TEST_32 =		$(BUILD_DIR_32)/.tested

TEST_64 =		$(BUILD_DIR_64)/.tested

TEST_32_and_64 =	$(TEST_32) $(TEST_64)

CC.studio.32 =	$(SPRO_VROOT)/bin/cc

CCC.studio.32 =	$(SPRO_VROOT)/bin/CC

CC.studio.64 =	$(SPRO_VROOT)/bin/cc

CCC.studio.64 =	$(SPRO_VROOT)/bin/CC

GPATCH_BACKUP =	--backup --version-control=numbered

GPATCH_FLAGS =	-p$(PATCH_LEVEL) $(GPATCH_BACKUP)

# C preprocessor flag sets to ease feature selection.  Add the required

# feature to your Makefile with CPPFLAGS += $(FEATURE_MACRO) and add to

# the component build with CONFIGURE_OPTIONS += CPPFLAGS="$(CPPFLAGS)" or

# similiar.

#

# Enables visibility of some c99 math functions that aren't visible by default.

# What other side-effects are there?

CPP_C99_EXTENDED_MATH =	-D_STDC_99

# Enables large file support for components that have no other means of doing

# so.  Use CPP_LARGEFILES and not the .32/.64 variety directly

CPP_LARGEFILES.32 =	$(shell getconf LFS_CFLAGS)

CPP_LARGEFILES.64 =	$(shell getconf LFS64_CFLAGS)

CPP_LARGEFILES =		$(CPP_LARGEFILES.$(BITS))

# Enables some #pragma redefine_extname to POSIX-compliant Standard C Library

# functions. Also avoids the component's #define _POSIX_C_SOURCE to some value

# we currently do not support.

CPP_POSIX =	-D_POSIX_C_SOURCE=200112L -D_POSIX_PTHREAD_SEMANTICS

# shell, /usr/xpg4/bin/sh, instead of /usr/bin/sh.  Add studio_XPG6MODE to

# CFLAGS instead of using this directly

CPP_XPG6MODE=	-D_XOPEN_SOURCE=600 -D__EXTENSIONS__=1 -D_XPG6

#

# Studio C compiler flag sets to ease feature selection.  Add the required

# feature to your Makefile with CFLAGS += $(FEATURE_MACRO) and add to the

# component build with CONFIGURE_OPTIONS += CFLAGS="$(CFLAGS)" or similiar.

#

# Generate 32/64 bit objects

CC_BITS =	-m$(BITS)

# Code generation instruction set and optimization 'hints'.  Use studio_XBITS

# and not the .arch.bits variety directly.

studio_XBITS.sparc.32 =	-xtarget=ultra2 -xarch=sparcvis -xchip=ultra2

studio_XBITS.sparc.64 =	-xtarget=ultra2 -xarch=sparcvis -xchip=ultra2

studio_XBITS.i386.32 =	-xarch=pentium

studio_XBITS.i386.64 =	-xarch=generic64 -Ui386 -U__i386

studio_XBITS = $(studio_XBITS.$(ARCH).$(BITS))

# Turn on recognition of supported C99 language features and enable the 1999 C

# standard library semantics of routines that appear in	both the 1990 and

# 1999 C standard. To use set studio_C99MODE=$(studio_99_ENABLE) in your

# component Makefile.

studio_C99_ENABLE =		-xc99=all

# Turn off recognition of C99 language features, and do not enable the 1999 C

# standard library semantics of routines that appeared in both the 1990	and

# 1999 C standard.  To use set studio_C99MODE=$(studio_99_DISABLE) in your

# component Makefile.

studio_C99_DISABLE =	-xc99=none

# Use the compiler default 'xc99=all,no_lib'

studio_C99MODE =

# Allow zero-sized struct/union declarations and void functions with return

# statements.

studio_FEATURES_EXTENSIONS =	-features=extensions

# Control the Studio optimization level.

studio_OPT.sparc.32 =	-x04

studio_OPT.sparc.64 =	-x04

studio_OPT.i386.32 =	-x04

studio_OPT.i386.64 =	-x04

studio_OPT =		$(studio_OPT.$(ARCH).$(BITS))

# Studio PIC code generation.  Use CC_PIC instead to select PIC code generation.

studio_PIC = 	-KPIC -DPIC

# This is used through studio_IROPTS, not the 'sparc' variety.

studio_IROPTS.sparc =	-W2,-xwrap_int

studio_IROPTS =		$(studio_IROPTS.$(ARCH))

