--- a/usr/src/pkgdefs/SUNWcsd/postinstall	Tue Aug 01 20:08:09 2006 -0700
+++ b/usr/src/pkgdefs/SUNWcsd/postinstall	Wed Aug 02 02:14:16 2006 -0700
@@ -3,9 +3,8 @@
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
-# Common Development and Distribution License, Version 1.0 only
-# (the "License").  You may not use this file except in compliance
-# with the License.
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
@@ -21,7 +20,7 @@
 # CDDL HEADER END
 #
 #
-# Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
+# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
 # Use is subject to license terms.
 #
 #pragma ident	"%Z%%M%	%I%	%E% SMI"
@@ -31,109 +30,75 @@
 #
 # SUNWcsd postinstall configuration
 #
-# To address various limitations of the packaging system with respect to
-# driver files, we provide a somewhat improved system within this script.
-# Driver file entries which must be created on the target system because
-# they are needed BEFORE drvconfig runs on the subsequent re-configuration
-# boot are added to the $prototype_* variable definitions below.  This script
-# processes these maps, creating driver nodes and symbolic links, and
-# updating the software database as necessary.
+# This file supplies /dev links needed in the install miniroot. The link
+# targets are automatically created by devfs as driver attaches.
+# The prototype_com, prototype_sparc, and prototype_i386 variables defined
+# below each consist of two whitespace-delimited columns, defined as follows:
 #
-# DO NOT add entries for drivers which are not needed before drvconfig runs
-# DO NOT copy any of this code to any other package script, OS/Net or otherwise
-# DO NOT hardcode minor numbers for clone drivers (use the driver name instead)
-#
-# The prototype_com, prototype_sparc, and prototype_i386 variables defined
-# below each consist of five whitespace-delimited columns, defined as follows:
-#
-# 1. Device Type - The single character 'b' (for block device) or 'c' (for
-# character device).  Used as an argument to installf(1M) and mknod(1M).
-#
-# 2. Device Path - Relative (should NOT begin with /) path to the device file
+# 1. Device Path - Relative (should NOT begin with /) path to the device file
 # to be created.  This base is interpreted relative to $BASEDIR (typically /a).
 #
-# 3. Driver Name - The name of the driver which should be used to determine
-# the major number for the device file.  This name should match the name of
-# a driver previously added to $BASEDIR/etc/name_to_major via add_drv.
-#
-# 4. Minor Number - The minor number for the device file.  If the minor number
-# is a sequence of digits, this literal minor number is used as the argument
-# to mknod(1M).  If it contains any non-digit characters, it is presumed to
-# be the name of a driver, and the corresponding major number from the
-# name_to_major file is substituted instead.  This is useful for clone entries.
-#
-# 5. Symbolic Link - The symlink to the device path which should be created.
-# This field may be left blank if no symlink is needed; if multiple links to
-# the same device are required, entries may be repeated with different links.
+# 2. Symbolic Link - The symlink to the device path which should be created.
 # The link should be a relative path to which $BASEDIR can be prepended.
 #
-# Following its creation, the driver entry is assigned permissions and
-# ownership according to the first matching entry in $BASEDIR/etc/minor_perm.
-# This script uses the same algorithm as drvconfig(1M) to match minor_perm
-# entries.  If no matching minor_perm entry is found, mode 0600, owner "root",
-# and group "sys" is assigned.
-#
 
