#!/bin/ksh -p

#

# CDDL HEADER START

#

# The contents of this file are subject to the terms of the

# Common Development and Distribution License (the "License").

# You may not use this file except in compliance with the License.

#

# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE

# or http://www.opensolaris.org/os/licensing.

# See the License for the specific language governing permissions

# and limitations under the License.

#

# When distributing Covered Code, include this CDDL HEADER in each

# file and include the License file at usr/src/OPENSOLARIS.LICENSE.

# If applicable, add the following below this CDDL HEADER, with the

# fields enclosed by brackets "[]" replaced with your own identifying

# information: Portions Copyright [yyyy] [name of copyright owner]

#

# CDDL HEADER END

#

#

# Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.

#

#

# Resetting GZ_IMAGE to something besides slash allows for simplified

# debugging of various global zone image configurations-- simply make

# an image somewhere with the appropriate interesting parameters.

#

GZ_IMAGE=${GZ_IMAGE:-/}

PKG_IMAGE=$GZ_IMAGE

export PKG_IMAGE

. /usr/lib/brand/ipkg/common.ksh

f_a_obs=$(gettext "-a publisher=uri option is obsolete, use -P instead.")

f_pkg5_missing=$(gettext "pkg(5) does not seem to be present on this system.\n")

f_no_pref_publisher=$(gettext "Unable to get global zone preferred publisher information, and none was supplied.\nYou must specify one using the -P option.")

f_key_file=$(gettext "Key file not allowed without -P")

f_cert_file=$(gettext "Cert file not allowed without -P")

f_img=$(gettext "failed to create image\n")

f_pkg=$(gettext "failed to install package\n")

f_interrupted=$(gettext "Installation cancelled due to interrupt.\n")

f_bad_publisher=$(gettext "Syntax error in publisher information.")

f_no_entire_in_pref=$(gettext "Unable to locate the incorporation '%s' in the preferred publisher '%s'.\nUse -P to supply a publisher which contains this package.\n")

f_key_prop=$(gettext "Unable to propagate key %s to %s")

f_cert_prop=$(gettext "Unable to propagate cert %s to %s")

f_get_secinfo=$(gettext "Failed to get key/cert information for publisher %s")

f_nosuch_key=$(gettext "Failed to find key %s")

f_nosuch_cert=$(gettext "Failed to find cert %s")

m_publisher=$(gettext   "   Publisher: Using %s (%s).")

m_cache=$(gettext       "       Cache: Using %s.")

m_image=$(gettext       "       Image: Preparing at %s.")

m_incorp=$(gettext      "Sanity Check: Looking for 'entire' incorporation.\n")

m_key_prop=$(gettext    " Credentials: Propagating %s\n")

m_cert_prop=$(gettext   " Credentials: Propagating %s\n")

m_core=$(gettext	"  Installing: Core System (output follows)\n")

m_more=$(gettext	"  Installing: Additional Packages (output follows)\n")

m_smf=$(gettext		" Postinstall: Copying SMF seed repository ...")

m_more_brokenness=$(gettext " Postinstall: Applying workarounds.")

m_mannote=$(gettext     "        Note: Man pages can be obtained by installing SUNWman")

m_usage=$(gettext "\n        install [-h]\n        install [-c certificate_file] [-k key_file] [-P publisher=uri]\n                [-e extrapkg [...]]\n        install {-a archive|-d path} {-p|-u} [-s|-v]")

m_done=$(gettext      " done.")

trap_cleanup() {

	print "$f_interrupted"

	exit $int_code

}

int_code=$ZONE_SUBPROC_NOTCOMPLETE

trap trap_cleanup INT

extra_packages=""

ZONENAME=""

ZONEPATH=""

pub_and_origins=""

pub_and_mirrors=""

# Setup i18n output

TEXTDOMAIN="SUNW_OST_OSCMD"

export TEXTDOMAIN

KEYDIR=/var/pkg/ssl

PKG=/usr/bin/pkg

#

# Just in case.  This should probably be removed later.

#

[[ ! -x $PKG ]] && fail_incomplete "$f_pkg5_missing"

certfile="None"

keyfile="None"

unset install_archive

unset source_dir

unset msg

unset silent_mode

unset verbose_mode

while getopts "a:c:d:e:hk:P:pR:suvz:" opt; do

	case $opt in

		a)	# We're expecting a path to an archive

			if [[ ! -f $OPTARG ]]; then

				# If old style 'pub=uri' parameter then error.

				echo $OPTARG | egrep -s =

				if (( $? == 0 )); then

					fail_usage "$f_a_obs"

				fi

			fi

			install_archive="-a $OPTARG";;

		c)	certfile="$OPTARG" ;;

		d)	source_dir="-d $OPTARG";;

		e)	extra_packages="$extra_packages $OPTARG" ;;

		h)	fail_usage "";;

		k)	keyfile="$OPTARG" ;;

