equal
deleted
inserted
replaced
|
1 NETWORK |
|
2 |
|
3 This screen prompts you to type a computer host name and to specify how the network connection should be configured. |
|
4 |
|
5 PROCEDURE |
|
6 |
|
7 To exit this help screen, press F3. Then, in the installer screen, enter network information as follows: |
|
8 |
|
9 * COMPUTER NAME - This screen includes an editable field for the computer name. The editable field is highlighted. With the computer host name field selected, type a name for this computer that identifies it on the network. Note the following restrictions: |
|
10 |
|
11 * The host name must be at least two characters. |
|
12 * The host name can contain letters, numbers, and minus signs (-). |
|
13 |
|
14 * NETWORK CONNECTION - Use the arrow keys to select a network connection choice from the following options: |
|
15 |
|
16 Automatically - Use DHCP to configure the connection. |
|
17 Manually - If you select this option, you will select and configure a wired network interface on the following screens. |
|
18 None - Do not configure the network during the installation. |
|
19 |
|
20 Press F2 to continue to the next screen. |
|
21 |
|
22 NAVIGATION |
|
23 |
|
24 Use the function keys listed at the bottom of each screen to navigate between screens. Use the arrow keys to move through the text on each screen. |
|
25 |
|
26 Note: If your keyboard does not have function keys, or the keys do not respond, press ESC to view the alternate ESC keys for navigation. |