 #
 # Common driver entries:
 #
 prototype_com='
-c devices/pseudo/arp@0:arp              arp             0       dev/arp
-c devices/pseudo/clone@0:ibd            clone           ibd     dev/ibd
-c devices/pseudo/icmp@0:icmp            icmp            0       dev/icmp
-c devices/pseudo/icmp@0:icmp            icmp            0       dev/rawip
-c devices/pseudo/icmp6@0:icmp6          icmp6           1       dev/icmp6
-c devices/pseudo/icmp6@0:icmp6          icmp6           1       dev/rawip6
-c devices/pseudo/ip@0:ip                ip              0       dev/ip
-c devices/pseudo/ip6@0:ip6              ip6             1       dev/ip6
-c devices/pseudo/rts@0:rts              rts             0       dev/rts
-c devices/pseudo/tcp@0:tcp              tcp             2       dev/tcp
-c devices/pseudo/tcp6@0:tcp6            tcp6            3       dev/tcp6
-c devices/pseudo/udp@0:udp              udp             0       dev/udp
-c devices/pseudo/udp6@0:udp6            udp6            1       dev/udp6
-c devices/pseudo/ipsecah@0:ipsecah      ipsecah         1       dev/ipsecah
-c devices/pseudo/ipsecesp@0:ipsecesp    ipsecesp        1       dev/ipsecesp
-c devices/pseudo/keysock@0:keysock      keysock         0       dev/keysock
-c devices/pseudo/cn@0:console           cn              0       dev/console
-c devices/pseudo/cn@0:syscon            cn              0       dev/syscon
-c devices/pseudo/cn@0:systty            cn              0       dev/systty
-c devices/pseudo/devinfo@0:devinfo      devinfo         0
-c devices/pseudo/ksyms@0:ksyms          ksyms           0       dev/ksyms
-c devices/pseudo/log@0:conslog          log             0       dev/conslog
-c devices/pseudo/log@0:log              log             5       dev/log
-c devices/pseudo/mm@0:mem               mm              0       dev/mem
-c devices/pseudo/mm@0:kmem              mm              1       dev/kmem
-c devices/pseudo/mm@0:null              mm              2       dev/null
-c devices/pseudo/mm@0:allkmem           mm              3       dev/allkmem
-c devices/pseudo/mm@0:zero              mm              12      dev/zero
-c devices/pseudo/openeepr@0:openprom    openeepr        0       dev/openprom
-c devices/pseudo/sad@0:admin            sad             1       dev/sad/admin
-c devices/pseudo/sad@0:user             sad             0       dev/sad/user
-c devices/pseudo/sy@0:tty               sy              0       dev/tty
-c devices/pseudo/sysevent@0:sysevent	sysevent	0       dev/sysevent
-c devices/pseudo/sysmsg@0:msglog        sysmsg          1       dev/msglog
-c devices/pseudo/sysmsg@0:sysmsg        sysmsg          0       dev/sysmsg
-c devices/pseudo/tl@0:ticots            tl              0       dev/ticots
-c devices/pseudo/tl@0:ticotsord         tl              1       dev/ticotsord
-c devices/pseudo/tl@0:ticlts            tl              2       dev/ticlts
-c devices/pseudo/wc@0:wscons            wc              0       dev/wscons
+devices/pseudo/arp@0:arp              dev/arp
+devices/pseudo/clone@0:ibd            dev/ibd
+devices/pseudo/icmp@0:icmp            dev/icmp
+devices/pseudo/icmp@0:icmp            dev/rawip
+devices/pseudo/icmp6@0:icmp6          dev/icmp6
+devices/pseudo/icmp6@0:icmp6          dev/rawip6
+devices/pseudo/ip@0:ip                dev/ip
+devices/pseudo/ip6@0:ip6              dev/ip6
+devices/pseudo/rts@0:rts              dev/rts
+devices/pseudo/tcp@0:tcp              dev/tcp
+devices/pseudo/tcp6@0:tcp6            dev/tcp6
+devices/pseudo/udp@0:udp              dev/udp
+devices/pseudo/udp6@0:udp6            dev/udp6
+devices/pseudo/ipsecah@0:ipsecah      dev/ipsecah
+devices/pseudo/ipsecesp@0:ipsecesp    dev/ipsecesp
+devices/pseudo/keysock@0:keysock      dev/keysock
+devices/pseudo/cn@0:console           dev/console
+devices/pseudo/cn@0:syscon            dev/syscon
+devices/pseudo/cn@0:systty            dev/systty
+devices/pseudo/ksyms@0:ksyms          dev/ksyms
+devices/pseudo/log@0:conslog          dev/conslog
+devices/pseudo/log@0:log              dev/log
+devices/pseudo/mm@0:mem               dev/mem
+devices/pseudo/mm@0:kmem              dev/kmem
+devices/pseudo/mm@0:null              dev/null
+devices/pseudo/mm@0:allkmem           dev/allkmem
+devices/pseudo/mm@0:zero              dev/zero
+devices/pseudo/openeepr@0:openprom    dev/openprom
+devices/pseudo/pm@0:pm                dev/pm
+devices/pseudo/sad@0:admin            dev/sad/admin
+devices/pseudo/sad@0:user             dev/sad/user
+devices/pseudo/sy@0:tty               dev/tty
+devices/pseudo/sysevent@0:sysevent    dev/sysevent
+devices/pseudo/sysmsg@0:msglog        dev/msglog
+devices/pseudo/sysmsg@0:sysmsg        dev/sysmsg
+devices/pseudo/tl@0:ticots            dev/ticots
+devices/pseudo/tl@0:ticotsord         dev/ticotsord
+devices/pseudo/tl@0:ticlts            dev/ticlts
+devices/pseudo/wc@0:wscons            dev/wscons
+devices/pseudo/zfs@0:zfs              dev/zfs
 '
 