		P)	pub_and_origins="$OPTARG" ;;

		p)	preserve_zone="-p";;

		R)	ZONEPATH="$OPTARG" ;;

		s)	silent_mode=1;;

		u)	unconfig_zone="-u";;

		v)	verbose_mode="-v";;

		z)	ZONENAME="$OPTARG" ;;

		*)	fail_usage "";;

	esac

done

shift $((OPTIND-1))

if [[ -z $ZONEPATH || -z $ZONENAME ]]; then

	print -u2 "Brand error: No zone path or name"

	exit $ZONE_SUBPROC_USAGE

fi

# XXX shared/common script currently uses lower case zonename & zonepath

zonename="$ZONENAME"

zonepath="$ZONEPATH"

is_brand_labeled

brand_labeled=$?

ZONEROOT=$ZONEPATH/root

secinfo=""

# An image install can't use both -a AND -d...

[[ -n "$install_archive" && -n "$source_dir" ]] &&

    fail_usage "$f_incompat_options" "-a" "-d"

# The install can't be both verbose AND silent...

[[ -n $silent_mode && -n $verbose_mode ]] && \

    fail_usage "$f_incompat_options" "-s" "-v"

# The install can't both preserve and unconfigure

[[ -n $unconfig_zone && -n $preserve_zone ]] && \

    fail_usage "$f_incompat_options" "-u" "-p"

# IPS options aren't allowed when installing from a system image.

if [[ -n "$install_archive" || -n "$source_dir" ]]; then

	[[ -n $pub_and_origins ]] && fail_usage "$f_incompat_options" \

	    "-a|-d" "-P"

	[[ -n "$extra_packages" ]] && \

	    fail_usage "$f_incompat_options" "-a|-d" "-e"

	[[ "$certfile" != "None" ]] && \

	    fail_usage "$f_incompat_options" "-a|-d" "-c"

	[[ "$keyfile" != "None" ]] && \

	    fail_usage "$f_incompat_options" "-a|-d" "-k"

fi

# p2v options aren't allowed when installing from a repo.

if [[ -z $install_archive && -z $source_dir ]]; then

	[[ -n $preserve_zone || -n $unconfig_zone ]] && \

		fail_usage "$f_incompat_options" "default" "-p|-u"

fi

#

# If the user didn't give us a publisher, and there's a preferred publisher set

# for the system, set that as the default.

#

propagate_secinfo=

propagate_extra=

if [[ -z $pub_and_origins ]]; then

	if [[ $keyfile != "None" ]]; then

		fail_usage "$f_key_file"

	fi

	if [[ $certfile != "None" ]]; then

		fail_usage "$f_cert_file"

	fi

	# Look for a preferred online origin.

	tpub_and_origins=$(get_publisher_urls preferred origin)

	[[ $? -eq 0 && -n $tpub_and_origins ]] && \

	    pub_and_origins="$tpub_and_origins"

	# Get preferred mirror information as well if the above succeeded.

	if [[ -n "$tpub_and_origins" ]]; then

		tpub_and_mirrors=$(get_publisher_urls preferred mirror)

		[[ $? -eq 0 && -n $tpub_and_mirrors ]] && \

		    pub_and_mirrors="$tpub_and_mirrors"

	fi

	# Note that later we need to propagate key & cert.

	propagate_secinfo=1

	#

	# since the user didn't specify a publisher, propagate all the

	# publishers that don't have a key.

	#

	propagate_extra=1

fi

[[ -z $pub_and_origins ]] && fail_usage "$f_no_pref_publisher"

# find the remaining publishers in the global zone

publishers_extra_origins=""

publishers_extra_mirrors=""

if [[ -n $propagate_extra ]]; then

	# If cert and key information are ever allowed at the origin or

	# mirror level, then this will have to be changed.

	get_publisher_urls non-preferred origin | \

	    while IFS="=" read pub pub_urls; do

		# skip extra publishers that need a key/cert

		[[ "`get_pub_secinfo $pub`" != "None None" ]] && \

		    continue

		if [[ -z "$publishers_extra_origins" ]]; then

			publishers_extra_origins="$pub=$pub_urls"

		else

			publishers_extra_origins=`printf "%s\n%s" \

			    "$pub=$pub_urls" \

			    "$publishers_extra_origins"`

		fi

	done

	get_publisher_urls non-preferred mirror | \

	    while IFS="=" read pub pub_urls; do

		# skip extra publishers that need a key/cert

		[[ "`get_pub_secinfo $pub`" != "None None" ]] && \

		    continue

		if [[ -z "$publishers_extra_mirrors" ]]; then

			publishers_extra_mirrors="$pub=$pub_urls"