# Control register usage for generated code.  SPARC ABI requires system

# libraries not to use application registers.  x86 requires 'no%frameptr' at

# x04 or higher.

studio_XREGS.sparc =	-xregs=no%appl,float

studio_XREGS.i386 =	-xregs=no%frameptr

studio_XREGS =		$(studio_XREGS.$(ARCH))

# See CPP_XPG6MODE comment above.

studio_XPG6MODE =	$(studio_C99MODE) $(CPP_XPG6MODE)

XPG6MODE =		$(studio_XPG6MODE)

# Default Studio C compiler flags.  Add the required feature to your Makefile

# with CFLAGS += $(FEATURE_MACRO) and add to the component build with

# CONFIGURE_OPTIONS += CFLAGS="$(CFLAGS)" or similiar.  In most cases, it

# should not be necessary to add CFLAGS to any environment other than the

# configure environment.

CFLAGS.studio +=	$(studio_OPT) $(studio_XBITS) $(studio_XREGS) \

			$(studio_IROPTS) $(studio_C99MODE)

#

# GNU C compiler flag sets to ease feature selection.  Add the required

# feature to your Makefile with CFLAGS += $(FEATURE_MACRO) and add to the

# component build with CONFIGURE_OPTIONS += CFLAGS="$(CFLAGS)" or similiar.

#

# GCC Compiler optimization flag

gcc_OPT =	-O3

# GCC PIC code generation.  Use CC_PIC instead to select PIC code generation.

gcc_PIC =	-fPIC -DPIC

# Generic macro for PIC code generation.  Use this macro instead of the

# compiler specific variant.

CC_PIC =	$($(COMPILER)_PIC)

# Default GNU C compiler flags.  Add the required feature to your Makefile

# with CFLAGS += $(FEATURE_MACRO) and add to the component build with

# CONFIGURE_OPTIONS += CFLAGS="$(CFLAGS)" or similiar.  In most cases, it

# should not be necessary to add CFLAGS to any environment other than the

# configure environment.

CFLAGS.gcc +=	$(gcc_OPT)

# Build 32 or 64 bit objects.

CFLAGS +=	$(CC_BITS)

# Add compiler specific 'default' features

CFLAGS +=	$(CFLAGS.$(COMPILER))

#

# Solaris linker flag sets to ease feature selection.  Add the required

# feature to your Makefile with LDFLAGS += $(FEATURE_MACRO) and add to the

# component build with CONFIGURE_OPTIONS += LDFLAGS="$(LDFLAGS)" or similiar.

#

# Reduce the symbol table size, effectively conflicting with -g.  We should

# get linker guidance here.

LD_Z_REDLOCSYM =	-z redlocsym

# Cause the linker to rescan archive libraries and resolve remaining unresolved

# symbols recursively until all symbols are resolved.  Components should be

# linking in the libraries they need, in the required order.  This should

# only be required if the component's native build is horribly broken.

LD_Z_RESCAN_NOW =	-z rescan-now

LD_Z_TEXT =		-z direct

# make sure all symbols are defined.

LD_Z_DEFS =		-z defs

# use direct binding

LD_B_DIRECT =		-Bdirect

#

# More Solaris linker flags that we want to be sure that everyone gets.  This

# is automatically added to the calling environment during the 'build' and

# 'install' phases of the component build.  Each individual feature can be

# turned off by adding FEATURE_MACRO= to the component Makefile.

#

# Create a non-executable stack when linking.

LD_MAP_NOEXSTK =	-M /usr/lib/ld/map.noexstk

# Create a non-executable bss segment when linking.

LD_MAP_NOEXBSS =	-M /usr/lib/ld/map.noexbss

# Create a non-executable data segment when linking.  Due to PLT needs, the

# data segment must be executable on sparc, but the bss does not.

# see mapfile comments for more information

LD_MAP_NOEXDATA.i386 =	-M /usr/lib/ld/map.noexdata

LD_MAP_NOEXDATA.sparc =	$(LD_MAP_NOEXBSS)

# Page alignment

LD_MAP_PAGEALIGN =	-M /usr/lib/ld/map.pagealign

# Linker options to add when only building libraries

LD_OPTIONS_SO +=	$(LD_Z_TEXT) $(LD_Z_DEFS)

# Default linker options that everyone should get.  Do not add additional

# libraries to this macro, as it will apply to everything linked during the

# component build.

LD_OPTIONS +=	$(LD_MAP_NOEXSTK) $(LD_MAP_NOEXDATA.$(ARCH)) \

		$(LD_MAP_PAGEALIGN) $(LD_B_DIRECT)