 #
 # SPARC-specific driver entries:
 #
 prototype_sparc='
-c devices/pseudo/clone@0:eri            clone           eri     dev/eri
-c devices/pseudo/clone@0:hme            clone           hme     dev/hme
-c devices/pseudo/cvc@0:cvc              cvc             0
-c devices/pseudo/cvcredir@0:cvcredir    cvcredir        0
 '
 
 #
 # Intel-specific driver entries:
 #
 prototype_i386='
-c devices/pseudo/conskbd@0:kbd          conskbd         0       dev/kbd
+devices/pseudo/conskbd@0:kbd          dev/kbd
 '
 
 #
@@ -142,36 +107,12 @@
 # Below this point is the code to process the above $prototype_* maps.
 # You should not need to modify any code below this point to configure
 # new drivers.  You should also not need to add code here to remove
-# nodes and links created by a previous version of this package; the
-# pkghistory mechanism can be used to pkgrm SUNWcsd prior to its re-
-# installation, which will remove everything created by this script.
-#
-
-#
-# warn - Print an error message to stderr and also to our error log file
-#
-warn()
-{
-	echo "$PKG: $*" >& 2
-	echo "$PKG: $*" >> $errlog
-}
-
+# links created by a previous version of this package. All the links
+# can also be created by devfsadm link generators; the reason they
+# are also here is for the initial boot (miniroot or diskless client)
+# where certain devices must be present to get to the point when
+# devfsadm runs.
 #
-# name_to_major - Echo the major number of the given device driver to stdout.
-#
-name_to_major()
-{
-	awk '$1 == NAME { print $2; exit }' NAME=$1 $BASEDIR/etc/name_to_major
-}
-
-#
-# drv_alias - Return 0 (true) if $1 is a driver alias for $2
-#
-drv_alias()
-{
-	grep "^$1[	 ][	 ]*$2[	 ]" $BASEDIR/etc/driver_aliases \
-	    >/dev/null 2>&1
-}
 
 #
 # Determine an appropriate place for our private error log file.  If $PKGSAV
@@ -187,140 +128,24 @@
 	fi
 done
 
-#
-# If name_to_major or minor_perm is missing, then we're in big trouble (SUNWcsr
-# isn't installed yet, or the file has been subsequently deleted).
-#
-for file in name_to_major minor_perm; do
-	if [ ! -s $BASEDIR/etc/$file ]; then
-		warn "$BASEDIR/etc/$file is missing or zero-length"
-		warn "cannot proceed with device installation"
-		exit 1
-	fi
-done
-
 eval echo "\"\$prototype_com\"" "\"\$prototype_${ARCH}\"" | \
-while read type path driver minor symlink; do
-
-	[ -z "$type" ] && continue	# Skip blank lines
+while read path symlink; do
 
-	#
-	# Convert the driver name to the corresponding major number
-	# by looking it up in /etc/name_to_major.
-	#
-	major=`name_to_major $driver`
-	if [ -z "$major" ]; then
-		warn "major number for '$driver' not found"
-		warn "$path will not be created"
-		continue
-	fi
-
-	#
-	# If the minor number does not consist solely of digits, we assume
-	# it too is the name of a driver (this is typically done for clone
-	# entries), and so we convert it to the driver's major number.
-	#
-	if [ -z "`expr $minor : '^\([0-9][0-9]*\)$'`" ]; then
-		minor_num=`name_to_major $minor`
-		if [ -z "$minor_num" ]; then
-			warn "major number for '$minor' not found"
-			warn "$path will not be created"
-			continue
-		else
-			minor=$minor_num
-		fi
-	fi
+	[ -z "$path" ] && continue	# Skip blank lines
 