		else

			publishers_extra_mirrors=`printf "%s\n%s" \

			    "$pub=$pub_urls" \

			    "$publishers_extra_mirrors"`

		fi

	done

fi

#

# Crack pub=url into two pieces.

#

echo $pub_and_origins | IFS="=" read publisher pub_origins

if [[ -z $publisher || -z $pub_origins ]]; then

	fail_usage "$f_bad_publisher"

fi

echo $pub_and_mirrors | IFS="=" read ignored pub_mirrors

if [[ -n $propagate_secinfo ]]; then

	#

	# Get the global zone's cert and key (if any) so that we can propagate

	# them into the new image.

	#

	get_pub_secinfo $publisher | read keyfile certfile

	if [[ $? -ne 0 ]]; then

		fail_usage "$f_get_secinfo" $publisher

	fi

fi

#

# Do some sanity checks on key and cert.

#

[[ $keyfile != "None" && ! -f $keyfile ]] && \

    fail_usage "$f_nosuch_key" $keyfile

[[ $certfile != "None" && ! -f $certfile ]] && \

    fail_usage "$f_nosuch_cert" $certfile

#

# Look for the 'entire' incorporation's FMRI in the current image; due to users

# doing weird machinations with their publishers, we strip off the publisher

# from the FMRI if it is present.

# It's ok to not find entire in the current image, since this means the user

# can install pre-release development bits for testing purposes.

#

entire_fmri=$(get_entire_incorp)

#

# Before installing the zone, set up ZFS dataset hierarchy for the zone root

# dataset.

#

create_active_ds

#

# If we're installing from an image, branch off to that installer.

#

if [[ -n $install_archive || -n $source_dir ]]; then

	/usr/lib/brand/ipkg/image_install $ZONENAME $ZONEPATH \

	    $install_archive $source_dir $verbose_mode $silent_mode \

	    $unconfig_zone $preserve_zone

	ii_result=$?

	if (( $ii_result != 0 )); then

		exit $ZONE_SUBPROC_NOTCOMPLETE

	fi

	exit $ZONE_SUBPROC_OK

fi

# Display preferred publisher origin and mirror information.

printf "$m_publisher\n" $publisher "$pub_origins $pub_mirrors"

# Display extra publisher origin and mirror information.  This does mean that

# the extras have to be displayed twice to show mirror information.

if [[ -n "$publishers_extra_origins" ]]; then

	echo "$publishers_extra_origins" | while IFS="=" read pub pub_urls; do

		printf "$m_publisher\n" $pub "$pub_urls"

	done

	if [[ -n "$publishers_extra_mirrors" ]]; then

		echo "$publishers_extra_mirrors" | while IFS="=" read pub pub_urls; do

			printf "$m_publisher\n" $pub "$pub_urls"

		done

	fi

fi

printf "$m_image\n" $ZONEROOT

#

# We copy the credentials from the global zone into the new image

# we're about to create.

#

if [[ $keyfile != "None" ]]; then

	newkeylocation="$KEYDIR/$(basename $keyfile)"

	secinfo="$secinfo -k $newkeylocation"

	printf "$m_key_prop\n" $(basename $keyfile)

	mkdir -p -m 755 $ZONEROOT/$KEYDIR || fail_fatal "$f_key_prop"

	cp $keyfile $ZONEROOT/$newkeylocation || fail_fatal "$f_key_prop"

	chmod 644 $ZONEROOT/$newkeylocation

	chown -h root:root $ZONEROOT/$newkeylocation

fi

if [[ $certfile != "None" ]]; then

	newcertlocation="$KEYDIR/$(basename $certfile)"

	secinfo="$secinfo -c $newcertlocation"

	printf "$m_cert_prop\n" $(basename $certfile)

	mkdir -p -m 755 $ZONEROOT/$KEYDIR || fail_fatal "$f_cert_prop"

	cp $certfile $ZONEROOT/$newcertlocation || fail_fatal "$f_cert_prop"

	chmod 644 $ZONEROOT/$newkeylocation

	chown -h root:root $ZONEROOT/$newkeylocation

fi

#

# Regrettably, since we already copied the key information into place,

# we must pass the -f (force) option to image-create, since it thinks that

# something must be wrong, as the image exists.

#

pub_first_origin=""

pub_add_origins=""

