ok
1527: add-mcast-remote ls1, del-mcast-remote ls1 ok
1528: add-mcast-local ls1, add-mcast-remote ls1 ok
1529: add local and remote macs, clear-local-macs ok
1530: add local and remote macs, clear-remote-macs ok
vtep-ctl unit tests -- manager commands
1531: managers ok
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: 1526 tests were run,
21 failed (1 expected failure).
5 tests were skipped.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <[email protected]>
Subject: [openvswitch 2.3.2] testsuite: 5 12 31 578 579 580 581 582 583 584 586 588 774 775 811 817 818 1472 1473 1480 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:4555: recipe for target 'check-local' failed
make[4]: *** [check-local] Error 1
make[4]: Leaving directory '$(@D)'
Makefile:3880: recipe for target 'check-am' failed
make[3]: *** [check-am] Error 2
make[3]: Leaving directory '$(@D)'
Makefile:3589: recipe for target 'check-recursive' failed
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory '$(@D)'
Makefile:3883: recipe for target 'check' failed
make[1]: *** [check] Error 2
make[1]: Leaving directory '$(@D)'