 	#
-	# Convert the driver path to two tokens used for matching entries in
-	# /etc/minor_perm: we strip the '@' address, and then obtain the
-	# drv_name (string prior to ':') and min_name (everything else).
+	# The link destination must be specified as an absolute path
+	# to installf.  The source we modify to be relative to the
+	# destination (each "/" becomes a "../" prefix); thus
+	# linkdst "dev/foo/bar" yields prefix "../../".
 	#
-	mp_ifs="$IFS"		# Save IFS (token separator list)
-	IFS=":$IFS"		# Add ':' as a separator for set and read below
-
-	shift $#; set -- `basename "$path" | sed 's/@[^:]*//'`
-	drv_name="$1"; shift
-	min_name="$*"
-
-	exec 3>&0 <$BASEDIR/etc/minor_perm	# Save stdin; open minor_perm
-	mp_match=no		# We have not yet seen a matching entry
-
-	while read mp_drvname mp_minname mode owner group; do
-
-		#
-		# The logic here is a bit confusing, but matches the equally
-		# confusing logic used to parse minor_perm entries in the
-		# drvconfig change_perm() function.
-		#
-		if [ $driver = $mp_drvname ] || [ $drv_name = clone -a \
-		   \( $mp_drvname = clone -o $mp_drvname = $min_name \) ] || \
-		   ( [ $drv_name = $mp_drvname ] && \
-		   drv_alias $driver $drv_name ); then
-
-			#
-			# If we have a driver name match, see if globbing the
-			# minor_perm pattern matches min_name.
-			#
-			case "$min_name" in
-			$mp_minname)
-				mp_match=yes
-				break
-				;;
-			esac
-		fi
-	done
-
-	IFS="$mp_ifs"		# Restore IFS
-	exec 0<&3 3>&-		# Restore stdin to the $prototype_* pipeline
+	lprefix=`echo "$symlink" | sed 's:[^/]*::g;s:/:../:g'`
+	linksrc="$lprefix$path"
+	linkdst="/$symlink"
 
-	if [ $mp_match = no ]; then
-		mode=0600	# Default values should be secure
-		owner=root
-		group=sys
-
-		warn "no minor_perm entry matched $path"
-		warn "defaulting to $mode $owner $group"
-	fi
-	
-	echo "add $type $path ($major, $minor) $mode $owner $group"
-	rm -f $BASEDIR/$path
-
-	if mknod $BASEDIR/$path $type $major $minor; then
-
-		installf -c none $PKGINST $BASEDIR/$path $type \
-		    $major $minor $mode $owner $group || \
-			warn "failed to add $path to pkg database"
-
-		chown $owner $BASEDIR/$path
-		chgrp $group $BASEDIR/$path
-		chmod $mode $BASEDIR/$path
-	else
-		warn "failed to mknod $path"
-		continue
-	fi
-
-	if [ -n "$symlink" ]; then
-		#
-		# The link destination must be specified as an absolute path
-		# to installf.  The source we modify to be relative to the
-		# destination (each "/" becomes a "../" prefix); thus
-		# linkdst "dev/foo/bar" yields prefix "../../".
-		#
-                lprefix=`echo "$symlink" | sed 's:[^/]*::g;s:/:../:g'`
-		linksrc="$lprefix$path"
-                linkdst="/$symlink"
-
-                echo "add link $linkdst=$linksrc"
-
-		#
-		# We don't actually need to create the symlink at this time
-		# because the installf -f at the end will create all symlinks.
-		# We pipe the link description to installf instead of putting
-		# it on the command-line to work around installf broken-ness.
-		#
-		echo "$linkdst=$linksrc s" | installf -c none $PKGINST - || \
-		    warn "failed to add $linkdst to pkg database"
+	if [ ! -L ${BASEDIR}$linkdst ]; then
+		echo "add link $linkdst=$linksrc"
+		ln -s $linksrc ${BASEDIR}$linkdst
 	fi
 done
 
@@ -348,5 +173,4 @@
 	chmod 444 ${BASEDIR}/devices/README
 fi
 
-installf -f $PKGINST || warn "failed to update pkg database"
-[ -s $errlog ] && exit 2 || exit 0
+exit 0

--- a/usr/src/psm/stand/boot/sparc/common/bootprop.c	Tue Aug 01 20:08:09 2006 -0700
+++ b/usr/src/psm/stand/boot/sparc/common/bootprop.c	Wed Aug 02 02:14:16 2006 -0700
@@ -2,9 +2,8 @@
  * CDDL HEADER START
  *
  * The contents of this file are subject to the terms of the
- * Common Development and Distribution License, Version 1.0 only
- * (the "License").  You may not use this file except in compliance
- * with the License.
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
  *
  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
  * or http://www.opensolaris.org/os/licensing.
@@ -20,7 +19,7 @@
  * CDDL HEADER END
  */
 /*
- * Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
+ * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
  * Use is subject to license terms.
  */
 
@@ -162,7 +161,6 @@
 			}
 		}
 	}
-	printf("Property (%s) not supported by %s\n", name, my_own_name);
 	return (BOOT_BADPROP);
 }