for origin in $pub_origins; do

	if [[ -z "$pub_first_origin" ]]; then

		# The first origin is semi-special in that the publisher

		# argument to image-create requires it to be specified

		# by itself and then any additional origins after that.

		# Technically, image-create doesn't care if you specify

		# the first one again using -g, but there's no point in

		# doing so.

		pub_first_origin=$origin

		continue

	fi

	pub_add_origins="${pub_add_origins}-g $origin "

done

pub_add_mirrors=""

for mirror in $pub_mirrors; do

	pub_add_mirrors="${pub_add_mirrors}-m $mirror "

done

#

# The image is created with --no-refresh so that all of the publisher

# configuration can be put into place first before attempting to retrieve

# and build catalog information.  This substantially reduces the amount of

# time needed to create a zone.

#

LC_ALL=C $PKG image-create -f --no-refresh --zone --full \

    -p $publisher=$pub_first_origin $pub_add_origins $pub_add_mirrors $secinfo \

    $ZONEROOT || fail_incomplete "$f_img"

# Retrieve publisher attributes and update our new publisher

attrs=$(get_publisher_attr_args $publisher "origin")

# Change the value of PKG_IMAGE so that future PKG operation will work

# on the newly created zone rather than the global zone

PKG_IMAGE="$ZONEROOT"

export PKG_IMAGE

# --no-refresh is used here so that update operations can be

# coalesced.

# Update our new publisher

LC_ALL=C $PKG set-publisher --no-refresh $attrs $publisher \

    || fail_incomplete "$f_img"

# add extra publishers

# If cert and key information are ever allowed at the origin or

# mirror level, then this will have to be changed.

if [[ -n "$publishers_extra_origins" ]]; then

	echo "$publishers_extra_origins" | while IFS="=" read pub pub_urls; do

		pub_prefix=$pub

		pub_add_origins=""

		for origin in $pub_urls; do

			pub_add_origins="${pub_add_origins}-g $origin "

		done

		# Retrieve publisher attributes. Since we are retrieving

		# these attributes from the GLOBAL zone, we must reset

		# PKG_IMAGE temporarily

		SAVE_PKG_IMAGE=$PKG_IMAGE

		PKG_IMAGE=$GZ_IMAGE

		export PKG_IMAGE

		attrs=$(get_publisher_attr_args $pub_prefix "origin")

		# Now restore the save PKG_IMAGE value

		PKG_IMAGE=$SAVE_PKG_IMAGE

		export PKG_IMAGE

		# --no-refresh is used here so that update operations can be

		# coalesced.

		LC_ALL=C $PKG set-publisher --no-refresh $attrs \

                    ${pub_add_origins}${pub_prefix} || fail_incomplete "$f_img"

	done

	if [[ -n "$publishers_extra_mirrors" ]]; then

		echo "$publishers_extra_mirrors" | \

		    while IFS="=" read pub pub_urls; do

			pub_prefix=$pub

			pub_add_mirrors=""

			for mirror in $pub_urls; do

				pub_add_mirrors="${pub_add_mirrors}-m $mirror "

			done

			# Retrieve publisher attributes. Since we are retrieving

			# these attributes from the GLOBAL zone, we must reset

			# PKG_IMAGE temporarily

			SAVE_PKG_IMAGE=$PKG_IMAGE

			PKG_IMAGE=$GZ_IMAGE

			export PKG_IMAGE

			attrs=$(get_publisher_attr_args $pub_prefix "mirror")

			PKG_IMAGE=$SAVE_PKG_IMAGE

			export PKG_IMAGE

			# --no-refresh is used here so that update operations

			# can be coalesced.

			LC_ALL=C $PKG set-publisher --no-refresh $attrs \

			    ${pub_add_mirrors}${pub_prefix} || \

			    fail_incomplete "$f_img"

		done

	fi

fi

# Now that all of the publisher configurations are in place, attempt a refresh.

# If this fails, assume the image is incomplete.

LC_ALL=C $PKG refresh || fail_incomplete "$f_img"

fi

#

# If we found an "entire" incorporation in the current image, then

# check to see if the user's choice of preferred publisher contains the

# version of the 'entire' incorporation needed.  This helps us to prevent

# mishaps in the event the user selected some weirdo publisher as their

# preferred one, or passed a preferred pub on the command line which doesn't

# have a suitable 'entire' in it.

#

# n.b. it would be nice to do this before we provision the zfs dataset, etc.

# but since the publisher specified by the user might not be known to

# the system, we can't do this test without first configuring the image.

#

if [[ -n $entire_fmri ]]; then

	printf "$m_incorp\n"

	LC_ALL=C $PKG list -af pkg://$publisher/$entire_fmri > /dev/null 2>&1

	if [[ $? -ne 0 ]]; then

		fail_fatal "$f_no_entire_in_pref" $entire_fmri $publisher

	fi

fi

printf "$m_core\n"

#